- vm_page_unlock_queues();
- wpipe->pipe_map.npages = 0;
-}
-
-/*
- * In the case of a signal, the writing process might go away. This
- * code copies the data into the circular buffer so that the source
- * pages can be freed without loss of data.
- */
-static void
-pipe_clone_write_buffer(wpipe)
- struct pipe *wpipe;
-{
- int size;
- int pos;
-
- size = wpipe->pipe_map.cnt;
- pos = wpipe->pipe_map.pos;
-
- wpipe->pipe_buffer.in = size;
- wpipe->pipe_buffer.out = 0;
- wpipe->pipe_buffer.cnt = size;
- wpipe->pipe_state &= ~PIPE_DIRECTW;
-
- PIPE_UNLOCK(wpipe);
- bcopy((caddr_t) wpipe->pipe_map.kva + pos,
- wpipe->pipe_buffer.buffer, size);
- pipe_destroy_write_buffer(wpipe);
- PIPE_LOCK(wpipe);
-}
-
-/*
- * This implements the pipe buffer write mechanism. Note that only
- * a direct write OR a normal pipe write can be pending at any given time.
- * If there are any characters in the pipe buffer, the direct write will
- * be deferred until the receiving process grabs all of the bytes from
- * the pipe buffer. Then the direct mapping write is set-up.
- */
-static int
-pipe_direct_write(wpipe, uio)
- struct pipe *wpipe;
- struct uio *uio;
-{
- int error;
-
-retry:
- while (wpipe->pipe_state & PIPE_DIRECTW) {
- if (wpipe->pipe_state & PIPE_WANTR) {
- wpipe->pipe_state &= ~PIPE_WANTR;
- wakeup(wpipe);
- }
- wpipe->pipe_state |= PIPE_WANTW;
- error = msleep(wpipe, PIPE_MTX(wpipe),
- PRIBIO | PCATCH, "pipdww", 0);
- if (error)
- goto error1;
- if (wpipe->pipe_state & PIPE_EOF) {
- error = EPIPE;
- goto error1;
- }
- }
- wpipe->pipe_map.cnt = 0; /* transfer not ready yet */
- if (wpipe->pipe_buffer.cnt > 0) {
- if (wpipe->pipe_state & PIPE_WANTR) {
- wpipe->pipe_state &= ~PIPE_WANTR;
- wakeup(wpipe);
- }
-
- wpipe->pipe_state |= PIPE_WANTW;
- error = msleep(wpipe, PIPE_MTX(wpipe),
- PRIBIO | PCATCH, "pipdwc", 0);
- if (error)
- goto error1;
- if (wpipe->pipe_state & PIPE_EOF) {
- error = EPIPE;
- goto error1;
- }
- goto retry;
- }
-
- wpipe->pipe_state |= PIPE_DIRECTW;
-
- pipelock(wpipe, 0);
- PIPE_UNLOCK(wpipe);
- error = pipe_build_write_buffer(wpipe, uio);
- PIPE_LOCK(wpipe);
- pipeunlock(wpipe);
- if (error) {
- wpipe->pipe_state &= ~PIPE_DIRECTW;
- goto error1;
- }
-
- error = 0;
- while (!error && (wpipe->pipe_state & PIPE_DIRECTW)) {
- if (wpipe->pipe_state & PIPE_EOF) {
- pipelock(wpipe, 0);
- PIPE_UNLOCK(wpipe);
- pipe_destroy_write_buffer(wpipe);
- PIPE_LOCK(wpipe);
- pipeselwakeup(wpipe, wpipe);
- pipeunlock(wpipe);
- error = EPIPE;
- goto error1;
- }
- if (wpipe->pipe_state & PIPE_WANTR) {
- wpipe->pipe_state &= ~PIPE_WANTR;
- wakeup(wpipe);
- }
- pipeselwakeup(wpipe, wpipe);
- error = msleep(wpipe, PIPE_MTX(wpipe), PRIBIO | PCATCH,
- "pipdwt", 0);
- }
-
- pipelock(wpipe,0);
- if (wpipe->pipe_state & PIPE_DIRECTW) {
- /*
- * this bit of trickery substitutes a kernel buffer for
- * the process that might be going away.
- */
- pipe_clone_write_buffer(wpipe);
- } else {
- PIPE_UNLOCK(wpipe);
- pipe_destroy_write_buffer(wpipe);
- PIPE_LOCK(wpipe);
- }
- pipeunlock(wpipe);
- return (error);
-
-error1:
- wakeup(wpipe);
- return (error);
-}
-#endif
-
-
-
-static int
-pipe_write(struct fileproc *fp, struct uio *uio, __unused kauth_cred_t active_cred, __unused int flags, __unused struct proc *p)
-{
- int error = 0;
- int orig_resid;
- int pipe_size;
- struct pipe *wpipe, *rpipe;
-
- rpipe = (struct pipe *)fp->f_data;
-
- PIPE_LOCK(rpipe);
- wpipe = rpipe->pipe_peer;
-
- /*
- * detect loss of pipe read side, issue SIGPIPE if lost.
- */
- if (wpipe == NULL || (wpipe->pipe_state & PIPE_EOF)) {
- PIPE_UNLOCK(rpipe);
- return (EPIPE);
- }
-#ifdef MAC
- error = mac_check_pipe_write(active_cred, wpipe);
- if (error) {
- PIPE_UNLOCK(rpipe);
- return (error);
- }
-#endif
- ++wpipe->pipe_busy;
-
- pipe_size = 0;
-
- if (wpipe->pipe_buffer.buffer == 0) {
- /*
- * need to allocate some storage... we delay the allocation
- * until the first write on fd[0] to avoid allocating storage for both
- * 'pipe ends'... most pipes are half-duplex with the writes targeting
- * fd[1], so allocating space for both ends is a waste...
- *
- * Reduce to 1/4th pipe size if we're over our global max.
- */
- if (amountpipekva > maxpipekva / 2)
- pipe_size = SMALL_PIPE_SIZE;
- else
- pipe_size = PIPE_SIZE;
- }
-
- /*
- * If it is advantageous to resize the pipe buffer, do
- * so.
- */
- if ((uio_resid(uio) > PIPE_SIZE) &&
- (wpipe->pipe_buffer.size <= PIPE_SIZE) &&
- (amountpipekva < maxpipekva / 2) &&
- (nbigpipe < LIMITBIGPIPES) &&
-#ifndef PIPE_NODIRECT
- (wpipe->pipe_state & PIPE_DIRECTW) == 0 &&
-#endif
- (wpipe->pipe_buffer.cnt == 0)) {
-
- pipe_size = BIG_PIPE_SIZE;
-
- }
- if (pipe_size) {
- /*
- * need to do initial allocation or resizing of pipe
- */
- if ((error = pipelock(wpipe, 1)) == 0) {
- PIPE_UNLOCK(wpipe);
- if (pipespace(wpipe, pipe_size) == 0)
- OSAddAtomic(1, (SInt32 *)&nbigpipe);
- PIPE_LOCK(wpipe);
- pipeunlock(wpipe);
-
- if (wpipe->pipe_buffer.buffer == 0) {
- /*
- * initial allocation failed
- */
- error = ENOMEM;
- }
- }
- if (error) {
- /*
- * If an error occurred unbusy and return, waking up any pending
- * readers.
- */
- --wpipe->pipe_busy;
- if ((wpipe->pipe_busy == 0) &&
- (wpipe->pipe_state & PIPE_WANT)) {
- wpipe->pipe_state &= ~(PIPE_WANT | PIPE_WANTR);
- wakeup(wpipe);
- }
- PIPE_UNLOCK(rpipe);
- return(error);
- }
- }
- // LP64todo - fix this!
- orig_resid = uio_resid(uio);
projects / apple / xnu.git / blobdiff