* Copyright (c) 1998-2005 Apple Computer, Inc. All rights reserved.
*
* @APPLE_OSREFERENCE_LICENSE_HEADER_START@
- *
+ *
* This file contains Original Code and/or Modifications of Original Code
* as defined in and that are subject to the Apple Public Source License
* Version 2.0 (the 'License'). You may not use this file except in
* unlawful or unlicensed copies of an Apple operating system, or to
* circumvent, violate, or enable the circumvention or violation of, any
* terms of an Apple operating system software license agreement.
- *
+ *
* Please obtain a copy of the License at
* http://www.opensource.apple.com/apsl/ and read it before using this file.
- *
+ *
* The Original Code and all software distributed under the License are
* distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
* FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
* Please see the License for the specific language governing rights and
* limitations under the License.
- *
+ *
* @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
#ifndef _IOKIT_IOPM_H
#include <IOKit/IOMessage.h>
#include <IOKit/IOReturn.h>
-#ifdef __ppc__
-#include <IOKit/pwr_mgt/IOPMDeprecated.h>
-#endif
-
/*! @header IOPM.h
- @abstract Defines power management constants and keys used by both in-kernel and user space power management.
- @discussion IOPM.h defines a range of power management constants used in several in-kernel and user space APIs. Most significantly, the IOPMPowerFlags used to specify the fields of an IOPMPowerState struct are defined here.
-
- Most of the constants defined in IOPM.h are deprecated or for Apple internal use only, and are not elaborated on in headerdoc.
-*/
+ * @abstract Defines power management constants and keys used by both in-kernel and user space power management.
+ * @discussion IOPM.h defines a range of power management constants used in several in-kernel and user space APIs. Most significantly, the IOPMPowerFlags used to specify the fields of an IOPMPowerState struct are defined here.
+ *
+ * Most of the constants defined in IOPM.h are deprecated or for Apple internal use only, and are not elaborated on in headerdoc.
+ */
enum {
- kIOPMMaxPowerStates = 10,
- IOPMMaxPowerStates = kIOPMMaxPowerStates
+ kIOPMMaxPowerStates = 10,
+ IOPMMaxPowerStates = kIOPMMaxPowerStates
};
/*! @enum IOPMPowerFlags
- @abstract Bits are used in defining capabilityFlags, inputPowerRequirements, and outputPowerCharacter in the IOPMPowerState structure.
- @discussion These bits may be bitwise-OR'd together in the IOPMPowerState capabilityFlags field, the outputPowerCharacter field, and/or the inputPowerRequirement field.
-
- The comments clearly mark whether each flag should be used in the capabilityFlags field, outputPowerCharacter field, and inputPowerRequirement field, or all three.
-
- The value of capabilityFlags, inputPowerRequirement or outputPowerCharacter may be 0. Most drivers implement their 'OFF' state, used when asleep, by defininf each of the 3 fields as 0.
-
- The bits listed below are only the most common bits used to define a device's power states. Your device's IO family may require that your device specify other input or output power flags to interact properly. Consult family-specific documentation to determine if your IOPower plane parents or children require other power flags; they probably don't.
-
- @constant kIOPMPowerOn Indicates the device is on, requires power, and provides power. Useful as a: Capability, InputPowerRequirement, OutputPowerCharacter
-
- @constant kIOPMDeviceUsable Indicates the device is usable in this state. Useful only as a Capability
-
- @constant kIOPMLowPower
- Indicates device is in a low power state. May be bitwis-OR'd together
- with kIOPMDeviceUsable flag, to indicate the device is still usable.
-
- A device with a capability of kIOPMLowPower may:
- Require either 0 or kIOPMPowerOn from its power parent
- Offer either kIOPMLowPower, kIOPMPowerOn, or 0 (no power at all)
- to its power plane children.
-
- Useful only as a Capability, although USB drivers should consult USB family documentation for other valid circumstances to use the kIOPMLowPower bit.
-
- @constant kIOPMPreventIdleSleep
- In the capability field of a power state, disallows idle system sleep while the device is in that state.
-
- For example, displays and disks set this capability for their ON power state; since the system may not idle sleep while the display (and thus keyboard or mouse) or the disk is active.
-
- Useful only as a Capability.
-
- @constant kIOPMSleepCapability
- Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
-
- @constant kIOPMRestartCapability
- Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
-
- @constant kIOPMSleep
- Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
-
- @constant kIOPMRestart
- Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
-*/
+ * @abstract Bits are used in defining capabilityFlags, inputPowerRequirements, and outputPowerCharacter in the IOPMPowerState structure.
+ * @discussion These bits may be bitwise-OR'd together in the IOPMPowerState capabilityFlags field, the outputPowerCharacter field, and/or the inputPowerRequirement field.
+ *
+ * The comments clearly mark whether each flag should be used in the capabilityFlags field, outputPowerCharacter field, and inputPowerRequirement field, or all three.
+ *
+ * The value of capabilityFlags, inputPowerRequirement or outputPowerCharacter may be 0. Most drivers implement their 'OFF' state, used when asleep, by defininf each of the 3 fields as 0.
+ *
+ * The bits listed below are only the most common bits used to define a device's power states. Your device's IO family may require that your device specify other input or output power flags to interact properly. Consult family-specific documentation to determine if your IOPower plane parents or children require other power flags; they probably don't.
+ *
+ * @constant kIOPMPowerOn Indicates the device is on, requires power, and provides power. Useful as a: Capability, InputPowerRequirement, OutputPowerCharacter
+ *
+ * @constant kIOPMDeviceUsable Indicates the device is usable in this state. Useful only as a Capability
+ *
+ * @constant kIOPMLowPower
+ * Indicates device is in a low power state. May be bitwis-OR'd together
+ * with kIOPMDeviceUsable flag, to indicate the device is still usable.
+ *
+ * A device with a capability of kIOPMLowPower may:
+ * Require either 0 or kIOPMPowerOn from its power parent
+ * Offer either kIOPMLowPower, kIOPMPowerOn, or 0 (no power at all)
+ * to its power plane children.
+ *
+ * Useful only as a Capability, although USB drivers should consult USB family documentation for other valid circumstances to use the kIOPMLowPower bit.
+ *
+ * @constant kIOPMPreventIdleSleep
+ * In the capability field of a power state, disallows idle system sleep while the device is in that state.
+ *
+ * For example, displays and disks set this capability for their ON power state; since the system may not idle sleep while the display (and thus keyboard or mouse) or the disk is active.
+ *
+ * Useful only as a Capability.
+ *
+ * @constant kIOPMSleepCapability
+ * Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
+ *
+ * @constant kIOPMRestartCapability
+ * Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
+ *
+ * @constant kIOPMSleep
+ * Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
+ *
+ * @constant kIOPMRestart
+ * Used only by certain IOKit Families (USB). Not defined or used by generic Power Management. Read your family documentation to see if you should define a powerstate using these capabilities.
+ *
+ * @constant kIOPMInitialDeviceState
+ * Indicates the initial power state for the device. If <code>initialPowerStateForDomainState()</code> returns a power state with this flag set in the capability field, then the initial power change is performed without calling the driver's <code>setPowerState()</code>.
+ *
+ * @constant kIOPMRootDomainState
+ * An indication that the power flags represent the state of the root power
+ * domain. This bit must not be set in the IOPMPowerState structure.
+ * Power Management may pass this bit to initialPowerStateForDomainState()
+ * to map from a global system state to the desired device state.
+ */
typedef unsigned long IOPMPowerFlags;
enum {
- kIOPMPowerOn = 0x00000002,
- kIOPMDeviceUsable = 0x00008000,
- kIOPMLowPower = 0x00010000,
- kIOPMPreventIdleSleep = 0x00000040,
- kIOPMSleepCapability = 0x00000004,
- kIOPMRestartCapability = 0x00000080,
- kIOPMSleep = 0x00000001,
- kIOPMRestart = 0x00000080
+ kIOPMPowerOn = 0x00000002,
+ kIOPMDeviceUsable = 0x00008000,
+ kIOPMLowPower = 0x00010000,
+#if PRIVATE
+ kIOPMAOTPower = 0x00020000,
+ kIOPMAOTCapability = kIOPMAOTPower,
+#endif /* PRIVATE */
+ kIOPMPreventIdleSleep = 0x00000040,
+ kIOPMSleepCapability = 0x00000004,
+ kIOPMRestartCapability = 0x00000080,
+ kIOPMSleep = 0x00000001,
+ kIOPMRestart = 0x00000080,
+ kIOPMInitialDeviceState = 0x00000100,
+ kIOPMRootDomainState = 0x00000200
};
/*
* Their behavior is undefined
*/
enum {
- kIOPMClockNormal = 0x0004,
- kIOPMClockRunning = 0x0008,
- kIOPMPreventSystemSleep = 0x0010,
- kIOPMDoze = 0x0400,
- kIOPMChildClamp = 0x0080,
- kIOPMChildClamp2 = 0x0200,
- kIOPMNotPowerManaged = 0x0800
+ kIOPMClockNormal = 0x0004,
+ kIOPMClockRunning = 0x0008,
+ kIOPMPreventSystemSleep = 0x0010,
+ kIOPMDoze = 0x0400,
+ kIOPMChildClamp = 0x0080,
+ kIOPMChildClamp2 = 0x0200,
+ kIOPMNotPowerManaged = 0x0800
};
-
/*
* Deprecated IOPMPowerFlags
* Their behavior is undefined when used in IOPMPowerState
* Capability, InputPowerRequirement, or OutputPowerCharacter fields.
*/
enum {
- kIOPMMaxPerformance = 0x4000,
- kIOPMPassThrough = 0x0100,
- kIOPMAuxPowerOn = 0x0020,
- kIOPMNotAttainable = 0x0001,
- kIOPMContextRetained = 0x2000,
- kIOPMConfigRetained = 0x1000,
- kIOPMStaticPowerValid = 0x0800,
- kIOPMSoftSleep = 0x0400,
- kIOPMCapabilitiesMask = kIOPMPowerOn | kIOPMDeviceUsable |
- kIOPMMaxPerformance | kIOPMContextRetained |
- kIOPMConfigRetained | kIOPMSleepCapability |
- kIOPMRestartCapability
+ kIOPMMaxPerformance = 0x4000,
+ kIOPMPassThrough = 0x0100,
+ kIOPMAuxPowerOn = 0x0020,
+ kIOPMNotAttainable = 0x0001,
+ kIOPMContextRetained = 0x2000,
+ kIOPMConfigRetained = 0x1000,
+ kIOPMStaticPowerValid = 0x0800,
+ kIOPMSoftSleep = 0x0400,
+ kIOPMCapabilitiesMask = kIOPMPowerOn | kIOPMDeviceUsable |
+ kIOPMMaxPerformance | kIOPMContextRetained |
+ kIOPMConfigRetained | kIOPMSleepCapability |
+ kIOPMRestartCapability
};
/*
* Support for old names of IOPMPowerFlag constants
*/
enum {
- IOPMNotAttainable = kIOPMNotAttainable,
- IOPMPowerOn = kIOPMPowerOn,
- IOPMClockNormal = kIOPMClockNormal,
- IOPMClockRunning = kIOPMClockRunning,
- IOPMAuxPowerOn = kIOPMAuxPowerOn,
- IOPMDeviceUsable = kIOPMDeviceUsable,
- IOPMMaxPerformance = kIOPMMaxPerformance,
- IOPMContextRetained = kIOPMContextRetained,
- IOPMConfigRetained = kIOPMConfigRetained,
- IOPMNotPowerManaged = kIOPMNotPowerManaged,
- IOPMSoftSleep = kIOPMSoftSleep
+ IOPMNotAttainable = kIOPMNotAttainable,
+ IOPMPowerOn = kIOPMPowerOn,
+ IOPMClockNormal = kIOPMClockNormal,
+ IOPMClockRunning = kIOPMClockRunning,
+ IOPMAuxPowerOn = kIOPMAuxPowerOn,
+ IOPMDeviceUsable = kIOPMDeviceUsable,
+ IOPMMaxPerformance = kIOPMMaxPerformance,
+ IOPMContextRetained = kIOPMContextRetained,
+ IOPMConfigRetained = kIOPMConfigRetained,
+ IOPMNotPowerManaged = kIOPMNotPowerManaged,
+ IOPMSoftSleep = kIOPMSoftSleep
};
enum {
- kIOPMNextHigherState = 1,
- kIOPMHighestState = 2,
- kIOPMNextLowerState = 3,
- kIOPMLowestState = 4
+ kIOPMNextHigherState = 1,
+ kIOPMHighestState = 2,
+ kIOPMNextLowerState = 3,
+ kIOPMLowestState = 4
};
enum {
- IOPMNextHigherState = kIOPMNextHigherState,
- IOPMHighestState = kIOPMHighestState,
- IOPMNextLowerState = kIOPMNextLowerState,
- IOPMLowestState = kIOPMLowestState
+ IOPMNextHigherState = kIOPMNextHigherState,
+ IOPMHighestState = kIOPMHighestState,
+ IOPMNextLowerState = kIOPMNextLowerState,
+ IOPMLowestState = kIOPMLowestState
};
// Internal commands used by power managment command queue
enum {
- kIOPMBroadcastAggressiveness = 1,
- kIOPMUnidleDevice
+ kIOPMBroadcastAggressiveness = 1,
+ kIOPMUnidleDevice
};
// Power consumption unknown value
enum {
- kIOPMUnknown = 0xFFFF
+ kIOPMUnknown = 0xFFFF
};
/*******************************************************************************
*
******************************************************************************/
-/* AppleClamshellState
+/* AppleClamshellState
* reflects the state of the clamshell (lid) on a portable.
* It has a boolean value.
* true == clamshell is closed
*/
#define kAppleClamshellStateKey "AppleClamshellState"
-/* AppleClamshellCausesSleep
- * reflects the clamshell close behavior on a portable.
+/* AppleClamshellCausesSleep
+ * reflects the clamshell close behavior on a portable.
* It has a boolean value.
* true == system will sleep when clamshell is closed
- * false == system will not sleep on clamshell close
+ * false == system will not sleep on clamshell close
* (typically external display mode)
* not present == no clamshell on this hardware
*/
#define kAppleClamshellCausesSleepKey "AppleClamshellCausesSleep"
+/* kIOPMSleepWakeUUIDKey
+ * Key refers to a CFStringRef that will uniquely identify
+ * a sleep/wake cycle for logging & tracking.
+ * The key becomes valid at the beginning of a sleep cycle - before we
+ * initiate any sleep/wake notifications.
+ * The key becomes invalid at the completion of a system wakeup. The
+ * property will not be present in the IOPMrootDomain's registry entry
+ * when it is invalid.
+ *
+ * See IOPMrootDomain notification kIOPMMessageSleepWakeUUIDChange
+ */
+ #define kIOPMSleepWakeUUIDKey "SleepWakeUUID"
+
+/* kIOPMBootSessionUUIDKey
+ * Key refers to a CFStringRef that will uniquely identify
+ * a boot cycle.
+ * The key becomes valid at boot time and remains valid
+ * till shutdown. The property value will remain same across
+ * sleep/wake/hibernate cycle.
+ */
+#define kIOPMBootSessionUUIDKey "BootSessionUUID"
+
+/* kIOPMDeepSleepEnabledKey
+ * Indicates the Deep Sleep enable state.
+ * It has a boolean value.
+ * true == Deep Sleep is enabled
+ * false == Deep Sleep is disabled
+ * not present == Deep Sleep is not supported on this hardware
+ */
+#define kIOPMDeepSleepEnabledKey "Standby Enabled"
+
+/* kIOPMDeepSleepDelayKey
+ * Key refers to a CFNumberRef that represents the delay in seconds before
+ * entering Deep Sleep state when on battery power and when remaining
+ * battery capacity is below a particular threshold (e.g., 50%.) The
+ * property is not present if Deep Sleep is unsupported.
+ */
+#define kIOPMDeepSleepDelayKey "Standby Delay"
+
+/* kIOPMDeepSleepDelayHighKey
+ * Key refers to a CFNumberRef that represents the delay in seconds before
+ * entering Deep Sleep state. This is used instead of the value specified by
+ * kIOPMDeepSleepDelayKey if the remaining battery capacity is above a
+ * particular threshold (e.g. 50%) or on AC power. The property is not
+ * present if Deep Sleep is unsupported.
+ */
+#define kIOPMDeepSleepDelayHighKey "High Standby Delay"
+
+/* kIOPMLowBatteryThresholdKey
+ * Key refers to a CFNumberRef that represents the threshold used to choose
+ * between the normal deep sleep delay and the high deep sleep delay (as a
+ * percentage of total battery capacity remaining.) The property is not
+ * present if Deep Sleep is unsupported.
+ */
+#define kIOPMStandbyBatteryThresholdKey "Standby Battery Threshold"
+
+/* kIOPMDestroyFVKeyOnStandbyKey
+ * Specifies if FileVault key can be stored when going to standby mode
+ * It has a boolean value,
+ * true == Destroy FV key when going to standby mode
+ * false == Retain FV key when going to standby mode
+ * not present == Retain FV key when going to standby mode
+ */
+#define kIOPMDestroyFVKeyOnStandbyKey "DestroyFVKeyOnStandby"
+
+/*******************************************************************************
+ *
+ * Properties that can control power management behavior
+ *
+ ******************************************************************************/
+
+/* kIOPMResetPowerStateOnWakeKey
+ * If an IOService publishes this key with the value of kOSBooleanTrue,
+ * then PM will disregard the influence from changePowerStateToPriv() or
+ * any activity tickles that occurred before system sleep when resolving
+ * the initial device power state on wake. Influences from power children
+ * and changePowerStateTo() are not eliminated. At the earliest opportunity
+ * upon system wake, PM will query the driver for a new power state to be
+ * installed as the initial changePowerStateToPriv() influence, by calling
+ * initialPowerStateForDomainState() with both kIOPMRootDomainState and
+ * kIOPMPowerOn flags set. The default implementation will always return
+ * the lowest power state. Drivers can override this default behavior to
+ * immediately raise the power state when there are work blocked on the
+ * power change, and cannot afford to wait until the next activity tickle.
+ * This property should be statically added to a driver's plist or set at
+ * runtime before calling PMinit().
+ */
+#define kIOPMResetPowerStateOnWakeKey "IOPMResetPowerStateOnWake"
+
+/*******************************************************************************
+ *
+ * Driver PM Assertions
+ *
+ ******************************************************************************/
+
+/* Driver Assertion bitfield description
+ * Driver PM assertions are defined by these bits.
+ */
+enum {
+ /*! kIOPMDriverAssertionCPUBit
+ * When set, PM kernel will prefer to leave the CPU and core hardware
+ * running in "Dark Wake" state, instead of sleeping.
+ */
+ kIOPMDriverAssertionCPUBit = 0x01,
+
+ /*! kIOPMDriverAssertionPreventSystemIdleSleepBit
+ * When set, the system should not idle sleep. This does not prevent
+ * demand sleep.
+ */
+ kIOPMDriverAssertionPreventSystemIdleSleepBit = 0x02,
+
+ /*! kIOPMDriverAssertionUSBExternalDeviceBit
+ * When set, driver is informing PM that an external USB device is attached.
+ */
+ kIOPMDriverAssertionUSBExternalDeviceBit = 0x04,
+
+ /*! kIOPMDriverAssertionBluetoothHIDDevicePairedBit
+ * When set, driver is informing PM that a Bluetooth HID device is paired.
+ */
+ kIOPMDriverAssertionBluetoothHIDDevicePairedBit = 0x08,
+
+ /*! kIOPMDriverAssertionExternalMediaMountedBit
+ * When set, driver is informing PM that an external media is mounted.
+ */
+ kIOPMDriverAssertionExternalMediaMountedBit = 0x10,
+
+ /*! kIOPMDriverAssertionReservedBit5
+ * Reserved for Thunderbolt.
+ */
+ kIOPMDriverAssertionReservedBit5 = 0x20,
+
+ /*! kIOPMDriverAssertionPreventDisplaySleepBit
+ * When set, the display should remain powered on while the system's awake.
+ */
+ kIOPMDriverAssertionPreventDisplaySleepBit = 0x40,
+
+ /*! kIOPMDriverAssertionReservedBit7
+ * Reserved for storage family.
+ */
+ kIOPMDriverAssertionReservedBit7 = 0x80,
+
+ /*! kIOPMDriverAssertionMagicPacketWakeEnabledBit
+ * When set, driver is informing PM that magic packet wake is enabled.
+ */
+ kIOPMDriverAssertionMagicPacketWakeEnabledBit = 0x100,
+
+ /*! kIOPMDriverAssertionNetworkKeepAliveActiveBit
+ * When set, driver is informing PM that it is holding the network
+ * interface up to do TCPKeepAlive
+ */
+ kIOPMDriverAssertionNetworkKeepAliveActiveBit = 0x200
+};
+
+/* kIOPMAssertionsDriverKey
+ * This kIOPMrootDomain key refers to a CFNumberRef property, containing
+ * a bitfield describing the aggregate PM assertion levels.
+ * Example: A value of 0 indicates that no driver has asserted anything.
+ * Or, a value of <link>kIOPMDriverAssertionCPUBit</link>
+ * indicates that a driver (or drivers) have asserted a need for CPU and video.
+ */
+#define kIOPMAssertionsDriverKey "DriverPMAssertions"
+
+/* kIOPMAssertionsDriverKey
+ * This kIOPMrootDomain key refers to a CFNumberRef property, containing
+ * a bitfield describing the aggregate PM assertion levels.
+ * Example: A value of 0 indicates that no driver has asserted anything.
+ * Or, a value of <link>kIOPMDriverAssertionCPUBit</link>
+ * indicates that a driver (or drivers) have asserted a need for CPU and video.
+ */
+#define kIOPMAssertionsDriverDetailedKey "DriverPMAssertionsDetailed"
+
+/*******************************************************************************
+ *
+ * Kernel Driver assertion detailed dictionary keys
+ *
+ * Keys decode the Array & dictionary data structure under IOPMrootDomain property
+ * kIOPMAssertionsDriverKey.
+ *
+ */
+#define kIOPMDriverAssertionIDKey "ID"
+#define kIOPMDriverAssertionCreatedTimeKey "CreatedTime"
+#define kIOPMDriverAssertionModifiedTimeKey "ModifiedTime"
+#define kIOPMDriverAssertionOwnerStringKey "Owner"
+#define kIOPMDriverAssertionOwnerServiceKey "ServicePtr"
+#define kIOPMDriverAssertionRegistryEntryIDKey "RegistryEntryID"
+#define kIOPMDriverAssertionLevelKey "Level"
+#define kIOPMDriverAssertionAssertedKey "Assertions"
+
/*******************************************************************************
*
* Root Domain general interest messages
*
+ * Available by registering for interest type 'gIOGeneralInterest'
+ * on IOPMrootDomain.
+ *
******************************************************************************/
/* kIOPMMessageClamshellStateChange
* the message. Check bits 0 and 1 using kClamshellStateBit & kClamshellSleepBit
*/
enum {
- kClamshellStateBit = (1 << 0),
- kClamshellSleepBit = (1 << 1)
+ kClamshellStateBit = (1 << 0),
+ kClamshellSleepBit = (1 << 1)
};
#define kIOPMMessageClamshellStateChange \
- iokit_family_msg(sub_iokit_powermanagement, 0x100)
+ iokit_family_msg(sub_iokit_powermanagement, 0x100)
/* kIOPMMessageFeatureChange
* Delivered when the set of supported features ("Supported Features" dictionary
* RootDomain passes no argument with this message.
*/
#define kIOPMMessageFeatureChange \
- iokit_family_msg(sub_iokit_powermanagement, 0x110)
+ iokit_family_msg(sub_iokit_powermanagement, 0x110)
/* kIOPMMessageInflowDisableCancelled
- * The battery has drained completely to its "Fully Discharged" state.
- * If a user process has disabled battery inflow for battery
+ * The battery has drained completely to its "Fully Discharged" state.
+ * If a user process has disabled battery inflow for battery
* calibration, we forcibly re-enable Inflow at this point.
* If inflow HAS been forcibly re-enabled, bit 0
* (kInflowForciblyEnabledBit) will be set.
*/
enum {
- kInflowForciblyEnabledBit = (1 << 0)
+ kInflowForciblyEnabledBit = (1 << 0)
};
/* kIOPMMessageInternalBatteryFullyDischarged
- * The battery has drained completely to its "Fully Discharged" state.
+ * The battery has drained completely to its "Fully Discharged" state.
*/
#define kIOPMMessageInternalBatteryFullyDischarged \
- iokit_family_msg(sub_iokit_powermanagement, 0x120)
+ iokit_family_msg(sub_iokit_powermanagement, 0x120)
/* kIOPMMessageSystemPowerEventOccurred
* Some major system thermal property has changed, and interested clients may
* modify their behavior.
*/
#define kIOPMMessageSystemPowerEventOccurred \
- iokit_family_msg(sub_iokit_powermanagement, 0x130)
+ iokit_family_msg(sub_iokit_powermanagement, 0x130)
+
+/* kIOPMMessageSleepWakeUUIDChange
+ * Either a new SleepWakeUUID has been specified at the beginning of a sleep,
+ * or we're removing the existing property upon completion of a wakeup.
+ */
+#define kIOPMMessageSleepWakeUUIDChange \
+ iokit_family_msg(sub_iokit_powermanagement, 0x140)
+
+/* kIOPMMessageSleepWakeUUIDSet
+ * Argument accompanying the kIOPMMessageSleepWakeUUIDChange notification when
+ * a new UUID has been specified.
+ */
+#define kIOPMMessageSleepWakeUUIDSet ((void *)1)
+
+/* kIOPMMessageSleepWakeUUIDCleared
+ * Argument accompanying the kIOPMMessageSleepWakeUUIDChange notification when
+ * the current UUID has been removed.
+ */
+#define kIOPMMessageSleepWakeUUIDCleared ((void *)NULL)
+/*! kIOPMMessageDriverAssertionsChanged
+ * Sent when kernel PM driver assertions have changed.
+ */
+#define kIOPMMessageDriverAssertionsChanged \
+ iokit_family_msg(sub_iokit_powermanagement, 0x150)
+
+/*! kIOPMMessageDarkWakeThermalEmergency
+ * Sent when machine becomes unsustainably warm in DarkWake.
+ * Kernel PM might choose to put the machine back to sleep right after.
+ */
+#define kIOPMMessageDarkWakeThermalEmergency \
+ iokit_family_msg(sub_iokit_powermanagement, 0x160)
/*******************************************************************************
*
* These commands are issued from system drivers only:
* ApplePMU, AppleSMU, IOGraphics, AppleACPIFamily
*
+ * TODO: deprecate kIOPMAllowSleep and kIOPMPreventSleep
******************************************************************************/
enum {
- kIOPMSleepNow = (1<<0), // put machine to sleep now
- kIOPMAllowSleep = (1<<1), // allow idle sleep
- kIOPMPreventSleep = (1<<2), // do not allow idle sleep
- kIOPMPowerButton = (1<<3), // power button was pressed
- kIOPMClamshellClosed = (1<<4), // clamshell was closed
- kIOPMPowerEmergency = (1<<5), // battery dangerously low
- kIOPMDisableClamshell = (1<<6), // do not sleep on clamshell closure
- kIOPMEnableClamshell = (1<<7), // sleep on clamshell closure
- kIOPMProcessorSpeedChange = (1<<8), // change the processor speed
- kIOPMOverTemp = (1<<9), // system dangerously hot
- kIOPMClamshellOpened = (1<<10) // clamshell was opened
+ kIOPMSleepNow = (1 << 0),// put machine to sleep now
+ kIOPMAllowSleep = (1 << 1),// allow idle sleep
+ kIOPMPreventSleep = (1 << 2),// do not allow idle sleep
+ kIOPMPowerButton = (1 << 3),// power button was pressed
+ kIOPMClamshellClosed = (1 << 4),// clamshell was closed
+ kIOPMPowerEmergency = (1 << 5),// battery dangerously low
+ kIOPMDisableClamshell = (1 << 6),// do not sleep on clamshell closure
+ kIOPMEnableClamshell = (1 << 7),// sleep on clamshell closure
+ kIOPMProcessorSpeedChange = (1 << 8),// change the processor speed
+ kIOPMOverTemp = (1 << 9),// system dangerously hot
+ kIOPMClamshellOpened = (1 << 10),// clamshell was opened
+ kIOPMDWOverTemp = (1 << 11),// DarkWake thermal limits exceeded.
+ kIOPMPowerButtonUp = (1 << 12),// Power button up
+ kIOPMProModeEngaged = (1 << 13),// Fans entered 'ProMode'
+ kIOPMProModeDisengaged = (1 << 14) // Fans exited 'ProMode'
};
*
******************************************************************************/
enum {
- kIOPMNoErr = 0,
- // Returned by powerStateWillChange and powerStateDidChange:
- // Immediate acknowledgement of power state change
- kIOPMAckImplied = 0,
- // Acknowledgement of power state change will come later
- kIOPMWillAckLater = 1,
-
- // Returned by requestDomainState:
- // Unrecognized specification parameter
- kIOPMBadSpecification = 4,
- // No power state matches search specification
- kIOPMNoSuchState = 5,
-
- // Device cannot change its power for some reason
- kIOPMCannotRaisePower = 6,
-
- // Returned by changeStateTo:
- // Requested state doesn't exist
- kIOPMParameterError = 7,
- // Device not yet fully hooked into power management
- kIOPMNotYetInitialized = 8,
-
- // And the old constants; deprecated
- IOPMNoErr = kIOPMNoErr,
- IOPMAckImplied = kIOPMAckImplied,
- IOPMWillAckLater = kIOPMWillAckLater,
- IOPMBadSpecification = kIOPMBadSpecification,
- IOPMNoSuchState = kIOPMNoSuchState,
- IOPMCannotRaisePower = kIOPMCannotRaisePower,
- IOPMParameterError = kIOPMParameterError,
- IOPMNotYetInitialized = kIOPMNotYetInitialized
+ kIOPMNoErr = 0,
+
+ // Returned by driver's setPowerState(), powerStateWillChangeTo(),
+ // powerStateDidChangeTo(), or acknowledgeSetPowerState() to
+ // implicitly acknowledge power change upon function return.
+ kIOPMAckImplied = 0,
+
+ // Deprecated
+ kIOPMWillAckLater = 1,
+
+ // Returned by requestPowerDomainState() to indicate
+ // unrecognized specification parameter.
+ kIOPMBadSpecification = 4,
+
+ // Returned by requestPowerDomainState() to indicate
+ // no power state matches search specification.
+ kIOPMNoSuchState = 5,
+
+ // Deprecated
+ kIOPMCannotRaisePower = 6,
+
+ // Deprecated
+ kIOPMParameterError = 7,
+
+ // Returned when power management state is accessed
+ // before driver has called PMinit().
+ kIOPMNotYetInitialized = 8,
+
+ // And the old constants; deprecated
+ IOPMNoErr = kIOPMNoErr,
+ IOPMAckImplied = kIOPMAckImplied,
+ IOPMWillAckLater = kIOPMWillAckLater,
+ IOPMBadSpecification = kIOPMBadSpecification,
+ IOPMNoSuchState = kIOPMNoSuchState,
+ IOPMCannotRaisePower = kIOPMCannotRaisePower,
+ IOPMParameterError = kIOPMParameterError,
+ IOPMNotYetInitialized = kIOPMNotYetInitialized
};
// IOPMPowerSource class descriptive strings
-// Power Source state is published as properties to the IORegistry under these
+// Power Source state is published as properties to the IORegistry under these
// keys.
#define kIOPMPSExternalConnectedKey "ExternalConnected"
#define kIOPMPSExternalChargeCapableKey "ExternalChargeCapable"
#define kIOPMPSLegacyBatteryInfoKey "LegacyBatteryInfo"
#define kIOPMPSBatteryHealthKey "BatteryHealth"
#define kIOPMPSHealthConfidenceKey "HealthConfidence"
-#define kIOPMPSCapacityEstimatedKey "CapacityEstimated"
+#define kIOPMPSCapacityEstimatedKey "CapacityEstimated"
#define kIOPMPSBatteryChargeStatusKey "ChargeStatus"
+#define kIOPMPSBatteryTemperatureKey "Temperature"
+#define kIOPMPSAdapterDetailsKey "AdapterDetails"
+#define kIOPMPSChargerConfigurationKey "ChargerConfiguration"
-// kIOPMBatteryChargeStatusKey may have one of the following values, or may have
+// kIOPMPSBatteryChargeStatusKey may have one of the following values, or may have
// no value. If kIOPMBatteryChargeStatusKey has a NULL value (or no value) associated with it
// then charge is proceeding normally. If one of these battery charge status reasons is listed,
// then the charge may have been interrupted.
#define kIOPMBatteryChargeStatusTooHot "HighTemperature"
#define kIOPMBatteryChargeStatusTooCold "LowTemperature"
+#define kIOPMBatteryChargeStatusTooHotOrCold "HighOrLowTemperature"
#define kIOPMBatteryChargeStatusGradient "BatteryTemperatureGradient"
// Definitions for battery location, in case of multiple batteries.
// A location of 0 is unspecified
// Location is undefined for single battery systems
enum {
- kIOPMPSLocationLeft = 1001,
- kIOPMPSLocationRight = 1002
+ kIOPMPSLocationLeft = 1001,
+ kIOPMPSLocationRight = 1002
};
// Battery quality health types, specified by BatteryHealth and HealthConfidence
// properties in an IOPMPowerSource battery kext.
enum {
- kIOPMUndefinedValue = 0,
- kIOPMPoorValue = 1,
- kIOPMFairValue = 2,
- kIOPMGoodValue = 3
+ kIOPMUndefinedValue = 0,
+ kIOPMPoorValue = 1,
+ kIOPMFairValue = 2,
+ kIOPMGoodValue = 3
+};
+
+// Keys for kIOPMPSAdapterDetailsKey dictionary
+#define kIOPMPSAdapterDetailsIDKey "AdapterID"
+#define kIOPMPSAdapterDetailsWattsKey "Watts"
+#define kIOPMPSAdapterDetailsRevisionKey "AdapterRevision"
+#define kIOPMPSAdapterDetailsSerialNumberKey "SerialNumber"
+#define kIOPMPSAdapterDetailsFamilyKey "FamilyCode"
+#define kIOPMPSAdapterDetailsAmperageKey "Current"
+#define kIOPMPSAdapterDetailsDescriptionKey "Description"
+#define kIOPMPSAdapterDetailsPMUConfigurationKey "PMUConfiguration"
+#define kIOPMPSAdapterDetailsVoltage "Voltage"
+#define kIOPMPSAdapterDetailsSourceIDKey "Source"
+#define kIOPMPSAdapterDetailsErrorFlagsKey "ErrorFlags"
+#define kIOPMPSAdapterDetailsSharedSourceKey "SharedSource"
+#define kIOPMPSAdapterDetailsCloakedKey "CloakedSource"
+
+// values for kIOPSPowerAdapterFamilyKey
+enum {
+ kIOPSFamilyCodeDisconnected = 0,
+ kIOPSFamilyCodeUnsupported = kIOReturnUnsupported,
+ kIOPSFamilyCodeFirewire = iokit_family_err(sub_iokit_firewire, 0),
+ kIOPSFamilyCodeUSBHost = iokit_family_err(sub_iokit_usb, 0),
+ kIOPSFamilyCodeUSBHostSuspended = iokit_family_err(sub_iokit_usb, 1),
+ kIOPSFamilyCodeUSBDevice = iokit_family_err(sub_iokit_usb, 2),
+ kIOPSFamilyCodeUSBAdapter = iokit_family_err(sub_iokit_usb, 3),
+ kIOPSFamilyCodeUSBChargingPortDedicated = iokit_family_err(sub_iokit_usb, 4),
+ kIOPSFamilyCodeUSBChargingPortDownstream = iokit_family_err(sub_iokit_usb, 5),
+ kIOPSFamilyCodeUSBChargingPort = iokit_family_err(sub_iokit_usb, 6),
+ kIOPSFamilyCodeUSBUnknown = iokit_family_err(sub_iokit_usb, 7),
+ kIOPSFamilyCodeUSBCBrick = iokit_family_err(sub_iokit_usb, 8),
+ kIOPSFamilyCodeUSBCTypeC = iokit_family_err(sub_iokit_usb, 9),
+ kIOPSFamilyCodeUSBCPD = iokit_family_err(sub_iokit_usb, 10),
+ kIOPSFamilyCodeAC = iokit_family_err(sub_iokit_pmu, 0),
+ kIOPSFamilyCodeExternal = iokit_family_err(sub_iokit_pmu, 1),
+ kIOPSFamilyCodeExternal2 = iokit_family_err(sub_iokit_pmu, 2),
+ kIOPSFamilyCodeExternal3 = iokit_family_err(sub_iokit_pmu, 3),
+ kIOPSFamilyCodeExternal4 = iokit_family_err(sub_iokit_pmu, 4),
+ kIOPSFamilyCodeExternal5 = iokit_family_err(sub_iokit_pmu, 5),
+};
+
+// values for kIOPMPSAdapterDetailsErrorFlagsKey
+enum {
+ kIOPSAdapterErrorFlagNoErrors = 0,
+ kIOPSAdapterErrorFlagInsufficientAvailablePower = (1 << 1),
+ kIOPSAdapterErrorFlagForeignObjectDetected = (1 << 2),
+ kIOPSAdapterErrorFlagDeviceNeedsToBeRepositioned = (1 << 3),
};
// Battery's time remaining estimate is invalid this long (seconds) after a wake
// the battery is settled.
#define kIOPMPSPostChargeWaitSecondsKey "PostChargeWaitSeconds"
-// Battery must wait this long (seconds) after being completely discharged
+// Battery must wait this long (seconds) after being completely discharged
// before the battery is settled.
#define kIOPMPSPostDishargeWaitSecondsKey "PostDischargeWaitSeconds"
* Or as arguments to IOPMSystemPowerEventOccurred()
* Or to decode the dictionary obtained from IOPMCopyCPUPowerStatus()
* These keys reflect restrictions placed on the CPU by the system
- * to bring the CPU's power consumption within allowable thermal and
+ * to bring the CPU's power consumption within allowable thermal and
* power constraints.
*/
*/
#define kIOPMCPUPowerLimitsKey "CPU_Power_Limits"
-/* kIOPMCPUPowerLimitProcessorSpeedKey defines the speed & voltage limits placed
+/* kIOPMCPUPowerLimitProcessorSpeedKey defines the speed & voltage limits placed
* on the CPU.
* Represented as a percentage (0-100) of maximum CPU speed.
*/
*/
#define kIOPMCPUPowerLimitProcessorCountKey "CPU_Available_CPUs"
-/* kIOPMCPUPowerLimitSchedulerTimeKey represents the percentage (0-100) of CPU time
+/* kIOPMCPUPowerLimitSchedulerTimeKey represents the percentage (0-100) of CPU time
* available. 100% at normal operation. The OS may limit this time for a percentage
* less than 100%.
*/
/* Thermal Level Warning Key
- * Indicates the thermal constraints placed on the system. This value may
+ * Indicates the thermal constraints placed on the system. This value may
* cause clients to action to consume fewer system resources.
* The value associated with this warning is defined by the platform.
*/
#define kIOPMThermalLevelWarningKey "Thermal_Level_Warning"
/* Thermal Warning Level values
- * kIOPMThermalWarningLevelNormal - under normal operating conditions
- * kIOPMThermalWarningLevelDanger - thermal pressure may cause system slowdown
- * kIOPMThermalWarningLevelCrisis - thermal conditions may cause imminent shutdown
+ * kIOPMThermalLevelNormal - under normal operating conditions
+ * kIOPMThermalLevelDanger - thermal pressure may cause system slowdown
+ * kIOPMThermalLevelCritical - thermal conditions may cause imminent shutdown
*
* The platform may define additional thermal levels if necessary.
+ * Platform specific values are defined from 100 and above
*/
enum {
- kIOPMThermalWarningLevelNormal = 0,
- kIOPMThermalWarningLevelDanger = 5,
- kIOPMThermalWarningLevelCrisis = 10
+ kIOPMThermalLevelNormal = 0,
+ kIOPMThermalLevelDanger = 5,
+ kIOPMThermalLevelCritical = 10,
+
+ kIOPMThermalLevelWarning = 100,
+ kIOPMThermalLevelTrap = 110,
+
+ kIOPMThermalLevelUnknown = 255,
};
+#define kIOPMThermalWarningLevelNormal kIOPMThermalLevelNormal
+#define kIOPMThermalWarningLevelDanger kIOPMThermalLevelWarning
+#define kIOPMThermalWarningLevelCrisis kIOPMThermalLevelCritical
// PM Settings Controller setting types
// Settings types used primarily with:
#define kIOPMSettingDisplaySleepUsesDimKey "Display Sleep Uses Dim"
#define kIOPMSettingTimeZoneOffsetKey "TimeZoneOffsetSeconds"
#define kIOPMSettingMobileMotionModuleKey "MobileMotionModule"
+#define kIOPMSettingGraphicsSwitchKey "GPUSwitch"
+#define kIOPMSettingProModeControl "ProModeControl"
+#define kIOPMSettingProModeDefer "ProModeDefer"
// Setting controlling drivers can register to receive scheduled wake data
// Either in "CF seconds" type, or structured calendar data in a formatted
#define kIOPMSettingDebugWakeRelativeKey "WakeRelativeToSleep"
#define kIOPMSettingDebugPowerRelativeKey "PowerRelativeToShutdown"
+// Maintenance wake calendar.
+#define kIOPMSettingMaintenanceWakeCalendarKey "MaintenanceWakeCalendarDate"
+
+
struct IOPMCalendarStruct {
- UInt32 year;
- UInt8 month;
- UInt8 day;
- UInt8 hour;
- UInt8 minute;
- UInt8 second;
+ UInt32 year;
+ UInt8 month;
+ UInt8 day;
+ UInt8 hour;
+ UInt8 minute;
+ UInt8 second;
+ UInt8 selector;
};
typedef struct IOPMCalendarStruct IOPMCalendarStruct;
// SetAggressiveness types
enum {
- kPMGeneralAggressiveness = 0,
- kPMMinutesToDim,
- kPMMinutesToSpinDown,
- kPMMinutesToSleep,
- kPMEthernetWakeOnLANSettings,
- kPMSetProcessorSpeed,
- kPMPowerSource,
- kPMMotionSensor,
- kPMLastAggressivenessType
+ kPMGeneralAggressiveness = 0,
+ kPMMinutesToDim,
+ kPMMinutesToSpinDown,
+ kPMMinutesToSleep,
+ kPMEthernetWakeOnLANSettings,
+ kPMSetProcessorSpeed,
+ kPMPowerSource,
+ kPMMotionSensor,
+ kPMLastAggressivenessType
};
#define kMaxType (kPMLastAggressivenessType-1)
// SetAggressiveness values for the kPMPowerSource aggressiveness type
enum {
- kIOPMInternalPower = 1,
- kIOPMExternalPower
+ kIOPMInternalPower = 1,
+ kIOPMExternalPower
};
#define kIOREMSleepEnabledKey "REMSleepEnabled"
#define kIOBatteryCycleCountKey "Cycle Count"
enum {
- kIOBatteryInstalled = (1 << 2),
- kIOBatteryCharge = (1 << 1),
- kIOBatteryChargerConnect = (1 << 0)
+ kIOBatteryInstalled = (1 << 2),
+ kIOBatteryCharge = (1 << 1),
+ kIOBatteryChargerConnect = (1 << 0)
};
-
// Private power management message indicating battery data has changed
// Indicates new data resides in the IORegistry
#define kIOPMMessageBatteryStatusHasChanged iokit_family_msg(sub_iokit_pmu, 0x100)
// For use with IOPMPowerSource bFlags
#define IOPM_POWER_SOURCE_REV 2
enum {
- kIOPMACInstalled = kIOBatteryChargerConnect,
- kIOPMBatteryCharging = kIOBatteryCharge,
- kIOPMBatteryInstalled = kIOBatteryInstalled,
- kIOPMUPSInstalled = (1<<3),
- kIOPMBatteryAtWarn = (1<<4),
- kIOPMBatteryDepleted = (1<<5),
- kIOPMACnoChargeCapability = (1<<6), // AC adapter cannot charge battery
- kIOPMRawLowBattery = (1<<7), // used only by Platform Expert
- kIOPMForceLowSpeed = (1<<8), // set by Platfm Expert, chk'd by Pwr Plugin
- kIOPMClosedClamshell = (1<<9), // set by PMU - reflects state of the clamshell
- kIOPMClamshellStateOnWake = (1<<10) // used only by Platform Expert
+ kIOPMACInstalled = kIOBatteryChargerConnect,
+ kIOPMBatteryCharging = kIOBatteryCharge,
+ kIOPMBatteryInstalled = kIOBatteryInstalled,
+ kIOPMUPSInstalled = (1 << 3),
+ kIOPMBatteryAtWarn = (1 << 4),
+ kIOPMBatteryDepleted = (1 << 5),
+ kIOPMACnoChargeCapability = (1 << 6), // AC adapter cannot charge battery
+ kIOPMRawLowBattery = (1 << 7), // used only by Platform Expert
+ kIOPMForceLowSpeed = (1 << 8), // set by Platfm Expert, chk'd by Pwr Plugin
+ kIOPMClosedClamshell = (1 << 9), // set by PMU - reflects state of the clamshell
+ kIOPMClamshellStateOnWake = (1 << 10) // used only by Platform Expert
};
-
// **********************************************
// Internal power management data structures
// **********************************************
class IOService;
enum {
- kIOPowerEmergencyLevel = 1000
+ kIOPowerEmergencyLevel = 1000
};
enum {
- kIOPMSubclassPolicy,
- kIOPMSuperclassPolicy1
+ kIOPMSubclassPolicy,
+ kIOPMSuperclassPolicy1
+#ifdef KERNEL_PRIVATE
+ , kIOPMActivityTickleTypeAdvisory = 128
+#endif
};
-struct stateChangeNote{
- IOPMPowerFlags stateFlags;
- unsigned long stateNum;
- void * powerRef;
+struct stateChangeNote {
+ IOPMPowerFlags stateFlags;
+ unsigned long stateNum;
+ void * powerRef;
};
typedef struct stateChangeNote stateChangeNote;
+#endif /* KERNEL && __cplusplus */
struct IOPowerStateChangeNotification {
- void * powerRef;
- unsigned long returnValue;
- unsigned long stateNumber;
- IOPMPowerFlags stateFlags;
+ void * powerRef;
+ unsigned long returnValue;
+ unsigned long stateNumber;
+ IOPMPowerFlags stateFlags;
};
typedef struct IOPowerStateChangeNotification IOPowerStateChangeNotification;
typedef IOPowerStateChangeNotification sleepWakeNote;
-extern void IOPMRegisterDevice(const char *, IOService *);
-#endif /* KERNEL && __cplusplus */
+/*! @struct IOPMSystemCapabilityChangeParameters
+ * @abstract A structure describing a system capability change.
+ * @discussion A system capability change is a system level transition from a set
+ * of system capabilities to a new set of system capabilities. Power management
+ * sends a <code>kIOMessageSystemCapabilityChange</code> message and provides
+ * this structure as the message data (by reference) to
+ * <code>gIOPriorityPowerStateInterest</code> clients when system capability
+ * changes.
+ * @field notifyRef An identifier for this message notification. Clients with pending
+ * I/O can signal completion by calling <code>allowPowerChange()</code> with this
+ * value as the argument. Clients that are able to process the notification
+ * synchronously should ignore this field.
+ * @field maxWaitForReply A return value to the caller indicating the maximum time in
+ * microseconds to wait for the <code>allowPowerChange()</code> call. The default
+ * value is zero, which indicates the client processing has finished, and power
+ * management should not wait for an <code>allowPowerChange()</code> call.
+ * @field changeFlags Flags will be set to indicate whether the notification precedes
+ * the capability change (<code>kIOPMSystemCapabilityWillChange</code>), or after
+ * the capability change has occurred (<code>kIOPMSystemCapabilityDidChange</code>).
+ * @field __reserved1 Set to zero.
+ * @field fromCapabilities The system capabilities at the start of the transition.
+ * @field toCapabilities The system capabilities at the end of the transition.
+ * @field __reserved2 Set to zero.
+ */
+struct IOPMSystemCapabilityChangeParameters {
+ uint32_t notifyRef;
+ uint32_t maxWaitForReply;
+ uint32_t changeFlags;
+ uint32_t __reserved1;
+ uint32_t fromCapabilities;
+ uint32_t toCapabilities;
+ uint32_t __reserved2[4];
+};
-#endif /* ! _IOKIT_IOPM_H */
+/*! @enum IOPMSystemCapabilityChangeFlags
+ * @constant kIOPMSystemCapabilityWillChange Indicates the system capability will change.
+ * @constant kIOPMSystemCapabilityDidChange Indicates the system capability has changed.
+ */
+enum {
+ kIOPMSystemCapabilityWillChange = 0x01,
+ kIOPMSystemCapabilityDidChange = 0x02
+};
+
+enum {
+ kIOPMSystemCapabilityCPU = 0x01,
+ kIOPMSystemCapabilityGraphics = 0x02,
+ kIOPMSystemCapabilityAudio = 0x04,
+ kIOPMSystemCapabilityNetwork = 0x08
+};
+#endif /* ! _IOKIT_IOPM_H */
projects / apple / xnu.git / blobdiff