DJGPP spefic issue. Inhibit the use of disallowed characters for
file name genertion on Win98, WinXP, etc. These are |<>":?*and concern testsuite case 46.
* Makefile.am: djgpp/testsuite.sed added to EXTRA_DIST
* djgpp/testsuite.sed: Inhibit the use of disallowed characters.
* djgpp/config.bat: Inhibit the use of disallowed characters.
Joel E. Denny [Fri, 2 Mar 2007 06:26:28 +0000 (06:26 +0000)]
Miscellaneous %define and %code cleanup.
* data/bison.m4 (b4_percent_define_flag_if): Correct comments on how
values are interpreted.
* doc/bison.texinfo (Decl Summary): Clean up and extend %define
documentation a little more.
* src/muscle_tab.c (MUSCLE_USER_NAME_CONVERT,
muscle_percent_define_insert, muscle_percent_code_grow): New
functions/macros.
* src/muscle_tab.h (muscle_percent_define_insert,
muscle_percent_code_grow): Prototype.
* src/parse-gram.y (prologue_declaration): Use
muscle_percent_define_insert and muscle_percent_code_grow when parsing
%define and %code directives.
Make it easy to share %define boolean variables between the front-end
and back-end. Though not used yet, this will be useful in the future.
* data/bison.m4 (b4_check_user_names): Rewrite comments to talk about
Bison uses of names rather than just skeleton uses of names.
(b4_percent_define_get, b4_percent_define_ifdef): Rename
b4_percent_define_skeleton_variables(VARIABLE) to
b4_percent_define_bison_variables(VARIABLE).
(b4_percent_code_get, b4_percent_code_ifdef): Rename
b4_percent_code_skeleton_qualifiers(QUALIFIER) to
b4_percent_code_bison_qualifiers(QUALIFIER).
(b4_check_user_names_wrap): Update for renames.
* src/muscle_tab.c, src/muscle_tab.h (muscle_percent_define_flag_if,
muscle_percent_define_default): New functions mimicking
b4_percent_define_flag_if and b4_percent_define_default.
For %define variables, report locations for invalid values and
redefinitions.
* data/bison.m4 (b4_percent_define_flag_if): Read
b4_percent_define_loc(VARIABLE) to report the location of an invalid
value for VARIABLE.
(b4_percent_define_default): Save a special location in
b4_percent_define_loc(VARIABLE) in case the default value for VARIABLE
must later be reported as invalid.
* src/muscle_tab.c (muscle_location_grow, muscle_location_decode): New
functions.
(muscle_percent_define_insert): Record the location of VARIABLE in
muscle percent_define_loc(VARIABLE), and use it to report the previous
location for a redefinition.
(muscle_percent_define_flag_if): Update like b4_percent_define_flag_if.
(muscle_percent_define_default): Update like b4_percent_define_default.
(muscle_grow_user_name_list): Rename to...
(muscle_user_name_list_grow): ... this for consistency and use
muscle_location_grow.
* src/muscle_tab.h (muscle_location_grow): Prototype.
* tests/input.at (%define errors): Update expected output.
* tests/skeletons.at (%define boolean variables: invalid skeleton
defaults): New test case.
Joel E. Denny [Thu, 1 Mar 2007 03:40:18 +0000 (03:40 +0000)]
* src/print.c (lookahead_set, state_default_rule): Remove.
(print_reductions): Replace state_default_rule invocation with
equivalent use of yydefact, which was computed in token_actions in
tables.c.
(print_results): Don't allocate lookahead_set.
Joel E. Denny [Sat, 24 Feb 2007 05:43:35 +0000 (05:43 +0000)]
Use YYFPRINTF instead of fprintf where appropriate. Reported by
Sébastien Fricker at
<http://lists.gnu.org/archive/html/bug-bison/2007-02/msg00035.html>.
* THANKS: Add Sébastien Fricker.
* data/glr.c, data/push.c, data/yacc.c (yy_reduce_print): Implement.
* doc/bison.texinfo (Tracing): Make it clearer that YYFPRINTF must
accept a variable number of arguments.
Paul Eggert [Mon, 12 Feb 2007 06:11:39 +0000 (06:11 +0000)]
Undo my 2007-02-07 change, switching back to the c-strcase module
introduced in the 2007-02-03 change. Bruno Haible reported that
the 2007-02-07 change would be dangerous in Turkish if we add a
language whose name contains "i", since "i" is not lowercase "I"
in Turkish.
* bootstrap.conf (gnulib_modules): Add c-strcase. Remove strcase.
* lib/.cvsignore: Add c-ctype.c, c-ctype.h, c-strcase.h,
c-strcasecomp.c, c-strncasecmp.c. Remove strcasecmp.c, strncasecmp.c.
* m4/.cvsignore: Remove strcase.m4.
* src/getargs.c: Revert 2007-02-07 change, as follows.
Include c-strcase.h.
(language_argmatch): Use c_strcasecmp rather than strcasecmp.
Joel E. Denny [Sun, 11 Feb 2007 18:44:57 +0000 (18:44 +0000)]
Enable the Java related testsuite tests when the only Java compiler
found is a gcj < 4.3. Discussed at
<http://lists.gnu.org/archive/html/bug-bison/2007-02/msg00016.html>.
* configure.ac (gt_JAVACOMP): Don't specify a target_version.
Joel E. Denny [Sun, 11 Feb 2007 07:34:26 +0000 (07:34 +0000)]
* data/Makefile.am: Update copyright date.
* data/push.c (yypull_parse): Report memory exhaustion and return 2 if
yypstate_new returns NULL.
(yypstate_new): Return NULL if malloc does.
* src/reader.c (packgram): Move translation of rule actions from the
beginning of packgram to...
(check_and_convert_grammar): ... here right before packgram is invoked
so it's easier to write more complete comments, and remove redundant
code.
Joel E. Denny [Sat, 10 Feb 2007 22:28:23 +0000 (22:28 +0000)]
As in semantic actions, make @$ in %initial-action, %destructor, and
%printer imply %locations.
* src/scan-code.l (SC_SYMBOL_ACTION): Set locations_flag = true when
scanning @$.
* tests/actions.at (AT_CHECK_ACTION_LOCATIONS): New macro supporting...
(@$ in %initial-action implies %locations,
@$ in %destructor implies %locations,
@$ in %printer implies %locations): ... these new test cases.
Paul Eggert [Wed, 7 Feb 2007 20:37:29 +0000 (20:37 +0000)]
Undo most of the 2007-02-03 change, switching to the strcase module
now that gnulib strcase has been fixed.
* bootstrap.conf (gnulib_modules): Remove c-strcase. Add strcase.
* lib/.cvsignore: Remove c-ctype.c, c-ctype.h, c-strcase.h,
c-strcasecomp.c, c-strncasecmp.c. Add strcasecmp.c, strncasecmp.c
* m4/.cvsignore: Add strcase.m4.
* src/getargs.c: Revert 2007-02-03 change, as follows.
Don't include c-strcase.h.
(language_argmatch): Use strcasecmp rather than c_strcasecmp.
strcasecmp has "unspecified behavior" outside the POSIX locale,
but it works fine in practice if at least one argument is ASCII,
as is the case in Bison.
Paolo Bonzini [Mon, 5 Feb 2007 09:58:04 +0000 (09:58 +0000)]
2007-02-05 Paolo Bonzini <bonzini@gnu.org>
* data/lalr1.java (Stack): Work around old verifiers that disallow
access to the private fields of an inner class, from the outer class.
We can make Stack's fields public because user code doesn't have access
to the instance of Stack used by parse().
Paul Eggert [Sun, 4 Feb 2007 07:19:10 +0000 (07:19 +0000)]
* .cvsignore: Add javacomp.sh, javaexec.sh. Is this really
the right spot for these files?
* bootstrap.conf (gnulib_modules): Add c-strcase.
* lib/.cvsignore: Add c-ctype.c c-ctype.h, c-strcasecomp.c,
c-strncasecmp.c.
* src/getargs.c: Include c-strcase.h.
(language_argmatch): Use c_strcasecmp rather than strcasecmp,
to avoid unspecified behavior.
Paolo Bonzini [Tue, 30 Jan 2007 08:01:29 +0000 (08:01 +0000)]
2007-01-30 Paolo Bonzini <bonzini@gnu.org>
* data/bison.m4 (b4_percent_define_flag_if): Don't treat 0 as false.
Complain if the value does not match empty, "true" or "false".
* data/c++.m4: Adjust default definitions of %define variables.
* data/java.m4: Adjust default definitions of %define variables.
* doc/bison.texinfo (Decl Summary): Adjust the %define entry according
to above behavior.
* tests/input.at (Boolean %define variables): Test new behavior.
Paolo Bonzini [Mon, 29 Jan 2007 10:54:42 +0000 (10:54 +0000)]
2007-01-29 Paolo Bonzini <bonzini@gnu.org>
* NEWS: Mention java.
* TODO: Remove things that are done.
* bootstrap.conf: Add javacomp-script and javaexec-script.
* configure.ac: Invoke gt_JAVACOMP and gt_JAVAEXEC.
Joel E. Denny [Sun, 28 Jan 2007 14:31:56 +0000 (14:31 +0000)]
Clean up.
* src/scan-skel.l (at_directive_perform): Add at_directive_argc and
at_directive_argv arguments so these no longer have to be global
variables. Also, update the implementation for the following changes.
(fail_for_at_directive_too_many_args,
fail_for_at_directive_too_few_args): Add at_directive_name argument.
(at_directive_name): Remove as at_directive_argv[0] will be used for
this now.
(AT_DIRECTIVE_ARGC_MAX): Increment to make space in at_directive_argv
for the directive name.
(at_directive_argc, at_directive_argv): Make these local within
skel_lex instead of global.
(INITIAL): Update directive start action for above changes.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and update for above changes.
(SC_AT_DIRECTIVE_SKIP_WS): Update.
(scan_skel): Move yylex_destroy to...
(skel_scanner_free): ... here.
* tests/skeletons.at (installed skeleton file name): Rename to...
(installed skeleton file names): ... this.
Joel E. Denny [Sat, 27 Jan 2007 23:34:16 +0000 (23:34 +0000)]
* ChangeLog: For changes in doc/bison.texinfo, consistently reference
node names: say "Table of Symbols" not "Bison Symbols", and say "Decl
Summary" not "Directives".
* doc/bison.texinfo (Decl Summary, Calc++ Parser): Cross-reference the
%code entry in "Decl Summary" rather than the one in "Table of Symbols"
since the former is now the more complete one.
(Prologue Alternatives): Likewise and do the same for %defines.
(Table of Symbols): Add summary of %code, add summary of %define, and
move full %code documentation to...
(Decl Summary): ... here for consistency with other entries in these
sections.
Move %define entry in order to keep this list alphabetized.
Reword %define entry a little to put less emphasis on the skeleton
concept, which most users shouldn't have to think about.
Joel E. Denny [Thu, 18 Jan 2007 05:14:59 +0000 (05:14 +0000)]
Implement @gettext<...@> directive to call gettext from skeletons. It
can be used anywhere including inside arguments of directives of the
form @foo(...@). Eventually, it should be possible to write an
xgettext-like utility to extract @gettext<...@> text from skeletons.
* data/bison.m4 (b4_check_user_names): Use @gettext<...@> when invoking
b4_warn_at since b4_warn_at doesn't invoke gettext anymore.
* data/glr.cc, data/lalr1.cc: Likewise but for b4_fatal and
b4_complain reporting a push-parsing request or a missing %defines.
* src/scan-skel.l (INITIAL): Recognize `@gettext<' to start...
(SC_AT_GETTEXT_ARG): ... this new start condition where gettext is
invoked.
(SC_AT_DIRECTIVE_ARG): Rename to...
(SC_AT_DIRECTIVE_ARGS): ... this, and recognize `@gettext<' to start
SC_AT_GETTEXT_ARG.
(at_directive_perform): Don't invoke gettext for @warn(...@),
@warn_at(...@), etc. Instead, let the skeletons decide what should be
passed to @gettext<...@>.
* tests/skeletons.at (@gettext<...@>): New test case.
Joel E. Denny [Thu, 18 Jan 2007 02:18:17 +0000 (02:18 +0000)]
Implement support for relative and absolute skeleton file names.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00071.html>.
* doc/bison.texinfo (Decl Summary): Document in %skeleton entry.
(Bison Options): Document in --skeleton entry.
* src/output.c (output_skeleton): Use strncpy rather than strcpy since
full_skeleton can't necessarily hold all of pkgdatadir.
If the specified skeleton file name contains a `/', don't prepend
pkgdatadir.
* src/parse-gram.y (prologue_declaration): If the specified skeleton
file name contains a `/', prepend the grammar file directory.
* tests/Makefile.am (TESTSUITE_AT): Add skeletons.at.
* skeletons.at: New file.
(relative skeleton file names): New test case.
(installed skeleton file names): New test case.
* tests/testsuite.at: Include skeletons.at.
Akim Demaille [Tue, 16 Jan 2007 13:11:30 +0000 (13:11 +0000)]
* doc/bison.texinfo (Calc++ Parsing Driver): Let "parse" return an
error code.
(Calc++ Scanner): Exit with failure if we can't open the input
file.
Accept "-" standing for stdin.
(Calc++ Top Level): Print the result only if the parsing was
successful.
Joel E. Denny [Tue, 16 Jan 2007 06:16:04 +0000 (06:16 +0000)]
Clean up %define and %code implementation in M4 some. Most
importantly, rename all related macros to be in the b4_percent_define
and b4_percent_code namespaces. Also, complete support for `.' in
%define variable names and %code qualifiers.
* data/bison.m4 (b4_check_user_names): Check for special
"SKELETON-NAMESPACE(name)" macros instead of using two nested
m4_foreach loops.
(b4_get_percent_define, b4_get_percent_code): Rename to...
(b4_percent_define_get, b4_percent_code_get): ... these.
Extend documentation with examples.
For SKELETON-NAMESPACE (as documented for b4_check_user_names), use
b4_percent_define_skeleton_variables and
b4_percent_code_skeleton_qualifiers.
Expect any value for the %define variable `foo' to be stored in the
macro named `b4_percent_define(foo)'; expect any %code blocks for the
qualifier `foo' to be stored in a macro named `b4_percent_code(foo)';
expect any unqualified %code blocks to be stored in a macro named
`b4_percent_code_unqualified'.
Use m4_indir so that %define variable names and %code qualifiers can
contain `.', which is allowed by the grammar parser.
(b4_percent_define_default): New macro to set a default value for a
%define variable.
(m4_wrap): Update wrapped code, and fix some underquoting.
(b4_check_user_names_wrap): Update and define outside the m4_wrap.
Expect grammar uses of %define variables and %code qualifiers to be
defined in b4_percent_define_user_variables and
b4_percent_code_user_qualifiers.
* data/c++.m4: Use b4_percent_define_default rather than
m4_define_default. Fix some underquoting. Skeleton usage of %define
variable define_location_comparison now implies skeleton usage of
%define variable filename_type.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Update macro names.
* src/parse-gram.y (prologue_declaration, grammar_declaration): Update
muscle names.
Joel E. Denny [Wed, 10 Jan 2007 03:47:50 +0000 (03:47 +0000)]
* tests/glr-regression.at: Use AT_PARSER_CHECK rather than AT_CHECK to
run parsers in all tests so that Valgrind is invoked during
maintainer-check-valgrind.
(Duplicate representation of merged trees): Free all semantic values.
(Duplicated user destructor for lookahead): Likewise.
Joel E. Denny [Wed, 10 Jan 2007 02:55:19 +0000 (02:55 +0000)]
* tests/local.at (AT_PARSER_CHECK): Add a PRE argument to specify a
command-line prefix.
* tests/torture.at (Exploding the Stack Size with Alloca): Stderr is
ignored, so use that PRE to set --log-fd=1 in VALGRIND_OPTS so we don't
miss Valgrind messages.
(Exploding the Stack Size with Malloc): Likewise.
Joel E. Denny [Wed, 10 Jan 2007 00:50:55 +0000 (00:50 +0000)]
Ignore YYSTACK_USE_ALLOCA for push parsers since the stacks can't be
locals. Reported by Juan Manuel Guerrero at
<http://lists.gnu.org/archive/html/bug-bison/2007-01/msg00000.html>.
* data/push.c: Enclose the #ifdef YYSTACK_USE_ALLOCA in b4_push_if.
Fix some indentation also.
* tests/torture.at (Exploding the Stack Size with Alloca): Add comment
explaining this issue.
Joel E. Denny [Tue, 9 Jan 2007 05:24:11 +0000 (05:24 +0000)]
Simplify union and prologue handling, and escape union and lex/parse
params with digraphs.
* data/bison.m4 (b4_pre_prologue, b4_post_prologue): Set their default
values to the empty string since these are no longer guaranteed
initialized by the front-end.
* data/glr.c, data/glr.cc, data/lalr1.cc, data/push.c, data/yacc.c: Add
braces around b4_user_stype since this is no longer done by the
front-end.
* src/files.c, src/files.h (pre_prologue_obstack,
post_prologue_obstack): Remove.
* src/muscle_tab.c (muscle_pair_list_grow): Don't duplicate header
comments here. Use MUSCLE_OBSTACK_SGROW so that values are escaped
with digraphs. This fixes lex params and parse params.
* src/muscle_tab.h (muscle_pair_list_grow): Update comments.
* src/output.c (prepare): Remove muscle insertion of the prologues.
(output): Remove freeing of pre_prologue_obstack and
post_prologue_obstack.
* src/parse-gram.y (prologue_declaration): Use muscle_code_grow rather
than prologue_augment for prologue parsing so you don't need prologue
obstacks.
(grammar_declaration): Use `braceless' instead of "{...}" so that
braces are already stripped and code is escaped with digraphs.
* src/reader.c (prologue_augment): Remove.
(reader): Remove initialization of pre_prologue_obstack and
post_prologue_obstack.
* src/reader.h (prologue_augment): Remove.
Joel E. Denny [Tue, 9 Jan 2007 01:17:51 +0000 (01:17 +0000)]
Remove quotes from variables names in %define directives and from
qualifiers in %code directives, and restrict the characters that are
allowed in them to M4-friendly ones. For %define, continue to support
the quoted form as a deprecated feature. Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00023.html>.
* NEWS (2.3a+): Add entry for the change to %define. Update entry for
%code.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Bison Declaration Summary): In %defines entry, update mention of
`%code requires' and `%code provides'.
(C++ Location Values): Update %define uses.
(Calc++ Parser Interface): Likewise.
(Calc++ Parser): Likewise, and update `%code requires' uses.
(Bison Symbols): Update %code documentation.
* src/parse-gram.y (prologue_declaration): For %define variables, use
`variable' instead of `STRING'.
(grammar_declaration): For %code qualifiers, use `ID' instead of
`STRING'.
(variable): New nonterminal that takes an `ID' or a `STRING'.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update %code
and %define uses.
* tests/calc.at (_AT_DATA_CALC_Y): Update %define use.
* tests/input.at (Reject unused %code qualifiers): Update %code uses.
(%define errors): Update %define uses.
Joel E. Denny [Mon, 8 Jan 2007 22:06:55 +0000 (22:06 +0000)]
* src/parse-gram.y (prologue_declaration): Use MUSCLE_INSERT_STRING
instead of muscle_insert for %define values so that M4-special
characters are replaced with digraphs.
* tests/input.at (%define errors): Extend to check weird values.
Joel E. Denny [Mon, 8 Jan 2007 21:38:30 +0000 (21:38 +0000)]
Instead of having skeletons declare all valid %define variables and
%code qualifiers, provide macros that retrieve the associated values
and build these lists automatically. Thus Bison will now warn when a
variable or qualifier is not used by the skeleton in the current
invocation regardless of whether it might sometimes be used by that
skeleton in other invocations. Also, move all %define value macros to
the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
form, which is replaced by %code.
* data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
(b4_check_user_names): ... this, and change the series of valid name
arguments to a single list argument for names used in the skeleton
similar to the existing list argument for names used in the grammar.
Warn instead of complaining.
(b4_get_percent_define, b4_get_percent_code): New to retrieve %define
values and %code code, to format %code code properly, and to build
lists of all %define variables and %code qualifiers used in the
skeleton: b4_skeleton_percent_define_variables and
b4_skeleton_percent_code_qualifiers.
(b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
Remove, and...
(m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
the skeleton names lists can finish building first. In place of
b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
expect the lists b4_user_percent_define_variables and
b4_user_percent_code_qualifiers.
* data/c++.m4: Where setting default values for b4_parser_class_name,
b4_location_type, b4_filename_type, b4_namespace, and
b4_define_location_comparison, update their names to the
b4_percent_define_ namespace.
* data/glr.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
(b4_parser_class_name, b4_namespace): Define these using
b4_get_percent_define for parser_class_name and namespace. Normally
this would be a bad idea since there might be cases when the variables
aren't used, but these variables are too pervasive in these skeletons
for that to be a problem.
* data/location.cc: Use b4_get_percent_define.
* data/push.c: Don't use b4_check_percent_define_variables and
b4_check_percent_code_qualifiers. Use b4_get_percent_code.
* data/yacc.c: Likewise, and don't call m4_exit in
b4_use_push_for_pull_if or m4_wrap code will never execute.
* src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
Rename to...
(muscle_grow_user_name_list): ... this for consistency with the
terminology used in bison.m4.
* src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
%define variable names, and rename muscle used_percent_define_variables
to user_percent_define_variables.
(grammar_declaration): Rename muscle used_percent_code_qualifiers to
user_percent_code_qualifiers.
(content): Remove.
(content.opt): Replace content RHS with STRING RHS so %define "NAME"
{CODE} form is no longer accepted.
* tests/input.at (Reject bad %code qualifiers): Rename to...
(Reject unused %code qualifiers): ... this, and update test output.
(%define error): Update test output.
Joel E. Denny [Sun, 7 Jan 2007 07:50:27 +0000 (07:50 +0000)]
Check for unrecognized %define variables similar to checking for
unrecognized %code qualifiers. Check for redefined %define variables.
* data/bison.m4 (b4_check_for_unrecognized_names): New macro that
generalizes...
(b4_check_percent_code_qualifiers): ... this, which now wraps it.
(b4_check_percent_define_variables): New, also wraps it.
* data/glr.c: Unless glr.cc is wrapping glr.c, declare no valid %define
variables using b4_check_percent_define_variables.
* data/glr.cc, data/lalr1.cc: Declare the valid %define variables as
all those exercised in the test suite and all those listed in the
`Default values' section of c++.m4. Are there others?
* data/push.c, data/yacc.c: Declare no valid %define variables.
* src/muscle_tab.c, src/muscle_tab.h (muscle_find_const): New function,
similar to muscle_find, but it works even when the muscle stores a
const value.
(muscle_grow_used_name_list): New function for constructing the used
name list muscles that b4_check_for_unrecognized_names requires.
* src/parse-gram.y (prologue_declaration): Warn if a variable is
%define'd more than once. Define the b4_used_percent_define_variables
muscle with muscle_grow_used_name_list.
(grammar_declaration): Abbreviate %code code with
muscle_grow_used_name_list.
* tests/input.at (%define errors): New.
Joel E. Denny [Sun, 7 Jan 2007 03:19:21 +0000 (03:19 +0000)]
Provide warn_at, complain_at, and fatal_at function callbacks to the
skeletons, and use this for %code qualifier complaints.
* data/bison.m4 (b4_error_at): New, invoked by...
(b4_warn_at, b4_complain_at, b4_fatal_at): ... these new macros to wrap
the skeleton scanner's new @warn_at(...@), @complain_at(...@), and
@fatal_at(...@) directives.
(b4_check_percent_code_qualifiers): Rewrite to expect locations for
qualifiers in b4_used_percent_code_qualifiers and to use
b4_complain_at.
* src/location.c, src/location.h (boundary_set_from_string): New global
function.
* src/muscle_tab.c, src/muscle_tab.h (muscle_boundary_grow): New global
function.
* src/parse-gram.y (grammar_declaration): Add locations for qualifiers
to b4_used_percent_code_qualifiers.
* src/scan-skel.l (fail_for_at_directive_too_few_args): New static
function.
(AT_DIRECTIVE_ARGC_MAX): Increase for boundary arguments.
(lineno): Rename to...
(out_lineno): ... this so I don't misunderstand it again.
(SC_AT_DIRECTIVE_SKIP_WS): Don't increment out_lineno for newlines
here; these newlines are in the input but not the output file.
(SC_AT_DIRECTIVE_ARG): Likewise. Extract directive execution to...
(at_directive_perform): ... this new static function, and add handling
of new @warn_at(...@), @complain_at(...@), and @fatal_at(...@)
directives.
* tests/input.at (Reject bad %code qualifiers): Update test output with
locations and extend.
* tests/output.at (Output file name: [, Output file name: ]): Remove
bogus comment about these tests failing.
Joel E. Denny [Sat, 6 Jan 2007 23:12:25 +0000 (23:12 +0000)]
Clean up b4_check_percent_code_qualifiers a little.
* data/bison.m4 (b4_check_percent_code_qualifiers): Expect qualifiers
in b4_used_percent_code_qualifiers to be double-M4-quoted. Rewrite
documentation and add examples.
* src/parse-gram.y (grammar_declaration): Double-M4-quote those
qualifiers here.
Joel E. Denny [Sat, 6 Jan 2007 06:14:04 +0000 (06:14 +0000)]
Don't use m4_divert since it makes m4_divert_push and m4_divert_pop
unreliable -- especially when they're hidden inside another macro.
* data/bison.m4, data/c++-skel.m4, data/c++.m4, data/c-skel.m4,
data/c.m4: Remove m4_divert(-1).
* data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
data/push.c, data/yacc.c: Likewise, and replace m4_divert(0) with
m4_divert_push(0) and m4_divert_pop(0).
* data/output.c (output_skeleton): Don't add an m4_divert_push(0) and
an m4_wrap([m4_divert_pop(0)]) to the M4. Diversion -1, which is
pushed and popped by m4sugar, should be first on the stack.
Provide warn, complain, and fatal function callbacks to the skeletons.
This provides more flexibility than m4_fatal, improves the error
message format, and captures messages for translation. Discussed
starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00063.html>.
* data/bison.m4 (b4_error): New, invoked by...
(b4_warn, b4_complain, b4_fatal): ... these new macros to wrap the
skeleton scanner's new @warn(...@), @complain(...@), and @fatal(...@)
directives. Because these M4 macros might be called when the current
diversion is -1 or 0, m4_divert_push and m4_divert_pop is used; thus
the previous removal of uses of m4_divert, which caused trouble.
(b4_check_percent_code_qualifiers): Use b4_complain instead of
m4_fatal to report unrecognized %code qualifiers.
* data/c++-skel.m4: Use b4_complain instead of m4_fatal to report C++
push parser requests.
* data/glr.c: Use b4_complain instead of m4_fatal to report
non-deterministic push parser requests.
Update @output usage to @output(...@) form.
* data/glr.cc, data/lalr1.cc: Use b4_fatal instead of m4_fatal to
report missing %defines. Update @output usage to @output(...@) form.
* data/location.cc, data/push.c, data/yacc.c: Update @output usage to
@output(...@) form.
* src/main.c (main): Invoke skel_scanner_free.
* src/scan-skel.h (skel_scanner_free): Prototype new function.
* src/scan-skel.l (FLEX_NO_OBSTACK): Don't define; we now need the
obstack_for_string from flex-scanner.h.
(YY_DECL): Use to declare skel_lex static.
(decode_at_digraphs): Remove; now handled in the new
SC_AT_DIRECTIVE_ARG start condition.
(fail_for_at_directive_too_many_args, fail_for_invalid_at): New static
functions.
(at_directive_name, AT_DIRECTIVE_ARGC_MAX, at_directive_argc,
at_directive_argv): New static globals.
(INITIAL): Use fail_for_invalid_at.
Don't parse `@output file_name\n' or `@basename(...@)'. Instead,
recognize the start of a generalized `@directive(...@)' form and
start...
(SC_AT_DIRECTIVE_ARG): ... this new start condition to parse the
directive args (using the new obstack_for_string), to decode the
contained @ diagraphs, and to perform the directive. It recognizes
@basename(...@), @warn(...@), @complain(...@), @fatal(...@), and
@output(...@).
(SC_AT_DIRECTIVE_SKIP_WS): New start condition started by
SC_AT_DIRECTIVE_ARG to skip whitespace after the argument delimiter,
`@,'.
(scan_skel): Initialize obstack_for_string on the first call.
(skel_scanner_free): New function to free obstack_for_string.
* tests/input.at (Reject bad %code qualifiers): Update test output.
Joel E. Denny [Fri, 5 Jan 2007 08:14:45 +0000 (08:14 +0000)]
Consolidate the 4 prologue alternative directives (%code, %requires,
%provides, and %code-top) into a single %code directive with an
optional qualifier field. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00012.html>.
* NEWS (2.3a+): Rewrite the existing entry for the prologue
alternatives.
* doc/bison.texinfo (Prologue Alternatives): Update.
(Decl Summary): Update to %code "requires" and %code "provides".
(Calc++ Parser): Update to %code "requires".
(Bison Symbols): Remove entries for %requires, %provides, and
%code-top. Rewrite %code entry, and add a %code "QUALIFIER" entry.
* data/bison.m4 (b4_user_provides, b4_user_requires): Remove as these
are replaced by b4_percent_code_provides and b4_percent_code_requires,
which are skeleton-specific.
(b4_check_percent_code_qualifiers): New. A skeleton can use this to
declare what %code qualifiers it supports and to complain if any other
qualifiers were used in the grammar.
* data/glr.cc: Update to use b4_user_code([b4_percent_code_requires])
and b4_user_code([b4_percent_code_provides]) in place of
b4_user_requires and b4_user_provides.
* data/glr.c, data/lalr1.cc, data/push.c, data/yacc.c: Likewise.
Add b4_user_code([b4_percent_code_top]) and
b4_user_code([b4_percent_code]).
Invoke b4_check_percent_code_qualifiers.
* src/parse-gram.y (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
(grammar_declaration): Remove RHS's for %code-top, %provides, and
%requires. Rewrite the %code RHS as the unqualified form defining the
muscle b4_percent_code. Add another RHS for the qualified %code form,
which defines muscles of the form b4_percent_code_QUALIFIER and the
b4_used_percent_code_qualifiers muscle.
* src/scan-gram.l (PERCENT_CODE_TOP, PERCENT_PROVIDES,
PERCENT_REQUIRES): Remove.
* tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update to use
%code "requires" and %code "provides".
* tests/input.at (Reject bad %code qualifiers): New.
Joel E. Denny [Thu, 4 Jan 2007 04:51:22 +0000 (04:51 +0000)]
Use the new code_props interface for destructors and printers.
* src/symtab.h (symbol, semantic_type): Remove destructor_location and
printer_location members, and change the type of the destructor and
printer members to code_props.
(symbol_destructor_set, symbol_destructor_get, symbol_printer_set,
symbol_printer_get, semantic_type_destructor_set,
semantic_type_printer_set, default_tagged_destructor_set,
default_tagless_destructor_set, default_tagged_printer_set,
default_tagless_printer_set): Use code_props in arguments and return
types in place of char const * and location.
(symbol_destructor_location_get, symbol_printer_location_get): Remove
since the locations are now contained in the return of
symbol_destructor_get and symbol_printer_get.
* src/output.c (symbol_destructors_output, symbol_printers_output):
Replace with...
(symbol_code_props_output): ... this to eliminate duplicate code.
(output_skeleton): Update to use symbol_code_props_output.
* src/reader.c (symbol_should_be_used): Update use of
symbol_destructor_get.
* src/symlist.c (symbol_list_destructor_set, symbol_list_printer_set):
Update uses of the various _destructor_set and _printer_set functions.
* src/symtab.c: (default_tagged_destructor_location,
default_tagless_destructor_location, default_tagged_printer_location,
default_tagless_printer_location): Remove since we...
(default_tagged_destructor, default_tagless_destructor,
default_tagged_printer, default_tagless_printer): ... change the type
of these to code_props.
(symbol_new, semantic_type_new, symbol_destructor_set,
semantic_type_destructor_set, symbol_destructor_get,
symbol_printer_set, semantic_type_printer_set, symbol_printer_get,
symbol_check_alias_consistency, default_tagged_destructor_set,
default_tagless_destructor_set, default_tagged_printer_set,
default_tagless_printer_set): Update.
(symbol_destructor_location_get, symbol_printer_location_get): Remove.
(SYMBOL_CODE_PRINT): New similar to SYMBOL_ATTR_PRINT but for
code_props members.
(symbol_print): Use SYMBOL_CODE_PRINT.
Joel E. Denny [Thu, 4 Jan 2007 03:21:08 +0000 (03:21 +0000)]
Use the new code_props interface for rule actions.
* src/symlist.h (symbol_list): Replace action, action_location, and
used members with a code_props action_props member.
* src/reader.c (symbol_should_be_used, grammar_rule_check,
grammar_midrule_action, grammar_current_rule_merge_set,
grammar_current_rule_symbol_append, packgram): Update.
* src/scan-code.h (translate_rule_action): Remove, no longer used.
* src/scan-code.l (handle_action_dollar): Update.
(translate_rule_action): Remove, no longer used.
* src/symlist.c (symbol_list_sym_new, symbol_list_syms_print): Update.
Joel E. Denny [Wed, 3 Jan 2007 05:14:57 +0000 (05:14 +0000)]
Use the new code_props interface in parse-gram.y.
* src/parse-gram.y (prologue_declaration, braceless, epilogue.opt):
Update all uses of translate_* functions to use the new code_props
interface and to use gram_scanner_last_string_free and
code_scanner_last_string_free where possible.
(grammar_declaration): symbol_list_destructor_set and
symbol_list_printer_set now perform the translation, so don't do it
here. Use gram_scanner_last_string_free where possible.
* src/scan-code.h, src/scan-code.l (translate_symbol_action,
translate_code): Remove, no longer used.
* src/symlist.h, src/symlist.c (symbol_list_destructor_set,
symbol_list_printer_set): Perform code translation here rather than
depending on the caller to do so.
* src/symlist.h (struct symbol_list): Correct some documentation typos.
* src/scan-gram.h (gram_last_string): Remove declaration.
* src/scan-gram.l (last_string): Declare it static.
Joel E. Denny [Tue, 2 Jan 2007 23:31:14 +0000 (23:31 +0000)]
Encapsulate code properties and related functionality for the various
destructors, printers, and actions into a code_props structure and
interface. This patch merely implements code_props in scan-code.h and
scan-code.l. Future patches will rewrite other modules to use it.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-11/msg00020.html>.
* src/location.h (EMPTY_LOCATION_INIT): Define so that it's easier to
consistently initialize const structs that have an empty location
field.
* src/location.c (empty_location): Initialize with EMPTY_LOCATION_INIT
to ensure consistency.
* src/scan-code.h (code_props): New structure.
(code_props_none_init, CODE_PROPS_NONE_INIT, code_props_none): New
function, macro, and const global variable for initializing a
code_props with no code.
(code_props_plain_init, code_props_symbol_action_init,
code_props_rule_action_init, code_props_translate_code): The rest of
the new code_props functional interface. Among other things, the init
functions set the code_props kind field so that
code_props_translate_code will know whether to behave like
translate_symbol_action, translate_rule_action, or translate_code.
These old translate functions must remain until all other modules are
updated to use the new code_props interface.
(code_scanner_last_string_free): New function similar to
gram_scanner_last_string_free.
(code_scanner_free): Add documentation.
* src/scan-code.l: Implement the new interface.
(code_lex): Make it static, add a code_props* argument, and remove the
rule argument.
(last_string): New static global similar to the one in scan-gram.l.
(SC_RULE_ACTION): Update to use the code_props* argument to code_lex
instead of rule.
(SC_SYMBOL_ACTION): For $$, set the is_value_used member of the
code_props since Bison may one day use this information for destructors
and printers.
(<*><<EOF>>): Use STRING_FINISH so that last_string is set.
(handle_action_dollar): Use symbol_list_n_get and set used flag
directly since symbol_list_n_used_set is removed.
(translate_action): Add a code_props* argument and remove the rule,
action, and location arguments. Pass the code_props* on to code_lex.
(translate_rule_action, translate_symbol_action, translate_code):
Rewrite as wrappers around the new code_props interface.
* src/symlist.h, src/symlist.c (symbol_list_n_used_set): Remove since
it would eventually need to break the encapsulation of code_props.
Joel E. Denny [Tue, 2 Jan 2007 02:10:42 +0000 (02:10 +0000)]
Add maintainer-push-check to run maintainer-check using push parsing in
place of pull parsing where available.
* Makefile.am (maintainer-push-check): New.
* data/bison.m4 (b4_use_push_for_pull_if): New.
* data/push.c: Redefine b4_push_if and b4_use_push_for_pull_if
appropriately based on their existing values.
(yypush_parse): Don't print push-parser-specific diagnostics if push
parsing is being used in place of pull parsing.
* data/yacc.c: If push parsing should replace pull parsing, redirect to
push.c.
* src/output.c (prepare): Check BISON_USE_PUSH_FOR_PULL environment
variable, and insert b4_use_push_for_pull_flag into muscles.
* tests/Makefile.am (maintainer-push-check): New.
Joel E. Denny [Mon, 1 Jan 2007 00:42:21 +0000 (00:42 +0000)]
* data/push.c (yypush_parse): Set yynew = 1 at the end of a parse
(whether successful or failed) so that yypush_parse can be invoked
again to start a new parse using the same yypstate.
* tests/torture.at (AT_DATA_STACK_TORTURE): For push mode, extend to
check multiple yypull_parse invocations on the same yypstate. For pull
mode, extend to check multiple yyparse invocations.
(Exploding the Stack Size with Alloca): Extend to try with
%push-pull-parser.
(Exploding the Stack Size with Malloc): Likewise.
* tests/calc.at (Simple LALR Calculator): Don't specify
%skeleton "push.c" since %push-pull-parser implies that now.
* tests/headers.at (export YYLTYPE): Don't check for the push
declarations. Otherwise, this test case can't be used to see if push
mode can truly emulate pull mode.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_YACC_OR_PUSH_IF, AT_PUSH_IF): Remove.
(AT_YYERROR_SEES_LOC_IF): Rather than AT_YACC_OR_PUSH_IF, use
AT_YACC_IF, which now includes the case of push mode since %skeleton
need not be used for push mode. This will be more intuitive once
push.c is renamed to yacc.c.
Joel E. Denny [Sun, 31 Dec 2006 20:29:48 +0000 (20:29 +0000)]
For push mode, convert yyparse from a macro to a function, invoke yylex
instead of passing a yylexp argument to yypull_parse, and don't
generate yypull_parse or yyparse unless %push-pull-parser is declared.
Discussed starting at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
* data/bison.m4 (b4_pull_if): New.
* data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
* data/push.c: Improve M4 quoting a little.
(b4_generate_macro_args, b4_parenthesize): Remove.
(yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
any time a pull parser is requested.
Don't #define this as a wrapper around yypull_parse. Instead, when
both push and pull are requested, make it a function that does that
same thing.
(yypull_parse): If there's a b4_prefix, #define this to
b4_prefix[pull_parse] when both push and pull are requested.
Don't define this as a function unless both push and pull are
requested.
Remove the yylexp argument and hard-code yylex invocation instead.
* etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
%push-parser.
* src/getargs.c (pull_parser): New global initialized to true.
* getargs.h (pull_parser): extern it.
* src/output.c (prepare): Insert pull_flag muscle.
* src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
(prologue_declaration): Set both push_parser and pull_parser = true for
%push-pull-parser. Set push_parser = true and pull_parser = false for
%push-parser.
* src/scan-gram.l: Don't accept %push_parser as an alternative to
%push-parser since there's no backward-compatibility concern here.
Scan %push-pull-parser.
* tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
instead of %push-parser.
* tests/headers.at (export YYLTYPE): Make yylex static, and don't
prototype it in the module that calls yyparse.
* tests/input.at (Torturing the Scanner): Likewise.
* tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
Joel E. Denny [Tue, 26 Dec 2006 18:09:53 +0000 (18:09 +0000)]
Update etc/bench.pl. Optimize push mode a little (the yyn change
deserves most of the credit).
* Makefile.am (SUBDIRS): Add etc subdirectory.
* configure.ac (AC_CONFIG_FILES): Add etc/bench.pl and etc/Makefile.
* data/push.c (b4_declare_parser_state_variables): Move yyn, yyresult,
yytoken, yyval, and yyloc declarations to...
(yyparse or yypush_parse): ... here to improve performance. For
yypush_parse invocations after the first, be sure to assign yyn its old
value again.
(yypstate_new): Don't bother initializing the yyresult field since the
initial value isn't used.
(yyn, yyresult, yytoken, yyval, yyloc): For each NAME in this list,
remove the #define that, in push mode, set it to yyps->NAME.
* etc/Makefile.am: New.
* etc/bench.pl: Remove and build it instead from...
* etc/bench.pl.in: ... this new file. Use @abs_top_builddir@ to invoke
"tests/bison" from the build directory by default rather than just
invoking "bison" from $PATH.
(calc_grammar): Update push parser code: don't declare yylval globally,
don't define yyparse_wrapper, and don't #define yyparse.
(bench_grammar): Update to check all working combinations of yacc.c,
push.c, impure, pure, pull, and push.
Joel E. Denny [Mon, 25 Dec 2006 18:21:52 +0000 (18:21 +0000)]
For push mode, add pull wrappers around yypush_parse.
* data/push.c: (b4_generate_macro_args, b4_parenthesize): New macros.
(yypull_parse): New function wrapping yypush_parse.
(yyparse): New #define wrapping yypull_parse.
* tests/calc.at (_AT_DATA_CALC_Y): Call yyparse even when %push-parser
is declared.
* tests/headers.at (export YYLTYPE): Make yylex global. For push mode,
prototype yylex in the module that calls yyparse, and don't prototype
yyparse there. Otherwise, the yyparse expansion won't compile.
* tests/input.at (Torturing the Scanner): Likewise.
Joel E. Denny [Mon, 25 Dec 2006 17:25:39 +0000 (17:25 +0000)]
Enable push parsers to operate in impure mode. Thus, %push-parser no
longer implies %pure-parser. The point of this change is to move
towards being able to test the push parser code by running the entire
test suite as if %push-parser had been declared.
* data/push.c (yypush_parse): For impure mode, remove the
yypushed_char, yypushed_val, and yypushed_loc arguments.
Instead, declare these as local variables initialized to the global
yychar, yylval, and yylloc.
For the first yypush_parse invocation only, restore the initial values
of these global variables when it's time to read a token since they
have been overwritten.
* src/parse-gram.y (prologue_declaration): Don't set pure_parser for
%push-parser.
* tests/calc.at (Simple LALR(1) Calculator): Always declare
%pure-parser along with %push-parser since this test case was designed
for pure push parsers.
* tests/local.at (AT_PURE_OR_PUSH_IF): Remove unused.
(AT_YACC_OR_PUSH_IF): New.
(AT_YYERROR_SEES_LOC_IF): Fix enough that the test suite passes, but
add a note that it's still wrong for some cases (as it has been for a
while).
(AT_PURE_LEX_IF): Use AT_PURE_IF instead of AT_PURE_OR_PUSH_IF since
%push-parser no longer implies %pure-parser.
Joel E. Denny [Wed, 20 Dec 2006 07:48:57 +0000 (07:48 +0000)]
Remove some unnecessary differences between the pull parser code and
the push parser code. This patch enables yynerrs in push mode.
* data/push.c: Reformat M4 a little.
(b4_yyerror_range): Remove and convert all uses to just yyerror_range.
(b4_declare_scanner_communication_variables): Don't omit yynerrs just
because push mode is on. Instead, if pure mode is on, move yynerrs
to...
(b4_declare_parser_state_variables): ... here.
(yynerrs, yyerror_range): For push mode, #define each NAME in this list
to yyps->NAME so it can be used in yypush_parse.
(yypush_parse): Don't omit uses of yynerrs in push mode.
Joel E. Denny [Wed, 20 Dec 2006 06:46:20 +0000 (06:46 +0000)]
Fix bug such that the first pushed token's value and location are
sometimes overwritten (sometimes by %initial-action) before being used.
* data/push.c (yypush_parse): Rename arguments yynchar, yynlval, and
yynlloc to yypushed_char, yypushed_val, and yypushed_loc for clarity.
For the first yypush_parse invocation, initialize yychar to YYEMPTY to
more closely mimic the pull parser logic.
Don't copy the pushed token to yychar, yylval, and yylloc until it's
time to read a token, which is after any initialization of yylval and
yylloc.
(gottoken): Rename label to...
(yyread_pushed_token): ... for clarity and to avoid infringing on the
user namespace.
Joel E. Denny [Wed, 20 Dec 2006 06:33:30 +0000 (06:33 +0000)]
Rearrange initialization of the parser state variables so that the
skeleton doesn't have to have a copy for pull mode and another for push
mode. This patch also fixes at least a bug such that yylloc was not
initialized (with b4_location_initial_line and
b4_location_initial_column) upon calling yypush_parse. However, that
initialization now overwrites the first token's location;
%initial-action assigning @$ already did the same thing, and both bugs
will be fixed in a later patch.
* data/push.c (b4_yyssa): Remove and convert all uses to just yyssa.
(b4_declare_parser_state_variables): Remove initialization of yytoken,
yyss, yyvs, yyls, and yystacksize.
(yypstate_new): Remove initialization of some yypstate fields: yystate,
yyerrstatus, yytoken, yyss, yyvs, yyls, yystacksize, yyssp, yyvsp, and
yylsp.
(yyssa, yyvsa, yylsa): For push mode, #define each NAME in this list to
yyps->NAME so it can be used in yypush_parse.
(yyparse or yypush_parse): For yypush_parse, don't print the
"Starting parse" diagnostic for invocations after the first.
Add initialization of yytoken, yyss, yyvs, yyls, and yystacksize; for
yypush_parse, only do it for the first invocation.
Allow yystate, yyerrstatus, yyssp, yyvsp, yylsp, and yylloc
initialization to occur in yypush_parse but only on the first
invocation.
Joel E. Denny [Wed, 20 Dec 2006 06:15:54 +0000 (06:15 +0000)]
* data/push.c: Add CPP guards around push parser declarations in both
the header and the code file.
In the code file, move the push parser declarations to the same place
they appear in the header file.
Clean up the M4 some, especially the inconsistent underquoting in
some b4_c_function_def and b4_c_function_decl uses.
Joel E. Denny [Wed, 20 Dec 2006 00:59:18 +0000 (00:59 +0000)]
Encapsulate the push parser state variables into an M4 macro so the
push skeleton doesn't have to list them again for pull mode's yyparse.
For push mode, remove yypush_parse's local equivalents of these
variables to eliminate unnecessary copying between the two sets at
run-time. This patch also fixes at least a bug related to multiple
%initial-action invocations in push mode.
* data/push.c (b4_declare_parser_variables): Rename to...
(b4_declare_scanner_communication_variables): ... this for clarity and
update both uses.
(b4_declare_yyparse_variables): Remove and move its contents to the one
spot where it was invoked.
(b4_declare_parser_state_variables): New macro containing the parser
state variables required by push mode.
(struct yypstate): Replace all fields but yynew with
b4_declare_parser_state_variables.
(yystate, yyn, yyresult, yyerrstatus, yytoken, yyss, yyssp, yyvs,
yyvsp, yyls, yylsp, yystacksize, yyval, yyloc): For push mode, #define
each NAME in this list to yyps->NAME so it can be used in yypush_parse.
(yyparse or yypush_parse): For yyparse in pull mode, replace local
parser state variable declarations with
b4_declare_parser_state_variables.
Don't initialize parser state variables when calling yypush_parse since
yypstate_new already does that.
Invoke the user's initial action only upon the first yypush_parse
invocation.
Remove all code that copies between the local parser state variables
and the yypstate.
Joel E. Denny [Tue, 19 Dec 2006 21:40:14 +0000 (21:40 +0000)]
* data/push.c (union yyalloc): Rename yyss, yyvs, and yyls fields to
prevent a name collision in a future patch where these names will
sometimes be #define'd.
(YYSTACK_RELOCATE): Add an argument to select a union yyalloc field
since it no longer has the same name as the existing argument.
(yyparse or yypush_parse): Update all uses of YYSTACK_RELOCATE.
Joel E. Denny [Tue, 19 Dec 2006 07:52:02 +0000 (07:52 +0000)]
* doc/bison.texinfo (Decl Summary): In the %language entry, mention
that the argument is case-insensitive, and there's no `=' here.
For the %skeleton entry, mention that %language is better.
(Bison Options): Likewise for --language and --skeleton. Move the
--skeleton entry so that the `Tuning the parser' section is sorted
alphabetically on long options.
(C++ Bison Interface): Don't use the word skeleton. Don't explain the
%language directive in detail here; cross-reference the %language
documentation instead.
(Calc++ Parser): Use `%require "@value{VERSION}"' rather than
`%require "2.3b"' so that the example is always up-to-date.
(Bison Symbols): Add entries for %language and %skeleton.
* examples/extexi (normalize): Instead of replacing every %require
argument with the current Bison version, just substitute for
`@value{VERSION}'. This guarantees that we're testing what actually
appears in the documentation.
* examples/calc++/Makefile.am ($(calc_extracted)): Use `$(VERSION)'
rather than `@VERSION@'.
Paul Eggert [Mon, 18 Dec 2006 17:27:23 +0000 (17:27 +0000)]
* src/symtab.h (struct semantic_type): Remove the tag 'semantic_type',
since it wasn't used; only the typedef name 'semantic_type' is needed.
Also, omit trailing white space.
Paul Eggert [Mon, 18 Dec 2006 17:23:37 +0000 (17:23 +0000)]
* bootstrap: Sync from coreutils.
(gnulib_extra_files): Add build-aux/announce.gen.
(slurp): Adjust .gitignore files like .cvsignore files.
* build-aux/announce-gen: Remove from CVS, since bootstrap
now creates this.
Joel E. Denny [Sun, 17 Dec 2006 01:33:31 +0000 (01:33 +0000)]
Make %push-parser imply %pure-parser. This fixes several bugs; see
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00148.html>.
* src/parse-gram.y (prologue_declaration): For %push-parser, also set
pure_parser = true.
* data/push.c: Don't bother testing b4_push_if when deciding whether
to expand b4_declare_parser_variables globally.
(yypush_parse): Likewise in here.
* data/push.c (yypush_parse): Add b4_parse_param to arguments.
(yy_reduce_print): Reformat M4 for readability.
Joel E. Denny [Fri, 15 Dec 2006 05:31:26 +0000 (05:31 +0000)]
* data/push.c (yypstate): Add typedef, and update all uses of
struct yypstate to just yypstate.
* tests/calc.at (_AT_DATA_CALC_Y): Update here as well.
Joel E. Denny [Thu, 14 Dec 2006 02:58:11 +0000 (02:58 +0000)]
* data/push.c (yypstate_init): Rename to...
(yypstate_new): ... this and use b4_c_function_def.
(yypstate_delete): New.
(yypush_parse): Change parameters yynval and yynlloc to be const.
* tests/calc.at (_AT_DATA_CALC_Y): Use new yypstate_new and
yypstate_delete functions.
Joel E. Denny [Tue, 12 Dec 2006 06:47:39 +0000 (06:47 +0000)]
* tests/testsuite.at (AT_CHECK): When checking if $1 starts with
`bison ', use m4_index instead of m4_substr since chopping up a string
containing M4-special characters causes problems here.
Fix a couple of bugs related to special characters in user-specified
file names, and make it easier for skeletons to compute output file
names with the same file name prefix as Bison-computed output file
names.
* data/glr.cc, data/push.c, data/yacc.c: In @output, use
b4_parser_file_name and b4_spec_defines_file instead of
@output_parser_name@ and @output_header_name@, which are now redundant.
* data/glr.c, data/lalr1.cc: Likewise. Also, in header #include's, use
b4_parser_file_name, b4_spec_defines_file, and the new
@basename(FILENAME@) instead of @output_parser_name@ and
@output_header_name@, which inappropriately escaped the file names as
C string literals.
* src/files.c (all_but_ext): Remove static qualifier.
(compute_output_file_names): Move `free (all_but_ext)' to...
(output_file_names_free): ... here since all_but_ext is needed later.
* src/files.h (all_but_ext): Extern.
* src/muscle_tab.h (MUSCLE_INSERT_STRING_RAW): New macro that does
exactly what MUSCLE_INSERT_STRING used to do.
(MUSCLE_INSERT_STRING): Use MUSCLE_OBSTACK_SGROW so that M4-special
characters are escaped properly.
* src/output.c (prepare): Define muscle file_name_all_but_ext as
all_but_ext.
For pkgdatadir muscle, maintain previous functionality by using
MUSCLE_INSERT_STRING_RAW instead of MUSCLE_INSERT_STRING. The problem
is that b4_pkgdatadir is used inside m4_include in the skeletons, so
digraphs would never be expanded. Hopefully no one has M4-special
characters in his Bison installation path.
* src/scan-skel.l: Don't parse @output_header_name@ and
@output_parser_name@ anymore since they're now redundant.
In @output, use decode_at_digraphs.
Parse a new @basename command that invokes last_component.
(decode_at_digraphs): New.
(BASE_QPUTS): Remove unused.
* tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): New macro.
(Output file name): New tests.
Joel E. Denny [Sun, 10 Dec 2006 00:16:15 +0000 (00:16 +0000)]
Warn about output files that are generated by the skeletons and that
conflict with other output files.
* data/glr.c: Don't generate the header file here when glr.cc does.
* src/files.c (file_names, file_names_count): New static globals.
(compute_output_file_names): Invoke output_file_name_check for files
not generated by the skeletons and remove existing checks.
(output_file_name_check): New function that warns about conflicting
output file names.
(output_file_names_free): Free file_names.
* src/files.h (output_file_name_check): Declare.
* src/scan-skel.l: Invoke output_file_name_check for files generated by
the skeletons.
* tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): New.
(Conflicting output files): New tests.
Joel E. Denny [Fri, 8 Dec 2006 01:04:39 +0000 (01:04 +0000)]
* data/push.c (yypvarsinit): Change return type from void* to struct
yypvars*. No longer cast to void* on return.
(struct yypvars): Remove yylen since it need not be remembered between
yypushparse invocations.
(yypushparse): Don't copy between yylen and pv->yylen.
Joel E. Denny [Thu, 7 Dec 2006 02:21:13 +0000 (02:21 +0000)]
* data/push.c (yychar_set, yylval_set, yylloc_set): Delete.
(yypushparse): Add yynchar, yynlval, yynlloc parameters.
(b4_declare_parser_variables): Do not declare yynerrs for push mode.
(struct yypvars): Remove b4_declare_parser_variables.
(yypvarsinit): Remove init code for removed variables.
(global scope): Do not declare b4_declare_parser_variables if
push or pure mode.
(yypushparse): Add b4_declare_parser_variables.
Init new local variables, and remove init code for removed
yypvars variables.
(yyparse): Delete.
* tests/calc.at (_AT_DATA_CALC_Y): Call yypushparse for push mode
and yyparse for other modes.
(AT_CHECK_CALC_LALR): Added '%skeleton "push.c"' for push tests.
* tests/local.at (AT_PUSH_IF, AT_PURE_OR_PUSH_IF): Added.
(AT_YYERROR_SEES_LOC_IF): push-parser makes this false.
(AT_PURE_LEX_IF): True if pure or push parser.
Joel E. Denny [Tue, 5 Dec 2006 23:13:41 +0000 (23:13 +0000)]
Document Yacc prologue alternatives and default %destructor's and
%printer's as experimental. Don't mention Java yet. Discussed at
<http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00002.html>.
* NEWS (2.3a+): Say they're experimental. Remove any mention of Java.
(2.3a): Annotate this entry to say the old forms of these features were
also experimental.
* doc/bison.texinfo (Prologue Alternatives, Freeing Discarded Symbols,
Bison Symbols): Say they're experimental. Comment out any mention
of Java (we'll want this back eventually).
Joel E. Denny [Sat, 2 Dec 2006 01:52:16 +0000 (01:52 +0000)]
Support a file name argument to %defines. Deprecate `=' in
%file-prefix, %name-prefix, and %output. Discussed at
<http://lists.gnu.org/archive/html/help-bison/2006-09/msg00001.html>.
* NEWS (2.3a+): Mention.
* doc/bison.texinfo (Decl Summary, Bison Symbols): Add entry for new
form of %defines, and remove `=' from entries for %file-prefix,
%name-prefix, and %output.
* src/parse-gram.y (prologue_declaration): Implement.
* tests/calc.at (Simple LALR Calculator, Simple GLR Calculator, Simple
LALR1 C++ Calculator, Simple GLR C++ Calculator): Remove the `=' from
all but one occurrence of %name-prefix.
* tests/headers.at (export YYLTYPE): Remove the `=' from %name-prefix.
* tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Likewise.
* tests/output.at (AT_CHECK_OUTPUT): Remove the `=' from all but one
occurrence of each of %file-prefix and %output. Add check for %defines
with argument.
* tests/reduce.at (Useless Terminals, Useless Nonterminals,
Useless Rules, Reduced Automaton, Underivable Rules, Empty Language):
Remove the `=' from %output.
Joel E. Denny [Tue, 21 Nov 2006 07:07:35 +0000 (07:07 +0000)]
Don't escape $ in test case titles since Autoconf 2.61 now does that
correctly.
* tests/actions.at (Default %printer and %destructor are not for error
or $undefined): Here.
(Default %printer and %destructor are not for $accept): Here.
* tests/input.at (Invalid $n and @n): Here.
projects / bison.git / log
