1 /* $Id: proposal.h,v 1.5.10.1 2005/05/12 19:34:10 manubsd Exp $ */
4 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of the project nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 #include <sys/queue.h>
38 * A. chained list of transform, only for single proto_id
39 * (this is same as set of transforms in single proposal payload)
40 * B. proposal. this will point to multiple (A) items (order is important
41 * here so pointer to (A) must be ordered array, or chained list).
42 * this covers multiple proposal on a packet if proposal # is the same.
43 * C. finally, (B) needs to be connected as chained list.
45 * head ---> prop[.......] ---> prop[...] ---> prop[...] ---> ...
47 * | | | +- proto4 <== must preserve order here
50 * +------- proto1[trans1, trans2, trans3, ...]
52 * incoming packets needs to be parsed to construct the same structure
53 * (check "prop_pair" too).
55 /* SA proposal specification */
60 int pfs_group
; /* pfs group */
61 int claim
; /* flag to send RESPONDER-LIFETIME. */
62 /* XXX assumed DOI values are 1 or 2. */
68 /* SA protocol specification */
71 size_t spisize
; /* spi size */
72 int encmode
; /* encryption mode */
74 int udp_encap
; /* UDP encapsulation */
76 /* XXX should be vchar_t * */
77 /* these are network byte order */
78 u_int32_t spi
; /* inbound. i.e. --SA-> me */
79 u_int32_t spi_p
; /* outbound. i.e. me -SA-> */
81 vchar_t
*keymat
; /* KEYMAT */
82 vchar_t
*keymat_p
; /* peer's KEYMAT */
84 int reqid_out
; /* request id (outbound) */
85 int reqid_in
; /* request id (inbound) */
87 int ok
; /* if 1, success to set SA in kenrel */
89 struct satrns
*head
; /* header of transform */
90 struct saproto
*next
; /* next protocol */
93 /* SA algorithm specification */
96 int trns_id
; /* transform id */
97 int encklen
; /* key length of encryption algorithm */
98 int authtype
; /* authentication algorithm if ESP */
100 struct satrns
*next
; /* next transform */
104 * prop_pair: (proposal number, transform number)
106 * (SA (P1 (T1 T2)) (P1' (T1' T2')) (P2 (T1" T2")))
109 * top (P1,T1) (P2",T1")
112 * | (P1, T2) (P2", T2")
119 * when we convert it to saprop in prop2saprop(), it should become like:
122 * saprop --------------------> saprop
124 * +-> saproto +-> saproto
125 * | | (head) | (head)
126 * | +-> satrns(P1 T1) +-> satrns(P2" T1")
127 * | | (next) | (next)
129 * | satrns(P1, T2) satrns(P2", T2")
133 * +-> satrns(P1' T1')
139 struct isakmp_pl_p
*prop
;
140 struct isakmp_pl_t
*trns
;
141 struct prop_pair
*next
; /* next prop_pair with same proposal # */
143 struct prop_pair
*tnext
; /* next prop_pair in same proposal payload */
144 /* (multiple tranform case) */
146 #define MAXPROPPAIRLEN 256 /* It's enough because field size is 1 octet. */
149 * Lifetime length selection refered to the section 4.5.4 of RFC2407. It does
150 * not completely conform to the description of RFC. There are four types of
151 * the behavior. If the value of "proposal_check" in "remote" directive is;
153 * the responder obey the initiator anytime.
155 * If the responder's length is longer than the initiator's one, the
156 * responder uses the intitiator's one. Otherwise rejects the proposal.
157 * If PFS is not required by the responder, the responder obeys the
158 * proposal. If PFS is required by both sides and if the responder's
159 * group is not equal to the initiator's one, then the responder reject
162 * If the responder's length is longer than the initiator's one, the
163 * responder use the intitiator's one. If the responder's length is
164 * shorter than the initiator's one, the responder uses own length
165 * AND send RESPONDER-LIFETIME notify message to a initiator in the
167 * About PFS, this directive is same as "strict".
169 * If the initiator's length is not equal to the responder's one, the
170 * responder rejects the proposal.
171 * If PFS is required and if the responder's group is not equal to
172 * the initiator's one, then the responder reject the proposal.
173 * XXX should be defined the behavior of key length.
175 #define PROP_CHECK_OBEY 1
176 #define PROP_CHECK_STRICT 2
177 #define PROP_CHECK_CLAIM 3
178 #define PROP_CHECK_EXACT 4
183 extern struct saprop
*newsaprop
__P((void));
184 extern struct saproto
*newsaproto
__P((void));
185 extern void inssaprop
__P((struct saprop
**, struct saprop
*));
186 extern void inssaproto
__P((struct saprop
*, struct saproto
*));
187 extern void inssaprotorev
__P((struct saprop
*, struct saproto
*));
188 extern struct satrns
*newsatrns
__P((void));
189 extern void inssatrns
__P((struct saproto
*, struct satrns
*));
190 extern struct saprop
*cmpsaprop_alloc
__P((struct ph1handle
*,
191 const struct saprop
*, const struct saprop
*, int));
192 extern int cmpsaprop
__P((const struct saprop
*, const struct saprop
*));
193 extern int cmpsatrns
__P((int, const struct satrns
*, const struct satrns
*));
194 extern int set_satrnsbysainfo
__P((struct saproto
*, struct sainfo
*));
195 extern struct saprop
*aproppair2saprop
__P((struct prop_pair
*));
196 extern void free_proppair
__P((struct prop_pair
**));
197 extern void flushsaprop
__P((struct saprop
*));
198 extern void flushsaproto
__P((struct saproto
*));
199 extern void flushsatrns
__P((struct satrns
*));
200 extern void printsaprop
__P((const int, const struct saprop
*));
201 extern void printsaprop0
__P((const int, const struct saprop
*));
202 extern void printsaproto
__P((const int, const struct saproto
*));
203 extern void printsatrns
__P((const int, const int, const struct satrns
*));
204 extern void print_proppair0
__P((int, struct prop_pair
*, int));
205 extern void print_proppair
__P((int, struct prop_pair
*));
206 extern int set_proposal_from_policy
__P((struct ph2handle
*,
207 struct secpolicy
*, struct secpolicy
*));
208 extern int set_proposal_from_proposal
__P((struct ph2handle
*));
209 extern int tunnel_mode_prop
__P((struct saprop
*p
));
211 #endif /* _PROPOSAL_H */