xnu-2782.40.9.tar.gz

[apple/xnu.git] / pexpert / i386 / pe_serial.c

diff --git a/pexpert/i386/pe_serial.c b/pexpert/i386/pe_serial.c
index 0d4890c57aefb70c0e21261ab0c959bcd05f7c9a..f056487a044ce0a798318ad729fd744266a7c829 100644 (file)
--- a/pexpert/i386/pe_serial.c
+++ b/pexpert/i386/pe_serial.c
@@ -1,31 +1,29 @@
 /*
- * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
+ * Copyright (c) 2000-2006 Apple Computer, Inc. All rights reserved.
  *
- * @APPLE_LICENSE_OSREFERENCE_HEADER_START@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
  * 
- * This file contains Original Code and/or Modifications of Original Code 
- * as defined in and that are subject to the Apple Public Source License 
- * Version 2.0 (the 'License'). You may not use this file except in 
- * compliance with the License.  The rights granted to you under the 
- * License may not be used to create, or enable the creation or 
- * redistribution of, unlawful or unlicensed copies of an Apple operating 
- * system, or to circumvent, violate, or enable the circumvention or 
- * violation of, any terms of an Apple operating system software license 
- * agreement.
- *
- * Please obtain a copy of the License at 
- * http://www.opensource.apple.com/apsl/ and read it before using this 
- * file.
- *
- * The Original Code and all software distributed under the License are 
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER 
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, 
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, 
- * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. 
- * Please see the License for the specific language governing rights and 
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ * 
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ * 
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
  * limitations under the License.
- *
- * @APPLE_LICENSE_OSREFERENCE_HEADER_END@
+ * 
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  */
 
 /*
@@ -36,10 +34,6 @@
 #include <pexpert/protos.h>
 #include <pexpert/pexpert.h>
 
-void   serial_putc(char);
-int    serial_getc(void);
-int    serial_init(void);
-
 /* standard port addresses */
 enum {
     COM1_PORT_ADDR = 0x3f8,
@@ -58,7 +52,8 @@ enum {
     UART_LCR = 3,  /* line control register         */
     UART_MCR = 4,  /* modem control register        */
     UART_LSR = 5,  /* line status register          */
-    UART_MSR = 6   /* modem status register         */
+    UART_MSR = 6,  /* modem status register         */
+    UART_SCR = 7   /* scratch register              */
 };
 
 enum {
@@ -96,14 +91,12 @@ static int uart_initted = 0;   /* 1 if init'ed */
 static int
 uart_probe( void )
 {
-    /* Verify that the Divisor Register is accessible */
-
-    WRITE( LCR, UART_LCR_DLAB );
-    WRITE( DLL, 0x5a );
-    if (READ(DLL) != 0x5a) return 0;
-    WRITE( DLL, 0xa5 );
-    if (READ(DLL) != 0xa5) return 0;
-    WRITE( LCR, 0x00 );
+    /* Verify that the Scratch Register is accessible */
+
+    WRITE( SCR, 0x5a );
+    if (READ(SCR) != 0x5a) return 0;
+    WRITE( SCR, 0xa5 );
+    if (READ(SCR) != 0xa5) return 0;
     return 1;
 }
 
@@ -166,7 +159,7 @@ int serial_init( void )
 {
     unsigned serial_baud_rate = 0;
        
-    if ( /*uart_initted ||*/ uart_probe() == 0 ) return 0;
+    if ( uart_probe() == 0 ) return 0;
 
     /* Disable hardware interrupts */
 
@@ -183,7 +176,7 @@ int serial_init( void )
 
     /* Set baud rate - use the supplied boot-arg if available */
 
-    if (PE_parse_boot_arg("serialbaud", &serial_baud_rate))
+    if (PE_parse_boot_argn("serialbaud", &serial_baud_rate, sizeof (serial_baud_rate)))
     {
            /* Valid divisor? */
            if (!((UART_CLOCK / 16) % serial_baud_rate)) {
@@ -208,7 +201,6 @@ int serial_init( void )
 void serial_putc( char c )
 {
     uart_putc(c);
-    if (c == '\n') uart_putc('\r');
 }
 
 int serial_getc( void )