libsecurity_keychain/lib/SecBase64P.h

   1 /* /////////////////////////////////////////////////////////////////////////////
   2  * File:        b64/b64.h
   3  *
   4  * Purpose:     Header file for the b64 library
   5  *
   6  * Created:     18th October 2004
   7  * Updated:     2nd August 2006
   8  *
   9  * Thanks:      To Adam McLaurin, for ideas regarding the SecBase64Decode2() and SecBase64Encode2().
  10  *
  11  * Home:        http://synesis.com.au/software/
  12  *
  13  * Copyright (c) 2004-2006, Matthew Wilson and Synesis Software
  14  * All rights reserved.
  15  *
  16  * Redistribution and use in source and binary forms, with or without
  17  * modification, are permitted provided that the following conditions are met:
  18  *
  19  * - Redistributions of source code must retain the above copyright notice, this
  20  *   list of conditions and the following disclaimer.
  21  * - Redistributions in binary form must reproduce the above copyright notice,
  22  *   this list of conditions and the following disclaimer in the documentation
  23  *   and/or other materials provided with the distribution.
  24  * - Neither the name(s) of Matthew Wilson and Synesis Software nor the names of
  25  *   any contributors may be used to endorse or promote products derived from
  26  *   this software without specific prior written permission.
  27  *
  28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  29  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  30  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  31  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  32  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  34  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  35  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  36  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  37  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38  * POSSIBILITY OF SUCH DAMAGE.
  39  *
  40  * ////////////////////////////////////////////////////////////////////////// */
  41
  42
  43 /** \file b64/b64.h
  44  *
  45  * \brief [C/C++] Header file for the b64 library.
  46  */
  47
  48 #ifndef _SEC_BASE64_H_
  49 #define _SEC_BASE64_H_
  50
  51 #include <stdint.h>
  52 #include <stddef.h>
  53
  54 #ifdef __cplusplus
  55 extern "C" {
  56 #endif /* __cplusplus */
  57
  58 /* /////////////////////////////////////////////////////////////////////////////
  59  * Enumerations
  60  */
  61
  62 /** \brief Return codes (from SecBase64Encode2() / SecBase64Decode2())
  63  */
  64 enum
  65 {
  66     kSecB64_R_OK                   =   0,   /*!< operation was successful. */
  67     kSecB64_R_INSUFFICIENT_BUFFER  =   1,   /*!< The given translation buffer was not of sufficient size. */
  68     kSecB64_R_TRUNCATED_INPUT      =   2,   /*!< The input did not represent a fully formed stream of octet couplings. */
  69     kSecB64_R_DATA_ERROR           =   3   /*!< invalid data. */
  70 };
  71
  72 typedef uint32_t SecBase64Result;
  73
  74 /** \brief Coding behaviour modification flags (for SecBase64Encode2() / SecBase64Decode2())
  75  */
  76 enum
  77 {
  78         kSecB64_F_LINE_LEN_USE_PARAM    =   0x0000  /*!< Uses the lineLen parameter to SecBase64Encode2(). Ignored by SecBase64Decode2(). */
  79     ,   kSecB64_F_LINE_LEN_INFINITE     =   0x0001  /*!< Ignores the lineLen parameter to SecBase64Encode2(). Line length is infinite. Ignored by SecBase64Decode2(). */
  80     ,   kSecB64_F_LINE_LEN_64           =   0x0002  /*!< Ignores the lineLen parameter to SecBase64Encode2(). Line length is 64. Ignored by SecBase64Decode2(). */
  81     ,   kSecB64_F_LINE_LEN_76           =   0x0003  /*!< Ignores the lineLen parameter to SecBase64Encode2(). Line length is 76. Ignored by SecBase64Decode2(). */
  82     ,   kSecB64_F_LINE_LEN_MASK         =   0x000f  /*!< Mask for testing line length flags to SecBase64Encode2(). Ignored by SecBase64Encode2(). */
  83     ,   kSecB64_F_STOP_ON_NOTHING       =   0x0000  /*!< Decoding ignores all invalid characters in the input data. Ignored by SecBase64Encode2(). */
  84     ,   kSecB64_F_STOP_ON_UNKNOWN_CHAR  =   0x0100  /*!< Causes decoding to break if any non-Base-64 [a-zA-Z0-9=+/], non-whitespace character is encountered. Ignored by SecBase64Encode2(). */
  85     ,   kSecB64_F_STOP_ON_UNEXPECTED_WS =   0x0200  /*!< Causes decoding to break if any unexpected whitespace is encountered. Ignored by SecBase64Encode2(). */
  86     ,   kSecB64_F_STOP_ON_BAD_CHAR      =   0x0300  /*!< Causes decoding to break if any non-Base-64 [a-zA-Z0-9=+/] character is encountered. Ignored by SecBase64Encode2(). */
  87 };
  88
  89 typedef uint32_t SecBase64Flags;
  90
  91 /* /////////////////////////////////////////////////////////////////////////////
  92  * Functions
  93  */
  94
  95 #if 0
  96 static inline size_t SecBase64EncodedSize(size_t srcSize, size_t lineLen) {
  97     size_t total = (((srcSize) + 2) / 3) * 4;
  98     size_t lineLen = (lineLen);
  99     if (lineLen > 0) {
 100         size_t numLines = (total + (lineLen - 1)) / lineLen;
 101         total += 2 * (numLines - 1);
 102     }
 103     return total;
 104 }
 105 #endif
 106
 107 /** \brief Encodes a block of binary data into base64
 108  *
 109  * \param src Pointer to the block to be encoded. May not be NULL, except when
 110  *   \c dest is NULL, in which case it is ignored.
 111  * \param srcSize Length of block to be encoded
 112  * \param dest Pointer to the buffer into which the result is to be written. May
 113  *   be NULL, in which case the function returns the required length
 114  * \param destLen Length of the buffer into which the result is to be written. Must
 115  *   be at least as large as that indicated by the return value from
 116  * \c SecBase64Encode()(NULL, srcSize, NULL, 0).
 117  *
 118  * \return 0 if the size of the buffer was insufficient, or the length of the
 119  * converted buffer was longer than \c destLen
 120  *
 121  * \note The function returns the required length if \c dest is NULL
 122  *
 123  * \note The function returns the required length if \c dest is NULL. The returned size
 124  *   might be larger than the actual required size, but will never be smaller.
 125  *
 126  * \note Threading: The function is fully re-entrant.
 127  */
 128 size_t SecBase64Encode(void const *src, size_t srcSize, char *dest, size_t destLen);
 129
 130 /** \brief Encodes a block of binary data into base64
 131  *
 132  * \param src Pointer to the block to be encoded. May not be NULL, except when
 133  *   \c dest is NULL, in which case it is ignored.
 134  * \param srcSize Length of block to be encoded
 135  * \param dest Pointer to the buffer into which the result is to be written. May
 136  *   be NULL, in which case the function returns the required length
 137  * \param destLen Length of the buffer into which the result is to be written. Must
 138  *   be at least as large as that indicated by the return value from
 139  *   \c SecBase64Encode()(NULL, srcSize, NULL, 0).
 140  * \param flags A combination of the SecBase64Flags enumeration, that moderate the
 141  *   behaviour of the function
 142  * \param lineLen If the flags parameter contains kSecB64_F_LINE_LEN_USE_PARAM, then
 143  *   this parameter represents the length of the lines into which the encoded form is split,
 144  *   with a hard line break ('\\r\\n'). If this value is 0, then the line is not
 145  *   split. If it is <0, then the RFC-1113 recommended line length of 64 is used
 146  * \param rc The return code representing the status of the operation. May be NULL.
 147  *
 148  * \return 0 if the size of the buffer was insufficient, or the length of the
 149  *   converted buffer was longer than \c destLen
 150  *
 151  * \note The function returns the required length if \c dest is NULL. The returned size
 152  *   might be larger than the actual required size, but will never be smaller.
 153  *
 154  * \note Threading: The function is fully re-entrant.
 155  */
 156 size_t SecBase64Encode2( void const  *src
 157                 ,   size_t      srcSize
 158                 ,   char        *dest
 159                 ,   size_t      destLen
 160                 ,   unsigned    flags
 161                 ,   int         lineLen /* = 0 */
 162                 ,   SecBase64Result      *rc     /* = NULL */);
 163
 164 /** \brief Decodes a sequence of base64 into a block of binary data
 165  *
 166  * \param src Pointer to the base64 block to be decoded. May not be NULL, except when
 167  *   \c dest is NULL, in which case it is ignored. If \c dest is NULL, and \c src is
 168  *   <b>not</b> NULL, then the returned value is calculated exactly, otherwise a value
 169  *   is returned that is guaranteed to be large enough to hold the decoded block.
 170  *
 171  * \param srcLen Length of block to be encoded. Must be an integral of 4, the base64
 172  *   encoding quantum, otherwise the base64 block is assumed to be invalid
 173  * \param dest Pointer to the buffer into which the result is to be written. May
 174  *   be NULL, in which case the function returns the required length
 175  * \param destSize Length of the buffer into which the result is to be written. Must
 176  *   be at least as large as that indicated by the return value from
 177  *   \c SecBase64Decode(src, srcSize, NULL, 0), even in the case where the encoded form
 178  *   contains a number of characters that will be ignored, resulting in a lower total
 179  *   length of converted form.
 180  *
 181  * \return 0 if the size of the buffer was insufficient, or the length of the
 182  *   converted buffer was longer than \c destSize
 183  *
 184  * \note The function returns the required length if \c dest is NULL. The returned size
 185  *   might be larger than the actual required size, but will never be smaller.
 186  *
 187  * \note \anchor anchor__4_characters The behaviour of both
 188  * \link b64::SecBase64Encode2 SecBase64Encode2()\endlink
 189  * and
 190  * \link b64::SecBase64Decode2 SecBase64Decode2()\endlink
 191  * are undefined if the line length is not a multiple of 4.
 192  *
 193  * \note Threading: The function is fully re-entrant.
 194  */
 195 size_t SecBase64Decode(char const *src, size_t srcLen, void *dest, size_t destSize);
 196
 197 /** \brief Decodes a sequence of base64 into a block of binary data
 198  *
 199  * \param src Pointer to the base64 block to be decoded. May not be NULL, except when
 200  * \c dest is NULL, in which case it is ignored. If \c dest is NULL, and \c src is
 201  * <b>not</b> NULL, then the returned value is calculated exactly, otherwise a value
 202  * is returned that is guaranteed to be large enough to hold the decoded block.
 203  *
 204  * \param srcLen Length of block to be encoded. Must be an integral of 4, the base64
 205  *   encoding quantum, otherwise the base64 block is assumed to be invalid
 206  * \param dest Pointer to the buffer into which the result is to be written. May
 207  *   be NULL, in which case the function returns the required length
 208  * \param destSize Length of the buffer into which the result is to be written. Must
 209  *   be at least as large as that indicated by the return value from
 210  *   \c SecBase64Decode(src, srcSize, NULL, 0), even in the case where the encoded form
 211  *   contains a number of characters that will be ignored, resulting in a lower total
 212  *   length of converted form.
 213  * \param flags A combination of the SecBase64Flags enumeration, that moderate the
 214  *   behaviour of the function.
 215  * \param rc The return code representing the status of the operation. May be NULL.
 216  * \param badChar If the flags parameter does not contain kSecB64_F_STOP_ON_NOTHING, this
 217  *   parameter specifies the address of a pointer that will be set to point to any
 218  *   character in the sequence that stops the parsing, as dictated by the flags
 219  *   parameter. May be NULL.
 220  *
 221  * \return 0 if the size of the buffer was insufficient, or the length of the
 222  * converted buffer was longer than \c destSize, or a bad character stopped parsing.
 223  *
 224  * \note The function returns the required length if \c dest is NULL. The returned size
 225  *   might be larger than the actual required size, but will never be smaller.
 226  *
 227  * \note The behaviour of both
 228  * \link b64::SecBase64Encode2 SecBase64Encode2()\endlink
 229  * and
 230  * \link b64::SecBase64Decode2 SecBase64Decode2()\endlink
 231  * are undefined if the line length is not a multiple of 4.
 232  *
 233  * \note Threading: The function is fully re-entrant.
 234  */
 235 size_t SecBase64Decode2( char const  *src
 236                 ,   size_t      srcLen
 237                 ,   void        *dest
 238                 ,   size_t      destSize
 239                 ,   unsigned    flags
 240                 ,   char const  **badChar   /* = NULL */
 241                 ,   SecBase64Result      *rc         /* = NULL */);
 242
 243 #ifdef __cplusplus
 244 }
 245 #endif /* __cplusplus */
 246
 247 #endif /* _SEC_BASE64_H_ */