xnu-1504.3.12.tar.gz

[apple/xnu.git] / bsd / conf / MASTER

#
# Mach Operating System
# Copyright (c) 1986 Carnegie-Mellon University
# All rights reserved.  The CMU software License Agreement
# specifies the terms and conditions for use and redistribution.
#  
#######################################################################
#
#       Master machine independent configuration file.
#
#       Specific configuration files are created based on this and
#       the machine specific master file using the doconf script.
#
#       Any changes to the master configuration files will affect all
#       other configuration files based upon it.
#
#######################################################################
#
#       To build a configuration, execute "doconf <configuration>."
#       Configurations are specified in the "Configurations:" section
#       of the MASTER and MASTER.* files as follows:
#
#       <configuration> = [ <attribute0> <attribute1> ... <attributeN> ]
#
#       Lines in the MASTER and MASTER.* files are selected based on
#       the attribute selector list, found in a comment at the end of
#       the line.  This is a list of attributes separated by commas.
#       The "!" operator selects the line if none of the attributes are
#       specified.
#
#       For example:
#
#       <foo,bar>       selects a line if "foo" or "bar" are specified.
#       <!foo,bar>      selects a line if neither "foo" nor "bar" is
#                       specified.
#
#       Lines with no attributes specified are selected for all
#       configurations.
#
#######################################################################
#
#  STANDARD CONFIGURATION OPTIONS (select any combination)
#
#       debug   = extra kernel level debugging support
#       mach    = Mach support 
#
#  EXPERIMENTAL CONFIGURATION OPTIONS (select any combination, carefully)
#
#       host    = host resource control support
#
#  MULTI-PROCESSOR CONFIGURATION (select at most one)
#
#       multi16 = enable 16 multi-processors
#       multi32 = enable 32 multi-processors
#       multi48 = enable 48 multi-processors
#
#  SYSTEM SIZE CONFIGURATION (select exactly one)
#
#       xlarge = extra large scale system configuration
#       large  = large scale system configuration
#       medium = medium scale system configuration
#       small  = small scale system configuration
#       xsmall = extra small scale system configuration
#       bsmall = special extra small scale system configuration 
#
#######################################################################
#  
#  Standard Mach Research Configurations:
#  -------- ---- -------- ---------------
#
#  These are the default configurations that can be used by most sites.
#  They are used internally by the Mach project.
#
#  MACH      = [mach multi16 medium debug]
#
#######################################################################
#
ident           NeXT

# obsolete timezone spec
options         TIMEZONE=0, PST=0

options         QUOTA                   #                               # <quota>
options         INET                    #                               # <inet>
options         ABSOLUTETIME_SCALAR_TYPE
options         NEW_VM_CODE     #                               # <newvm>
options         OLD_VM_CODE     #                               # <!newvm>
options         HW_AST          # Hardware ast support          # <hw_ast>
options         HW_FOOTPRINT    # Cache footprint support       # <hw_foot>
options         CONFIG_LCTX     # Login Context

options         MACH            # Standard Mach features        # <mach>
options         MACH_ASSERT     # Compile in assertions         # <mach_assert>
options         MACH_COMPAT     # Vendor syscall compatibility  # <mach>
options         MACH_COUNTERS   # counters                      # <count>
options         MACH_DEBUG      # IPC debugging interface       # <mdebug>
options         MACH_FASTLINK   # Fast symbolic links
options         MACH_FIXPRI     # Fixed priority threads        # <fixpri>
options         MACH_HOST       # Mach host (resource alloc.)   # <host>
options         MACH_IPC_COMPAT # Enable old IPC interface      # <ipc_compat>
options         MACH_IPC_DEBUG  # Enable IPC debugging calls    # <ipc_debug>
options         MACH_IPC_TEST   # Testing code/printfs          # <ipc_test>
options         MACH_LDEBUG     # Sanity-check simple locking   # <test>
options         MACH_NP         # Mach IPC support              # <np>
options         MACH_NBC        # No buffer cache               # <nbc>
options         MACH_NET        # Fast network access           # <mach_net>
options         MACH_XP         # external pager support        # <xp>
options         NORMA_IPC       # NORMA IPC support             # <norma_ipc>
options         NORMA_DEVICE    # NORMA unified device names    # <norma_device>
options         NORMA_VM        # NORMA virtual memory support  # <norma_vm>
options         NORMA_TASK      # NORMA task support            # <norma_task>
options         NORMA_ETHER     # NORMA across ethernet         # <norma_ether>
options         SIMPLE_CLOCK    # don't assume fixed tick       # <simple_clock>
options         XPR_DEBUG       # kernel tracing                # <xpr_debug>
options         KDEBUG          # kernel tracing                # <kdebug>
options         DDM_DEBUG       # driverkit-style tracing       # <ddm_debug>
options         MACH_OLD_VM_COPY # Old vm_copy technology       # <!newvm>
options         NO_DIRECT_RPC   # for untyped mig servers       # 
options         IPX             # ipx stack                     # <ipx>
options         EON             #                               # <eon>
options         ISO             # ISO stack                     # <iso>
options         LLC             # 802.2 support                 # <llc>
options         LOOP            # loopback support              # <loop>
options         MROUTING        # multicast routing             # <mrouting>
options         ROUTING         # routing                       # <routing>
options         NETMIBS         #                               # <netmibs>
options         VLAN            #                               # <vlan>
options         BOND            #                               # <bond>
options         PF              # Packet Filter                 # <pf>
options         PF_PKTHDR       # PF tag inside mbuf pkthdr     # <pf_pkthdr>
options         PFLOG           # PF log interface              # <pflog>
options         IPDIVERT        # Divert sockets (for NAT)      # <ipdivert>
options         IPFLOW          # IP fast forwarding            # <ipflow>
options         IPFIREWALL      # IP Firewalling (used by NAT)  # <ipfirewall>
options         IPFIREWALL_FORWARD      #Transparent proxy      # <ipfirewall>
options         IPFIREWALL_DEFAULT_TO_ACCEPT    # allow everything by default   # <ipfirewall>
options         DUMMYNET        # dummynet support              # <dummynet>
options         TRAFFIC_MGT     # traffic management support            # <traffic_mgt>
options         IPFW2           # IP firewall (new version)     # <ipfw2>
options         MULTICAST       # Internet Protocol Class-D     $
options         TCPDEBUG        # TCP debug                     # <tcpdebug>
options         RANDOM_IP_ID    # random (not sequential) ip ids        # <randomipid>
options         TCP_DROP_SYNFIN # Drop TCP packets with SYN+FIN set     # <tcpdrop_synfin>
options         ICMP_BANDLIM    # ICMP bandwidth limiting sysctl
options         IFNET_INPUT_SANITY_CHK  # allow dlil/ifnet input sanity check # <ifnet_input_chk>
options         SYSV_SEM        # SVID semaphores                       # <sysv_sem>
options         SYSV_MSG        # SVID messages                         # <sysv_msg>
options         SYSV_SHM        # SVID shared mem                       # <sysv_shm>
options         PSYNCH          # pthread synch                         # <psynch>
options         PANIC_INFO      # want kernel panic info        # <panic_info>
options         DEVELOPMENT     # dev kernel                            # <development>

# secure_kernel - secure kernel from user programs
options     SECURE_KERNEL       # <secure_kernel> 

options     OLD_SEMWAIT_SIGNAL  # old semwait_signal handler

#
#       4.4 general kernel 
#
options         SOCKETS         # socket support                        # <inet, inet6, netat>
options         DIAGNOSTIC      # diagnostics                           # <diagnostic>
options         CONFIG_DTRACE   # dtrace support                        # <config_dtrace>
options         GPROF           # build profiling                       # <profile>
options         SENDFILE        # sendfile                                      # <sendfile>
options         NETWORKING      # networking layer                      # <inet, inet6, netat>
options         CONFIG_FSE      # file system events            # <config_fse>
options         CONFIG_IMAGEBOOT        # local image boot      # <config_imageboot>
options         CONFIG_SOWUPCALL        # SB_UPCALL on sowwakeup        # <config_sowupcall>
options         CONFIG_MBUF_NOEXPAND    # limit mbuf expansion  # <config_mbuf_noexpand>
options         CONFIG_MBUF_JUMBO       # jumbo cluster pool    # <config_mbuf_jumbo>
options         CONFIG_MBUF_TAGS_MALLOC # use malloc for tags   # <config_mbuf_tags_malloc>
options         CONFIG_FORCE_OUT_IFP    # Enable IP_FORCE_OUT_IFP # <config_force_out_ifp>
options         CONFIG_IFEF_NOWINDOWSCALE # Scale TCP window per driver # <config_ifef_nowindowscale>

options         CONFIG_WORKQUEUE        # <config_workqueue>


#
#       4.4 filesystems 
#
options         FFS                     # Fast Filesystem Support       # <ffs>
options         HFS                     # HFS/HFS+ support              # <hfs>
options         FIFO            # fifo support                  # <fifo>
options         UNION           # union_fs support              # <union>
options         FDESC           # fdesc_fs support              # <fdesc>
options         DEVFS           # devfs support                 # <devfs>
options         JOURNALING      # journaling support    # <journaling>
options         HFS_COMPRESSION # hfs compression       # <hfs_compression>

#
#       file system features
#
options         QUOTA           # file system quotas            # <quota>
options         REV_ENDIAN_FS   # Reverse Endian FS             # <revfs>
options         NAMEDSTREAMS    # named stream vnop support     # <namedstreams>
options         CONFIG_VOLFS    # volfs path support (legacy)   # <config_volfs>
options         CONFIG_IMGSRC_ACCESS # source of imageboot dmg  # <config_imgsrc_access>

#
# NFS support
#
options         NFSCLIENT       # Be an NFS client              # <nfsclient>
options         NFSSERVER       # Be an NFS server              # <nfsserver>

#
# AppleTalk Support
#
options         NETAT                   # AppleTalk support                             # <netat>
#options                AURP_SUPPORT    # AppleTalk Update Routing      # <netat>

#
# Machine Independent Apple Features
#
options         KERNSERV        # kernel_server intarface       # <kernserv>
options         MALLOCDEBUG     # kernel malloc debugging       # <mallocdebug>
options         DRIVERKIT       # driverkit support             # <driverkit>
options         KERNOBJC        # Objective-C support           # <kernobjc>
options         OBJCTEST        # Objc internal test            # <objctest>
options         KERNEL_STACK    # MI kernel stack support       # <kernstack>
profile                                         # build a profiling kernel      # <profile>

#
#  Point-to-Point Protocol support
#
pseudo-device ppp 2                                             # <ppp>

#       
# IPv6 Support
#       
options         "INET6"                         # kernel IPv6 Support           # <inet6>
options         IPSEC                           # IP security                   # <ipsec>
options         IPSEC_ESP                       # IP security                   # <ipsec>
options         "IPV6FIREWALL"                  # IPv6 Firewall Feature         # <ipv6firewall>
options         "IPV6FIREWALL_DEFAULT_TO_ACCEPT"        #IPv6 Firewall Feature          # <ipv6firewall>
#options         "IPV6FIREWALL_VERBOSE"                 #IPv6 Firewall Feature          # <ipv6firewall>

pseudo-device   gif     1               # <gif>
pseudo-device   dummy   2               # <dummy>
pseudo-device   faith   1               # <faith>
pseudo-device   stf     1               # <stf>

options                 crypto                  # <ipsec,crypto>
options                 ALLCRYPTO               # <xlarge,large,medium>
options                 randomipid              # <inet,randomipid>

options         ZLIB            # inflate/deflate support       # <zlib>

options         IF_BRIDGE                       # <if_bridge>

makeoptions     LIBDRIVER = "libDriver_kern.o"                  # <libdriver>
makeoptions     LIBOBJC   = "libkobjc.o"                        # <kernobjc>

maxusers        64              # <xlarge>
maxusers        50              # <large>
maxusers        32              # <medium>
maxusers        16              # <small>
maxusers        8               # <xsmall>
maxusers        2               # <bsmall>

#
#  Multi-processor selection
#
pseudo-device   cpus            64      # <multi64>
pseudo-device   cpus            32      # <multi32>
pseudo-device   cpus            16      # <multi16>
pseudo-device   cpus            2       # <multi2>
pseudo-device   cpus            1       # <!multi64,multi32,multi16,multi2>

#
#  configurable kernel event related resources 
#
options   CONFIG_KN_HASHSIZE=64         # <medium,large,xlarge>
options   CONFIG_KN_HASHSIZE=48         # <small,xsmall>
options   CONFIG_KN_HASHSIZE=20         # <bsmall>

#
#  configurable vfs related resources 
#  CONFIG_VNODES - used to pre allocate vnode related resources 
#  CONFIG_VNODE_FREE_MIN - mininmum number of free vnodes 
#  CONFIG_NC_HASH - name cache hash table allocation
#  CONFIG_VFS_NAMES - name strings
#
#  263168 magic number for medium CONFIG_VNODES is based on memory 
#  Number vnodes  is (memsize/64k) + 1024 
#  This is the calculation that is used by launchd in tiger
#  we are clipping the max based on 16G 
#  ie ((16*1024*1024*1024)/(64 *1024)) + 1024 = 263168;

options   CONFIG_VNODES=263168          # <large,xlarge>
options   CONFIG_VNODES=263168          # <medium>
options   CONFIG_VNODES=10240           # <small>
options   CONFIG_VNODES=1024            # <xsmall>
options   CONFIG_VNODES=750                     # <bsmall>

options   CONFIG_VNODE_FREE_MIN=500             # <large,xlarge>
options   CONFIG_VNODE_FREE_MIN=300             # <medium>
options   CONFIG_VNODE_FREE_MIN=200             # <small>
options   CONFIG_VNODE_FREE_MIN=100             # <xsmall>
options   CONFIG_VNODE_FREE_MIN=75              # <bsmall>

options   CONFIG_NC_HASH=5120           # <large,xlarge>
options   CONFIG_NC_HASH=4096           # <medium>
options   CONFIG_NC_HASH=2048           # <small,xsmall>
options   CONFIG_NC_HASH=1024           # <bsmall>

options   CONFIG_VFS_NAMES=5120         # <large,xlarge>
options   CONFIG_VFS_NAMES=4096         # <medium>
options   CONFIG_VFS_NAMES=3072         # <small,xsmall>
options   CONFIG_VFS_NAMES=2048         # <bsmall>

options   CONFIG_MAX_CLUSTERS=8         # <xlarge,large,medium>
options   CONFIG_MAX_CLUSTERS=4         # <small,xsmall,bsmall>

#
#  configurable kauth credential related resources 
#
options   KAUTH_CRED_PRIMES_COUNT=7             # <medium,large,xlarge>
options   KAUTH_CRED_PRIMES_COUNT=3             # <bsmall,xsmall,small>

options   KAUTH_CRED_PRIMES="{97, 241, 397, 743, 1499, 3989, 7499}"             # <medium,large,xlarge>
options   KAUTH_CRED_PRIMES="{5, 17, 97}"                                                               # <bsmall,xsmall,small>

#
#  configurable options for minumum number of buffers for kernel memory 
#
options   CONFIG_MIN_NBUF=256           # <medium,large,xlarge>
options   CONFIG_MIN_NBUF=128           # <small>
options   CONFIG_MIN_NBUF=80            # <xsmall>
options   CONFIG_MIN_NBUF=64            # <bsmall>

options   CONFIG_MIN_NIOBUF=128         # <medium,large,xlarge>
options   CONFIG_MIN_NIOBUF=64          # <xsmall,small>
options   CONFIG_MIN_NIOBUF=32          # <bsmall>

#
# set maximum space used for packet buffers
#
options        CONFIG_NMBCLUSTERS="((1024 * 1024) / MCLBYTES)"          # <large,xlarge>
options        CONFIG_NMBCLUSTERS="((1024 * 512) / MCLBYTES)"           # <medium>
options        CONFIG_NMBCLUSTERS="((1024 * 256) / MCLBYTES)"           # <bsmall,xsmall,small>

#
# set maximum space used for packet buffers
#
options CONFIG_USESOCKTHRESHOLD=1       # <large,xlarge,medium>
options CONFIG_USESOCKTHRESHOLD=0       # <bsmall,xsmall,small>

#
# Configure size of TCP hash table
#
options CONFIG_TCBHASHSIZE=4096         # <medium,large,xlarge>
options CONFIG_TCBHASHSIZE=128          # <xsmall,small,bsmall>

#
#  configurable async IO options 
#  CONFIG_AIO_MAX - system wide limit of async IO requests.
#  CONFIG_AIO_PROCESS_MAX - process limit of async IO requests.
#  CONFIG_AIO_THREAD_COUNT - number of async IO worker threads created.
#
options   CONFIG_AIO_MAX=360            # <xlarge>
options   CONFIG_AIO_MAX=180            # <large>
options   CONFIG_AIO_MAX=90                     # <medium>
options   CONFIG_AIO_MAX=45                     # <small>
options   CONFIG_AIO_MAX=20                     # <xsmall>
options   CONFIG_AIO_MAX=10                     # <bsmall>

options   CONFIG_AIO_PROCESS_MAX=64             # <xlarge>
options   CONFIG_AIO_PROCESS_MAX=32             # <large>
options   CONFIG_AIO_PROCESS_MAX=16             # <medium>
options   CONFIG_AIO_PROCESS_MAX=12             # <small>
options   CONFIG_AIO_PROCESS_MAX=8              # <xsmall>
options   CONFIG_AIO_PROCESS_MAX=4              # <bsmall>

options   CONFIG_AIO_THREAD_COUNT=16    # <xlarge>
options   CONFIG_AIO_THREAD_COUNT=8             # <large>
options   CONFIG_AIO_THREAD_COUNT=4             # <medium>
options   CONFIG_AIO_THREAD_COUNT=3             # <small>
options   CONFIG_AIO_THREAD_COUNT=2             # <xsmall,bsmall>

#
#  configurable kernel related resources (CONFIG_THREAD_MAX needs to stay in 
#  sync with osfmk/conf/MASTER until we fix the config system...) todo XXX
#
options   CONFIG_THREAD_MAX=2560                # <medium,large,xlarge>
options   CONFIG_THREAD_MAX=1536                # <small,xsmall>
options   CONFIG_THREAD_MAX=1024                # <bsmall>

options   CONFIG_MAXVIFS=32                             # <medium,large,xlarge>
options   CONFIG_MAXVIFS=16                             # <small,xsmall>
options   CONFIG_MAXVIFS=2                              # <bsmall>

options   CONFIG_MFCTBLSIZ=256                  # <medium,large,xlarge>
options   CONFIG_MFCTBLSIZ=128                  # <small,xsmall>
options   CONFIG_MFCTBLSIZ=16                   # <bsmall>

#
#  configurable kernel - use these options to strip strings from panic
#  and printf calls.
#  no_panic_str - saves around 50K of kernel footprint.
#  no_printf_str - saves around 45K of kernel footprint.
#
options   CONFIG_NO_PANIC_STRINGS               # <no_panic_str>
options   CONFIG_NO_PRINTF_STRINGS              # <no_printf_str>
options   CONFIG_NO_KPRINTF_STRINGS             # <no_kprintf_str>

#
# configurable kernel - general switch to say we are building for an
# embedded device
#
options   CONFIG_EMBEDDED                       # <config_embedded>

# only execute signed code. Hang this off config_embedded since there's
# nothing more appropriate right now
#
options   CONFIG_ENFORCE_SIGNED_CODE            # <config_embedded>

# support dynamic signing of code
#
options         CONFIG_DYNAMIC_CODE_SIGNING     # <dynamic_codesigning>

#
# code decryption... used on embedded for app protection
# must be set in all the bsd/conf and osfmk/conf MASTER files
#
options         CONFIG_CODE_DECRYPTION  # <config_embedded>


#
#  Ethernet (ARP)
#
pseudo-device   ether                   # <networking,inet,inet6,netat>
#
#  Network loopback device
#
pseudo-device   loop                    # <networking,inet,inet6,netat>
#
#  UCB pseudo terminal service
#
pseudo-device  pty     512 init pty_init       # <xlarge>
pseudo-device  pty     256 init pty_init       # <large>
pseudo-device  pty     128 init pty_init       # <medium>
pseudo-device  pty      48 init pty_init       # <small>
pseudo-device  pty      16 init pty_init       # <xsmall>
pseudo-device  pty       8 init pty_init       # <bsmall>
#
# Cloning pseudo terminal service
#
pseudo-device   ptmx    1 init ptmx_init

#
# vnode device
#
pseudo-device  vndevice    16       init    vndevice_init   # <xlarge>
pseudo-device  vndevice         8       init    vndevice_init   # <large>
pseudo-device  vndevice         4       init    vndevice_init   # <medium>
pseudo-device  vndevice         3       init    vndevice_init   # <small>
pseudo-device  vndevice         2       init    vndevice_init   # <bsmall>

#
# memory device
pseudo-device   mdevdevice      1       init    mdevinit

#
#
# packet filter device
#
pseudo-device   bpfilter        4       init    bpf_init                # <networking,inet,inet6,netat>

#
# fsevents device
pseudo-device   fsevents        1       init    fsevents_init   # <config_fse>

#
#  shim to "linux" mach disk drivers  (mach drivers must also be turned on)
#
# now using iokit disk shim, this is code is obsolete
#pseudo-device diskshim

pseudo-device   random          1       init    random_init
pseudo-device   dtrace          1       init    dtrace_init     # <config_dtrace>
pseudo-device   helper          1       init    helper_init     # <config_dtrace>
pseudo-device   lockstat        1       init    lockstat_init   # <config_dtrace>
pseudo-device   sdt             1       init    sdt_init        # <config_dtrace>
pseudo-device   systrace        1       init    systrace_init   # <config_dtrace>
pseudo-device   fbt             1       init    fbt_init        # <config_dtrace>
pseudo-device   profile_prvd    1       init    profile_init    # <config_dtrace>