osfmk/i386/postcode.h

   1 /*
   2  * Copyright (c) 2008 Apple Computer, Inc. All rights reserved.
   3  *
   4  * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
   5  *
   6  * This file contains Original Code and/or Modifications of Original Code
   7  * as defined in and that are subject to the Apple Public Source License
   8  * Version 2.0 (the 'License'). You may not use this file except in
   9  * compliance with the License. The rights granted to you under the License
  10  * may not be used to create, or enable the creation or redistribution of,
  11  * unlawful or unlicensed copies of an Apple operating system, or to
  12  * circumvent, violate, or enable the circumvention or violation of, any
  13  * terms of an Apple operating system software license agreement.
  14  *
  15  * Please obtain a copy of the License at
  16  * http://www.opensource.apple.com/apsl/ and read it before using this file.
  17  *
  18  * The Original Code and all software distributed under the License are
  19  * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
  20  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  21  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
  22  * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
  23  * Please see the License for the specific language governing rights and
  24  * limitations under the License.
  25  *
  26  * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  27  */
  28
  29 #ifndef _I386_POSTCODE_H_
  30 #define _I386_POSTCODE_H_
  31
  32 /*
  33  * Postcodes are no longer enabled by default in the DEBUG kernel
  34  * because platforms may not have builtin port 0x80 support.
  35  * To re-enable postcode outpout, uncomment the following define:
  36  */
  37 //#define DEBUG_POSTCODE 1
  38
  39 /* Define this to delay about 1 sec after posting each code */
  40 //#define POSTCODE_DELAY 1
  41
  42 /* The POSTCODE is port 0x80 */
  43 #define POSTPORT 0x80
  44
  45 #define SPINCOUNT       300000000
  46 #define CPU_PAUSE()     rep; nop
  47
  48 #if DEBUG_POSTCODE
  49 /*
  50  * Macro to output byte value to postcode, destoying register al.
  51  * Additionally, if POSTCODE_DELAY, spin for about a second.
  52  */
  53 #if POSTCODE_DELAY
  54 #define POSTCODE_AL                     \
  55         outb    %al,$(POSTPORT);        \
  56         movl    $(SPINCOUNT), %eax;     \
  57 1:                                      \
  58         CPU_PAUSE();                    \
  59         decl    %eax;                   \
  60         jne     1b
  61 #define POSTCODE_AX                     \
  62         outw    %ax,$(POSTPORT);        \
  63         movl    $(SPINCOUNT), %eax;     \
  64 1:                                      \
  65         CPU_PAUSE();                    \
  66         decl    %eax;                   \
  67         jne     1b
  68 #else
  69 #define POSTCODE_AL                     \
  70         outb    %al,$(POSTPORT)
  71 #define POSTCODE_AX                     \
  72         outw    %ax,$(POSTPORT)
  73 #endif /* POSTCODE_DELAY */
  74
  75 #define POSTCODE(XX)                    \
  76         mov     $(XX), %al;             \
  77         POSTCODE_AL
  78
  79 #define POSTCODE2(XXXX)                 \
  80         mov     $(XXXX), %ax;           \
  81         POSTCODE_AX
  82
  83 /* Output byte value to postcode, without destoying register eax */
  84 #define POSTCODE_SAVE_EAX(XX)           \
  85         push    %eax;                   \
  86         POSTCODE(XX);                   \
  87         pop     %eax
  88
  89 /*
  90  * Display a 32-bit value to the post card - low byte to high byte
  91  * Entry: value in %ebx
  92  * Exit: %ebx preserved; %eax destroyed
  93  */
  94 #define POSTCODE32_EBX                  \
  95         roll    $8, %ebx;               \
  96         movl    %ebx, %eax;             \
  97         POSTCODE_AL;                    \
  98                                         \
  99         roll    $8, %ebx;               \
 100         movl    %ebx, %eax;             \
 101         POSTCODE_AL;                    \
 102                                         \
 103         roll    $8, %ebx;               \
 104         movl    %ebx, %eax;             \
 105         POSTCODE_AL;                    \
 106                                         \
 107         roll    $8, %ebx;               \
 108         movl    %ebx, %eax;             \
 109         POSTCODE_AL
 110
 111 #else   /* DEBUG_POSTCODE */
 112 #define POSTCODE_AL
 113 #define POSTCODE_AX
 114 #define POSTCODE(X)
 115 #define POSTCODE2(X)
 116 #define POSTCODE_SAVE_EAX(X)
 117 #define POSTCODE32_EBX
 118 #endif  /* DEBUG_POSTCODE */
 119
 120 /*
 121  * The following postcodes are defined for stages of early startup:
 122  */
 123
 124 #define PSTART_ENTRY                    0xFF
 125 #define PSTART_REBASE                   0xFE
 126 #define PSTART_BEFORE_PAGING            0xFE
 127 #define PSTART_VSTART                   0xFD
 128 #define VSTART_ENTRY                    0xFC
 129 #define VSTART_IDLE_PTS_INIT            0xFB
 130 #define VSTART_PHYSMAP_INIT             0xFA
 131 #define VSTART_DESC_ALIAS_INIT          0xF9
 132 #define VSTART_SET_CR3                  0xF8
 133 #define VSTART_CPU_DESC_INIT            0xF7
 134 #define VSTART_CPU_MODE_INIT            0xF6
 135 #define VSTART_EXIT                     0xF5
 136 #define I386_INIT_ENTRY                 0xF4
 137 #define CPU_INIT_D                      0xF3
 138 #define PE_INIT_PLATFORM_D              0xF2
 139
 140 #define SLAVE_STARTPROG_ENTRY           0xEF
 141 #define SLAVE_PSTART                    0xEE
 142 #define I386_INIT_SLAVE                 0xED
 143
 144 #define PANIC_DOUBLE_FAULT              0xDF    /* Double Fault exception */
 145 #define PANIC_MACHINE_CHECK             0xDE    /* Machine-Check */
 146 #define MP_KDP_ENTER                    0xDB    /* Machine in kdp DeBugger */
 147 #define PANIC_HLT                       0xD1    /* Die an early death */
 148 #define NO_64BIT                        0x64    /* No 64-bit support yet */
 149
 150 #define ACPI_WAKE_START_ENTRY           0xCF
 151 #define ACPI_WAKE_PROT_ENTRY            0xCE
 152 #define ACPI_WAKE_PAGED_ENTRY           0xCD
 153
 154 #define CPU_IA32_ENABLE_ENTRY           0xBF
 155 #define CPU_IA32_ENABLE_EXIT            0xBE
 156 #define ML_LOAD_DESC64_ENTRY            0xBD
 157 #define ML_LOAD_DESC64_GDT              0xBC
 158 #define ML_LOAD_DESC64_IDT              0xBB
 159 #define ML_LOAD_DESC64_LDT              0xBA
 160 #define ML_LOAD_DESC64_EXIT             0xB9
 161 #define CPU_IA32_DISABLE_ENTRY          0xB8
 162 #define CPU_IA32_DISABLE_EXIT           0xB7
 163
 164 #ifndef ASSEMBLER
 165 inline static void
 166 _postcode_delay(uint32_t        spincount)
 167 {
 168         asm volatile("1:                        \n\t"
 169                      "  rep; nop;               \n\t"
 170                      "  decl %%eax;             \n\t"
 171                      "  jne 1b"
 172                      : : "a" (spincount));
 173 }
 174 inline static void
 175 _postcode(uint8_t       xx)
 176 {
 177         asm volatile("outb %0, %1" : : "a" (xx), "N" (POSTPORT));
 178 }
 179 inline static void
 180 _postcode2(uint16_t     xxxx)
 181 {
 182         asm volatile("outw %0, %1" : : "a" (xxxx), "N" (POSTPORT));
 183 }
 184 #if     DEBUG_POSTCODE
 185 inline static void
 186 postcode(uint8_t        xx)
 187 {
 188         _postcode(xx);
 189 #if     POSTCODE_DELAY
 190         _postcode_delay(SPINCOUNT);
 191 #endif
 192 }
 193 inline static void
 194 postcode2(uint8_t       xxxx)
 195 {
 196         _postcode2(xxxx);
 197 #if     POSTCODE_DELAY
 198         _postcode_delay(SPINCOUNT);
 199 #endif
 200 }
 201 #else
 202 #define postcode(xx) do {} while(0)
 203 #define postcode2(xxxx) do {} while(0)
 204 #endif
 205 #endif
 206
 207 #endif /* _I386_POSTCODE_H_ */