]> git.saurik.com Git - apple/xnu.git/blobdiff - bsd/vfs/vfs_journal.c
xnu-2422.115.4.tar.gz
[apple/xnu.git] / bsd / vfs / vfs_journal.c
index 6e47742b1a55815857416cbc47aeab3cdb1b2938..d385566923ef5a5ba5971bf9e804eaf7b5722577 100644 (file)
@@ -1,14 +1,19 @@
 /*
- * Copyright (c) 1995-2004 Apple Computer, Inc. All rights reserved.
+ * Copyright (c) 2002-2012 Apple Inc. All rights reserved.
  *
- * @APPLE_LICENSE_HEADER_START@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
  * 
  * This file contains Original Code and/or Modifications of Original Code
  * as defined in and that are subject to the Apple Public Source License
  * Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ * 
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
  * 
  * The Original Code and all software distributed under the License are
  * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
@@ -18,7 +23,7 @@
  * Please see the License for the specific language governing rights and
  * limitations under the License.
  * 
- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  */
 //
 // This file implements a simple write-ahead journaling layer.  
 #include <sys/tty.h>
 #include <sys/ubc.h>
 #include <sys/malloc.h>
+#include <kern/task.h>
 #include <kern/thread.h>
+#include <kern/kalloc.h>
 #include <sys/disk.h>
+#include <sys/kdebug.h>
 #include <miscfs/specfs/specdev.h>
+#include <libkern/OSAtomic.h>  /* OSAddAtomic */
+
+kern_return_t  thread_terminate(thread_t);
 
-extern task_t kernel_task;
+/*
+ * Set sysctl vfs.generic.jnl.kdebug.trim=1 to enable KERNEL_DEBUG_CONSTANT
+ * logging of trim-related calls within the journal.  (They're
+ * disabled by default because there can be a lot of these events,
+ * and we don't want to overwhelm the kernel debug buffer.  If you
+ * want to watch these events in particular, just set the sysctl.)
+ */
+static int jnl_kdebug = 0;
+SYSCTL_DECL(_vfs_generic);
+SYSCTL_NODE(_vfs_generic, OID_AUTO, jnl, CTLFLAG_RW|CTLFLAG_LOCKED, 0, "Journal");
+SYSCTL_NODE(_vfs_generic_jnl, OID_AUTO, kdebug, CTLFLAG_RW|CTLFLAG_LOCKED, 0, "Journal kdebug");
+SYSCTL_INT(_vfs_generic_jnl_kdebug, OID_AUTO, trim, CTLFLAG_RW|CTLFLAG_LOCKED, &jnl_kdebug, 0, "Enable kdebug logging for journal TRIM");
+
+#define DBG_JOURNAL_FLUSH                      FSDBG_CODE(DBG_JOURNAL, 1)
+#define DBG_JOURNAL_TRIM_ADD           FSDBG_CODE(DBG_JOURNAL, 2)
+#define DBG_JOURNAL_TRIM_REMOVE                FSDBG_CODE(DBG_JOURNAL, 3)
+#define DBG_JOURNAL_TRIM_REMOVE_PENDING        FSDBG_CODE(DBG_JOURNAL, 4)
+#define DBG_JOURNAL_TRIM_REALLOC       FSDBG_CODE(DBG_JOURNAL, 5)
+#define DBG_JOURNAL_TRIM_FLUSH         FSDBG_CODE(DBG_JOURNAL, 6)
+#define DBG_JOURNAL_TRIM_UNMAP         FSDBG_CODE(DBG_JOURNAL, 7)
+
+/* 
+ * Cap the journal max size to 2GB.  On HFS, it will attempt to occupy
+ * a full allocation block if the current size is smaller than the allocation
+ * block on which it resides.  Once we hit the exabyte filesystem range, then
+ * it will use 2GB allocation blocks.  As a result, make the cap 2GB.
+ */
+#define MAX_JOURNAL_SIZE 0x80000000U
 
+#include <sys/sdt.h> /* DTRACE_IO1 */
 #else
 
 #include <stdio.h>
@@ -69,15 +108,57 @@ extern task_t kernel_task;
 
 #include "vfs_journal.h"
 
+#include <sys/kdebug.h>
+
+#if 0
+#undef KERNEL_DEBUG
+#define KERNEL_DEBUG KERNEL_DEBUG_CONSTANT
+#endif
+
+
+#ifndef CONFIG_HFS_TRIM
+#define CONFIG_HFS_TRIM 0
+#endif
+
+
+#if JOURNALING
+
+//
+// By default, we grow the list of extents to trim by one page at a time.
+// We'll opt to flush a transaction if it contains at least
+// JOURNAL_FLUSH_TRIM_EXTENTS extents to be trimmed (even if the number
+// of modified blocks is small).
+//
+enum {
+    JOURNAL_DEFAULT_TRIM_BYTES = PAGE_SIZE,
+    JOURNAL_DEFAULT_TRIM_EXTENTS = JOURNAL_DEFAULT_TRIM_BYTES / sizeof(dk_extent_t),
+    JOURNAL_FLUSH_TRIM_EXTENTS = JOURNAL_DEFAULT_TRIM_EXTENTS * 15 / 16
+};
+
+unsigned int jnl_trim_flush_limit = JOURNAL_FLUSH_TRIM_EXTENTS;
+SYSCTL_UINT (_kern, OID_AUTO, jnl_trim_flush, CTLFLAG_RW, &jnl_trim_flush_limit, 0, "number of trimmed extents to cause a journal flush");
+
+/* XXX next prototype should be from libsa/stdlib.h> but conflicts libkern */
+__private_extern__ void qsort(
+       void * array,
+       size_t nmembers,
+       size_t member_size,
+       int (*)(const void *, const void *));
+
+
 
 // number of bytes to checksum in a block_list_header
 // NOTE: this should be enough to clear out the header
 //       fields as well as the first entry of binfo[]
 #define BLHDR_CHECKSUM_SIZE 32
 
-
-
-static int  end_transaction(transaction *tr, int force_it);
+static void lock_condition(journal *jnl, boolean_t *condition, const char *condition_name);
+static void wait_condition(journal *jnl, boolean_t *condition, const char *condition_name);
+static void unlock_condition(journal *jnl, boolean_t *condition);
+static void finish_end_thread(transaction *tr);
+static void write_header_thread(journal *jnl);
+static int finish_end_transaction(transaction *tr, errno_t (*callback)(void*), void *callback_arg);
+static int end_transaction(transaction *tr, int force_it, errno_t (*callback)(void*), void *callback_arg, boolean_t drop_lock, boolean_t must_wait);
 static void abort_transaction(journal *jnl, transaction *tr);
 static void dump_journal(journal *jnl);
 
@@ -85,8 +166,8 @@ static __inline__ void  lock_journal(journal *jnl);
 static __inline__ void  unlock_journal(journal *jnl);
 static __inline__ void  lock_oldstart(journal *jnl);
 static __inline__ void  unlock_oldstart(journal *jnl);
-
-
+static __inline__ void  lock_flush(journal *jnl);
+static __inline__ void  unlock_flush(journal *jnl);
 
 
 //
@@ -94,76 +175,71 @@ static __inline__ void  unlock_oldstart(journal *jnl);
 //
 
 typedef struct bucket {
-    off_t block_num;
-    size_t jnl_offset;
-    size_t block_size;
+       off_t     block_num;
+       uint32_t  jnl_offset;
+       uint32_t  block_size;
+       int32_t   cksum;
 } bucket;
 
 #define STARTING_BUCKETS 256
 
-static int add_block(journal *jnl, struct bucket **buf_ptr, off_t block_num, size_t size, size_t offset, int *num_buckets_ptr, int *num_full_ptr);
+static int add_block(journal *jnl, struct bucket **buf_ptr, off_t block_num, size_t size, size_t offset, int32_t cksum, int *num_buckets_ptr, int *num_full_ptr);
 static int grow_table(struct bucket **buf_ptr, int num_buckets, int new_size);
 static int lookup_bucket(struct bucket **buf_ptr, off_t block_num, int num_full);
-static int do_overlap(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t block_num, size_t size, size_t offset, int *num_buckets_ptr, int *num_full_ptr);
-static int insert_block(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t num, size_t size, size_t offset, int *num_buckets_ptr, int *num_full_ptr, int overwriting);
+static int do_overlap(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t block_num, size_t size, size_t offset, int32_t cksum, int *num_buckets_ptr, int *num_full_ptr);
+static int insert_block(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t num, size_t size, size_t offset, int32_t cksum, int *num_buckets_ptr, int *num_full_ptr, int overwriting);
 
 #define CHECK_JOURNAL(jnl) \
-    do { \
-    if (jnl == NULL) {\
-       panic("%s:%d: null journal ptr?\n", __FILE__, __LINE__);\
-    }\
-    if (jnl->jdev == NULL) { \
-       panic("%s:%d: jdev is null!\n", __FILE__, __LINE__);\
-    } \
-    if (jnl->fsdev == NULL) { \
-       panic("%s:%d: fsdev is null!\n", __FILE__, __LINE__);\
-    } \
-    if (jnl->jhdr->magic != JOURNAL_HEADER_MAGIC) {\
-       panic("%s:%d: jhdr magic corrupted (0x%x != 0x%x)\n",\
-       __FILE__, __LINE__, jnl->jhdr->magic, JOURNAL_HEADER_MAGIC);\
-    }\
-    if (   jnl->jhdr->start <= 0 \
-       || jnl->jhdr->start > jnl->jhdr->size\
-       || jnl->jhdr->start > 1024*1024*1024) {\
-       panic("%s:%d: jhdr start looks bad (0x%llx max size 0x%llx)\n", \
-       __FILE__, __LINE__, jnl->jhdr->start, jnl->jhdr->size);\
-    }\
-    if (   jnl->jhdr->end <= 0 \
-       || jnl->jhdr->end > jnl->jhdr->size\
-       || jnl->jhdr->end > 1024*1024*1024) {\
-       panic("%s:%d: jhdr end looks bad (0x%llx max size 0x%llx)\n", \
-       __FILE__, __LINE__, jnl->jhdr->end, jnl->jhdr->size);\
-    }\
-    if (jnl->jhdr->size > 1024*1024*1024) {\
-       panic("%s:%d: jhdr size looks bad (0x%llx)\n",\
-       __FILE__, __LINE__, jnl->jhdr->size);\
-    } \
-    } while(0)
+       do {               \
+       if (jnl == NULL) {                                      \
+               panic("%s:%d: null journal ptr?\n", __FILE__, __LINE__); \
+       }                                                               \
+       if (jnl->jdev == NULL) {                                \
+               panic("%s:%d: jdev is null!\n", __FILE__, __LINE__); \
+       }                                                       \
+       if (jnl->fsdev == NULL) {                               \
+               panic("%s:%d: fsdev is null!\n", __FILE__, __LINE__);   \
+       }                                                               \
+       if (jnl->jhdr->magic != JOURNAL_HEADER_MAGIC) {                 \
+               panic("%s:%d: jhdr magic corrupted (0x%x != 0x%x)\n",   \
+                     __FILE__, __LINE__, jnl->jhdr->magic, JOURNAL_HEADER_MAGIC); \
+       }                                                               \
+       if (   jnl->jhdr->start <= 0                                    \
+              || jnl->jhdr->start > jnl->jhdr->size) {                 \
+               panic("%s:%d: jhdr start looks bad (0x%llx max size 0x%llx)\n", \
+                     __FILE__, __LINE__, jnl->jhdr->start, jnl->jhdr->size); \
+       }                                                               \
+       if (   jnl->jhdr->end <= 0                                      \
+              || jnl->jhdr->end > jnl->jhdr->size) {                   \
+               panic("%s:%d: jhdr end looks bad (0x%llx max size 0x%llx)\n", \
+                     __FILE__, __LINE__, jnl->jhdr->end, jnl->jhdr->size); \
+       }                                                               \
+       } while(0)
 
 #define CHECK_TRANSACTION(tr) \
-    do {\
-    if (tr == NULL) {\
-       panic("%s:%d: null transaction ptr?\n", __FILE__, __LINE__);\
-    }\
-    if (tr->jnl == NULL) {\
-       panic("%s:%d: null tr->jnl ptr?\n", __FILE__, __LINE__);\
-    }\
-    if (tr->blhdr != (block_list_header *)tr->tbuffer) {\
-       panic("%s:%d: blhdr (0x%x) != tbuffer (0x%x)\n", __FILE__, __LINE__, tr->blhdr, tr->tbuffer);\
-    }\
-    if (tr->total_bytes < 0) {\
-       panic("%s:%d: tr total_bytes looks bad: %d\n", __FILE__, __LINE__, tr->total_bytes);\
-    }\
-    if (tr->journal_start < 0 || tr->journal_start > 1024*1024*1024) {\
-       panic("%s:%d: tr journal start looks bad: 0x%llx\n", __FILE__, __LINE__, tr->journal_start);\
-    }\
-    if (tr->journal_end < 0 || tr->journal_end > 1024*1024*1024) {\
-       panic("%s:%d: tr journal end looks bad: 0x%llx\n", __FILE__, __LINE__, tr->journal_end);\
-    }\
-    if (tr->blhdr && (tr->blhdr->max_blocks <= 0 || tr->blhdr->max_blocks > (tr->jnl->jhdr->size/tr->jnl->jhdr->jhdr_size))) {\
-       panic("%s:%d: tr blhdr max_blocks looks bad: %d\n", __FILE__, __LINE__, tr->blhdr->max_blocks);\
-    }\
-    } while(0)
+       do {                  \
+       if (tr == NULL) {                                       \
+               panic("%s:%d: null transaction ptr?\n", __FILE__, __LINE__); \
+       }                                                               \
+       if (tr->jnl == NULL) {                                          \
+               panic("%s:%d: null tr->jnl ptr?\n", __FILE__, __LINE__); \
+       }                                                               \
+       if (tr->blhdr != (block_list_header *)tr->tbuffer) {            \
+               panic("%s:%d: blhdr (%p) != tbuffer (%p)\n", __FILE__, __LINE__, tr->blhdr, tr->tbuffer); \
+       }                                                               \
+       if (tr->total_bytes < 0) {                                      \
+               panic("%s:%d: tr total_bytes looks bad: %d\n", __FILE__, __LINE__, tr->total_bytes); \
+       }                                                               \
+       if (tr->journal_start < 0) {                                    \
+               panic("%s:%d: tr journal start looks bad: 0x%llx\n", __FILE__, __LINE__, tr->journal_start); \
+       }                                                               \
+       if (tr->journal_end < 0) {                                      \
+               panic("%s:%d: tr journal end looks bad: 0x%llx\n", __FILE__, __LINE__, tr->journal_end); \
+       }                                                               \
+       if (tr->blhdr && (tr->blhdr->max_blocks <= 0 || tr->blhdr->max_blocks > (tr->jnl->jhdr->size/tr->jnl->jhdr->jhdr_size))) { \
+               panic("%s:%d: tr blhdr max_blocks looks bad: %d\n", __FILE__, __LINE__, tr->blhdr->max_blocks); \
+       }                                                               \
+       } while(0)
 
 
 
@@ -172,17 +248,18 @@ static int insert_block(journal *jnl, struct bucket **buf_ptr, int blk_index, of
 // we use it to checksum the journal header and the block list
 // headers that are at the start of each transaction.
 //
-static int
+static unsigned int
 calc_checksum(char *ptr, int len)
 {
-    int i, cksum=0;
+       int i;
+       unsigned int cksum=0;
 
-    // this is a lame checksum but for now it'll do
-    for(i=0; i < len; i++, ptr++) {
+       // this is a lame checksum but for now it'll do
+       for(i = 0; i < len; i++, ptr++) {
                cksum = (cksum << 8) ^ (cksum + *(unsigned char *)ptr);
-    }
+       }
 
-    return (~cksum);
+       return (~cksum);
 }
 
 //
@@ -193,14 +270,11 @@ lck_attr_t *      jnl_lock_attr;
 lck_grp_t *       jnl_mutex_group;
 
 void
-journal_init()
+journal_init(void)
 {
        jnl_lock_attr    = lck_attr_alloc_init();
        jnl_group_attr   = lck_grp_attr_alloc_init();
        jnl_mutex_group  = lck_grp_alloc_init("jnl-mutex", jnl_group_attr);
-
-       /* Turn on lock debugging */
-       //lck_attr_setdebug(jnl_lock_attr);
 }
 
 static __inline__ void
@@ -215,6 +289,18 @@ unlock_journal(journal *jnl)
        lck_mtx_unlock(&jnl->jlock);
 }
 
+static __inline__ void
+lock_flush(journal *jnl)
+{
+       lck_mtx_lock(&jnl->flock);
+}
+
+static __inline__ void
+unlock_flush(journal *jnl)
+{
+       lck_mtx_unlock(&jnl->flock);
+}
+
 static __inline__ void
 lock_oldstart(journal *jnl)
 {
@@ -245,72 +331,80 @@ unlock_oldstart(journal *jnl)
 static size_t
 do_journal_io(journal *jnl, off_t *offset, void *data, size_t len, int direction)
 {
-    int         err, io_sz=0, curlen=len;
-    buf_t      bp;
-    int        max_iosize = 128 * 1024;
-    struct vfsioattr ioattr;
+       int     err, curlen=len;
+       size_t  io_sz = 0;
+       buf_t   bp;
+       off_t   max_iosize;
 
-    if (*offset < 0 || *offset > jnl->jhdr->size) {
+       if (*offset < 0 || *offset > jnl->jhdr->size) {
                panic("jnl: do_jnl_io: bad offset 0x%llx (max 0x%llx)\n", *offset, jnl->jhdr->size);
-    }
-    vfs_ioattr(vnode_mount(jnl->jdev), &ioattr);
-
-    if (direction & JNL_WRITE)
-            max_iosize = ioattr.io_maxwritecnt;
-    else if (direction & JNL_READ)
-            max_iosize = ioattr.io_maxreadcnt;
+       }
+       
+       if (direction & JNL_WRITE)
+               max_iosize = jnl->max_write_size;
+       else if (direction & JNL_READ)
+               max_iosize = jnl->max_read_size;
+       else
+               max_iosize = 128 * 1024;
 
-  again:
-    bp = alloc_io_buf(jnl->jdev, 1);
+again:
+       bp = alloc_io_buf(jnl->jdev, 1);
 
-    if (*offset + (off_t)curlen > jnl->jhdr->size && *offset != 0 && jnl->jhdr->size != 0) {
+       if (*offset + (off_t)curlen > jnl->jhdr->size && *offset != 0 && jnl->jhdr->size != 0) {
                if (*offset == jnl->jhdr->size) {
                        *offset = jnl->jhdr->jhdr_size;
                } else {
                        curlen = (off_t)jnl->jhdr->size - *offset;
                }
-    }
+       }
 
        if (curlen > max_iosize) {
                curlen = max_iosize;
        }
 
-    if (curlen <= 0) {
-               panic("jnl: do_jnl_io: curlen == %d, offset 0x%llx len %d\n", curlen, *offset, len);
-    }
+       if (curlen <= 0) {
+               panic("jnl: do_jnl_io: curlen == %d, offset 0x%llx len %zd\n", curlen, *offset, len);
+       }
 
        if (*offset == 0 && (direction & JNL_HEADER) == 0) {
                panic("jnl: request for i/o to jnl-header without JNL_HEADER flag set! (len %d, data %p)\n", curlen, data);
        }
 
-    if (direction & JNL_READ)
-            buf_setflags(bp, B_READ);
-    else {
-            /*
-            * don't have to set any flags
-            */
-            vnode_startwrite(jnl->jdev);
-    }
-    buf_setsize(bp, curlen);
-    buf_setcount(bp, curlen);
-    buf_setdataptr(bp, (uintptr_t)data);
-    buf_setblkno(bp, (daddr64_t) ((jnl->jdev_offset + *offset) / (off_t)jnl->jhdr->jhdr_size));
-    buf_setlblkno(bp, (daddr64_t) ((jnl->jdev_offset + *offset) / (off_t)jnl->jhdr->jhdr_size));
-
-    err = VNOP_STRATEGY(bp);
-    if (!err) {
+       if (direction & JNL_READ)
+               buf_setflags(bp, B_READ);
+       else {
+               /*
+                * don't have to set any flags
+                */
+               vnode_startwrite(jnl->jdev);
+       }
+       buf_setsize(bp, curlen);
+       buf_setcount(bp, curlen);
+       buf_setdataptr(bp, (uintptr_t)data);
+       buf_setblkno(bp, (daddr64_t) ((jnl->jdev_offset + *offset) / (off_t)jnl->jhdr->jhdr_size));
+       buf_setlblkno(bp, (daddr64_t) ((jnl->jdev_offset + *offset) / (off_t)jnl->jhdr->jhdr_size));
+
+       if ((direction & JNL_WRITE) && (jnl->flags & JOURNAL_DO_FUA_WRITES)) {
+               buf_markfua(bp);
+       }
+
+       DTRACE_IO1(journal__start, buf_t, bp);
+       err = VNOP_STRATEGY(bp);
+       if (!err) {
                err = (int)buf_biowait(bp);
-    }
-    free_io_buf(bp);
+       }
+       DTRACE_IO1(journal__done, buf_t, bp);
+       free_io_buf(bp);
 
-    if (err) {
-               printf("jnl: do_jnl_io: strategy err 0x%x\n", err);
+       if (err) {
+               printf("jnl: %s: do_jnl_io: strategy err 0x%x\n", jnl->jdev_name, err);
                return 0;
-    }
+       }
 
-    *offset += curlen;
-    io_sz   += curlen;
-    if (io_sz != len) {
+       *offset += curlen;
+       io_sz   += curlen;
+
+       if (io_sz != len) {
                // handle wrap-around
                data    = (char *)data + curlen;
                curlen  = len - io_sz;
@@ -318,25 +412,25 @@ do_journal_io(journal *jnl, off_t *offset, void *data, size_t len, int direction
                        *offset = jnl->jhdr->jhdr_size;
                }
                goto again;
-    }
+       }
 
-    return io_sz;
+       return io_sz;
 }
 
 static size_t
 read_journal_data(journal *jnl, off_t *offset, void *data, size_t len)
 {
-    return do_journal_io(jnl, offset, data, len, JNL_READ);
+       return do_journal_io(jnl, offset, data, len, JNL_READ);
 }
 
 static size_t
 write_journal_data(journal *jnl, off_t *offset, void *data, size_t len)
 {
-    return do_journal_io(jnl, offset, data, len, JNL_WRITE);
+       return do_journal_io(jnl, offset, data, len, JNL_WRITE);
 }
 
 
-static int
+static size_t
 read_journal_header(journal *jnl, void *data, size_t len)
 {
        off_t hdr_offset = 0;
@@ -345,59 +439,66 @@ read_journal_header(journal *jnl, void *data, size_t len)
 }
 
 static int
-write_journal_header(journal *jnl)
+write_journal_header(journal *jnl, int updating_start, uint32_t sequence_num)
 {
        static int num_err_prints = 0;
-    int ret;
-    off_t jhdr_offset = 0;
-    struct vfs_context context;
-
-    context.vc_proc = current_proc();
-    context.vc_ucred = NOCRED;
-    // 
-    // XXXdbg note: this ioctl doesn't seem to do anything on firewire disks.
-    //
-    ret = VNOP_IOCTL(jnl->jdev, DKIOCSYNCHRONIZECACHE, NULL, FWRITE, &context);
-    if (ret != 0) {
-       //
-       // Only print this error if it's a different error than the
-       // previous one, or if it's the first time for this device
-       // or if the total number of printfs is less than 25.  We
-       // allow for up to 25 printfs to insure that some make it
-       // into the on-disk syslog.  Otherwise if we only printed
-       // one, it's possible it would never make it to the syslog
-       // for the root volume and that makes debugging hard.
+       int ret=0;
+       off_t jhdr_offset = 0;
+       struct vfs_context context;
+
+       context.vc_thread = current_thread();
+       context.vc_ucred = NOCRED;
+       // 
+       // Flush the track cache if we're not doing force-unit-access
+       // writes.
        //
-       if (   ret != jnl->last_flush_err
-           || (jnl->flags & JOURNAL_FLUSHCACHE_ERR) == 0
-           || num_err_prints++ < 25) {
+       if (!updating_start && (jnl->flags & JOURNAL_DO_FUA_WRITES) == 0) {
+               ret = VNOP_IOCTL(jnl->jdev, DKIOCSYNCHRONIZECACHE, NULL, FWRITE, &context);
+       }
+       if (ret != 0) {
+               //
+               // Only print this error if it's a different error than the
+               // previous one, or if it's the first time for this device
+               // or if the total number of printfs is less than 25.  We
+               // allow for up to 25 printfs to insure that some make it
+               // into the on-disk syslog.  Otherwise if we only printed
+               // one, it's possible it would never make it to the syslog
+               // for the root volume and that makes debugging hard.
+               //
+               if (   ret != jnl->last_flush_err
+                      || (jnl->flags & JOURNAL_FLUSHCACHE_ERR) == 0
+                      || num_err_prints++ < 25) {
            
-           printf("jnl: flushing fs disk buffer returned 0x%x\n", ret);
+                       printf("jnl: %s: flushing fs disk buffer returned 0x%x\n", jnl->jdev_name, ret);
            
-           jnl->flags |= JOURNAL_FLUSHCACHE_ERR;
-           jnl->last_flush_err = ret;
+                       jnl->flags |= JOURNAL_FLUSHCACHE_ERR;
+                       jnl->last_flush_err = ret;
+               }
        }
-    }
 
-    
-    jnl->jhdr->checksum = 0;
-    jnl->jhdr->checksum = calc_checksum((char *)jnl->jhdr, sizeof(struct journal_header));
-    if (do_journal_io(jnl, &jhdr_offset, jnl->header_buf, jnl->jhdr->jhdr_size, JNL_WRITE|JNL_HEADER) != jnl->jhdr->jhdr_size) {
-       printf("jnl: write_journal_header: error writing the journal header!\n");
-       jnl->flags |= JOURNAL_INVALID;
-       return -1;
-    }  
-
-    // Have to flush after writing the journal header so that
-    // a future transaction doesn't sneak out to disk before
-    // the header does and thus overwrite data that the old
-    // journal header refers to.  Saw this exact case happen
-    // on an IDE bus analyzer with Larry Barras so while it
-    // may seem obscure, it's not.
-    //
-    VNOP_IOCTL(jnl->jdev, DKIOCSYNCHRONIZECACHE, NULL, FWRITE, &context);
+       jnl->jhdr->sequence_num = sequence_num;
+       jnl->jhdr->checksum = 0;
+       jnl->jhdr->checksum = calc_checksum((char *)jnl->jhdr, JOURNAL_HEADER_CKSUM_SIZE);
 
-    return 0;
+       if (do_journal_io(jnl, &jhdr_offset, jnl->header_buf, jnl->jhdr->jhdr_size, JNL_WRITE|JNL_HEADER) != (size_t)jnl->jhdr->jhdr_size) {
+               printf("jnl: %s: write_journal_header: error writing the journal header!\n", jnl->jdev_name);
+               jnl->flags |= JOURNAL_INVALID;
+               return -1;
+       }       
+
+       // If we're not doing force-unit-access writes, then we
+       // have to flush after writing the journal header so that
+       // a future transaction doesn't sneak out to disk before
+       // the header does and thus overwrite data that the old
+       // journal header refers to.  Saw this exact case happen
+       // on an IDE bus analyzer with Larry Barras so while it
+       // may seem obscure, it's not.
+       //
+       if (updating_start && (jnl->flags & JOURNAL_DO_FUA_WRITES) == 0) {
+               VNOP_IOCTL(jnl->jdev, DKIOCSYNCHRONIZECACHE, NULL, FWRITE, &context);
+       }
+
+       return 0;
 }
 
 
@@ -413,18 +514,29 @@ write_journal_header(journal *jnl)
 static void
 free_old_stuff(journal *jnl)
 {
-    transaction *tr, *next;
+       transaction *tr, *next;
+       block_list_header  *blhdr=NULL, *next_blhdr=NULL;
 
-    lock_oldstart(jnl);
-    tr = jnl->tr_freeme;
-    jnl->tr_freeme = NULL;
-    unlock_oldstart(jnl);
+       if (jnl->tr_freeme == NULL)
+               return;
 
-    for(; tr; tr=next) {
-       next = tr->next;
-       FREE_ZONE(tr, sizeof(transaction), M_JNL_TR);
-    }
+       lock_oldstart(jnl);
+       tr = jnl->tr_freeme;
+       jnl->tr_freeme = NULL;
+       unlock_oldstart(jnl);
 
+       for(; tr; tr=next) {
+               for (blhdr = tr->blhdr; blhdr; blhdr = next_blhdr) {
+                       next_blhdr = (block_list_header *)((long)blhdr->binfo[0].bnum);
+                       blhdr->binfo[0].bnum = 0xdeadc0de;
+                   
+                       kmem_free(kernel_map, (vm_offset_t)blhdr, tr->tbuffer_size);
+
+                       KERNEL_DEBUG(0xbbbbc01c, jnl, tr, tr->tbuffer_size, 0, 0);
+               }
+               next = tr->next;
+               FREE_ZONE(tr, sizeof(transaction), M_JNL_TR);
+       }
 }
 
 
@@ -438,86 +550,99 @@ free_old_stuff(journal *jnl)
 static void
 buffer_flushed_callback(struct buf *bp, void *arg)
 {
-    transaction  *tr;
-    journal      *jnl;
-    transaction  *ctr, *prev=NULL, *next;
-    int           i, bufsize;
+       transaction  *tr;
+       journal      *jnl;
+       transaction  *ctr, *prev=NULL, *next;
+       size_t        i;
+       int           bufsize, amt_flushed, total_bytes;
 
 
-    //printf("jnl: buf flush: bp @ 0x%x l/blkno %qd/%qd vp 0x%x tr @ 0x%x\n",
-    //    bp, buf_lblkno(bp), buf_blkno(bp), buf_vnode(bp), arg);
+       //printf("jnl: buf flush: bp @ 0x%x l/blkno %qd/%qd vp 0x%x tr @ 0x%x\n",
+       //         bp, buf_lblkno(bp), buf_blkno(bp), buf_vnode(bp), arg);
 
-    // snarf out the bits we want
-    bufsize = buf_size(bp);
-    tr      = (transaction *)arg;
+       // snarf out the bits we want
+       bufsize = buf_size(bp);
+       tr      = (transaction *)arg;
 
-    // then we've already seen it
-    if (tr == NULL) {
+       // then we've already seen it
+       if (tr == NULL) {
                return;
-    }
+       }
 
-    CHECK_TRANSACTION(tr);
+       CHECK_TRANSACTION(tr);
 
-    jnl = tr->jnl;
-    if (jnl->flags & JOURNAL_INVALID) {
+       jnl = tr->jnl;
+       if (jnl->flags & JOURNAL_INVALID) {
                return;
-    }
+       }
 
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
 
-    // update the number of blocks that have been flushed.
-    // this buf may represent more than one block so take
-    // that into account.
-    OSAddAtomic(bufsize, &tr->num_flushed);
+       amt_flushed = tr->num_killed;
+       total_bytes = tr->total_bytes;
+    
+       // update the number of blocks that have been flushed.
+       // this buf may represent more than one block so take
+       // that into account.
+       //
+       // OSAddAtomic() returns the value of tr->num_flushed before the add
+       //
+       amt_flushed += OSAddAtomic(bufsize, &tr->num_flushed);
 
 
-    // if this transaction isn't done yet, just return as
-    // there is nothing to do.
-    if ((tr->num_flushed + tr->num_killed) < tr->total_bytes) {
+       // if this transaction isn't done yet, just return as
+       // there is nothing to do.
+       //
+       // NOTE: we are careful to not reference anything through
+       //       the tr pointer after doing the OSAddAtomic().  if
+       //       this if statement fails then we are the last one
+       //       and then it's ok to dereference "tr".
+       //
+       if ((amt_flushed + bufsize) < total_bytes) {
                return;
-    }
+       }
 
        // this will single thread checking the transaction
        lock_oldstart(jnl);
 
-       if (tr->total_bytes == 0xfbadc0de) {
+       if (tr->total_bytes == (int)0xfbadc0de) {
                // then someone beat us to it...
                unlock_oldstart(jnl);
                return;
        }
 
-    // mark this so that we're the owner of dealing with the
+       // mark this so that we're the owner of dealing with the
        // cleanup for this transaction
-    tr->total_bytes = 0xfbadc0de;
+       tr->total_bytes = 0xfbadc0de;
 
-    //printf("jnl: tr 0x%x (0x%llx 0x%llx) in jnl 0x%x completed.\n",
-    //   tr, tr->journal_start, tr->journal_end, jnl);
+       //printf("jnl: tr 0x%x (0x%llx 0x%llx) in jnl 0x%x completed.\n",
+       //   tr, tr->journal_start, tr->journal_end, jnl);
 
        // find this entry in the old_start[] index and mark it completed
-       for(i=0; i < sizeof(jnl->old_start)/sizeof(jnl->old_start[0]); i++) {
-
-               if ((jnl->old_start[i] & ~(0x8000000000000000LL)) == tr->journal_start) {
-                       jnl->old_start[i] &= ~(0x8000000000000000LL);
+       for(i = 0; i < sizeof(jnl->old_start)/sizeof(jnl->old_start[0]); i++) {
+       
+               if ((off_t)(jnl->old_start[i] & ~(0x8000000000000000ULL)) == tr->journal_start) {
+                       jnl->old_start[i] &= ~(0x8000000000000000ULL);
                        break;
                }
        }
+
        if (i >= sizeof(jnl->old_start)/sizeof(jnl->old_start[0])) {
-               panic("jnl: buffer_flushed: did not find tr w/start @ %lld (tr 0x%x, jnl 0x%x)\n",
-                         tr->journal_start, tr, jnl);
+               panic("jnl: buffer_flushed: did not find tr w/start @ %lld (tr %p, jnl %p)\n",
+                     tr->journal_start, tr, jnl);
        }
-       unlock_oldstart(jnl);
 
 
-    // if we are here then we need to update the journal header
-    // to reflect that this transaction is complete
-    if (tr->journal_start == jnl->active_start) {
+       // if we are here then we need to update the journal header
+       // to reflect that this transaction is complete
+       if (tr->journal_start == jnl->active_start) {
                jnl->active_start = tr->journal_end;
                tr->journal_start = tr->journal_end = (off_t)0;
-    }
+       }
 
-    // go through the completed_trs list and try to coalesce
-    // entries, restarting back at the beginning if we have to.
-    for(ctr=jnl->completed_trs; ctr; prev=ctr, ctr=next) {
+       // go through the completed_trs list and try to coalesce
+       // entries, restarting back at the beginning if we have to.
+       for (ctr = jnl->completed_trs; ctr; prev=ctr, ctr=next) {
                if (ctr->journal_start == jnl->active_start) {
                        jnl->active_start = ctr->journal_end;
                        if (prev) {
@@ -527,12 +652,10 @@ buffer_flushed_callback(struct buf *bp, void *arg)
                                jnl->completed_trs = ctr->next;
                        }
            
-                       lock_oldstart(jnl);
                        next           = jnl->completed_trs;   // this starts us over again
                        ctr->next      = jnl->tr_freeme;
                        jnl->tr_freeme = ctr;
                        ctr            = NULL;
-                       unlock_oldstart(jnl);
                } else if (tr->journal_end == ctr->journal_start) {
                        ctr->journal_start = tr->journal_start;
                        next               = jnl->completed_trs;  // this starts us over again
@@ -542,21 +665,32 @@ buffer_flushed_callback(struct buf *bp, void *arg)
                        ctr->journal_end  = tr->journal_end;
                        next              = ctr->next;
                        tr->journal_start = tr->journal_end = (off_t)0;
+               } else if (ctr->next && ctr->journal_end == ctr->next->journal_start) {
+                       // coalesce the next entry with this one and link the next
+                       // entry in at the head of the tr_freeme list
+                       next              = ctr->next;           // temporarily use the "next" variable
+                       ctr->journal_end  = next->journal_end;
+                       ctr->next         = next->next;
+                       next->next        = jnl->tr_freeme;      // link in the next guy at the head of the tr_freeme list
+                       jnl->tr_freeme    = next;
+
+                       next              = jnl->completed_trs;  // this starts us over again
+                       ctr               = NULL;
                } else {
                        next = ctr->next;
                }
-    }
+       }
     
-    // if this is true then we didn't merge with anyone
-    // so link ourselves in at the head of the completed
-    // transaction list.
-    if (tr->journal_start != 0) {
+       // if this is true then we didn't merge with anyone
+       // so link ourselves in at the head of the completed
+       // transaction list.
+       if (tr->journal_start != 0) {
                // put this entry into the correct sorted place
                // in the list instead of just at the head.
                //
        
                prev = NULL;
-               for(ctr=jnl->completed_trs; ctr && tr->journal_start > ctr->journal_start; prev=ctr, ctr=ctr->next) {
+               for (ctr = jnl->completed_trs; ctr && tr->journal_start > ctr->journal_start; prev=ctr, ctr=ctr->next) {
                        // just keep looping
                }
 
@@ -570,14 +704,15 @@ buffer_flushed_callback(struct buf *bp, void *arg)
                        tr->next = prev->next;
                        prev->next = tr;
                }
-    } else {
+       } else {
                // if we're here this tr got merged with someone else so
                // put it on the list to be free'd
-               lock_oldstart(jnl);
                tr->next       = jnl->tr_freeme;
                jnl->tr_freeme = tr;
-               unlock_oldstart(jnl);
-    }
+       }
+       unlock_oldstart(jnl);
+
+       unlock_condition(jnl, &jnl->asyncIO);
 }
 
 
@@ -591,50 +726,51 @@ buffer_flushed_callback(struct buf *bp, void *arg)
 static void
 swap_journal_header(journal *jnl)
 {
-    jnl->jhdr->magic      = SWAP32(jnl->jhdr->magic);
-    jnl->jhdr->endian     = SWAP32(jnl->jhdr->endian);
-    jnl->jhdr->start      = SWAP64(jnl->jhdr->start);
-    jnl->jhdr->end        = SWAP64(jnl->jhdr->end);
-    jnl->jhdr->size       = SWAP64(jnl->jhdr->size);
-    jnl->jhdr->blhdr_size = SWAP32(jnl->jhdr->blhdr_size);
-    jnl->jhdr->checksum   = SWAP32(jnl->jhdr->checksum);
-    jnl->jhdr->jhdr_size  = SWAP32(jnl->jhdr->jhdr_size);
+       jnl->jhdr->magic      = SWAP32(jnl->jhdr->magic);
+       jnl->jhdr->endian     = SWAP32(jnl->jhdr->endian);
+       jnl->jhdr->start      = SWAP64(jnl->jhdr->start);
+       jnl->jhdr->end        = SWAP64(jnl->jhdr->end);
+       jnl->jhdr->size       = SWAP64(jnl->jhdr->size);
+       jnl->jhdr->blhdr_size = SWAP32(jnl->jhdr->blhdr_size);
+       jnl->jhdr->checksum   = SWAP32(jnl->jhdr->checksum);
+       jnl->jhdr->jhdr_size  = SWAP32(jnl->jhdr->jhdr_size);
+       jnl->jhdr->sequence_num  = SWAP32(jnl->jhdr->sequence_num);
 }
 
 static void
 swap_block_list_header(journal *jnl, block_list_header *blhdr)
 {
-    int i;
+       int i;
     
-    blhdr->max_blocks = SWAP16(blhdr->max_blocks);
-    blhdr->num_blocks = SWAP16(blhdr->num_blocks);
-    blhdr->bytes_used = SWAP32(blhdr->bytes_used);
-    blhdr->checksum   = SWAP32(blhdr->checksum);
-    blhdr->pad        = SWAP32(blhdr->pad);
-
-       if (blhdr->num_blocks * sizeof(blhdr->binfo[0]) > jnl->jhdr->blhdr_size) {
-               printf("jnl: blhdr num blocks looks suspicious (%d).  not swapping.\n", blhdr->num_blocks);
+       blhdr->max_blocks = SWAP16(blhdr->max_blocks);
+       blhdr->num_blocks = SWAP16(blhdr->num_blocks);
+       blhdr->bytes_used = SWAP32(blhdr->bytes_used);
+       blhdr->checksum   = SWAP32(blhdr->checksum);
+       blhdr->flags      = SWAP32(blhdr->flags);
+
+       if (blhdr->num_blocks >= ((jnl->jhdr->blhdr_size / sizeof(block_info)) - 1)) {
+               printf("jnl: %s: blhdr num blocks looks suspicious (%d / blhdr size %d).  not swapping.\n", jnl->jdev_name, blhdr->num_blocks, jnl->jhdr->blhdr_size);
                return;
        }
 
-    for(i=0; i < blhdr->num_blocks; i++) {
-               blhdr->binfo[i].bnum  = SWAP64(blhdr->binfo[i].bnum);
-               blhdr->binfo[i].bsize = SWAP32(blhdr->binfo[i].bsize);
-               blhdr->binfo[i].bp    = (void *)SWAP32((int)blhdr->binfo[i].bp);
-    }
+       for(i = 0; i < blhdr->num_blocks; i++) {
+               blhdr->binfo[i].bnum    = SWAP64(blhdr->binfo[i].bnum);
+               blhdr->binfo[i].u.bi.bsize   = SWAP32(blhdr->binfo[i].u.bi.bsize);
+               blhdr->binfo[i].u.bi.b.cksum = SWAP32(blhdr->binfo[i].u.bi.b.cksum);
+       }
 }
 
 
 static int
 update_fs_block(journal *jnl, void *block_ptr, off_t fs_block, size_t bsize)
 {
-    int                ret;
-    struct buf *oblock_bp=NULL;
+       int             ret;
+       struct buf *oblock_bp=NULL;
     
-    // first read the block we want.
-    ret = buf_meta_bread(jnl->fsdev, (daddr64_t)fs_block, bsize, NOCRED, &oblock_bp);
-    if (ret != 0) {
-               printf("jnl: update_fs_block: error reading fs block # %lld! (ret %d)\n", fs_block, ret);
+       // first read the block we want.
+       ret = buf_meta_bread(jnl->fsdev, (daddr64_t)fs_block, bsize, NOCRED, &oblock_bp);
+       if (ret != 0) {
+               printf("jnl: %s: update_fs_block: error reading fs block # %lld! (ret %d)\n", jnl->jdev_name, fs_block, ret);
 
                if (oblock_bp) {
                        buf_brelse(oblock_bp);
@@ -644,272 +780,277 @@ update_fs_block(journal *jnl, void *block_ptr, off_t fs_block, size_t bsize)
                // let's try to be aggressive here and just re-write the block
                oblock_bp = buf_getblk(jnl->fsdev, (daddr64_t)fs_block, bsize, 0, 0, BLK_META);
                if (oblock_bp == NULL) {
-                       printf("jnl: update_fs_block: buf_getblk() for %lld failed! failing update.\n", fs_block);
+                       printf("jnl: %s: update_fs_block: buf_getblk() for %lld failed! failing update.\n", jnl->jdev_name, fs_block);
                        return -1;
                }
-    }
+       }
            
-    // make sure it's the correct size.
-    if (buf_size(oblock_bp) != bsize) {
+       // make sure it's the correct size.
+       if (buf_size(oblock_bp) != bsize) {
                buf_brelse(oblock_bp);
                return -1;
-    }
+       }
 
-    // copy the journal data over top of it
-    memcpy((void *)buf_dataptr(oblock_bp), block_ptr, bsize);
+       // copy the journal data over top of it
+       memcpy((char *)buf_dataptr(oblock_bp), block_ptr, bsize);
 
-    if ((ret = VNOP_BWRITE(oblock_bp)) != 0) {
-               printf("jnl: update_fs_block: failed to update block %lld (ret %d)\n", fs_block,ret);
+       if ((ret = VNOP_BWRITE(oblock_bp)) != 0) {
+               printf("jnl: %s: update_fs_block: failed to update block %lld (ret %d)\n", jnl->jdev_name, fs_block,ret);
                return ret;
-    }
+       }
 
-    // and now invalidate it so that if someone else wants to read
-    // it in a different size they'll be able to do it.
-    ret = buf_meta_bread(jnl->fsdev, (daddr64_t)fs_block, bsize, NOCRED, &oblock_bp);
-    if (oblock_bp) {
+       // and now invalidate it so that if someone else wants to read
+       // it in a different size they'll be able to do it.
+       ret = buf_meta_bread(jnl->fsdev, (daddr64_t)fs_block, bsize, NOCRED, &oblock_bp);
+       if (oblock_bp) {
                 buf_markinvalid(oblock_bp);
                buf_brelse(oblock_bp);
-    }
+       }
            
-    return 0;
+       return 0;
 }
 
 static int
 grow_table(struct bucket **buf_ptr, int num_buckets, int new_size)
 {
-    struct bucket *newBuf;
-    int current_size = num_buckets, i;
+       struct bucket *newBuf;
+       int current_size = num_buckets, i;
     
-    // return if newsize is less than the current size
-    if (new_size < num_buckets) {
-       return current_size;
-    }
+       // return if newsize is less than the current size
+       if (new_size < num_buckets) {
+               return current_size;
+       }
     
-    if ((MALLOC(newBuf, struct bucket *, new_size*sizeof(struct bucket), M_TEMP, M_WAITOK)) == NULL) {
-       printf("jnl: grow_table: no memory to expand coalesce buffer!\n");
-       return -1;
-    }
+       if ((MALLOC(newBuf, struct bucket *, new_size*sizeof(struct bucket), M_TEMP, M_WAITOK)) == NULL) {
+               printf("jnl: grow_table: no memory to expand coalesce buffer!\n");
+               return -1;
+       }
     
-    //  printf("jnl: lookup_bucket: expanded co_buf to %d elems\n", new_size);
+       //  printf("jnl: lookup_bucket: expanded co_buf to %d elems\n", new_size);
     
-    // copy existing elements 
-    bcopy(*buf_ptr, newBuf, num_buckets*sizeof(struct bucket));
+       // copy existing elements 
+       bcopy(*buf_ptr, newBuf, num_buckets*sizeof(struct bucket));
     
-    // initialize the new ones
-    for(i=num_buckets; i < new_size; i++) {
-       newBuf[i].block_num = (off_t)-1;
-    }
+       // initialize the new ones
+       for(i = num_buckets; i < new_size; i++) {
+               newBuf[i].block_num = (off_t)-1;
+       }
     
-    // free the old container
-    FREE(*buf_ptr, M_TEMP);
+       // free the old container
+       FREE(*buf_ptr, M_TEMP);
     
-    // reset the buf_ptr
-    *buf_ptr = newBuf;
+       // reset the buf_ptr
+       *buf_ptr = newBuf;
     
-    return new_size;
+       return new_size;
 }
 
 static int
 lookup_bucket(struct bucket **buf_ptr, off_t block_num, int num_full)
 {
-    int lo, hi, index, matches, i;
+       int lo, hi, index, matches, i;
     
-    if (num_full == 0) {
-       return 0; // table is empty, so insert at index=0
-    }
+       if (num_full == 0) {
+               return 0; // table is empty, so insert at index=0
+       }
     
-    lo = 0;
-    hi = num_full - 1;
-    index = -1;
+       lo = 0;
+       hi = num_full - 1;
+       index = -1;
     
-    // perform binary search for block_num
-    do {
-       int mid = (hi - lo)/2 + lo;
-       off_t this_num = (*buf_ptr)[mid].block_num;
+       // perform binary search for block_num
+       do {
+               int mid = (hi - lo)/2 + lo;
+               off_t this_num = (*buf_ptr)[mid].block_num;
        
-       if (block_num == this_num) {
-           index = mid;
-           break;
-       }
+               if (block_num == this_num) {
+                       index = mid;
+                       break;
+               }
        
-       if (block_num < this_num) {
-           hi = mid;
-           continue;
-       }
+               if (block_num < this_num) {
+                       hi = mid;
+                       continue;
+               }
        
-       if (block_num > this_num) {
-           lo = mid + 1;
-           continue;
-       }
-    } while(lo < hi);
+               if (block_num > this_num) {
+                       lo = mid + 1;
+                       continue;
+               }
+       } while (lo < hi);
     
-    // check if lo and hi converged on the match
-    if (block_num == (*buf_ptr)[hi].block_num) {
-       index = hi;
-    }
+       // check if lo and hi converged on the match
+       if (block_num == (*buf_ptr)[hi].block_num) {
+               index = hi;
+       }
     
-    // if no existing entry found, find index for new one
-    if (index == -1) {
-       index = (block_num < (*buf_ptr)[hi].block_num) ? hi : hi + 1;
-    } else {
-       // make sure that we return the right-most index in the case of multiple matches
-       matches = 0;
-       i = index + 1;
-       while(i < num_full && block_num == (*buf_ptr)[i].block_num) {
-           matches++;
-           i++;
-       }
-
-       index += matches;
-    }
+       // if no existing entry found, find index for new one
+       if (index == -1) {
+               index = (block_num < (*buf_ptr)[hi].block_num) ? hi : hi + 1;
+       } else {
+               // make sure that we return the right-most index in the case of multiple matches
+               matches = 0;
+               i = index + 1;
+               while (i < num_full && block_num == (*buf_ptr)[i].block_num) {
+                       matches++;
+                       i++;
+               }
+
+               index += matches;
+       }
     
-    return index;
+       return index;
 }
 
 static int
-insert_block(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t num, size_t size, size_t offset, int *num_buckets_ptr, int *num_full_ptr, int overwriting)
+insert_block(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t num, size_t size, size_t offset, int32_t cksum, int *num_buckets_ptr, int *num_full_ptr, int overwriting)
 {
-    if (!overwriting) {
-       // grow the table if we're out of space
-       if (*num_full_ptr >= *num_buckets_ptr) {
-           int new_size = *num_buckets_ptr * 2;
-           int grow_size = grow_table(buf_ptr, *num_buckets_ptr, new_size);
+       if (!overwriting) {
+               // grow the table if we're out of space
+               if (*num_full_ptr >= *num_buckets_ptr) {
+                       int new_size = *num_buckets_ptr * 2;
+                       int grow_size = grow_table(buf_ptr, *num_buckets_ptr, new_size);
            
-           if (grow_size < new_size) {
-               printf("jnl: add_block: grow_table returned an error!\n");
-               return -1;
-           }
+                       if (grow_size < new_size) {
+                               printf("jnl: %s: add_block: grow_table returned an error!\n", jnl->jdev_name);
+                               return -1;
+                       }
            
-           *num_buckets_ptr = grow_size; //update num_buckets to reflect the new size
-       }
+                       *num_buckets_ptr = grow_size; //update num_buckets to reflect the new size
+               }
        
-       // if we're not inserting at the end, we need to bcopy
-       if (blk_index != *num_full_ptr) {
-           bcopy( (*buf_ptr)+(blk_index), (*buf_ptr)+(blk_index+1), (*num_full_ptr-blk_index)*sizeof(struct bucket) );
-       }
+               // if we're not inserting at the end, we need to bcopy
+               if (blk_index != *num_full_ptr) {
+                       bcopy( (*buf_ptr)+(blk_index), (*buf_ptr)+(blk_index+1), (*num_full_ptr-blk_index)*sizeof(struct bucket) );
+               }
        
-       (*num_full_ptr)++; // increment only if we're not overwriting
-    }
-
-    // sanity check the values we're about to add
-    if (offset >= jnl->jhdr->size) {
-       offset = jnl->jhdr->jhdr_size + (offset - jnl->jhdr->size);
-    }
-    if (size <= 0) {
-       panic("jnl: insert_block: bad size in insert_block (%d)\n", size);
-    }   
-
-    (*buf_ptr)[blk_index].block_num = num;
-    (*buf_ptr)[blk_index].block_size = size;
-    (*buf_ptr)[blk_index].jnl_offset = offset;
+               (*num_full_ptr)++; // increment only if we're not overwriting
+       }
+
+       // sanity check the values we're about to add
+       if ((off_t)offset >= jnl->jhdr->size) {
+               offset = jnl->jhdr->jhdr_size + (offset - jnl->jhdr->size);
+       }
+       if (size <= 0) {
+               panic("jnl: insert_block: bad size in insert_block (%zd)\n", size);
+       }        
+
+       (*buf_ptr)[blk_index].block_num = num;
+       (*buf_ptr)[blk_index].block_size = size;
+       (*buf_ptr)[blk_index].jnl_offset = offset;
+       (*buf_ptr)[blk_index].cksum = cksum;
     
-    return blk_index;
+       return blk_index;
 }
 
 static int
-do_overlap(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t block_num, size_t size, size_t offset, int *num_buckets_ptr, int *num_full_ptr)
-{
-    int num_to_remove, index, i, overwrite, err;
-    size_t jhdr_size = jnl->jhdr->jhdr_size, new_offset;
-    off_t overlap, block_start, block_end;
-
-    block_start = block_num*jhdr_size;
-    block_end = block_start + size;
-    overwrite = (block_num == (*buf_ptr)[blk_index].block_num && size >= (*buf_ptr)[blk_index].block_size);
-
-    // first, eliminate any overlap with the previous entry
-    if (blk_index != 0 && !overwrite) {
-       off_t prev_block_start = (*buf_ptr)[blk_index-1].block_num*jhdr_size;
-       off_t prev_block_end = prev_block_start + (*buf_ptr)[blk_index-1].block_size;
-       overlap = prev_block_end - block_start;
-       if (overlap > 0) {
-           if (overlap % jhdr_size != 0) {
-               panic("jnl: do_overlap: overlap with previous entry not a multiple of %d\n", jhdr_size);
-           }
-
-           // if the previous entry completely overlaps this one, we need to break it into two pieces.
-           if (prev_block_end > block_end) {
-               off_t new_num = block_end / jhdr_size;
-               size_t new_size = prev_block_end - block_end;
-
-               new_offset = (*buf_ptr)[blk_index-1].jnl_offset + (block_end - prev_block_start);
+do_overlap(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t block_num, size_t size, __unused size_t offset, int32_t cksum, int *num_buckets_ptr, int *num_full_ptr)
+{
+       int     num_to_remove, index, i, overwrite, err;
+       size_t  jhdr_size = jnl->jhdr->jhdr_size, new_offset;
+       off_t   overlap, block_start, block_end;
+
+       block_start = block_num*jhdr_size;
+       block_end = block_start + size;
+       overwrite = (block_num == (*buf_ptr)[blk_index].block_num && size >= (*buf_ptr)[blk_index].block_size);
+
+       // first, eliminate any overlap with the previous entry
+       if (blk_index != 0 && !overwrite) {
+               off_t prev_block_start = (*buf_ptr)[blk_index-1].block_num*jhdr_size;
+               off_t prev_block_end = prev_block_start + (*buf_ptr)[blk_index-1].block_size;
+               overlap = prev_block_end - block_start;
+               if (overlap > 0) {
+                       if (overlap % jhdr_size != 0) {
+                               panic("jnl: do_overlap: overlap with previous entry not a multiple of %zd\n", jhdr_size);
+                       }
+
+                       // if the previous entry completely overlaps this one, we need to break it into two pieces.
+                       if (prev_block_end > block_end) {
+                               off_t new_num = block_end / jhdr_size;
+                               size_t new_size = prev_block_end - block_end;
+
+                               new_offset = (*buf_ptr)[blk_index-1].jnl_offset + (block_end - prev_block_start);
                
-               err = insert_block(jnl, buf_ptr, blk_index, new_num, new_size, new_offset, num_buckets_ptr, num_full_ptr, 0);
-               if (err < 0) {
-                   panic("jnl: do_overlap: error inserting during pre-overlap\n");
-               }
-           }
+                               err = insert_block(jnl, buf_ptr, blk_index, new_num, new_size, new_offset, cksum, num_buckets_ptr, num_full_ptr, 0);
+                               if (err < 0) {
+                                       panic("jnl: do_overlap: error inserting during pre-overlap\n");
+                               }
+                       }
            
-           // Regardless, we need to truncate the previous entry to the beginning of the overlap
-           (*buf_ptr)[blk_index-1].block_size = block_start - prev_block_start;
+                       // Regardless, we need to truncate the previous entry to the beginning of the overlap
+                       (*buf_ptr)[blk_index-1].block_size = block_start - prev_block_start;
+                       (*buf_ptr)[blk_index-1].cksum = 0;   // have to blow it away because there's no way to check it
+               }
        }
-    }
 
-    // then, bail out fast if there's no overlap with the entries that follow
-    if (!overwrite && block_end <= (*buf_ptr)[blk_index].block_num*jhdr_size) {
-       return 0; // no overlap, no overwrite
-    } else if (overwrite && (blk_index + 1 >= *num_full_ptr || block_end <= (*buf_ptr)[blk_index+1].block_num*jhdr_size)) {
-       return 1; // simple overwrite
-    }
+       // then, bail out fast if there's no overlap with the entries that follow
+       if (!overwrite && block_end <= (off_t)((*buf_ptr)[blk_index].block_num*jhdr_size)) {
+               return 0; // no overlap, no overwrite
+       } else if (overwrite && (blk_index + 1 >= *num_full_ptr || block_end <= (off_t)((*buf_ptr)[blk_index+1].block_num*jhdr_size))) {
+
+               (*buf_ptr)[blk_index].cksum = cksum;   // update this
+               return 1; // simple overwrite
+       }
     
-    // Otherwise, find all cases of total and partial overlap. We use the special
-    // block_num of -2 to designate entries that are completely overlapped and must
-    // be eliminated. The block_num, size, and jnl_offset of partially overlapped
-    // entries must be adjusted to keep the array consistent.
-    index = blk_index;
-    num_to_remove = 0;
-    while(index < *num_full_ptr && block_end > (*buf_ptr)[index].block_num*jhdr_size) {
-       if (block_end >= ((*buf_ptr)[index].block_num*jhdr_size + (*buf_ptr)[index].block_size)) {
-           (*buf_ptr)[index].block_num = -2; // mark this for deletion
-           num_to_remove++;
-       } else {
-           overlap = block_end - (*buf_ptr)[index].block_num*jhdr_size;
-           if (overlap > 0) {
-               if (overlap % jhdr_size != 0) {
-                   panic("jnl: do_overlap: overlap of %lld is not multiple of %d\n", overlap, jhdr_size);
-               }
-               
-               // if we partially overlap this entry, adjust its block number, jnl offset, and size
-               (*buf_ptr)[index].block_num += (overlap / jhdr_size); // make sure overlap is multiple of jhdr_size, or round up
+       // Otherwise, find all cases of total and partial overlap. We use the special
+       // block_num of -2 to designate entries that are completely overlapped and must
+       // be eliminated. The block_num, size, and jnl_offset of partially overlapped
+       // entries must be adjusted to keep the array consistent.
+       index = blk_index;
+       num_to_remove = 0;
+       while (index < *num_full_ptr && block_end > (off_t)((*buf_ptr)[index].block_num*jhdr_size)) {
+               if (block_end >= (off_t)(((*buf_ptr)[index].block_num*jhdr_size + (*buf_ptr)[index].block_size))) {
+                       (*buf_ptr)[index].block_num = -2; // mark this for deletion
+                       num_to_remove++;
+               } else {
+                       overlap = block_end - (*buf_ptr)[index].block_num*jhdr_size;
+                       if (overlap > 0) {
+                               if (overlap % jhdr_size != 0) {
+                                       panic("jnl: do_overlap: overlap of %lld is not multiple of %zd\n", overlap, jhdr_size);
+                               }
+                               
+                               // if we partially overlap this entry, adjust its block number, jnl offset, and size
+                               (*buf_ptr)[index].block_num += (overlap / jhdr_size); // make sure overlap is multiple of jhdr_size, or round up
+                               (*buf_ptr)[index].cksum = 0;
                
-               new_offset = (*buf_ptr)[index].jnl_offset + overlap; // check for wrap-around
-               if (new_offset >= jnl->jhdr->size) {
-                   new_offset = jhdr_size + (new_offset - jnl->jhdr->size);
-               }
-               (*buf_ptr)[index].jnl_offset = new_offset;
+                               new_offset = (*buf_ptr)[index].jnl_offset + overlap; // check for wrap-around
+                               if ((off_t)new_offset >= jnl->jhdr->size) {
+                                       new_offset = jhdr_size + (new_offset - jnl->jhdr->size);
+                               }
+                               (*buf_ptr)[index].jnl_offset = new_offset;
                
-               (*buf_ptr)[index].block_size -= overlap; // sanity check for negative value
-               if ((*buf_ptr)[index].block_size <= 0) {
-                   panic("jnl: do_overlap: after overlap, new block size is invalid (%d)\n", (*buf_ptr)[index].block_size);
-                   // return -1; // if above panic is removed, return -1 for error
+                               (*buf_ptr)[index].block_size -= overlap; // sanity check for negative value
+                               if ((*buf_ptr)[index].block_size <= 0) {
+                                       panic("jnl: do_overlap: after overlap, new block size is invalid (%u)\n", (*buf_ptr)[index].block_size);
+                                       // return -1; // if above panic is removed, return -1 for error
+                               }
+                       }
+                       
                }
-           }
-           
-       }
 
-       index++;
-    }
+               index++;
+       }
 
-    // bcopy over any completely overlapped entries, starting at the right (where the above loop broke out)
-    index--; // start with the last index used within the above loop
-    while(index >= blk_index) {
-       if ((*buf_ptr)[index].block_num == -2) {
-           if (index == *num_full_ptr-1) {
-               (*buf_ptr)[index].block_num = -1; // it's the last item in the table... just mark as free
-           } else {
-               bcopy( (*buf_ptr)+(index+1), (*buf_ptr)+(index), (*num_full_ptr - (index + 1)) * sizeof(struct bucket) );
-           }
-           (*num_full_ptr)--;
+       // bcopy over any completely overlapped entries, starting at the right (where the above loop broke out)
+       index--; // start with the last index used within the above loop
+       while (index >= blk_index) {
+               if ((*buf_ptr)[index].block_num == -2) {
+                       if (index == *num_full_ptr-1) {
+                               (*buf_ptr)[index].block_num = -1; // it's the last item in the table... just mark as free
+                       } else {
+                               bcopy( (*buf_ptr)+(index+1), (*buf_ptr)+(index), (*num_full_ptr - (index + 1)) * sizeof(struct bucket) );
+                       }
+                       (*num_full_ptr)--;
+               }
+               index--;
        }
-       index--;
-    }
 
-    // eliminate any stale entries at the end of the table
-    for(i=*num_full_ptr; i < (*num_full_ptr + num_to_remove); i++) {
-       (*buf_ptr)[i].block_num = -1;
-    }
+       // eliminate any stale entries at the end of the table
+       for(i = *num_full_ptr; i < (*num_full_ptr + num_to_remove); i++) {
+               (*buf_ptr)[i].block_num = -1;
+       }
     
-    return 0; // if we got this far, we need to insert the entry into the table (rather than overwrite) 
+       return 0; // if we got this far, we need to insert the entry into the table (rather than overwrite) 
 }
 
 // PR-3105942: Coalesce writes to the same block in journal replay
@@ -921,84 +1062,94 @@ do_overlap(journal *jnl, struct bucket **buf_ptr, int blk_index, off_t block_num
 // disrupt the existing time-ordering of blocks in the journal playback, care
 // is taken to catch any overlaps and keep the array consistent. 
 static int
-add_block(journal *jnl, struct bucket **buf_ptr, off_t block_num, size_t size, size_t offset, int *num_buckets_ptr, int *num_full_ptr)
+add_block(journal *jnl, struct bucket **buf_ptr, off_t block_num, size_t size, __unused size_t offset, int32_t cksum, int *num_buckets_ptr, int *num_full_ptr)
 {
-    int blk_index, overwriting;
+       int     blk_index, overwriting;
     
-    // on return from lookup_bucket(), blk_index is the index into the table where block_num should be
-    // inserted (or the index of the elem to overwrite). 
-    blk_index = lookup_bucket( buf_ptr, block_num, *num_full_ptr);
+       // on return from lookup_bucket(), blk_index is the index into the table where block_num should be
+       // inserted (or the index of the elem to overwrite). 
+       blk_index = lookup_bucket( buf_ptr, block_num, *num_full_ptr);
     
-    // check if the index is within bounds (if we're adding this block to the end of
-    // the table, blk_index will be equal to num_full)
-    if (blk_index < 0 || blk_index > *num_full_ptr) {
-        //printf("jnl: add_block: trouble adding block to co_buf\n");
-       return -1;
-    } // else printf("jnl: add_block: adding block 0x%llx at i=%d\n", block_num, blk_index);
+       // check if the index is within bounds (if we're adding this block to the end of
+       // the table, blk_index will be equal to num_full)
+       if (blk_index < 0 || blk_index > *num_full_ptr) {
+               //printf("jnl: add_block: trouble adding block to co_buf\n");
+               return -1;
+       } // else printf("jnl: add_block: adding block 0x%llx at i=%d\n", block_num, blk_index);
     
-    // Determine whether we're overwriting an existing entry by checking for overlap
-    overwriting = do_overlap(jnl, buf_ptr, blk_index, block_num, size, offset, num_buckets_ptr, num_full_ptr);
-    if (overwriting < 0) {
-       return -1; // if we got an error, pass it along
-    }
+       // Determine whether we're overwriting an existing entry by checking for overlap
+       overwriting = do_overlap(jnl, buf_ptr, blk_index, block_num, size, offset, cksum, num_buckets_ptr, num_full_ptr);
+       if (overwriting < 0) {
+               return -1; // if we got an error, pass it along
+       }
         
-    // returns the index, or -1 on error
-    blk_index = insert_block(jnl, buf_ptr, blk_index, block_num, size, offset, num_buckets_ptr, num_full_ptr, overwriting);
+       // returns the index, or -1 on error
+       blk_index = insert_block(jnl, buf_ptr, blk_index, block_num, size, offset, cksum, num_buckets_ptr, num_full_ptr, overwriting);
     
-    return blk_index;
+       return blk_index;
 }
 
 static int
 replay_journal(journal *jnl)
 {
-    int i, ret, orig_checksum, checksum, max_bsize;
-    block_list_header *blhdr;
-    off_t offset;
-    char *buff, *block_ptr=NULL;
-    struct bucket *co_buf;
-    int num_buckets = STARTING_BUCKETS, num_full;
-
-    // wrap the start ptr if it points to the very end of the journal
-    if (jnl->jhdr->start == jnl->jhdr->size) {
+       int             i, bad_blocks=0;
+       unsigned int    orig_checksum, checksum, check_block_checksums = 0;
+       size_t          ret;
+       size_t          max_bsize = 0;          /* protected by block_ptr */
+       block_list_header *blhdr;
+       off_t           offset, txn_start_offset=0, blhdr_offset, orig_jnl_start;
+       char            *buff, *block_ptr=NULL;
+       struct bucket   *co_buf;
+       int             num_buckets = STARTING_BUCKETS, num_full, check_past_jnl_end = 1, in_uncharted_territory=0;
+       uint32_t        last_sequence_num = 0;
+       int             replay_retry_count = 0;
+    
+       // wrap the start ptr if it points to the very end of the journal
+       if (jnl->jhdr->start == jnl->jhdr->size) {
                jnl->jhdr->start = jnl->jhdr->jhdr_size;
-    }
-    if (jnl->jhdr->end == jnl->jhdr->size) {
+       }
+       if (jnl->jhdr->end == jnl->jhdr->size) {
                jnl->jhdr->end = jnl->jhdr->jhdr_size;
-    }
+       }
 
-    if (jnl->jhdr->start == jnl->jhdr->end) {
+       if (jnl->jhdr->start == jnl->jhdr->end) {
                return 0;
-    }
+       }
+
+       orig_jnl_start = jnl->jhdr->start;
 
-    // allocate memory for the header_block.  we'll read each blhdr into this
-    if (kmem_alloc(kernel_map, (vm_offset_t *)&buff, jnl->jhdr->blhdr_size)) {
-               printf("jnl: replay_journal: no memory for block buffer! (%d bytes)\n",
-                          jnl->jhdr->blhdr_size);
+       // allocate memory for the header_block.  we'll read each blhdr into this
+       if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&buff, jnl->jhdr->blhdr_size)) {
+               printf("jnl: %s: replay_journal: no memory for block buffer! (%d bytes)\n",
+                      jnl->jdev_name, jnl->jhdr->blhdr_size);
                return -1;
-    }
+       }
 
-    // allocate memory for the coalesce buffer
-    if ((MALLOC(co_buf, struct bucket *, num_buckets*sizeof(struct bucket), M_TEMP, M_WAITOK)) == NULL) {
-        printf("jnl: replay_journal: no memory for coalesce buffer!\n");
-       return -1;
-    }
+       // allocate memory for the coalesce buffer
+       if ((MALLOC(co_buf, struct bucket *, num_buckets*sizeof(struct bucket), M_TEMP, M_WAITOK)) == NULL) {
+               printf("jnl: %s: replay_journal: no memory for coalesce buffer!\n", jnl->jdev_name);
+               return -1;
+       }
 
-    // initialize entries
-    for(i=0; i < num_buckets; i++) {
-        co_buf[i].block_num = -1;
-    }
-    num_full = 0; // empty at first
+restart_replay:
+
+       // initialize entries
+       for(i = 0; i < num_buckets; i++) {
+               co_buf[i].block_num = -1;
+       }
+       num_full = 0; // empty at first
 
 
-    printf("jnl: replay_journal: from: %lld to: %lld (joffset 0x%llx)\n",
-                  jnl->jhdr->start, jnl->jhdr->end, jnl->jdev_offset);
+       printf("jnl: %s: replay_journal: from: %lld to: %lld (joffset 0x%llx)\n",
+              jnl->jdev_name, jnl->jhdr->start, jnl->jhdr->end, jnl->jdev_offset);
 
-    while(jnl->jhdr->start != jnl->jhdr->end) {
-               offset = jnl->jhdr->start;
+       while (check_past_jnl_end || jnl->jhdr->start != jnl->jhdr->end) {
+               offset = blhdr_offset = jnl->jhdr->start;
                ret = read_journal_data(jnl, &offset, buff, jnl->jhdr->blhdr_size);
-               if (ret != jnl->jhdr->blhdr_size) {
-                       printf("jnl: replay_journal: Could not read block list header block @ 0x%llx!\n", offset);
-                       goto bad_replay;
+               if (ret != (size_t)jnl->jhdr->blhdr_size) {
+                       printf("jnl: %s: replay_journal: Could not read block list header block @ 0x%llx!\n", jnl->jdev_name, offset);
+                       bad_blocks = 1;
+                       goto bad_txn_handling;
                }
 
                blhdr = (block_list_header *)buff;
@@ -1008,52 +1159,166 @@ replay_journal(journal *jnl)
                if (jnl->flags & JOURNAL_NEED_SWAP) {
                        // calculate the checksum based on the unswapped data
                        // because it is done byte-at-a-time.
-                       orig_checksum = SWAP32(orig_checksum);
+                       orig_checksum = (unsigned int)SWAP32(orig_checksum);
                        checksum = calc_checksum((char *)blhdr, BLHDR_CHECKSUM_SIZE);
                        swap_block_list_header(jnl, blhdr);
                } else {
                        checksum = calc_checksum((char *)blhdr, BLHDR_CHECKSUM_SIZE);
                }
+
+
+               //
+               // XXXdbg - if these checks fail, we should replay as much
+               //          we can in the hopes that it will still leave the
+               //          drive in a better state than if we didn't replay
+               //          anything
+               //
                if (checksum != orig_checksum) {
-                   printf("jnl: replay_journal: bad block list header @ 0x%llx (checksum 0x%x != 0x%x)\n",
-                          offset, orig_checksum, checksum);
-                   goto bad_replay;
+                       if (check_past_jnl_end && in_uncharted_territory) {
+
+                               if (blhdr_offset != jnl->jhdr->end) {
+                                       printf("jnl: %s: Extra txn replay stopped @ %lld / 0x%llx\n", jnl->jdev_name, blhdr_offset, blhdr_offset);
+                               }
+
+                               check_past_jnl_end = 0;
+                               jnl->jhdr->end = blhdr_offset;
+                               continue;
+                       }
+
+                       printf("jnl: %s: replay_journal: bad block list header @ 0x%llx (checksum 0x%x != 0x%x)\n",
+                       jnl->jdev_name, blhdr_offset, orig_checksum, checksum);
+
+                       if (blhdr_offset == orig_jnl_start) {
+                               // if there's nothing in the journal at all, just bail out altogether.
+                               goto bad_replay;
+                       }
+
+                       bad_blocks = 1;
+                       goto bad_txn_handling;
+               }
+
+               if (   (last_sequence_num != 0)
+                      && (blhdr->binfo[0].u.bi.b.sequence_num != 0)
+                      && (blhdr->binfo[0].u.bi.b.sequence_num != last_sequence_num)
+                      && (blhdr->binfo[0].u.bi.b.sequence_num != last_sequence_num+1)) {
+
+                       txn_start_offset = jnl->jhdr->end = blhdr_offset;
+
+                       if (check_past_jnl_end) {
+                               check_past_jnl_end = 0;
+                               printf("jnl: %s: 2: extra replay stopped @ %lld / 0x%llx (seq %d < %d)\n",
+                                      jnl->jdev_name, blhdr_offset, blhdr_offset, blhdr->binfo[0].u.bi.b.sequence_num, last_sequence_num);
+                               continue;
+                       }
+
+                       printf("jnl: %s: txn sequence numbers out of order in txn @ %lld / %llx! (%d < %d)\n",
+                              jnl->jdev_name, blhdr_offset, blhdr_offset, blhdr->binfo[0].u.bi.b.sequence_num, last_sequence_num);
+                       bad_blocks = 1;
+                       goto bad_txn_handling;
+               }
+               last_sequence_num = blhdr->binfo[0].u.bi.b.sequence_num;
+
+               if (blhdr_offset >= jnl->jhdr->end && jnl->jhdr->start <= jnl->jhdr->end) {
+                       if (last_sequence_num == 0) {
+                               check_past_jnl_end = 0;
+                               printf("jnl: %s: pre-sequence-num-enabled txn's - can not go further than end (%lld %lld).\n",
+                                      jnl->jdev_name, jnl->jhdr->start, jnl->jhdr->end);
+                               if (jnl->jhdr->start != jnl->jhdr->end) {
+                                       jnl->jhdr->start = jnl->jhdr->end;
+                               }
+                               continue;
+                       }
+                       printf("jnl: %s: examining extra transactions starting @ %lld / 0x%llx\n", jnl->jdev_name, blhdr_offset, blhdr_offset);
                }
-               if (   blhdr->max_blocks <= 0 || blhdr->max_blocks > 2048
-                          || blhdr->num_blocks <= 0 || blhdr->num_blocks > blhdr->max_blocks) {
-                   printf("jnl: replay_journal: bad looking journal entry: max: %d num: %d\n",
-                          blhdr->max_blocks, blhdr->num_blocks);
-                   goto bad_replay;
+
+               if (   blhdr->max_blocks <= 0 || blhdr->max_blocks > (jnl->jhdr->size/jnl->jhdr->jhdr_size)
+                      || blhdr->num_blocks <= 0 || blhdr->num_blocks > blhdr->max_blocks) {
+                       printf("jnl: %s: replay_journal: bad looking journal entry: max: %d num: %d\n",
+                              jnl->jdev_name, blhdr->max_blocks, blhdr->num_blocks);
+                       bad_blocks = 1;
+                       goto bad_txn_handling;
                }
        
-               for(i=1; i < blhdr->num_blocks; i++) {
+               max_bsize = 0;
+               for (i = 1; i < blhdr->num_blocks; i++) {
                        if (blhdr->binfo[i].bnum < 0 && blhdr->binfo[i].bnum != (off_t)-1) {
-                               printf("jnl: replay_journal: bogus block number 0x%llx\n", blhdr->binfo[i].bnum);
+                               printf("jnl: %s: replay_journal: bogus block number 0x%llx\n", jnl->jdev_name, blhdr->binfo[i].bnum);
+                               bad_blocks = 1;
+                               goto bad_txn_handling;
+                       }
+                       
+                       if ((size_t)blhdr->binfo[i].u.bi.bsize > max_bsize) {
+                               max_bsize = blhdr->binfo[i].u.bi.bsize;
+                       }
+               }
+
+               if (blhdr->flags & BLHDR_CHECK_CHECKSUMS) {
+                       check_block_checksums = 1;
+                       if (kmem_alloc(kernel_map, (vm_offset_t *)&block_ptr, max_bsize)) {
                                goto bad_replay;
                        }
+               } else {
+                       block_ptr = NULL;
+               }
+
+               if (blhdr->flags & BLHDR_FIRST_HEADER) {
+                       txn_start_offset = blhdr_offset;
                }
 
                //printf("jnl: replay_journal: adding %d blocks in journal entry @ 0x%llx to co_buf\n", 
                //       blhdr->num_blocks-1, jnl->jhdr->start);
-               for(i=1; i < blhdr->num_blocks; i++) {
+               bad_blocks = 0;
+               for (i = 1; i < blhdr->num_blocks; i++) {
                        int size, ret_val;
                        off_t number;
 
-                       size = blhdr->binfo[i].bsize;
+                       size = blhdr->binfo[i].u.bi.bsize;
                        number = blhdr->binfo[i].bnum;
                        
                        // don't add "killed" blocks
                        if (number == (off_t)-1) {
-                           //printf("jnl: replay_journal: skipping killed fs block (index %d)\n", i);
+                               //printf("jnl: replay_journal: skipping killed fs block (index %d)\n", i);
                        } else {
-                           // add this bucket to co_buf, coalescing where possible
-                           // printf("jnl: replay_journal: adding block 0x%llx\n", number);
-                           ret_val = add_block(jnl, &co_buf, number, size, (size_t) offset, &num_buckets, &num_full);
+
+                               if (check_block_checksums) {
+                                       int32_t disk_cksum;
+                                       off_t block_offset;
+
+                                       block_offset = offset;
+
+                                       // read the block so we can check the checksum
+                                       ret = read_journal_data(jnl, &block_offset, block_ptr, size);
+                                       if (ret != (size_t)size) {
+                                               printf("jnl: %s: replay_journal: Could not read journal entry data @ offset 0x%llx!\n", jnl->jdev_name, offset);
+                                               bad_blocks = 1;
+                                               goto bad_txn_handling;
+                                       }
+                               
+                                       disk_cksum = calc_checksum(block_ptr, size);
+
+                                       // there is no need to swap the checksum from disk because
+                                       // it got swapped when the blhdr was read in.
+                                       if (blhdr->binfo[i].u.bi.b.cksum != 0 && disk_cksum != blhdr->binfo[i].u.bi.b.cksum) {
+                                               printf("jnl: %s: txn starting at %lld (%lld) @ index %3d bnum %lld (%d) with disk cksum != blhdr cksum (0x%.8x 0x%.8x)\n",
+                                                      jnl->jdev_name, txn_start_offset, blhdr_offset, i, number, size, disk_cksum, blhdr->binfo[i].u.bi.b.cksum);
+                                               printf("jnl: 0x%.8x 0x%.8x 0x%.8x 0x%.8x  0x%.8x 0x%.8x 0x%.8x 0x%.8x\n",
+                                                      *(int *)&block_ptr[0*sizeof(int)], *(int *)&block_ptr[1*sizeof(int)], *(int *)&block_ptr[2*sizeof(int)], *(int *)&block_ptr[3*sizeof(int)],
+                                                      *(int *)&block_ptr[4*sizeof(int)], *(int *)&block_ptr[5*sizeof(int)], *(int *)&block_ptr[6*sizeof(int)], *(int *)&block_ptr[7*sizeof(int)]);
+
+                                               bad_blocks = 1;
+                                               goto bad_txn_handling;
+                                       }
+                               }
+
+
+                               // add this bucket to co_buf, coalescing where possible
+                               // printf("jnl: replay_journal: adding block 0x%llx\n", number);
+                               ret_val = add_block(jnl, &co_buf, number, size, (size_t) offset, blhdr->binfo[i].u.bi.b.cksum, &num_buckets, &num_full);
                            
-                           if (ret_val == -1) {
-                               printf("jnl: replay_journal: trouble adding block to co_buf\n");
-                               goto bad_replay;
-                           } // else printf("jnl: replay_journal: added block 0x%llx at i=%d\n", number);
+                               if (ret_val == -1) {
+                                       printf("jnl: %s: replay_journal: trouble adding block to co_buf\n", jnl->jdev_name);
+                                       goto bad_replay;
+                               } // else printf("jnl: replay_journal: added block 0x%llx at i=%d\n", number);
                        }
                        
                        // increment offset
@@ -1064,104 +1329,148 @@ replay_journal(journal *jnl)
                        // into account
                        //
                        if (offset >= jnl->jhdr->size) {
-                           offset = jnl->jhdr->jhdr_size + (offset - jnl->jhdr->size);
+                               offset = jnl->jhdr->jhdr_size + (offset - jnl->jhdr->size);
                        }
                }
 
+               if (block_ptr) {
+                       kmem_free(kernel_map, (vm_offset_t)block_ptr, max_bsize);
+                       block_ptr = NULL;
+               }
                
+bad_txn_handling:
+               if (bad_blocks) {
+                       /* Journal replay got error before it found any valid 
+                        *  transations, abort replay */
+                       if (txn_start_offset == 0) {
+                               printf("jnl: %s: no known good txn start offset! aborting journal replay.\n", jnl->jdev_name);
+                               goto bad_replay;
+                       }
+
+                       /* Repeated error during journal replay, abort replay */
+                       if (replay_retry_count == 3) {
+                               printf("jnl: %s: repeated errors replaying journal! aborting journal replay.\n", jnl->jdev_name);
+                               goto bad_replay;
+                       }
+                       replay_retry_count++;
+
+                       /* There was an error replaying the journal (possibly 
+                        * EIO/ENXIO from the device).  So retry replaying all 
+                        * the good transactions that we found before getting 
+                        * the error.  
+                        */
+                       jnl->jhdr->start = orig_jnl_start;
+                       jnl->jhdr->end = txn_start_offset;
+                       check_past_jnl_end = 0;
+                       last_sequence_num = 0;
+                       printf("jnl: %s: restarting journal replay (%lld - %lld)!\n", jnl->jdev_name, jnl->jhdr->start, jnl->jhdr->end);
+                       goto restart_replay;
+               }
+
                jnl->jhdr->start += blhdr->bytes_used;
                if (jnl->jhdr->start >= jnl->jhdr->size) {
                        // wrap around and skip the journal header block
                        jnl->jhdr->start = (jnl->jhdr->start % jnl->jhdr->size) + jnl->jhdr->jhdr_size;
                }
-    }
 
+               if (jnl->jhdr->start == jnl->jhdr->end) {
+                       in_uncharted_territory = 1;
+               }
+       }
+
+       if (jnl->jhdr->start != jnl->jhdr->end) {
+               printf("jnl: %s: start %lld != end %lld.  resetting end.\n", jnl->jdev_name, jnl->jhdr->start, jnl->jhdr->end);
+               jnl->jhdr->end = jnl->jhdr->start;
+       }
 
-    //printf("jnl: replay_journal: replaying %d blocks\n", num_full);
+       //printf("jnl: replay_journal: replaying %d blocks\n", num_full);
     
-    /*
-     * make sure it's at least one page in size, so
-     * start max_bsize at PAGE_SIZE
-     */
-    for (i = 0, max_bsize = PAGE_SIZE; i < num_full; i++) {
-
-            if (co_buf[i].block_num == (off_t)-1)
-                   continue;
-
-           if (co_buf[i].block_size > max_bsize)
-                   max_bsize = co_buf[i].block_size;
-    }
-    /*
-     * round max_bsize up to the nearest PAGE_SIZE multiple
-     */
-    if (max_bsize & (PAGE_SIZE - 1)) {
-            max_bsize = (max_bsize + PAGE_SIZE) & ~(PAGE_SIZE - 1);
-    }
-
-    if (kmem_alloc(kernel_map, (vm_offset_t *)&block_ptr, max_bsize)) {
-       goto bad_replay;
-    }
+       /*
+        * make sure it's at least one page in size, so
+        * start max_bsize at PAGE_SIZE
+        */
+       for (i = 0, max_bsize = PAGE_SIZE; i < num_full; i++) {
+
+               if (co_buf[i].block_num == (off_t)-1)
+                       continue;
+
+               if (co_buf[i].block_size > max_bsize)
+                       max_bsize = co_buf[i].block_size;
+       }
+       /*
+        * round max_bsize up to the nearest PAGE_SIZE multiple
+        */
+       if (max_bsize & (PAGE_SIZE - 1)) {
+               max_bsize = (max_bsize + PAGE_SIZE) & ~(PAGE_SIZE - 1);
+       }
+
+       if (kmem_alloc(kernel_map, (vm_offset_t *)&block_ptr, max_bsize)) {
+               goto bad_replay;
+       }
     
-    // Replay the coalesced entries in the co-buf
-    for(i=0; i < num_full; i++) {
-       size_t size = co_buf[i].block_size;
-       off_t jnl_offset = (off_t) co_buf[i].jnl_offset;
-       off_t number = co_buf[i].block_num;
+       // Replay the coalesced entries in the co-buf
+       for(i = 0; i < num_full; i++) {
+               size_t size = co_buf[i].block_size;
+               off_t jnl_offset = (off_t) co_buf[i].jnl_offset;
+               off_t number = co_buf[i].block_num;
        
        
-       // printf("replaying co_buf[%d]: block 0x%llx, size 0x%x, jnl_offset 0x%llx\n", i, co_buf[i].block_num,
-       //      co_buf[i].block_size, co_buf[i].jnl_offset);
+               // printf("replaying co_buf[%d]: block 0x%llx, size 0x%x, jnl_offset 0x%llx\n", i, co_buf[i].block_num,
+               //      co_buf[i].block_size, co_buf[i].jnl_offset);
        
-       if (number == (off_t)-1) {
-           // printf("jnl: replay_journal: skipping killed fs block\n");
-       } else {
+               if (number == (off_t)-1) {
+                       // printf("jnl: replay_journal: skipping killed fs block\n");
+               } else {
            
-           // do journal read, and set the phys. block 
-           ret = read_journal_data(jnl, &jnl_offset, block_ptr, size);
-           if (ret != size) {
-               printf("jnl: replay_journal: Could not read journal entry data @ offset 0x%llx!\n", offset);
-               goto bad_replay;
-           }
+                       // do journal read, and set the phys. block 
+                       ret = read_journal_data(jnl, &jnl_offset, block_ptr, size);
+                       if (ret != size) {
+                               printf("jnl: %s: replay_journal: Could not read journal entry data @ offset 0x%llx!\n", jnl->jdev_name, offset);
+                               goto bad_replay;
+                       }
                    
-           if (update_fs_block(jnl, block_ptr, number, size) != 0) {
-               goto bad_replay;
-           }
+                       if (update_fs_block(jnl, block_ptr, number, size) != 0) {
+                               goto bad_replay;
+                       }
+               }
        }
-    }
     
+       
+       // done replaying; update jnl header
+       if (write_journal_header(jnl, 1, jnl->jhdr->sequence_num) != 0) {
+               goto bad_replay;
+       }
 
-    // done replaying; update jnl header
-    if (write_journal_header(jnl) != 0) {
-       goto bad_replay;
-    }
+       printf("jnl: %s: journal replay done.\n", jnl->jdev_name);
     
-    // free block_ptr
-    kmem_free(kernel_map, (vm_offset_t)block_ptr, max_bsize);
-    block_ptr = NULL;
+       // free block_ptr
+       if (block_ptr) {
+               kmem_free(kernel_map, (vm_offset_t)block_ptr, max_bsize);
+               block_ptr = NULL;
+       }
     
-    // free the coalesce buffer
-    FREE(co_buf, M_TEMP);
-    co_buf = NULL;
+       // free the coalesce buffer
+       FREE(co_buf, M_TEMP);
+       co_buf = NULL;
   
-    kmem_free(kernel_map, (vm_offset_t)buff, jnl->jhdr->blhdr_size);
-    return 0;
+       kmem_free(kernel_map, (vm_offset_t)buff, jnl->jhdr->blhdr_size);
+       return 0;
 
-  bad_replay:
-    if (block_ptr) {
+bad_replay:
+       if (block_ptr) {
                kmem_free(kernel_map, (vm_offset_t)block_ptr, max_bsize);
-    }
-    if (co_buf) {
-      FREE(co_buf, M_TEMP);
-    }
-    kmem_free(kernel_map, (vm_offset_t)buff, jnl->jhdr->blhdr_size);
+       }
+       if (co_buf) {
+               FREE(co_buf, M_TEMP);
+       }
+       kmem_free(kernel_map, (vm_offset_t)buff, jnl->jhdr->blhdr_size);
 
-    return -1;
+       return -1;
 }
 
 
 #define DEFAULT_TRANSACTION_BUFFER_SIZE  (128*1024)
-//#define DEFAULT_TRANSACTION_BUFFER_SIZE  (256*1024)  // better performance but uses more mem
-#define MAX_TRANSACTION_BUFFER_SIZE      (512*1024)
+#define MAX_TRANSACTION_BUFFER_SIZE      (2048*1024)
 
 // XXXdbg - so I can change it in the debugger
 int def_tbuffer_size = 0;
@@ -1186,16 +1495,16 @@ size_up_tbuffer(journal *jnl, int tbuffer_size, int phys_blksz)
                        def_tbuffer_size = DEFAULT_TRANSACTION_BUFFER_SIZE * 2;
                } else if (mem_size < (1024*1024*1024)) {
                        def_tbuffer_size = DEFAULT_TRANSACTION_BUFFER_SIZE * 3;
-               } else if (mem_size >= (1024*1024*1024)) {
-                       def_tbuffer_size = DEFAULT_TRANSACTION_BUFFER_SIZE * 4;
+               } else {
+                       def_tbuffer_size = DEFAULT_TRANSACTION_BUFFER_SIZE * (mem_size / (256*1024*1024));
                }
        }
 
-    // size up the transaction buffer... can't be larger than the number
-    // of blocks that can fit in a block_list_header block.
-    if (tbuffer_size == 0) {
+       // size up the transaction buffer... can't be larger than the number
+       // of blocks that can fit in a block_list_header block.
+       if (tbuffer_size == 0) {
                jnl->tbuffer_size = def_tbuffer_size;
-    } else {
+       } else {
                // make sure that the specified tbuffer_size isn't too small
                if (tbuffer_size < jnl->jhdr->blhdr_size * 2) {
                        tbuffer_size = jnl->jhdr->blhdr_size * 2;
@@ -1206,27 +1515,110 @@ size_up_tbuffer(journal *jnl, int tbuffer_size, int phys_blksz)
                }
 
                jnl->tbuffer_size = tbuffer_size;
-    }
+       }
 
-    if (jnl->tbuffer_size > (jnl->jhdr->size / 2)) {
+       if (jnl->tbuffer_size > (jnl->jhdr->size / 2)) {
                jnl->tbuffer_size = (jnl->jhdr->size / 2);
-    }
+       }
     
-    if (jnl->tbuffer_size > MAX_TRANSACTION_BUFFER_SIZE) {
+       if (jnl->tbuffer_size > MAX_TRANSACTION_BUFFER_SIZE) {
                jnl->tbuffer_size = MAX_TRANSACTION_BUFFER_SIZE;
-    }
+       }
 
-    jnl->jhdr->blhdr_size = (jnl->tbuffer_size / jnl->jhdr->jhdr_size) * sizeof(block_info);
-    if (jnl->jhdr->blhdr_size < phys_blksz) {
-       jnl->jhdr->blhdr_size = phys_blksz;
-    } else if ((jnl->jhdr->blhdr_size % phys_blksz) != 0) {
+       jnl->jhdr->blhdr_size = (jnl->tbuffer_size / jnl->jhdr->jhdr_size) * sizeof(block_info);
+       if (jnl->jhdr->blhdr_size < phys_blksz) {
+               jnl->jhdr->blhdr_size = phys_blksz;
+       } else if ((jnl->jhdr->blhdr_size % phys_blksz) != 0) {
                // have to round up so we're an even multiple of the physical block size
                jnl->jhdr->blhdr_size = (jnl->jhdr->blhdr_size + (phys_blksz - 1)) & ~(phys_blksz - 1);
-    }
+       }
 }
 
 
 
+static void
+get_io_info(struct vnode *devvp, size_t phys_blksz, journal *jnl, struct vfs_context *context)
+{
+       off_t   readblockcnt;
+       off_t   writeblockcnt;
+       off_t   readmaxcnt=0, tmp_readmaxcnt;
+       off_t   writemaxcnt=0, tmp_writemaxcnt;
+       off_t   readsegcnt, writesegcnt;
+       int32_t features;
+
+       if (VNOP_IOCTL(devvp, DKIOCGETFEATURES, (caddr_t)&features, 0, context) == 0) {
+               if (features & DK_FEATURE_FORCE_UNIT_ACCESS) {
+                       const char *name = vnode_getname_printable(devvp);
+                       jnl->flags |= JOURNAL_DO_FUA_WRITES;
+                       printf("jnl: %s: enabling FUA writes (features 0x%x)\n", name, features);
+                       vnode_putname_printable(name);
+               }
+               if (features & DK_FEATURE_UNMAP) {
+                       jnl->flags |= JOURNAL_USE_UNMAP;
+               }
+       }
+
+       //
+       // First check the max read size via several different mechanisms...
+       //
+       VNOP_IOCTL(devvp, DKIOCGETMAXBYTECOUNTREAD, (caddr_t)&readmaxcnt, 0, context);
+
+       if (VNOP_IOCTL(devvp, DKIOCGETMAXBLOCKCOUNTREAD, (caddr_t)&readblockcnt, 0, context) == 0) {
+               tmp_readmaxcnt = readblockcnt * phys_blksz;
+               if (readmaxcnt == 0 || (readblockcnt > 0 && tmp_readmaxcnt < readmaxcnt)) {
+                       readmaxcnt = tmp_readmaxcnt;
+               }
+       }
+
+       if (VNOP_IOCTL(devvp, DKIOCGETMAXSEGMENTCOUNTREAD, (caddr_t)&readsegcnt, 0, context)) {
+               readsegcnt = 0;
+       }
+
+       if (readsegcnt > 0 && (readsegcnt * PAGE_SIZE) < readmaxcnt) {
+               readmaxcnt = readsegcnt * PAGE_SIZE;
+       }
+           
+       if (readmaxcnt == 0) {
+               readmaxcnt = 128 * 1024;
+       } else if (readmaxcnt > UINT32_MAX) {
+               readmaxcnt = UINT32_MAX;
+       }
+
+
+       //
+       // Now check the max writes size via several different mechanisms...
+       //
+       VNOP_IOCTL(devvp, DKIOCGETMAXBYTECOUNTWRITE, (caddr_t)&writemaxcnt, 0, context);
+
+       if (VNOP_IOCTL(devvp, DKIOCGETMAXBLOCKCOUNTWRITE, (caddr_t)&writeblockcnt, 0, context) == 0) {
+               tmp_writemaxcnt = writeblockcnt * phys_blksz;
+               if (writemaxcnt == 0 || (writeblockcnt > 0 && tmp_writemaxcnt < writemaxcnt)) {
+                       writemaxcnt = tmp_writemaxcnt;
+               }
+       }
+
+       if (VNOP_IOCTL(devvp, DKIOCGETMAXSEGMENTCOUNTWRITE,     (caddr_t)&writesegcnt, 0, context)) {
+               writesegcnt = 0;
+       }
+
+       if (writesegcnt > 0 && (writesegcnt * PAGE_SIZE) < writemaxcnt) {
+               writemaxcnt = writesegcnt * PAGE_SIZE;
+       }
+
+       if (writemaxcnt == 0) {
+               writemaxcnt = 128 * 1024;
+       } else if (writemaxcnt > UINT32_MAX) {
+               writemaxcnt = UINT32_MAX;
+       }
+
+       jnl->max_read_size  = readmaxcnt;
+       jnl->max_write_size = writemaxcnt;
+       // printf("jnl: %s: max read/write: %lld k / %lld k\n",
+       //     jnl->jdev_name ? jnl->jdev_name : "unknown",
+       //     jnl->max_read_size/1024, jnl->max_write_size/1024);
+}
+
+
 journal *
 journal_create(struct vnode *jvp,
                           off_t         offset,
@@ -1236,81 +1628,178 @@ journal_create(struct vnode *jvp,
                           int32_t       flags,
                           int32_t       tbuffer_size,
                           void        (*flush)(void *arg),
-                          void         *arg)
-{
-    journal *jnl;
-    int      phys_blksz;
-    struct vfs_context context;
-
-    context.vc_proc = current_proc();
-    context.vc_ucred = FSCRED;
-
-    /* Get the real physical block size. */
-    if (VNOP_IOCTL(jvp, DKIOCGETBLOCKSIZE, (caddr_t)&phys_blksz, 0, &context)) {
-               return NULL;
-    }
-
-    if (phys_blksz > min_fs_blksz) {
-               printf("jnl: create: error: phys blksize %d bigger than min fs blksize %d\n",
-                          phys_blksz, min_fs_blksz);
-               return NULL;
-    }
-
-    if ((journal_size % phys_blksz) != 0) {
-               printf("jnl: create: journal size 0x%llx is not an even multiple of block size 0x%x\n",
-                          journal_size, phys_blksz);
-               return NULL;
-    }
-
-    MALLOC_ZONE(jnl, struct journal *, sizeof(struct journal), M_JNL_JNL, M_WAITOK);
-    memset(jnl, 0, sizeof(*jnl));
-
-    jnl->jdev         = jvp;
-    jnl->jdev_offset  = offset;
-    jnl->fsdev        = fsvp;
-    jnl->flush        = flush;
-    jnl->flush_arg    = arg;
-    jnl->flags        = (flags & JOURNAL_OPTION_FLAGS_MASK);
-    lck_mtx_init(&jnl->old_start_lock, jnl_mutex_group, jnl_lock_attr);
+                          void         *arg,
+                          struct mount *fsmount)
+{
+       journal         *jnl;
+       uint32_t        phys_blksz, new_txn_base;
+       u_int32_t       min_size;
+       struct vfs_context context;
+       const char      *jdev_name;
+       /* 
+        * Cap the journal max size to 2GB.  On HFS, it will attempt to occupy
+        * a full allocation block if the current size is smaller than the allocation
+        * block on which it resides.  Once we hit the exabyte filesystem range, then
+        * it will use 2GB allocation blocks.  As a result, make the cap 2GB.
+        */
+       context.vc_thread = current_thread();
+       context.vc_ucred = FSCRED;
+
+       jdev_name = vnode_getname_printable(jvp);
+
+       /* Get the real physical block size. */
+       if (VNOP_IOCTL(jvp, DKIOCGETBLOCKSIZE, (caddr_t)&phys_blksz, 0, &context)) {
+               goto cleanup_jdev_name;
+       }
+
+       if (journal_size < (256*1024) || journal_size > (MAX_JOURNAL_SIZE)) {
+               printf("jnl: %s: create: journal size %lld looks bogus.\n", jdev_name, journal_size);
+               goto cleanup_jdev_name;
+       }
+
+       min_size = phys_blksz * (phys_blksz / sizeof(block_info));
+       /* Reject journals that are too small given the sector size of the device */
+       if (journal_size < min_size) {
+               printf("jnl: %s: create: journal size (%lld) too small given sector size of (%u)\n", 
+                               jdev_name, journal_size, phys_blksz);
+               goto cleanup_jdev_name;
+       }
+
+       if (phys_blksz > min_fs_blksz) {
+               printf("jnl: %s: create: error: phys blksize %u bigger than min fs blksize %zd\n",
+                      jdev_name, phys_blksz, min_fs_blksz);
+               goto cleanup_jdev_name;
+       }
+
+       if ((journal_size % phys_blksz) != 0) {
+               printf("jnl: %s: create: journal size 0x%llx is not an even multiple of block size 0x%ux\n",
+                      jdev_name, journal_size, phys_blksz);
+               goto cleanup_jdev_name;
+       }
+
+
+       MALLOC_ZONE(jnl, struct journal *, sizeof(struct journal), M_JNL_JNL, M_WAITOK);
+       memset(jnl, 0, sizeof(*jnl));
+
+       jnl->jdev         = jvp;
+       jnl->jdev_offset  = offset;
+       jnl->fsdev        = fsvp;
+       jnl->flush        = flush;
+       jnl->flush_arg    = arg;
+       jnl->flags        = (flags & JOURNAL_OPTION_FLAGS_MASK);
+       jnl->jdev_name    = jdev_name;
+       lck_mtx_init(&jnl->old_start_lock, jnl_mutex_group, jnl_lock_attr);
+
+       // Keep a point to the mount around for use in IO throttling.
+       jnl->fsmount      = fsmount;
+       // XXX: This lock discipline looks correct based on dounmount(), but it
+       // doesn't seem to be documented anywhere.
+       mount_ref(fsmount, 0);
+
+       get_io_info(jvp, phys_blksz, jnl, &context);
        
-    if (kmem_alloc(kernel_map, (vm_offset_t *)&jnl->header_buf, phys_blksz)) {
-               printf("jnl: create: could not allocate space for header buffer (%d bytes)\n", phys_blksz);
+       if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&jnl->header_buf, phys_blksz)) {
+               printf("jnl: %s: create: could not allocate space for header buffer (%u bytes)\n", jdev_name, phys_blksz);
                goto bad_kmem_alloc;
-    }
+       }
+       jnl->header_buf_size = phys_blksz;
+
+       jnl->jhdr = (journal_header *)jnl->header_buf;
+       memset(jnl->jhdr, 0, sizeof(journal_header));
+
+       // we have to set this up here so that do_journal_io() will work
+       jnl->jhdr->jhdr_size = phys_blksz;
+
+       //
+       // We try and read the journal header to see if there is already one
+       // out there.  If there is, it's possible that it has transactions
+       // in it that we might replay if we happen to pick a sequence number
+       // that is a little less than the old one, there is a crash and the 
+       // last txn written ends right at the start of a txn from the previous
+       // incarnation of this file system.  If all that happens we would
+       // replay the transactions from the old file system and that would
+       // destroy your disk.  Although it is extremely unlikely for all those
+       // conditions to happen, the probability is non-zero and the result is
+       // severe - you lose your file system.  Therefore if we find a valid
+       // journal header and the sequence number is non-zero we write junk
+       // over the entire journal so that there is no way we will encounter
+       // any old transactions.  This is slow but should be a rare event
+       // since most tools erase the journal.
+       //
+       if (   read_journal_header(jnl, jnl->jhdr, phys_blksz) == phys_blksz
+              && jnl->jhdr->magic == JOURNAL_HEADER_MAGIC
+              && jnl->jhdr->sequence_num != 0) {
+
+               new_txn_base = (jnl->jhdr->sequence_num + (journal_size / phys_blksz) + (random() % 16384)) & 0x00ffffff;
+               printf("jnl: %s: create: avoiding old sequence number 0x%x (0x%x)\n", jdev_name, jnl->jhdr->sequence_num, new_txn_base);
+
+#if 0
+               int i;
+               off_t pos=0;
+
+               for(i = 1; i < journal_size / phys_blksz; i++) {
+                       pos = i*phys_blksz;
+
+                       // we don't really care what data we write just so long
+                       // as it's not a valid transaction header.  since we have
+                       // the header_buf sitting around we'll use that.
+                       write_journal_data(jnl, &pos, jnl->header_buf, phys_blksz);
+               }
+               printf("jnl: create: done clearing journal (i=%d)\n", i);
+#endif
+       } else {
+               new_txn_base = random() & 0x00ffffff;
+       }
 
-    memset(jnl->header_buf, 0, phys_blksz);
+       memset(jnl->header_buf, 0, phys_blksz);
     
-    jnl->jhdr             = (journal_header *)jnl->header_buf;
-    jnl->jhdr->magic      = JOURNAL_HEADER_MAGIC;
-    jnl->jhdr->endian     = ENDIAN_MAGIC;
-    jnl->jhdr->start      = phys_blksz;    // start at block #1, block #0 is for the jhdr itself
-    jnl->jhdr->end        = phys_blksz;
-    jnl->jhdr->size       = journal_size;
-    jnl->jhdr->jhdr_size  = phys_blksz;
-    size_up_tbuffer(jnl, tbuffer_size, phys_blksz);
+       jnl->jhdr->magic      = JOURNAL_HEADER_MAGIC;
+       jnl->jhdr->endian     = ENDIAN_MAGIC;
+       jnl->jhdr->start      = phys_blksz;    // start at block #1, block #0 is for the jhdr itself
+       jnl->jhdr->end        = phys_blksz;
+       jnl->jhdr->size       = journal_size;
+       jnl->jhdr->jhdr_size  = phys_blksz;
+       size_up_tbuffer(jnl, tbuffer_size, phys_blksz);
 
        jnl->active_start     = jnl->jhdr->start;
 
-    // XXXdbg  - for testing you can force the journal to wrap around
-    // jnl->jhdr->start = jnl->jhdr->size - (phys_blksz*3);
-    // jnl->jhdr->end   = jnl->jhdr->size - (phys_blksz*3);
+       // XXXdbg  - for testing you can force the journal to wrap around
+       // jnl->jhdr->start = jnl->jhdr->size - (phys_blksz*3);
+       // jnl->jhdr->end   = jnl->jhdr->size - (phys_blksz*3);
     
+       jnl->jhdr->sequence_num = new_txn_base;
+
        lck_mtx_init(&jnl->jlock, jnl_mutex_group, jnl_lock_attr);
+       lck_mtx_init(&jnl->flock, jnl_mutex_group, jnl_lock_attr);
+       lck_rw_init(&jnl->trim_lock, jnl_mutex_group, jnl_lock_attr);
+
 
-    if (write_journal_header(jnl) != 0) {
-               printf("jnl: journal_create: failed to write journal header.\n");
+       jnl->flushing = FALSE;
+       jnl->asyncIO = FALSE;
+       jnl->flush_aborted = FALSE;
+       jnl->writing_header = FALSE;
+       jnl->async_trim = NULL;
+       jnl->sequence_num = jnl->jhdr->sequence_num;
+       
+       if (write_journal_header(jnl, 1, jnl->jhdr->sequence_num) != 0) {
+               printf("jnl: %s: journal_create: failed to write journal header.\n", jdev_name);
                goto bad_write;
-    }
+       }
 
-    return jnl;
+       goto journal_create_complete;
 
 
-  bad_write:
-    kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, phys_blksz);
-  bad_kmem_alloc:
-    jnl->jhdr = NULL;
+bad_write:
+       kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, phys_blksz);
+bad_kmem_alloc:
+       jnl->jhdr = NULL;
        FREE_ZONE(jnl, sizeof(struct journal), M_JNL_JNL);
-    return NULL;
+       mount_drop(fsmount, 0);
+cleanup_jdev_name:
+       vnode_putname_printable(jdev_name);
+       jnl = NULL;
+journal_create_complete:
+       return jnl;
 }
 
 
@@ -1323,60 +1812,87 @@ journal_open(struct vnode *jvp,
                         int32_t       flags,
                         int32_t       tbuffer_size,
                         void        (*flush)(void *arg),
-                        void         *arg)
-{
-    journal *jnl;
-    int      orig_blksz=0, phys_blksz;
-       int      orig_checksum, checksum;
-    struct vfs_context context;
-
-    context.vc_proc = current_proc();
-    context.vc_ucred = FSCRED;
-
-    /* Get the real physical block size. */
-    if (VNOP_IOCTL(jvp, DKIOCGETBLOCKSIZE, (caddr_t)&phys_blksz, 0, &context)) {
-               return NULL;
-    }
-
-    if (phys_blksz > min_fs_blksz) {
-               printf("jnl: create: error: phys blksize %d bigger than min fs blksize %d\n",
-                          phys_blksz, min_fs_blksz);
-               return NULL;
-    }
-
-    if ((journal_size % phys_blksz) != 0) {
-               printf("jnl: open: journal size 0x%llx is not an even multiple of block size 0x%x\n",
-                          journal_size, phys_blksz);
-               return NULL;
-    }
-
-    MALLOC_ZONE(jnl, struct journal *, sizeof(struct journal), M_JNL_JNL, M_WAITOK);
-    memset(jnl, 0, sizeof(*jnl));
-
-    jnl->jdev         = jvp;
-    jnl->jdev_offset  = offset;
-    jnl->fsdev        = fsvp;
-    jnl->flush        = flush;
-    jnl->flush_arg    = arg;
-    jnl->flags        = (flags & JOURNAL_OPTION_FLAGS_MASK);
-    lck_mtx_init(&jnl->old_start_lock, jnl_mutex_group, jnl_lock_attr);
-
-    if (kmem_alloc(kernel_map, (vm_offset_t *)&jnl->header_buf, phys_blksz)) {
-               printf("jnl: create: could not allocate space for header buffer (%d bytes)\n", phys_blksz);
+                        void         *arg,
+                        struct mount *fsmount)
+{
+       journal         *jnl;
+       uint32_t        orig_blksz=0;
+       uint32_t        phys_blksz;
+       u_int32_t       min_size = 0;
+       int             orig_checksum, checksum;
+       struct vfs_context context;
+       const char      *jdev_name = vnode_getname_printable(jvp);
+
+       context.vc_thread = current_thread();
+       context.vc_ucred = FSCRED;
+
+       /* Get the real physical block size. */
+       if (VNOP_IOCTL(jvp, DKIOCGETBLOCKSIZE, (caddr_t)&phys_blksz, 0, &context)) {
+               goto cleanup_jdev_name;
+       }
+
+       if (phys_blksz > min_fs_blksz) {
+               printf("jnl: %s: open: error: phys blksize %u bigger than min fs blksize %zd\n",
+                      jdev_name, phys_blksz, min_fs_blksz);
+               goto cleanup_jdev_name;
+       }
+
+       if (journal_size < (256*1024) || journal_size > (1024*1024*1024)) {
+               printf("jnl: %s: open: journal size %lld looks bogus.\n", jdev_name, journal_size);
+               goto cleanup_jdev_name;
+       }
+
+       min_size = phys_blksz * (phys_blksz / sizeof(block_info));
+       /* Reject journals that are too small given the sector size of the device */
+       if (journal_size < min_size) {
+               printf("jnl: %s: open: journal size (%lld) too small given sector size of (%u)\n", 
+                               jdev_name, journal_size, phys_blksz);
+               goto cleanup_jdev_name;
+       }
+    
+       if ((journal_size % phys_blksz) != 0) {
+               printf("jnl: %s: open: journal size 0x%llx is not an even multiple of block size 0x%x\n",
+                      jdev_name, journal_size, phys_blksz);
+               goto cleanup_jdev_name;
+       }
+
+       MALLOC_ZONE(jnl, struct journal *, sizeof(struct journal), M_JNL_JNL, M_WAITOK);
+       memset(jnl, 0, sizeof(*jnl));
+
+       jnl->jdev         = jvp;
+       jnl->jdev_offset  = offset;
+       jnl->fsdev        = fsvp;
+       jnl->flush        = flush;
+       jnl->flush_arg    = arg;
+       jnl->flags        = (flags & JOURNAL_OPTION_FLAGS_MASK);
+       jnl->jdev_name    = jdev_name;
+       lck_mtx_init(&jnl->old_start_lock, jnl_mutex_group, jnl_lock_attr);
+
+       /* We need a reference to the mount to later pass to the throttling code for
+        * IO accounting.
+        */
+       jnl->fsmount      = fsmount;
+       mount_ref(fsmount, 0);
+
+       get_io_info(jvp, phys_blksz, jnl, &context);
+
+       if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&jnl->header_buf, phys_blksz)) {
+               printf("jnl: %s: create: could not allocate space for header buffer (%u bytes)\n", jdev_name, phys_blksz);
                goto bad_kmem_alloc;
-    }
+       }
+       jnl->header_buf_size = phys_blksz;
 
-    jnl->jhdr = (journal_header *)jnl->header_buf;
-    memset(jnl->jhdr, 0, sizeof(journal_header)+4);
+       jnl->jhdr = (journal_header *)jnl->header_buf;
+       memset(jnl->jhdr, 0, sizeof(journal_header));
 
-    // we have to set this up here so that do_journal_io() will work
-    jnl->jhdr->jhdr_size = phys_blksz;
+       // we have to set this up here so that do_journal_io() will work
+       jnl->jhdr->jhdr_size = phys_blksz;
 
-    if (read_journal_header(jnl, jnl->jhdr, phys_blksz) != phys_blksz) {
-               printf("jnl: open: could not read %d bytes for the journal header.\n",
-                          phys_blksz);
+       if (read_journal_header(jnl, jnl->jhdr, phys_blksz) != phys_blksz) {
+               printf("jnl: %s: open: could not read %u bytes for the journal header.\n",
+                      jdev_name, phys_blksz);
                goto bad_journal;
-    }
+       }
 
        orig_checksum = jnl->jhdr->checksum;
        jnl->jhdr->checksum = 0;
@@ -1384,25 +1900,25 @@ journal_open(struct vnode *jvp,
        if (jnl->jhdr->magic == SWAP32(JOURNAL_HEADER_MAGIC)) {
                // do this before the swap since it's done byte-at-a-time
                orig_checksum = SWAP32(orig_checksum);
-               checksum = calc_checksum((char *)jnl->jhdr, sizeof(struct journal_header));
+               checksum = calc_checksum((char *)jnl->jhdr, JOURNAL_HEADER_CKSUM_SIZE);
                swap_journal_header(jnl);
                jnl->flags |= JOURNAL_NEED_SWAP;
        } else {
-               checksum = calc_checksum((char *)jnl->jhdr, sizeof(struct journal_header));
+               checksum = calc_checksum((char *)jnl->jhdr, JOURNAL_HEADER_CKSUM_SIZE);
        }
 
-    if (jnl->jhdr->magic != JOURNAL_HEADER_MAGIC && jnl->jhdr->magic != OLD_JOURNAL_HEADER_MAGIC) {
-               printf("jnl: open: journal magic is bad (0x%x != 0x%x)\n",
-                          jnl->jhdr->magic, JOURNAL_HEADER_MAGIC);
+       if (jnl->jhdr->magic != JOURNAL_HEADER_MAGIC && jnl->jhdr->magic != OLD_JOURNAL_HEADER_MAGIC) {
+               printf("jnl: %s: open: journal magic is bad (0x%x != 0x%x)\n",
+                      jnl->jdev_name, jnl->jhdr->magic, JOURNAL_HEADER_MAGIC);
                goto bad_journal;
-    }
+       }
 
        // only check if we're the current journal header magic value
        if (jnl->jhdr->magic == JOURNAL_HEADER_MAGIC) {
 
                if (orig_checksum != checksum) {
-                       printf("jnl: open: journal checksum is bad (0x%x != 0x%x)\n",
-                                  orig_checksum, checksum);
+                       printf("jnl: %s: open: journal checksum is bad (0x%x != 0x%x)\n",
+                              jdev_name, orig_checksum, checksum);
                                   
                        //goto bad_journal;
                }
@@ -1413,39 +1929,44 @@ journal_open(struct vnode *jvp,
                jnl->jhdr->magic = JOURNAL_HEADER_MAGIC;
        }
 
-    if (phys_blksz != jnl->jhdr->jhdr_size && jnl->jhdr->jhdr_size != 0) {
-               printf("jnl: open: phys_blksz %d does not match journal header size %d\n",
-                          phys_blksz, jnl->jhdr->jhdr_size);
-
+       if (phys_blksz != (size_t)jnl->jhdr->jhdr_size && jnl->jhdr->jhdr_size != 0) {
+               /*
+                * The volume has probably been resized (such that we had to adjust the
+                * logical sector size), or copied to media with a different logical
+                * sector size.
+                * 
+                * Temporarily change the device's logical block size to match the
+                * journal's header size.  This will allow us to replay the journal
+                * safely.  If the replay succeeds, we will update the journal's header
+                * size (later in this function).
+                */
                orig_blksz = phys_blksz;
                phys_blksz = jnl->jhdr->jhdr_size;
-               if (VNOP_IOCTL(jvp, DKIOCSETBLOCKSIZE, (caddr_t)&phys_blksz, FWRITE, &context)) {
-                       printf("jnl: could not set block size to %d bytes.\n", phys_blksz);
-                       goto bad_journal;
-               }
-//             goto bad_journal;
-    }
+               VNOP_IOCTL(jvp, DKIOCSETBLOCKSIZE, (caddr_t)&phys_blksz, FWRITE, &context);
+               printf("jnl: %s: open: temporarily switched block size from %u to %u\n",
+                          jdev_name, orig_blksz, phys_blksz);
+       }
 
-    if (   jnl->jhdr->start <= 0
-                  || jnl->jhdr->start > jnl->jhdr->size
-                  || jnl->jhdr->start > 1024*1024*1024) {
-               printf("jnl: open: jhdr start looks bad (0x%llx max size 0x%llx)\n",
-                          jnl->jhdr->start, jnl->jhdr->size);
+       if (   jnl->jhdr->start <= 0
+              || jnl->jhdr->start > jnl->jhdr->size
+              || jnl->jhdr->start > 1024*1024*1024) {
+               printf("jnl: %s: open: jhdr start looks bad (0x%llx max size 0x%llx)\n",
+                      jdev_name, jnl->jhdr->start, jnl->jhdr->size);
                goto bad_journal;
-    }
+       }
 
-    if (   jnl->jhdr->end <= 0
-                  || jnl->jhdr->end > jnl->jhdr->size
-                  || jnl->jhdr->end > 1024*1024*1024) {
-               printf("jnl: open: jhdr end looks bad (0x%llx max size 0x%llx)\n",
-                          jnl->jhdr->end, jnl->jhdr->size);
+       if (   jnl->jhdr->end <= 0
+              || jnl->jhdr->end > jnl->jhdr->size
+              || jnl->jhdr->end > 1024*1024*1024) {
+               printf("jnl: %s: open: jhdr end looks bad (0x%llx max size 0x%llx)\n",
+                      jdev_name, jnl->jhdr->end, jnl->jhdr->size);
                goto bad_journal;
-    }
+       }
 
-    if (jnl->jhdr->size > 1024*1024*1024) {
-               printf("jnl: open: jhdr size looks bad (0x%llx)\n", jnl->jhdr->size);
+       if (jnl->jhdr->size < (256*1024) || jnl->jhdr->size > 1024*1024*1024) {
+               printf("jnl: %s: open: jhdr size looks bad (0x%llx)\n", jdev_name, jnl->jhdr->size);
                goto bad_journal;
-    }
+       }
 
 // XXXdbg - can't do these checks because hfs writes all kinds of
 //          non-uniform sized blocks even on devices that have a block size
@@ -1453,84 +1974,242 @@ journal_open(struct vnode *jvp,
 //          therefore these checks will fail and so we just have to punt and
 //          do more relaxed checking...
 // XXXdbg    if ((jnl->jhdr->start % jnl->jhdr->jhdr_size) != 0) {
-    if ((jnl->jhdr->start % 512) != 0) {
-               printf("jnl: open: journal start (0x%llx) not a multiple of 512?\n",
-                          jnl->jhdr->start);
+       if ((jnl->jhdr->start % 512) != 0) {
+               printf("jnl: %s: open: journal start (0x%llx) not a multiple of 512?\n",
+                      jdev_name, jnl->jhdr->start);
                goto bad_journal;
-    }
+       }
 
 //XXXdbg    if ((jnl->jhdr->end % jnl->jhdr->jhdr_size) != 0) {
-    if ((jnl->jhdr->end % 512) != 0) {
-               printf("jnl: open: journal end (0x%llx) not a multiple of block size (0x%x)?\n",
-                          jnl->jhdr->end, jnl->jhdr->jhdr_size);
+       if ((jnl->jhdr->end % 512) != 0) {
+               printf("jnl: %s: open: journal end (0x%llx) not a multiple of block size (0x%x)?\n",
+                      jdev_name, jnl->jhdr->end, jnl->jhdr->jhdr_size);
                goto bad_journal;
-    }
+       }
 
-    // take care of replaying the journal if necessary
+       // take care of replaying the journal if necessary
        if (flags & JOURNAL_RESET) {
-               printf("jnl: journal start/end pointers reset! (jnl 0x%x; s 0x%llx e 0x%llx)\n",
-                          jnl, jnl->jhdr->start, jnl->jhdr->end);
+               printf("jnl: %s: journal start/end pointers reset! (jnl %p; s 0x%llx e 0x%llx)\n",
+                      jdev_name, jnl, jnl->jhdr->start, jnl->jhdr->end);
                jnl->jhdr->start = jnl->jhdr->end;
        } else if (replay_journal(jnl) != 0) {
-               printf("jnl: journal_open: Error replaying the journal!\n");
+               printf("jnl: %s: journal_open: Error replaying the journal!\n", jdev_name);
                goto bad_journal;
-    }
-
+       }
+       
+       /*
+        * When we get here, we know that the journal is empty (jnl->jhdr->start ==
+        * jnl->jhdr->end).  If the device's logical block size was different from
+        * the journal's header size, then we can now restore the device's logical
+        * block size and update the journal's header size to match.
+        *
+        * Note that we also adjust the journal's start and end so that they will
+        * be aligned on the new block size.  We pick a new sequence number to
+        * avoid any problems if a replay found previous transactions using the old
+        * journal header size.  (See the comments in journal_create(), above.)
+        */
+       
        if (orig_blksz != 0) {
                VNOP_IOCTL(jvp, DKIOCSETBLOCKSIZE, (caddr_t)&orig_blksz, FWRITE, &context);
                phys_blksz = orig_blksz;
-               if (orig_blksz < jnl->jhdr->jhdr_size) {
-                       printf("jnl: open: jhdr_size is %d but orig phys blk size is %d.  switching.\n",
-                                  jnl->jhdr->jhdr_size, orig_blksz);
-                                  
-                       jnl->jhdr->jhdr_size = orig_blksz;
+               
+               orig_blksz = 0;
+               
+               jnl->jhdr->jhdr_size = phys_blksz;
+               jnl->jhdr->start = phys_blksz;
+               jnl->jhdr->end = phys_blksz;
+               jnl->jhdr->sequence_num = (jnl->jhdr->sequence_num +
+                                                                  (journal_size / phys_blksz) +
+                                                                  (random() % 16384)) & 0x00ffffff;
+               
+               if (write_journal_header(jnl, 1, jnl->jhdr->sequence_num)) {
+                       printf("jnl: %s: open: failed to update journal header size\n", jdev_name);
+                       goto bad_journal;
                }
        }
 
        // make sure this is in sync!
        jnl->active_start = jnl->jhdr->start;
+       jnl->sequence_num = jnl->jhdr->sequence_num;
+
+       // set this now, after we've replayed the journal
+       size_up_tbuffer(jnl, tbuffer_size, phys_blksz);
 
-    // set this now, after we've replayed the journal
-    size_up_tbuffer(jnl, tbuffer_size, phys_blksz);
+       // TODO: Does this need to change if the device's logical block size changed?
+       if ((off_t)(jnl->jhdr->blhdr_size/sizeof(block_info)-1) > (jnl->jhdr->size/jnl->jhdr->jhdr_size)) {
+               printf("jnl: %s: open: jhdr size and blhdr size are not compatible (0x%llx, %d, %d)\n", jdev_name, jnl->jhdr->size,
+                      jnl->jhdr->blhdr_size, jnl->jhdr->jhdr_size);
+               goto bad_journal;
+       }
 
        lck_mtx_init(&jnl->jlock, jnl_mutex_group, jnl_lock_attr);
+       lck_mtx_init(&jnl->flock, jnl_mutex_group, jnl_lock_attr);
+       lck_rw_init(&jnl->trim_lock, jnl_mutex_group, jnl_lock_attr);
 
-    return jnl;
+       goto journal_open_complete;
 
-  bad_journal:
+bad_journal:
        if (orig_blksz != 0) {
                phys_blksz = orig_blksz;
                VNOP_IOCTL(jvp, DKIOCSETBLOCKSIZE, (caddr_t)&orig_blksz, FWRITE, &context);
+               printf("jnl: %s: open: restored block size after error\n", jdev_name);
        }
-    kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, phys_blksz);
-  bad_kmem_alloc:
+       kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, phys_blksz);
+bad_kmem_alloc:
        FREE_ZONE(jnl, sizeof(struct journal), M_JNL_JNL);
-    return NULL;    
+       mount_drop(fsmount, 0);
+cleanup_jdev_name:
+       vnode_putname_printable(jdev_name);
+       jnl = NULL;
+journal_open_complete:
+       return jnl;    
+}
+
+
+int
+journal_is_clean(struct vnode *jvp,
+                off_t         offset,
+                off_t         journal_size,
+                struct vnode *fsvp,
+                 size_t        min_fs_block_size)
+{
+       journal         jnl;
+       uint32_t        phys_blksz;
+       int             ret;
+       int             orig_checksum, checksum;
+       struct vfs_context context;
+       const           char *jdev_name = vnode_getname_printable(jvp);
+
+       context.vc_thread = current_thread();
+       context.vc_ucred = FSCRED;
+
+       /* Get the real physical block size. */
+       if (VNOP_IOCTL(jvp, DKIOCGETBLOCKSIZE, (caddr_t)&phys_blksz, 0, &context)) {
+               printf("jnl: %s: is_clean: failed to get device block size.\n", jdev_name);
+               ret = EINVAL;
+               goto cleanup_jdev_name;
+       }
+
+       if (phys_blksz > (uint32_t)min_fs_block_size) {
+               printf("jnl: %s: is_clean: error: phys blksize %d bigger than min fs blksize %zd\n",
+                      jdev_name, phys_blksz, min_fs_block_size);
+               ret = EINVAL;
+               goto cleanup_jdev_name;
+       }
+
+       if (journal_size < (256*1024) || journal_size > (MAX_JOURNAL_SIZE)) {
+               printf("jnl: %s: is_clean: journal size %lld looks bogus.\n", jdev_name, journal_size);
+               ret = EINVAL;
+               goto cleanup_jdev_name;
+       }
+    
+       if ((journal_size % phys_blksz) != 0) {
+               printf("jnl: %s: is_clean: journal size 0x%llx is not an even multiple of block size 0x%x\n",
+                      jdev_name, journal_size, phys_blksz);
+               ret = EINVAL;
+               goto cleanup_jdev_name;
+       }
+
+       memset(&jnl, 0, sizeof(jnl));
+
+       if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&jnl.header_buf, phys_blksz)) {
+               printf("jnl: %s: is_clean: could not allocate space for header buffer (%d bytes)\n", jdev_name, phys_blksz);
+               ret = ENOMEM;
+               goto cleanup_jdev_name;
+       }
+       jnl.header_buf_size = phys_blksz;
+
+       get_io_info(jvp, phys_blksz, &jnl, &context);
+    
+       jnl.jhdr = (journal_header *)jnl.header_buf;
+       memset(jnl.jhdr, 0, sizeof(journal_header));
+
+       jnl.jdev        = jvp;
+       jnl.jdev_offset = offset;
+       jnl.fsdev       = fsvp;
+
+       // we have to set this up here so that do_journal_io() will work
+       jnl.jhdr->jhdr_size = phys_blksz;
+
+       if (read_journal_header(&jnl, jnl.jhdr, phys_blksz) != (unsigned)phys_blksz) {
+               printf("jnl: %s: is_clean: could not read %d bytes for the journal header.\n",
+                      jdev_name, phys_blksz);
+               ret = EINVAL;
+               goto get_out;
+       }
+
+       orig_checksum = jnl.jhdr->checksum;
+       jnl.jhdr->checksum = 0;
+
+       if (jnl.jhdr->magic == SWAP32(JOURNAL_HEADER_MAGIC)) {
+               // do this before the swap since it's done byte-at-a-time
+               orig_checksum = SWAP32(orig_checksum);
+               checksum = calc_checksum((char *)jnl.jhdr, JOURNAL_HEADER_CKSUM_SIZE);
+               swap_journal_header(&jnl);
+               jnl.flags |= JOURNAL_NEED_SWAP;
+       } else {
+               checksum = calc_checksum((char *)jnl.jhdr, JOURNAL_HEADER_CKSUM_SIZE);
+       }
+
+       if (jnl.jhdr->magic != JOURNAL_HEADER_MAGIC && jnl.jhdr->magic != OLD_JOURNAL_HEADER_MAGIC) {
+               printf("jnl: %s: is_clean: journal magic is bad (0x%x != 0x%x)\n",
+                      jdev_name, jnl.jhdr->magic, JOURNAL_HEADER_MAGIC);
+               ret = EINVAL;
+               goto get_out;
+       }
+
+       if (orig_checksum != checksum) {
+               printf("jnl: %s: is_clean: journal checksum is bad (0x%x != 0x%x)\n", jdev_name, orig_checksum, checksum);
+               ret = EINVAL;
+               goto get_out;
+       }
+
+       //
+       // if the start and end are equal then the journal is clean.
+       // otherwise it's not clean and therefore an error.
+       //
+       if (jnl.jhdr->start == jnl.jhdr->end) {
+               ret = 0;
+       } else {
+               ret = EBUSY;    // so the caller can differentiate an invalid journal from a "busy" one
+       }
+
+get_out:
+       kmem_free(kernel_map, (vm_offset_t)jnl.header_buf, phys_blksz);
+cleanup_jdev_name:
+       vnode_putname_printable(jdev_name);
+       return ret;
 }
 
+
 void
 journal_close(journal *jnl)
 {
-    volatile off_t *start, *end;
-    int             counter=0;
+       volatile off_t *start, *end;
+       int             counter=0;
 
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
 
        // set this before doing anything that would block so that
        // we start tearing things down properly.
        //
        jnl->flags |= JOURNAL_CLOSE_PENDING;
 
-    if (jnl->owner != current_thread()) {
+       if (jnl->owner != current_thread()) {
                lock_journal(jnl);
-    }
+       }
 
-    //
-    // only write stuff to disk if the journal is still valid
-    //
-    if ((jnl->flags & JOURNAL_INVALID) == 0) {
+       wait_condition(jnl, &jnl->flushing, "journal_close");
+
+       //
+       // only write stuff to disk if the journal is still valid
+       //
+       if ((jnl->flags & JOURNAL_INVALID) == 0) {
 
                if (jnl->active_tr) {
+                       /*
+                        * "journal_end_transaction" will fire the flush asynchronously
+                        */
                        journal_end_transaction(jnl);
                }
                
@@ -1539,37 +2218,48 @@ journal_close(journal *jnl)
                        transaction *tr = jnl->cur_tr;
 
                        jnl->cur_tr = NULL;
-                       end_transaction(tr, 1);   // force it to get flushed
+                       /*
+                        * "end_transaction" will wait for any in-progress flush to complete
+                        * before flushing "cur_tr" synchronously("must_wait" == TRUE)
+                        */
+                       end_transaction(tr, 1, NULL, NULL, FALSE, TRUE);
                }
+               /*
+                * if there was an "active_tr", make sure we wait for
+                * it to flush if there was no "cur_tr" to process
+                */
+               wait_condition(jnl, &jnl->flushing, "journal_close");
     
                //start = &jnl->jhdr->start;
                start = &jnl->active_start;
                end   = &jnl->jhdr->end;
     
-               while (*start != *end && counter++ < 500) {
-                       printf("jnl: close: flushing the buffer cache (start 0x%llx end 0x%llx)\n", *start, *end);
+               while (*start != *end && counter++ < 5000) {
+                       //printf("jnl: close: flushing the buffer cache (start 0x%llx end 0x%llx)\n", *start, *end);
                        if (jnl->flush) {
                                jnl->flush(jnl->flush_arg);
                        }
-                       tsleep((caddr_t)jnl, PRIBIO, "jnl_close", 1);
+                       tsleep((caddr_t)jnl, PRIBIO, "jnl_close", 2);
                }
 
                if (*start != *end) {
-                       printf("jnl: close: buffer flushing didn't seem to flush out all the transactions! (0x%llx - 0x%llx)\n",
-                                  *start, *end);
+                       printf("jnl: %s: close: buffer flushing didn't seem to flush out all the transactions! (0x%llx - 0x%llx)\n",
+                              jnl->jdev_name, *start, *end);
                }
 
                // make sure this is in sync when we close the journal
                jnl->jhdr->start = jnl->active_start;
 
                // if this fails there's not much we can do at this point...
-               write_journal_header(jnl);
-    } else {
+               write_journal_header(jnl, 1, jnl->sequence_num);
+       } else {
                // if we're here the journal isn't valid any more.
                // so make sure we don't leave any locked blocks lying around
-               printf("jnl: close: journal 0x%x, is invalid.  aborting outstanding transactions\n", jnl);
+               printf("jnl: %s: close: journal %p, is invalid.  aborting outstanding transactions\n", jnl->jdev_name, jnl);
+
                if (jnl->active_tr || jnl->cur_tr) {
                        transaction *tr;
+
                        if (jnl->active_tr) {
                                tr = jnl->active_tr;
                                jnl->active_tr = NULL;
@@ -1577,41 +2267,51 @@ journal_close(journal *jnl)
                                tr = jnl->cur_tr;
                                jnl->cur_tr = NULL;
                        }
-
                        abort_transaction(jnl, tr);
+
                        if (jnl->active_tr || jnl->cur_tr) {
-                               panic("jnl: close: jnl @ 0x%x had both an active and cur tr\n", jnl);
+                               panic("jnl: %s: close: jnl @ %p had both an active and cur tr\n", jnl->jdev_name, jnl);
                        }
                }
-    }
+       }
 
-    free_old_stuff(jnl);
+       free_old_stuff(jnl);
 
-    kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, jnl->jhdr->jhdr_size);
-    jnl->jhdr = (void *)0xbeefbabe;
+       kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, jnl->header_buf_size);
+       jnl->jhdr = (void *)0xbeefbabe;
 
+       // Release reference on the mount
+       if (jnl->fsmount)
+                mount_drop(jnl->fsmount, 0);
+
+       vnode_putname_printable(jnl->jdev_name);
+
+       unlock_journal(jnl);
+       lck_mtx_destroy(&jnl->old_start_lock, jnl_mutex_group);
+       lck_mtx_destroy(&jnl->jlock, jnl_mutex_group);
+       lck_mtx_destroy(&jnl->flock, jnl_mutex_group);
        FREE_ZONE(jnl, sizeof(struct journal), M_JNL_JNL);
 }
 
 static void
 dump_journal(journal *jnl)
 {
-    transaction *ctr;
-
-    printf("journal:");
-    printf("  jdev_offset %.8llx\n", jnl->jdev_offset);
-    printf("  magic: 0x%.8x\n", jnl->jhdr->magic);
-    printf("  start: 0x%.8llx\n", jnl->jhdr->start);
-    printf("  end:   0x%.8llx\n", jnl->jhdr->end);
-    printf("  size:  0x%.8llx\n", jnl->jhdr->size);
-    printf("  blhdr size: %d\n", jnl->jhdr->blhdr_size);
-    printf("  jhdr size: %d\n", jnl->jhdr->jhdr_size);
-    printf("  chksum: 0x%.8x\n", jnl->jhdr->checksum);
+       transaction *ctr;
+
+       printf("journal for dev %s:", jnl->jdev_name);
+       printf("  jdev_offset %.8llx\n", jnl->jdev_offset);
+       printf("  magic: 0x%.8x\n", jnl->jhdr->magic);
+       printf("  start: 0x%.8llx\n", jnl->jhdr->start);
+       printf("  end:   0x%.8llx\n", jnl->jhdr->end);
+       printf("  size:  0x%.8llx\n", jnl->jhdr->size);
+       printf("  blhdr size: %d\n", jnl->jhdr->blhdr_size);
+       printf("  jhdr size: %d\n", jnl->jhdr->jhdr_size);
+       printf("  chksum: 0x%.8x\n", jnl->jhdr->checksum);
     
-    printf("  completed transactions:\n");
-    for(ctr=jnl->completed_trs; ctr; ctr=ctr->next) {
+       printf("  completed transactions:\n");
+       for (ctr = jnl->completed_trs; ctr; ctr = ctr->next) {
                printf("    0x%.8llx - 0x%.8llx\n", ctr->journal_start, ctr->journal_end);
-    }
+       }
 }
 
 
@@ -1619,18 +2319,18 @@ dump_journal(journal *jnl)
 static off_t
 free_space(journal *jnl)
 {
-    off_t free_space;
+       off_t free_space_offset;
        
-    if (jnl->jhdr->start < jnl->jhdr->end) {
-               free_space = jnl->jhdr->size - (jnl->jhdr->end - jnl->jhdr->start) - jnl->jhdr->jhdr_size;
-    } else if (jnl->jhdr->start > jnl->jhdr->end) {
-               free_space = jnl->jhdr->start - jnl->jhdr->end;
-    } else {
+       if (jnl->jhdr->start < jnl->jhdr->end) {
+               free_space_offset = jnl->jhdr->size - (jnl->jhdr->end - jnl->jhdr->start) - jnl->jhdr->jhdr_size;
+       } else if (jnl->jhdr->start > jnl->jhdr->end) {
+               free_space_offset = jnl->jhdr->start - jnl->jhdr->end;
+       } else {
                // journal is completely empty
-               free_space = jnl->jhdr->size - jnl->jhdr->jhdr_size;
-    }
+               free_space_offset = jnl->jhdr->size - jnl->jhdr->jhdr_size;
+       }
 
-    return free_space;
+       return free_space_offset;
 }
 
 
@@ -1639,46 +2339,50 @@ free_space(journal *jnl)
 // The "desired_size" is in bytes.
 //
 static int
-check_free_space(journal *jnl, int desired_size)
+check_free_space(journal *jnl, int desired_size, boolean_t *delayed_header_write, uint32_t sequence_num)
 {
-    int    i, counter=0;
+       size_t  i;
+       int     counter=0;
 
-    //printf("jnl: check free space (desired 0x%x, avail 0x%Lx)\n",
-//        desired_size, free_space(jnl));
+       //printf("jnl: check free space (desired 0x%x, avail 0x%Lx)\n",
+        //        desired_size, free_space(jnl));
+
+       if (delayed_header_write)
+               *delayed_header_write = FALSE;
     
-    while (1) {
+       while (1) {
                int old_start_empty;
                
+               // make sure there's space in the journal to hold this transaction
+               if (free_space(jnl) > desired_size && jnl->old_start[0] == 0) {
+                       break;
+               }
                if (counter++ == 5000) {
                        dump_journal(jnl);
                        panic("jnl: check_free_space: buffer flushing isn't working "
-                                 "(jnl @ 0x%x s %lld e %lld f %lld [active start %lld]).\n", jnl,
-                                 jnl->jhdr->start, jnl->jhdr->end, free_space(jnl), jnl->active_start);
+                             "(jnl @ %p s %lld e %lld f %lld [active start %lld]).\n", jnl,
+                             jnl->jhdr->start, jnl->jhdr->end, free_space(jnl), jnl->active_start);
                }
                if (counter > 7500) {
-                       printf("jnl: check_free_space: giving up waiting for free space.\n");
+                       printf("jnl: %s: check_free_space: giving up waiting for free space.\n", jnl->jdev_name);
                        return ENOSPC;
                }
 
-               // make sure there's space in the journal to hold this transaction
-               if (free_space(jnl) > desired_size) {
-                       break;
-               }
-
                //
                // here's where we lazily bump up jnl->jhdr->start.  we'll consume
                // entries until there is enough space for the next transaction.
                //
                old_start_empty = 1;
                lock_oldstart(jnl);
-               for(i=0; i < sizeof(jnl->old_start)/sizeof(jnl->old_start[0]); i++) {
-                       int   counter;
 
-                       counter = 0;
+               for (i = 0; i < sizeof(jnl->old_start)/sizeof(jnl->old_start[0]); i++) {
+                       int   lcl_counter;
+
+                       lcl_counter = 0;
                        while (jnl->old_start[i] & 0x8000000000000000LL) {
-                               if (counter++ > 100) {
-                                       panic("jnl: check_free_space: tr starting @ 0x%llx not flushing (jnl 0x%x).\n",
-                                                 jnl->old_start[i], jnl);
+                               if (lcl_counter++ > 10000) {
+                                       panic("jnl: check_free_space: tr starting @ 0x%llx not flushing (jnl %p).\n",
+                                             jnl->old_start[i], jnl);
                                }
                                
                                unlock_oldstart(jnl);
@@ -1696,10 +2400,16 @@ check_free_space(journal *jnl, int desired_size)
                        old_start_empty   = 0;
                        jnl->jhdr->start  = jnl->old_start[i];
                        jnl->old_start[i] = 0;
+
                        if (free_space(jnl) > desired_size) {
-                               unlock_oldstart(jnl);
-                               write_journal_header(jnl);
-                               lock_oldstart(jnl);
+                               
+                               if (delayed_header_write)
+                                       *delayed_header_write = TRUE;
+                               else {
+                                       unlock_oldstart(jnl);
+                                       write_journal_header(jnl, 1, sequence_num);
+                                       lock_oldstart(jnl);
+                               }
                                break;
                        }
                }
@@ -1719,7 +2429,11 @@ check_free_space(journal *jnl, int desired_size)
                        // start of the loop.
                        //
                        jnl->jhdr->start = jnl->active_start;
-                       write_journal_header(jnl);
+                       
+                       if (delayed_header_write)
+                               *delayed_header_write = TRUE;
+                       else
+                               write_journal_header(jnl, 1, sequence_num);
                        continue;
                }
 
@@ -1734,93 +2448,120 @@ check_free_space(journal *jnl, int desired_size)
                // wait for a while to avoid being cpu-bound (this will
                // put us to sleep for 10 milliseconds)
                tsleep((caddr_t)jnl, PRIBIO, "check_free_space2", 1);
-    }
+       }
 
-    return 0;
+       return 0;
+}
+
+/*
+ * Allocate a new active transaction.
+ */
+static errno_t
+journal_allocate_transaction(journal *jnl)
+{
+       transaction *tr;
+       
+       MALLOC_ZONE(tr, transaction *, sizeof(transaction), M_JNL_TR, M_WAITOK);
+       memset(tr, 0, sizeof(transaction));
+
+       tr->tbuffer_size = jnl->tbuffer_size;
+
+       if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&tr->tbuffer, tr->tbuffer_size)) {
+               FREE_ZONE(tr, sizeof(transaction), M_JNL_TR);
+               jnl->active_tr = NULL;
+               return ENOMEM;
+       }
+
+       // journal replay code checksum check depends on this.
+       memset(tr->tbuffer, 0, BLHDR_CHECKSUM_SIZE);
+       // Fill up the rest of the block with unimportant bytes (0x5a 'Z' chosen for visibility)
+       memset(tr->tbuffer + BLHDR_CHECKSUM_SIZE, 0x5a, jnl->jhdr->blhdr_size - BLHDR_CHECKSUM_SIZE);
+
+       tr->blhdr = (block_list_header *)tr->tbuffer;
+       tr->blhdr->max_blocks = (jnl->jhdr->blhdr_size / sizeof(block_info)) - 1;
+       tr->blhdr->num_blocks = 1;      // accounts for this header block
+       tr->blhdr->bytes_used = jnl->jhdr->blhdr_size;
+       tr->blhdr->flags = BLHDR_CHECK_CHECKSUMS | BLHDR_FIRST_HEADER;
+
+       tr->sequence_num = ++jnl->sequence_num;
+       tr->num_blhdrs  = 1;
+       tr->total_bytes = jnl->jhdr->blhdr_size;
+       tr->jnl         = jnl;
+
+       jnl->active_tr  = tr;
+       
+       return 0;
 }
 
 int
 journal_start_transaction(journal *jnl)
 {
-    int ret;
-    transaction *tr;
+       int ret;
 
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
     
-    if (jnl->flags & JOURNAL_INVALID) {
-               return EINVAL;
-    }
+       free_old_stuff(jnl);
 
-    if (jnl->owner == current_thread()) {
+       if (jnl->flags & JOURNAL_INVALID) {
+               return EINVAL;
+       }
+       if (jnl->owner == current_thread()) {
                if (jnl->active_tr == NULL) {
-                       panic("jnl: start_tr: active_tr is NULL (jnl @ 0x%x, owner 0x%x, current_thread 0x%x\n",
-                                 jnl, jnl->owner, current_thread());
+                       panic("jnl: start_tr: active_tr is NULL (jnl @ %p, owner %p, current_thread %p\n",
+                             jnl, jnl->owner, current_thread());
                }
                jnl->nested_count++;
                return 0;
-    }
+       }
+       lock_journal(jnl);
 
-    lock_journal(jnl);
+       if (jnl->owner != NULL || jnl->nested_count != 0 || jnl->active_tr != NULL) {
+               panic("jnl: start_tr: owner %p, nested count %d, active_tr %p jnl @ %p\n",
+                     jnl->owner, jnl->nested_count, jnl->active_tr, jnl);
+       }
 
-    if (jnl->owner != NULL || jnl->nested_count != 0 || jnl->active_tr != NULL) {
-               panic("jnl: start_tr: owner 0x%x, nested count 0x%x, active_tr 0x%x jnl @ 0x%x\n",
-                         jnl->owner, jnl->nested_count, jnl->active_tr, jnl);
-    }
+       jnl->owner = current_thread();
+       jnl->nested_count = 1;
 
-    jnl->owner        = current_thread();
-    jnl->nested_count = 1;
+#if JOE
+       // make sure there's room in the journal
+       if (free_space(jnl) < jnl->tbuffer_size) {
 
-    free_old_stuff(jnl);
+               KERNEL_DEBUG(0xbbbbc030 | DBG_FUNC_START, jnl, 0, 0, 0, 0);
 
-    // make sure there's room in the journal
-    if (check_free_space(jnl, jnl->tbuffer_size) != 0) {
-               printf("jnl: start transaction failed: no space\n");
-               ret = ENOSPC;
-               goto bad_start;
-    }
+               // this is the call that really waits for space to free up
+               // as well as updating jnl->jhdr->start
+               if (check_free_space(jnl, jnl->tbuffer_size, NULL, jnl->sequence_num) != 0) {
+                       printf("jnl: %s: start transaction failed: no space\n", jnl->jdev_name);
+                       ret = ENOSPC;
+                       goto bad_start;
+               }
+               KERNEL_DEBUG(0xbbbbc030 | DBG_FUNC_END, jnl, 0, 0, 0, 0);
+       }
+#endif
 
-    // if there's a buffered transaction, use it.
-    if (jnl->cur_tr) {
+       // if there's a buffered transaction, use it.
+       if (jnl->cur_tr) {
                jnl->active_tr = jnl->cur_tr;
                jnl->cur_tr    = NULL;
 
                return 0;
-    }
-
-       MALLOC_ZONE(tr, transaction *, sizeof(transaction), M_JNL_TR, M_WAITOK);
-    memset(tr, 0, sizeof(transaction));
-
-    tr->tbuffer_size = jnl->tbuffer_size;
+       }
 
-    if (kmem_alloc(kernel_map, (vm_offset_t *)&tr->tbuffer, tr->tbuffer_size)) {
-               FREE_ZONE(tr, sizeof(transaction), M_JNL_TR);
-               printf("jnl: start transaction failed: no tbuffer mem\n");
-               ret = ENOMEM;
+       ret = journal_allocate_transaction(jnl);
+       if (ret) {
                goto bad_start;
-    }
-
-    // journal replay code checksum check depends on this.
-    memset(tr->tbuffer, 0, BLHDR_CHECKSUM_SIZE);
-
-    tr->blhdr = (block_list_header *)tr->tbuffer;
-    tr->blhdr->max_blocks = (jnl->jhdr->blhdr_size / sizeof(block_info)) - 1;
-    tr->blhdr->num_blocks = 1;      // accounts for this header block
-    tr->blhdr->bytes_used = jnl->jhdr->blhdr_size;
-
-    tr->num_blhdrs  = 1;
-    tr->total_bytes = jnl->jhdr->blhdr_size;
-    tr->jnl         = jnl;
-
-    jnl->active_tr    = tr;
+       }
 
-    // printf("jnl: start_tr: owner 0x%x new tr @ 0x%x\n", jnl->owner, tr);
+       // printf("jnl: start_tr: owner 0x%x new tr @ 0x%x\n", jnl->owner, jnl->active_tr);
 
-    return 0;
+       return 0;
 
-  bad_start:
+bad_start:
        jnl->owner        = NULL;
        jnl->nested_count = 0;
        unlock_journal(jnl);
+
        return ret;
 }
 
@@ -1828,77 +2569,123 @@ journal_start_transaction(journal *jnl)
 int
 journal_modify_block_start(journal *jnl, struct buf *bp)
 {
-    transaction *tr;
+       transaction *tr;
     
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
+
 
-    if (jnl->flags & JOURNAL_INVALID) {
+       free_old_stuff(jnl);
+
+       if (jnl->flags & JOURNAL_INVALID) {
                return EINVAL;
-    }
+       }
 
-    // XXXdbg - for debugging I want this to be true.  later it may
-    //          not be necessary.
-    if ((buf_flags(bp) & B_META) == 0) {
-               panic("jnl: modify_block_start: bp @ 0x%x is not a meta-data block! (jnl 0x%x)\n", bp, jnl);
-    }
+       // XXXdbg - for debugging I want this to be true.  later it may
+       //          not be necessary.
+       if ((buf_flags(bp) & B_META) == 0) {
+               panic("jnl: modify_block_start: bp @ %p is not a meta-data block! (jnl %p)\n", bp, jnl);
+       }
 
-    tr = jnl->active_tr;
-    CHECK_TRANSACTION(tr);
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
 
-    if (jnl->owner != current_thread()) {
-               panic("jnl: modify_block_start: called w/out a transaction! jnl 0x%x, owner 0x%x, curact 0x%x\n",
-                         jnl, jnl->owner, current_thread());
-    }
+       if (jnl->owner != current_thread()) {
+               panic("jnl: modify_block_start: called w/out a transaction! jnl %p, owner %p, curact %p\n",
+                     jnl, jnl->owner, current_thread());
+       }
 
-    free_old_stuff(jnl);
+       //printf("jnl: mod block start (bp 0x%x vp 0x%x l/blkno %qd/%qd bsz %d; total bytes %d)\n",
+       //   bp, buf_vnode(bp), buf_lblkno(bp), buf_blkno(bp), buf_size(bp), tr->total_bytes);
 
-    //printf("jnl: mod block start (bp 0x%x vp 0x%x l/blkno %qd/%qd bsz %d; total bytes %d)\n",
-    //   bp, buf_vnode(bp), buf_lblkno(bp), buf_blkno(bp), buf_size(bp), tr->total_bytes);
+       // can't allow blocks that aren't an even multiple of the
+       // underlying block size.
+       if ((buf_size(bp) % jnl->jhdr->jhdr_size) != 0) {
+               uint32_t phys_blksz, bad=0;
+           
+               if (VNOP_IOCTL(jnl->jdev, DKIOCGETBLOCKSIZE, (caddr_t)&phys_blksz, 0, vfs_context_kernel())) {
+                       bad = 1;
+               } else if (phys_blksz != (uint32_t)jnl->jhdr->jhdr_size) {
+                       if (phys_blksz < 512) {
+                               panic("jnl: mod block start: phys blksz %d is too small (%d, %d)\n",
+                                     phys_blksz, buf_size(bp), jnl->jhdr->jhdr_size);
+                       }
 
-    // can't allow blocks that aren't an even multiple of the
-    // underlying block size.
-    if ((buf_size(bp) % jnl->jhdr->jhdr_size) != 0) {
-               panic("jnl: mod block start: bufsize %d not a multiple of block size %d\n",
-                         buf_size(bp), jnl->jhdr->jhdr_size);
-               return -1;
-    }
+                       if ((buf_size(bp) % phys_blksz) != 0) {
+                               bad = 1;
+                       } else if (phys_blksz < (uint32_t)jnl->jhdr->jhdr_size) {
+                               jnl->jhdr->jhdr_size = phys_blksz;
+                       } else {
+                               // the phys_blksz is now larger... need to realloc the jhdr
+                               char *new_header_buf;
+
+                               printf("jnl: %s: phys blksz got bigger (was: %d/%d now %d)\n",
+                                      jnl->jdev_name, jnl->header_buf_size, jnl->jhdr->jhdr_size, phys_blksz);
+                               if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&new_header_buf, phys_blksz)) {
+                                       printf("jnl: modify_block_start: %s: create: phys blksz change (was %d, now %d) but could not allocate space for new header\n",
+                                              jnl->jdev_name, jnl->jhdr->jhdr_size, phys_blksz);
+                                       bad = 1;
+                               } else {
+                                       memcpy(new_header_buf, jnl->header_buf, jnl->header_buf_size);
+                                       memset(&new_header_buf[jnl->header_buf_size], 0x18, (phys_blksz - jnl->header_buf_size));
+                                       kmem_free(kernel_map, (vm_offset_t)jnl->header_buf, jnl->header_buf_size);
+                                       jnl->header_buf = new_header_buf;
+                                       jnl->header_buf_size = phys_blksz;
+                                       
+                                       jnl->jhdr = (journal_header *)jnl->header_buf;
+                                       jnl->jhdr->jhdr_size = phys_blksz;
+                               }
+                       }
+               } else {
+                       bad = 1;
+               }
+           
+               if (bad) {
+                       panic("jnl: mod block start: bufsize %d not a multiple of block size %d\n",
+                             buf_size(bp), jnl->jhdr->jhdr_size);
+                       return -1;
+               }
+       }
 
-    // make sure that this transaction isn't bigger than the whole journal
-    if (tr->total_bytes+buf_size(bp) >= (jnl->jhdr->size - jnl->jhdr->jhdr_size)) {
-               panic("jnl: transaction too big (%d >= %lld bytes, bufsize %d, tr 0x%x bp 0x%x)\n",
-                         tr->total_bytes, (tr->jnl->jhdr->size - jnl->jhdr->jhdr_size), buf_size(bp), tr, bp);
+       // make sure that this transaction isn't bigger than the whole journal
+       if (tr->total_bytes+buf_size(bp) >= (jnl->jhdr->size - jnl->jhdr->jhdr_size)) {
+               panic("jnl: transaction too big (%d >= %lld bytes, bufsize %d, tr %p bp %p)\n",
+                     tr->total_bytes, (tr->jnl->jhdr->size - jnl->jhdr->jhdr_size), buf_size(bp), tr, bp);
                return -1;
-    }
+       }
 
-    // if the block is dirty and not already locked we have to write
-    // it out before we muck with it because it has data that belongs
-    // (presumably) to another transaction.
-    //
-    if ((buf_flags(bp) & (B_DELWRI | B_LOCKED)) == B_DELWRI) {
+       // if the block is dirty and not already locked we have to write
+       // it out before we muck with it because it has data that belongs
+       // (presumably) to another transaction.
+       //
+       if ((buf_flags(bp) & (B_DELWRI | B_LOCKED)) == B_DELWRI) {
 
                if (buf_flags(bp) & B_ASYNC) {
-                       panic("modify_block_start: bp @ 0x% has async flag set!\n", bp);
+                       panic("modify_block_start: bp @ %p has async flag set!\n", bp);
                }
+               if (bp->b_shadow_ref)
+                       panic("modify_block_start: dirty bp @ %p has shadows!\n", bp);
 
                // this will cause it to not be buf_brelse()'d
                 buf_setflags(bp, B_NORELSE);
                VNOP_BWRITE(bp);
-    }
-    buf_setflags(bp, B_LOCKED);
-       
-    return 0;
+       }
+       buf_setflags(bp, B_LOCKED);
+
+       return 0;
 }
 
 int
 journal_modify_block_abort(journal *jnl, struct buf *bp)
 {
-    transaction *tr;
+       transaction     *tr;
        block_list_header *blhdr;
-       int i, j;
+       int             i;
     
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
 
-    tr = jnl->active_tr;
+       free_old_stuff(jnl);
+
+       tr = jnl->active_tr;
        
        //
        // if there's no active transaction then we just want to
@@ -1910,29 +2697,25 @@ journal_modify_block_abort(journal *jnl, struct buf *bp)
                return 0;
        }
 
-    if (jnl->flags & JOURNAL_INVALID) {
+       if (jnl->flags & JOURNAL_INVALID) {
+       /* Still need to buf_brelse(). Callers assume we consume the bp. */
+       buf_brelse(bp);
                return EINVAL;
-    }
+       }
 
-    CHECK_TRANSACTION(tr);
+       CHECK_TRANSACTION(tr);
     
-    if (jnl->owner != current_thread()) {
-               panic("jnl: modify_block_abort: called w/out a transaction! jnl 0x%x, owner 0x%x, curact 0x%x\n",
-                         jnl, jnl->owner, current_thread());
-    }
-
-    free_old_stuff(jnl);
+       if (jnl->owner != current_thread()) {
+               panic("jnl: modify_block_abort: called w/out a transaction! jnl %p, owner %p, curact %p\n",
+                     jnl, jnl->owner, current_thread());
+       }
 
-    // printf("jnl: modify_block_abort: tr 0x%x bp 0x%x\n", jnl->active_tr, bp);
+       // printf("jnl: modify_block_abort: tr 0x%x bp 0x%x\n", jnl->active_tr, bp);
 
-    // first check if it's already part of this transaction
-    for(blhdr=tr->blhdr; blhdr; blhdr=(block_list_header *)((long)blhdr->binfo[0].bnum)) {
-               for(i=1; i < blhdr->num_blocks; i++) {
-                       if (bp == blhdr->binfo[i].bp) {
-                               if (buf_size(bp) != blhdr->binfo[i].bsize) {
-                                       panic("jnl: bp @ 0x%x changed size on me! (%d vs. %d, jnl 0x%x)\n",
-                                                 bp, buf_size(bp), blhdr->binfo[i].bsize, jnl);
-                               }
+       // first check if it's already part of this transaction
+       for (blhdr = tr->blhdr; blhdr; blhdr = (block_list_header *)((long)blhdr->binfo[0].bnum)) {
+               for (i = 1; i < blhdr->num_blocks; i++) {
+                       if (bp == blhdr->binfo[i].u.bp) {
                                break;
                        }
                }
@@ -1940,7 +2723,7 @@ journal_modify_block_abort(journal *jnl, struct buf *bp)
                if (i < blhdr->num_blocks) {
                        break;
                }
-    }
+       }
 
        //
        // if blhdr is null, then this block has only had modify_block_start
@@ -1950,75 +2733,77 @@ journal_modify_block_abort(journal *jnl, struct buf *bp)
        // on it and so we need to keep it locked in memory.
        //
        if (blhdr == NULL) { 
-                 buf_clearflags(bp, B_LOCKED);
+               buf_clearflags(bp, B_LOCKED);
        }
 
-    buf_brelse(bp);
-    return 0;
+       buf_brelse(bp);
+       return 0;
 }
 
 
 int
-journal_modify_block_end(journal *jnl, struct buf *bp)
+journal_modify_block_end(journal *jnl, struct buf *bp, void (*func)(buf_t bp, void *arg), void *arg)
 {
-    int                i, j, tbuffer_offset;
-    char              *blkptr;
-    block_list_header *blhdr, *prev=NULL;
-    transaction       *tr;
+       int             i = 1;
+       int             tbuffer_offset=0;
+       block_list_header *blhdr, *prev=NULL;
+       transaction     *tr;
 
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
 
-    if (jnl->flags & JOURNAL_INVALID) {
-               return EINVAL;
-    }
+       free_old_stuff(jnl);
 
-    tr = jnl->active_tr;
-    CHECK_TRANSACTION(tr);
+       if (jnl->flags & JOURNAL_INVALID) {
+       /* Still need to buf_brelse(). Callers assume we consume the bp. */
+       buf_brelse(bp);
+               return EINVAL;
+       }
 
-    if (jnl->owner != current_thread()) {
-               panic("jnl: modify_block_end: called w/out a transaction! jnl 0x%x, owner 0x%x, curact 0x%x\n",
-                         jnl, jnl->owner, current_thread());
-    }
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
 
-    free_old_stuff(jnl);
+       if (jnl->owner != current_thread()) {
+               panic("jnl: modify_block_end: called w/out a transaction! jnl %p, owner %p, curact %p\n",
+                     jnl, jnl->owner, current_thread());
+       }
 
-    //printf("jnl: mod block end:  (bp 0x%x vp 0x%x l/blkno %qd/%qd bsz %d, total bytes %d)\n", 
-    //   bp, buf_vnode(bp), buf_lblkno(bp), buf_blkno(bp), buf_size(bp), tr->total_bytes);
+       //printf("jnl: mod block end:  (bp 0x%x vp 0x%x l/blkno %qd/%qd bsz %d, total bytes %d)\n", 
+       //   bp, buf_vnode(bp), buf_lblkno(bp), buf_blkno(bp), buf_size(bp), tr->total_bytes);
 
-    if ((buf_flags(bp) & B_LOCKED) == 0) {
-               panic("jnl: modify_block_end: bp 0x%x not locked! jnl @ 0x%x\n", bp, jnl);
-    }
+       if ((buf_flags(bp) & B_LOCKED) == 0) {
+               panic("jnl: modify_block_end: bp %p not locked! jnl @ %p\n", bp, jnl);
+       }
         
-    // first check if it's already part of this transaction
-    for(blhdr=tr->blhdr; blhdr; prev=blhdr,blhdr=(block_list_header *)((long)blhdr->binfo[0].bnum)) {
+       // first check if it's already part of this transaction
+       for (blhdr = tr->blhdr; blhdr; prev = blhdr, blhdr = (block_list_header *)((long)blhdr->binfo[0].bnum)) {
                tbuffer_offset = jnl->jhdr->blhdr_size;
 
-               for(i=1; i < blhdr->num_blocks; i++) {
-                       if (bp == blhdr->binfo[i].bp) {
-                               if (buf_size(bp) != blhdr->binfo[i].bsize) {
-                                       panic("jnl: bp @ 0x%x changed size on me! (%d vs. %d, jnl 0x%x)\n",
-                                                 bp, buf_size(bp), blhdr->binfo[i].bsize, jnl);
-                               }
+               for (i = 1; i < blhdr->num_blocks; i++) {
+                       if (bp == blhdr->binfo[i].u.bp) {
                                break;
                        }
-                       tbuffer_offset += blhdr->binfo[i].bsize;
+                       if (blhdr->binfo[i].bnum != (off_t)-1) {
+                               tbuffer_offset += buf_size(blhdr->binfo[i].u.bp);
+                       } else {
+                               tbuffer_offset += blhdr->binfo[i].u.bi.bsize;
+                       }
                }
 
                if (i < blhdr->num_blocks) {
                        break;
                }
-    }
+       }
 
-    if (blhdr == NULL
-               && prev
-               && (prev->num_blocks+1) <= prev->max_blocks
-               && (prev->bytes_used+buf_size(bp)) <= tr->tbuffer_size) {
+       if (blhdr == NULL
+           && prev
+           && (prev->num_blocks+1) <= prev->max_blocks
+           && (prev->bytes_used+buf_size(bp)) <= (uint32_t)tr->tbuffer_size) {
                blhdr = prev;
-    } else if (blhdr == NULL) {
-               block_list_header *nblhdr;
 
+       } else if (blhdr == NULL) {
+               block_list_header *nblhdr;
                if (prev == NULL) {
-                       panic("jnl: modify block end: no way man, prev == NULL?!?, jnl 0x%x, bp 0x%x\n", jnl, bp);
+                       panic("jnl: modify block end: no way man, prev == NULL?!?, jnl %p, bp %p\n", jnl, bp);
                }
 
                // we got to the end of the list, didn't find the block and there's
@@ -2028,18 +2813,21 @@ journal_modify_block_end(journal *jnl, struct buf *bp)
                // through prev->binfo[0].bnum.  that's a skanky way to do things but
                // avoids having yet another linked list of small data structures to manage.
 
-               if (kmem_alloc(kernel_map, (vm_offset_t *)&nblhdr, tr->tbuffer_size)) {
-                       panic("jnl: end_tr: no space for new block tr @ 0x%x (total bytes: %d)!\n",
-                                 tr, tr->total_bytes);
+               if (kmem_alloc_kobject(kernel_map, (vm_offset_t *)&nblhdr, tr->tbuffer_size)) {
+                       panic("jnl: end_tr: no space for new block tr @ %p (total bytes: %d)!\n",
+                             tr, tr->total_bytes);
                }
 
                // journal replay code checksum check depends on this.
                memset(nblhdr, 0, BLHDR_CHECKSUM_SIZE);
+               // Fill up the rest of the block with unimportant bytes
+               memset(nblhdr + BLHDR_CHECKSUM_SIZE, 0x5a, jnl->jhdr->blhdr_size - BLHDR_CHECKSUM_SIZE);
 
                // initialize the new guy
                nblhdr->max_blocks = (jnl->jhdr->blhdr_size / sizeof(block_info)) - 1;
                nblhdr->num_blocks = 1;      // accounts for this header block
                nblhdr->bytes_used = jnl->jhdr->blhdr_size;
+               nblhdr->flags = BLHDR_CHECK_CHECKSUMS;
            
                tr->num_blhdrs++;
                tr->total_bytes += jnl->jhdr->blhdr_size;
@@ -2051,19 +2839,15 @@ journal_modify_block_end(journal *jnl, struct buf *bp)
                blhdr          = nblhdr;
                tbuffer_offset = jnl->jhdr->blhdr_size;
                i              = 1;
-    }
+       }
 
 
-    if ((i+1) > blhdr->max_blocks) {
+       if ((i+1) > blhdr->max_blocks) {
                panic("jnl: modify_block_end: i = %d, max_blocks %d\n", i, blhdr->max_blocks);
-    }
-
-    // copy the data into the in-memory transaction buffer
-    blkptr = (char *)&((char *)blhdr)[tbuffer_offset];
-    memcpy(blkptr, buf_dataptr(bp), buf_size(bp));
+       }
 
-    // if this is true then this is a new block we haven't seen
-    if (i >= blhdr->num_blocks) {
+       // if this is true then this is a new block we haven't seen
+       if (i >= blhdr->num_blocks) {
                 int    bsize;
                vnode_t vp;
 
@@ -2071,57 +2855,67 @@ journal_modify_block_end(journal *jnl, struct buf *bp)
                vnode_ref(vp);
                bsize = buf_size(bp);
 
-               blhdr->binfo[i].bnum  = (off_t)(buf_blkno(bp));
-               blhdr->binfo[i].bsize = bsize;
-               blhdr->binfo[i].bp    = bp;
+               blhdr->binfo[i].bnum = (off_t)(buf_blkno(bp));
+               blhdr->binfo[i].u.bp = bp;
+
+               KERNEL_DEBUG_CONSTANT(0x3018004, vp, blhdr->binfo[i].bnum, bsize, 0, 0);
 
+               if (func) {
+                       void (*old_func)(buf_t, void *)=NULL, *old_arg=NULL;
+                       
+                       buf_setfilter(bp, func, arg, &old_func, &old_arg);
+                       if (old_func != NULL && old_func != func) {
+                           panic("jnl: modify_block_end: old func %p / arg %p (func %p)", old_func, old_arg, func);
+                       }
+               }
+               
                blhdr->bytes_used += bsize;
                tr->total_bytes   += bsize;
 
                blhdr->num_blocks++;
-    }
-    buf_bdwrite(bp);
+       }
+       buf_bdwrite(bp);
 
-    return 0;
+       return 0;
 }
 
 int
 journal_kill_block(journal *jnl, struct buf *bp)
 {
-    int                i;
-    int                       bflags;
-    block_list_header *blhdr;
-    transaction       *tr;
+       int             i;
+       int             bflags;
+       block_list_header *blhdr;
+       transaction     *tr;
 
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
 
-    if (jnl->flags & JOURNAL_INVALID) {
-               return EINVAL;
-    }
+       free_old_stuff(jnl);
 
-    tr = jnl->active_tr;
-    CHECK_TRANSACTION(tr);
+       if (jnl->flags & JOURNAL_INVALID) {
+               return EINVAL;
+       }
 
-    if (jnl->owner != current_thread()) {
-               panic("jnl: modify_block_end: called w/out a transaction! jnl 0x%x, owner 0x%x, curact 0x%x\n",
-                         jnl, jnl->owner, current_thread());
-    }
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
 
-    free_old_stuff(jnl);
+       if (jnl->owner != current_thread()) {
+               panic("jnl: modify_block_end: called w/out a transaction! jnl %p, owner %p, curact %p\n",
+                     jnl, jnl->owner, current_thread());
+       }
 
-    bflags = buf_flags(bp);
+       bflags = buf_flags(bp);
 
-    if ( !(bflags & B_LOCKED))
-            panic("jnl: modify_block_end: called with bp not B_LOCKED");
+       if ( !(bflags & B_LOCKED))
+               panic("jnl: modify_block_end: called with bp not B_LOCKED");
 
-    /*
-     * bp must be BL_BUSY and B_LOCKED
-     */
-    // first check if it's already part of this transaction
-    for(blhdr=tr->blhdr; blhdr; blhdr=(block_list_header *)((long)blhdr->binfo[0].bnum)) {
+       /*
+        * bp must be BL_BUSY and B_LOCKED
+        * first check if it's already part of this transaction
+        */
+       for (blhdr = tr->blhdr; blhdr; blhdr = (block_list_header *)((long)blhdr->binfo[0].bnum)) {
 
-               for(i=1; i < blhdr->num_blocks; i++) {
-                       if (bp == blhdr->binfo[i].bp) {
+               for (i = 1; i < blhdr->num_blocks; i++) {
+                       if (bp == blhdr->binfo[i].u.bp) {
                                vnode_t vp;
 
                                buf_clearflags(bp, B_LOCKED);
@@ -2140,9 +2934,11 @@ journal_kill_block(journal *jnl, struct buf *bp)
                                //} else {
                                        tr->num_killed += buf_size(bp);
                                //}
-                               blhdr->binfo[i].bp   = NULL;
                                blhdr->binfo[i].bnum = (off_t)-1;
+                               blhdr->binfo[i].u.bp = NULL;
+                               blhdr->binfo[i].u.bi.bsize = buf_size(bp);
 
+                               buf_markinvalid(bp);
                                buf_brelse(bp);
 
                                break;
@@ -2152,474 +2948,1906 @@ journal_kill_block(journal *jnl, struct buf *bp)
                if (i < blhdr->num_blocks) {
                        break;
                }
-    }
+       }
 
-    return 0;
+       return 0;
+}
+
+/*
+;________________________________________________________________________________
+;
+; Routine:             journal_trim_set_callback
+;
+; Function:            Provide the journal with a routine to be called back when a
+;                              TRIM has (or would have) been issued to the device.  That
+;                              is, the transaction has been flushed to the device, and the
+;                              blocks freed by the transaction are now safe for reuse.
+;
+;                              CAUTION: If the journal becomes invalid (eg., due to an I/O
+;                              error when trying to write to the journal), this callback
+;                              will stop getting called, even if extents got freed before
+;                              the journal became invalid!
+;
+; Input Arguments:
+;      jnl                     - The journal structure for the filesystem.
+;      callback        - The function to call when the TRIM is complete.
+;      arg                     - An argument to be passed to callback.
+;________________________________________________________________________________
+*/
+__private_extern__ void
+journal_trim_set_callback(journal *jnl, jnl_trim_callback_t callback, void *arg)
+{
+       jnl->trim_callback = callback;
+       jnl->trim_callback_arg = arg;
 }
 
 
+/*
+;________________________________________________________________________________
+;
+; Routine:             journal_trim_realloc
+;
+; Function:            Increase the amount of memory allocated for the list of extents
+;                              to be unmapped (trimmed).  This routine will be called when
+;                              adding an extent to the list, and the list already occupies
+;                              all of the space allocated to it.  This routine returns ENOMEM
+;                              if unable to allocate more space, or 0 if the extent list was
+;                              grown successfully.
+;
+; Input Arguments:
+;      trim            - The trim list to be resized.
+;
+; Output:
+;      (result)        - ENOMEM or 0.
+;
+; Side effects:
+;       The allocated_count and extents fields of tr->trim are updated
+;       if the function returned 0.
+;________________________________________________________________________________
+*/
 static int
-journal_binfo_cmp(void *a, void *b)
+trim_realloc(struct jnl_trim_list *trim)
 {
-    block_info *bi_a = (struct block_info *)a;
-    block_info *bi_b = (struct block_info *)b;
-    daddr64_t res;
+       void *new_extents;
+       uint32_t new_allocated_count;
+       
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REALLOC | DBG_FUNC_START, trim, 0, trim->allocated_count, trim->extent_count, 0);
+       
+       new_allocated_count = trim->allocated_count + JOURNAL_DEFAULT_TRIM_EXTENTS;
+       new_extents = kalloc(new_allocated_count * sizeof(dk_extent_t));
+       if (new_extents == NULL) {
+               printf("jnl: trim_realloc: unable to grow extent list!\n");
+               /*
+                * Since we could be called when allocating space previously marked
+                * to be trimmed, we need to empty out the list to be safe.
+                */
+               trim->extent_count = 0;
+               if (jnl_kdebug)
+                       KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REALLOC | DBG_FUNC_END, ENOMEM, 0, trim->allocated_count, 0, 0);
+               return ENOMEM;
+       }
+       
+       /* Copy the old extent list to the newly allocated list. */
+       if (trim->extents != NULL) {
+               memmove(new_extents,
+                               trim->extents,
+                               trim->allocated_count * sizeof(dk_extent_t));
+               kfree(trim->extents,
+                         trim->allocated_count * sizeof(dk_extent_t));
+       }
+       
+       trim->allocated_count = new_allocated_count;
+       trim->extents = new_extents;
 
-    if (bi_a->bp == NULL) {
-               return 1;
-    }
-    if (bi_b->bp == NULL) {
-               return -1;
-    }
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REALLOC | DBG_FUNC_END, 0, 0, new_allocated_count, trim->extent_count, 0);
+       
+       return 0;
+}
 
-    // don't have to worry about negative block
-    // numbers so this is ok to do.
-    //
-    res = (buf_blkno(bi_a->bp) - buf_blkno(bi_b->bp));
+/*
+ ;________________________________________________________________________________
+ ;
+ ; Routine:            trim_search_extent
+ ;
+ ; Function:           Search the given extent list to see if any of its extents
+ ;                             overlap the given extent.
+ ;
+ ; Input Arguments:
+ ;     trim            - The trim list to be searched.
+ ;     offset          - The first byte of the range to be searched for.
+ ;     length          - The number of bytes of the extent being searched for.
+ ;  overlap_start - start of the overlapping extent
+ ;  overlap_len   - length of the overlapping extent
+ ;
+ ; Output:
+ ;     (result)        - TRUE if one or more extents overlap, FALSE otherwise.
+ ;________________________________________________________________________________
+ */
+static int
+trim_search_extent(struct jnl_trim_list *trim, uint64_t offset,
+               uint64_t length, uint64_t *overlap_start, uint64_t *overlap_len)
+{
+       uint64_t end = offset + length;
+       uint32_t lower = 0;                                             /* Lowest index to search */
+       uint32_t upper = trim->extent_count;    /* Highest index to search + 1 */
+       uint32_t middle;
+
+       /* A binary search over the extent list. */
+       while (lower < upper) {
+               middle = (lower + upper) / 2;
+
+               if (trim->extents[middle].offset >= end)
+                       upper = middle;
+               else if (trim->extents[middle].offset + trim->extents[middle].length <= offset)
+                       lower = middle + 1;
+               else {
+                       if (overlap_start) {
+                               *overlap_start = trim->extents[middle].offset;
+                       }
+                       if (overlap_len) {
+                               *overlap_len = trim->extents[middle].length;
+                       }
+                       return TRUE;
+               }
+       }
 
-    return (int)res;
+       return FALSE;
 }
 
 
-static int
-end_transaction(transaction *tr, int force_it)
+/*
+;________________________________________________________________________________
+;
+; Routine:             journal_trim_add_extent
+;
+; Function:            Keep track of extents that have been freed as part of this
+;                              transaction.  If the underlying device supports TRIM (UNMAP),
+;                              then those extents will be trimmed/unmapped once the
+;                              transaction has been written to the journal.  (For example,
+;                              SSDs can support trim/unmap and avoid having to recopy those
+;                              blocks when doing wear leveling, and may reuse the same
+;                              phsyical blocks for different logical blocks.)
+;
+;                              HFS also uses this, in combination with journal_trim_set_callback,
+;                              to add recently freed extents to its free extent cache, but
+;                              only after the transaction that freed them is committed to
+;                              disk.  (This reduces the chance of overwriting live data in
+;                              a way that causes data loss if a transaction never gets
+;                              written to the journal.)
+;
+; Input Arguments:
+;      jnl                     - The journal for the volume containing the byte range.
+;      offset          - The first byte of the range to be trimmed.
+;      length          - The number of bytes of the extent being trimmed.
+;________________________________________________________________________________
+*/
+__private_extern__ int
+journal_trim_add_extent(journal *jnl, uint64_t offset, uint64_t length)
 {
-    int                 i, j, ret, amt;
-    errno_t            errno;
-    off_t               end;
-    journal            *jnl = tr->jnl;
-    struct buf         *bp;
-    block_list_header  *blhdr=NULL, *next=NULL;
+       uint64_t end;
+       transaction *tr;
+       dk_extent_t *extent;
+       uint32_t insert_index;
+       uint32_t replace_count;
+               
+       CHECK_JOURNAL(jnl);
 
-       if (jnl->cur_tr) {
-               panic("jnl: jnl @ 0x%x already has cur_tr 0x%x, new tr: 0x%x\n",
-                         jnl, jnl->cur_tr, tr);
+       /* TODO: Is it OK to manipulate the trim list even if JOURNAL_INVALID is set?  I think so... */
+       if (jnl->flags & JOURNAL_INVALID) {
+               return EINVAL;
        }
 
-    // if there weren't any modified blocks in the transaction
-    // just save off the transaction pointer and return.
-    if (tr->total_bytes == jnl->jhdr->blhdr_size) {
-               jnl->cur_tr = tr;
-               return 0;
-    }
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
 
-    // if our transaction buffer isn't very full, just hang
-    // on to it and don't actually flush anything.  this is
-    // what is known as "group commit".  we will flush the
-    // transaction buffer if it's full or if we have more than
-    // one of them so we don't start hogging too much memory.
-    //
-    if (   force_it == 0
-                  && (jnl->flags & JOURNAL_NO_GROUP_COMMIT) == 0 
-                  && tr->num_blhdrs < 3
-                  && (tr->total_bytes <= ((tr->tbuffer_size*tr->num_blhdrs) - tr->tbuffer_size/8))) {
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_ADD | DBG_FUNC_START, jnl, offset, length, tr->trim.extent_count, 0);
 
-               jnl->cur_tr = tr;
+       if (jnl->owner != current_thread()) {
+               panic("jnl: trim_add_extent: called w/out a transaction! jnl %p, owner %p, curact %p\n",
+                         jnl, jnl->owner, current_thread());
+       }
+
+       free_old_stuff(jnl);
+               
+       end = offset + length;
+               
+       /*
+        * Find the range of existing extents that can be combined with the
+        * input extent.  We start by counting the number of extents that end
+        * strictly before the input extent, then count the number of extents
+        * that overlap or are contiguous with the input extent.
+        */
+       extent = tr->trim.extents;
+       insert_index = 0;
+       while (insert_index < tr->trim.extent_count && extent->offset + extent->length < offset) {
+               ++insert_index;
+               ++extent;
+       }
+       replace_count = 0;
+       while (insert_index + replace_count < tr->trim.extent_count && extent->offset <= end) {
+               ++replace_count;
+               ++extent;
+       }
+               
+       /*
+        * If none of the existing extents can be combined with the input extent,
+        * then just insert it in the list (before item number insert_index).
+        */
+       if (replace_count == 0) {
+               /* If the list was already full, we need to grow it. */
+               if (tr->trim.extent_count == tr->trim.allocated_count) {
+                       if (trim_realloc(&tr->trim) != 0) {
+                               printf("jnl: trim_add_extent: out of memory!");
+                               if (jnl_kdebug)
+                                       KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_ADD | DBG_FUNC_END, ENOMEM, 0, 0, tr->trim.extent_count, 0);
+                               return ENOMEM;
+                       }
+               }
+               
+               /* Shift any existing extents with larger offsets. */
+               if (insert_index < tr->trim.extent_count) {
+                       memmove(&tr->trim.extents[insert_index+1],
+                                       &tr->trim.extents[insert_index],
+                                       (tr->trim.extent_count - insert_index) * sizeof(dk_extent_t));
+               }
+               tr->trim.extent_count++;
+               
+               /* Store the new extent in the list. */
+               tr->trim.extents[insert_index].offset = offset;
+               tr->trim.extents[insert_index].length = length;
+               
+               /* We're done. */
+               if (jnl_kdebug)
+                       KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_ADD | DBG_FUNC_END, 0, 0, 0, tr->trim.extent_count, 0);
                return 0;
-    }
+       }
+       
+       /*
+        * Update extent number insert_index to be the union of the input extent
+        * and all of the replaced extents.
+        */
+       if (tr->trim.extents[insert_index].offset < offset)
+               offset = tr->trim.extents[insert_index].offset;
+       extent = &tr->trim.extents[insert_index + replace_count - 1];
+       if (extent->offset + extent->length > end)
+               end = extent->offset + extent->length;
+       tr->trim.extents[insert_index].offset = offset;
+       tr->trim.extents[insert_index].length = end - offset;
+       
+       /*
+        * If we were replacing more than one existing extent, then shift any
+        * extents with larger offsets, and update the count of extents.
+        *
+        * We're going to leave extent #insert_index alone since it was just updated, above.
+        * We need to move extents from index (insert_index + replace_count) through the end of
+        * the list by (replace_count - 1) positions so that they overwrite extent #(insert_index + 1).
+        */
+       if (replace_count > 1 && (insert_index + replace_count) < tr->trim.extent_count) {
+               memmove(&tr->trim.extents[insert_index + 1],
+                               &tr->trim.extents[insert_index + replace_count],
+                               (tr->trim.extent_count - insert_index - replace_count) * sizeof(dk_extent_t));
+       }
+       tr->trim.extent_count -= replace_count - 1;
+
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_ADD | DBG_FUNC_END, 0, 0, 0, tr->trim.extent_count, 0);
+    return 0;
+}
+
+/*
+ * journal_trim_extent_overlap
+ *
+ * Return 1 if there are any pending TRIMs that overlap with the given offset and length
+ * Return 0 otherwise.
+ */
 
+int journal_trim_extent_overlap (journal *jnl, uint64_t offset, uint64_t length, uint64_t *end) {
+       transaction *tr = NULL;
+       int overlap = 0;
+
+       uint64_t overlap_start;
+       uint64_t overlap_len;
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
+
+       /*
+        * There are two lists that need to be examined for potential overlaps:
+        *
+        * The first is the current transaction. Since this function requires that
+        * a transaction be active when this is called, this is the "active_tr"
+        * pointer in the journal struct.  This has a trimlist pointer which needs
+        * to be searched.
+        */
+       overlap = trim_search_extent (&tr->trim, offset, length, &overlap_start, &overlap_len);
+       if (overlap == 0) {
+               /*
+                * The second is the async trim list, which is only done if the current
+                * transaction group (active transaction) did not overlap with our target
+                * extent. This async trim list is the set of all previously
+                * committed transaction groups whose I/Os are now in-flight. We need to hold the
+                * trim lock in order to search this list.  If we grab the list before the
+                * TRIM has completed, then we will compare it. If it is grabbed AFTER the
+                * TRIM has completed, then the pointer will be zeroed out and we won't have
+                * to check anything.
+                */
+               lck_rw_lock_shared (&jnl->trim_lock);
+               if (jnl->async_trim != NULL) {
+                       overlap = trim_search_extent(jnl->async_trim, offset, length, &overlap_start, &overlap_len);
+               }
+               lck_rw_unlock_shared (&jnl->trim_lock);
+       }
 
-    // if we're here we're going to flush the transaction buffer to disk.
-    // make sure there is room in the journal first.
-    check_free_space(jnl, tr->total_bytes);
+       if (overlap) {
+               /* compute the end (min) of the overlapping range */
+               if ( (overlap_start + overlap_len) < (offset + length)) {
+                       *end = (overlap_start + overlap_len);
+               }
+               else {
+                       *end = (offset + length);
+               }
+       }
 
-    // range check the end index
-    if (jnl->jhdr->end <= 0 || jnl->jhdr->end > jnl->jhdr->size) {
-               panic("jnl: end_transaction: end is bogus 0x%llx (sz 0x%llx)\n",
-                         jnl->jhdr->end, jnl->jhdr->size);
-    }
 
-    // this transaction starts where the current journal ends
-    tr->journal_start = jnl->jhdr->end;
-    end               = jnl->jhdr->end;
+       return overlap;
+}
 
-       //
-       // if the first entry in old_start[] isn't free yet, loop calling the
-       // file system flush routine until it is (or we panic).
-       //
-       i = 0;
-       lock_oldstart(jnl);
-       while ((jnl->old_start[0] & 0x8000000000000000LL) != 0) {
-               if (jnl->flush) {
-                       unlock_oldstart(jnl);
+/*
+ * journal_request_immediate_flush
+ *
+ * FS requests that the journal flush immediately upon the
+ * active transaction's completion.
+ *
+ * Returns 0 if operation succeeds
+ * Returns EPERM if we failed to leave hint
+ */
+int
+journal_request_immediate_flush (journal *jnl) {
+
+       transaction *tr = NULL;
+       /*
+        * Is a transaction still in process? You must do
+        * this while there are txns open
+        */
+       tr = jnl->active_tr;
+       if (tr != NULL) {
+               CHECK_TRANSACTION(tr);
+               tr->flush_on_completion = TRUE;
+       }
+       else {
+               return EPERM;
+       }
+       return 0;
+}
 
-                       if (jnl->flush) {
-                               jnl->flush(jnl->flush_arg);
-                       }
 
-                       // yield the cpu so others can get in to clear the lock bit
-                       (void)tsleep((void *)jnl, PRIBIO, "jnl-old-start-sleep", 1);
 
-                       lock_oldstart(jnl);
+/*
+;________________________________________________________________________________
+;
+; Routine:             trim_remove_extent
+;
+; Function:            Indicate that a range of bytes, some of which may have previously
+;                              been passed to journal_trim_add_extent, is now allocated.
+;                              Any overlapping ranges currently in the journal's trim list will
+;                              be removed.  If the underlying device supports TRIM (UNMAP), then
+;                              these extents will not be trimmed/unmapped when the transaction
+;                              is written to the journal.
+;
+;                              HFS also uses this to prevent newly allocated space from being
+;                              added to its free extent cache (if some portion of the newly
+;                              allocated space was recently freed).
+;
+; Input Arguments:
+;      trim            - The trim list to update.
+;      offset          - The first byte of the range to be trimmed.
+;      length          - The number of bytes of the extent being trimmed.
+;________________________________________________________________________________
+*/
+static int
+trim_remove_extent(struct jnl_trim_list *trim, uint64_t offset, uint64_t length)
+{
+       u_int64_t end;
+       dk_extent_t *extent;
+       u_int32_t keep_before;
+       u_int32_t keep_after;
+       
+       end = offset + length;
+       
+       /*
+        * Find any existing extents that start before or end after the input
+        * extent.  These extents will be modified if they overlap the input
+        * extent.  Other extents between them will be deleted.
+        */
+       extent = trim->extents;
+       keep_before = 0;
+       while (keep_before < trim->extent_count && extent->offset < offset) {
+               ++keep_before;
+               ++extent;
+       }
+       keep_after = keep_before;
+       if (keep_after > 0) {
+               /* See if previous extent extends beyond both ends of input extent. */
+               --keep_after;
+               --extent;
+       }
+       while (keep_after < trim->extent_count && (extent->offset + extent->length) <= end) {
+               ++keep_after;
+               ++extent;
+       }
+       
+       /*
+        * When we get here, the first keep_before extents (0 .. keep_before-1)
+        * start before the input extent, and extents (keep_after .. extent_count-1)
+        * end after the input extent.  We'll need to keep, all of those extents,
+        * but possibly modify #(keep_before-1) and #keep_after to remove the portion
+        * that overlaps with the input extent.
+        */
+       
+       /*
+        * Does the input extent start after and end before the same existing
+        * extent?  If so, we have to "punch a hole" in that extent and convert
+        * it to two separate extents.
+        */
+       if (keep_before >  keep_after) {
+               /* If the list was already full, we need to grow it. */
+               if (trim->extent_count == trim->allocated_count) {
+                       if (trim_realloc(trim) != 0) {
+                               printf("jnl: trim_remove_extent: out of memory!");
+                               return ENOMEM;
+                       }
+               }
+               
+               /*
+                * Make room for a new extent by shifting extents #keep_after and later
+                * down by one extent.  When we're done, extents #keep_before and
+                * #keep_after will be identical, and we can fall through to removing
+                * the portion that overlaps the input extent.
+                */
+               memmove(&trim->extents[keep_before],
+                               &trim->extents[keep_after],
+                               (trim->extent_count - keep_after) * sizeof(dk_extent_t));
+               ++trim->extent_count;
+               ++keep_after;
+               
+               /*
+                * Fall through.  We now have the case where the length of extent
+                * #(keep_before - 1) needs to be updated, and the start of extent
+                * #(keep_after) needs to be updated.
+                */
+       }
+       
+       /*
+        * May need to truncate the end of extent #(keep_before - 1) if it overlaps
+        * the input extent.
+        */
+       if (keep_before > 0) {
+               extent = &trim->extents[keep_before - 1];
+               if (extent->offset + extent->length > offset) {
+                       extent->length = offset - extent->offset;
                }
-               if (i++ >= 500) {
-                       panic("jnl: transaction that started at 0x%llx is not completing! jnl 0x%x\n",
-                                 jnl->old_start[0] & (~0x8000000000000000LL), jnl);
+       }
+       
+       /*
+        * May need to update the start of extent #(keep_after) if it overlaps the
+        * input extent.
+        */
+       if (keep_after < trim->extent_count) {
+               extent = &trim->extents[keep_after];
+               if (extent->offset < end) {
+                       extent->length = extent->offset + extent->length - end;
+                       extent->offset = end;
                }
        }
+       
+       /*
+        * If there were whole extents that overlapped the input extent, get rid
+        * of them by shifting any following extents, and updating the count.
+        */
+       if (keep_after > keep_before && keep_after < trim->extent_count) {
+               memmove(&trim->extents[keep_before],
+                               &trim->extents[keep_after],
+                               (trim->extent_count - keep_after) * sizeof(dk_extent_t));
+       }
+       trim->extent_count -= keep_after - keep_before;
 
-       //
-       // slide everyone else down and put our latest guy in the last
-       // entry in the old_start array
-       //
-       memcpy(&jnl->old_start[0], &jnl->old_start[1], sizeof(jnl->old_start)-sizeof(jnl->old_start[0]));
-       jnl->old_start[sizeof(jnl->old_start)/sizeof(jnl->old_start[0]) - 1] = tr->journal_start | 0x8000000000000000LL;
+       return 0;
+}
 
-       unlock_oldstart(jnl);
+/*
+ ;________________________________________________________________________________
+ ;
+ ; Routine:            journal_trim_remove_extent
+ ;
+ ; Function:           Make note of a range of bytes, some of which may have previously
+ ;                             been passed to journal_trim_add_extent, is now in use on the
+ ;                             volume.  The given bytes will be not be trimmed as part of
+ ;                             this transaction, or a pending trim of a transaction being
+ ;                             asynchronously flushed.
+ ;
+ ; Input Arguments:
+ ;     jnl                     - The journal for the volume containing the byte range.
+ ;     offset          - The first byte of the range to be trimmed.
+ ;     length          - The number of bytes of the extent being trimmed.
+ ;________________________________________________________________________________
+ */
+__private_extern__ int
+journal_trim_remove_extent(journal *jnl, uint64_t offset, uint64_t length)
+{
+       int error = 0;
+       transaction *tr;
+       
+       CHECK_JOURNAL(jnl);
 
+       /* TODO: Is it OK to manipulate the trim list even if JOURNAL_INVALID is set?  I think so... */
+       if (jnl->flags & JOURNAL_INVALID) {
+               return EINVAL;
+       }
 
-    // for each block, make sure that the physical block # is set
-    for(blhdr=tr->blhdr; blhdr; blhdr=next) {
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
 
-               for(i=1; i < blhdr->num_blocks; i++) {
-                       daddr64_t blkno;
-                       daddr64_t lblkno;
-                       struct vnode *vp;
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REMOVE | DBG_FUNC_START, jnl, offset, length, tr->trim.extent_count, 0);
 
-                       bp = blhdr->binfo[i].bp;
-                       if (bp == NULL) {   // only true if a block was "killed" 
-                               if (blhdr->binfo[i].bnum != (off_t)-1) {
-                                       panic("jnl: inconsistent binfo (NULL bp w/bnum %lld; jnl @ 0x%x, tr 0x%x)\n",
-                                                 blhdr->binfo[i].bnum, jnl, tr);
-                               }
-                               continue;
-                       }
-                       vp = buf_vnode(bp);
-                       blkno = buf_blkno(bp);
-                       lblkno = buf_lblkno(bp);
-
-                       if (vp == NULL && lblkno == blkno) {
-                           printf("jnl: end_tr: bad news! bp @ 0x%x w/null vp and l/blkno = %qd/%qd.  aborting the transaction (tr 0x%x jnl 0x%x).\n",
-                                         bp, lblkno, blkno, tr, jnl);
-                           goto bad_journal;
-                       }
-           
-                       // if the lblkno is the same as blkno and this bp isn't
-                       // associated with the underlying file system device then
-                       // we need to call bmap() to get the actual physical block.
-                       //
-                       if ((lblkno == blkno) && (vp != jnl->fsdev)) {
-                               off_t   f_offset;
-                               size_t  contig_bytes;
+       if (jnl->owner != current_thread()) {
+               panic("jnl: trim_remove_extent: called w/out a transaction! jnl %p, owner %p, curact %p\n",
+                         jnl, jnl->owner, current_thread());
+       }
 
-                               if (VNOP_BLKTOOFF(vp, lblkno, &f_offset)) {
-                                       printf("jnl: end_tr: vnop_blktooff failed @ 0x%x, jnl 0x%x\n", bp, jnl);
-                                       goto bad_journal;
-                               }
-                               if (VNOP_BLOCKMAP(vp, f_offset, buf_count(bp), &blkno, &contig_bytes, NULL, 0, NULL)) {
-                                       printf("jnl: end_tr: can't blockmap the bp @ 0x%x, jnl 0x%x\n", bp, jnl);
-                                       goto bad_journal;
-                               }
-                               if ((uint32_t)contig_bytes < buf_count(bp)) {
-                                       printf("jnl: end_tr: blk not physically contiguous on disk@ 0x%x, jnl 0x%x\n", bp, jnl);
-                                       goto bad_journal;
-                               }
-                               buf_setblkno(bp, blkno);
+       free_old_stuff(jnl);
+               
+       error = trim_remove_extent(&tr->trim, offset, length);
+       if (error == 0) {
+               int found = FALSE;
+               
+               /*
+                * See if a pending trim has any extents that overlap with the
+                * one we were given.
+                */
+               lck_rw_lock_shared(&jnl->trim_lock);
+               if (jnl->async_trim != NULL)
+                       found = trim_search_extent(jnl->async_trim, offset, length, NULL, NULL);
+               lck_rw_unlock_shared(&jnl->trim_lock);
+               
+               if (found) {
+                       /*
+                        * There was an overlap, so avoid trimming the extent we
+                        * just allocated.  (Otherwise, it might get trimmed after
+                        * we've written to it, which will cause that data to be
+                        * corrupted.)
+                        */
+                       uint32_t async_extent_count = 0;
+                       
+                       if (jnl_kdebug)
+                               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REMOVE_PENDING | DBG_FUNC_START, jnl, offset, length, 0, 0);
+                       lck_rw_lock_exclusive(&jnl->trim_lock);
+                       if (jnl->async_trim != NULL) {
+                               error = trim_remove_extent(jnl->async_trim, offset, length);
+                               async_extent_count = jnl->async_trim->extent_count;
                        }
-                       // update this so we write out the correct physical block number!
-                       blhdr->binfo[i].bnum = (off_t)(blkno);
+                       lck_rw_unlock_exclusive(&jnl->trim_lock);
+                       if (jnl_kdebug)
+                               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REMOVE_PENDING | DBG_FUNC_END, error, 0, 0, async_extent_count, 0);
                }
+       }
 
-               next = (block_list_header *)((long)blhdr->binfo[0].bnum);
-    }
-    
-    for(blhdr=tr->blhdr; blhdr; blhdr=(block_list_header *)((long)blhdr->binfo[0].bnum)) {
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_REMOVE | DBG_FUNC_END, error, 0, 0, tr->trim.extent_count, 0);
+       return error;
+}
 
-               amt = blhdr->bytes_used;
 
-               blhdr->checksum = 0;
-               blhdr->checksum = calc_checksum((char *)blhdr, BLHDR_CHECKSUM_SIZE);
+static int
+journal_trim_flush(journal *jnl, transaction *tr)
+{
+       int errno = 0;
        
-               ret = write_journal_data(jnl, &end, blhdr, amt);
-               if (ret != amt) {
-                       printf("jnl: end_transaction: only wrote %d of %d bytes to the journal!\n",
-                                  ret, amt);
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_FLUSH | DBG_FUNC_START, jnl, tr, 0, tr->trim.extent_count, 0);
 
-                       goto bad_journal;
+       lck_rw_lock_shared(&jnl->trim_lock);
+       if (tr->trim.extent_count > 0) {
+               dk_unmap_t unmap;
+                               
+               bzero(&unmap, sizeof(unmap));
+               if (CONFIG_HFS_TRIM && (jnl->flags & JOURNAL_USE_UNMAP)) {
+                       unmap.extents = tr->trim.extents;
+                       unmap.extentsCount = tr->trim.extent_count;
+                       if (jnl_kdebug)
+                               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_UNMAP | DBG_FUNC_START, jnl, tr, 0, tr->trim.extent_count, 0);
+                       errno = VNOP_IOCTL(jnl->fsdev, DKIOCUNMAP, (caddr_t)&unmap, FWRITE, vfs_context_kernel());
+                       if (jnl_kdebug)
+                               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_UNMAP | DBG_FUNC_END, errno, 0, 0, 0, 0);
                }
-    }
+               
+               /*
+                * Call back into the file system to tell them that we have
+                * trimmed some extents and that they can now be reused.
+                *
+                * CAUTION: If the journal becomes invalid (eg., due to an I/O
+                * error when trying to write to the journal), this callback
+                * will stop getting called, even if extents got freed before
+                * the journal became invalid!
+                */
+               if (jnl->trim_callback)
+                       jnl->trim_callback(jnl->trim_callback_arg, tr->trim.extent_count, tr->trim.extents);
+       }
+       lck_rw_unlock_shared(&jnl->trim_lock);
+
+       /*
+        * If the transaction we're flushing was the async transaction, then
+        * tell the current transaction that there is no pending trim
+        * any more.
+        *
+        * NOTE: Since we released the lock, another thread could have
+        * removed one or more extents from our list.  That's not a
+        * problem since any writes to the re-allocated blocks
+        * would get sent to the device after the DKIOCUNMAP.
+        */
+       lck_rw_lock_exclusive(&jnl->trim_lock);
+       if (jnl->async_trim == &tr->trim)
+               jnl->async_trim = NULL;
+       lck_rw_unlock_exclusive(&jnl->trim_lock);
+
+       /*
+        * By the time we get here, no other thread can discover the address
+        * of "tr", so it is safe for us to manipulate tr->trim without
+        * holding any locks.
+        */
+       if (tr->trim.extents) {                 
+               kfree(tr->trim.extents, tr->trim.allocated_count * sizeof(dk_extent_t));
+               tr->trim.allocated_count = 0;
+               tr->trim.extent_count = 0;
+               tr->trim.extents = NULL;
+       }
+       
+       if (jnl_kdebug)
+               KERNEL_DEBUG_CONSTANT(DBG_JOURNAL_TRIM_FLUSH | DBG_FUNC_END, errno, 0, 0, 0, 0);
 
-    jnl->jhdr->end  = end;    // update where the journal now ends
-    tr->journal_end = end;    // the transaction ends here too
-    if (tr->journal_start == 0 || tr->journal_end == 0) {
-               panic("jnl: end_transaction: bad tr journal start/end: 0x%llx 0x%llx\n",
-                         tr->journal_start, tr->journal_end);
-    }
+       return errno;
+}
 
-    if (write_journal_header(jnl) != 0) {
-               goto bad_journal;
-    }
+static int
+journal_binfo_cmp(const void *a, const void *b)
+{
+       const block_info *bi_a = (const struct block_info *)a;
+       const block_info *bi_b = (const struct block_info *)b;
+       daddr64_t res;
 
-    //
-    // setup for looping through all the blhdr's.  we null out the
-    // tbuffer and blhdr fields so that they're not used any more.
-    //
-    blhdr       = tr->blhdr;
-    tr->tbuffer = NULL;
-    tr->blhdr   = NULL;
+       if (bi_a->bnum == (off_t)-1) {
+               return 1;
+       }
+       if (bi_b->bnum == (off_t)-1) {
+               return -1;
+       }
 
-    // the buffer_flushed_callback will only be called for the 
-    // real blocks that get flushed so we have to account for 
-    // the block_list_headers here.
-    //
-    tr->num_flushed = tr->num_blhdrs * jnl->jhdr->blhdr_size;
+       // don't have to worry about negative block
+       // numbers so this is ok to do.
+       //
+       res = (buf_blkno(bi_a->u.bp) - buf_blkno(bi_b->u.bp));
 
-    // for each block, set the iodone callback and unlock it
-    for(; blhdr; blhdr=next) {
+       return (int)res;
+}
 
-               // we can re-order the buf ptrs because everything is written out already
-               qsort(&blhdr->binfo[1], blhdr->num_blocks-1, sizeof(block_info), journal_binfo_cmp);
 
-               for(i=1; i < blhdr->num_blocks; i++) {
-                       if (blhdr->binfo[i].bp == NULL) {
-                               continue;
-                       }
+/*
+ * End a transaction.  If the transaction is small enough, and we're not forcing
+ * a write to disk, the "active" transaction becomes the "current" transaction,
+ * and will be reused for the next transaction that is started (group commit).
+ *
+ * If the transaction gets written to disk (because force_it is true, or no
+ * group commit, or the transaction is sufficiently full), the blocks get
+ * written into the journal first, then the are written asynchronously.  When
+ * those async writes complete, the transaction can be freed and removed from
+ * the journal.
+ *
+ * An optional callback can be supplied.  If given, it is called after the
+ * the blocks have been written to the journal, but before the async writes
+ * of those blocks to their normal on-disk locations.  This is used by
+ * journal_relocate so that the location of the journal can be changed and
+ * flushed to disk before the blocks get written to their normal locations.
+ * Note that the callback is only called if the transaction gets written to
+ * the journal during this end_transaction call; you probably want to set the
+ * force_it flag.
+ *
+ * Inputs:
+ *     tr                       Transaction to add to the journal
+ *     force_it         If true, force this transaction to the on-disk journal immediately.
+ *     callback         See description above.  Pass NULL for no callback.
+ *     callback_arg Argument passed to callback routine.
+ *
+ * Result
+ *              0              No errors
+ *             -1              An error occurred.  The journal is marked invalid.
+ */
+static int
+end_transaction(transaction *tr, int force_it, errno_t (*callback)(void*), void *callback_arg, boolean_t drop_lock, boolean_t must_wait)
+{
+       block_list_header  *blhdr=NULL, *next=NULL;
+       int             i, ret_val = 0;
+       errno_t         errno;
+       journal         *jnl = tr->jnl;
+       struct buf      *bp;
+       size_t          tbuffer_offset;
+       boolean_t       drop_lock_early;
 
-                       errno = buf_meta_bread(buf_vnode(blhdr->binfo[i].bp),
-                                                        buf_lblkno(blhdr->binfo[i].bp),
-                                                        buf_size(blhdr->binfo[i].bp),
-                                                        NOCRED,
-                                                        &bp);
-                       if (errno == 0 && bp != NULL) {
-                               struct vnode *save_vp;
-                               void *cur_filter;
-
-                               if (bp != blhdr->binfo[i].bp) {
-                                       panic("jnl: end_tr: got back a different bp! (bp 0x%x should be 0x%x, jnl 0x%x\n",
-                                                 bp, blhdr->binfo[i].bp, jnl);
-                               }
+       if (jnl->cur_tr) {
+               panic("jnl: jnl @ %p already has cur_tr %p, new tr: %p\n",
+                         jnl, jnl->cur_tr, tr);
+       }
 
-                               if ((buf_flags(bp) & (B_LOCKED|B_DELWRI)) != (B_LOCKED|B_DELWRI)) {
-                                       if (jnl->flags & JOURNAL_CLOSE_PENDING) {
-                                           buf_clearflags(bp, B_LOCKED);
-                                           buf_brelse(bp);
-                                               continue;
-                                       } else {
-                                               panic("jnl: end_tr: !!!DANGER!!! bp 0x%x flags (0x%x) not LOCKED & DELWRI\n", bp, buf_flags(bp));
-                                       }
-                               }
-                               save_vp = buf_vnode(bp);
+       // if there weren't any modified blocks in the transaction
+       // just save off the transaction pointer and return.
+       if (tr->total_bytes == jnl->jhdr->blhdr_size) {
+               jnl->cur_tr = tr;
+               goto done;
+       }
+       
+    // if our transaction buffer isn't very full, just hang
+    // on to it and don't actually flush anything.  this is
+    // what is known as "group commit".  we will flush the
+    // transaction buffer if it's full or if we have more than
+    // one of them so we don't start hogging too much memory.
+    //
+    // We also check the device supports UNMAP/TRIM, and if so,
+    // the number of extents waiting to be trimmed.  If it is
+    // small enough, then keep accumulating more (so we can
+    // reduce the overhead of trimming).  If there was a prior
+    // trim error, then we stop issuing trims for this
+    // volume, so we can also coalesce transactions.
+       //
+    if (   force_it == 0
+                  && (jnl->flags & JOURNAL_NO_GROUP_COMMIT) == 0 
+                  && tr->num_blhdrs < 3
+                  && (tr->total_bytes <= ((tr->tbuffer_size*tr->num_blhdrs) - tr->tbuffer_size/8))
+                  && (!(jnl->flags & JOURNAL_USE_UNMAP) || (tr->trim.extent_count < jnl_trim_flush_limit))) {
 
-                               buf_setfilter(bp, buffer_flushed_callback, tr, &cur_filter, NULL);
+               jnl->cur_tr = tr;
+               goto done;
+       }
 
-                               if (cur_filter) {
-                                       panic("jnl: bp @ 0x%x (blkno %qd, vp 0x%x) has non-null iodone (0x%x) buffflushcb 0x%x\n",
-                                                 bp, buf_blkno(bp), save_vp, cur_filter, buffer_flushed_callback);
-                               }
-                               buf_clearflags(bp, B_LOCKED);
+       KERNEL_DEBUG(0xbbbbc018|DBG_FUNC_START, jnl, tr, drop_lock, must_wait, 0);
 
-                               // kicking off the write here helps performance
-                               buf_bawrite(bp);
-                               // XXXdbg this is good for testing: buf_bdwrite(bp);
-                               //buf_bdwrite(bp);
-                               
-                               // this undoes the vnode_ref() in journal_modify_block_end()
-                               vnode_rele_ext(save_vp, 0, 1);
-                       } else {
-                               printf("jnl: end_transaction: could not find block %Ld vp 0x%x!\n",
-                                          blhdr->binfo[i].bnum, blhdr->binfo[i].bp);
-                               if (bp) {
-                                       buf_clearflags(bp, B_LOCKED);
-                                       buf_brelse(bp);
-                               }
-                       }
-               }
+       lock_condition(jnl, &jnl->flushing, "end_transaction");
 
-               next = (block_list_header *)((long)blhdr->binfo[0].bnum);
+       /*
+        * if the previous 'finish_end_transaction' was being run
+        * asynchronously, it could have encountered a condition
+        * that caused it to mark the journal invalid... if that
+        * occurred while we were waiting for it to finish, we
+        * need to notice and abort the current transaction
+        */
+       if ((jnl->flags & JOURNAL_INVALID) || jnl->flush_aborted == TRUE) {
+               unlock_condition(jnl, &jnl->flushing);
 
-               // we can free blhdr here since we won't need it any more
-               blhdr->binfo[0].bnum = 0xdeadc0de;
-               kmem_free(kernel_map, (vm_offset_t)blhdr, tr->tbuffer_size);
-    }
+               abort_transaction(jnl, tr);
+               ret_val = -1;
+               KERNEL_DEBUG(0xbbbbc018|DBG_FUNC_END, jnl, tr, ret_val, 0, 0);
+               goto done;
+       }
+       
+       /*
+        * Store a pointer to this transaction's trim list so that
+        * future transactions can find it.
+        *
+        * Note: if there are no extents in the trim list, then don't
+        * bother saving the pointer since nothing can add new extents
+        * to the list (and other threads/transactions only care if
+        * there is a trim pending).
+        */
+       lck_rw_lock_exclusive(&jnl->trim_lock);
+       if (jnl->async_trim != NULL)
+               panic("jnl: end_transaction: async_trim already non-NULL!");
+       if (tr->trim.extent_count > 0)
+               jnl->async_trim = &tr->trim;
+       lck_rw_unlock_exclusive(&jnl->trim_lock);
+
+       /*
+        * snapshot the transaction sequence number while we are still behind
+        * the journal lock since it will be bumped upon the start of the
+        * next transaction group which may overlap the current journal flush...
+        * we pass the snapshot into write_journal_header during the journal
+        * flush so that it can write the correct version in the header...
+        * because we hold the 'flushing' condition variable for the duration
+        * of the journal flush, 'saved_sequence_num' remains stable
+        */
+       jnl->saved_sequence_num = jnl->sequence_num;
+       
+       /*
+        * if we're here we're going to flush the transaction buffer to disk.
+        * 'check_free_space' will not return untl there is enough free
+        * space for this transaction in the journal and jnl->old_start[0]
+        * is avaiable for use
+        */
+       KERNEL_DEBUG(0xbbbbc030 | DBG_FUNC_START, jnl, 0, 0, 0, 0);
 
-    //printf("jnl: end_tr: tr @ 0x%x, jnl-blocks: 0x%llx - 0x%llx. exit!\n",
-    //   tr, tr->journal_start, tr->journal_end);
-    return 0;
+       check_free_space(jnl, tr->total_bytes, &tr->delayed_header_write, jnl->saved_sequence_num);
 
+       KERNEL_DEBUG(0xbbbbc030 | DBG_FUNC_END, jnl, tr->delayed_header_write, 0, 0, 0);
+
+       // range check the end index
+       if (jnl->jhdr->end <= 0 || jnl->jhdr->end > jnl->jhdr->size) {
+               panic("jnl: end_transaction: end is bogus 0x%llx (sz 0x%llx)\n",
+                         jnl->jhdr->end, jnl->jhdr->size);
+       }
+       if (tr->delayed_header_write == TRUE) {
+               thread_t        thread = THREAD_NULL;
+
+               lock_condition(jnl, &jnl->writing_header, "end_transaction");
+               /*
+                * fire up a thread to write the journal header
+                * asynchronously... when it finishes, it will call
+                * unlock_condition... we can overlap the preparation of
+                * the log and buffers during this time
+                */
+               kernel_thread_start((thread_continue_t)write_header_thread, jnl, &thread);
+       } else
+               jnl->write_header_failed = FALSE;
+
+
+       // this transaction starts where the current journal ends
+       tr->journal_start = jnl->jhdr->end;
+
+       lock_oldstart(jnl);
+       /*
+        * Because old_start is locked above, we can cast away the volatile qualifier before passing it to memcpy.
+        * slide everyone else down and put our latest guy in the last
+        * entry in the old_start array
+        */
+       memcpy(__CAST_AWAY_QUALIFIER(&jnl->old_start[0], volatile, void *), __CAST_AWAY_QUALIFIER(&jnl->old_start[1], volatile, void *), sizeof(jnl->old_start)-sizeof(jnl->old_start[0]));
+       jnl->old_start[sizeof(jnl->old_start)/sizeof(jnl->old_start[0]) - 1] = tr->journal_start | 0x8000000000000000LL;
+
+       unlock_oldstart(jnl);
+
+
+       for (blhdr = tr->blhdr; blhdr; blhdr = next) {
+               char    *blkptr;
+               buf_t   sbp;
+               int32_t bsize;
+
+               tbuffer_offset = jnl->jhdr->blhdr_size;
+
+               for (i = 1; i < blhdr->num_blocks; i++) {
+
+                       if (blhdr->binfo[i].bnum != (off_t)-1) {
+                               void (*func)(buf_t, void *);
+                               void  *arg;
+
+                               bp = blhdr->binfo[i].u.bp;
+
+                               if (bp == NULL) {
+                                       panic("jnl: inconsistent binfo (NULL bp w/bnum %lld; jnl @ %p, tr %p)\n",
+                                               blhdr->binfo[i].bnum, jnl, tr);
+                               }
+                               /*
+                                * acquire the bp here so that we can safely
+                                * mess around with its data.  buf_acquire()
+                                * will return EAGAIN if the buffer was busy,
+                                * so loop trying again.
+                                */
+                               do {
+                                       errno = buf_acquire(bp, BAC_REMOVE, 0, 0);
+                               } while (errno == EAGAIN);
+                                       
+                               if (errno)
+                                       panic("could not acquire bp %p (err %d)\n", bp, errno);
+
+                               if ((buf_flags(bp) & (B_LOCKED|B_DELWRI)) != (B_LOCKED|B_DELWRI)) {
+                                       if (jnl->flags & JOURNAL_CLOSE_PENDING) {
+                                               buf_clearflags(bp, B_LOCKED);
+                                               buf_brelse(bp);
+                                               
+                                               /*
+                                                * this is an odd case that appears to happen occasionally
+                                                * make sure we mark this block as no longer valid
+                                                * so that we don't process it in "finish_end_transaction" since
+                                                * the bp that is recorded in our array no longer belongs
+                                                * to us (normally we substitute a shadow bp to be processed
+                                                * issuing a 'buf_bawrite' on a stale buf_t pointer leads
+                                                * to all kinds of problems.
+                                                */
+                                               blhdr->binfo[i].bnum = (off_t)-1;
+                                               continue;
+                                       } else {
+                                               panic("jnl: end_tr: !!!DANGER!!! bp %p flags (0x%x) not LOCKED & DELWRI\n", bp, buf_flags(bp));
+                                       }
+                               }
+                               bsize = buf_size(bp);
+
+                               buf_setfilter(bp, NULL, NULL, &func, &arg);
+                               
+                               blkptr = (char *)&((char *)blhdr)[tbuffer_offset];
+
+                               sbp = buf_create_shadow_priv(bp, FALSE, (uintptr_t)blkptr, 0, 0);
+
+                               if (sbp == NULL)
+                                       panic("jnl: buf_create_shadow returned NULL");
+
+                               /*
+                                * copy the data into the transaction buffer...
+                                */
+                               memcpy(blkptr, (char *)buf_dataptr(bp), bsize);
+
+                               buf_clearflags(bp, B_LOCKED);
+                               buf_markclean(bp);
+                               buf_drop(bp);
+
+                               /*
+                                * adopt the shadow buffer for this block
+                                */
+                               if (func) {
+                                       /*
+                                        * transfer FS hook function to the
+                                        * shadow buffer... it will get called
+                                        * in finish_end_transaction
+                                        */
+                                       buf_setfilter(sbp, func, arg, NULL, NULL);
+                               }
+                               blhdr->binfo[i].u.bp = sbp;
+
+                       } else {
+                               // bnum == -1, only true if a block was "killed" 
+                               bsize = blhdr->binfo[i].u.bi.bsize;
+                       }
+                       tbuffer_offset += bsize;
+               }
+               next = (block_list_header *)((long)blhdr->binfo[0].bnum);
+       }
+       /*
+        * if callback != NULL, we don't want to drop the journal
+        * lock, or complete end_transaction asynchronously, since
+        * the caller is expecting the callback to run in the calling
+        * context
+        *
+        * if drop_lock == FALSE, we can't complete end_transaction
+        * asynchronously
+        */
+       if (callback)
+               drop_lock_early = FALSE;
+       else
+               drop_lock_early = drop_lock;
+
+       if (drop_lock_early == FALSE)
+               must_wait = TRUE;
+
+       if (drop_lock_early == TRUE) {
+               jnl->owner = NULL;
+               unlock_journal(jnl);
+               drop_lock = FALSE;
+       }
+       if (must_wait == TRUE)
+               ret_val = finish_end_transaction(tr, callback, callback_arg);
+       else {
+               thread_t        thread = THREAD_NULL;
+
+               /*
+                * fire up a thread to complete processing this transaction
+                * asynchronously... when it finishes, it will call
+                * unlock_condition
+                */
+               kernel_thread_start((thread_continue_t)finish_end_thread, tr, &thread);
+       }
+       KERNEL_DEBUG(0xbbbbc018|DBG_FUNC_END, jnl, tr, ret_val, 0, 0);
+done:
+       if (drop_lock == TRUE) {
+               jnl->owner = NULL;
+               unlock_journal(jnl);
+       }
+       return (ret_val);
+}
 
-  bad_journal:
-    jnl->flags |= JOURNAL_INVALID;
-    jnl->old_start[sizeof(jnl->old_start)/sizeof(jnl->old_start[0]) - 1] &= ~0x8000000000000000LL;
-    abort_transaction(jnl, tr);
-    return -1;
-}
 
 static void
-abort_transaction(journal *jnl, transaction *tr)
+finish_end_thread(transaction *tr)
 {
-    int                i;
-    errno_t            errno;
-    block_list_header *blhdr, *next;
-    struct buf        *bp;
-    struct vnode      *save_vp;
+       proc_set_task_policy(current_task(), current_thread(),
+                            TASK_POLICY_INTERNAL, TASK_POLICY_IOPOL, IOPOL_PASSIVE);
 
-    // for each block list header, iterate over the blocks then
-    // free up the memory associated with the block list.
-    //
-    // for each block, clear the lock bit and release it.
-    //
-    for(blhdr=tr->blhdr; blhdr; blhdr=next) {
+       finish_end_transaction(tr, NULL, NULL);
 
-               for(i=1; i < blhdr->num_blocks; i++) {
-                       if (blhdr->binfo[i].bp == NULL) {
-                               continue;
+       thread_deallocate(current_thread());
+       thread_terminate(current_thread());
+}
+
+static void
+write_header_thread(journal *jnl)
+{
+       proc_set_task_policy(current_task(), current_thread(),
+                            TASK_POLICY_INTERNAL, TASK_POLICY_IOPOL, IOPOL_PASSIVE);
+
+       if (write_journal_header(jnl, 1, jnl->saved_sequence_num))
+               jnl->write_header_failed = TRUE;
+       else
+               jnl->write_header_failed = FALSE;
+       unlock_condition(jnl, &jnl->writing_header);
+
+       thread_deallocate(current_thread());
+       thread_terminate(current_thread());
+}
+
+static int
+finish_end_transaction(transaction *tr, errno_t (*callback)(void*), void *callback_arg)
+{
+       int             i, amt;
+       int             ret = 0;
+       off_t           end;
+       journal         *jnl = tr->jnl;
+       buf_t           bp, *bparray;
+       vnode_t         vp;
+       block_list_header  *blhdr=NULL, *next=NULL;
+       size_t          tbuffer_offset;
+       int             bufs_written = 0;
+       int             ret_val = 0;
+
+       KERNEL_DEBUG(0xbbbbc028|DBG_FUNC_START, jnl, tr, 0, 0, 0);
+
+       end  = jnl->jhdr->end;
+
+       for (blhdr = tr->blhdr; blhdr; blhdr = (block_list_header *)((long)blhdr->binfo[0].bnum)) {
+
+               amt = blhdr->bytes_used;
+
+               blhdr->binfo[0].u.bi.b.sequence_num = tr->sequence_num;
+
+               blhdr->checksum = 0;
+               blhdr->checksum = calc_checksum((char *)blhdr, BLHDR_CHECKSUM_SIZE);
+
+               if (kmem_alloc(kernel_map, (vm_offset_t *)&bparray, blhdr->num_blocks * sizeof(struct buf *))) {
+                       panic("can't allocate %zd bytes for bparray\n", blhdr->num_blocks * sizeof(struct buf *));
+               }
+               tbuffer_offset = jnl->jhdr->blhdr_size;
+
+               for (i = 1; i < blhdr->num_blocks; i++) {
+                       void (*func)(buf_t, void *);
+                       void    *arg;
+                       int32_t bsize;
+                   
+                       /*
+                        * finish preparing the shadow buf_t before 
+                        * calculating the individual block checksums
+                        */
+                       if (blhdr->binfo[i].bnum != (off_t)-1) {
+                               daddr64_t blkno;
+                               daddr64_t lblkno;
+
+                               bp = blhdr->binfo[i].u.bp;
+                               
+                               vp = buf_vnode(bp);
+                               blkno = buf_blkno(bp);
+                               lblkno = buf_lblkno(bp);
+
+                               if (vp == NULL && lblkno == blkno) {
+                                       printf("jnl: %s: end_tr: bad news! bp @ %p w/null vp and l/blkno = %qd/%qd.  aborting the transaction (tr %p jnl %p).\n",
+                                              jnl->jdev_name, bp, lblkno, blkno, tr, jnl);
+                                       ret_val = -1;
+                                       goto bad_journal;
+                               }
+           
+                               // if the lblkno is the same as blkno and this bp isn't
+                               // associated with the underlying file system device then
+                               // we need to call bmap() to get the actual physical block.
+                               //
+                               if ((lblkno == blkno) && (vp != jnl->fsdev)) {
+                                       off_t   f_offset;
+                                       size_t  contig_bytes;
+
+                                       if (VNOP_BLKTOOFF(vp, lblkno, &f_offset)) {
+                                               printf("jnl: %s: end_tr: vnop_blktooff failed @ %p, jnl %p\n", jnl->jdev_name, bp, jnl);
+                                               ret_val = -1;
+                                               goto bad_journal;
+                                       }
+                                       if (VNOP_BLOCKMAP(vp, f_offset, buf_count(bp), &blkno, &contig_bytes, NULL, 0, NULL)) {
+                                               printf("jnl: %s: end_tr: can't blockmap the bp @ %p, jnl %p\n", jnl->jdev_name, bp, jnl);
+                                               ret_val = -1;
+                                               goto bad_journal;
+                                       }
+                                       if ((uint32_t)contig_bytes < buf_count(bp)) {
+                                               printf("jnl: %s: end_tr: blk not physically contiguous on disk@ %p, jnl %p\n", jnl->jdev_name, bp, jnl);
+                                               ret_val = -1;
+                                               goto bad_journal;
+                                       }
+                                       buf_setblkno(bp, blkno);
+                               }
+                               // update this so we write out the correct physical block number!
+                               blhdr->binfo[i].bnum = (off_t)(blkno);
+
+                               /*
+                                * pick up the FS hook function (if any) and prepare
+                                * to fire this buffer off in the next pass
+                                */
+                               buf_setfilter(bp, buffer_flushed_callback, tr, &func, &arg);
+
+                               if (func) {
+                                       /*
+                                        * call the hook function supplied by the filesystem...
+                                        * this needs to happen BEFORE cacl_checksum in case
+                                        * the FS morphs the data in the buffer
+                                        */
+                                       func(bp, arg);
+                               }
+                               bparray[i] = bp;
+                               bsize = buf_size(bp);
+                               blhdr->binfo[i].u.bi.bsize = bsize;
+                               blhdr->binfo[i].u.bi.b.cksum = calc_checksum(&((char *)blhdr)[tbuffer_offset], bsize);
+                       } else {
+                               bparray[i] = NULL;
+                               bsize = blhdr->binfo[i].u.bi.bsize;
+                               blhdr->binfo[i].u.bi.b.cksum = 0;
                        }
-                       if ( (buf_vnode(blhdr->binfo[i].bp) == NULL) ||
-                            !(buf_flags(blhdr->binfo[i].bp) & B_LOCKED) ) {
-                               continue;
+                       tbuffer_offset += bsize;
+               }
+               /*
+                * if we fired off the journal_write_header asynchronously in
+                * 'end_transaction', we need to wait for its completion
+                * before writing the actual journal data
+                */
+               wait_condition(jnl, &jnl->writing_header, "finish_end_transaction");
+
+               if (jnl->write_header_failed == FALSE)
+                       ret = write_journal_data(jnl, &end, blhdr, amt);
+               else 
+                       ret_val = -1;
+               /*
+                * put the bp pointers back so that we can 
+                * make the final pass on them
+                */
+               for (i = 1; i < blhdr->num_blocks; i++)
+                       blhdr->binfo[i].u.bp = bparray[i];
+
+               kmem_free(kernel_map, (vm_offset_t)bparray, blhdr->num_blocks * sizeof(struct buf *));
+
+               if (ret_val == -1)
+                       goto bad_journal;
+
+               if (ret != amt) {
+                       printf("jnl: %s: end_transaction: only wrote %d of %d bytes to the journal!\n",
+                              jnl->jdev_name, ret, amt);
+
+                       ret_val = -1;
+                       goto bad_journal;
+               }
+       }
+       jnl->jhdr->end  = end;    // update where the journal now ends
+       tr->journal_end = end;    // the transaction ends here too
+
+       if (tr->journal_start == 0 || tr->journal_end == 0) {
+               panic("jnl: end_transaction: bad tr journal start/end: 0x%llx 0x%llx\n",
+                     tr->journal_start, tr->journal_end);
+       }
+
+       if (write_journal_header(jnl, 0, jnl->saved_sequence_num) != 0) {
+               ret_val = -1;
+               goto bad_journal;
+       }
+       /*
+        * If the caller supplied a callback, call it now that the blocks have been
+        * written to the journal.  This is used by journal_relocate so, for example,
+        * the file system can change its pointer to the new journal.
+        */
+       if (callback != NULL && callback(callback_arg) != 0) {
+               ret_val = -1;
+               goto bad_journal;
+       }
+       
+       //
+       // Send a DKIOCUNMAP for the extents trimmed by this transaction, and
+       // free up the extent list.
+       //
+       journal_trim_flush(jnl, tr);
+       
+       // the buffer_flushed_callback will only be called for the 
+       // real blocks that get flushed so we have to account for 
+       // the block_list_headers here.
+       //
+       tr->num_flushed = tr->num_blhdrs * jnl->jhdr->blhdr_size;
+
+       lock_condition(jnl, &jnl->asyncIO, "finish_end_transaction");
+
+       //
+       // setup for looping through all the blhdr's.
+       //
+       for (blhdr = tr->blhdr; blhdr; blhdr = next) {
+               uint16_t        num_blocks;
+
+               /*
+                * grab this info ahead of issuing the buf_bawrites...
+                * once the last one goes out, its possible for blhdr
+                * to be freed (especially if we get preempted) before
+                * we do the last check of num_blocks or
+                * grab the next blhdr pointer...
+                */
+               next = (block_list_header *)((long)blhdr->binfo[0].bnum);
+               num_blocks = blhdr->num_blocks;
+
+               /*
+                * we can re-order the buf ptrs because everything is written out already
+                */
+               qsort(&blhdr->binfo[1], num_blocks-1, sizeof(block_info), journal_binfo_cmp);
+
+               /*
+                * need to make sure that the loop issuing the buf_bawrite's
+                * does not touch blhdr once the last buf_bawrite has been
+                * issued... at that point, we no longer have a legitmate
+                * reference on the associated storage since it will be
+                * released upon the completion of that last buf_bawrite
+                */
+               for (i = num_blocks-1; i >= 1; i--) {
+                       if (blhdr->binfo[i].bnum != (off_t)-1)
+                               break;
+                       num_blocks--;
+               }
+               for (i = 1; i < num_blocks; i++) {
+
+                       if ((bp = blhdr->binfo[i].u.bp)) {
+                               vp = buf_vnode(bp);
+                   
+                               buf_bawrite(bp);
+                               
+                               // this undoes the vnode_ref() in journal_modify_block_end()
+                               vnode_rele_ext(vp, 0, 1);
+
+                               bufs_written++;
                        }
+               }
+       }
+       if (bufs_written == 0) {
+               /*
+                * since we didn't issue any buf_bawrite's, there is no
+                * async trigger to cause the memory associated with this
+                * transaction to be freed... so, move it to the garbage
+                * list now
+                */
+               lock_oldstart(jnl);
 
-                       errno = buf_meta_bread(buf_vnode(blhdr->binfo[i].bp),
-                                                        buf_lblkno(blhdr->binfo[i].bp),
-                                                        buf_size(blhdr->binfo[i].bp),
-                                                        NOCRED,
-                                                        &bp);
-                       if (errno == 0) {
-                               if (bp != blhdr->binfo[i].bp) {
-                                       panic("jnl: abort_tr: got back a different bp! (bp 0x%x should be 0x%x, jnl 0x%x\n",
-                                                 bp, blhdr->binfo[i].bp, jnl);
-                               }
+               tr->next       = jnl->tr_freeme;
+               jnl->tr_freeme = tr;
 
-                               // releasing a bp marked invalid
-                               // also clears the locked and delayed state
-                               buf_markinvalid(bp);
-                               save_vp = buf_vnode(bp);
+               unlock_oldstart(jnl);
 
-                               buf_brelse(bp);
+               unlock_condition(jnl, &jnl->asyncIO);
+       }
 
-                               vnode_rele_ext(save_vp, 0, 1);
-                       } else {
-                               printf("jnl: abort_tr: could not find block %Ld vp 0x%x!\n",
-                                          blhdr->binfo[i].bnum, blhdr->binfo[i].bp);
-                               if (bp) {
+       //printf("jnl: end_tr: tr @ 0x%x, jnl-blocks: 0x%llx - 0x%llx. exit!\n",
+       //   tr, tr->journal_start, tr->journal_end);
+
+bad_journal:
+       if (ret_val == -1) {
+               /*
+                * 'flush_aborted' is protected by the flushing condition... we need to
+                * set it before dropping the condition so that it will be
+                * noticed in 'end_transaction'... we add this additional
+                * aborted condition so that we can drop the 'flushing' condition
+                * before grabbing the journal lock... this avoids a deadlock
+                * in 'end_transaction' which is holding the journal lock while
+                * waiting for the 'flushing' condition to clear...
+                * everyone else will notice the JOURNAL_INVALID flag
+                */
+               jnl->flush_aborted = TRUE;
+
+               unlock_condition(jnl, &jnl->flushing);
+               lock_journal(jnl);
+
+               jnl->flags |= JOURNAL_INVALID;
+               jnl->old_start[sizeof(jnl->old_start)/sizeof(jnl->old_start[0]) - 1] &= ~0x8000000000000000LL;
+               abort_transaction(jnl, tr);             // cleans up list of extents to be trimmed
+
+               unlock_journal(jnl);
+       } else
+               unlock_condition(jnl, &jnl->flushing);
+
+       KERNEL_DEBUG(0xbbbbc028|DBG_FUNC_END, jnl, tr, bufs_written, ret_val, 0);
+
+       return (ret_val);
+}
+
+
+static void
+lock_condition(journal *jnl, boolean_t *condition, const char *condition_name)
+{
+
+       KERNEL_DEBUG(0xbbbbc020|DBG_FUNC_START, jnl, condition, 0, 0, 0);
+
+       lock_flush(jnl);
+
+       while (*condition == TRUE)
+               msleep(condition, &jnl->flock, PRIBIO, condition_name, NULL);
+
+       *condition = TRUE;
+       unlock_flush(jnl);
+
+       KERNEL_DEBUG(0xbbbbc020|DBG_FUNC_END, jnl, condition, 0, 0, 0);
+}
+
+static void
+wait_condition(journal *jnl, boolean_t *condition, const char *condition_name)
+{
+
+       if (*condition == FALSE)
+               return;
+
+       KERNEL_DEBUG(0xbbbbc02c|DBG_FUNC_START, jnl, condition, 0, 0, 0);
+
+       lock_flush(jnl);
+
+       while (*condition == TRUE)
+               msleep(condition, &jnl->flock, PRIBIO, condition_name, NULL);
+
+       unlock_flush(jnl);
+
+       KERNEL_DEBUG(0xbbbbc02c|DBG_FUNC_END, jnl, condition, 0, 0, 0);
+}
+
+static void
+unlock_condition(journal *jnl, boolean_t *condition)
+{
+       lock_flush(jnl);
+
+       *condition = FALSE;
+       wakeup(condition);
+
+       unlock_flush(jnl);
+}
+
+static void
+abort_transaction(journal *jnl, transaction *tr)
+{
+       block_list_header *blhdr, *next;
+
+       // for each block list header, iterate over the blocks then
+       // free up the memory associated with the block list.
+       //
+       // find each of the primary blocks (i.e. the list could
+       // contain a mix of shadowed and real buf_t's depending
+       // on when the abort condition was detected) and mark them
+       // clean and locked in the cache... this at least allows 
+       // the FS a consistent view between it's incore data structures
+       // and the meta-data held in the cache
+       //
+       KERNEL_DEBUG(0xbbbbc034|DBG_FUNC_START, jnl, tr, 0, 0, 0);
+
+       for (blhdr = tr->blhdr; blhdr; blhdr = next) {
+               int     i;
+               
+               for (i = 1; i < blhdr->num_blocks; i++) {
+                       buf_t           bp, tbp, sbp;
+                       vnode_t         bp_vp;
+                       errno_t         errno;
+
+                       if (blhdr->binfo[i].bnum == (off_t)-1)
+                               continue;
+
+                       tbp = blhdr->binfo[i].u.bp;
+
+                       bp_vp = buf_vnode(tbp);
+
+                       buf_setfilter(tbp, NULL, NULL, NULL, NULL);
+
+                       if (buf_shadow(tbp))
+                               sbp = tbp;
+                       else
+                               sbp = NULL;
+
+                       if (bp_vp) {
+                               errno = buf_meta_bread(bp_vp,
+                                                      buf_lblkno(tbp),
+                                                      buf_size(tbp),
+                                                      NOCRED,
+                                                      &bp);
+                               if (errno == 0) {
+                                       if (sbp == NULL && bp != tbp && (buf_flags(tbp) & B_LOCKED)) {
+                                               panic("jnl: abort_tr: got back a different bp! (bp %p should be %p, jnl %p\n",
+                                                     bp, tbp, jnl);
+                                       }
+                                       /*
+                                        * once the journal has been marked INVALID and aborted,
+                                        * NO meta data can be written back to the disk, so 
+                                        * mark the buf_t clean and make sure it's locked in the cache
+                                        * note: if we found a shadow, the real buf_t needs to be relocked
+                                        */
+                                       buf_setflags(bp, B_LOCKED);
+                                       buf_markclean(bp);
                                        buf_brelse(bp);
+
+                                       KERNEL_DEBUG(0xbbbbc034|DBG_FUNC_NONE, jnl, tr, bp, 0, 0);
+
+                                       /*
+                                        * this undoes the vnode_ref() in journal_modify_block_end()
+                                        */
+                                       vnode_rele_ext(bp_vp, 0, 1);
+                               } else {
+                                       printf("jnl: %s: abort_tr: could not find block %lld vp %p!\n",
+                                              jnl->jdev_name, blhdr->binfo[i].bnum, tbp);
+                                       if (bp) {
+                                               buf_brelse(bp);
+                                       }
                                }
                        }
+                       if (sbp)
+                               buf_brelse(sbp);
                }
-
                next = (block_list_header *)((long)blhdr->binfo[0].bnum);
 
                // we can free blhdr here since we won't need it any more
                blhdr->binfo[0].bnum = 0xdeadc0de;
                kmem_free(kernel_map, (vm_offset_t)blhdr, tr->tbuffer_size);
-    }
+       }
 
-    tr->tbuffer     = NULL;
-    tr->blhdr       = NULL;
-    tr->total_bytes = 0xdbadc0de;
+       /*
+        * If the transaction we're aborting was the async transaction, then
+        * tell the current transaction that there is no pending trim
+        * any more.
+        */
+       lck_rw_lock_exclusive(&jnl->trim_lock);
+       if (jnl->async_trim == &tr->trim)
+               jnl->async_trim = NULL;
+       lck_rw_unlock_exclusive(&jnl->trim_lock);
+       
+       
+       if (tr->trim.extents) {
+               kfree(tr->trim.extents, tr->trim.allocated_count * sizeof(dk_extent_t));
+       }
+       tr->trim.allocated_count = 0;
+       tr->trim.extent_count = 0;
+       tr->trim.extents = NULL;
+       tr->tbuffer     = NULL;
+       tr->blhdr       = NULL;
+       tr->total_bytes = 0xdbadc0de;
        FREE_ZONE(tr, sizeof(transaction), M_JNL_TR);
+
+       KERNEL_DEBUG(0xbbbbc034|DBG_FUNC_END, jnl, tr, 0, 0, 0);
 }
 
 
 int
 journal_end_transaction(journal *jnl)
 {
-    int ret;
+       int ret;
        transaction *tr;
     
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
+
+       free_old_stuff(jnl);
 
        if ((jnl->flags & JOURNAL_INVALID) && jnl->owner == NULL) {
                return 0;
        }
 
-    if (jnl->owner != current_thread()) {
-               panic("jnl: end_tr: I'm not the owner! jnl 0x%x, owner 0x%x, curact 0x%x\n",
-                         jnl, jnl->owner, current_thread());
-    }
-
-    free_old_stuff(jnl);
+       if (jnl->owner != current_thread()) {
+               panic("jnl: end_tr: I'm not the owner! jnl %p, owner %p, curact %p\n",
+                     jnl, jnl->owner, current_thread());
+       }
+       jnl->nested_count--;
 
-    jnl->nested_count--;
-    if (jnl->nested_count > 0) {
+       if (jnl->nested_count > 0) {
                return 0;
-    } else if (jnl->nested_count < 0) {
-               panic("jnl: jnl @ 0x%x has negative nested count (%d). bad boy.\n", jnl, jnl->nested_count);
-    }
+       } else if (jnl->nested_count < 0) {
+               panic("jnl: jnl @ %p has negative nested count (%d). bad boy.\n", jnl, jnl->nested_count);
+       }
     
-    if (jnl->flags & JOURNAL_INVALID) {
+       if (jnl->flags & JOURNAL_INVALID) {
                if (jnl->active_tr) {
                        if (jnl->cur_tr != NULL) {
-                               panic("jnl: journal @ 0x%x has active tr (0x%x) and cur tr (0x%x)\n",
-                                         jnl, jnl->active_tr, jnl->cur_tr);
+                               panic("jnl: journal @ %p has active tr (%p) and cur tr (%p)\n",
+                                     jnl, jnl->active_tr, jnl->cur_tr);
                        }
-           
                        tr             = jnl->active_tr;
                        jnl->active_tr = NULL;
+
                        abort_transaction(jnl, tr);
                }
-
                jnl->owner = NULL;
                unlock_journal(jnl);
 
                return EINVAL;
-    }
-
-    tr = jnl->active_tr;
-    CHECK_TRANSACTION(tr);
+       }
 
-    // clear this out here so that when check_free_space() calls
-    // the FS flush function, we don't panic in journal_flush()
-    // if the FS were to call that.  note: check_free_space() is
-    // called from end_transaction().
-    // 
-    jnl->active_tr = NULL;
-    ret = end_transaction(tr, 0);
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
 
-    jnl->owner = NULL;
-    unlock_journal(jnl);
+       // clear this out here so that when check_free_space() calls
+       // the FS flush function, we don't panic in journal_flush()
+       // if the FS were to call that.  note: check_free_space() is
+       // called from end_transaction().
+       // 
+       jnl->active_tr = NULL;
+       
+       /* Examine the force-journal-flush state in the active txn */
+       if (tr->flush_on_completion == TRUE) {
+               /*
+                * If the FS requested it, disallow group commit and force the
+                * transaction out to disk immediately.
+                */
+               ret = end_transaction(tr, 1, NULL, NULL, TRUE, TRUE);
+       }
+       else {
+               /* in the common path we can simply use the double-buffered journal */
+               ret = end_transaction(tr, 0, NULL, NULL, TRUE, FALSE);
+       }
 
-    return ret;
+       return ret;
 }
 
 
+/* 
+ * Flush the contents of the journal to the disk. 
+ *
+ *  Input: 
+ *     wait_for_IO - 
+ *     If TRUE, wait to write in-memory journal to the disk 
+ *     consistently, and also wait to write all asynchronous 
+ *     metadata blocks to its corresponding locations
+ *     consistently on the disk.  This means that the journal 
+ *     is empty at this point and does not contain any 
+ *     transactions.  This is overkill in normal scenarios  
+ *     but is useful whenever the metadata blocks are required 
+ *     to be consistent on-disk instead of just the journal 
+ *     being consistent; like before live verification 
+ *     and live volume resizing.  
+ *
+ *     If FALSE, only wait to write in-memory journal to the 
+ *     disk consistently.  This means that the journal still 
+ *     contains uncommitted transactions and the file system 
+ *     metadata blocks in the journal transactions might be 
+ *     written asynchronously to the disk.  But there is no 
+ *     guarantee that they are written to the disk before 
+ *     returning to the caller.  Note that this option is 
+ *     sufficient for file system data integrity as it 
+ *     guarantees consistent journal content on the disk.
+ */
 int
-journal_flush(journal *jnl)
+journal_flush(journal *jnl, boolean_t wait_for_IO)
 {
-    int need_signal = 0;
+       boolean_t drop_lock = FALSE;
     
-    CHECK_JOURNAL(jnl);
+       CHECK_JOURNAL(jnl);
     
-    if (jnl->flags & JOURNAL_INVALID) {
+       free_old_stuff(jnl);
+
+       if (jnl->flags & JOURNAL_INVALID) {
                return -1;
-    }
+       }
 
-    if (jnl->owner != current_thread()) {
-               int ret;
+       KERNEL_DEBUG(DBG_JOURNAL_FLUSH | DBG_FUNC_START, jnl, 0, 0, 0, 0);
 
+       if (jnl->owner != current_thread()) {
                lock_journal(jnl);
-               need_signal = 1;
-    }
-
-    free_old_stuff(jnl);
+               drop_lock = TRUE;
+       }
 
-    // if we're not active, flush any buffered transactions
-    if (jnl->active_tr == NULL && jnl->cur_tr) {
+       // if we're not active, flush any buffered transactions
+       if (jnl->active_tr == NULL && jnl->cur_tr) {
                transaction *tr = jnl->cur_tr;
 
                jnl->cur_tr = NULL;
-               end_transaction(tr, 1);   // force it to get flushed
-    }
 
-    if (need_signal) {
-               unlock_journal(jnl);
-    }
+               if (wait_for_IO) {
+                       wait_condition(jnl, &jnl->flushing, "journal_flush");
+                       wait_condition(jnl, &jnl->asyncIO, "journal_flush");
+               }
+               /*
+                * "end_transction" will wait for any current async flush
+                * to complete, before flushing "cur_tr"... because we've
+                * specified the 'must_wait' arg as TRUE, it will then
+                * synchronously flush the "cur_tr"
+                */
+               end_transaction(tr, 1, NULL, NULL, drop_lock, TRUE);   // force it to get flushed
+
+       } else  { 
+               if (drop_lock == TRUE) {
+                       unlock_journal(jnl);
+               }
 
-    return 0;
+               /* Because of pipelined journal, the journal transactions 
+                * might be in process of being flushed on another thread.  
+                * If there is nothing to flush currently, we should 
+                * synchronize ourselves with the pipelined journal thread 
+                * to ensure that all inflight transactions, if any, are 
+                * flushed before we return success to caller.
+                */
+               wait_condition(jnl, &jnl->flushing, "journal_flush");
+       }
+       if (wait_for_IO) {
+               wait_condition(jnl, &jnl->asyncIO, "journal_flush");
+       }
+
+       KERNEL_DEBUG(DBG_JOURNAL_FLUSH | DBG_FUNC_END, jnl, 0, 0, 0, 0);
+
+       return 0;
 }
 
 int
 journal_active(journal *jnl)
 {
-    if (jnl->flags & JOURNAL_INVALID) {
+       if (jnl->flags & JOURNAL_INVALID) {
                return -1;
-    }
+       }
     
-    return (jnl->active_tr == NULL) ? 0 : 1;
+       return (jnl->active_tr == NULL) ? 0 : 1;
 }
 
 void *
 journal_owner(journal *jnl)
 {
-    return jnl->owner;
+       return jnl->owner;
+}
+
+int journal_uses_fua(journal *jnl)
+{
+       if (jnl->flags & JOURNAL_DO_FUA_WRITES)
+               return 1;
+       return 0;
+}
+
+/*
+ * Relocate the journal.
+ * 
+ * You provide the new starting offset and size for the journal. You may
+ * optionally provide a new tbuffer_size; passing zero defaults to not
+ * changing the tbuffer size except as needed to fit within the new journal
+ * size.
+ * 
+ * You must have already started a transaction. The transaction may contain
+ * modified blocks (such as those needed to deallocate the old journal,
+ * allocate the new journal, and update the location and size of the journal
+ * in filesystem-private structures). Any transactions prior to the active
+ * transaction will be flushed to the old journal. The new journal will be
+ * initialized, and the blocks from the active transaction will be written to
+ * the new journal.
+ *
+ * The caller will need to update the structures that identify the location
+ * and size of the journal.  These updates should be made in the supplied
+ * callback routine.  These updates must NOT go into a transaction.  You should
+ * force these updates to the media before returning from the callback.  In the
+ * even of a crash, either the old journal will be found, with an empty journal,
+ * or the new journal will be found with the contents of the active transaction.
+ *
+ * Upon return from the callback, the blocks from the active transaction are
+ * written to their normal locations on disk.
+ *
+ * (Remember that we have to ensure that blocks get committed to the journal
+ * before being committed to their normal locations.  But the blocks don't count
+ * as committed until the new journal is pointed at.)
+ *
+ * Upon return, there is still an active transaction: newly allocated, and
+ * with no modified blocks.  Call journal_end_transaction as normal.  You may
+ * modifiy additional blocks before calling journal_end_transaction, and those
+ * blocks will (eventually) go to the relocated journal.
+ *
+ * Inputs:
+ *     jnl                             The (opened) journal to relocate.
+ *     offset                  The new journal byte offset (from start of the journal device).
+ *     journal_size    The size, in bytes, of the new journal.
+ *     tbuffer_size    The new desired transaction buffer size.  Pass zero to keep
+ *                                     the same size as the current journal.  The size will be
+ *                                     modified as needed to fit the new journal.
+ *     callback                Routine called after the new journal has been initialized,
+ *                                     and the active transaction written to the new journal, but
+ *                                     before the blocks are written to their normal locations.
+ *                                     Pass NULL for no callback.
+ *     callback_arg    An argument passed to the callback routine.
+ *
+ * Result:
+ *     0                               No errors
+ *     EINVAL                  The offset is not block aligned
+ *     EINVAL                  The journal_size is not a multiple of the block size
+ *     EINVAL                  The journal is invalid
+ *     (any)                   An error returned by journal_flush.
+ *
+ */
+int journal_relocate(journal *jnl, off_t offset, off_t journal_size, int32_t tbuffer_size,
+       errno_t (*callback)(void *), void *callback_arg)
+{
+       int             ret;
+       transaction     *tr;
+       size_t i = 0;
+
+       /*
+        * Sanity check inputs, and adjust the size of the transaction buffer.
+        */
+       if ((offset % jnl->jhdr->jhdr_size) != 0) {
+               printf("jnl: %s: relocate: offset 0x%llx is not an even multiple of block size 0x%x\n",
+                      jnl->jdev_name, offset, jnl->jhdr->jhdr_size);
+               return EINVAL;
+       }
+       if ((journal_size % jnl->jhdr->jhdr_size) != 0) {
+               printf("jnl: %s: relocate: journal size 0x%llx is not an even multiple of block size 0x%x\n",
+                      jnl->jdev_name, journal_size, jnl->jhdr->jhdr_size);
+               return EINVAL;
+       }
+
+       CHECK_JOURNAL(jnl);
+
+       /* Guarantee we own the active transaction. */
+       if (jnl->flags & JOURNAL_INVALID) {
+               return EINVAL;
+       }
+       if (jnl->owner != current_thread()) {
+               panic("jnl: relocate: Not the owner! jnl %p, owner %p, curact %p\n",
+                     jnl, jnl->owner, current_thread());
+       }
+       
+       if (tbuffer_size == 0)
+               tbuffer_size = jnl->tbuffer_size;
+       size_up_tbuffer(jnl, tbuffer_size, jnl->jhdr->jhdr_size);
+       
+       /*
+        * Flush any non-active transactions.  We have to temporarily hide the
+        * active transaction to make journal_flush flush out non-active but
+        * current (unwritten) transactions.
+        */
+       tr = jnl->active_tr;
+       CHECK_TRANSACTION(tr);
+       jnl->active_tr = NULL;
+       ret = journal_flush(jnl, TRUE);
+       jnl->active_tr = tr;
+
+       if (ret) {
+               return ret;
+       }
+       wait_condition(jnl, &jnl->flushing, "end_transaction");
+
+       /*
+        * At this point, we have completely flushed the contents of the current
+        * journal to disk (and have asynchronously written all of the txns to 
+        * their actual desired locations).  As a result, we can (and must) clear 
+        * out the old_start array.  If we do not, then if the last written transaction
+        * started at the beginning of the journal (starting 1 block into the 
+        * journal file) it could confuse the buffer_flushed callback. This is
+        * because we're about to reset the start/end pointers of the journal header
+        * below. 
+        */
+       lock_oldstart(jnl); 
+       for (i = 0; i < sizeof (jnl->old_start) / sizeof(jnl->old_start[0]); i++) { 
+               jnl->old_start[i] = 0; 
+       }
+       unlock_oldstart(jnl);
+
+       /* Update the journal's offset and size in memory. */
+       jnl->jdev_offset = offset;
+       jnl->jhdr->start = jnl->jhdr->end = jnl->jhdr->jhdr_size;
+       jnl->jhdr->size = journal_size;
+       jnl->active_start = jnl->jhdr->start;
+       
+       /*
+        * Force the active transaction to be written to the new journal.  Call the
+        * supplied callback after the blocks have been written to the journal, but
+        * before they get written to their normal on-disk locations.
+        */
+       jnl->active_tr = NULL;
+       ret = end_transaction(tr, 1, callback, callback_arg, FALSE, TRUE);
+       if (ret) {
+               printf("jnl: %s: relocate: end_transaction failed (%d)\n", jnl->jdev_name, ret);
+               goto bad_journal;
+       }
+       
+       /*
+        * Create a new, empty transaction to be the active transaction.  This way
+        * our caller can use journal_end_transaction as usual.
+        */
+       ret = journal_allocate_transaction(jnl);
+       if (ret) {
+               printf("jnl: %s: relocate: could not allocate new transaction (%d)\n", jnl->jdev_name, ret);
+               goto bad_journal;
+       }
+       
+       return 0;
+
+bad_journal:
+       jnl->flags |= JOURNAL_INVALID;
+       abort_transaction(jnl, tr);
+       return ret;
+}
+
+
+#else   // !JOURNALING - so provide stub functions
+
+int journal_uses_fua(__unused journal *jnl)
+{
+       return 0;
+}
+
+journal *
+journal_create(__unused struct vnode *jvp,
+              __unused off_t         offset,
+              __unused off_t         journal_size,
+              __unused struct vnode *fsvp,
+              __unused size_t        min_fs_blksz,
+              __unused int32_t       flags,
+              __unused int32_t       tbuffer_size,
+              __unused void        (*flush)(void *arg),
+              __unused void         *arg,
+              __unused struct mount *fsmount)
+{
+    return NULL;
+}
+
+journal *
+journal_open(__unused struct vnode *jvp,
+            __unused off_t         offset,
+            __unused off_t         journal_size,
+            __unused struct vnode *fsvp,
+            __unused size_t        min_fs_blksz,
+            __unused int32_t       flags,
+            __unused int32_t       tbuffer_size,
+            __unused void        (*flush)(void *arg),
+            __unused void         *arg,
+            __unused struct mount *fsmount)
+{
+       return NULL;
+}
+
+
+int
+journal_modify_block_start(__unused journal *jnl, __unused struct buf *bp)
+{
+       return EINVAL;
+}
+
+int
+journal_modify_block_end(__unused journal *jnl,
+                        __unused struct buf *bp,
+                        __unused void (*func)(struct buf *bp, void *arg),
+                        __unused void *arg)
+{
+       return EINVAL;
+}
+
+int
+journal_kill_block(__unused journal *jnl, __unused struct buf *bp)
+{
+       return EINVAL;
+}
+
+int journal_relocate(__unused journal *jnl,
+                    __unused off_t offset,
+                    __unused off_t journal_size,
+                    __unused int32_t tbuffer_size,
+                    __unused errno_t (*callback)(void *),
+                    __unused void *callback_arg)
+{
+       return EINVAL;
+}
+
+void
+journal_close(__unused journal *jnl)
+{
+}
+
+int
+journal_start_transaction(__unused journal *jnl)
+{
+       return EINVAL;
+}
+
+int
+journal_end_transaction(__unused journal *jnl)
+{
+       return EINVAL;
+}
+
+int
+journal_flush(__unused journal *jnl, __unused boolean_t wait_for_IO)
+{
+       return EINVAL;
+}
+
+int
+journal_is_clean(__unused struct vnode *jvp,
+                __unused off_t         offset,
+                __unused off_t         journal_size,
+                __unused struct vnode *fsvp,
+                 __unused size_t        min_fs_block_size)
+{
+       return 0;
+}
+
+
+void *
+journal_owner(__unused journal *jnl)
+{
+       return NULL;
 }
+#endif  // !JOURNALING