xnu-792.17.14.tar.gz

[apple/xnu.git] / pexpert / i386 / pe_serial.c

diff --git a/pexpert/i386/pe_serial.c b/pexpert/i386/pe_serial.c
index 0d4890c57aefb70c0e21261ab0c959bcd05f7c9a..ff104bba5d64fddbe97f4fa4031bc50f6054a1a2 100644 (file)
--- a/pexpert/i386/pe_serial.c
+++ b/pexpert/i386/pe_serial.c
@@ -1,31 +1,29 @@
 /*
  * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
  *
- * @APPLE_LICENSE_OSREFERENCE_HEADER_START@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
  * 
- * This file contains Original Code and/or Modifications of Original Code 
- * as defined in and that are subject to the Apple Public Source License 
- * Version 2.0 (the 'License'). You may not use this file except in 
- * compliance with the License.  The rights granted to you under the 
- * License may not be used to create, or enable the creation or 
- * redistribution of, unlawful or unlicensed copies of an Apple operating 
- * system, or to circumvent, violate, or enable the circumvention or 
- * violation of, any terms of an Apple operating system software license 
- * agreement.
- *
- * Please obtain a copy of the License at 
- * http://www.opensource.apple.com/apsl/ and read it before using this 
- * file.
- *
- * The Original Code and all software distributed under the License are 
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER 
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, 
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, 
- * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. 
- * Please see the License for the specific language governing rights and 
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ * 
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ * 
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
  * limitations under the License.
- *
- * @APPLE_LICENSE_OSREFERENCE_HEADER_END@
+ * 
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  */
 
 /*
@@ -75,18 +73,12 @@ enum {
 };
 
 enum {
-    UART_LSR_DR    = 0x01,
-    UART_LSR_OE    = 0x02,
-    UART_LSR_PE    = 0x04,
-    UART_LSR_FE    = 0x08,
     UART_LSR_THRE  = 0x20
 };
 
-static unsigned uart_baud_rate = 115200;
+#define UART_BAUD_RATE  115200
 #define UART_PORT_ADDR  COM1_PORT_ADDR
 
-#define UART_CLOCK  1843200   /* 1.8432 MHz clock */
-
 #define WRITE(r, v)  outb(UART_PORT_ADDR + UART_##r, v)
 #define READ(r)      inb(UART_PORT_ADDR + UART_##r)
 #define DELAY(x)     { volatile int _d_; for (_d_ = 0; _d_ < (10000*x); _d_++) ; }
@@ -110,6 +102,8 @@ uart_probe( void )
 static void
 uart_set_baud_rate( unsigned long baud_rate )
 {
+    #define UART_CLOCK  1843200   /* 1.8432 MHz clock */
+
     const unsigned char lcr = READ( LCR );
     unsigned long       div;
 
@@ -132,40 +126,8 @@ uart_putc( char c )
     WRITE( THR, c );
 }
 
-static int
-uart_getc( void )
-{
-    /*
-     * This function returns:
-     * -1 : no data
-     * -2 : receiver error
-     * >0 : character received
-     */
-
-    unsigned char lsr;
-
-    if (!uart_initted) return -1;
-
-    lsr = READ( LSR );
-
-    if ( lsr & (UART_LSR_FE | UART_LSR_PE | UART_LSR_OE) )
-    {
-        READ( RBR ); /* discard */
-        return -2;
-    }
-
-    if ( lsr & UART_LSR_DR )
-    {
-        return READ( RBR );
-    }
-
-    return -1;
-}
-
 int serial_init( void )
 {
-    unsigned serial_baud_rate = 0;
-       
     if ( /*uart_initted ||*/ uart_probe() == 0 ) return 0;
 
     /* Disable hardware interrupts */
@@ -181,16 +143,9 @@ int serial_init( void )
 
     WRITE( LCR, UART_LCR_8BITS );
 
-    /* Set baud rate - use the supplied boot-arg if available */
+    /* Set baud rate */
 
-    if (PE_parse_boot_arg("serialbaud", &serial_baud_rate))
-    {
-           /* Valid divisor? */
-           if (!((UART_CLOCK / 16) % serial_baud_rate)) {
-                   uart_baud_rate = serial_baud_rate;
-           }
-    }
-    uart_set_baud_rate( uart_baud_rate );
+    uart_set_baud_rate( UART_BAUD_RATE );
 
     /* Assert DTR# and RTS# lines (OUT2?) */
 
@@ -213,5 +168,5 @@ void serial_putc( char c )
 
 int serial_getc( void )
 {
-    return uart_getc();
+    return 0;  /* not supported */
 }