* subpipe.c (init_subpipe): Check the environment variables
TMPDIR, TMP and TEMP, in that order, to determinate where the temp
files shall be created. Before trying to use the temp dir where the
environment variable points to check that the dir really exists. If
not default to the cwd as temp dir. Copyright timestamp adjusted.
DJGPP specific issues.
* djgpp/config.bat: Add filenames that are not 8.3 clean and that must
be changed. Copyright timestamp adjusted.
* djgpp/config.sed: Add filenames that are not 8.3 clean and that must
be changed. Copyright timestamp adjusted.
* djgpp/config.site: Copyright timestamp adjusted.
* djgpp/config_h.sed: Copyright timestamp adjusted.
* djgpp/djunpack.bat: Copyright timestamp adjusted.
* djgpp/fnchnage.lst: Add filenames that are not 8.3 clean to the
filename translation list.
* djgpp/subpipe.c (init_subpipe): Check the environment variables
TMPDIR, TMP and TEMP, in that order, to determinate where the temp
files shall be created. Before trying to use the temp dir where the
environment variable points to check that the dir really exists. If
not default to the cwd as temp dir. Copyright timestamp adjusted.
* djgpp/subpipe.h: Copyright timestamp adjusted.
* djgpp/testsuite.sed: Copyright timestamp adjusted.
Joel E. Denny [Sat, 22 Dec 2007 18:35:03 +0000 (18:35 +0000)]
Automate regression testing of the XML/XSLT implementation. Discussed
starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-11/msg00021.html>.
* configure.ac (XSLTPROC): New substitution.
* Makefile.am (maintainer-xml-check): New phony target invoking...
* tests/Makefile.am (maintainer-xml-check): ... this new phony target
invoking make maintainer-check with BISON_TEST_XML=1.
* tests/atlocal.in (XSLTPROC): New.
* tests/local.at (AT_BISON_CHECK): New macro to (1) instruct Valgrind
not to report reachable memory when Bison is expected to have a
non-zero exit status and (2) to compare XML/XSLT output with --graph
and --report=all output for every working grammar when
BISON_TEST_XML=1.
(AT_BISON_CHECK_NO_XML): Likewise, but skip XML checks.
(AT_BISON_CHECK_XML): New.
(AT_QUELL_VALGRIND): New.
* tests/testsuite.at (ORIGINAL_AT_CHECK): Remove this and...
(AT_CHECK): ... don't redefine this since this was the old way to
quell Valgrind.
* tests/actions.at: Rewrite all AT_CHECK invocations for bison as
AT_BISON_CHECK invocations.
* tests/c++.at: Likewise.
* tests/calc.at: Likewise.
* tests/conflicts.at: Likewise.
* tests/cxx-type.at: Likewise.
* tests/existing.at: Likewise.
* tests/glr-regression.at: Likewise.
* tests/headers.at: Likewise.
* tests/input.at: Likewise.
* tests/java.at: Likewise.
* tests/output.at: Likewise.
* tests/push.at: Likewise.
* tests/reduce.at: Likewise.
* tests/regression.at: Likewise.
* tests/sets.at: Likewise.
* tests/skeletons.at: Likewise.
* tests/synclines.at: Likewise.
* tests/torture.at: Likewise.
(Big triangle): Use AT_BISON_CHECK_NO_XML instead since this grammar
tends to hang xsltproc.
(Big horizontal): Likewise.
Joel E. Denny [Sat, 15 Dec 2007 02:08:02 +0000 (02:08 +0000)]
In XML output, remove redundant class attribute on symbol element.
* data/xslt/bison.xsl (xsl:key name="bison:symbolByName"): New.
* data/xslt/xml2xhtml.xsl (xsl:template match="symbol"): Use it to
look up a symbol to determine whether it's a nonterminal or terminal.
* src/gram.c (rule_rhs_print_xml): Remove class attribute.
* src/state.c (state_rule_lookahead_tokens_print_xml): Likewise.
Add prec/assoc information to XML output.
* src/gram.c (grammar_rules_print_xml): For each rule that has a
%prec, add a percent_prec attribute.
* src/print-xml.c (print_grammar): For each terminal that has a
precedence or associativity, add a prec or assoc attribute.
(xml_indent): New.
(xml_puts): Use xml_indent.
(xml_printf): Use xml_indent.
* src/print-xml.h (xml_indent): Prototype.
* tests/existing.at (GNU pic Grammar): Fix a rule miscopied from
<http://lists.gnu.org/archive/html/bug-bison/2003-04/msg00026.html>.
In the XML output, don't print the list of rules where symbols appear.
Compute it in XSLT instead. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00024.html>.
* data/xslt/bison.xsl (bison:ruleByLhs): New.
(bison:ruleByRhs): New.
* data/xslt/xml2text.xsl (xsl:template match="terminal"): Use
bison:ruleByRhs.
(xsl:template match="terminal/rule"): Remove.
(xsl:template match="nonterminal"): Use bison:ruleByLhs and
bison:ruleByRhs.
(xsl:template match="nonterminal/left/rule|nonterminal/right/rule"):
Remove.
* data/xslt/xml2xhtml.xsl (xsl:template match="terminal"): Use
bison:ruleByRhs and mode="number-link" for rule template.
(xsl:template match="terminal/rule"): Remove.
(xsl:template match="nonterminal"): Use bison:ruleByLhs and
bison:ruleByRhs and mode="number-link" for rule template.
(xsl:template match="nonterminal/left/rule|nonterminal/right/rule"):
Rewrite as...
(xsl:template match="rule" mode="number-link"): ... this.
* src/print-xml.c (print_grammar): Don't print the list of rules.
Joel E. Denny [Sat, 1 Dec 2007 19:44:36 +0000 (19:44 +0000)]
Don't let --report affect XML output; always print all information.
Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00020.html>.
* src/conflicts.c (log_resolution): Implement.
* src/print-xml.c (print_core): Implement.
(print_state): Implement.
(print_xml): Implement.
* NEWS (2.3a+): Fix quotes.
* src/parse-gram.y (prologue_declaration): For consistency with -v,
don't let %verbose clear the list specified by --report.
Joel E. Denny [Sat, 24 Nov 2007 19:41:25 +0000 (19:41 +0000)]
In the XML output, list useless and unused symbols and rules with the
useful ones and add a "usefulness" attribute. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00017.html>.
* src/gram.c (grammar_rules_partial_print_xml): Remove.
(grammar_rules_print_xml): Print all rules instead of just those
useful in the grammar, and add a "usefulness" attribute.
* src/gram.h (grammar_rules_partial_print_xml): Remove prototype.
* src/print-xml.c (print_rules_useless_in_parser): Remove.
(print_grammar): Print all nonterminals instead of just useful ones,
and add a "usefulness" attribute to nonterminals and terminals.
(print_xml): Don't print a separate "reductions" or
"rules-useless-in-parser" element.
* src/reduce.c (reduce_output): Use reduce_token_unused_in_grammar.
(reduce_xml): Remove.
(reduce_token_unused_in_grammar): New.
(reduce_nonterminal_useless_in_grammar): New.
* src/reduce.h (reduce_xml): Remove prototype.
(reduce_token_unused_in_grammar): Add prototype.
(reduce_nonterminal_useless_in_grammar): Add prototype.
* data/xslt/xml2text.xsl: Update for XML changes.
* data/xslt/xml2xhtml.xsl: Update for XML changes.
* tests/reduce.at (Useless Terminals): Update output.
(Useless Rules): Update output.
(Reduced Automaton): Update output.
Say "Terminals unused in grammar" instead of "Unused terminals".
* NEWS (2.3a+): Update.
* doc/bison.texinfo (Understanding): Update example output.
* src/reduce.c (reduce_output): Implement.
* data/xslt/xml2text.xsl: Implement.
* data/xslt/xml2xhtml.xsl: Implement.
Joel E. Denny [Sun, 18 Nov 2007 06:40:41 +0000 (06:40 +0000)]
Accept --report-file=FILE to override the default `.output' filename.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Bison Options): Add an entry.
* src/files.c (compute_output_file_names): Don't override
spec_verbose_file if already set.
* src/getargs.c (usage): Document --report-file.
(REPORT_FILE_OPTION): New anonymous enum member.
(long_options): Add entry for it.
(getargs): Add case for it setting spec_verbose_file.
* build-aux/cross-options.pl: Don't record a short option just because
there's an arg.
* doc/.cvsignore: Add yacc.1.
Akim Demaille [Wed, 14 Nov 2007 13:18:44 +0000 (13:18 +0000)]
* doc/yacc.1.in: New.
* configure.ac, doc/Makefile.am: Adjust.
* configure.ac (PACKAGE_COPYRIGHT_YEAR): New substitution, and new
config.h symbol.
Use AC_SUBST for assignments too.
* src/getargs.c (version): Use PACKAGE_COPYRIGHT_YEAR.
Joel E. Denny [Sat, 10 Nov 2007 03:42:37 +0000 (03:42 +0000)]
* src/gram.c: Remove comments that duplicate comments in gram.h.
When reporting useless rules and nonterminals, say "useless in grammar"
instead of "useless", and say "useless in parser" instead of "never
reduced". Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-10/msg00033.html>.
* NEWS (2.3a+): Mention this change.
* data/xslt/xml2text.xsl: Update output text and expected input XML
element names to match changes below.
* data/xslt/xml2xhtml.xsl: Likewise.
(xsl:template match="bison-xml-report"): Add missing entry in Table of
Contents: "Rules useless in parser due to conflicts".
* doc/bison.texinfo (Decl Summary): Reword a little.
(Understanding): Update example output for changes below.
* src/gram.c: (rule_useful_p): Rename to...
(rule_useful_in_grammar_p): ... this.
(rule_useless_p): Rename to...
(rule_useless_in_grammar_p): ... this.
(rule_never_reduced_p): Rename to...
(rule_useless_in_parser_p): ... this.
(grammar_rules_print): Update for renames.
(grammar_rules_print_xml): Update for renames.
(grammar_rules_never_reduced_report): Rename to...
(grammar_rules_useless_report): ... this since it is used for either
kind of useless rule.
* src/gram.h: Reword comments and update function names in prototypes.
* src/main.c (main): Say "rule useless in parser due to conflicts".
* src/print-xml.c (print_rules_never_reduced): Rename to...
(print_rules_useless_in_parser): ... this, and rename output XML
element "rules-never-reduced" to "rules-useless-in-parser".
(print_xml): Update for rename.
* src/print.c (print_results): Say "Rules useless in parser due to
conflicts".
* src/reduce.c (reduce_grammar_tables): Say "rule useless in grammar".
(nonterminals_reduce): Say "nonterminal useless in grammar".
(reduce_output): Say "Nonterminals useless in grammar".
Say "Rules useless in grammar".
(reduce_xml): Rename output XML element "useless" to
"useless-in-grammar".
(reduce_print): Don't report the count of grammatically useless rules
as "rules never reduced" just because %yacc is specified.
In the correct report of this count, say nonterminal(s) and rule(s)
"useless in grammar".
* tests/conflicts.at (S/R in initial): Update expected output.
(Defaulted Conflicted Reduction): Likewise.
(Unreachable States After Conflict Resolution): Likewise.
* tests/existing.at (GNU pic Grammar): Likewise.
* tests/reduce.at (Useless Nonterminals): Likewise.
(Useless Rules): Likewise.
(Reduced Automaton): Likewise.
(Underivable Rules): Likewise.
(Empty Language): Likewise.
Joel E. Denny [Sat, 10 Nov 2007 01:36:54 +0000 (01:36 +0000)]
* data/bison.m4 (b4_cat): Put a newline after the end delimiter of the
here document and before the EOF so that BSD's implementation of Bourne
shell doesn't parse the delimiter as part of the here document.
* doc/.cvsignore: Add cross-options.texi.
* src/getargs.c (usage): Add a blank line after the warning categories.
Akim Demaille [Mon, 5 Nov 2007 16:10:09 +0000 (16:10 +0000)]
Remove Id: from bison.1.
* doc/Makefile.am (remove_time_stamp): Include the sed invocation.
(perl -0777 -pi -e 's/.PPnId): New.
(.x.1): Use it to ignore the version control revision.
Akim Demaille [Sun, 4 Nov 2007 21:13:21 +0000 (21:13 +0000)]
Generate bison.1 using help2man.
* doc/common.x, doc/bison.x: New.
* doc/Makefile.am (bison.1, .x.1): New.
The code is taken from autoconf-2.61/man/Makefile.am.
* configure.ac: Look for help2man.
Joel E. Denny [Mon, 29 Oct 2007 17:36:40 +0000 (17:36 +0000)]
Deprecate %pure-parser and add `%define api.pure'. Discussed starting
at
<http://lists.gnu.org/archive/html/bison-patches/2007-09/msg00006.html>.
* NEWS (2.3a+): Mention.
* data/bison.m4 (b4_pure_if): Don't define it here.
* data/c.m4 (b4_identification): Depend on individual skeletons to
define b4_pure_flag, b4_push_flag, or b4_pull_flag if they use the
values of the %define variables api.pure or api.push_pull. Define
YYPURE, YYPUSH, and YYPULL accordingly.
* data/glr.c: Define b4_pure_if based on `%define api.pure' unless
glr.cc has already defined b4_pure_flag.
* data/push.c: Define b4_pure_if based on `%define api.pure'.
Remove YYPUSH and YYPULL since they're back in b4_identification again.
* data/yacc.c Define b4_pure_if based on `%define api.pure'.
* doc/bison.texinfo (Pure Decl): Update.
(Push Decl): Update.
(Decl Summary): Add api.pure to %define entry.
In %pure-parser entry, say it's deprecated and reference %define.
(Pure Calling): Update.
(Error Reporting): Update.
(C++ Scanner Interface): Update.
(How Can I Reset the Parser): Update.
(Table of Symbols): In %pure-parser entry, say it's deprecated and
reference %define.
* src/getargs.c (pure_parser): Remove global variable.
* src/getargs.h (pure_parser): Remove extern.
* src/output.c (prepare): Don't define pure_flag muscle.
* src/parse-gram.y (prologue_declaration): Implement %pure-parser as a
wrapper around `%define api.pure'.
* tests/calc.at (Simple LALR Calculator): Update.
(Simple GLR Calculator): Update.
* tests/cxx-type.at (GLR: Resolve ambiguity, pure, no locations):
Update.
(GLR: Resolve ambiguity, pure, locations): Update.
(GLR: Merge conflicting parses, pure, no locations): Update.
(GLR: Merge conflicting parses, pure, locations): Update.
* tests/glr-regression.at (Uninitialized location when reporting
ambiguity): Update
* tests/input.at (Unused %define api.pure): New test case.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Update definition for
AT_PURE_IF and AT_PURE_AND_LOC_IF.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update.
Joel E. Denny [Sun, 28 Oct 2007 00:24:22 +0000 (00:24 +0000)]
For the XML output's terminal element, rename @number to @token-number,
and add @symbol-number. In the nonterminal element, rename @number to
@symbol-number. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-10/msg00040.html>.
* data/xslt/xml2text.xsl (xsl:template match="terminal"): Update for
renames.
(xsl:template match="nonterminal"): Likewise.
* data/xslt/xml2xhtml.xsl (xsl:template match="terminal"): Likewise.
(xsl:template match="nonterminal"): Likewise.
* src/print-xml.c (print_grammar): Implement.
Joel E. Denny [Sun, 21 Oct 2007 15:34:08 +0000 (15:34 +0000)]
* data/xslt/xml2dot.xsl (xsl:template match="automaton/state"): After
2007-10-11 change, the child elements here are items not rules.
(<xsl:template match="item"): New.
(xsl:template match="rule"): Update for new reduced itemset.
(xsl:template match="point"): Remove.
(xsl:template match="empty"): For consistency with --graph, don't
output "/* empty */".
* data/xslt/xml2text.xsl (xsl:template match="terminal"): When invoking
line-wrap, don't pass a negative value as first-line-length since this
won't work with the following changes.
(xsl:template name="line-wrap"): Simplify slightly.
(xsl:template name="ws-search"): Eliminate recursion.
* src/print_graph.c (print_core): Don't print a reduction's lookahead
set next to an item whose dot is not at the end of the RHS even if it
happens to be associated with the same rule.
Joel E. Denny [Fri, 19 Oct 2007 06:14:44 +0000 (06:14 +0000)]
Add %define lr.keep_unreachable_states.
* NEWS (2.3a+): Mention it in the entry for unreachable state removal.
* doc/bison.texinfo (Decl Summary): Mention it in the %define entry.
* src/main.c (main): Implement it.
* tests/conflicts.at (Unreachable States After Conflict Resolution):
Extend to test it, and fix a typo.
Joel E. Denny [Fri, 19 Oct 2007 02:46:21 +0000 (02:46 +0000)]
* NEWS: Add entry for recent .output file lookahead set fix.
* doc/bison.texinfo (Understanding): Remove a bogus lookahead set in
the example .output text.
* tests/regression.at (Extra lookahead sets in report): Improve wording
of comments.
Wojciech Polak [Wed, 17 Oct 2007 18:13:53 +0000 (18:13 +0000)]
2007-10-17 Wojciech Polak <polak@gnu.org>
* src/print-xml.c (print_grammar): Renamed
<terminal> and <nonterminal> attributes:
"type" to "number" and "symbol" to "name".
* data/xslt/xml2text.xsl (xsl:template match="terminal"):
Use new attribute names.
(xsl:template match="nonterminal"): Likewise.
* data/xslt/xml2xhtml.xsl: Likewise.
* src/print-xml.c (print_core): Don't print a reduction's lookahead set
next to an item whose dot is not at the end of the RHS even if it
happens to be associated with the same rule.
* src/print.c (print_core): Likewise.
* tests/conflicts.at (Unresolved SR Conflicts): Update output.
(Resolved SR Conflicts): Update output.
* tests/regression.at (Extra lookahead sets in report): New test case.
Joel E. Denny [Tue, 9 Oct 2007 08:48:43 +0000 (08:48 +0000)]
Make xml2dot.xsl and --graph produce the same output.
* data/xslt/xml2dot.xsl (xsl:template match="rule"): Use a ` '
instead of a `\n'. That is, don't add escapes yet or they'll be doubly
escaped later.
(xsl:template name="output-node"): Use the new escape template instead
of the string-replace template directly.
(xsl:template name="output-edge"): Likewise.
(xsl:template name="escape"): New, escapes backslashes and newlines in
addition to quotation marks.
* src/graphviz.c (start_graph, output_node, output_edge): Add
whitespace to output for legibility.
Make xml2text.xsl and --report produce the same output, and remove the
XML "conflicts" element since a conflict summary is easily extracted
from the automaton.
* data/xslt/bison.xsl: New.
(xsl:template match="state" mode="bison:count-conflicts): New.
* data/xslt/xml2text.xsl: Import bison.xsl.
(xsl:template match="bison-xml-report"): Instead of styling the
"conflicts" element, style the "automaton" element with mode
"conflicts". Unlike the former, the latter lists S/R and R/R
conflicts for a state on the same line.
(xsl:template match="conflicts"): Remove.
(xsl:template match="conflict"): Remove.
(xsl:template match="terminal"): Line-wrap the list of rules in which
the terminal is used.
(xsl:template match="nonterminal"): Likewise for nonterminals.
(xsl:template match="automaton" mode="conflicts"): New.
(xsl:template match="state" mode="conflicts"): New.
(xsl:template name="line-wrap"): New.
(xsl:template name="ws-search"): New.
* data/xslt/xml2xhtml.xsl: Import bison.xsl.
(xsl:template match="bison-xml-report"): Instead of styling the
"conflicts" element, style the "automaton" element with mode
"conflicts."
(xsl:template match="conflicts"): Remove.
(xsl:template match="conflict"): Remove.
(xsl:template match="automaton" mode="conflicts"): New.
(xsl:template match="state" mode="conflicts): New.
* src/conflicts.c (conflicts_output_xml): Remove.
* src/conflicts.h (conflicts_output_xml): Remove prototype.
* src/print-xml.c (print_xml): Don't invoke conflicts_output_xml.
* src/print.c (print_grammar): Consistently wrap at the 66th column so
the corresponding XSLT is easier. Also, never wrap between a word and
the comma that follows it.
Joel E. Denny [Mon, 8 Oct 2007 10:09:07 +0000 (10:09 +0000)]
Improve C++ namespace support. Discussed starting at
<http://lists.gnu.org/archive/html/help-bison/2007-09/msg00016.html>.
* data/c++.m4: (b4_namespace_ref, b4_namespace_open,
b4_namespace_close): New macros that interpret the %define variable
"namespace" so its value can contain "::" to indicate nested
namespaces.
* data/glr.cc (b4_namespace): Don't define, and replace all uses with
the above macros.
* data/lalr1.cc (b4_namespace): Likewise.
* data/location.cc (b4_namespace): Likewise.
* doc/bison.texinfo (Decl Summary): Move `%define push_pull' entry
inside a new table in the general %define entry. Document `%define
namespace' there as well. Point the %name-prefix entry to it since it
explains it more completely in the case of C++.
(C++ Bison Interface): Mention `%define namespace' instead of
%name-prefix.
(Table of Symbols): Remove the `%define push_pull' entry. The %define
entry suffices.
* tests/c++.at (Relative namespace references): New test case.
(Absolute namespace references): New test case.
(Syntactically invalid namespace references): New test case.
* tests/input.at (C++ namespace reference errors): New test case.
Joel E. Denny [Mon, 8 Oct 2007 04:00:13 +0000 (04:00 +0000)]
Add syncline support and location accessor to internal %define
interfaces.
* data/bison.m4 (b4_percent_define_get_loc): New.
(b4_percent_define_get_syncline): New.
(b4_percent_define_flag_if): Use b4_percent_define_get_loc.
(b4_percent_define_default): Record defining location as line 1 rather
than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(b4_percent_define_check_values): Use b4_percent_define_get_loc.
* src/muscle_tab.c (muscle_syncline_grow): New.
(muscle_code_grow): Use muscle_syncline_grow.
(muscle_percent_define_insert): Use muscle_percent_define_get_loc, and
define b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_get_loc): New.
(muscle_percent_define_get_syncline): New.
(muscle_percent_define_flag_if): Use muscle_percent_define_get_loc, and
remove some unused variables.
(muscle_percent_define_default): Record defining location as line 1
rather than 0 for the sake of synchronizing #line's, and define
b4_percent_define_syncline(VARIABLE).
(muscle_percent_define_check_values): Use
muscle_percent_define_get_loc.
* src/muscle_tab.h (muscle_percent_define_get_loc): Prototype.
(muscle_percent_define_get_syncline): Prototype.
* tests/skeletons.at (%define Boolean variables: invalid skeleton
defaults): Update output for location change.
(Complaining during macro argument expansion): Extend to test
b4_percent_define_get_loc and b4_percent_define_get_syncline errors.
Joel E. Denny [Mon, 8 Oct 2007 01:53:08 +0000 (01:53 +0000)]
Fix some error-reporting macro bugs.
* data/bison.m4 (b4_cat): New.
(b4_error, b4_error_at): Use b4_cat to send error directives directly
to stdout so they don't become arguments to other macros. Update
comments and add examples.
(b4_warn, b4_warn_at, b4_complain, b4_complain_at): Update comments and
add examples.
(b4_fatal, b4_fatal_at): Likewise, and invoke m4_exit(1) immediately
after printing the error directive so that M4 doesn't report subsequent
problems that are induced by this problem.
* src/scan-skel.l: Recognize @` digraph outside of directive arguments
instead of just in them. Recognize @\n in both places. Both expand to
the empty string. Needed by b4_cat.
* tests/skeletons.at (Complaining during macro argument expansion):
New test case.
(Fatal errors make M4 exit immediately): New test case.
Joel E. Denny [Fri, 5 Oct 2007 02:54:33 +0000 (02:54 +0000)]
Implement --print-datadir.
* src/getargs.c (usage): Mention.
(PRINT_DATADIR_OPTION): New anonymous enum member.
(long_options): Add entry for it.
(getargs): Add case for it calling compute_pkgdatadir.
* src/output.c (output_skeleton): Encapsulate data directory
computation from here...
(prepare): ... and from here...
(compute_pkgdatadir): ... into this new function.
* src/output.h (compute_pkgdatadir): Prototype.
Joel E. Denny [Sat, 29 Sep 2007 22:36:38 +0000 (22:36 +0000)]
* src/print-xml.c (escape_bufs): New static global variable
replacing...
(xml_escape_n): ... the static local variable buf here.
(print_xml): Free memory for escape_bufs.
* src/reduce.c (reduce_xml): XML-escape terminal symbol tags.
Joel E. Denny [Tue, 25 Sep 2007 05:47:27 +0000 (05:47 +0000)]
Replace `%push-parser' and `%push-pull-parser' with
`%define push_pull "push"' and `%define push_pull "both"'.
`%define push_pull "pull"' is the default.
* doc/bison.texinfo (Push Decl, Push Parser Function,
Pull Parser Function, Parser Create Function, Parser Delete Function):
Update declarations.
(Decl Summary, Table of Symbols): Replace %push-parser and
%push-pull-parser entries with a %define push_pull entry.
* data/bison.m4 (b4_percent_define_check_values): New macro.
(b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these
definitions...
* data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp
definitions...
* data/push.c: ... to here and compute them from the value of the
%define variable push_pull.
* data/c-skel.m4: Instead of choosing the push.c skeleton for push
parsing requests here...
* data/yacc.c: ... hack this to switch to push.c any time
b4_use_push_pull_flag or the %define variable push_pull is set. This
will go away when we mv push.c yacc.c.
* data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that
push parsing is not supported since unused %define variables are
reported anyway.
* src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove.
* src/muscle_tab.h (muscle_percent_define_check_values): Update
comments for consistency with b4_percent_define_check_values.
* src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag
muscles.
* src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER):
Remove.
(prologue_declaration): Remove %push-parser and %push-pull-parser
rules.
* src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules.
* tests/calc.at: Update declarations.
* tests/input.at (%define enum variables): New test case.
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update
declaration.
(Push Parsing: Multiple impure instances): Update declaration.
(Push Parsing: Unsupported Skeletons): New test case.
* tests/torture.at (Exploding the Stack Size with Alloca): Update
declaration.
(Exploding the Stack Size with Malloc): Update declaration.
Paul Eggert [Mon, 24 Sep 2007 06:34:44 +0000 (06:34 +0000)]
* src/conflicts.c (log_resolution): Fix indenting bugs I introduced.
Problem reported by Wojciech Polak.
* src/print-xml.c (xml_puts): Work even if LEVEL exceeds INT_MAX/2.
(xml_printf): Undo change I made on 21 September; that is,
indent 2 spaces, not 1.
Paul Eggert [Fri, 21 Sep 2007 22:53:58 +0000 (22:53 +0000)]
* src/gram.c (rule_rhs_print_xml): Now static, since it isn't used
elsewhere.
* src/print-xml.c: Prefer "const" after types; that's more consistent.
(xml_printf): Indent just 1 space for level.
(e_char, xlate_char): Remove.
(xml_escape_string): Rewrite to avoid undefined behavior (used
storage that was freed from the stack).
(xml_escape_n): Don't bother checking for subscript error.
2007-09-21 Wojciech Polak <polak@gnu.org>
Add support for an -x option to generate an XML report.
It is not documented yet.
* src/print-xml.c: New file.
* src/print-xml.h: Likewise.
* lib/timevar.def (TV_XML): New var.
* src/Makefile.am (bison_SOURCES): Add print-xml.c, print-xml.h.
* src/conflicts.c: Include print-xml.h.
(solved_conflicts_xml_obstack): New var.
(log_resolution, conflicts_solve, conflicts_free):
Add support for XML report.
(conflicts_output_val): New function.
* src/conflicts.h (conflicts_output_val): New decl.
* src/files.c (spec_xml_file): New var.
(compute_output_file_names, output_file_names_free): Add XML support.
* src/files.h (spec_xml_file): New decl.
* src/getargs.c (xml_flag): New var.
(usage, short_options, long_options, getargs): Add XML support.
* src/getargs.h (xml_flag): New decl.
* src/gram.c: Include print-xml.h.
(rule_lhs_print_xml, rule_rhs_print_xml):
(grammar_rules_partial_print_xml, grammar_rules_print_xml):
New functions.
* src/gram.h: Declare external ones.
* src/main.c: Include print-xml.h.
(main): Add XML support.
* src/reduce.c: Include print-xml.h.
(reduce_xml): New function.
* src/reduce.h: Declare it.
* src/state.c: Include print-xml.h.
(state_new): Add XML support.
(state_rule_lookahead_tokens_print_xml): New function.
* src/state.h: Declare it.
(struct state): New member solved_conflicts_xml.
* src/symtab.c (symbol_class_get_string): New function.
* src/symtab.h: Declare it.
Joel E. Denny [Sat, 18 Aug 2007 00:45:52 +0000 (00:45 +0000)]
In impure push mode, don't allow more than one yypstate to be allocated
since multiple impure parsers would corrupt yynerrs.
* data/push.c (yypstate_allocated): New static global variable
initialized to 0.
(yypull_parse): If yypstate_new returns 0, don't report it as memory
exhaustion if yypstate_allocated is 1, but still return 2.
(yypstate_new): Invoke yyerror and return 0 if yypstate_allocated is
already 1. Otherwise, set it to 1.
(yypstate_delete): Set it to 0.
* tests/push.at (Push Parsing: Multiple impure instances): New test
case.
Joel E. Denny [Sat, 11 Aug 2007 23:08:04 +0000 (23:08 +0000)]
* tests/push.at (Push Parsing: Memory Leak for Early Deletion): Do not
name user variables starting with `yy'. Just pass NULL instead of a
dummy local &yylval to yypush_parse.
* tests/torture.at (AT_DATA_STACK_TORTURE): Do not name user variables
starting with `yy'.
Joel E. Denny [Fri, 3 Aug 2007 04:51:23 +0000 (04:51 +0000)]
* data/yacc.c (yyexhaustedlab): Define it when YYERROR_VERBOSE is
true since it's then always used regardless of whether yyoverflow is
defined. Reported by Christian Burger at
<http://lists.gnu.org/archive/html/bug-bison/2007-07/msg00031.html>.
* THANKS: Add Christian Burger.
Joel E. Denny [Sun, 29 Jul 2007 01:17:40 +0000 (01:17 +0000)]
* src/muscle_tab.c (muscle_percent_define_flag_if): In order to
determine whether this function has already complained about an invalid
value for a %define boolean variable, don't check whether Bison has
ever examined the value. As written, the check was a tautology.
Instead, record and check for this complaint using a separate muscle.
Joel E. Denny [Sat, 28 Jul 2007 04:27:32 +0000 (04:27 +0000)]
Fix push parsing memory leak reported by Brandon Lucia at
<http://lists.gnu.org/archive/html/bug-bison/2007-07/msg00032.html>.
* THANKS: Add Brandon Lucia.
* data/push.c (yypstate_delete): Free the stack if it was reallocated
but the parse never completed and thus freed it.
* tests/Makefile.am (TESTSUITE_AT): Add push.at.
* tests/testsuite.at: Include push.at.
* test/push.at: New.
(Push Parsing: Memory Leak for Early Deletion): New test case.
Joel E. Denny [Tue, 17 Jul 2007 06:56:36 +0000 (06:56 +0000)]
Improve handling of multiple S/R conflicts in the same state and of S/R
conflicts involving multiple reductions.
* src/conflicts.c (resolve_sr_conflict): Don't assign the error action
set for a state here or Bison will abort if it is reassigned on a
later conflicted reduction in the same state.
Similarly, don't finalize and assign the solved conflicts report here
or it will be lost if it is reassigned on a later conflicted reduction
in the same state.
(set_conflicts): Instead, assign them both here after all S/R conflicts
in the state have been fully examined.
* src/print.c (shift_set): Rename to...
(no_reduce_set): ... this.
(print_reductions): Update for rename, and add %nonassoc error action
tokens to no_reduce_set so that, when printing the first remaining
reduction on an error action token, the reduction is enclosed in
brackets.
(print_results): Update for rename.
* tests/conflicts.at (Solved conflicts report for multiple reductions
in a state): New test case.
(%nonassoc error actions for multiple reductions in a state): New test
case.
* src/main.c (main): Don't depend on C99 features.
Joel E. Denny [Tue, 10 Jul 2007 02:57:31 +0000 (02:57 +0000)]
* LR0.c (new_itemsets): Fix wording in comments: say item index rather
than item number.
* closure.c (closure): Likewise.
* state.h (reductions): Comment sorting of rules.
(state): Comment sorting of items.
Joel E. Denny [Tue, 3 Jul 2007 14:08:29 +0000 (14:08 +0000)]
Fix C++ test cases after recent Gnulib changes. Discussed starting at
<http://lists.gnu.org/archive/html/bug-bison/2007-07/msg00000.html>.
* examples/calc++/Makefile.am (DEFAULT_INCLUDES): Override Automake's
definition in order to avoid Gnulib headers since we don't use config.h
here.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): Use AT_DATA_GRAMMAR
rather than AT_DATA so that config.h is included.
Joel E. Denny [Mon, 2 Jul 2007 02:07:20 +0000 (02:07 +0000)]
* data/glr.c (yy_yypstack, yypstates, yypdumpstack): Use YYFPRINTF
instead of fprintf. Guard these functions with #if YYDEBUG instead of
#ifdef YYDEBUG for consistency with all other uses of YYDEBUG in Bison
and so that YYFPRINTF is guaranteed to be defined here.
Joel E. Denny [Tue, 29 May 2007 04:24:17 +0000 (04:24 +0000)]
Improve some comments in parser table construction.
* src/LR0.c (new_itemsets): Explain sorting of itemset and kernel_base.
(generate_states): Don't mention ruleset, which is internal to closure.
* src/closure.c (closure): Explain sorting of core and itemset, which
is required for this function to behave correctly.
* src/closure.h (closure): Mention sorting.
Joel E. Denny [Tue, 29 May 2007 03:06:34 +0000 (03:06 +0000)]
* src/muscle_tab.c (muscle_percent_define_invalid_value): Replace
with...
(muscle_percent_define_check_values): ... this more helpful function.
Again, it's not used yet, but it will be.
* src/muscle_tab.h: Likewise.
Joel E. Denny [Mon, 28 May 2007 04:14:18 +0000 (04:14 +0000)]
* src/lalr.c (state_lookahead_tokens_count): For code readability,
move the check for disabled transitions to an aver since conflict
resolution hasn't happened yet.
* src/lalr.c (state_lookahead_tokens_count): Remove the check that
labels a state as inconsistent just because it has error transitions.
The original form of this check appeared in revision 1.1 of lalr.c,
which was committed on 1991-12-21. Now (at least), changing the
consistency label on such a state appears to have no useful effect in
any of the places it is examined, which I enumerate below. The key
point to understanding each item in this enumeration is that a state
with an error transition is labelled consistent in the first place only
if it has no rules, so the check cannot matter for states that have
rules. (1) Labelling a state as inconsistent will cause set_conflicts
to try to identify its conflicts, and a state must have *rules* to have
conflicts. (2) Labelling a state as inconsistent will affect how
action_row sets the default *rule* for the state. (3) Labelling a
state as inconsistent will cause build_relations to add lookback edges
to *rules* in that state.
* src/state.h (struct state): Word the comment for member consistent
more carefully.
Don't widen struct state with member reachable just to temporarily
record reachability. Instead, use a local bitset.
* src/state.h (struct state): Remove member.
* src/state.c (state_new): Don't initialize it.
(state_mark_reachable_states): Rename to...
(state_record_reachable_states): ... this, and use bitset.
(state_remove_unreachable_states): Use bitset.
Joel E. Denny [Sat, 26 May 2007 20:08:18 +0000 (20:08 +0000)]
* NEWS (2.3a+): In the %code entry, reference section `Bison
Declaration Summary' from the manual now since the %code summary has
moved there.
* doc/bison.texinfo (Prologue Alternatives): Mention that directives
in the rules section must be terminated by semicolons.
Joel E. Denny [Sat, 26 May 2007 19:10:43 +0000 (19:10 +0000)]
* data/glr.c (yylval): As in yacc.c, don't extern in the header for
the case of pure parsers. Reported by Frans Englich at
<http://lists.gnu.org/archive/html/help-bison/2007-05/msg00018.html>.
* THANKS: Add Frans Englich.
Joel E. Denny [Sat, 26 May 2007 18:19:34 +0000 (18:19 +0000)]
* src/Makefile.am (yacc): Quote target action commands properly so
that the yacc script isn't corrupt. Reported by Hans Aberg at
<http://lists.gnu.org/archive/html/bug-bison/2007-05/msg00003.html>.
Joel E. Denny [Sun, 20 May 2007 05:01:53 +0000 (05:01 +0000)]
Extend the front-end API for %define variables to more completely
mirror the back-end. This will be useful in the future.
* data/bison.m4 (b4_percent_define_get, b4_percent_define_ifdef):
Update comments to mention the new front-end counterparts of these
macros.
* src/muscle_tab.c (MUSCLE_COMMON_DECODE): New macro with common code
for muscle_string_decode and muscle_location_decode.
(muscle_string_decode): New static function.
(muscle_location_decode): Use MUSCLE_COMMON_DECODE.
(muscle_percent_define_get, muscle_percent_define_ifdef): New
functions.
(muscle_percent_define_flag_if): Use muscle_percent_define_ifdef and
muscle_percent_define_get to mimic the b4_percent_define_flag_if
implementation more closely.
(muscle_percent_define_invalid_value): New function.
* src/muscle_tab.h (muscle_percent_define_get,
muscle_percent_define_ifdef, muscle_percent_define_invalid_value):
Prototype.
Joel E. Denny [Mon, 7 May 2007 02:56:56 +0000 (02:56 +0000)]
If conflict resolution makes states unreachable, remove those states,
report rules that are then unused, and don't report conflicts in those
states.
* src/conflicts.c, src/conflicts.h (conflicts_update_state_numbers):
New global function.
* src/lalr.c, src/lalr.h (lalr_update_state_numbers): New global
function.
* src/main.c (main): After conflict resolution, remove the unreachable
states and update all data structures that reference states by number.
* src/state.c (state_new): Initialize each state's reachable member to
false.
(state_mark_reachable_states): New static function.
(state_remove_unreachable_states): New global function.
* src/state.h (struct state): Add member bool reachable.
(state_remove_unreachable_states): Prototype.
* tests/conflicts.at (Unreachable States After Conflict Resolution):
New test case.
* tests/existing.at (GNU pic Grammar): Update test case output now that
an unused rule is discovered.
Joel E. Denny [Mon, 7 May 2007 02:28:42 +0000 (02:28 +0000)]
Minor code cleanup in parser table construction.
* src/LR0.c (new_itemsets): Use item_number_is_symbol_number.
(new_itemsets, save_reductions): Update for rename to nitemset.
* src/closure.c (nritemset): Rename to...
(nitemset): ... this since the "r" appears to meaningless and isn't
used in the comments.
(closure): Update for rename.
* src/closure.h (nritemset): Update extern to...
(nitemset): ... this.
* src/lalr.c (LA): Fix a typo in comments.
* src/print.c (print_core): Update for rename to nitemset.
* src/print_graph.c (print_graph): Likewise.
* src/state.h: Fix some typos in header comments.
projects / bison.git / log
