/*
- * Copyright (c) 2006 Apple Computer, Inc. All Rights Reserved.
- *
- * @APPLE_LICENSE_OSREFERENCE_HEADER_START@
- *
- * This file contains Original Code and/or Modifications of Original Code
- * as defined in and that are subject to the Apple Public Source License
- * Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. The rights granted to you under the
- * License may not be used to create, or enable the creation or
- * redistribution of, unlawful or unlicensed copies of an Apple operating
- * system, or to circumvent, violate, or enable the circumvention or
- * violation of, any terms of an Apple operating system software license
- * agreement.
+ * Copyright (c) 2000-2019 Apple Inc. All rights reserved.
*
- * Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
- * The Original Code and all software distributed under the License are
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
- * Please see the License for the specific language governing rights and
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ *
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ *
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
* limitations under the License.
*
- * @APPLE_LICENSE_OSREFERENCE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
/* Copyright (c) 1998, 1999 Apple Computer, Inc. All Rights Reserved */
/* Copyright (c) 1995 NeXT Computer, Inc. All Rights Reserved */
#include <sys/appleapiopts.h>
#include <sys/cdefs.h>
-#define PR_SLOWHZ 2 /* 2 slow timeouts per second */
-#define PR_FASTHZ 5 /* 5 fast timeouts per second */
+/* XXX: this will go away */
+#define PR_SLOWHZ 2 /* 2 slow timeouts per second */
+
+/*
+ * The arguments to the ctlinput routine are
+ * (*protosw[].pr_ctlinput)(cmd, sa, arg);
+ * where cmd is one of the commands below, sa is a pointer to a sockaddr,
+ * and arg is a `void *' argument used within a protocol family.
+ */
+#define PRC_IFDOWN 0 /* interface transition */
+#define PRC_ROUTEDEAD 1 /* select new route if possible ??? */
+#define PRC_IFUP 2 /* interface has come back up */
+#define PRC_QUENCH2 3 /* DEC congestion bit says slow down */
+#define PRC_QUENCH 4 /* some one said to slow down */
+#define PRC_MSGSIZE 5 /* message size forced drop */
+#define PRC_HOSTDEAD 6 /* host appears to be down */
+#define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */
+#define PRC_UNREACH_NET 8 /* no route to network */
+#define PRC_UNREACH_HOST 9 /* no route to host */
+#define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */
+#define PRC_UNREACH_PORT 11 /* bad port # */
+/* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */
+#define PRC_UNREACH_SRCFAIL 13 /* source route failed */
+#define PRC_REDIRECT_NET 14 /* net routing redirect */
+#define PRC_REDIRECT_HOST 15 /* host routing redirect */
+#define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */
+#define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */
+#define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */
+#define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */
+#define PRC_PARAMPROB 20 /* header incorrect */
+#define PRC_UNREACH_ADMIN_PROHIB 21 /* packet administrativly prohibited */
+
+#define PRC_NCMDS 22
+
+#define PRC_IS_REDIRECT(cmd) \
+ ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST)
+
+#ifdef BSD_KERNEL_PRIVATE
+#include <sys/eventhandler.h>
+#endif
-#ifdef PRIVATE
+#ifdef KERNEL_PRIVATE
+#include <sys/socket.h>
+#include <sys/socketvar.h>
+#include <sys/queue.h>
+#include <kern/locks.h>
/* Forward declare these structures referenced from prototypes below. */
struct mbuf;
struct socket;
struct sockopt;
struct socket_filter;
+struct uio;
+struct ifnet;
+#ifdef XNU_KERNEL_PRIVATE
+struct domain_old;
+struct proc;
+#endif /* XNU_KERNEL_PRIVATE */
+
+#pragma pack(4)
-/*#ifdef _KERNEL*/
+#ifdef XNU_KERNEL_PRIVATE
+/*
+ * Legacy protocol switch table.
+ *
+ * NOTE: Do not modify this structure, as there are modules outside of xnu
+ * which rely on the size and layout for binary compatibility. This structure
+ * is simply used by the exported net_{add,del}_proto_old, pffindproto_old
+ * routines, and by the domain_old structure. Internally, protocol switch
+ * tables are stored in the private variant of protosw defined down below.
+ */
+struct protosw_old {
+#else
+struct protosw {
+#endif /* !XNU_KERNEL_PRIVATE */
+ short pr_type; /* socket type used for */
+ struct domain *pr_domain; /* domain protocol a member of */
+ short pr_protocol; /* protocol number */
+ unsigned int pr_flags; /* see below */
+ /*
+ * protocol-protocol hooks
+ */
+ void (*pr_input) /* input to protocol (from below) */
+ (struct mbuf *, int len);
+ int (*pr_output) /* output to protocol (from above) */
+ (struct mbuf *m, struct socket *so);
+ void (*pr_ctlinput) /* control input (from below) */
+ (int, struct sockaddr *, void *, struct ifnet *);
+ int (*pr_ctloutput) /* control output (from above) */
+ (struct socket *, struct sockopt *);
+ /*
+ * user-protocol hook
+ */
+ void *pr_ousrreq;
+ /*
+ * utility hooks
+ */
+ void (*pr_init)(void); /* initialization hook */
+ void (*pr_unused)(void); /* placeholder - fasttimo is removed */
+ void (*pr_unused2)(void); /* placeholder - slowtimo is removed */
+ void (*pr_drain)(void); /* flush any excess space possible */
+ int (*pr_sysctl) /* sysctl for protocol */
+ (int *, u_int, void *, size_t *, void *, size_t);
+#ifdef XNU_KERNEL_PRIVATE
+ struct pr_usrreqs_old *pr_usrreqs; /* supersedes pr_usrreq() */
+#else
+ struct pr_usrreqs *pr_usrreqs; /* supersedes pr_usrreq() */
+#endif /* !XNU_KERNEL_PRIVATE */
+ int (*pr_lock) /* lock function for protocol */
+ (struct socket *so, int refcnt, void *debug);
+ int (*pr_unlock) /* unlock for protocol */
+ (struct socket *so, int refcnt, void *debug);
+ lck_mtx_t *(*pr_getlock) /* retrieve protocol lock */
+ (struct socket *so, int flags);
+ /*
+ * Implant hooks
+ */
+ TAILQ_HEAD(, socket_filter) pr_filter_head;
+#ifdef XNU_KERNEL_PRIVATE
+ struct protosw_old *pr_next; /* chain for domain */
+#else
+ struct protosw *pr_next; /* chain for domain */
+#endif /* !XNU_KERNEL_PRIVATE */
+ u_int32_t reserved[1]; /* padding for future use */
+};
+
+#pragma pack()
+
+#ifdef XNU_KERNEL_PRIVATE
/*
* Protocol switch table.
*
* which is used for protocol-protocol and system-protocol communication.
*
* A protocol is called through the pr_init entry before any other.
- * Thereafter it is called every 200ms through the pr_fasttimo entry and
- * every 500ms through the pr_slowtimo for timer based actions.
- * The system will call the pr_drain entry if it is low on space and
- * this should throw away any non-critical data.
+ * The system will call the pr_drain entry if it is low on space and this
+ * should throw away any non-critical data.
*
* Protocols pass data between themselves as chains of mbufs using
* the pr_input and pr_output hooks. Pr_input passes data up (towards
*
* The userreq routine interfaces protocols to the system and is
* described below.
+ *
+ * After a protocol is attached, its pr_domain will be set to the domain
+ * which the protocol belongs to, and its pr_protosw will be set to the
+ * address of the protosw instance. The latter is useful for finding
+ * the real/original protosw instance, in the event so_proto is altered
+ * to point to an alternative/derivative protosw. E.g. the list of
+ * socket filters is only applicable on the original protosw instance.
+ *
+ * Internal, private and extendable representation of protosw.
*/
-
-#include <sys/socketvar.h>
-#include <sys/queue.h>
-#ifdef KERNEL
-#include <kern/locks.h>
-#endif /* KERNEL */
-
-#if __DARWIN_ALIGN_POWER
-#pragma options align=power
-#endif
-
struct protosw {
- short pr_type; /* socket type used for */
- struct domain *pr_domain; /* domain protocol a member of */
- short pr_protocol; /* protocol number */
- unsigned int pr_flags; /* see below */
-/* protocol-protocol hooks */
- void (*pr_input)(struct mbuf *, int len);
- /* input to protocol (from below) */
- int (*pr_output)(struct mbuf *m, struct socket *so);
- /* output to protocol (from above) */
- void (*pr_ctlinput)(int, struct sockaddr *, void *);
- /* control input (from below) */
- int (*pr_ctloutput)(struct socket *, struct sockopt *);
- /* control output (from above) */
-/* user-protocol hook */
- void *pr_ousrreq;
-/* utility hooks */
- void (*pr_init)(void); /* initialization hook */
- void (*pr_fasttimo)(void);
- /* fast timeout (200ms) */
- void (*pr_slowtimo)(void);
- /* slow timeout (500ms) */
- void (*pr_drain)(void);
- /* flush any excess space possible */
-#if __APPLE__
- int (*pr_sysctl)(int *, u_int, void *, size_t *, void *, size_t);
- /* sysctl for protocol */
-#endif
- struct pr_usrreqs *pr_usrreqs; /* supersedes pr_usrreq() */
-#if __APPLE__
- int (*pr_lock) (struct socket *so, int locktype, int debug); /* lock function for protocol */
- int (*pr_unlock) (struct socket *so, int locktype, int debug); /* unlock for protocol */
-#ifdef _KERN_LOCKS_H_
- lck_mtx_t * (*pr_getlock) (struct socket *so, int locktype);
-#else
- void * (*pr_getlock) (struct socket *so, int locktype);
-#endif
-#endif
-#if __APPLE__
-/* Implant hooks */
+ TAILQ_ENTRY(protosw) pr_entry; /* chain for domain */
+ struct domain *pr_domain; /* domain protocol a member of */
+ struct protosw *pr_protosw; /* pointer to self */
+ u_int16_t pr_type; /* socket type used for */
+ u_int16_t pr_protocol; /* protocol number */
+ u_int32_t pr_flags; /* see below */
+ /*
+ * protocol-protocol hooks
+ */
+ void (*pr_input) /* input to protocol (from below) */
+ (struct mbuf *, int len);
+ int (*pr_output) /* output to protocol (from above) */
+ (struct mbuf *m, struct socket *so);
+ void (*pr_ctlinput) /* control input (from below) */
+ (int, struct sockaddr *, void *, struct ifnet *);
+ int (*pr_ctloutput) /* control output (from above) */
+ (struct socket *, struct sockopt *);
+ /*
+ * user-protocol hook
+ */
+ struct pr_usrreqs *pr_usrreqs; /* user request; see list below */
+ /*
+ * utility hooks
+ */
+ void (*pr_init) /* initialization hook */
+ (struct protosw *, struct domain *);
+ void (*pr_drain)(void); /* flush any excess space possible */
+ int (*pr_sysctl) /* sysctl for protocol */
+ (int *, u_int, void *, size_t *, void *, size_t);
+ int (*pr_lock) /* lock function for protocol */
+ (struct socket *so, int refcnt, void *debug);
+ int (*pr_unlock) /* unlock for protocol */
+ (struct socket *so, int refcnt, void *debug);
+ lck_mtx_t *(*pr_getlock) /* retrieve protocol lock */
+ (struct socket *so, int flags);
+ /*
+ * misc
+ */
TAILQ_HEAD(, socket_filter) pr_filter_head;
- struct protosw *pr_next; /* Chain for domain */
- u_long reserved[1]; /* Padding for future use */
-#endif
+ struct protosw_old *pr_old;
+
+ void (*pr_update_last_owner) /* update last socket owner */
+ (struct socket *so, struct proc *p, struct proc *ep);
+
+ void (*pr_copy_last_owner) /* copy last socket from listener */
+ (struct socket *so, struct socket *head);
};
-#if __DARWIN_ALIGN_POWER
-#pragma options align=reset
-#endif
+/*
+ * Values for the flags argument of pr_getlock
+ */
+#define PR_F_WILLUNLOCK 0x01 /* Will unlock (e.g., msleep) after the pr_getlock call */
+
+#endif /* XNU_KERNEL_PRIVATE */
/*
* Values for pr_flags.
* is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed
* anyhow).
*/
-#define PR_ATOMIC 0x01 /* exchange atomic messages only */
-#define PR_ADDR 0x02 /* addresses given with messages */
-#define PR_CONNREQUIRED 0x04 /* connection required by protocol */
-#define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */
-#define PR_RIGHTS 0x10 /* passes capabilities */
-#define PR_IMPLOPCL 0x20 /* implied open/close */
-#define PR_LASTHDR 0x40 /* enforce ipsec policy; last header */
-#define PR_PROTOLOCK 0x80 /* protocol takes care of it's own locking */
-#define PR_PCBLOCK 0x100 /* protocol supports per pcb finer grain locking */
-#define PR_DISPOSE 0x200 /* protocol requires late lists disposal */
-
-/*
- * The arguments to usrreq are:
- * (*protosw[].pr_usrreq)(up, req, m, nam, opt);
- * where up is a (struct socket *), req is one of these requests,
- * m is a optional mbuf chain containing a message,
- * nam is an optional mbuf chain containing an address,
- * and opt is a pointer to a socketopt structure or nil.
- * The protocol is responsible for disposal of the mbuf chain m,
- * the caller is responsible for any space held by nam and opt.
- * A non-zero return from usrreq gives an
- * UNIX error number which should be passed to higher level software.
- */
-#define PRU_ATTACH 0 /* attach protocol to up */
-#define PRU_DETACH 1 /* detach protocol from up */
-#define PRU_BIND 2 /* bind socket to address */
-#define PRU_LISTEN 3 /* listen for connection */
-#define PRU_CONNECT 4 /* establish connection to peer */
-#define PRU_ACCEPT 5 /* accept connection from peer */
-#define PRU_DISCONNECT 6 /* disconnect from peer */
-#define PRU_SHUTDOWN 7 /* won't send any more data */
-#define PRU_RCVD 8 /* have taken data; more room now */
-#define PRU_SEND 9 /* send this data */
-#define PRU_ABORT 10 /* abort (fast DISCONNECT, DETATCH) */
-#define PRU_CONTROL 11 /* control operations on protocol */
-#define PRU_SENSE 12 /* return status into m */
-#define PRU_RCVOOB 13 /* retrieve out of band data */
-#define PRU_SENDOOB 14 /* send out of band data */
-#define PRU_SOCKADDR 15 /* fetch socket's address */
-#define PRU_PEERADDR 16 /* fetch peer's address */
-#define PRU_CONNECT2 17 /* connect two sockets */
-/* begin for protocols internal use */
-#define PRU_FASTTIMO 18 /* 200ms timeout */
-#define PRU_SLOWTIMO 19 /* 500ms timeout */
-#define PRU_PROTORCV 20 /* receive from below */
-#define PRU_PROTOSEND 21 /* send to below */
-/* end for protocol's internal use */
-#define PRU_SEND_EOF 22 /* send and close */
-#define PRU_NREQ 22
-
-#ifdef PRUREQUESTS
-char *prurequests[] = {
- "ATTACH", "DETACH", "BIND", "LISTEN",
- "CONNECT", "ACCEPT", "DISCONNECT", "SHUTDOWN",
- "RCVD", "SEND", "ABORT", "CONTROL",
- "SENSE", "RCVOOB", "SENDOOB", "SOCKADDR",
- "PEERADDR", "CONNECT2", "FASTTIMO", "SLOWTIMO",
- "PROTORCV", "PROTOSEND",
- "SEND_EOF",
-};
-#endif
-
-#ifdef KERNEL /* users shouldn't see this decl */
-
-struct ifnet;
-struct stat;
-struct ucred;
-struct uio;
-
-/*
- * If the ordering here looks odd, that's because it's alphabetical.
- * Having this structure separated out from the main protoswitch is allegedly
- * a big (12 cycles per call) lose on high-end CPUs. We will eventually
- * migrate this stuff back into the main structure.
- */
-struct pr_usrreqs {
- int (*pru_abort)(struct socket *so);
- int (*pru_accept)(struct socket *so, struct sockaddr **nam);
- int (*pru_attach)(struct socket *so, int proto, struct proc *p);
- int (*pru_bind)(struct socket *so, struct sockaddr *nam,
- struct proc *p);
- int (*pru_connect)(struct socket *so, struct sockaddr *nam,
- struct proc *p);
- int (*pru_connect2)(struct socket *so1, struct socket *so2);
- int (*pru_control)(struct socket *so, u_long cmd, caddr_t data,
- struct ifnet *ifp, struct proc *p);
- int (*pru_detach)(struct socket *so);
- int (*pru_disconnect)(struct socket *so);
- int (*pru_listen)(struct socket *so, struct proc *p);
- int (*pru_peeraddr)(struct socket *so, struct sockaddr **nam);
- int (*pru_rcvd)(struct socket *so, int flags);
- int (*pru_rcvoob)(struct socket *so, struct mbuf *m, int flags);
- int (*pru_send)(struct socket *so, int flags, struct mbuf *m,
- struct sockaddr *addr, struct mbuf *control,
- struct proc *p);
-#define PRUS_OOB 0x1
-#define PRUS_EOF 0x2
-#define PRUS_MORETOCOME 0x4
- int (*pru_sense)(struct socket *so, struct stat *sb);
- int (*pru_shutdown)(struct socket *so);
- int (*pru_sockaddr)(struct socket *so, struct sockaddr **nam);
-
- /*
- * These three added later, so they are out of order. They are used
- * for shortcutting (fast path input/output) in some protocols.
- * XXX - that's a lie, they are not implemented yet
- * Rather than calling sosend() etc. directly, calls are made
- * through these entry points. For protocols which still use
- * the generic code, these just point to those routines.
- */
- int (*pru_sosend)(struct socket *so, struct sockaddr *addr,
- struct uio *uio, struct mbuf *top,
- struct mbuf *control, int flags);
- int (*pru_soreceive)(struct socket *so,
- struct sockaddr **paddr,
- struct uio *uio, struct mbuf **mp0,
- struct mbuf **controlp, int *flagsp);
- int (*pru_sopoll)(struct socket *so, int events,
- struct ucred *cred, void *);
-};
-
-__BEGIN_DECLS
-
-extern int pru_abort_notsupp(struct socket *so);
-extern int pru_accept_notsupp(struct socket *so, struct sockaddr **nam);
-extern int pru_attach_notsupp(struct socket *so, int proto,
- struct proc *p);
-extern int pru_bind_notsupp(struct socket *so, struct sockaddr *nam,
- struct proc *p);
-extern int pru_connect_notsupp(struct socket *so, struct sockaddr *nam,
- struct proc *p);
-extern int pru_connect2_notsupp(struct socket *so1, struct socket *so2);
-extern int pru_control_notsupp(struct socket *so, u_long cmd, caddr_t data,
- struct ifnet *ifp, struct proc *p);
-extern int pru_detach_notsupp(struct socket *so);
-extern int pru_disconnect_notsupp(struct socket *so);
-extern int pru_listen_notsupp(struct socket *so, struct proc *p);
-extern int pru_peeraddr_notsupp(struct socket *so,
- struct sockaddr **nam);
-extern int pru_rcvd_notsupp(struct socket *so, int flags);
-extern int pru_rcvoob_notsupp(struct socket *so, struct mbuf *m,
- int flags);
-extern int pru_send_notsupp(struct socket *so, int flags, struct mbuf *m,
- struct sockaddr *addr, struct mbuf *control,
- struct proc *p);
-extern int pru_sense_null(struct socket *so, struct stat *sb);
-extern int pru_shutdown_notsupp(struct socket *so);
-extern int pru_sockaddr_notsupp(struct socket *so,
- struct sockaddr **nam);
-extern int pru_sosend_notsupp(struct socket *so, struct sockaddr *addr,
- struct uio *uio, struct mbuf *top,
- struct mbuf *control, int flags);
-extern int pru_soreceive_notsupp(struct socket *so,
- struct sockaddr **paddr,
- struct uio *uio, struct mbuf **mp0,
- struct mbuf **controlp, int *flagsp);
-extern int pru_sopoll_notsupp(struct socket *so, int events,
- struct ucred *cred, void *);
-
-__END_DECLS
-
-#endif /* KERNEL */
-
-/*
- * The arguments to the ctlinput routine are
- * (*protosw[].pr_ctlinput)(cmd, sa, arg);
- * where cmd is one of the commands below, sa is a pointer to a sockaddr,
- * and arg is a `void *' argument used within a protocol family.
- */
-#define PRC_IFDOWN 0 /* interface transition */
-#define PRC_ROUTEDEAD 1 /* select new route if possible ??? */
-#define PRC_IFUP 2 /* interface has come back up */
-#define PRC_QUENCH2 3 /* DEC congestion bit says slow down */
-#define PRC_QUENCH 4 /* some one said to slow down */
-#define PRC_MSGSIZE 5 /* message size forced drop */
-#define PRC_HOSTDEAD 6 /* host appears to be down */
-#define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */
-#define PRC_UNREACH_NET 8 /* no route to network */
-#define PRC_UNREACH_HOST 9 /* no route to host */
-#define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */
-#define PRC_UNREACH_PORT 11 /* bad port # */
-/* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */
-#define PRC_UNREACH_SRCFAIL 13 /* source route failed */
-#define PRC_REDIRECT_NET 14 /* net routing redirect */
-#define PRC_REDIRECT_HOST 15 /* host routing redirect */
-#define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */
-#define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */
-#define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */
-#define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */
-#define PRC_PARAMPROB 20 /* header incorrect */
-#define PRC_UNREACH_ADMIN_PROHIB 21 /* packet administrativly prohibited */
-
-#define PRC_NCMDS 22
-
-#define PRC_IS_REDIRECT(cmd) \
- ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST)
-
+#define PR_ATOMIC 0x01 /* exchange atomic messages only */
+#define PR_ADDR 0x02 /* addresses given with messages */
+#define PR_CONNREQUIRED 0x04 /* connection required by protocol */
+#define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */
+#define PR_RIGHTS 0x10 /* passes capabilities */
+#define PR_IMPLOPCL 0x20 /* implied open/close */
+#define PR_LASTHDR 0x40 /* enforce ipsec policy; last header */
+#define PR_PROTOLOCK 0x80 /* protocol takes care of it's own locking */
+#define PR_PCBLOCK 0x100 /* protocol supports per pcb locking */
+#define PR_DISPOSE 0x200 /* protocol requires late lists disposal */
+#ifdef BSD_KERNEL_PRIVATE
+#define PR_INITIALIZED 0x400 /* protocol has been initialized */
+#define PR_ATTACHED 0x800 /* protocol is attached to a domain */
+#define PR_MULTICONN 0x1000 /* supports multiple connect calls */
+#define PR_EVCONNINFO 0x2000 /* protocol generates conninfo event */
+#define PR_PRECONN_WRITE 0x4000 /* protocol supports preconnect write */
+#define PR_DATA_IDEMPOTENT 0x8000 /* protocol supports idempotent data at connectx-time */
+#define PR_OLD 0x10000000 /* added via net_add_proto */
+
+/* pseudo-public domain flags */
+#define PRF_USERFLAGS \
+ (PR_ATOMIC|PR_ADDR|PR_CONNREQUIRED|PR_WANTRCVD|PR_RIGHTS| \
+ PR_IMPLOPCL|PR_LASTHDR|PR_PROTOLOCK|PR_PCBLOCK|PR_DISPOSE)
+#endif /* BSD_KERNEL_PRIVATE */
+
+#ifdef BSD_KERNEL_PRIVATE
#ifdef PRCREQUESTS
-char *prcrequests[] = {
+char *prcrequests[] = {
"IFDOWN", "ROUTEDEAD", "IFUP", "DEC-BIT-QUENCH2",
"QUENCH", "MSGSIZE", "HOSTDEAD", "#7",
"NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH",
"TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS",
"PARAMPROB", "ADMIN-UNREACH"
};
-#endif
+#endif /* PRCREQUESTS */
/*
* The arguments to ctloutput are:
* A non-zero return from usrreq gives an
* UNIX error number which should be passed to higher level software.
*/
-#define PRCO_GETOPT 0
-#define PRCO_SETOPT 1
+#define PRCO_GETOPT 0
+#define PRCO_SETOPT 1
-#define PRCO_NCMDS 2
+#define PRCO_NCMDS 2
#ifdef PRCOREQUESTS
-char *prcorequests[] = {
+char *prcorequests[] = {
"GETOPT", "SETOPT",
};
-#endif
+#endif /* PRCOREQUESTS */
-#ifdef KERNEL
-
-__BEGIN_DECLS
+/*
+ * In earlier BSD network stacks, a single pr_usrreq() function pointer was
+ * invoked with an operation number indicating what operation was desired.
+ * We now provide individual function pointers which protocols can implement,
+ * which offers a number of benefits (such as type checking for arguments).
+ * These older constants are still present in order to support TCP debugging.
+ */
+#define PRU_ATTACH 0 /* attach protocol to up */
+#define PRU_DETACH 1 /* detach protocol from up */
+#define PRU_BIND 2 /* bind socket to address */
+#define PRU_LISTEN 3 /* listen for connection */
+#define PRU_CONNECT 4 /* establish connection to peer */
+#define PRU_ACCEPT 5 /* accept connection from peer */
+#define PRU_DISCONNECT 6 /* disconnect from peer */
+#define PRU_SHUTDOWN 7 /* won't send any more data */
+#define PRU_RCVD 8 /* have taken data; more room now */
+#define PRU_SEND 9 /* send this data */
+#define PRU_ABORT 10 /* abort (fast DISCONNECT, DETATCH) */
+#define PRU_CONTROL 11 /* control operations on protocol */
+#define PRU_SENSE 12 /* return status into m */
+#define PRU_RCVOOB 13 /* retrieve out of band data */
+#define PRU_SENDOOB 14 /* send out of band data */
+#define PRU_SOCKADDR 15 /* fetch socket's address */
+#define PRU_PEERADDR 16 /* fetch peer's address */
+#define PRU_CONNECT2 17 /* connect two sockets */
+/* begin for protocols internal use */
+#define PRU_FASTTIMO 18 /* 200ms timeout */
+#define PRU_SLOWTIMO 19 /* 500ms timeout */
+#define PRU_PROTORCV 20 /* receive from below */
+#define PRU_PROTOSEND 21 /* send to below */
+/* end for protocol's internal use */
+#define PRU_SEND_EOF 22 /* send and close */
+#define PRU_NREQ 22
-void pfctlinput(int, struct sockaddr *);
-void pfctlinput2(int, struct sockaddr *, void *);
-struct protosw *pffindproto(int family, int protocol, int type);
-struct protosw *pffindproto_locked(int family, int protocol, int type);
-struct protosw *pffindtype(int family, int type);
+#ifdef PRUREQUESTS
+char *prurequests[] = {
+ "ATTACH", "DETACH", "BIND", "LISTEN",
+ "CONNECT", "ACCEPT", "DISCONNECT", "SHUTDOWN",
+ "RCVD", "SEND", "ABORT", "CONTROL",
+ "SENSE", "RCVOOB", "SENDOOB", "SOCKADDR",
+ "PEERADDR", "CONNECT2", "FASTTIMO", "SLOWTIMO",
+ "PROTORCV", "PROTOSEND", "SEND_EOF",
+};
+#endif /* PRUREQUESTS */
+#endif /* BSD_KERNEL_PRIVATE */
-extern int net_add_proto(struct protosw *, struct domain *);
-extern int net_del_proto(int, int, struct domain *);
+struct stat;
+struct ucred;
+struct uio;
+struct recv_msg_elem;
-__END_DECLS
+#ifdef XNU_KERNEL_PRIVATE
+/*
+ * Legacy user-protocol hooks.
+ *
+ * NOTE: Do not modify this structure, as there are modules outside of xnu
+ * which rely on the size and layout for binary compatibility. This structure
+ * is simply used by the protosw_old structure. Internally, user-protocol
+ * hooks use the private variant of pr_usrreqs defined down below.
+ */
+struct pr_usrreqs_old {
+#else
+struct pr_usrreqs {
+#endif /* !XNU_KERNEL_PRIVATE */
+ int (*pru_abort)(struct socket *so);
+ int (*pru_accept)(struct socket *so, struct sockaddr **nam);
+ int (*pru_attach)(struct socket *so, int proto, struct proc *p);
+ int (*pru_bind)(struct socket *so, struct sockaddr *nam,
+ struct proc *p);
+ int (*pru_connect)(struct socket *so, struct sockaddr *nam,
+ struct proc *p);
+ int (*pru_connect2)(struct socket *so1, struct socket *so2);
+ int (*pru_control)(struct socket *so, u_long cmd, caddr_t data,
+ struct ifnet *ifp, struct proc *p);
+ int (*pru_detach)(struct socket *so);
+ int (*pru_disconnect)(struct socket *so);
+ int (*pru_listen)(struct socket *so, struct proc *p);
+ int (*pru_peeraddr)(struct socket *so, struct sockaddr **nam);
+ int (*pru_rcvd)(struct socket *so, int flags);
+ int (*pru_rcvoob)(struct socket *so, struct mbuf *m, int flags);
+ int (*pru_send)(struct socket *so, int flags, struct mbuf *m,
+ struct sockaddr *addr, struct mbuf *control,
+ struct proc *p);
+ int (*pru_sense)(struct socket *so, void *sb, int isstat64);
+ int (*pru_shutdown)(struct socket *so);
+ int (*pru_sockaddr)(struct socket *so, struct sockaddr **nam);
+ int (*pru_sosend)(struct socket *so, struct sockaddr *addr,
+ struct uio *uio, struct mbuf *top, struct mbuf *control,
+ int flags);
+ int (*pru_soreceive)(struct socket *so, struct sockaddr **paddr,
+ struct uio *uio, struct mbuf **mp0, struct mbuf **controlp,
+ int *flagsp);
+ int (*pru_sopoll)(struct socket *so, int events,
+ struct ucred *cred, void *);
+};
-/* Temp hack to link static domains together */
+#ifdef XNU_KERNEL_PRIVATE
+/*
+ * If the ordering here looks odd, that's because it's alphabetical. These
+ * should eventually be merged back into struct protosw.
+ *
+ * Internal, private and extendable representation of pr_usrreqs.
+ *
+ * NOTE: When adding new ones, also add default callbacks in pru_sanitize().
+ */
+struct pr_usrreqs {
+ uint32_t pru_flags; /* see PRUF flags below */
+ int (*pru_abort)(struct socket *);
+ int (*pru_accept)(struct socket *, struct sockaddr **);
+ int (*pru_attach)(struct socket *, int proto, struct proc *);
+ int (*pru_bind)(struct socket *, struct sockaddr *, struct proc *);
+ int (*pru_connect)(struct socket *, struct sockaddr *,
+ struct proc *);
+ int (*pru_connect2)(struct socket *, struct socket *);
+ int (*pru_connectx)(struct socket *, struct sockaddr *,
+ struct sockaddr *, struct proc *, uint32_t,
+ sae_associd_t, sae_connid_t *, uint32_t, void *, uint32_t,
+ struct uio *, user_ssize_t *);
+ int (*pru_control)(struct socket *, u_long, caddr_t,
+ struct ifnet *, struct proc *);
+ int (*pru_detach)(struct socket *);
+ int (*pru_disconnect)(struct socket *);
+ int (*pru_disconnectx)(struct socket *,
+ sae_associd_t, sae_connid_t);
+ int (*pru_listen)(struct socket *, struct proc *);
+ int (*pru_peeraddr)(struct socket *, struct sockaddr **);
+ int (*pru_rcvd)(struct socket *, int);
+ int (*pru_rcvoob)(struct socket *, struct mbuf *, int);
+ int (*pru_send)(struct socket *, int, struct mbuf *,
+ struct sockaddr *, struct mbuf *, struct proc *);
+ int (*pru_send_list)(struct socket *, int, struct mbuf *,
+ struct sockaddr *, struct mbuf *, struct proc *);
+#define PRUS_OOB 0x1
+#define PRUS_EOF 0x2
+#define PRUS_MORETOCOME 0x4
+ int (*pru_sense)(struct socket *, void *, int);
+ int (*pru_shutdown)(struct socket *);
+ int (*pru_sockaddr)(struct socket *, struct sockaddr **);
+ int (*pru_sopoll)(struct socket *, int, struct ucred *, void *);
+ int (*pru_soreceive)(struct socket *, struct sockaddr **,
+ struct uio *, struct mbuf **, struct mbuf **, int *);
+ int (*pru_soreceive_list)(struct socket *, struct recv_msg_elem *, u_int,
+ int *);
+ int (*pru_sosend)(struct socket *, struct sockaddr *,
+ struct uio *, struct mbuf *, struct mbuf *, int);
+ int (*pru_sosend_list)(struct socket *, struct uio **, u_int, int);
+ int (*pru_socheckopt)(struct socket *, struct sockopt *);
+ int (*pru_preconnect)(struct socket *so);
+};
-#define LINK_PROTOS(psw) \
-static void link_ ## psw ## _protos() \
-{ \
- int i; \
- \
- for (i=0; i < ((sizeof(psw)/sizeof(psw[0])) - 1); i++) \
- psw[i].pr_next = &psw[i + 1]; \
-}
+/* Values for pru_flags */
+#define PRUF_OLD 0x10000000 /* added via net_add_proto */
-#endif
+#ifdef BSD_KERNEL_PRIVATE
+/*
+ * For faster access than net_uptime(), bypassing the initialization.
+ */
+extern u_int64_t _net_uptime;
+#endif /* BSD_KERNEL_PRIVATE */
+#endif /* XNU_KERNEL_PRIVATE */
-#endif /* PRIVATE */
-#endif /* !_SYS_PROTOSW_H_ */
+__BEGIN_DECLS
+extern int pru_abort_notsupp(struct socket *so);
+extern int pru_accept_notsupp(struct socket *so, struct sockaddr **nam);
+extern int pru_attach_notsupp(struct socket *so, int proto, struct proc *p);
+extern int pru_bind_notsupp(struct socket *so, struct sockaddr *nam,
+ struct proc *p);
+extern int pru_connect_notsupp(struct socket *so, struct sockaddr *nam,
+ struct proc *p);
+extern int pru_connect2_notsupp(struct socket *so1, struct socket *so2);
+#ifdef XNU_KERNEL_PRIVATE
+extern int pru_connectx_notsupp(struct socket *, struct sockaddr *,
+ struct sockaddr *, struct proc *, uint32_t, sae_associd_t,
+ sae_connid_t *, uint32_t, void *, uint32_t, struct uio *, user_ssize_t *);
+extern int pru_disconnectx_notsupp(struct socket *, sae_associd_t,
+ sae_connid_t);
+extern int pru_socheckopt_null(struct socket *, struct sockopt *);
+#endif /* XNU_KERNEL_PRIVATE */
+extern int pru_control_notsupp(struct socket *so, u_long cmd, caddr_t data,
+ struct ifnet *ifp, struct proc *p);
+extern int pru_detach_notsupp(struct socket *so);
+extern int pru_disconnect_notsupp(struct socket *so);
+extern int pru_listen_notsupp(struct socket *so, struct proc *p);
+extern int pru_peeraddr_notsupp(struct socket *so, struct sockaddr **nam);
+extern int pru_rcvd_notsupp(struct socket *so, int flags);
+extern int pru_rcvoob_notsupp(struct socket *so, struct mbuf *m, int flags);
+extern int pru_send_notsupp(struct socket *so, int flags, struct mbuf *m,
+ struct sockaddr *addr, struct mbuf *control, struct proc *p);
+extern int pru_send_list_notsupp(struct socket *so, int flags, struct mbuf *m,
+ struct sockaddr *addr, struct mbuf *control, struct proc *p);
+extern int pru_sense_null(struct socket *so, void * sb, int isstat64);
+extern int pru_shutdown_notsupp(struct socket *so);
+extern int pru_sockaddr_notsupp(struct socket *so, struct sockaddr **nam);
+extern int pru_sosend_notsupp(struct socket *so, struct sockaddr *addr,
+ struct uio *uio, struct mbuf *top, struct mbuf *control, int flags);
+extern int pru_sosend_list_notsupp(struct socket *so, struct uio **uio,
+ u_int, int flags);
+extern int pru_soreceive_notsupp(struct socket *so,
+ struct sockaddr **paddr, struct uio *uio, struct mbuf **mp0,
+ struct mbuf **controlp, int *flagsp);
+extern int pru_soreceive_list_notsupp(struct socket *, struct recv_msg_elem *, u_int,
+ int *);
+extern int pru_sopoll_notsupp(struct socket *so, int events,
+ struct ucred *cred, void *);
+#ifdef XNU_KERNEL_PRIVATE
+extern void pru_sanitize(struct pr_usrreqs *);
+extern void domaininit(void);
+extern void domainfin(void);
+extern void pfctlinput(int, struct sockaddr *);
+extern void pfctlinput2(int, struct sockaddr *, void *);
+extern struct protosw *pffindproto_locked(int, int, int);
+extern struct protosw *pffindprotonotype(int, int);
+extern struct protosw *pffindtype(int, int);
+extern struct protosw_old *pffindproto_old(int, int, int);
+extern int net_add_proto(struct protosw *, struct domain *, int)
+__XNU_INTERNAL(net_add_proto);
+extern void net_init_proto(struct protosw *, struct domain *);
+extern int net_del_proto(int, int, struct domain *)
+__XNU_INTERNAL(net_del_proto);
+extern int net_add_proto_old(struct protosw_old *, struct domain_old *);
+extern int net_del_proto_old(int, int, struct domain_old *);
+extern void net_update_uptime(void);
+extern void net_update_uptime_with_time(const struct timeval *);
+extern u_int64_t net_uptime(void);
+extern u_int64_t net_uptime_ms(void);
+extern void net_uptime2timeval(struct timeval *);
+extern struct protosw *pffindproto(int family, int protocol, int type)
+__XNU_INTERNAL(pffindproto);
+#else
+extern int net_add_proto(struct protosw *, struct domain *);
+extern int net_del_proto(int, int, struct domain *);
+extern struct protosw *pffindproto(int family, int protocol, int type);
+#endif /* XNU_KERNEL_PRIVATE */
+__END_DECLS
+#endif /* KERNEL_PRIVATE */
+#endif /* !_SYS_PROTOSW_H_ */
projects / apple / xnu.git / blobdiff