xnu-792.21.3.tar.gz

[apple/xnu.git] / pexpert / i386 / pe_serial.c

diff --git a/pexpert/i386/pe_serial.c b/pexpert/i386/pe_serial.c
index 2bce2811c896823c1146c0896b1c898df545bcbb..ff104bba5d64fddbe97f4fa4031bc50f6054a1a2 100644 (file)
--- a/pexpert/i386/pe_serial.c
+++ b/pexpert/i386/pe_serial.c
@@ -1,23 +1,29 @@
 /*
  * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
  *
 /*
  * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
  *

- * @APPLE_LICENSE_HEADER_START@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@

  * 
  * 

- * The contents of this file constitute Original Code as defined in and
- * are subject to the Apple Public Source License Version 1.1 (the
- * "License").  You may not use this file except in compliance with the
- * License.  Please obtain a copy of the License at
- * http://www.apple.com/publicsource and read it before using this file.
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.

  * 
  * 

- * This Original Code and all software distributed under the License are
- * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ * 
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER

  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,

- * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
- * License for the specific language governing rights and limitations
- * under the License.
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
+ * limitations under the License.

  * 
  * 

- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@

  */
 
 /*
  */
 
 /*


@@ -67,18 +73,12 @@ enum {
 };
 
 enum {
 };
 
 enum {

-    UART_LSR_DR    = 0x01,
-    UART_LSR_OE    = 0x02,
-    UART_LSR_PE    = 0x04,
-    UART_LSR_FE    = 0x08,

     UART_LSR_THRE  = 0x20
 };
 
     UART_LSR_THRE  = 0x20
 };
 

-static unsigned uart_baud_rate = 115200;
+#define UART_BAUD_RATE  115200

 #define UART_PORT_ADDR  COM1_PORT_ADDR
 
 #define UART_PORT_ADDR  COM1_PORT_ADDR
 

-#define UART_CLOCK  1843200   /* 1.8432 MHz clock */
-

 #define WRITE(r, v)  outb(UART_PORT_ADDR + UART_##r, v)
 #define READ(r)      inb(UART_PORT_ADDR + UART_##r)
 #define DELAY(x)     { volatile int _d_; for (_d_ = 0; _d_ < (10000*x); _d_++) ; }
 #define WRITE(r, v)  outb(UART_PORT_ADDR + UART_##r, v)
 #define READ(r)      inb(UART_PORT_ADDR + UART_##r)
 #define DELAY(x)     { volatile int _d_; for (_d_ = 0; _d_ < (10000*x); _d_++) ; }


@@ -102,6 +102,8 @@ uart_probe( void )
 static void
 uart_set_baud_rate( unsigned long baud_rate )
 {
 static void
 uart_set_baud_rate( unsigned long baud_rate )
 {

+    #define UART_CLOCK  1843200   /* 1.8432 MHz clock */
+

     const unsigned char lcr = READ( LCR );
     unsigned long       div;
 
     const unsigned char lcr = READ( LCR );
     unsigned long       div;
 


@@ -124,40 +126,8 @@ uart_putc( char c )
     WRITE( THR, c );
 }
 
     WRITE( THR, c );
 }
 

-static int
-uart_getc( void )
-{
-    /*
-     * This function returns:
-     * -1 : no data
-     * -2 : receiver error
-     * >0 : character received
-     */
-
-    unsigned char lsr;
-
-    if (!uart_initted) return -1;
-
-    lsr = READ( LSR );
-
-    if ( lsr & (UART_LSR_FE | UART_LSR_PE | UART_LSR_OE) )
-    {
-        READ( RBR ); /* discard */
-        return -2;
-    }
-
-    if ( lsr & UART_LSR_DR )
-    {
-        return READ( RBR );
-    }
-
-    return -1;
-}
-

 int serial_init( void )
 {
 int serial_init( void )
 {

-    unsigned serial_baud_rate = 0;
-       

     if ( /*uart_initted ||*/ uart_probe() == 0 ) return 0;
 
     /* Disable hardware interrupts */
     if ( /*uart_initted ||*/ uart_probe() == 0 ) return 0;
 
     /* Disable hardware interrupts */


@@ -173,16 +143,9 @@ int serial_init( void )
 
     WRITE( LCR, UART_LCR_8BITS );
 
 
     WRITE( LCR, UART_LCR_8BITS );
 

-    /* Set baud rate - use the supplied boot-arg if available */
+    /* Set baud rate */

 
 

-    if (PE_parse_boot_arg("serialbaud", &serial_baud_rate))
-    {
-           /* Valid divisor? */
-           if (!((UART_CLOCK / 16) % serial_baud_rate)) {
-                   uart_baud_rate = serial_baud_rate;
-           }
-    }
-    uart_set_baud_rate( uart_baud_rate );
+    uart_set_baud_rate( UART_BAUD_RATE );

 
     /* Assert DTR# and RTS# lines (OUT2?) */
 
 
     /* Assert DTR# and RTS# lines (OUT2?) */
 


@@ -205,5 +168,5 @@ void serial_putc( char c )
 
 int serial_getc( void )
 {
 
 int serial_getc( void )
 {

-    return uart_getc();
+    return 0;  /* not supported */

 }
 }