bsd/net/bpf.h

   1 /*
   2  * Copyright (c) 2000-2008 Apple Inc. All rights reserved.
   3  *
   4  * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
   5  *
   6  * This file contains Original Code and/or Modifications of Original Code
   7  * as defined in and that are subject to the Apple Public Source License
   8  * Version 2.0 (the 'License'). You may not use this file except in
   9  * compliance with the License. The rights granted to you under the License
  10  * may not be used to create, or enable the creation or redistribution of,
  11  * unlawful or unlicensed copies of an Apple operating system, or to
  12  * circumvent, violate, or enable the circumvention or violation of, any
  13  * terms of an Apple operating system software license agreement.
  14  *
  15  * Please obtain a copy of the License at
  16  * http://www.opensource.apple.com/apsl/ and read it before using this file.
  17  *
  18  * The Original Code and all software distributed under the License are
  19  * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
  20  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  21  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
  22  * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
  23  * Please see the License for the specific language governing rights and
  24  * limitations under the License.
  25  *
  26  * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  27  */
  28 /*
  29  * Copyright (c) 1990, 1991, 1993
  30  *      The Regents of the University of California.  All rights reserved.
  31  *
  32  * This code is derived from the Stanford/CMU enet packet filter,
  33  * (net/enet.c) distributed as part of 4.3BSD, and code contributed
  34  * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
  35  * Berkeley Laboratory.
  36  *
  37  * Redistribution and use in source and binary forms, with or without
  38  * modification, are permitted provided that the following conditions
  39  * are met:
  40  * 1. Redistributions of source code must retain the above copyright
  41  *    notice, this list of conditions and the following disclaimer.
  42  * 2. Redistributions in binary form must reproduce the above copyright
  43  *    notice, this list of conditions and the following disclaimer in the
  44  *    documentation and/or other materials provided with the distribution.
  45  * 3. All advertising materials mentioning features or use of this software
  46  *    must display the following acknowledgement:
  47  *      This product includes software developed by the University of
  48  *      California, Berkeley and its contributors.
  49  * 4. Neither the name of the University nor the names of its contributors
  50  *    may be used to endorse or promote products derived from this software
  51  *    without specific prior written permission.
  52  *
  53  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  54  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  55  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  56  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  57  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  58  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  59  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  60  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  61  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  62  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  63  * SUCH DAMAGE.
  64  *
  65  *      @(#)bpf.h       8.1 (Berkeley) 6/10/93
  66  *      @(#)bpf.h       1.34 (LBL)     6/16/96
  67  *
  68  * $FreeBSD: src/sys/net/bpf.h,v 1.21.2.3 2001/08/01 00:23:13 fenner Exp $
  69  */
  70 /*
  71  * NOTICE: This file was modified by SPARTA, Inc. in 2006 to introduce
  72  * support for mandatory and extensible security protections.  This notice
  73  * is included in support of clause 2.2 (b) of the Apple Public License,
  74  * Version 2.0.
  75  */
  76
  77 #ifndef _NET_BPF_H_
  78 #define _NET_BPF_H_
  79 #include <sys/appleapiopts.h>
  80 #include <sys/types.h>
  81 #include <sys/time.h>
  82 #include <sys/cdefs.h>
  83
  84 #ifdef KERNEL
  85 #include <sys/kernel_types.h>
  86 #endif
  87
  88 /* BSD style release date */
  89 #define BPF_RELEASE 199606
  90
  91 typedef int32_t   bpf_int32;
  92 typedef u_int32_t bpf_u_int32;
  93
  94 /*
  95  * Alignment macros.  BPF_WORDALIGN rounds up to the next
  96  * even multiple of BPF_ALIGNMENT.
  97  */
  98 #define BPF_ALIGNMENT sizeof(int32_t)
  99 #define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
 100
 101 #define BPF_MAXINSNS 512
 102 #define BPF_MAXBUFSIZE 0x80000
 103 #define BPF_MINBUFSIZE 32
 104
 105 /*
 106  *  Structure for BIOCSETF.
 107  */
 108 struct bpf_program {
 109         u_int bf_len;
 110         struct bpf_insn *bf_insns;
 111 };
 112
 113 #ifdef KERNEL_PRIVATE
 114 /* LP64 version of bpf_program.  all pointers
 115  * grow when we're dealing with a 64-bit process.
 116  * WARNING - keep in sync with bpf_program
 117  */
 118 struct bpf_program64 {
 119         u_int           bf_len;
 120         user64_addr_t   bf_insns __attribute__((aligned(8)));
 121 };
 122
 123 struct bpf_program32 {
 124         u_int           bf_len;
 125         user32_addr_t   bf_insns;
 126 };
 127 #endif /* KERNEL_PRIVATE */
 128
 129 /*
 130  * Struct returned by BIOCGSTATS.
 131  */
 132 struct bpf_stat {
 133         u_int bs_recv;          /* number of packets received */
 134         u_int bs_drop;          /* number of packets dropped */
 135 };
 136
 137 /*
 138  * Struct return by BIOCVERSION.  This represents the version number of
 139  * the filter language described by the instruction encodings below.
 140  * bpf understands a program iff kernel_major == filter_major &&
 141  * kernel_minor >= filter_minor, that is, if the value returned by the
 142  * running kernel has the same major number and a minor number equal
 143  * equal to or less than the filter being downloaded.  Otherwise, the
 144  * results are undefined, meaning an error may be returned or packets
 145  * may be accepted haphazardly.
 146  * It has nothing to do with the source code version.
 147  */
 148 struct bpf_version {
 149         u_short bv_major;
 150         u_short bv_minor;
 151 };
 152 #if defined(__LP64__)
 153 #define __need_struct_timeval32
 154 #include <sys/_structs.h>
 155 #define BPF_TIMEVAL timeval32
 156 #else
 157 #define BPF_TIMEVAL timeval
 158 #endif /* __LP64__ */
 159 /* Current version number of filter architecture. */
 160 #define BPF_MAJOR_VERSION 1
 161 #define BPF_MINOR_VERSION 1
 162
 163 #define BIOCGBLEN       _IOR('B',102, u_int)
 164 #define BIOCSBLEN       _IOWR('B',102, u_int)
 165 #define BIOCSETF        _IOW('B',103, struct bpf_program)
 166 #ifdef KERNEL_PRIVATE
 167 #define BIOCSETF64      _IOW('B',103, struct bpf_program64)
 168 #define BIOCSETF32      _IOW('B',103, struct bpf_program32)
 169 #endif /* KERNEL_PRIVATE */
 170 #define BIOCFLUSH       _IO('B',104)
 171 #define BIOCPROMISC     _IO('B',105)
 172 #define BIOCGDLT        _IOR('B',106, u_int)
 173 #define BIOCGETIF       _IOR('B',107, struct ifreq)
 174 #define BIOCSETIF       _IOW('B',108, struct ifreq)
 175 #define BIOCSRTIMEOUT   _IOW('B',109, struct BPF_TIMEVAL)
 176 #define BIOCGRTIMEOUT   _IOR('B',110, struct BPF_TIMEVAL)
 177 #define BIOCGSTATS      _IOR('B',111, struct bpf_stat)
 178 #define BIOCIMMEDIATE   _IOW('B',112, u_int)
 179 #define BIOCVERSION     _IOR('B',113, struct bpf_version)
 180 #define BIOCGRSIG       _IOR('B',114, u_int)
 181 #define BIOCSRSIG       _IOW('B',115, u_int)
 182 #define BIOCGHDRCMPLT   _IOR('B',116, u_int)
 183 #define BIOCSHDRCMPLT   _IOW('B',117, u_int)
 184 #define BIOCGSEESENT    _IOR('B',118, u_int)
 185 #define BIOCSSEESENT    _IOW('B',119, u_int)
 186 #define BIOCSDLT        _IOW('B',120, u_int)
 187 #define BIOCGDLTLIST    _IOWR('B',121, struct bpf_dltlist)
 188
 189 /*
 190  * Structure prepended to each packet.
 191  */
 192 struct bpf_hdr {
 193         struct BPF_TIMEVAL bh_tstamp;   /* time stamp */
 194         bpf_u_int32     bh_caplen;      /* length of captured portion */
 195         bpf_u_int32     bh_datalen;     /* original length of packet */
 196         u_short         bh_hdrlen;      /* length of bpf header (this struct
 197                                            plus alignment padding) */
 198 };
 199 /*
 200  * Because the structure above is not a multiple of 4 bytes, some compilers
 201  * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work.
 202  * Only the kernel needs to know about it; applications use bh_hdrlen.
 203  */
 204 #ifdef KERNEL
 205 #define SIZEOF_BPF_HDR  (sizeof(struct bpf_hdr) <= 20 ? 18 : \
 206     sizeof(struct bpf_hdr))
 207 #endif
 208
 209 /*
 210  * Data-link level type codes.
 211  */
 212 #define DLT_NULL        0       /* no link-layer encapsulation */
 213 #define DLT_EN10MB      1       /* Ethernet (10Mb) */
 214 #define DLT_EN3MB       2       /* Experimental Ethernet (3Mb) */
 215 #define DLT_AX25        3       /* Amateur Radio AX.25 */
 216 #define DLT_PRONET      4       /* Proteon ProNET Token Ring */
 217 #define DLT_CHAOS       5       /* Chaos */
 218 #define DLT_IEEE802     6       /* IEEE 802 Networks */
 219 #define DLT_ARCNET      7       /* ARCNET */
 220 #define DLT_SLIP        8       /* Serial Line IP */
 221 #define DLT_PPP         9       /* Point-to-point Protocol */
 222 #define DLT_FDDI        10      /* FDDI */
 223 #define DLT_ATM_RFC1483 11      /* LLC/SNAP encapsulated atm */
 224 #define DLT_RAW         12      /* raw IP */
 225
 226 /*
 227  * These are values from BSD/OS's "bpf.h".
 228  * These are not the same as the values from the traditional libpcap
 229  * "bpf.h"; however, these values shouldn't be generated by any
 230  * OS other than BSD/OS, so the correct values to use here are the
 231  * BSD/OS values.
 232  *
 233  * Platforms that have already assigned these values to other
 234  * DLT_ codes, however, should give these codes the values
 235  * from that platform, so that programs that use these codes will
 236  * continue to compile - even though they won't correctly read
 237  * files of these types.
 238  */
 239 #define DLT_SLIP_BSDOS  15      /* BSD/OS Serial Line IP */
 240 #define DLT_PPP_BSDOS   16      /* BSD/OS Point-to-point Protocol */
 241
 242 #define DLT_PFSYNC      18      /* Packet filter state syncing */
 243 #define DLT_ATM_CLIP    19      /* Linux Classical-IP over ATM */
 244
 245 /*
 246  * This value is defined by NetBSD; other platforms should refrain from
 247  * using it for other purposes, so that NetBSD savefiles with a link
 248  * type of 50 can be read as this type on all platforms.
 249  */
 250 #define DLT_PPP_SERIAL  50      /* PPP over serial with HDLC encapsulation */
 251
 252 /*
 253  * This value was defined by libpcap 0.5; platforms that have defined
 254  * it with a different value should define it here with that value -
 255  * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
 256  * whatever value that happens to be, so programs will correctly
 257  * handle files with that link type regardless of the value of
 258  * DLT_C_HDLC.
 259  *
 260  * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
 261  * compatibility with programs written for BSD/OS.
 262  *
 263  * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
 264  * for source compatibility with programs written for libpcap 0.5.
 265  */
 266 #define DLT_C_HDLC      104     /* Cisco HDLC */
 267 #define DLT_CHDLC       DLT_C_HDLC
 268
 269 /*
 270  * Reserved for future use.
 271  * Do not pick other numerical value for these unless you have also
 272  * picked up the tcpdump.org top-of-CVS-tree version of "savefile.c",
 273  * which will arrange that capture files for these DLT_ types have
 274  * the same "network" value on all platforms, regardless of what
 275  * value is chosen for their DLT_ type (thus allowing captures made
 276  * on one platform to be read on other platforms, even if the two
 277  * platforms don't use the same numerical values for all DLT_ types).
 278  */
 279 #define DLT_IEEE802_11  105     /* IEEE 802.11 wireless */
 280
 281 /*
 282  * Values between 106 and 107 are used in capture file headers as
 283  * link-layer types corresponding to DLT_ types that might differ
 284  * between platforms; don't use those values for new DLT_ new types.
 285  */
 286
 287 /*
 288  * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
 289  * that the AF_ type in the link-layer header is in network byte order.
 290  *
 291  * OpenBSD defines it as 12, but that collides with DLT_RAW, so we
 292  * define it as 108 here.  If OpenBSD picks up this file, it should
 293  * define DLT_LOOP as 12 in its version, as per the comment above -
 294  * and should not use 108 for any purpose.
 295  */
 296 #define DLT_LOOP        108
 297
 298 /*
 299  * Values between 109 and 112 are used in capture file headers as
 300  * link-layer types corresponding to DLT_ types that might differ
 301  * between platforms; don't use those values for new DLT_ new types.
 302  */
 303
 304 /*
 305  * This is for Linux cooked sockets.
 306  */
 307 #define DLT_LINUX_SLL   113
 308
 309 /*
 310  * For use in capture-file headers as a link-layer type corresponding
 311  * to OpenBSD PF (Packet Filter) log.
 312  */
 313 #define DLT_PFLOG       117
 314
 315 /*
 316  * BSD header for 802.11 plus a number of bits of link-layer information
 317  * including radio information.
 318  */
 319 #ifndef DLT_IEEE802_11_RADIO
 320 #define DLT_IEEE802_11_RADIO    127
 321 #endif
 322
 323 /*
 324  * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
 325  * <dieter@apple.com>.  The header that's presented is an Ethernet-like
 326  * header:
 327  *
 328  *      #define FIREWIRE_EUI64_LEN      8
 329  *      struct firewire_header {
 330  *              u_char  firewire_dhost[FIREWIRE_EUI64_LEN];
 331  *              u_char  firewire_shost[FIREWIRE_EUI64_LEN];
 332  *              u_short firewire_type;
 333  *      };
 334  *
 335  * with "firewire_type" being an Ethernet type value, rather than,
 336  * for example, raw GASP frames being handed up.
 337  */
 338 #define DLT_APPLE_IP_OVER_IEEE1394      138
 339
 340 /*
 341  * For future use with 802.11 captures - defined by AbsoluteValue
 342  * Systems to store a number of bits of link-layer information
 343  * including radio information:
 344  *
 345  *      http://www.shaftnet.org/~pizza/software/capturefrm.txt
 346  *
 347  * but it might be used by some non-AVS drivers now or in the
 348  * future.
 349  */
 350 #define DLT_IEEE802_11_RADIO_AVS 163    /* 802.11 plus AVS radio header */
 351
 352
 353 /*
 354  * The instruction encodings.
 355  */
 356 /* instruction classes */
 357 #define BPF_CLASS(code) ((code) & 0x07)
 358 #define         BPF_LD          0x00
 359 #define         BPF_LDX         0x01
 360 #define         BPF_ST          0x02
 361 #define         BPF_STX         0x03
 362 #define         BPF_ALU         0x04
 363 #define         BPF_JMP         0x05
 364 #define         BPF_RET         0x06
 365 #define         BPF_MISC        0x07
 366
 367 /* ld/ldx fields */
 368 #define BPF_SIZE(code)  ((code) & 0x18)
 369 #define         BPF_W           0x00
 370 #define         BPF_H           0x08
 371 #define         BPF_B           0x10
 372 #define BPF_MODE(code)  ((code) & 0xe0)
 373 #define         BPF_IMM         0x00
 374 #define         BPF_ABS         0x20
 375 #define         BPF_IND         0x40
 376 #define         BPF_MEM         0x60
 377 #define         BPF_LEN         0x80
 378 #define         BPF_MSH         0xa0
 379
 380 /* alu/jmp fields */
 381 #define BPF_OP(code)    ((code) & 0xf0)
 382 #define         BPF_ADD         0x00
 383 #define         BPF_SUB         0x10
 384 #define         BPF_MUL         0x20
 385 #define         BPF_DIV         0x30
 386 #define         BPF_OR          0x40
 387 #define         BPF_AND         0x50
 388 #define         BPF_LSH         0x60
 389 #define         BPF_RSH         0x70
 390 #define         BPF_NEG         0x80
 391 #define         BPF_JA          0x00
 392 #define         BPF_JEQ         0x10
 393 #define         BPF_JGT         0x20
 394 #define         BPF_JGE         0x30
 395 #define         BPF_JSET        0x40
 396 #define BPF_SRC(code)   ((code) & 0x08)
 397 #define         BPF_K           0x00
 398 #define         BPF_X           0x08
 399
 400 /* ret - BPF_K and BPF_X also apply */
 401 #define BPF_RVAL(code)  ((code) & 0x18)
 402 #define         BPF_A           0x10
 403
 404 /* misc */
 405 #define BPF_MISCOP(code) ((code) & 0xf8)
 406 #define         BPF_TAX         0x00
 407 #define         BPF_TXA         0x80
 408
 409 /*
 410  * The instruction data structure.
 411  */
 412 struct bpf_insn {
 413         u_short         code;
 414         u_char          jt;
 415         u_char          jf;
 416         bpf_u_int32     k;
 417 };
 418
 419 /*
 420  * Macros for insn array initializers.
 421  */
 422 #define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
 423 #define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
 424
 425 #pragma pack(4)
 426
 427 /*
 428  * Structure to retrieve available DLTs for the interface.
 429  */
 430 struct bpf_dltlist {
 431         u_int32_t               bfl_len;        /* number of bfd_list array */
 432         union {
 433                 u_int32_t       *bflu_list;     /* array of DLTs */
 434                 u_int64_t       bflu_pad;
 435         } bfl_u;
 436 };
 437 #define bfl_list bfl_u.bflu_list
 438
 439 #pragma pack()
 440
 441 #ifdef KERNEL_PRIVATE
 442 /* Forward declerations */
 443 struct ifnet;
 444 struct mbuf;
 445
 446 extern int      bpf_validate(const struct bpf_insn *, int);
 447 extern void     bpfdetach(struct ifnet *);
 448 extern void     bpfilterattach(int);
 449 extern u_int    bpf_filter(const struct bpf_insn *, u_char *, u_int, u_int);
 450 #endif /* KERNEL_PRIVATE */
 451
 452 #ifdef KERNEL
 453 #ifndef BPF_TAP_MODE_T
 454 #define BPF_TAP_MODE_T
 455 /*!
 456         @enum BPF tap mode
 457         @abstract Constants defining interface families.
 458         @constant BPF_MODE_DISABLED Disable bpf.
 459         @constant BPF_MODE_INPUT Enable input only.
 460         @constant BPF_MODE_OUTPUT Enable output only.
 461         @constant BPF_MODE_INPUT_OUTPUT Enable input and output.
 462 */
 463
 464 enum {
 465         BPF_MODE_DISABLED       = 0,
 466         BPF_MODE_INPUT          = 1,
 467         BPF_MODE_OUTPUT         = 2,
 468         BPF_MODE_INPUT_OUTPUT   = 3
 469 };
 470 /*!
 471         @typedef bpf_tap_mode
 472         @abstract Mode for tapping. BPF_MODE_DISABLED/BPF_MODE_INPUT_OUTPUT etc.
 473 */
 474 typedef u_int32_t bpf_tap_mode;
 475 #endif /* !BPF_TAP_MODE_T */
 476
 477 /*!
 478         @typedef bpf_send_func
 479         @discussion bpf_send_func is called when a bpf file descriptor is
 480                 used to send a raw packet on the interface. The mbuf and data
 481                 link type are specified. The callback is responsible for
 482                 releasing the mbuf whether or not it returns an error.
 483         @param interface The interface the packet is being sent on.
 484         @param dlt The data link type the bpf device is attached to.
 485         @param packet The packet to be sent.
 486  */
 487 typedef errno_t (*bpf_send_func)(ifnet_t interface, u_int32_t data_link_type,
 488                                                                  mbuf_t packet);
 489
 490 /*!
 491         @typedef bpf_tap_func
 492         @discussion bpf_tap_func is called when the tap state of the
 493                 interface changes. This happens when a bpf device attaches to an
 494                 interface or detaches from an interface. The tap mode will join
 495                 together (bit or) the modes of all bpf devices using that
 496                 interface for that dlt. If you return an error from this
 497                 function, the bpf device attach attempt that triggered the tap
 498                 will fail. If this function was called bacuse the tap state was
 499                 decreasing (tap in or out is stopping), the error will be
 500                 ignored.
 501         @param interface The interface being tapped.
 502         @param dlt The data link type being tapped.
 503         @param direction The direction of the tap.
 504  */
 505 typedef errno_t (*bpf_tap_func)(ifnet_t interface, u_int32_t data_link_type,
 506                                                                 bpf_tap_mode direction);
 507
 508 /*!
 509         @function bpfattach
 510         @discussion Registers an interface with BPF. This allows bpf devices
 511                 to attach to your interface to capture packets. Your interface
 512                 will be unregistered automatically when your interface is
 513                 detached.
 514         @param interface The interface to register with BPF.
 515         @param data_link_type The data link type of the interface. See the
 516                 DLT_* defines in bpf.h.
 517         @param header_length The length, in bytes, of the data link header.
 518  */
 519 extern void  bpfattach(ifnet_t interface, u_int data_link_type,
 520     u_int header_length);
 521
 522 /*!
 523         @function bpf_attach
 524         @discussion Registers an interface with BPF. This allows bpf devices
 525                 to attach to your interface to capture and transmit packets.
 526                 Your interface will be unregistered automatically when your
 527                 interface is detached. You may register multiple times with
 528                 different data link types. An 802.11 interface would use this to
 529                 allow clients to pick whether they want just an ethernet style
 530                 frame or the 802.11 wireless headers as well. The first dlt you
 531                 register will be considered the default. Any bpf device attaches
 532                 that do not specify a data link type will use the default.
 533         @param interface The interface to register with BPF.
 534         @param data_link_type The data link type of the interface. See the
 535                 DLT_* defines in bpf.h.
 536         @param header_length The length, in bytes, of the data link header.
 537  */
 538 extern errno_t  bpf_attach(ifnet_t interface, u_int32_t data_link_type,
 539     u_int32_t header_length, bpf_send_func send, bpf_tap_func tap);
 540
 541 /*!
 542         @function bpf_tap_in
 543         @discussion Call this function when your interface receives a
 544                 packet. This function will check if any bpf devices need a
 545                 a copy of the packet.
 546         @param interface The interface the packet was received on.
 547         @param dlt The data link type of the packet.
 548         @param packet The packet received.
 549         @param header An optional pointer to a header that will be prepended.
 550         @param headerlen If the header was specified, the length of the header.
 551  */
 552 extern void bpf_tap_in(ifnet_t interface, u_int32_t dlt, mbuf_t packet,
 553     void *header, size_t header_len);
 554
 555 /*!
 556         @function bpf_tap_out
 557         @discussion Call this function when your interface trasmits a
 558                 packet. This function will check if any bpf devices need a
 559                 a copy of the packet.
 560         @param interface The interface the packet was or will be transmitted on.
 561         @param dlt The data link type of the packet.
 562         @param packet The packet received.
 563         @param header An optional pointer to a header that will be prepended.
 564         @param headerlen If the header was specified, the length of the header.
 565  */
 566 extern void bpf_tap_out(ifnet_t interface, u_int32_t dlt, mbuf_t packet,
 567     void *header, size_t header_len);
 568
 569 #endif /* KERNEL */
 570
 571 /*
 572  * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
 573  */
 574 #define BPF_MEMWORDS 16
 575
 576 #endif /* _NET_BPF_H_ */