xnu-7195.101.1.tar.gz

[apple/xnu.git] / config / MASTER

diff --git a/config/MASTER b/config/MASTER
index f0900b345134faa0d5a5c07a07c90b63c66c8e15..8beac4230a07112fcf622debff0028eef60302e3 100644 (file)
--- a/config/MASTER
+++ b/config/MASTER
@@ -84,7 +84,6 @@ options               DUMMYNET        # dummynet support              # <dummynet>
 options                TRAFFIC_MGT     # traffic management support            # <traffic_mgt>
 options                MULTICAST       # Internet Protocol Class-D     $
 options                TCPDEBUG        # TCP debug                     # <tcpdebug>
 options                TRAFFIC_MGT     # traffic management support            # <traffic_mgt>
 options                MULTICAST       # Internet Protocol Class-D     $
 options                TCPDEBUG        # TCP debug                     # <tcpdebug>

-options                TCP_DROP_SYNFIN # Drop TCP packets with SYN+FIN set     # <tcpdrop_synfin>

 options                ICMP_BANDLIM    # ICMP bandwidth limiting sysctl
 options                IFNET_INPUT_SANITY_CHK  # allow dlil/ifnet input sanity check # <ifnet_input_chk>
 options                MULTIPATH       # Multipath domain              # <multipath>
 options                ICMP_BANDLIM    # ICMP bandwidth limiting sysctl
 options                IFNET_INPUT_SANITY_CHK  # allow dlil/ifnet input sanity check # <ifnet_input_chk>
 options                MULTIPATH       # Multipath domain              # <multipath>


@@ -106,11 +105,11 @@ options     OLD_SEMWAIT_SIGNAL  # old semwait_signal handler
 #
 #      4.4 general kernel
 #
 #
 #      4.4 general kernel
 #

-options                SOCKETS         # socket support                # <inet, inet6>
+options                SOCKETS         # socket support                # <inet>

 options        DIAGNOSTIC      # diagnostics                   # <diagnostic>
 options                PROFILE         # kernel profiling              # <profile>
 options                SENDFILE        # sendfile                                      # <sendfile>
 options        DIAGNOSTIC      # diagnostics                   # <diagnostic>
 options                PROFILE         # kernel profiling              # <profile>
 options                SENDFILE        # sendfile                                      # <sendfile>

-options                NETWORKING      # networking layer              # <inet, inet6>
+options                NETWORKING      # networking layer              # <inet>

 options                CONFIG_FSE      # file system events            # <config_fse>
 options                CONFIG_IMAGEBOOT        # local image boot      # <config_imageboot>
 options                CONFIG_LOCKERBOOT       # locker boot   # <config_lockerboot>
 options                CONFIG_FSE      # file system events            # <config_fse>
 options                CONFIG_IMAGEBOOT        # local image boot      # <config_imageboot>
 options                CONFIG_LOCKERBOOT       # locker boot   # <config_lockerboot>


@@ -130,6 +129,7 @@ options             FDESC           # fdesc_fs support              # <fdesc>
 options                DEVFS           # devfs support                 # <devfs>
 options                ROUTEFS         # routefs support               # <routefs>
 options                NULLFS          # nullfs support                # <nullfs>
 options                DEVFS           # devfs support                 # <devfs>
 options                ROUTEFS         # routefs support               # <routefs>
 options                NULLFS          # nullfs support                # <nullfs>

+options                BINDFS          # bindfs support                # <bindfs>

 options                FS_COMPRESSION  # fs compression            # <fs_compression>
 options                CONFIG_DEV_KMEM     # /dev/kmem device for reading KVA  # <config_dev_kmem>
 
 options                FS_COMPRESSION  # fs compression            # <fs_compression>
 options                CONFIG_DEV_KMEM     # /dev/kmem device for reading KVA  # <config_dev_kmem>
 


@@ -149,7 +149,9 @@ options             CONFIG_MNT_ROOTSNAP # allow rooting from snapshot # <config_mnt_rootsna
 options        CONFIG_ROSV_STARTUP # allow read-only system volume startup # <config_rosv_startup>
 options                CONFIG_FIRMLINKS # support "firmlinks" # <config_firmlinks>
 options        CONFIG_MOUNT_VM # mount VM volume on startup # <config_mount_vm>
 options        CONFIG_ROSV_STARTUP # allow read-only system volume startup # <config_rosv_startup>
 options                CONFIG_FIRMLINKS # support "firmlinks" # <config_firmlinks>
 options        CONFIG_MOUNT_VM # mount VM volume on startup # <config_mount_vm>

+options        CONFIG_MOUNT_PREBOOTRECOVERY # mount Preboot and/or Recovery volume on startup # <config_mount_prebootrecovery>

 options                CONFIG_DATALESS_FILES # support dataless file materialization # <config_dataless_files>
 options                CONFIG_DATALESS_FILES # support dataless file materialization # <config_dataless_files>

+options         CONFIG_BASESYSTEMROOT # mount BaseSystem as initial root filesystem on some kinds of startup # <config_basesystemroot>

 
 #
 # NFS support
 
 #
 # NFS support


@@ -168,13 +170,8 @@ profile                            # build a profiling kernel      # <profile>
 #
 # IPv6 Support
 #
 #
 # IPv6 Support
 #

-options         "INET6"         # kernel IPv6 Support           # <inet6>
-options         IPV6SEND       # Secure Neighbor Discovery     # <ipv6send>

 options         IPSEC           # IP security                  # <ipsec>
 options         IPSEC_ESP       # IP security                  # <ipsec>
 options         IPSEC           # IP security                  # <ipsec>
 options         IPSEC_ESP       # IP security                  # <ipsec>

-options         "IPV6FIREWALL"  # IPv6 Firewall Feature        # <ipv6firewall>
-options         "IPV6FIREWALL_DEFAULT_TO_ACCEPT"       #IPv6 Firewall Feature          # <ipv6firewall>
-#options         "IPV6FIREWALL_VERBOSE"                #IPv6 Firewall Feature          # <ipv6firewall>

 
 pseudo-device   gif     1                              # <gif>
 pseudo-device   dummy   2                              # <dummy>
 
 pseudo-device   gif     1                              # <gif>
 pseudo-device   dummy   2                              # <dummy>


@@ -296,10 +293,10 @@ options   CONFIG_MFCTBLSIZ=16                     # <bsmall>
 #
 # configurable kernel message buffer size
 #
 #
 # configurable kernel message buffer size
 #

-options   CONFIG_MSG_BSIZE_REL=4096            # <bsmall,small,xsmall>
-options   CONFIG_MSG_BSIZE_DEV=4096            # <bsmall,small,xsmall>
-options   CONFIG_MSG_BSIZE_REL=16384           # <medium,large,xlarge>
-options   CONFIG_MSG_BSIZE_DEV=131072          # <medium,large,xlarge>
+options   CONFIG_MSG_BSIZE_REL=16384           # <msgb_small>
+options   CONFIG_MSG_BSIZE_DEV=131072          # <msgb_small>
+options   CONFIG_MSG_BSIZE_REL=131072          # <msgb_large>
+options   CONFIG_MSG_BSIZE_DEV=131072          # <msgb_large>

 options   CONFIG_MSG_BSIZE=CONFIG_MSG_BSIZE_REL        # <!development,debug>
 options   CONFIG_MSG_BSIZE=CONFIG_MSG_BSIZE_DEV        # <development,debug>
 
 options   CONFIG_MSG_BSIZE=CONFIG_MSG_BSIZE_REL        # <!development,debug>
 options   CONFIG_MSG_BSIZE=CONFIG_MSG_BSIZE_DEV        # <development,debug>
 


@@ -309,6 +306,12 @@ options   CONFIG_MSG_BSIZE=CONFIG_MSG_BSIZE_DEV    # <development,debug>
 options   CONFIG_IPC_TABLE_ENTRIES_STEPS=64    # 137898 entries        # <bsmall,small,xsmall>
 options   CONFIG_IPC_TABLE_ENTRIES_STEPS=256   # 300714 entries        # <medium,large,xlarge>
 
 options   CONFIG_IPC_TABLE_ENTRIES_STEPS=64    # 137898 entries        # <bsmall,small,xsmall>
 options   CONFIG_IPC_TABLE_ENTRIES_STEPS=256   # 300714 entries        # <medium,large,xlarge>
 

+#
+# maximum copyout size for IPC debugging tools
+#
+options CONFIG_IPC_KERNEL_MAP_SIZE=16  # 16M   # <bsmall,small,xsmall>
+options CONFIG_IPC_KERNEL_MAP_SIZE=64  # 64M   # <medium,large,xlarge>
+

 #
 #  configurable kernel - use these options to strip strings from panic
 #  and printf calls.
 #
 #  configurable kernel - use these options to strip strings from panic
 #  and printf calls.


@@ -317,12 +320,20 @@ options   CONFIG_IPC_TABLE_ENTRIES_STEPS=256      # 300714 entries        # <medium,large,x
 options   CONFIG_NO_PRINTF_STRINGS             # <no_printf_str>
 options   CONFIG_NO_KPRINTF_STRINGS            # <no_kprintf_str>
 
 options   CONFIG_NO_PRINTF_STRINGS             # <no_printf_str>
 options   CONFIG_NO_KPRINTF_STRINGS            # <no_kprintf_str>
 

+# support vsprintf (deprecated in favor of vsnprintf)
+options   CONFIG_VSPRINTF               # <vsprintf>
+

 #
 # configurable kernel - general switch to say we are building for an
 # embedded device
 #
 options   CONFIG_EMBEDDED                      # <config_embedded>
 
 #
 # configurable kernel - general switch to say we are building for an
 # embedded device
 #
 options   CONFIG_EMBEDDED                      # <config_embedded>
 

+options   CONFIG_ARROW              # <config_arrow>
+
+
+options   NOS_ARM_ASM                  # <nos_arm_asm>
+options   NOS_ARM_PMAP                 # <nos_arm_pmap>

 
 # support dynamic signing of code
 #
 
 # support dynamic signing of code
 #


@@ -332,6 +343,14 @@ options            CONFIG_DYNAMIC_CODE_SIGNING     # <dynamic_codesigning>
 #
 options                CONFIG_ENFORCE_LIBRARY_VALIDATION  # <config_library_validation>
 
 #
 options                CONFIG_ENFORCE_LIBRARY_VALIDATION  # <config_library_validation>
 

+# support loading a second static trust cache
+#
+options CONFIG_SECOND_STATIC_TRUST_CACHE # <second_static_trust_cache>
+
+# support supplemental signatures
+#
+options CONFIG_SUPPLEMENTAL_SIGNATURES # <config_supplemental_signatures>
+

 #
 # code decryption... used on embedded for app protection, DSMOS on desktop
 #
 #
 # code decryption... used on embedded for app protection, DSMOS on desktop
 #


@@ -355,6 +374,10 @@ options            CONFIG_VPS_DYNAMIC_PRIO         # <vps_dynamic_prio>
 #
 options                CONFIG_MEMORYSTATUS             # <memorystatus>
 
 #
 options                CONFIG_MEMORYSTATUS             # <memorystatus>
 

+#
+# enable per-process dirty-status tracking
+#
+options                CONFIG_DIRTYSTATUS_TRACKING     # <dirtystatus_tracking>

 #
 # enable jetsam - used on embedded
 #
 #
 # enable jetsam - used on embedded
 #


@@ -380,6 +403,11 @@ options            CONFIG_FREEZE                   # <freeze>
 
 options                CHECK_CS_VALIDATION_BITMAP      # <config_cs_validation_bitmap>
 
 
 options                CHECK_CS_VALIDATION_BITMAP      # <config_cs_validation_bitmap>
 

+#
+# enable physical writes accounting
+#
+options                CONFIG_PHYS_WRITE_ACCT          # <phys_write_acct>
+

 #
 # enable detectiion of file cache thrashing - used on platforms with
 # dynamic VM compression enabled
 #
 # enable detectiion of file cache thrashing - used on platforms with
 # dynamic VM compression enabled


@@ -440,11 +468,11 @@ options           CONFIG_VNGUARD                  # <config_vnguard>
 #
 #  Ethernet (ARP)
 #
 #
 #  Ethernet (ARP)
 #

-pseudo-device  ether                           # <networking,inet,inet6>
+pseudo-device  ether                           # <networking,inet>

 #
 #  Network loopback device
 #
 #
 #  Network loopback device
 #

-pseudo-device  loop                            # <networking,inet,inet6>
+pseudo-device  loop                            # <networking,inet>

 #
 #  UCB pseudo terminal service
 #
 #
 #  UCB pseudo terminal service
 #


@@ -472,7 +500,7 @@ pseudo-device       mdevdevice      1       init    mdevinit
 #
 # packet filter device
 #
 #
 # packet filter device
 #

-pseudo-device  bpfilter        4       init    bpf_init                # <networking,inet,inet6>
+pseudo-device  bpfilter        4       init    bpf_init                # <networking,inet>

 
 #
 # fsevents device
 
 #
 # fsevents device


@@ -498,7 +526,7 @@ options             IOKITCPP        # C++ implementation    # <iokitcpp>
 options                IOKITSTATS      # IOKit statistics      # <iokitstats>
 options                IOTRACKING      # IOKit tracking        # <iotracking>
 options                CONFIG_SLEEP    #                       # <config_sleep>
 options                IOKITSTATS      # IOKit statistics      # <iokitstats>
 options                IOTRACKING      # IOKit tracking        # <iotracking>
 options                CONFIG_SLEEP    #                       # <config_sleep>

-options   CONFIG_MAX_THREADS=64        # IOConfigThread threads
+options                CONFIG_MAX_THREADS=500  # IOConfigThread threads

 options         NO_KEXTD                               # <no_kextd>
 options         NO_KERNEL_HID                          # <no_kernel_hid>
 
 options         NO_KEXTD                               # <no_kextd>
 options         NO_KERNEL_HID                          # <no_kernel_hid>
 


@@ -536,22 +564,21 @@ options           PERSONA_DEBUG       # Persona debugging     # <persona_debug>
 
 options                CONFIG_MACF     # Mandatory Access Control Framework    # <config_macf>
 options                CONFIG_MACF_SOCKET_SUBSET       # MAC socket subest (no labels) # <config_macf>
 
 options                CONFIG_MACF     # Mandatory Access Control Framework    # <config_macf>
 options                CONFIG_MACF_SOCKET_SUBSET       # MAC socket subest (no labels) # <config_macf>

-#options       CONFIG_MACF_SOCKET  # MAC socket labels     # <config_macf>
-#options       CONFIG_MACF_NET     # mbuf                  # <config_macf>

 #options       CONFIG_MACF_DEBUG   # debug                 # <config_macf>
 
 options                CONFIG_AUDIT        # Kernel auditing       # <config_audit>
 
 options                CONFIG_ARCADE           # Arcade validation support     # <config_arcade>
 
 #options       CONFIG_MACF_DEBUG   # debug                 # <config_macf>
 
 options                CONFIG_AUDIT        # Kernel auditing       # <config_audit>
 
 options                CONFIG_ARCADE           # Arcade validation support     # <config_arcade>
 

+options                CONFIG_SETUID           # setuid/setgid support # <config_setuid>
+
+options                CONFIG_SECURE_BSD_ROOT  # secure BSD root       # <config_secure_bsd_root>
+
+options                CONFIG_KAS_INFO         # kas_info support      # <config_kas_info>
+

 #
 # MACH configuration options.
 #
 #
 # MACH configuration options.
 #

-# TASK_SWAPPER enables code that manages demand for physical memory by
-#      forcibly suspending tasks when the demand exceeds supply. This
-#      option should be on.
-#
-options                TASK_SWAPPER    #       <task_swapper_disabled>

 
 #
 # This defines configuration options that are normally used only during
 
 #
 # This defines configuration options that are normally used only during


@@ -581,12 +608,6 @@ options            MACH_VM_DEBUG   #                               # <debug>
 #      hardclock device driver.
 #
 options                MACH_MP_DEBUG   #                               # <debug>
 #      hardclock device driver.
 #
 options                MACH_MP_DEBUG   #                               # <debug>

-#
-# ZONE_DEBUG keeps track of all zalloc()ed elements to perform further
-#      operations on each element.
-#
-options                ZONE_DEBUG      #               # <debug>
-options                CONFIG_ZCACHE   #Enable per-cpu caching for zones       # <config_zcache>

 options                CONFIG_ZLEAKS   # Live zone leak debugging      # <zleaks>
 
 #
 options                CONFIG_ZLEAKS   # Live zone leak debugging      # <zleaks>
 
 #


@@ -629,10 +650,6 @@ options     KPC                    # <kpc>
 
 options     PGO                    # <pgo>
 
 
 options     PGO                    # <pgo>
 

-# MACH_COUNTERS enables code that handles various counters in the system.
-#
-options                MACH_COUNTERS   #                           # <debug>
-

 # DEVELOPMENT define for development builds
 options                DEVELOPMENT     # dev kernel                # <development>
 
 # DEVELOPMENT define for development builds
 options                DEVELOPMENT     # dev kernel                # <development>
 


@@ -699,6 +716,7 @@ options             CONFIG_SCHED_GRRR_CORE          # <config_sched_grrr>
 options                CONFIG_SCHED_MULTIQ             # <config_sched_multiq>
 options                CONFIG_SCHED_TIMESHARE_CORE     # <config_sched_traditional,config_sched_multiq>
 options                CONFIG_CLUTCH                   # <config_clutch>
 options                CONFIG_SCHED_MULTIQ             # <config_sched_multiq>
 options                CONFIG_SCHED_TIMESHARE_CORE     # <config_sched_traditional,config_sched_multiq>
 options                CONFIG_CLUTCH                   # <config_clutch>

+options        CONFIG_SCHED_AUTO_JOIN          # <config_sched_auto_join>

 
 options                CONFIG_SCHED_IDLE_IN_PLACE      # <config_sched_idle_in_place>
 options                CONFIG_SCHED_SFI                # <config_sched_sfi>
 
 options                CONFIG_SCHED_IDLE_IN_PLACE      # <config_sched_idle_in_place>
 options                CONFIG_SCHED_SFI                # <config_sched_sfi>


@@ -719,6 +737,8 @@ options             MACH_KDP            # KDP               # <mach_kdp>
 options                CONFIG_SERIAL_KDP   # KDP over serial   # <config_serial_kdp>
 options                CONFIG_KDP_INTERACTIVE_DEBUGGING        # <kdp_interactive_debugging>
 
 options                CONFIG_SERIAL_KDP   # KDP over serial   # <config_serial_kdp>
 options                CONFIG_KDP_INTERACTIVE_DEBUGGING        # <kdp_interactive_debugging>
 

+options        CONFIG_TASKWATCH
+options        CONFIG_USER_NOTIFICATION                # <config_user_notification>

 #
 # Kernel Power On Self Tests
 #
 #
 # Kernel Power On Self Tests
 #


@@ -729,11 +749,6 @@ options            CONFIG_XNUPOST                          # <config_xnupost>
 #
 options PROC_REF_DEBUG                                 # <proc_ref_debug>
 
 #
 options PROC_REF_DEBUG                                 # <proc_ref_debug>
 

-#
-# Kernel OS reason debug instrumentation
-#
-options OS_REASON_DEBUG                                        # <os_reason_debug>
-

 #
 # Kernel Voucher Attr Manager for Activity Trace
 #
 #
 # Kernel Voucher Attr Manager for Activity Trace
 #


@@ -747,6 +762,10 @@ options            CONFIG_SYSDIAGNOSE                      # <config_sysdiagnose>
 
 # Configurable Security Restrictions
 options                CONFIG_CSR                              # <config_csr>
 
 # Configurable Security Restrictions
 options                CONFIG_CSR                              # <config_csr>

+options                CONFIG_CSR_FROM_DT              # <config_csr_from_dt>
+
+# Enable collection of IO Compression statistics
+options                CONFIG_IO_COMPRESSION_STATS             # <config_io_compression_stats>

 
 #
 # Console options
 
 #
 # Console options


@@ -776,6 +795,7 @@ options             CONFIG_MACH_BRIDGE_RECV_TIME #  # <config_mach_bridge_recv_time>
 options                CONFIG_32BIT_TELEMETRY # # <config_32bit_telemetry>
 
 options                CONFIG_QUIESCE_COUNTER # Support for _COMM_PAGE_CPU_QUIESCENT_COUNTER # <config_quiesce_counter>
 options                CONFIG_32BIT_TELEMETRY # # <config_32bit_telemetry>
 
 options                CONFIG_QUIESCE_COUNTER # Support for _COMM_PAGE_CPU_QUIESCENT_COUNTER # <config_quiesce_counter>

+options                CONFIG_ARM_PFZ  # Support for PFZ on ARM # <config_arm_pfz>

 
 #
 # Sanitizers
 
 #
 # Sanitizers


@@ -784,4 +804,17 @@ options            CONFIG_KASAN            # <config_kasan>
 options                CONFIG_UBSAN            # <config_ubsan>
 options                CONFIG_KSANCOV          # <config_ksancov>
 
 options                CONFIG_UBSAN            # <config_ubsan>
 options                CONFIG_KSANCOV          # <config_ksancov>
 

+# dark boot support
+options                CONFIG_DARKBOOT         # <config_darkboot>
+
+# support for processes delaying idle sleep for pending IO
+options                CONFIG_DELAY_IDLE_SLEEP # <config_delay_idle_sleep>
+
+# support for storing a 64-bit user supplied value in the proc structure
+options                CONFIG_PROC_UDATA_STORAGE # <config_proc_udata_storage>
+

 pseudo-device ksancov 1 init ksancov_init_dev # <config_ksancov>
 pseudo-device ksancov 1 init ksancov_init_dev # <config_ksancov>

+
+# debug instrumentation to catch code that leaves interrupts masked
+# for an excessive period of time
+options   INTERRUPT_MASKED_DEBUG # <interrupt_masked_debug>