/*
* Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
*
- * @APPLE_LICENSE_HEADER_START@
+ * @APPLE_LICENSE_OSREFERENCE_HEADER_START@
*
- * The contents of this file constitute Original Code as defined in and
- * are subject to the Apple Public Source License Version 1.1 (the
- * "License"). You may not use this file except in compliance with the
- * License. Please obtain a copy of the License at
- * http://www.apple.com/publicsource and read it before using this file.
- *
- * This Original Code and all software distributed under the License are
- * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the
- * License for the specific language governing rights and limitations
- * under the License.
- *
- * @APPLE_LICENSE_HEADER_END@
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the
+ * License may not be used to create, or enable the creation or
+ * redistribution of, unlawful or unlicensed copies of an Apple operating
+ * system, or to circumvent, violate, or enable the circumvention or
+ * violation of, any terms of an Apple operating system software license
+ * agreement.
+ *
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this
+ * file.
+ *
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * @APPLE_LICENSE_OSREFERENCE_HEADER_END@
*/
/*
Emulate.s
*/
-#include <cpus.h>
#include <ppc/asm.h>
#include <ppc/proc_reg.h>
#include <ppc/exception.h>
+#include <ppc/cpu_capabilities.h>
#include <mach/machine/vm_param.h>
#include <assym.s>
-#define kernAccess 31
#define traceInst 30
#define dssAllDone 29
LEXT(Emulate)
+ bf-- pf64Bitb,emn64 ; Skip if not 64-bit
+ b EXT(Emulate64) ; Jump to the 64-bit code...
- mfsprg r31,0 ; Get the per_proc
- lis r30,hi16(EXT(dgWork)) ; Get the high half of diagnostic work area
- lwz r12,savesrr1(r13) ; Get the exception info
- ori r30,r30,lo16(EXT(dgWork)) ; And the low half
+emn64: mfsprg r31,0 ; Get the per_proc
+ lwz r12,savesrr1+4(r13) ; Get the exception info
rlwinm. r0,r12,0,SRR1_PRG_ILL_INS_BIT,SRR1_PRG_ILL_INS_BIT ; Emulation candidate?
- lwz r30,dgFlags(r30) ; Get the flags
+ lwz r30,dgFlags(0) ; Get the flags
beq+ eExit ; Nope, do not try to emulate...
rlwinm. r0,r30,0,enaDiagEMb,enaDiagEMb ; Do we want to try to emulate something?
cror cr1_eq,cr1_eq,cr0_eq ; Remember
bne cr1_eq,eNotIndex ; Go check non-index forms...
- rlwinm. r21,r10,18,25,29 ; Extract index to rA to build EA
- rlwinm r22,r10,23,25,29 ; Extract index to rB
- addi r24,r13,saver0 ; Point to the start of registers
+ rlwinm. r21,r10,19,24,28 ; Extract index to rA to build EA
+ rlwinm r22,r10,24,24,28 ; Extract index to rB
+ addi r24,r13,saver0+4 ; Point to the start of registers
li r19,0 ; Assume 0 base
beq eZeroBase ; Yes...
lwzx r19,r24,r21 ; Get the base register value
cror cr1_eq,cr1_eq,cr0_eq ; Remember
bne cr1,eExit ; Not one we handle...
- rlwinm. r21,r10,18,25,29 ; Extract index to rA to build EA
- addi r24,r13,saver0 ; Point to the start of registers
+ rlwinm. r21,r10,19,24,28 ; Extract index to rA to build EA
+ addi r24,r13,saver0+4 ; Point to the start of registers
li r22,0 ; Assume 0 base
beq eFinishUp ; Yes, it is...
lwzx r22,r24,r21 ; Get the base register value
eFinishUp: stw r20,savedsisr(r13) ; Set the DSISR
li r11,T_ALIGNMENT ; Get the exception code
- stw r22,savedar(r13) ; Save the DAR
+ stw r22,savedar+4(r13) ; Save the DAR
stw r11,saveexception(r13) ; Set the exception code
b EXT(AlignAssist) ; Go emulate the handler...
.align 5
-eIFetch: lwz r23,savesrr1(r13) ; Get old MSR
+eIFetch: lwz r23,savesrr1+4(r13) ; Get old MSR
mflr r28 ; Save return
rlwinm. r22,r23,0,MSR_PR_BIT,MSR_PR_BIT ; Within kernel?
mfmsr r30 ; Save the MSR for now
- lwz r23,savesrr0(r13) ; Get instruction address
- crmove kernAccess,cr0_eq ; Remember if fault was in kernel
- li r25,4 ; Set access length
- or r22,r22,r30 ; Add PR to access MSR
+ lwz r23,savesrr0+4(r13) ; Get instruction address
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
-
- ori r22,r22,lo16(MASK(MSR_DR)|MASK(MSR_RI)) ; Set RI onto access MSR
+ ori r22,r30,lo16(MASK(MSR_DR)|MASK(MSR_RI)) ; Set RI and DR onto access MSR
crset cr0_eq ; Set this to see if we failed
mtmsr r22 ; Flip DR, RI, and maybe PR on
lwz r10,0(r23) ; Fetch the instruction
- crmove 28,cr0_eq ; Remember if we failed
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- mr r3,r30 ; Get MSR to load
- sc ; Get back to supervisor state
-
- bfl+ kernAccess,aaUnSetSegs ; Go set SRs if we are in user and need to
+ mtmsr r30 ; Trans and RI off
+ isync
mtlr r28 ; Restore the LR
- crmove cr0_eq,28 ; Set CR0_EQ if the fetch succeeded
blr ; Return with instruction image in R10
;
eRedriveAsISI:
- lwz r6,savesrr1(r13) ; Get the srr1 value
+ lwz r6,savesrr1+4(r13) ; Get the srr1 value
lwz r4,SAVflags(r13) ; Pick up the flags
li r11,T_INSTRUCTION_ACCESS ; Set failing instruction fetch code
rlwimi r6,r1,0,0,4 ; Move the DSISR bits to the SRR1
oris r4,r4,hi16(SAVredrive) ; Set the redrive bit
stw r11,saveexception(r13) ; Set the replacement code
stw r4,SAVflags(r13) ; Set redrive request
- stw r6,savesrr1(r13) ; Set the srr1 value
+ stw r6,savesrr1+4(r13) ; Set the srr1 value
b EXT(EmulExit) ; Bail out to handle ISI...
.globl EXT(AlignAssist)
LEXT(AlignAssist)
-
-#if 0
- b EXT(EmulExit) ; Just return for now...
-#endif
-
-
+ bf-- pf64Bitb,aan64 ; Skip if not 64-bit
+ b EXT(AlignAssist64) ; Jump to the 64-bit code...
+
+aan64: lwz r20,savedsisr(r13) ; Get the DSISR
+ li r0,0 ; Assume we emulate
mfsprg r31,0 ; Get the per_proc
- lwz r20,savedsisr(r13) ; Get the DSISR
+ mtcrf 0x10,r20 ; Put instruction ID in CR for later
lwz r21,spcFlags(r31) ; Grab the special flags
- mtcrf 0x1C,r20 ; Put instruction ID in CR for later
+ stw r0,savemisc3(r13) ; Assume that we emulate ok
+ mtcrf 0x08,r20 ; Put instruction ID in CR for later
rlwinm. r0,r21,0,runningVMbit,runningVMbit ; Are we running a VM?
- lwz r22,savesrr1(r13) ; Get the SRR1
+ mtcrf 0x04,r20 ; Put instruction ID in CR for later
+ lwz r22,savesrr1+4(r13) ; Get the SRR1
bne- aaPassAlong ; We are in a VM, no emulation for alignment exceptions...
- rlwinm. r0,r21,0,trapUnalignbit,trapUnalignbit ; Should we trap alignment exceptions?
+ lwz r19,dgFlags(0) ; Get the diagnostics flags
crxor iFloat,iOptype1,iOptype2 ; Set this to 0 if both bits are either 0 or 1
mr r26,r20 ; Save the DSISR
- bne- aaPassAlong ; No alignment exceptions allowed...
rlwinm. r0,r22,0,MSR_SE_BIT,MSR_SE_BIT ; Were we single stepping?
- lwz r23,savedar(r13) ; Pick up the address that we want to access
+ lwz r23,savedar+4(r13) ; Pick up the address that we want to access
crnot traceInst,cr0_eq ; Remember if trace is on
- rlwinm. r0,r21,0,notifyUnalignbit,notifyUnalignbit ; Should we notify that an alignment exception happened?
- mfsprg r28,2 ; Get the processor features
- crnot iNotify,cr0_eq ; Remember to tell someone we did this
- rlwinm. r22,r22,0,MSR_PR_BIT,MSR_PR_BIT ; Did we take the exception in the kernel and isolate PR?
+
+ rlwinm. r0,r19,0,enaNotifyEMb,enaNotifyEMb ; Should we notify that an alignment exception happened?
mfmsr r30 ; Save the MSR for now
+ crnot iNotify,cr0_eq ; Remember to tell someone we did this
li r29,emfp0 ; Point to work area
crxor iFloat,iFloat,iOptype3 ; Set true if we have a floating point instruction
- or r22,r22,r30 ; Add PR to access MSR
dcbz r29,r31 ; Clear and allocate a cache line for us to work in
- rlwinm r24,r20,2,25,29 ; Get displacement to register to update if update form
+ rlwinm r24,r20,3,24,28 ; Get displacement to register to update if update form
rlwimi r20,r20,24,28,28 ; Move load/store indication to the bottom of index
- ori r22,r22,lo16(MASK(MSR_DR)|MASK(MSR_RI)) ; Set RI onto access MSR
- crmove kernAccess,cr0_eq ; Remember if fault was in kernel
- rlwinm. r28,r28,0,pfAltivecb,pfAltivecb ; Do we have Altivec on this machine?
+ ori r22,r30,lo16(MASK(MSR_DR)|MASK(MSR_RI)) ; Set RI onto access MSR
rlwimi r20,r20,26,27,27 ; Move single/double indication to just above the bottom
- beq aaNoVect ; Nope, no Altivec...
-
- dssall ; We need to kill streams because we are going to flip to problem state
- sync
-
-aaNoVect: lis r29,hi16(aaFPopTable) ; High part of FP branch table
+ lis r29,hi16(EXT(aaFPopTable)) ; High part of FP branch table
bf- iFloat,aaNotFloat ; This is not a floating point instruction...
- li r25,8 ; Assume 8-byte access for now
- ori r29,r29,lo16(aaFPopTable) ; Low part of FP branch table
- bt iDouble,aaFPis8 ; So far, we think we are a double...
- li r25,4 ; Set word access
+ ori r29,r29,lo16(EXT(aaFPopTable)) ; Low part of FP branch table
-aaFPis8: rlwimi r29,r20,0,22,28 ; Index into table based upon register||iDouble||iStore
- ori r0,r30,lo16(MASK(MSR_FP)) ; Turn on floating point
+ rlwimi r29,r20,0,22,28 ; Index into table based upon register||iDouble||iStore
mtctr r29 ; Get set to call the function
bt iStore,aaFPstore ; This is an FP store...
; Here we handle floating point loads
;
-aaFPload: bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
-
- crset cr0_eq ; Set this to see if we failed
- ori r3,r30,lo16(MASK(MSR_FP)) ; We will need FP on in a bit, so turn on when we ditch problem state
- mtmsr r22 ; Flip DR, RI, and maybe PR on
+aaFPload: crset cr0_eq ; Set this to see if we failed
+ mtmsr r22 ; Flip DR, RI
isync
lwz r10,0(r23) ; Get the first word
lwz r11,4(r23) ; Get the second half
aaLdNotDbl: mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state and turn on FP
+
+ mtmsr r30 ; Turn off translation again
+ isync
bf- cr0_eq,aaRedriveAsDSI ; Go redrive this as a DSI...
.align 5
-aaFPstore: mtmsr r0 ; We need floating point on for the first phase
- isync
-
- bctrl ; Go save the source FP register
+aaFPstore: bctrl ; Go save the source FP register
lwz r10,emfp0(r31) ; Get first word
crandc iDouble,iDouble,iOptype4 ; Change to 4-byte access if stfiwx
lwz r11,emfp0+4(r31) ; and the second
bf+ iOptype4,aaNotstfiwx ; This is not a stfiwx...
- li r25,4 ; Set this is a word
mr r10,r11 ; The stfiwx wants to store the second half
aaNotstfiwx:
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
-
crset cr0_eq ; Set this to see if we failed
- mr r3,r30 ; Set the normal MSR
- mtmsr r22 ; Flip DR, RI, and maybe PR on
+ mtmsr r22 ; Flip DR, RI
isync
stw r10,0(r23) ; Save the first word
stw r11,4(r23) ; Save the second half
aaStNotDbl: mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
-
+ mtmsr r30 ; Turn off
+ isync
bf- cr0_eq,aaRedriveAsDSI ; Go redrive this as a DSI...
-
-
;
; Common exit routines
;
-aaComExit: lwz r10,savesrr0(r13) ; Get the failing instruction address
+aaComExit: lwz r10,savesrr0+4(r13) ; Get the failing instruction address
add r24,r24,r13 ; Offset to update register
li r11,T_IN_VAIN ; Assume we are all done
addi r10,r10,4 ; Step to the next instruction
bf iUpdate,aaComExNU ; Skip if not an update form...
- stw r23,saver0(r24) ; Update the target
+ stw r23,saver0+4(r24) ; Update the target
aaComExNU: lwz r9,SAVflags(r13) ; Get the flags
- stw r10,savesrr0(r13) ; Set new PC
+ stw r10,savesrr0+4(r13) ; Set new PC
bt- traceInst,aaComExitrd ; We are tracing, go emulate trace...
bf+ iNotify,aaComExGo ; Nothing special here, go...
-
- bfl+ kernAccess,aaUnSetSegs ; Go set SRs if we are in user and need to
li r11,T_ALIGNMENT ; Set the we just did an alignment exception....
;
; This is not a floating point operation
;
-; The emulation routines for these are positioned every 64 bytes (16 instructions)
-; in a 1024-byte aligned table. It is indexed by taking the low order 4 bits of
+; The table of these emulation routines is indexed by taking the low order 4 bits of
; the instruction code in the DSISR and subtracting 7. If this comes up negative,
; the instruction is not to be emulated. Then we add bit 0 of the code * 4. This
; gives us a fairly compact and almost unique index. Both lwm and stmw map to 0 so
-; that one needs to be further reduced, and we end up with holes at index 6, 8, and 10.
-;
-; If the emulation routine takes more than 16 instructions, it must branch elsewhere
-; to finish up.
+; that one needs to be further reduced, and we end up with holes at a few indexes.
;
.align 5
ori r19,r19,lo16(aaEmTable) ; Low part of table address
blt- aaPassAlong ; We do not handle any of these (lwarx, stwcx., eciwx, ecowx)...
add r19,r19,r3 ; Point to emulation routine
- rlwinm r18,r26,29,25,29 ; Get the target/source register displacement
+ rlwinm r18,r26,30,24,28 ; Get the target/source register displacement
mtctr r19 ; Set the routine address
;
; This is the table of non-floating point emulation routines.
-; It is indexed by low 4 bits of DSISR op type - 7 + bit 0 of
-; op type * 4
-;
+; It is indexed by the code immediately above.
.align 5
.align 5
aaLmwStmw:
- subfic r25,r18,32*4 ; Calculate the length of the transfer
+ rlwinm r17,r18,31,1,29 ; Convert doublword based index to words
li r28,0 ; Set no extra bytes to move (used for string instructions)
- mr r17,r25 ; Save the word transfer length here
+ subfic r17,r17,32*4 ; Calculate the length of the transfer
-aaLSComm: addi r19,r13,saver0 ; Offset to registers in savearea
+aaLSComm: addi r19,r13,saver0+4 ; Offset to registers in savearea
mr r16,r23 ; Make a hunk pointer
-
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
bt iUpdate,aaStmw ; This is the stmw...
subi r17,r17,8*4 ; Back off for another hunk
crset cr0_eq ; Set this to see if we failed
- mtmsr r22 ; Flip DR, RI, and maybe PR on
+ mtmsr r22 ; Flip DR, RI
isync
lwz r2,0(r16) ; Load word 0
lwz r9,28(r16) ; Load word 7
aaLmwB1: mr r4,r0 ; Remember DAR, jus in case we failed the access
- mr r3,r30 ; Set the normal MSR
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Turn off DR, RI
+ isync
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
addi r16,r16,8*4 ; Point up to next input aread
stwx r2,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r15,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r14,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r5,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r6,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r7,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r8,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r9,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
b aaLmwNxt ; Do the next hunk...
lwz r5,12(r16) ; Load word 3
aaLmwB2: mr r4,r0 ; Remember DAR, jus in case we failed the access
- mr r3,r30 ; Set the normal MSR
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Turn off DR, RI
+ isync
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
addi r16,r16,4*4 ; Point up to next input aread
stwx r2,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r15,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r14,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
stwx r5,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
aaLmwL4: or. r5,r17,r28 ; Do we have anything left?
cmplwi cr1,r17,(2*4) ; Do we have one, two, or three full words left?
cmplwi cr1,r17,(2*4) ; Do we have one, two, or three full words left?
mr r3,r30 ; Set the normal MSR
rlwimi r5,r9,8,8,23 ; Move bytes 1 and 2 after 0
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+
+ mtmsr r30 ; Turn off DR, RI
+ isync
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
beq- cr2,aaLmwCb ; No full words, copy bytes...
stwx r2,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
blt cr1,aaLmwCb ; We only had one, we are done...
stwx r15,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
beq cr1,aaLmwCb ; We had two, we are done...
stwx r14,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
aaLmwCb: mr. r28,r28 ; Any trailing bytes to do?
beq+ aaComExit ; Nope, leave...
subi r17,r17,8*4 ; Back off for another hunk
lwzx r2,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r15,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r14,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r5,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r6,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r7,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r8,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r9,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
crset cr0_eq ; Set this to see if we failed
mtmsr r22 ; Flip DR, RI, and maybe PR on
aaStmwB1: mr r4,r0 ; Remember DAR, jus in case we failed the access
- mr r3,r30 ; Set the normal MSR
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Normal MSR
+ isync
bt- cr0_eq,aaStmwNxt ; We have more to do and no failed access...
b aaRedriveAsDSI ; We failed, go redrive this as a DSI...
subi r17,r17,4*4 ; Set count properly
lwzx r2,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r15,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r14,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
lwzx r5,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
crset cr0_eq ; Set this to see if we failed
- mtmsr r22 ; Flip DR, RI, and maybe PR on
+ mtmsr r22 ; Flip DR, RI
isync
stw r2,0(r16) ; Store word 0
addi r16,r16,4*4 ; Point up to next input aread
aaStmwB2: mr r4,r0 ; Remember DAR, jus in case we failed the access
- mr r3,r30 ; Set the normal MSR
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Normal MSR
+ isync
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
beq- cr2,aaStmwBy1 ; No full words, check out bytes
lwzx r2,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
blt cr1,aaStmwBy1 ; We only had one, go save it...
lwzx r15,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
beq cr1,aaStmwBy1 ; We had two, go save it...
lwzx r14,r19,r18 ; Store register
- addi r18,r18,4 ; Next register
- rlwinm r18,r18,0,25,29 ; Wrap back to 0 if needed
+ addi r18,r18,8 ; Next register
+ rlwinm r18,r18,0,24,28 ; Wrap back to 0 if needed
aaStmwBy1: mr. r28,r28 ; Do we have any trailing bytes?
beq+ aaStmwSt ; Nope...
lwzx r5,r19,r18 ; Yes, pick up one extra register
aaStmwSt: crset cr0_eq ; Set this to see if we failed
- mtmsr r22 ; Flip DR, RI, and maybe PR on
+ mtmsr r22 ; Flip DR, RI
isync
beq- cr2,aaStmwBy2 ; No words, check trailing bytes...
stw r2,0(r16) ; Save first word
- bf- cr0_eq,aaStmwDn ; Read failed, escape...
+ bf- cr0_eq,aaStmwDn ; Store failed, escape...
addi r16,r16,4 ; Bump sink
blt cr1,aaStmwBy2 ; We only had one, we are done...
stw r15,0(r16) ; Save second word
- bf- cr0_eq,aaStmwDn ; Read failed, escape...
+ bf- cr0_eq,aaStmwDn ; Store failed, escape...
addi r16,r16,4 ; Bump sink
beq cr1,aaStmwBy2 ; We had two, we are done...
stw r14,0(r16) ; Save third word
+ bf- cr0_eq,aaStmwDn ; Store failed, escape...
addi r16,r16,4 ; Bump sink
aaStmwBy2: rlwinm r2,r5,8,24,31 ; Get byte 0
stb r14,2(r16) ; Save third byte
aaStmwDn: mr r4,r0 ; Remember DAR, jus in case we failed the access
- mr r3,r30 ; Set the normal MSR
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Normal MSR
+ isync
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
.align 5
-aaLswx: lwz r17,savexer(r13) ; Pick up the XER
+aaLswx: lwz r17,savexer+4(r13) ; Pick up the XER
crclr iUpdate ; Make sure we think this the load form
rlwinm. r25,r17,0,25,31 ; Get the number of bytes to load
rlwinm r28,r17,0,30,31 ; Get the number of bytes past an even word
.align 5
-aaStswx: lwz r17,savexer(r13) ; Pick up the XER
+aaStswx: lwz r17,savexer+4(r13) ; Pick up the XER
crclr iUpdate ; Make sure this is clear in case we have 0 length
rlwinm. r25,r17,0,25,31 ; Get the number of bytes to load
rlwinm r28,r17,0,30,31 ; Get the number of bytes past an even word
aaLwbrx:
add r18,r18,r13 ; Index to source register
- li r25,4 ; Set the length
-
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
crset cr0_eq ; Set this to see if we failed
- mr r3,r30 ; Set the normal MSR
mtmsr r22 ; Flip DR, RI, and maybe PR on
isync
lwz r11,0(r23) ; Load the word
mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
-
+ mtmsr r30 ; Restore normal MSR
+ isync
+
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
rlwinm r10,r11,8,0,31 ; Get byte 0 to 3 and byte 2 to 1
rlwimi r10,r11,24,16,23 ; Move byte 1 to byte 2
rlwimi r10,r11,24,0,7 ; Move byte 3 to byte 0
- stw r10,saver0(r18) ; Set the register
+ stw r10,saver0+4(r18) ; Set the register
b aaComExit ; All done, go exit...
aaStwbrx:
add r18,r18,r13 ; Index to source register
- li r25,4 ; Set the length
- lwz r11,saver0(r18) ; Get the register to store
+ lwz r11,saver0+4(r18) ; Get the register to store
rlwinm r10,r11,8,0,31 ; Get byte 0 to 3 and byte 2 to 1
rlwimi r10,r11,24,16,23 ; Move byte 1 to byte 2
rlwimi r10,r11,24,0,7 ; Move byte 3 to byte 0
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
-
crset cr0_eq ; Set this to see if we failed
- mr r3,r30 ; Set the normal MSR
mtmsr r22 ; Flip DR, RI, and maybe PR on
isync
stw r10,0(r23) ; Store the reversed halfword
mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
-
+ mtmsr r30 ; Restore normal MSR
+ isync
+
bt+ cr0_eq,aaComExit ; All done, go exit...
b aaRedriveAsDSI ; We failed, go redrive this as a DSI...
aaLhbrx:
add r18,r18,r13 ; Index to source register
- li r25,2 ; Set the length
-
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
crset cr0_eq ; Set this to see if we failed
- mr r3,r30 ; Set the normal MSR
mtmsr r22 ; Flip DR, RI, and maybe PR on
isync
lhz r11,0(r23) ; Load the halfword
mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Restore normal MSR
+ isync
bf- cr0_eq,aaRedriveAsDSI ; We failed, go redrive this as a DSI...
rlwinm r10,r11,8,16,23 ; Rotate bottom byte up one and clear everything else
rlwimi r10,r11,24,24,31 ; Put old second from bottom into bottom
- stw r10,saver0(r18) ; Set the register
+ stw r10,saver0+4(r18) ; Set the register
b aaComExit ; All done, go exit...
aaSthbrx:
add r18,r18,r13 ; Index to source register
- li r25,2 ; Set the length
- lwz r10,saver0(r18) ; Get the register to store
+ lwz r10,saver0+4(r18) ; Get the register to store
rlwinm r10,r10,8,0,31 ; Rotate bottom byte up one
rlwimi r10,r10,16,24,31 ; Put old second from bottom into bottom
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
-
crset cr0_eq ; Set this to see if we failed
- mr r3,r30 ; Set the normal MSR
mtmsr r22 ; Flip DR, RI, and maybe PR on
isync
sth r10,0(r23) ; Store the reversed halfword
mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Restore normal MSR
+ isync
bt+ cr0_eq,aaComExit ; All done, go exit...
b aaRedriveAsDSI ; We failed, go redrive this as a DSI...
.align 5
-aaDcbz:
- li r25,32 ; Set the length
- rlwinm r23,r23,0,0,26 ; Round back to a 32-byte boundary
-
- bfl+ kernAccess,aaSetSegs ; Go set SRs if we are in user and need to
-
+aaDcbz:
+ lwz r0,savesrr0+4(r13) ; get instruction address
+ li r4,_COMM_PAGE_BASE_ADDRESS
+ rlwinm r23,r23,0,0,26 ; Round EA back to a 32-byte boundary
+ sub r4,r0,r4 ; compute instruction offset from base of commpage
+ cmplwi r4,_COMM_PAGE_AREA_USED ; did fault occur in commpage?
+ bge+ aaDcbz1 ; skip if not in commpage
+ lwz r4,savecr(r13) ; if we take a dcbz in the commpage...
+ rlwinm r4,r4,0,0,27 ; ...clear users cr7 as a flag for commpage code
+ stw r4,savecr(r13)
+aaDcbz1:
crset cr0_eq ; Set this to see if we failed
- mr r3,r30 ; Set the normal MSR
li r0,0 ; Clear this out
mtmsr r22 ; Flip DR, RI, and maybe PR on
isync
stw r0,28(r23) ; Clear word
aaDcbzXit: mr r4,r0 ; Save the DAR if we failed the access
- li r0,loadMSR ; Set the magic "get back to supervisor" SC
- sc ; Get back to supervisor state
+ mtmsr r30 ; Restore normal MSR
+ isync
crclr iUpdate ; Make sure we do not think this is an update form
; Unhandled alignment exception, pass it along
;
-aaPassAlongUnMap:
- bfl+ kernAccess,aaUnSetSegs ; Go set SRs if we are in user and need to
-
-
aaPassAlong:
+ li r0,1 ; Indicate that we failed to emulate
+ stw r0,savemisc3(r13) ; Assume that we emulate ok
b EXT(EmulExit)
.align 5
aaComExitrd:
- bfl+ kernAccess,aaUnSetSegs ; Go set SRs back if we need to because we are not going back to user yet
oris r9,r9,hi16(SAVredrive) ; Set the redrive bit
li r11,T_TRACE ; Set trace interrupt
rlwinm r12,r12,0,16,31 ; Clear top half of SRR1
aaRedriveAsDSI:
mr r20,r1 ; Save the DSISR
mr r21,r4
- bfl+ kernAccess,aaUnSetSegs ; Go set SRs back if we need to because we are not going back to user yet
lwz r4,SAVflags(r13) ; Pick up the flags
li r11,T_DATA_ACCESS ; Set failing data access code
oris r4,r4,hi16(SAVredrive) ; Set the redrive bit
stw r20,savedsisr(r13) ; Set the DSISR of failed access
- stw r21,savedar(r13) ; Set the address of the failed access
+ stw r21,savedar+4(r13) ; Set the address of the failed access
stw r11,saveexception(r13) ; Set the replacement code
stw r4,SAVflags(r13) ; Set redrive request
b EXT(EmulExit) ; Bail out to handle ISI...
-;
-; Set segment registers for user access. Do not call this if we are trying to get
-; supervisor state memory. We do not need this.
-;
-; Performance-wise, we will usually be setting one SR here. Most memory will be
-; allocated before the 1GB mark. Since the kernel maps the first GB, the exception
-; handler always sets the SRs before we get here. Therefore, we will usually
-; have to remap it.
-;
-; Also, we need to un-do these mapping ONLY if we take a non-standard
-; exit, e.g., emulate DSI, emulate trace exception, etc. This is because
-; translation will never be turned on until we return and at that point,
-; normal exception exit code will restore the first 4 SRs if needed.
-;
-
- .align 5
-
- .globl EXT(aaSetSegsX)
-
-LEXT(aaSetSegsX)
-
-aaSetSegs: addi r3,r25,-1 ; Point at last accessed offset in range
- lwz r7,PP_USERPMAP(r31) ; Get the current user pmap
- lis r0,0x4000 ; This is the address of the first segment outside of the kernel
- rlwinm r5,r23,6,26,29 ; Get index into pmap table
- add r4,r23,r3 ; Point to the last byte accessed
- addi r5,r5,PMAP_SEGS ; Point to the segment slot
- cmplw r23,r0 ; See if first segment register needs to be reloaded
- cmplw cr2,r4,r0 ; Do we need to set the second (if any) SR?
- xor r0,r4,r23 ; See if we are in the same segment as first
- bge aaSetS1ok ; Nope, we are in a pure user range
-
- lwzx r6,r5,r7 ; Get the user address space SR value
- mtsrin r6,r23 ; Load the corresponding SR register
-
-aaSetS1ok: rlwinm. r0,r0,0,0,3 ; Any change in segment?
- bgelr- cr2 ; We are in user only space, we do not need to mess with SR
- rlwinm r5,r4,6,26,29 ; Get index into pmap table
- beqlr+ ; No change in segment, we are done...
-
- lwzx r6,r5,r7 ; Get the user address space SR value
- mtsrin r6,r4 ; Load the corresponding SR register
- blr ; Leave...
-
-;
-; Unset segment registers for user access. Do not call unless we had a user access.
-;
-
- .align 5
-
- .globl EXT(aaUnSetSegsX)
-
-LEXT(aaUnSetSegsX)
-
-aaUnSetSegs:
- addi r3,r25,-1 ; Point at last accessed offset in range
- lis r0,0x4000 ; This is the address of the first segment outside of the kernel
- lis r5,hi16(KERNEL_SEG_REG0_VALUE) ; Get the high half of the kernel SR0 value
- add r4,r23,r3 ; Point to the last byte accessed
- cmplw r23,r0 ; See if first segment register needs to be reloaded
- rlwimi r5,r23,24,8,11 ; Make the correct kernel segment
- cmplw cr2,r4,r0 ; Do we need to set the second (if any) SR?
- xor r0,r4,r23 ; See if we are in the same segment as first
- bge aaUnSetS1ok ; Nope, we are in a pure user range
-
- mtsrin r5,r23 ; Load the corresponding SR register
-
-aaUnSetS1ok:
- rlwinm. r0,r0,0,0,3 ; Any change in segment?
- bgelr cr2 ; We are in user only space, we do not need to mess with SR
- rlwimi r5,r4,24,8,11 ; Make the correct kernel segment
- beqlr+ ; No change in segment, we are done...
-
- mtsrin r5,r4 ; Load the corresponding SR register
- blr ; Leave...
-
;
;
.align 10 ; Make sure we are on a 1k boundary
+ .globl EXT(aaFPopTable)
-aaFPopTable:
+LEXT(aaFPopTable)
lfs f0,emfp0(r31) ; Load single variant
blr
projects / apple / xnu.git / blobdiff