bsd/sys/protosw.h

   1 /*
   2  * Copyright (c) 2000-2006 Apple Computer, Inc. All rights reserved.
   3  *
   4  * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
   5  *
   6  * This file contains Original Code and/or Modifications of Original Code
   7  * as defined in and that are subject to the Apple Public Source License
   8  * Version 2.0 (the 'License'). You may not use this file except in
   9  * compliance with the License. The rights granted to you under the License
  10  * may not be used to create, or enable the creation or redistribution of,
  11  * unlawful or unlicensed copies of an Apple operating system, or to
  12  * circumvent, violate, or enable the circumvention or violation of, any
  13  * terms of an Apple operating system software license agreement.
  14  *
  15  * Please obtain a copy of the License at
  16  * http://www.opensource.apple.com/apsl/ and read it before using this file.
  17  *
  18  * The Original Code and all software distributed under the License are
  19  * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
  20  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  21  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
  22  * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
  23  * Please see the License for the specific language governing rights and
  24  * limitations under the License.
  25  *
  26  * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  27  */
  28 /* Copyright (c) 1998, 1999 Apple Computer, Inc. All Rights Reserved */
  29 /* Copyright (c) 1995 NeXT Computer, Inc. All Rights Reserved */
  30 /*
  31  * Copyright (c) 1982, 1986, 1993
  32  *      The Regents of the University of California.  All rights reserved.
  33  *
  34  * Redistribution and use in source and binary forms, with or without
  35  * modification, are permitted provided that the following conditions
  36  * are met:
  37  * 1. Redistributions of source code must retain the above copyright
  38  *    notice, this list of conditions and the following disclaimer.
  39  * 2. Redistributions in binary form must reproduce the above copyright
  40  *    notice, this list of conditions and the following disclaimer in the
  41  *    documentation and/or other materials provided with the distribution.
  42  * 3. All advertising materials mentioning features or use of this software
  43  *    must display the following acknowledgement:
  44  *      This product includes software developed by the University of
  45  *      California, Berkeley and its contributors.
  46  * 4. Neither the name of the University nor the names of its contributors
  47  *    may be used to endorse or promote products derived from this software
  48  *    without specific prior written permission.
  49  *
  50  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  51  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  52  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  53  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  54  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  55  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  56  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  57  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  58  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  59  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  60  * SUCH DAMAGE.
  61  *
  62  *      @(#)protosw.h   8.1 (Berkeley) 6/2/93
  63  * $FreeBSD: src/sys/sys/protosw.h,v 1.28.2.2 2001/07/03 11:02:01 ume Exp $
  64  */
  65
  66 #ifndef _SYS_PROTOSW_H_
  67 #define _SYS_PROTOSW_H_
  68
  69 #include <sys/appleapiopts.h>
  70 #include <sys/cdefs.h>
  71
  72 #define PR_SLOWHZ       2               /* 2 slow timeouts per second */
  73 #define PR_FASTHZ       5               /* 5 fast timeouts per second */
  74
  75 #ifdef PRIVATE
  76
  77 /* Forward declare these structures referenced from prototypes below. */
  78 struct mbuf;
  79 struct proc;
  80 struct sockaddr;
  81 struct socket;
  82 struct sockopt;
  83 struct socket_filter;
  84
  85 /*#ifdef _KERNEL*/
  86 /*
  87  * Protocol switch table.
  88  *
  89  * Each protocol has a handle initializing one of these structures,
  90  * which is used for protocol-protocol and system-protocol communication.
  91  *
  92  * A protocol is called through the pr_init entry before any other.
  93  * Thereafter it is called every 200ms through the pr_fasttimo entry and
  94  * every 500ms through the pr_slowtimo for timer based actions.
  95  * The system will call the pr_drain entry if it is low on space and
  96  * this should throw away any non-critical data.
  97  *
  98  * Protocols pass data between themselves as chains of mbufs using
  99  * the pr_input and pr_output hooks.  Pr_input passes data up (towards
 100  * the users) and pr_output passes it down (towards the interfaces); control
 101  * information passes up and down on pr_ctlinput and pr_ctloutput.
 102  * The protocol is responsible for the space occupied by any the
 103  * arguments to these entries and must dispose it.
 104  *
 105  * The userreq routine interfaces protocols to the system and is
 106  * described below.
 107  */
 108
 109 #include <sys/socketvar.h>
 110 #include <sys/queue.h>
 111 #ifdef KERNEL
 112 #include <kern/locks.h>
 113 #endif /* KERNEL */
 114
 115 #pragma pack(4)
 116
 117 struct protosw {
 118         short   pr_type;                /* socket type used for */
 119         struct  domain *pr_domain;      /* domain protocol a member of */
 120         short   pr_protocol;            /* protocol number */
 121         unsigned int pr_flags;          /* see below */
 122 /* protocol-protocol hooks */
 123         void    (*pr_input)(struct mbuf *, int len);
 124                                         /* input to protocol (from below) */
 125         int     (*pr_output)(struct mbuf *m, struct socket *so);
 126                                         /* output to protocol (from above) */
 127         void    (*pr_ctlinput)(int, struct sockaddr *, void *);
 128                                         /* control input (from below) */
 129         int     (*pr_ctloutput)(struct socket *, struct sockopt *);
 130                                         /* control output (from above) */
 131 /* user-protocol hook */
 132         void    *pr_ousrreq;
 133 /* utility hooks */
 134         void    (*pr_init)(void);       /* initialization hook */
 135         void    (*pr_fasttimo)(void);
 136                                         /* fast timeout (200ms) */
 137         void    (*pr_slowtimo)(void);
 138                                         /* slow timeout (500ms) */
 139         void    (*pr_drain)(void);
 140                                         /* flush any excess space possible */
 141 #if __APPLE__
 142         int     (*pr_sysctl)(int *, u_int, void *, size_t *, void *, size_t);
 143                                         /* sysctl for protocol */
 144 #endif
 145         struct  pr_usrreqs *pr_usrreqs; /* supersedes pr_usrreq() */
 146 #if __APPLE__
 147         int     (*pr_lock)      (struct socket *so, int locktype, int debug); /* lock function for protocol */
 148         int     (*pr_unlock)    (struct socket *so, int locktype, int debug); /* unlock for protocol */
 149 #ifdef _KERN_LOCKS_H_
 150         lck_mtx_t *     (*pr_getlock)   (struct socket *so, int locktype);
 151 #else
 152         void *  (*pr_getlock)   (struct socket *so, int locktype);
 153 #endif
 154 #endif
 155 #if __APPLE__
 156 /* Implant hooks */
 157         TAILQ_HEAD(, socket_filter) pr_filter_head;
 158         struct protosw *pr_next;        /* Chain for domain */
 159         u_long  reserved[1];            /* Padding for future use */
 160 #endif
 161 };
 162
 163 #pragma pack()
 164
 165 /*
 166  * Values for pr_flags.
 167  * PR_ADDR requires PR_ATOMIC;
 168  * PR_ADDR and PR_CONNREQUIRED are mutually exclusive.
 169  * PR_IMPLOPCL means that the protocol allows sendto without prior connect,
 170  *      and the protocol understands the MSG_EOF flag.  The first property is
 171  *      is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed
 172  *      anyhow).
 173  */
 174 #define PR_ATOMIC                       0x01            /* exchange atomic messages only */
 175 #define PR_ADDR                 0x02            /* addresses given with messages */
 176 #define PR_CONNREQUIRED 0x04            /* connection required by protocol */
 177 #define PR_WANTRCVD             0x08            /* want PRU_RCVD calls */
 178 #define PR_RIGHTS                       0x10            /* passes capabilities */
 179 #define PR_IMPLOPCL             0x20            /* implied open/close */
 180 #define PR_LASTHDR              0x40            /* enforce ipsec policy; last header */
 181 #define PR_PROTOLOCK            0x80            /* protocol takes care of it's own locking */
 182 #define PR_PCBLOCK              0x100   /* protocol supports per pcb finer grain locking */
 183 #define PR_DISPOSE              0x200   /* protocol requires late lists disposal */
 184
 185 /*
 186  * The arguments to usrreq are:
 187  *      (*protosw[].pr_usrreq)(up, req, m, nam, opt);
 188  * where up is a (struct socket *), req is one of these requests,
 189  * m is a optional mbuf chain containing a message,
 190  * nam is an optional mbuf chain containing an address,
 191  * and opt is a pointer to a socketopt structure or nil.
 192  * The protocol is responsible for disposal of the mbuf chain m,
 193  * the caller is responsible for any space held by nam and opt.
 194  * A non-zero return from usrreq gives an
 195  * UNIX error number which should be passed to higher level software.
 196  */
 197 #define PRU_ATTACH              0       /* attach protocol to up */
 198 #define PRU_DETACH              1       /* detach protocol from up */
 199 #define PRU_BIND                2       /* bind socket to address */
 200 #define PRU_LISTEN              3       /* listen for connection */
 201 #define PRU_CONNECT             4       /* establish connection to peer */
 202 #define PRU_ACCEPT              5       /* accept connection from peer */
 203 #define PRU_DISCONNECT          6       /* disconnect from peer */
 204 #define PRU_SHUTDOWN            7       /* won't send any more data */
 205 #define PRU_RCVD                8       /* have taken data; more room now */
 206 #define PRU_SEND                9       /* send this data */
 207 #define PRU_ABORT               10      /* abort (fast DISCONNECT, DETATCH) */
 208 #define PRU_CONTROL             11      /* control operations on protocol */
 209 #define PRU_SENSE               12      /* return status into m */
 210 #define PRU_RCVOOB              13      /* retrieve out of band data */
 211 #define PRU_SENDOOB             14      /* send out of band data */
 212 #define PRU_SOCKADDR            15      /* fetch socket's address */
 213 #define PRU_PEERADDR            16      /* fetch peer's address */
 214 #define PRU_CONNECT2            17      /* connect two sockets */
 215 /* begin for protocols internal use */
 216 #define PRU_FASTTIMO            18      /* 200ms timeout */
 217 #define PRU_SLOWTIMO            19      /* 500ms timeout */
 218 #define PRU_PROTORCV            20      /* receive from below */
 219 #define PRU_PROTOSEND           21      /* send to below */
 220 /* end for protocol's internal use */
 221 #define PRU_SEND_EOF            22      /* send and close */
 222 #define PRU_NREQ                22
 223
 224 #ifdef PRUREQUESTS
 225 char *prurequests[] = {
 226         "ATTACH",       "DETACH",       "BIND",         "LISTEN",
 227         "CONNECT",      "ACCEPT",       "DISCONNECT",   "SHUTDOWN",
 228         "RCVD",         "SEND",         "ABORT",        "CONTROL",
 229         "SENSE",        "RCVOOB",       "SENDOOB",      "SOCKADDR",
 230         "PEERADDR",     "CONNECT2",     "FASTTIMO",     "SLOWTIMO",
 231         "PROTORCV",     "PROTOSEND",
 232         "SEND_EOF",
 233 };
 234 #endif
 235
 236 #ifdef  KERNEL                  /* users shouldn't see this decl */
 237
 238 struct ifnet;
 239 struct stat;
 240 struct ucred;
 241 struct uio;
 242
 243 /*
 244  * If the ordering here looks odd, that's because it's alphabetical.
 245  * Having this structure separated out from the main protoswitch is allegedly
 246  * a big (12 cycles per call) lose on high-end CPUs.  We will eventually
 247  * migrate this stuff back into the main structure.
 248  */
 249 struct pr_usrreqs {
 250         int     (*pru_abort)(struct socket *so);
 251         int     (*pru_accept)(struct socket *so, struct sockaddr **nam);
 252         int     (*pru_attach)(struct socket *so, int proto, struct proc *p);
 253         int     (*pru_bind)(struct socket *so, struct sockaddr *nam,
 254                                  struct proc *p);
 255         int     (*pru_connect)(struct socket *so, struct sockaddr *nam,
 256                                     struct proc *p);
 257         int     (*pru_connect2)(struct socket *so1, struct socket *so2);
 258         int     (*pru_control)(struct socket *so, u_long cmd, caddr_t data,
 259                                     struct ifnet *ifp, struct proc *p);
 260         int     (*pru_detach)(struct socket *so);
 261         int     (*pru_disconnect)(struct socket *so);
 262         int     (*pru_listen)(struct socket *so, struct proc *p);
 263         int     (*pru_peeraddr)(struct socket *so, struct sockaddr **nam);
 264         int     (*pru_rcvd)(struct socket *so, int flags);
 265         int     (*pru_rcvoob)(struct socket *so, struct mbuf *m, int flags);
 266         int     (*pru_send)(struct socket *so, int flags, struct mbuf *m,
 267                                  struct sockaddr *addr, struct mbuf *control,
 268                                  struct proc *p);
 269 #define PRUS_OOB        0x1
 270 #define PRUS_EOF        0x2
 271 #define PRUS_MORETOCOME 0x4
 272         int     (*pru_sense)(struct socket *so, void  *sb, int isstat64);
 273         int     (*pru_shutdown)(struct socket *so);
 274         int     (*pru_sockaddr)(struct socket *so, struct sockaddr **nam);
 275
 276         /*
 277          * These three added later, so they are out of order.  They are used
 278          * for shortcutting (fast path input/output) in some protocols.
 279          * XXX - that's a lie, they are not implemented yet
 280          * Rather than calling sosend() etc. directly, calls are made
 281          * through these entry points.  For protocols which still use
 282          * the generic code, these just point to those routines.
 283          */
 284         int     (*pru_sosend)(struct socket *so, struct sockaddr *addr,
 285                                    struct uio *uio, struct mbuf *top,
 286                                    struct mbuf *control, int flags);
 287         int     (*pru_soreceive)(struct socket *so,
 288                                       struct sockaddr **paddr,
 289                                       struct uio *uio, struct mbuf **mp0,
 290                                       struct mbuf **controlp, int *flagsp);
 291         int     (*pru_sopoll)(struct socket *so, int events,
 292                                    struct ucred *cred, void *);
 293 };
 294
 295 __BEGIN_DECLS
 296
 297 extern int      pru_abort_notsupp(struct socket *so);
 298 extern int      pru_accept_notsupp(struct socket *so, struct sockaddr **nam);
 299 extern int      pru_attach_notsupp(struct socket *so, int proto,
 300                                    struct proc *p);
 301 extern int      pru_bind_notsupp(struct socket *so, struct sockaddr *nam,
 302                                  struct proc *p);
 303 extern int      pru_connect_notsupp(struct socket *so, struct sockaddr *nam,
 304                                     struct proc *p);
 305 extern int      pru_connect2_notsupp(struct socket *so1, struct socket *so2);
 306 extern int      pru_control_notsupp(struct socket *so, u_long cmd, caddr_t data,
 307                                     struct ifnet *ifp, struct proc *p);
 308 extern int      pru_detach_notsupp(struct socket *so);
 309 extern int      pru_disconnect_notsupp(struct socket *so);
 310 extern int      pru_listen_notsupp(struct socket *so, struct proc *p);
 311 extern int      pru_peeraddr_notsupp(struct socket *so,
 312                                      struct sockaddr **nam);
 313 extern int      pru_rcvd_notsupp(struct socket *so, int flags);
 314 extern int      pru_rcvoob_notsupp(struct socket *so, struct mbuf *m,
 315                                    int flags);
 316 extern int      pru_send_notsupp(struct socket *so, int flags, struct mbuf *m,
 317                                  struct sockaddr *addr, struct mbuf *control,
 318                                  struct proc *p);
 319 extern int      pru_sense_null(struct socket *so, void * sb, int isstat64);
 320 extern int      pru_shutdown_notsupp(struct socket *so);
 321 extern int      pru_sockaddr_notsupp(struct socket *so,
 322                                      struct sockaddr **nam);
 323 extern int      pru_sosend_notsupp(struct socket *so, struct sockaddr *addr,
 324                                    struct uio *uio, struct mbuf *top,
 325                                    struct mbuf *control, int flags);
 326 extern int      pru_soreceive_notsupp(struct socket *so,
 327                                       struct sockaddr **paddr,
 328                                       struct uio *uio, struct mbuf **mp0,
 329                                       struct mbuf **controlp, int *flagsp);
 330 extern int      pru_sopoll_notsupp(struct socket *so, int events,
 331                                    struct ucred *cred, void *);
 332
 333 __END_DECLS
 334
 335 #endif /* KERNEL */
 336
 337 /*
 338  * The arguments to the ctlinput routine are
 339  *      (*protosw[].pr_ctlinput)(cmd, sa, arg);
 340  * where cmd is one of the commands below, sa is a pointer to a sockaddr,
 341  * and arg is a `void *' argument used within a protocol family.
 342  */
 343 #define PRC_IFDOWN              0       /* interface transition */
 344 #define PRC_ROUTEDEAD           1       /* select new route if possible ??? */
 345 #define PRC_IFUP                2       /* interface has come back up */
 346 #define PRC_QUENCH2             3       /* DEC congestion bit says slow down */
 347 #define PRC_QUENCH              4       /* some one said to slow down */
 348 #define PRC_MSGSIZE             5       /* message size forced drop */
 349 #define PRC_HOSTDEAD            6       /* host appears to be down */
 350 #define PRC_HOSTUNREACH         7       /* deprecated (use PRC_UNREACH_HOST) */
 351 #define PRC_UNREACH_NET         8       /* no route to network */
 352 #define PRC_UNREACH_HOST        9       /* no route to host */
 353 #define PRC_UNREACH_PROTOCOL    10      /* dst says bad protocol */
 354 #define PRC_UNREACH_PORT        11      /* bad port # */
 355 /* was  PRC_UNREACH_NEEDFRAG    12         (use PRC_MSGSIZE) */
 356 #define PRC_UNREACH_SRCFAIL     13      /* source route failed */
 357 #define PRC_REDIRECT_NET        14      /* net routing redirect */
 358 #define PRC_REDIRECT_HOST       15      /* host routing redirect */
 359 #define PRC_REDIRECT_TOSNET     16      /* redirect for type of service & net */
 360 #define PRC_REDIRECT_TOSHOST    17      /* redirect for tos & host */
 361 #define PRC_TIMXCEED_INTRANS    18      /* packet lifetime expired in transit */
 362 #define PRC_TIMXCEED_REASS      19      /* lifetime expired on reass q */
 363 #define PRC_PARAMPROB           20      /* header incorrect */
 364 #define PRC_UNREACH_ADMIN_PROHIB        21      /* packet administrativly prohibited */
 365
 366 #define PRC_NCMDS               22
 367
 368 #define PRC_IS_REDIRECT(cmd)    \
 369         ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST)
 370
 371 #ifdef PRCREQUESTS
 372 char    *prcrequests[] = {
 373         "IFDOWN", "ROUTEDEAD", "IFUP", "DEC-BIT-QUENCH2",
 374         "QUENCH", "MSGSIZE", "HOSTDEAD", "#7",
 375         "NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH",
 376         "#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT",
 377         "TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS",
 378         "PARAMPROB", "ADMIN-UNREACH"
 379 };
 380 #endif
 381
 382 /*
 383  * The arguments to ctloutput are:
 384  *      (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p);
 385  * req is one of the actions listed below, so is a (struct socket *),
 386  * level is an indication of which protocol layer the option is intended.
 387  * optname is a protocol dependent socket option request,
 388  * optval is a pointer to a mbuf-chain pointer, for value-return results.
 389  * The protocol is responsible for disposal of the mbuf chain *optval
 390  * if supplied,
 391  * the caller is responsible for any space held by *optval, when returned.
 392  * A non-zero return from usrreq gives an
 393  * UNIX error number which should be passed to higher level software.
 394  */
 395 #define PRCO_GETOPT     0
 396 #define PRCO_SETOPT     1
 397
 398 #define PRCO_NCMDS      2
 399
 400 #ifdef PRCOREQUESTS
 401 char    *prcorequests[] = {
 402         "GETOPT", "SETOPT",
 403 };
 404 #endif
 405
 406 #ifdef KERNEL
 407
 408 __BEGIN_DECLS
 409 void    domaininit(void);
 410
 411 void    pfctlinput(int, struct sockaddr *);
 412 void    pfctlinput2(int, struct sockaddr *, void *);
 413 struct protosw *pffindproto(int family, int protocol, int type);
 414 struct protosw *pffindproto_locked(int family, int protocol, int type);
 415 struct protosw *pffindtype(int family, int type);
 416
 417 extern int net_add_proto(struct protosw *, struct domain *);
 418 extern int net_del_proto(int, int, struct domain *);
 419
 420 __END_DECLS
 421
 422 /* Temp hack to link static domains together */
 423
 424 #define LINK_PROTOS(psw) \
 425 static void link_ ## psw ## _protos() \
 426 { \
 427       int i; \
 428                  \
 429     for (i=0; i < ((sizeof(psw)/sizeof(psw[0])) - 1); i++) \
 430              psw[i].pr_next = &psw[i + 1]; \
 431 }
 432
 433 #endif
 434
 435 #endif /* PRIVATE */
 436 #endif  /* !_SYS_PROTOSW_H_ */