2 * Copyright (c) 2008-2016 Apple Inc. All rights reserved.
4 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
6 * This file contains Original Code and/or Modifications of Original Code
7 * as defined in and that are subject to the Apple Public Source License
8 * Version 2.0 (the 'License'). You may not use this file except in
9 * compliance with the License. The rights granted to you under the License
10 * may not be used to create, or enable the creation or redistribution of,
11 * unlawful or unlicensed copies of an Apple operating system, or to
12 * circumvent, violate, or enable the circumvention or violation of, any
13 * terms of an Apple operating system software license agreement.
15 * Please obtain a copy of the License at
16 * http://www.opensource.apple.com/apsl/ and read it before using this file.
18 * The Original Code and all software distributed under the License are
19 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
20 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
21 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
23 * Please see the License for the specific language governing rights and
24 * limitations under the License.
26 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
28 /* deflate.c -- compress data using the deflation algorithm
29 * Copyright (C) 1995-2005 Jean-loup Gailly.
30 * For conditions of distribution and use, see copyright notice in zlib.h
36 * The "deflation" process depends on being able to identify portions
37 * of the input text which are identical to earlier input (within a
38 * sliding window trailing behind the input currently being processed).
40 * The most straightforward technique turns out to be the fastest for
41 * most input files: try all possible matches and select the longest.
42 * The key feature of this algorithm is that insertions into the string
43 * dictionary are very simple and thus fast, and deletions are avoided
44 * completely. Insertions are performed at each input character, whereas
45 * string matches are performed only when the previous match ends. So it
46 * is preferable to spend more time in matches to allow very fast string
47 * insertions and avoid deletions. The matching algorithm for small
48 * strings is inspired from that of Rabin & Karp. A brute force approach
49 * is used to find longer strings when a small match has been found.
50 * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
51 * (by Leonid Broukhis).
52 * A previous version of this file used a more sophisticated algorithm
53 * (by Fiala and Greene) which is guaranteed to run in linear amortized
54 * time, but has a larger average cost, uses more memory and is patented.
55 * However the F&G algorithm may be faster for some highly redundant
56 * files if the parameter max_chain_length (described below) is too large.
60 * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
61 * I found it in 'freeze' written by Leonid Broukhis.
62 * Thanks to many people for bug reports and testing.
66 * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
67 * Available in http://www.ietf.org/rfc/rfc1951.txt
69 * A description of the Rabin and Karp algorithm is given in the book
70 * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
72 * Fiala,E.R., and Greene,D.H.
73 * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
81 const char deflate_copyright
[] =
82 " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly ";
84 If you use the zlib library in a product, an acknowledgment is welcome
85 in the documentation of your product. If for some reason you cannot
86 include such an acknowledgment, I would appreciate that you keep this
87 copyright string in the executable of your product.
90 /* ===========================================================================
91 * Function prototypes.
94 need_more
, /* block not completed, need more input or more output */
95 block_done
, /* block flush performed */
96 finish_started
, /* finish started, need only more output at next deflate */
97 finish_done
/* finish done, accept no more input or output */
100 typedef block_state (*compress_func
) OF((deflate_state
*s
, int flush
));
101 /* Compression function. Returns the block state after the call. */
103 local
void fill_window
OF((deflate_state
*s
));
104 local block_state deflate_stored
OF((deflate_state
*s
, int flush
));
105 local block_state deflate_fast
OF((deflate_state
*s
, int flush
));
107 local block_state deflate_slow
OF((deflate_state
*s
, int flush
));
109 local
void lm_init
OF((deflate_state
*s
));
110 local
void putShortMSB
OF((deflate_state
*s
, uInt b
));
111 local
void flush_pending
OF((z_streamp strm
));
112 local
int read_buf
OF((z_streamp strm
, Bytef
*buf
, unsigned size
));
115 void match_init
OF((void)); /* asm code initialization */
116 uInt longest_match
OF((deflate_state
*s
, IPos cur_match
));
118 local uInt longest_match
OF((deflate_state
*s
, IPos cur_match
));
121 local uInt longest_match_fast
OF((deflate_state
*s
, IPos cur_match
));
124 local
void check_match
OF((deflate_state
*s
, IPos start
, IPos match
,
128 /* ===========================================================================
133 /* Tail of hash chains */
136 # define TOO_FAR 4096
138 /* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
140 #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
141 /* Minimum amount of lookahead, except at the end of the input file.
142 * See deflate.c for comments about the MIN_MATCH+1.
145 /* Values for max_lazy_match, good_match and max_chain_length, depending on
146 * the desired pack level (0..9). The values given below have been tuned to
147 * exclude worst case performance for pathological files. Better values may be
148 * found for specific files.
150 typedef struct config_s
{
151 ush good_length
; /* reduce lazy search above this match length */
152 ush max_lazy
; /* do not perform lazy search above this match length */
153 ush nice_length
; /* quit search above this match length */
159 local
const config configuration_table
[2] = {
160 /* good lazy nice chain */
161 /* 0 */ {0, 0, 0, 0, deflate_stored
}, /* store only */
162 /* 1 */ {4, 4, 8, 4, deflate_fast
}}; /* max speed, no lazy matches */
164 local
const config configuration_table
[10] = {
165 /* good lazy nice chain */
166 /* 0 */ {0, 0, 0, 0, deflate_stored
}, /* store only */
167 /* 1 */ {4, 4, 8, 4, deflate_fast
}, /* max speed, no lazy matches */
168 /* 2 */ {4, 5, 16, 8, deflate_fast
},
169 /* 3 */ {4, 6, 32, 32, deflate_fast
},
171 /* 4 */ {4, 4, 16, 16, deflate_slow
}, /* lazy matches */
172 /* 5 */ {8, 16, 32, 32, deflate_slow
},
173 /* 6 */ {8, 16, 128, 128, deflate_slow
},
174 /* 7 */ {8, 32, 128, 256, deflate_slow
},
175 /* 8 */ {32, 128, 258, 1024, deflate_slow
},
176 /* 9 */ {32, 258, 258, 4096, deflate_slow
}}; /* max compression */
179 /* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
180 * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
185 /* result of memcmp for equal strings */
187 #ifndef NO_DUMMY_DECL
188 struct static_tree_desc_s
{int dummy
;}; /* for buggy compilers */
191 /* ===========================================================================
192 * Update a hash value with the given input byte
193 * IN assertion: all calls to to UPDATE_HASH are made with consecutive
194 * input characters, so that a running hash key can be computed from the
195 * previous key instead of complete recalculation each time.
197 #define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
200 /* ===========================================================================
201 * Insert string str in the dictionary and set match_head to the previous head
202 * of the hash chain (the most recent string with same hash key). Return
203 * the previous length of the hash chain.
204 * If this file is compiled with -DFASTEST, the compression level is forced
205 * to 1, and no hash chains are maintained.
206 * IN assertion: all calls to to INSERT_STRING are made with consecutive
207 * input characters and the first MIN_MATCH bytes of str are valid
208 * (except for the last MIN_MATCH-1 bytes of the input file).
211 #define INSERT_STRING(s, str, match_head) \
212 (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
213 match_head = s->head[s->ins_h], \
214 s->head[s->ins_h] = (Pos)(str))
216 #define INSERT_STRING(s, str, match_head) \
217 (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
218 match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
219 s->head[s->ins_h] = (Pos)(str))
222 /* ===========================================================================
223 * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
224 * prev[] will be initialized on the fly.
226 #define CLEAR_HASH(s) \
227 s->head[s->hash_size-1] = NIL; \
228 zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
230 /* ========================================================================= */
232 deflateInit_(z_streamp strm
, int level
, const char *version
, int stream_size
)
234 return deflateInit2_(strm
, level
, Z_DEFLATED
, MAX_WBITS
, DEF_MEM_LEVEL
,
235 Z_DEFAULT_STRATEGY
, version
, stream_size
);
236 /* To do: ignore strm->next_in if we use it as window */
239 /* ========================================================================= */
241 deflateInit2_(z_streamp strm
, int level
, int method
, int windowBits
,
242 int memLevel
, int strategy
, const char *version
,
247 static const char my_version
[] = ZLIB_VERSION
;
250 /* We overlay pending_buf and d_buf+l_buf. This works since the average
251 * output size for (length,distance) codes is <= 24 bits.
254 if (version
== Z_NULL
|| version
[0] != my_version
[0] ||
255 stream_size
!= sizeof(z_stream
)) {
256 return Z_VERSION_ERROR
;
258 if (strm
== Z_NULL
) return Z_STREAM_ERROR
;
262 if (strm
->zalloc
== (alloc_func
)0) {
263 strm
->zalloc
= zcalloc
;
264 strm
->opaque
= (voidpf
)0;
266 if (strm
->zfree
== (free_func
)0) strm
->zfree
= zcfree
;
267 #endif /* NO_ZCFUNCS */
270 if (level
!= 0) level
= 1;
272 if (level
== Z_DEFAULT_COMPRESSION
) level
= 6;
275 if (windowBits
< 0) { /* suppress zlib wrapper */
277 windowBits
= -windowBits
;
280 else if (windowBits
> 15) {
281 wrap
= 2; /* write gzip wrapper instead */
285 if (memLevel
< 1 || memLevel
> MAX_MEM_LEVEL
|| method
!= Z_DEFLATED
||
286 windowBits
< 8 || windowBits
> 15 || level
< 0 || level
> 9 ||
287 strategy
< 0 || strategy
> Z_FIXED
) {
288 return Z_STREAM_ERROR
;
290 if (windowBits
== 8) windowBits
= 9; /* until 256-byte window bug fixed */
291 s
= (deflate_state
*) ZALLOC(strm
, 1, sizeof(deflate_state
));
292 if (s
== Z_NULL
) return Z_MEM_ERROR
;
293 strm
->state
= (struct internal_state FAR
*)s
;
298 s
->w_bits
= windowBits
;
299 s
->w_size
= 1 << s
->w_bits
;
300 s
->w_mask
= s
->w_size
- 1;
302 s
->hash_bits
= memLevel
+ 7;
303 s
->hash_size
= 1 << s
->hash_bits
;
304 s
->hash_mask
= s
->hash_size
- 1;
305 s
->hash_shift
= ((s
->hash_bits
+MIN_MATCH
-1)/MIN_MATCH
);
307 s
->window
= (Bytef
*) ZALLOC(strm
, s
->w_size
, 2*sizeof(Byte
));
308 s
->prev
= (Posf
*) ZALLOC(strm
, s
->w_size
, sizeof(Pos
));
309 s
->head
= (Posf
*) ZALLOC(strm
, s
->hash_size
, sizeof(Pos
));
311 s
->lit_bufsize
= 1 << (memLevel
+ 6); /* 16K elements by default */
313 overlay
= (ushf
*) ZALLOC(strm
, s
->lit_bufsize
, sizeof(ush
)+2);
314 s
->pending_buf
= (uchf
*) overlay
;
315 s
->pending_buf_size
= (ulg
)s
->lit_bufsize
* (sizeof(ush
)+2L);
317 if (s
->window
== Z_NULL
|| s
->prev
== Z_NULL
|| s
->head
== Z_NULL
||
318 s
->pending_buf
== Z_NULL
) {
319 s
->status
= FINISH_STATE
;
320 strm
->msg
= (char*)ERR_MSG(Z_MEM_ERROR
);
324 s
->d_buf
= overlay
+ s
->lit_bufsize
/sizeof(ush
);
325 s
->l_buf
= s
->pending_buf
+ (1+sizeof(ush
))*s
->lit_bufsize
;
328 s
->strategy
= strategy
;
329 s
->method
= (Byte
)method
;
331 return deflateReset(strm
);
334 /* ========================================================================= */
336 deflateSetDictionary(z_streamp strm
, const Bytef
*dictionary
, uInt dictLength
)
339 uInt length
= dictLength
;
343 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
|| dictionary
== Z_NULL
||
344 strm
->state
->wrap
== 2 ||
345 (strm
->state
->wrap
== 1 && strm
->state
->status
!= INIT_STATE
))
346 return Z_STREAM_ERROR
;
350 strm
->adler
= adler32(strm
->adler
, dictionary
, dictLength
);
352 if (length
< MIN_MATCH
) return Z_OK
;
353 if (length
> MAX_DIST(s
)) {
354 length
= MAX_DIST(s
);
355 dictionary
+= dictLength
- length
; /* use the tail of the dictionary */
357 zmemcpy(s
->window
, dictionary
, length
);
358 s
->strstart
= length
;
359 s
->block_start
= (long)length
;
361 /* Insert all strings in the hash table (except for the last two bytes).
362 * s->lookahead stays null, so s->ins_h will be recomputed at the next
363 * call of fill_window.
365 s
->ins_h
= s
->window
[0];
366 UPDATE_HASH(s
, s
->ins_h
, s
->window
[1]);
367 for (n
= 0; n
<= length
- MIN_MATCH
; n
++) {
368 INSERT_STRING(s
, n
, hash_head
);
370 if (hash_head
) hash_head
= 0; /* to make compiler happy */
374 /* ========================================================================= */
377 deflateResetWithIO(z_streamp strm
, z_input_func zinput
, z_output_func zoutput
)
381 zerr
= deflateReset(strm
);
382 if (Z_OK
!= zerr
) return (zerr
);
383 strm
->state
->zinput
= zinput
;
384 strm
->state
->zoutput
= zoutput
;
388 /* ========================================================================= */
391 deflateReset(z_streamp strm
)
395 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
||
396 strm
->zalloc
== (alloc_func
)0 || strm
->zfree
== (free_func
)0) {
397 return Z_STREAM_ERROR
;
400 strm
->total_in
= strm
->total_out
= 0;
401 strm
->msg
= Z_NULL
; /* use zfree if we ever allocate msg dynamically */
402 strm
->data_type
= Z_UNKNOWN
;
404 s
= (deflate_state
*)strm
->state
;
406 s
->pending_out
= s
->pending_buf
;
407 s
->zinput
= &read_buf
;
411 s
->wrap
= -s
->wrap
; /* was made negative by deflate(..., Z_FINISH); */
413 s
->status
= s
->wrap
? INIT_STATE
: BUSY_STATE
;
416 s
->wrap
== 2 ? z_crc32(0L, Z_NULL
, 0) :
418 adler32(0L, Z_NULL
, 0);
419 s
->last_flush
= Z_NO_FLUSH
;
427 /* ========================================================================= */
429 deflateSetHeader(z_streamp strm
, gz_headerp head
)
431 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
) return Z_STREAM_ERROR
;
432 if (strm
->state
->wrap
!= 2) return Z_STREAM_ERROR
;
433 strm
->state
->gzhead
= head
;
437 /* ========================================================================= */
439 deflatePrime(z_streamp strm
, int bits
, int value
)
441 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
) return Z_STREAM_ERROR
;
442 strm
->state
->bi_valid
= bits
;
443 strm
->state
->bi_buf
= (ush
)(value
& ((1 << bits
) - 1));
447 /* ========================================================================= */
449 deflateParams(z_streamp strm
, int level
, int strategy
)
455 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
) return Z_STREAM_ERROR
;
459 if (level
!= 0) level
= 1;
461 if (level
== Z_DEFAULT_COMPRESSION
) level
= 6;
463 if (level
< 0 || level
> 9 || strategy
< 0 || strategy
> Z_FIXED
) {
464 return Z_STREAM_ERROR
;
466 func
= configuration_table
[s
->level
].func
;
468 if (func
!= configuration_table
[level
].func
&& strm
->total_in
!= 0) {
469 /* Flush the last buffer: */
470 err
= deflate(strm
, Z_PARTIAL_FLUSH
);
472 if (s
->level
!= level
) {
474 s
->max_lazy_match
= configuration_table
[level
].max_lazy
;
475 s
->good_match
= configuration_table
[level
].good_length
;
476 s
->nice_match
= configuration_table
[level
].nice_length
;
477 s
->max_chain_length
= configuration_table
[level
].max_chain
;
479 s
->strategy
= strategy
;
483 /* ========================================================================= */
485 deflateTune(z_streamp strm
, int good_length
, int max_lazy
, int nice_length
,
490 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
) return Z_STREAM_ERROR
;
492 s
->good_match
= good_length
;
493 s
->max_lazy_match
= max_lazy
;
494 s
->nice_match
= nice_length
;
495 s
->max_chain_length
= max_chain
;
499 /* =========================================================================
500 * For the default windowBits of 15 and memLevel of 8, this function returns
501 * a close to exact, as well as small, upper bound on the compressed size.
502 * They are coded as constants here for a reason--if the #define's are
503 * changed, then this function needs to be changed as well. The return
504 * value for 15 and 8 only works for those exact settings.
506 * For any setting other than those defaults for windowBits and memLevel,
507 * the value returned is a conservative worst case for the maximum expansion
508 * resulting from using fixed blocks instead of stored blocks, which deflate
509 * can emit on compressed data for some combinations of the parameters.
511 * This function could be more sophisticated to provide closer upper bounds
512 * for every combination of windowBits and memLevel, as well as wrap.
513 * But even the conservative upper bound of about 14% expansion does not
514 * seem onerous for output buffer allocation.
517 deflateBound(z_streamp strm
, uLong sourceLen
)
522 /* conservative upper bound */
523 destLen
= sourceLen
+
524 ((sourceLen
+ 7) >> 3) + ((sourceLen
+ 63) >> 6) + 11;
526 /* if can't get parameters, return conservative bound */
527 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
)
530 /* if not default parameters, return conservative bound */
532 if (s
->w_bits
!= 15 || s
->hash_bits
!= 8 + 7)
535 /* default settings: return tight bound for that case */
536 return compressBound(sourceLen
);
539 /* =========================================================================
540 * Put a short in the pending buffer. The 16-bit value is put in MSB order.
541 * IN assertion: the stream state is correct and there is enough room in
545 putShortMSB(deflate_state
*s
, uInt b
)
547 put_byte(s
, (Byte
)(b
>> 8));
548 put_byte(s
, (Byte
)(b
& 0xff));
551 /* =========================================================================
552 * Flush as much pending output as possible. All deflate() output goes
553 * through this function so some applications may wish to modify it
554 * to avoid allocating a large strm->next_out buffer and copying into it.
555 * (See also read_buf()).
558 flush_pending(z_streamp strm
)
560 unsigned len
= strm
->state
->pending
;
562 if (strm
->state
->zoutput
) {
563 len
= (*strm
->state
->zoutput
)(strm
, strm
->state
->pending_out
, len
);
565 if (len
> strm
->avail_out
) len
= strm
->avail_out
;
566 if (len
== 0) return;
567 zmemcpy(strm
->next_out
, strm
->state
->pending_out
, len
);
568 strm
->next_out
+= len
;
569 strm
->avail_out
-= len
;
572 strm
->state
->pending_out
+= len
;
573 strm
->total_out
+= len
;
574 strm
->state
->pending
-= len
;
575 if (strm
->state
->pending
== 0) {
576 strm
->state
->pending_out
= strm
->state
->pending_buf
;
580 /* ========================================================================= */
582 deflate(z_streamp strm
, int flush
)
584 int old_flush
; /* value of flush param for previous deflate call */
587 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
||
588 flush
> Z_FINISH
|| flush
< 0) {
589 return Z_STREAM_ERROR
;
593 if (strm
->next_out
== Z_NULL
||
594 (strm
->next_in
== Z_NULL
&& strm
->avail_in
!= 0) ||
595 (s
->status
== FINISH_STATE
&& flush
!= Z_FINISH
)) {
596 ERR_RETURN(strm
, Z_STREAM_ERROR
);
598 if (strm
->avail_out
== 0) ERR_RETURN(strm
, Z_BUF_ERROR
);
600 s
->strm
= strm
; /* just in case */
601 old_flush
= s
->last_flush
;
602 s
->last_flush
= flush
;
604 /* Write the header */
605 if (s
->status
== INIT_STATE
) {
608 strm
->adler
= z_crc32(0L, Z_NULL
, 0);
612 if (s
->gzhead
== NULL
) {
618 put_byte(s
, s
->level
== 9 ? 2 :
619 (s
->strategy
>= Z_HUFFMAN_ONLY
|| s
->level
< 2 ?
621 put_byte(s
, OS_CODE
);
622 s
->status
= BUSY_STATE
;
625 put_byte(s
, (s
->gzhead
->text
? 1 : 0) +
626 (s
->gzhead
->hcrc
? 2 : 0) +
627 (s
->gzhead
->extra
== Z_NULL
? 0 : 4) +
628 (s
->gzhead
->name
== Z_NULL
? 0 : 8) +
629 (s
->gzhead
->comment
== Z_NULL
? 0 : 16)
631 put_byte(s
, (Byte
)(s
->gzhead
->time
& 0xff));
632 put_byte(s
, (Byte
)((s
->gzhead
->time
>> 8) & 0xff));
633 put_byte(s
, (Byte
)((s
->gzhead
->time
>> 16) & 0xff));
634 put_byte(s
, (Byte
)((s
->gzhead
->time
>> 24) & 0xff));
635 put_byte(s
, s
->level
== 9 ? 2 :
636 (s
->strategy
>= Z_HUFFMAN_ONLY
|| s
->level
< 2 ?
638 put_byte(s
, s
->gzhead
->os
& 0xff);
639 if (s
->gzhead
->extra
!= NULL
) {
640 put_byte(s
, s
->gzhead
->extra_len
& 0xff);
641 put_byte(s
, (s
->gzhead
->extra_len
>> 8) & 0xff);
644 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
,
647 s
->status
= EXTRA_STATE
;
653 uInt header
= (Z_DEFLATED
+ ((s
->w_bits
-8)<<4)) << 8;
656 if (s
->strategy
>= Z_HUFFMAN_ONLY
|| s
->level
< 2)
658 else if (s
->level
< 6)
660 else if (s
->level
== 6)
664 header
|= (level_flags
<< 6);
665 if (s
->strstart
!= 0) header
|= PRESET_DICT
;
666 header
+= 31 - (header
% 31);
668 s
->status
= BUSY_STATE
;
669 putShortMSB(s
, header
);
671 /* Save the adler32 of the preset dictionary: */
672 if (s
->strstart
!= 0) {
673 putShortMSB(s
, (uInt
)(strm
->adler
>> 16));
674 putShortMSB(s
, (uInt
)(strm
->adler
& 0xffff));
676 strm
->adler
= adler32(0L, Z_NULL
, 0);
680 if (s
->status
== EXTRA_STATE
) {
681 if (s
->gzhead
->extra
!= NULL
) {
682 uInt beg
= s
->pending
; /* start of bytes to update crc */
684 while (s
->gzindex
< (s
->gzhead
->extra_len
& 0xffff)) {
685 if (s
->pending
== s
->pending_buf_size
) {
686 if (s
->gzhead
->hcrc
&& s
->pending
> beg
)
687 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
+ beg
,
691 if (s
->pending
== s
->pending_buf_size
)
694 put_byte(s
, s
->gzhead
->extra
[s
->gzindex
]);
697 if (s
->gzhead
->hcrc
&& s
->pending
> beg
)
698 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
+ beg
,
700 if (s
->gzindex
== s
->gzhead
->extra_len
) {
702 s
->status
= NAME_STATE
;
706 s
->status
= NAME_STATE
;
708 if (s
->status
== NAME_STATE
) {
709 if (s
->gzhead
->name
!= NULL
) {
710 uInt beg
= s
->pending
; /* start of bytes to update crc */
714 if (s
->pending
== s
->pending_buf_size
) {
715 if (s
->gzhead
->hcrc
&& s
->pending
> beg
)
716 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
+ beg
,
720 if (s
->pending
== s
->pending_buf_size
) {
725 val
= s
->gzhead
->name
[s
->gzindex
++];
728 if (s
->gzhead
->hcrc
&& s
->pending
> beg
)
729 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
+ beg
,
733 s
->status
= COMMENT_STATE
;
737 s
->status
= COMMENT_STATE
;
739 if (s
->status
== COMMENT_STATE
) {
740 if (s
->gzhead
->comment
!= NULL
) {
741 uInt beg
= s
->pending
; /* start of bytes to update crc */
745 if (s
->pending
== s
->pending_buf_size
) {
746 if (s
->gzhead
->hcrc
&& s
->pending
> beg
)
747 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
+ beg
,
751 if (s
->pending
== s
->pending_buf_size
) {
756 val
= s
->gzhead
->comment
[s
->gzindex
++];
759 if (s
->gzhead
->hcrc
&& s
->pending
> beg
)
760 strm
->adler
= z_crc32(strm
->adler
, s
->pending_buf
+ beg
,
763 s
->status
= HCRC_STATE
;
766 s
->status
= HCRC_STATE
;
768 if (s
->status
== HCRC_STATE
) {
769 if (s
->gzhead
->hcrc
) {
770 if (s
->pending
+ 2 > s
->pending_buf_size
)
772 if (s
->pending
+ 2 <= s
->pending_buf_size
) {
773 put_byte(s
, (Byte
)(strm
->adler
& 0xff));
774 put_byte(s
, (Byte
)((strm
->adler
>> 8) & 0xff));
775 strm
->adler
= z_crc32(0L, Z_NULL
, 0);
776 s
->status
= BUSY_STATE
;
780 s
->status
= BUSY_STATE
;
784 /* Flush as much pending output as possible */
785 if (s
->pending
!= 0) {
787 if (strm
->avail_out
== 0) {
788 /* Since avail_out is 0, deflate will be called again with
789 * more output space, but possibly with both pending and
790 * avail_in equal to zero. There won't be anything to do,
791 * but this is not an error situation so make sure we
792 * return OK instead of BUF_ERROR at next call of deflate:
798 /* Make sure there is something to do and avoid duplicate consecutive
799 * flushes. For repeated and useless calls with Z_FINISH, we keep
800 * returning Z_STREAM_END instead of Z_BUF_ERROR.
802 } else if (strm
->avail_in
== 0 && flush
<= old_flush
&&
804 ERR_RETURN(strm
, Z_BUF_ERROR
);
807 /* User must not provide more input after the first FINISH: */
808 if (s
->status
== FINISH_STATE
&& strm
->avail_in
!= 0) {
809 ERR_RETURN(strm
, Z_BUF_ERROR
);
812 /* Start a new block or continue the current one.
814 if (strm
->avail_in
!= 0 || s
->lookahead
!= 0 ||
815 (flush
!= Z_NO_FLUSH
&& s
->status
!= FINISH_STATE
)) {
818 bstate
= (*(configuration_table
[s
->level
].func
))(s
, flush
);
820 if (bstate
== finish_started
|| bstate
== finish_done
) {
821 s
->status
= FINISH_STATE
;
823 if (bstate
== need_more
|| bstate
== finish_started
) {
824 if (strm
->avail_out
== 0) {
825 s
->last_flush
= -1; /* avoid BUF_ERROR next call, see above */
828 /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
829 * of deflate should use the same flush parameter to make sure
830 * that the flush is complete. So we don't have to output an
831 * empty block here, this will be done at next call. This also
832 * ensures that for a very small output buffer, we emit at most
836 if (bstate
== block_done
) {
837 if (flush
== Z_PARTIAL_FLUSH
) {
839 } else { /* FULL_FLUSH or SYNC_FLUSH */
840 _tr_stored_block(s
, (char*)0, 0L, 0);
841 /* For a full flush, this empty block will be recognized
842 * as a special marker by inflate_sync().
844 if (flush
== Z_FULL_FLUSH
) {
845 CLEAR_HASH(s
); /* forget history */
849 if (strm
->avail_out
== 0) {
850 s
->last_flush
= -1; /* avoid BUF_ERROR at next call, see above */
855 Assert(strm
->avail_out
> 0, "bug2");
857 if (flush
!= Z_FINISH
) return Z_OK
;
858 if (s
->wrap
<= 0) return Z_STREAM_END
;
860 /* Write the trailer */
863 put_byte(s
, (Byte
)(strm
->adler
& 0xff));
864 put_byte(s
, (Byte
)((strm
->adler
>> 8) & 0xff));
865 put_byte(s
, (Byte
)((strm
->adler
>> 16) & 0xff));
866 put_byte(s
, (Byte
)((strm
->adler
>> 24) & 0xff));
867 put_byte(s
, (Byte
)(strm
->total_in
& 0xff));
868 put_byte(s
, (Byte
)((strm
->total_in
>> 8) & 0xff));
869 put_byte(s
, (Byte
)((strm
->total_in
>> 16) & 0xff));
870 put_byte(s
, (Byte
)((strm
->total_in
>> 24) & 0xff));
875 putShortMSB(s
, (uInt
)(strm
->adler
>> 16));
876 putShortMSB(s
, (uInt
)(strm
->adler
& 0xffff));
879 /* If avail_out is zero, the application will call deflate again
882 if (s
->wrap
> 0) s
->wrap
= -s
->wrap
; /* write the trailer only once! */
883 return s
->pending
!= 0 ? Z_OK
: Z_STREAM_END
;
886 /* ========================================================================= */
888 deflateEnd(z_streamp strm
)
892 if (strm
== Z_NULL
|| strm
->state
== Z_NULL
) return Z_STREAM_ERROR
;
894 status
= strm
->state
->status
;
895 if (status
!= INIT_STATE
&&
896 status
!= EXTRA_STATE
&&
897 status
!= NAME_STATE
&&
898 status
!= COMMENT_STATE
&&
899 status
!= HCRC_STATE
&&
900 status
!= BUSY_STATE
&&
901 status
!= FINISH_STATE
) {
902 return Z_STREAM_ERROR
;
905 /* Deallocate in reverse order of allocations: */
906 TRY_FREE(strm
, strm
->state
->pending_buf
);
907 TRY_FREE(strm
, strm
->state
->head
);
908 TRY_FREE(strm
, strm
->state
->prev
);
909 TRY_FREE(strm
, strm
->state
->window
);
911 ZFREE(strm
, strm
->state
);
912 strm
->state
= Z_NULL
;
914 return status
== BUSY_STATE
? Z_DATA_ERROR
: Z_OK
;
917 /* =========================================================================
918 * Copy the source state to the destination state.
919 * To simplify the source, this is not supported for 16-bit MSDOS (which
920 * doesn't have enough memory anyway to duplicate compression states).
923 deflateCopy(z_streamp dest
, z_streamp source
)
926 return Z_STREAM_ERROR
;
933 if (source
== Z_NULL
|| dest
== Z_NULL
|| source
->state
== Z_NULL
) {
934 return Z_STREAM_ERROR
;
939 zmemcpy(dest
, source
, sizeof(z_stream
));
941 ds
= (deflate_state
*) ZALLOC(dest
, 1, sizeof(deflate_state
));
942 if (ds
== Z_NULL
) return Z_MEM_ERROR
;
943 dest
->state
= (struct internal_state FAR
*) ds
;
944 zmemcpy(ds
, ss
, sizeof(deflate_state
));
947 ds
->window
= (Bytef
*) ZALLOC(dest
, ds
->w_size
, 2*sizeof(Byte
));
948 ds
->prev
= (Posf
*) ZALLOC(dest
, ds
->w_size
, sizeof(Pos
));
949 ds
->head
= (Posf
*) ZALLOC(dest
, ds
->hash_size
, sizeof(Pos
));
950 overlay
= (ushf
*) ZALLOC(dest
, ds
->lit_bufsize
, sizeof(ush
)+2);
951 ds
->pending_buf
= (uchf
*) overlay
;
953 if (ds
->window
== Z_NULL
|| ds
->prev
== Z_NULL
|| ds
->head
== Z_NULL
||
954 ds
->pending_buf
== Z_NULL
) {
958 /* following zmemcpy do not work for 16-bit MSDOS */
959 zmemcpy(ds
->window
, ss
->window
, ds
->w_size
* 2 * sizeof(Byte
));
960 zmemcpy(ds
->prev
, ss
->prev
, ds
->w_size
* sizeof(Pos
));
961 zmemcpy(ds
->head
, ss
->head
, ds
->hash_size
* sizeof(Pos
));
962 zmemcpy(ds
->pending_buf
, ss
->pending_buf
, (uInt
)ds
->pending_buf_size
);
964 ds
->pending_out
= ds
->pending_buf
+ (ss
->pending_out
- ss
->pending_buf
);
965 ds
->d_buf
= overlay
+ ds
->lit_bufsize
/sizeof(ush
);
966 ds
->l_buf
= ds
->pending_buf
+ (1+sizeof(ush
))*ds
->lit_bufsize
;
968 ds
->l_desc
.dyn_tree
= ds
->dyn_ltree
;
969 ds
->d_desc
.dyn_tree
= ds
->dyn_dtree
;
970 ds
->bl_desc
.dyn_tree
= ds
->bl_tree
;
973 #endif /* MAXSEG_64K */
976 /* ===========================================================================
977 * Read a new buffer from the current input stream, update the adler32
978 * and total number of bytes read. All deflate() input goes through
979 * this function so some applications may wish to modify it to avoid
980 * allocating a large strm->next_in buffer and copying from it.
981 * (See also flush_pending()).
984 read_buf(z_streamp strm
, Bytef
*buf
, unsigned size
)
986 unsigned len
= strm
->avail_in
;
988 if (len
> size
) len
= size
;
989 if (len
== 0) return 0;
991 strm
->avail_in
-= len
;
993 if (strm
->state
->wrap
== 1) {
994 strm
->adler
= adler32(strm
->adler
, strm
->next_in
, len
);
997 else if (strm
->state
->wrap
== 2) {
998 strm
->adler
= z_crc32(strm
->adler
, strm
->next_in
, len
);
1001 zmemcpy(buf
, strm
->next_in
, len
);
1002 strm
->next_in
+= len
;
1003 strm
->total_in
+= len
;
1008 /* ===========================================================================
1009 * Initialize the "longest match" routines for a new zlib stream
1012 lm_init(deflate_state
*s
)
1014 s
->window_size
= (ulg
)2L*s
->w_size
;
1018 /* Set the default configuration parameters:
1020 s
->max_lazy_match
= configuration_table
[s
->level
].max_lazy
;
1021 s
->good_match
= configuration_table
[s
->level
].good_length
;
1022 s
->nice_match
= configuration_table
[s
->level
].nice_length
;
1023 s
->max_chain_length
= configuration_table
[s
->level
].max_chain
;
1026 s
->block_start
= 0L;
1028 s
->match_length
= s
->prev_length
= MIN_MATCH
-1;
1029 s
->match_available
= 0;
1033 match_init(); /* initialize the asm code */
1039 /* ===========================================================================
1040 * Set match_start to the longest match starting at the given string and
1041 * return its length. Matches shorter or equal to prev_length are discarded,
1042 * in which case the result is equal to prev_length and match_start is
1044 * IN assertions: cur_match is the head of the hash chain for the current
1045 * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
1046 * OUT assertion: the match length is not greater than s->lookahead.
1049 /* For 80x86 and 680x0, an optimized version will be provided in match.asm or
1050 * match.S. The code will be functionally equivalent.
1051 * @param cur_match current match
1054 longest_match(deflate_state
*s
, IPos cur_match
)
1056 unsigned chain_length
= s
->max_chain_length
;/* max hash chain length */
1057 Bytef
*scan
= s
->window
+ s
->strstart
; /* current string */
1058 Bytef
*match
; /* matched string */
1059 int len
; /* length of current match */
1060 int best_len
= s
->prev_length
; /* best match length so far */
1061 int nice_match
= s
->nice_match
; /* stop if match long enough */
1062 IPos limit
= s
->strstart
> (IPos
)MAX_DIST(s
) ?
1063 s
->strstart
- (IPos
)MAX_DIST(s
) : NIL
;
1064 /* Stop when cur_match becomes <= limit. To simplify the code,
1065 * we prevent matches with the string of window index 0.
1067 Posf
*prev
= s
->prev
;
1068 uInt wmask
= s
->w_mask
;
1071 /* Compare two bytes at a time. Note: this is not always beneficial.
1072 * Try with and without -DUNALIGNED_OK to check.
1074 Bytef
*strend
= s
->window
+ s
->strstart
+ MAX_MATCH
- 1;
1075 ush scan_start
= *(ushf
*)scan
;
1076 ush scan_end
= *(ushf
*)(scan
+best_len
-1);
1078 Bytef
*strend
= s
->window
+ s
->strstart
+ MAX_MATCH
;
1079 Byte scan_end1
= scan
[best_len
-1];
1080 Byte scan_end
= scan
[best_len
];
1083 /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
1084 * It is easy to get rid of this optimization if necessary.
1086 Assert(s
->hash_bits
>= 8 && MAX_MATCH
== 258, "Code too clever");
1088 /* Do not waste too much time if we already have a good match: */
1089 if (s
->prev_length
>= s
->good_match
) {
1092 /* Do not look for matches beyond the end of the input. This is necessary
1093 * to make deflate deterministic.
1095 if ((uInt
)nice_match
> s
->lookahead
) nice_match
= s
->lookahead
;
1097 Assert((ulg
)s
->strstart
<= s
->window_size
-MIN_LOOKAHEAD
, "need lookahead");
1100 Assert(cur_match
< s
->strstart
, "no future");
1101 match
= s
->window
+ cur_match
;
1103 /* Skip to next match if the match length cannot increase
1104 * or if the match length is less than 2. Note that the checks below
1105 * for insufficient lookahead only occur occasionally for performance
1106 * reasons. Therefore uninitialized memory will be accessed, and
1107 * conditional jumps will be made that depend on those values.
1108 * However the length of the match is limited to the lookahead, so
1109 * the output of deflate is not affected by the uninitialized values.
1111 #if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
1112 /* This code assumes sizeof(unsigned short) == 2. Do not use
1113 * UNALIGNED_OK if your compiler uses a different size.
1115 if (*(ushf
*)(match
+best_len
-1) != scan_end
||
1116 *(ushf
*)match
!= scan_start
) continue;
1118 /* It is not necessary to compare scan[2] and match[2] since they are
1119 * always equal when the other bytes match, given that the hash keys
1120 * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
1121 * strstart+3, +5, ... up to strstart+257. We check for insufficient
1122 * lookahead only every 4th comparison; the 128th check will be made
1123 * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
1124 * necessary to put more guard bytes at the end of the window, or
1125 * to check more often for insufficient lookahead.
1127 Assert(scan
[2] == match
[2], "scan[2]?");
1130 } while (*(ushf
*)(scan
+=2) == *(ushf
*)(match
+=2) &&
1131 *(ushf
*)(scan
+=2) == *(ushf
*)(match
+=2) &&
1132 *(ushf
*)(scan
+=2) == *(ushf
*)(match
+=2) &&
1133 *(ushf
*)(scan
+=2) == *(ushf
*)(match
+=2) &&
1135 /* The funny "do {}" generates better code on most compilers */
1137 /* Here, scan <= window+strstart+257 */
1138 Assert(scan
<= s
->window
+(unsigned)(s
->window_size
-1), "wild scan");
1139 if (*scan
== *match
) scan
++;
1141 len
= (MAX_MATCH
- 1) - (int)(strend
-scan
);
1142 scan
= strend
- (MAX_MATCH
-1);
1144 #else /* UNALIGNED_OK */
1146 if (match
[best_len
] != scan_end
||
1147 match
[best_len
-1] != scan_end1
||
1149 *++match
!= scan
[1]) continue;
1151 /* The check at best_len-1 can be removed because it will be made
1152 * again later. (This heuristic is not always a win.)
1153 * It is not necessary to compare scan[2] and match[2] since they
1154 * are always equal when the other bytes match, given that
1155 * the hash keys are equal and that HASH_BITS >= 8.
1159 Assert(*scan
== *match
, "match[2]?");
1161 /* We check for insufficient lookahead only every 8th comparison;
1162 * the 256th check will be made at strstart+258.
1165 } while (*++scan
== *++match
&& *++scan
== *++match
&&
1166 *++scan
== *++match
&& *++scan
== *++match
&&
1167 *++scan
== *++match
&& *++scan
== *++match
&&
1168 *++scan
== *++match
&& *++scan
== *++match
&&
1171 Assert(scan
<= s
->window
+(unsigned)(s
->window_size
-1), "wild scan");
1173 len
= MAX_MATCH
- (int)(strend
- scan
);
1174 scan
= strend
- MAX_MATCH
;
1176 #endif /* UNALIGNED_OK */
1178 if (len
> best_len
) {
1179 s
->match_start
= cur_match
;
1181 if (len
>= nice_match
) break;
1183 scan_end
= *(ushf
*)(scan
+best_len
-1);
1185 scan_end1
= scan
[best_len
-1];
1186 scan_end
= scan
[best_len
];
1189 } while ((cur_match
= prev
[cur_match
& wmask
]) > limit
1190 && --chain_length
!= 0);
1192 if ((uInt
)best_len
<= s
->lookahead
) return (uInt
)best_len
;
1193 return s
->lookahead
;
1196 #endif /* FASTEST */
1198 /* ---------------------------------------------------------------------------
1199 * Optimized version for level == 1 or strategy == Z_RLE only
1200 * @param cur_match current match
1203 longest_match_fast(deflate_state
*s
, IPos cur_match
)
1205 Bytef
*scan
= s
->window
+ s
->strstart
; /* current string */
1206 Bytef
*match
; /* matched string */
1207 int len
; /* length of current match */
1208 Bytef
*strend
= s
->window
+ s
->strstart
+ MAX_MATCH
;
1210 /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
1211 * It is easy to get rid of this optimization if necessary.
1213 Assert(s
->hash_bits
>= 8 && MAX_MATCH
== 258, "Code too clever");
1215 Assert((ulg
)s
->strstart
<= s
->window_size
-MIN_LOOKAHEAD
, "need lookahead");
1217 Assert(cur_match
< s
->strstart
, "no future");
1219 match
= s
->window
+ cur_match
;
1221 /* Return failure if the match length is less than 2:
1223 if (match
[0] != scan
[0] || match
[1] != scan
[1]) return MIN_MATCH
-1;
1225 /* The check at best_len-1 can be removed because it will be made
1226 * again later. (This heuristic is not always a win.)
1227 * It is not necessary to compare scan[2] and match[2] since they
1228 * are always equal when the other bytes match, given that
1229 * the hash keys are equal and that HASH_BITS >= 8.
1233 Assert(*scan
== *match
, "match[2]?");
1235 /* We check for insufficient lookahead only every 8th comparison;
1236 * the 256th check will be made at strstart+258.
1239 } while (*++scan
== *++match
&& *++scan
== *++match
&&
1240 *++scan
== *++match
&& *++scan
== *++match
&&
1241 *++scan
== *++match
&& *++scan
== *++match
&&
1242 *++scan
== *++match
&& *++scan
== *++match
&&
1245 Assert(scan
<= s
->window
+(unsigned)(s
->window_size
-1), "wild scan");
1247 len
= MAX_MATCH
- (int)(strend
- scan
);
1249 if (len
< MIN_MATCH
) return MIN_MATCH
- 1;
1251 s
->match_start
= cur_match
;
1252 return (uInt
)len
<= s
->lookahead
? (uInt
)len
: s
->lookahead
;
1256 /* ===========================================================================
1257 * Check that the match at match_start is indeed a match.
1260 check_match(deflate_state
*s
, IPos start
, IPos match
, int length
)
1262 /* check that the match is indeed a match */
1263 if (zmemcmp(s
->window
+ match
,
1264 s
->window
+ start
, length
) != EQUAL
) {
1265 fprintf(stderr
, " start %u, match %u, length %d\n",
1266 start
, match
, length
);
1268 fprintf(stderr
, "%c%c", s
->window
[match
++], s
->window
[start
++]);
1269 } while (--length
!= 0);
1270 z_error("invalid match");
1272 if (z_verbose
> 1) {
1273 fprintf(stderr
,"\\[%d,%d]", start
-match
, length
);
1274 do { putc(s
->window
[start
++], stderr
); } while (--length
!= 0);
1278 # define check_match(s, start, match, length)
1281 /* ===========================================================================
1282 * Fill the window when the lookahead becomes insufficient.
1283 * Updates strstart and lookahead.
1285 * IN assertion: lookahead < MIN_LOOKAHEAD
1286 * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
1287 * At least one byte has been read, or avail_in == 0; reads are
1288 * performed for at least two bytes (required for the zip translate_eol
1289 * option -- not supported here).
1292 fill_window(deflate_state
*s
)
1296 unsigned more
; /* Amount of free space at the end of the window. */
1297 uInt wsize
= s
->w_size
;
1300 more
= (unsigned)(s
->window_size
-(ulg
)s
->lookahead
-(ulg
)s
->strstart
);
1302 /* Deal with !@#$% 64K limit: */
1303 if (sizeof(int) <= 2) {
1304 if (more
== 0 && s
->strstart
== 0 && s
->lookahead
== 0) {
1307 } else if (more
== (unsigned)(-1)) {
1308 /* Very unlikely, but possible on 16 bit machine if
1309 * strstart == 0 && lookahead == 1 (input done a byte at time)
1315 /* If the window is almost full and there is insufficient lookahead,
1316 * move the upper half to the lower one to make room in the upper half.
1318 if (s
->strstart
>= wsize
+MAX_DIST(s
)) {
1320 zmemcpy(s
->window
, s
->window
+wsize
, (unsigned)wsize
);
1321 s
->match_start
-= wsize
;
1322 s
->strstart
-= wsize
; /* we now have strstart >= MAX_DIST */
1323 s
->block_start
-= (long) wsize
;
1325 /* Slide the hash table (could be avoided with 32 bit values
1326 at the expense of memory usage). We slide even when level == 0
1327 to keep the hash table consistent if we switch back to level > 0
1328 later. (Using level 0 permanently is not an optimal usage of
1329 zlib, so we don't care about this pathological case.)
1331 /* %%% avoid this when Z_RLE */
1336 *p
= (Pos
)(m
>= wsize
? m
-wsize
: NIL
);
1344 *p
= (Pos
)(m
>= wsize
? m
-wsize
: NIL
);
1345 /* If n is not on any hash chain, prev[n] is garbage but
1346 * its value will never be used.
1352 if (s
->strm
->avail_in
== 0) return;
1354 /* If there was no sliding:
1355 * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
1356 * more == window_size - lookahead - strstart
1357 * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
1358 * => more >= window_size - 2*WSIZE + 2
1359 * In the BIG_MEM or MMAP case (not yet supported),
1360 * window_size == input_size + MIN_LOOKAHEAD &&
1361 * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
1362 * Otherwise, window_size == 2*WSIZE so more >= 2.
1363 * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
1365 Assert(more
>= 2, "more < 2");
1367 n
= (*s
->zinput
)(s
->strm
, s
->window
+ s
->strstart
+ s
->lookahead
, more
);
1370 /* Initialize the hash value now that we have some input: */
1371 if (s
->lookahead
>= MIN_MATCH
) {
1372 s
->ins_h
= s
->window
[s
->strstart
];
1373 UPDATE_HASH(s
, s
->ins_h
, s
->window
[s
->strstart
+1]);
1375 Call
UPDATE_HASH() MIN_MATCH
-3 more times
1378 /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
1379 * but this is not important since only literal bytes will be emitted.
1382 } while (s
->lookahead
< MIN_LOOKAHEAD
&& s
->strm
->avail_in
!= 0);
1385 /* ===========================================================================
1386 * Flush the current block, with given end-of-file flag.
1387 * IN assertion: strstart is set to the end of the current match.
1389 #define FLUSH_BLOCK_ONLY(s, eof) { \
1390 _tr_flush_block(s, (s->block_start >= 0L ? \
1391 (charf *)&s->window[(unsigned)s->block_start] : \
1393 (ulg)((long)s->strstart - s->block_start), \
1395 s->block_start = s->strstart; \
1396 flush_pending(s->strm); \
1397 Tracev((stderr,"[FLUSH]")); \
1400 /* Same but force premature exit if necessary. */
1401 #define FLUSH_BLOCK(s, eof) { \
1402 FLUSH_BLOCK_ONLY(s, eof); \
1403 if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
1406 /* ===========================================================================
1407 * Copy without compression as much as possible from the input stream, return
1408 * the current block state.
1409 * This function does not insert new strings in the dictionary since
1410 * uncompressible data is probably not useful. This function is used
1411 * only for the level=0 compression option.
1412 * NOTE: this function should be optimized to avoid extra copying from
1413 * window to pending_buf.
1416 deflate_stored(deflate_state
*s
, int flush
)
1418 /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
1419 * to pending_buf_size, and each stored block has a 5 byte header:
1421 ulg max_block_size
= 0xffff;
1424 if (max_block_size
> s
->pending_buf_size
- 5) {
1425 max_block_size
= s
->pending_buf_size
- 5;
1428 /* Copy as much as possible from input to output: */
1430 /* Fill the window as much as possible: */
1431 if (s
->lookahead
<= 1) {
1433 Assert(s
->strstart
< s
->w_size
+MAX_DIST(s
) ||
1434 s
->block_start
>= (long)s
->w_size
, "slide too late");
1437 if (s
->lookahead
== 0 && flush
== Z_NO_FLUSH
) return need_more
;
1439 if (s
->lookahead
== 0) break; /* flush the current block */
1441 Assert(s
->block_start
>= 0L, "block gone");
1443 s
->strstart
+= s
->lookahead
;
1446 /* Emit a stored block if pending_buf will be full: */
1447 max_start
= s
->block_start
+ max_block_size
;
1448 if (s
->strstart
== 0 || (ulg
)s
->strstart
>= max_start
) {
1449 /* strstart == 0 is possible when wraparound on 16-bit machine */
1450 s
->lookahead
= (uInt
)(s
->strstart
- max_start
);
1451 s
->strstart
= (uInt
)max_start
;
1454 /* Flush if we may have to slide, otherwise block_start may become
1455 * negative and the data will be gone:
1457 if (s
->strstart
- (uInt
)s
->block_start
>= MAX_DIST(s
)) {
1461 FLUSH_BLOCK(s
, flush
== Z_FINISH
);
1462 return flush
== Z_FINISH
? finish_done
: block_done
;
1465 /* ===========================================================================
1466 * Compress as much as possible from the input stream, return the current
1468 * This function does not perform lazy evaluation of matches and inserts
1469 * new strings in the dictionary only for unmatched strings or for short
1470 * matches. It is used only for the fast compression options.
1473 deflate_fast(deflate_state
*s
, int flush
)
1475 IPos hash_head
= NIL
; /* head of the hash chain */
1476 int bflush
; /* set if current block must be flushed */
1479 /* Make sure that we always have enough lookahead, except
1480 * at the end of the input file. We need MAX_MATCH bytes
1481 * for the next match, plus MIN_MATCH bytes to insert the
1482 * string following the next match.
1484 if (s
->lookahead
< MIN_LOOKAHEAD
) {
1486 if (s
->lookahead
< MIN_LOOKAHEAD
&& flush
== Z_NO_FLUSH
) {
1489 if (s
->lookahead
== 0) break; /* flush the current block */
1492 /* Insert the string window[strstart .. strstart+2] in the
1493 * dictionary, and set hash_head to the head of the hash chain:
1495 if (s
->lookahead
>= MIN_MATCH
) {
1496 INSERT_STRING(s
, s
->strstart
, hash_head
);
1499 /* Find the longest match, discarding those <= prev_length.
1500 * At this point we have always match_length < MIN_MATCH
1502 if (hash_head
!= NIL
&& s
->strstart
- hash_head
<= MAX_DIST(s
)) {
1503 /* To simplify the code, we prevent matches with the string
1504 * of window index 0 (in particular we have to avoid a match
1505 * of the string with itself at the start of the input file).
1508 if ((s
->strategy
!= Z_HUFFMAN_ONLY
&& s
->strategy
!= Z_RLE
) ||
1509 (s
->strategy
== Z_RLE
&& s
->strstart
- hash_head
== 1)) {
1510 s
->match_length
= longest_match_fast (s
, hash_head
);
1513 if (s
->strategy
!= Z_HUFFMAN_ONLY
&& s
->strategy
!= Z_RLE
) {
1514 s
->match_length
= longest_match (s
, hash_head
);
1515 } else if (s
->strategy
== Z_RLE
&& s
->strstart
- hash_head
== 1) {
1516 s
->match_length
= longest_match_fast (s
, hash_head
);
1519 /* longest_match() or longest_match_fast() sets match_start */
1521 if (s
->match_length
>= MIN_MATCH
) {
1522 check_match(s
, s
->strstart
, s
->match_start
, s
->match_length
);
1524 _tr_tally_dist(s
, s
->strstart
- s
->match_start
,
1525 s
->match_length
- MIN_MATCH
, bflush
);
1527 s
->lookahead
-= s
->match_length
;
1529 /* Insert new strings in the hash table only if the match length
1530 * is not too large. This saves time but degrades compression.
1533 if (s
->match_length
<= s
->max_insert_length
&&
1534 s
->lookahead
>= MIN_MATCH
) {
1535 s
->match_length
--; /* string at strstart already in table */
1538 INSERT_STRING(s
, s
->strstart
, hash_head
);
1539 /* strstart never exceeds WSIZE-MAX_MATCH, so there are
1540 * always MIN_MATCH bytes ahead.
1542 } while (--s
->match_length
!= 0);
1547 s
->strstart
+= s
->match_length
;
1548 s
->match_length
= 0;
1549 s
->ins_h
= s
->window
[s
->strstart
];
1550 UPDATE_HASH(s
, s
->ins_h
, s
->window
[s
->strstart
+1]);
1552 Call
UPDATE_HASH() MIN_MATCH
-3 more times
1554 /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
1555 * matter since it will be recomputed at next deflate call.
1559 /* No match, output a literal byte */
1560 Tracevv((stderr
,"%c", s
->window
[s
->strstart
]));
1561 _tr_tally_lit (s
, s
->window
[s
->strstart
], bflush
);
1565 if (bflush
) FLUSH_BLOCK(s
, 0);
1567 FLUSH_BLOCK(s
, flush
== Z_FINISH
);
1568 return flush
== Z_FINISH
? finish_done
: block_done
;
1572 /* ===========================================================================
1573 * Same as above, but achieves better compression. We use a lazy
1574 * evaluation for matches: a match is finally adopted only if there is
1575 * no better match at the next window position.
1578 deflate_slow(deflate_state
*s
, int flush
)
1580 IPos hash_head
= NIL
; /* head of hash chain */
1581 int bflush
; /* set if current block must be flushed */
1583 /* Process the input block. */
1585 /* Make sure that we always have enough lookahead, except
1586 * at the end of the input file. We need MAX_MATCH bytes
1587 * for the next match, plus MIN_MATCH bytes to insert the
1588 * string following the next match.
1590 if (s
->lookahead
< MIN_LOOKAHEAD
) {
1592 if (s
->lookahead
< MIN_LOOKAHEAD
&& flush
== Z_NO_FLUSH
) {
1595 if (s
->lookahead
== 0) break; /* flush the current block */
1598 /* Insert the string window[strstart .. strstart+2] in the
1599 * dictionary, and set hash_head to the head of the hash chain:
1601 if (s
->lookahead
>= MIN_MATCH
) {
1602 INSERT_STRING(s
, s
->strstart
, hash_head
);
1605 /* Find the longest match, discarding those <= prev_length.
1607 s
->prev_length
= s
->match_length
;
1608 s
->prev_match
= s
->match_start
;
1609 s
->match_length
= MIN_MATCH
-1;
1611 if (hash_head
!= NIL
&& s
->prev_length
< s
->max_lazy_match
&&
1612 s
->strstart
- hash_head
<= MAX_DIST(s
)) {
1613 /* To simplify the code, we prevent matches with the string
1614 * of window index 0 (in particular we have to avoid a match
1615 * of the string with itself at the start of the input file).
1617 if (s
->strategy
!= Z_HUFFMAN_ONLY
&& s
->strategy
!= Z_RLE
) {
1618 s
->match_length
= longest_match (s
, hash_head
);
1619 } else if (s
->strategy
== Z_RLE
&& s
->strstart
- hash_head
== 1) {
1620 s
->match_length
= longest_match_fast (s
, hash_head
);
1622 /* longest_match() or longest_match_fast() sets match_start */
1624 if (s
->match_length
<= 5 && (s
->strategy
== Z_FILTERED
1625 #if TOO_FAR <= 32767
1626 || (s
->match_length
== MIN_MATCH
&&
1627 s
->strstart
- s
->match_start
> TOO_FAR
)
1631 /* If prev_match is also MIN_MATCH, match_start is garbage
1632 * but we will ignore the current match anyway.
1634 s
->match_length
= MIN_MATCH
-1;
1637 /* If there was a match at the previous step and the current
1638 * match is not better, output the previous match:
1640 if (s
->prev_length
>= MIN_MATCH
&& s
->match_length
<= s
->prev_length
) {
1641 uInt max_insert
= s
->strstart
+ s
->lookahead
- MIN_MATCH
;
1642 /* Do not insert strings in hash table beyond this. */
1644 check_match(s
, s
->strstart
-1, s
->prev_match
, s
->prev_length
);
1646 _tr_tally_dist(s
, s
->strstart
-1 - s
->prev_match
,
1647 s
->prev_length
- MIN_MATCH
, bflush
);
1649 /* Insert in hash table all strings up to the end of the match.
1650 * strstart-1 and strstart are already inserted. If there is not
1651 * enough lookahead, the last two strings are not inserted in
1654 s
->lookahead
-= s
->prev_length
-1;
1655 s
->prev_length
-= 2;
1657 if (++s
->strstart
<= max_insert
) {
1658 INSERT_STRING(s
, s
->strstart
, hash_head
);
1660 } while (--s
->prev_length
!= 0);
1661 s
->match_available
= 0;
1662 s
->match_length
= MIN_MATCH
-1;
1665 if (bflush
) FLUSH_BLOCK(s
, 0);
1667 } else if (s
->match_available
) {
1668 /* If there was no match at the previous position, output a
1669 * single literal. If there was a match but the current match
1670 * is longer, truncate the previous match to a single literal.
1672 Tracevv((stderr
,"%c", s
->window
[s
->strstart
-1]));
1673 _tr_tally_lit(s
, s
->window
[s
->strstart
-1], bflush
);
1675 FLUSH_BLOCK_ONLY(s
, 0);
1679 if (s
->strm
->avail_out
== 0) return need_more
;
1681 /* There is no previous match to compare with, wait for
1682 * the next step to decide.
1684 s
->match_available
= 1;
1689 Assert (flush
!= Z_NO_FLUSH
, "no flush?");
1690 if (s
->match_available
) {
1691 Tracevv((stderr
,"%c", s
->window
[s
->strstart
-1]));
1692 _tr_tally_lit(s
, s
->window
[s
->strstart
-1], bflush
);
1693 s
->match_available
= 0;
1695 FLUSH_BLOCK(s
, flush
== Z_FINISH
);
1696 return flush
== Z_FINISH
? finish_done
: block_done
;
1698 #endif /* FASTEST */
1701 /* ===========================================================================
1702 * For Z_RLE, simply look for runs of bytes, generate matches only of distance
1703 * one. Do not maintain a hash table. (It will be regenerated if this run of
1704 * deflate switches away from Z_RLE.)
1707 deflate_rle(deflate_state
*s
, int flush
)
1709 int bflush
; /* set if current block must be flushed */
1710 uInt run
; /* length of run */
1711 uInt max
; /* maximum length of run */
1712 uInt prev
; /* byte at distance one to match */
1713 Bytef
*scan
; /* scan for end of run */
1716 /* Make sure that we always have enough lookahead, except
1717 * at the end of the input file. We need MAX_MATCH bytes
1718 * for the longest encodable run.
1720 if (s
->lookahead
< MAX_MATCH
) {
1722 if (s
->lookahead
< MAX_MATCH
&& flush
== Z_NO_FLUSH
) {
1725 if (s
->lookahead
== 0) break; /* flush the current block */
1728 /* See how many times the previous byte repeats */
1730 if (s
->strstart
> 0) { /* if there is a previous byte, that is */
1731 max
= s
->lookahead
< MAX_MATCH
? s
->lookahead
: MAX_MATCH
;
1732 scan
= s
->window
+ s
->strstart
- 1;
1735 if (*scan
++ != prev
)
1737 } while (++run
< max
);
1740 /* Emit match if have run of MIN_MATCH or longer, else emit literal */
1741 if (run
>= MIN_MATCH
) {
1742 check_match(s
, s
->strstart
, s
->strstart
- 1, run
);
1743 _tr_tally_dist(s
, 1, run
- MIN_MATCH
, bflush
);
1744 s
->lookahead
-= run
;
1747 /* No match, output a literal byte */
1748 Tracevv((stderr
,"%c", s
->window
[s
->strstart
]));
1749 _tr_tally_lit (s
, s
->window
[s
->strstart
], bflush
);
1753 if (bflush
) FLUSH_BLOCK(s
, 0);
1755 FLUSH_BLOCK(s
, flush
== Z_FINISH
);
1756 return flush
== Z_FINISH
? finish_done
: block_done
;
1760 #if XNU_KERNEL_PRIVATE
1763 zlib_deflate_memory_size(int wbits
, int memlevel
)
1765 return (31 + sizeof(deflate_state
) + (1 << (wbits
+ 2)) + (1 << (memlevel
+ 9)));
1768 #endif /* XNU_KERNEL_PRIVATE */