]> git.saurik.com Git - apple/security.git/blob - OSX/libsecurity_smime/lib/cmslocal.h
Security-58286.270.3.0.1.tar.gz
[apple/security.git] / OSX / libsecurity_smime / lib / cmslocal.h
1 /*
2 * The contents of this file are subject to the Mozilla Public
3 * License Version 1.1 (the "License"); you may not use this file
4 * except in compliance with the License. You may obtain a copy of
5 * the License at http://www.mozilla.org/MPL/
6 *
7 * Software distributed under the License is distributed on an "AS
8 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
9 * implied. See the License for the specific language governing
10 * rights and limitations under the License.
11 *
12 * The Original Code is the Netscape security libraries.
13 *
14 * The Initial Developer of the Original Code is Netscape
15 * Communications Corporation. Portions created by Netscape are
16 * Copyright (C) 1994-2000 Netscape Communications Corporation. All
17 * Rights Reserved.
18 *
19 * Contributor(s):
20 *
21 * Alternatively, the contents of this file may be used under the
22 * terms of the GNU General Public License Version 2 or later (the
23 * "GPL"), in which case the provisions of the GPL are applicable
24 * instead of those above. If you wish to allow use of your
25 * version of this file only under the terms of the GPL and not to
26 * allow others to use your version of this file under the MPL,
27 * indicate your decision by deleting the provisions above and
28 * replace them with the notice and other provisions required by
29 * the GPL. If you do not delete the provisions above, a recipient
30 * may use your version of this file under either the MPL or the
31 * GPL.
32 */
33
34 /*
35 * Support routines for CMS implementation, none of which are exported.
36 *
37 * Do not export this file! If something in here is really needed outside
38 * of smime code, first try to add a CMS interface which will do it for
39 * you. If that has a problem, then just move out what you need, changing
40 * its name as appropriate!
41 */
42
43 #ifndef _CMSLOCAL_H_
44 #define _CMSLOCAL_H_
45
46 #include "cmspriv.h"
47 #include "cmsreclist.h"
48 #include <Security/secasn1t.h>
49
50 extern const SecAsn1Template SecCmsIssuerAndSNTemplate[];
51 #if 0
52 extern const SecAsn1Template SecCmsContentInfoTemplate[];
53 #endif
54
55 /************************************************************************/
56 SEC_BEGIN_PROTOS
57
58 /***********************************************************************
59 * cmscipher.c - en/decryption routines
60 ***********************************************************************/
61
62 /*
63 * SecCmsCipherContextStartDecrypt - create a cipher context to do decryption
64 * based on the given bulk * encryption key and algorithm identifier (which may include an iv).
65 */
66 extern SecCmsCipherContextRef
67 SecCmsCipherContextStartDecrypt(SecSymmetricKeyRef key, SECAlgorithmID *algid);
68
69 /*
70 * SecCmsCipherContextStartEncrypt - create a cipher object to do encryption,
71 * based on the given bulk encryption key and algorithm tag. Fill in the algorithm
72 * identifier (which may include an iv) appropriately.
73 */
74 extern SecCmsCipherContextRef
75 SecCmsCipherContextStartEncrypt(PRArenaPool *poolp, SecSymmetricKeyRef key, SECAlgorithmID *algid);
76
77 extern void
78 SecCmsCipherContextDestroy(SecCmsCipherContextRef cc);
79
80 /*
81 * SecCmsCipherContextDecryptLength - find the output length of the next call to decrypt.
82 *
83 * cc - the cipher context
84 * input_len - number of bytes used as input
85 * final - true if this is the final chunk of data
86 *
87 * Result can be used to perform memory allocations. Note that the amount
88 * is exactly accurate only when not doing a block cipher or when final
89 * is false, otherwise it is an upper bound on the amount because until
90 * we see the data we do not know how many padding bytes there are
91 * (always between 1 and bsize).
92 */
93 extern size_t
94 SecCmsCipherContextDecryptLength(SecCmsCipherContextRef cc, size_t input_len, Boolean final);
95
96 /*
97 * SecCmsCipherContextEncryptLength - find the output length of the next call to encrypt.
98 *
99 * cc - the cipher context
100 * input_len - number of bytes used as input
101 * final - true if this is the final chunk of data
102 *
103 * Result can be used to perform memory allocations.
104 */
105 extern size_t
106 SecCmsCipherContextEncryptLength(SecCmsCipherContextRef cc, size_t input_len, Boolean final);
107
108 /*
109 * SecCmsCipherContextDecrypt - do the decryption
110 *
111 * cc - the cipher context
112 * output - buffer for decrypted result bytes
113 * output_len_p - number of bytes in output
114 * max_output_len - upper bound on bytes to put into output
115 * input - pointer to input bytes
116 * input_len - number of input bytes
117 * final - true if this is the final chunk of data
118 *
119 * Decrypts a given length of input buffer (starting at "input" and
120 * containing "input_len" bytes), placing the decrypted bytes in
121 * "output" and storing the output length in "*output_len_p".
122 * "cc" is the return value from SecCmsCipherStartDecrypt.
123 * When "final" is true, this is the last of the data to be decrypted.
124 */
125 extern OSStatus
126 SecCmsCipherContextDecrypt(SecCmsCipherContextRef cc, unsigned char *output,
127 size_t *output_len_p, size_t max_output_len,
128 const unsigned char *input, size_t input_len,
129 Boolean final);
130
131 /*
132 * SecCmsCipherContextEncrypt - do the encryption
133 *
134 * cc - the cipher context
135 * output - buffer for decrypted result bytes
136 * output_len_p - number of bytes in output
137 * max_output_len - upper bound on bytes to put into output
138 * input - pointer to input bytes
139 * input_len - number of input bytes
140 * final - true if this is the final chunk of data
141 *
142 * Encrypts a given length of input buffer (starting at "input" and
143 * containing "input_len" bytes), placing the encrypted bytes in
144 * "output" and storing the output length in "*output_len_p".
145 * "cc" is the return value from SecCmsCipherStartEncrypt.
146 * When "final" is true, this is the last of the data to be encrypted.
147 */
148 extern OSStatus
149 SecCmsCipherContextEncrypt(SecCmsCipherContextRef cc, unsigned char *output,
150 size_t *output_len_p, size_t max_output_len,
151 const unsigned char *input, size_t input_len,
152 Boolean final);
153
154 /************************************************************************
155 * cmspubkey.c - public key operations
156 ************************************************************************/
157
158 /*
159 * SecCmsUtilEncryptSymKeyRSA - wrap a symmetric key with RSA
160 *
161 * this function takes a symmetric key and encrypts it using an RSA public key
162 * according to PKCS#1 and RFC2633 (S/MIME)
163 */
164 extern OSStatus
165 SecCmsUtilEncryptSymKeyRSA(PLArenaPool *poolp, SecCertificateRef cert,
166 SecSymmetricKeyRef key,
167 CSSM_DATA_PTR encKey);
168
169 extern OSStatus
170 SecCmsUtilEncryptSymKeyRSAPubKey(PLArenaPool *poolp,
171 SecPublicKeyRef publickey,
172 SecSymmetricKeyRef bulkkey, CSSM_DATA_PTR encKey);
173
174 /*
175 * SecCmsUtilDecryptSymKeyRSA - unwrap a RSA-wrapped symmetric key
176 *
177 * this function takes an RSA-wrapped symmetric key and unwraps it, returning a symmetric
178 * key handle. Please note that the actual unwrapped key data may not be allowed to leave
179 * a hardware token...
180 */
181 extern SecSymmetricKeyRef
182 SecCmsUtilDecryptSymKeyRSA(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey, SECOidTag bulkalgtag);
183
184 extern OSStatus
185 SecCmsUtilEncryptSymKeyECDH(PLArenaPool *poolp, SecCertificateRef cert, SecSymmetricKeyRef key,
186 CSSM_DATA_PTR encKey, CSSM_DATA_PTR ukm, SECAlgorithmID *keyEncAlg,
187 CSSM_DATA_PTR originatorPubKey);
188
189 extern SecSymmetricKeyRef
190 SecCmsUtilDecryptSymKeyECDH(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey, CSSM_DATA_PTR ukm,
191 SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, CSSM_DATA_PTR pubKey);
192
193 #if 0
194 extern OSStatus
195 SecCmsUtilEncryptSymKeyMISSI(PLArenaPool *poolp, SecCertificateRef cert, SecSymmetricKeyRef key,
196 SECOidTag symalgtag, CSSM_DATA_PTR encKey, CSSM_DATA_PTR *pparams, void *pwfn_arg);
197
198 extern SecSymmetricKeyRef
199 SecCmsUtilDecryptSymKeyMISSI(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey,
200 SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg);
201
202 extern OSStatus
203 SecCmsUtilEncryptSymKeyESDH(PLArenaPool *poolp, SecCertificateRef cert, SecSymmetricKeyRef key,
204 CSSM_DATA_PTR encKey, CSSM_DATA_PTR ukm, SECAlgorithmID *keyEncAlg,
205 CSSM_DATA_PTR originatorPubKey);
206
207 extern SecSymmetricKeyRef
208 SecCmsUtilDecryptSymKeyESDH(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey,
209 SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg);
210 #endif
211
212 /************************************************************************
213 * cmsreclist.c - recipient list stuff
214 ************************************************************************/
215 extern SecCmsRecipient **nss_cms_recipient_list_create(SecCmsRecipientInfoRef *recipientinfos);
216 extern void nss_cms_recipient_list_destroy(SecCmsRecipient **recipient_list);
217 extern SecCmsRecipientEncryptedKey *SecCmsRecipientEncryptedKeyCreate(PLArenaPool *poolp);
218
219 /************************************************************************
220 * cmsarray.c - misc array functions
221 ************************************************************************/
222 /*
223 * SecCmsArrayAlloc - allocate an array in an arena
224 */
225 extern void **
226 SecCmsArrayAlloc(PRArenaPool *poolp, int n);
227
228 /*
229 * SecCmsArrayAdd - add an element to the end of an array
230 */
231 extern OSStatus
232 SecCmsArrayAdd(PRArenaPool *poolp, void ***array, void *obj);
233
234 /*
235 * SecCmsArrayIsEmpty - check if array is empty
236 */
237 extern Boolean
238 SecCmsArrayIsEmpty(void **array);
239
240 /*
241 * SecCmsArrayCount - count number of elements in array
242 */
243 extern int
244 SecCmsArrayCount(void **array);
245
246 /*
247 * SecCmsArraySort - sort an array ascending, in place
248 *
249 * If "secondary" is not NULL, the same reordering gets applied to it.
250 * If "tertiary" is not NULL, the same reordering gets applied to it.
251 * "compare" is a function that returns
252 * < 0 when the first element is less than the second
253 * = 0 when the first element is equal to the second
254 * > 0 when the first element is greater than the second
255 */
256 extern void
257 SecCmsArraySort(void **primary, int (*compare)(void *,void *), void **secondary, void **tertiary);
258
259 /************************************************************************
260 * cmsattr.c - misc attribute functions
261 ************************************************************************/
262 /*
263 * SecCmsAttributeCreate - create an attribute
264 *
265 * if value is NULL, the attribute won't have a value. It can be added later
266 * with SecCmsAttributeAddValue.
267 */
268 extern SecCmsAttribute *
269 SecCmsAttributeCreate(PRArenaPool *poolp, SECOidTag oidtag, CSSM_DATA_PTR value, Boolean encoded);
270
271 /*
272 * SecCmsAttributeAddValue - add another value to an attribute
273 */
274 extern OSStatus
275 SecCmsAttributeAddValue(PLArenaPool *poolp, SecCmsAttribute *attr, CSSM_DATA_PTR value);
276
277 /*
278 * SecCmsAttributeGetType - return the OID tag
279 */
280 extern SECOidTag
281 SecCmsAttributeGetType(SecCmsAttribute *attr);
282
283 /*
284 * SecCmsAttributeGetValue - return the first attribute value
285 *
286 * We do some sanity checking first:
287 * - Multiple values are *not* expected.
288 * - Empty values are *not* expected.
289 */
290 extern CSSM_DATA_PTR
291 SecCmsAttributeGetValue(SecCmsAttribute *attr);
292
293 /*
294 * SecCmsAttributeCompareValue - compare the attribute's first value against data
295 */
296 extern Boolean
297 SecCmsAttributeCompareValue(SecCmsAttribute *attr, CSSM_DATA_PTR av);
298
299 /*
300 * SecCmsAttributeArrayEncode - encode an Attribute array as SET OF Attributes
301 *
302 * If you are wondering why this routine does not reorder the attributes
303 * first, and might be tempted to make it do so, see the comment by the
304 * call to ReorderAttributes in cmsencode.c. (Or, see who else calls this
305 * and think long and hard about the implications of making it always
306 * do the reordering.)
307 */
308 extern CSSM_DATA_PTR
309 SecCmsAttributeArrayEncode(PRArenaPool *poolp, SecCmsAttribute ***attrs, CSSM_DATA_PTR dest);
310
311 /*
312 * SecCmsAttributeArrayReorder - sort attribute array by attribute's DER encoding
313 *
314 * make sure that the order of the attributes guarantees valid DER (which must be
315 * in lexigraphically ascending order for a SET OF); if reordering is necessary it
316 * will be done in place (in attrs).
317 */
318 extern OSStatus
319 SecCmsAttributeArrayReorder(SecCmsAttribute **attrs);
320
321 /*
322 * SecCmsAttributeArrayFindAttrByOidTag - look through a set of attributes and
323 * find one that matches the specified object ID.
324 *
325 * If "only" is true, then make sure that there is not more than one attribute
326 * of the same type. Otherwise, just return the first one found. (XXX Does
327 * anybody really want that first-found behavior? It was like that when I found it...)
328 */
329 extern SecCmsAttribute *
330 SecCmsAttributeArrayFindAttrByOidTag(SecCmsAttribute **attrs, SECOidTag oidtag, Boolean only);
331
332 /*
333 * SecCmsAttributeArrayAddAttr - add an attribute to an
334 * array of attributes.
335 */
336 extern OSStatus
337 SecCmsAttributeArrayAddAttr(PLArenaPool *poolp, SecCmsAttribute ***attrs, SecCmsAttribute *attr);
338
339 /*
340 * SecCmsAttributeArraySetAttr - set an attribute's value in a set of attributes
341 */
342 extern OSStatus
343 SecCmsAttributeArraySetAttr(PLArenaPool *poolp, SecCmsAttribute ***attrs, SECOidTag type, CSSM_DATA_PTR value, Boolean encoded);
344
345 /************************************************************************/
346 SEC_END_PROTOS
347
348 #endif /* _CMSLOCAL_H_ */