/*
* Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
*
- * @APPLE_LICENSE_HEADER_START@
- *
- * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved.
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
* This file contains Original Code and/or Modifications of Original Code
* as defined in and that are subject to the Apple Public Source License
* Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ *
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
*
* The Original Code and all software distributed under the License are
* distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* Please see the License for the specific language governing rights and
* limitations under the License.
*
- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
/* Copyright (c) 1992 NeXT Computer, Inc. All rights reserved.
*
#include <sys/param.h>
#include <sys/tty.h>
-#include <dev/i386/cons.h>
+#include <machine/cons.h>
#include <sys/conf.h>
#include <sys/systm.h>
#include <sys/uio.h>
#include <sys/time.h>
#include <dev/kmreg_com.h>
#include <pexpert/pexpert.h>
+#include <pexpert/i386/boot.h>
+
+extern int hz;
+
+extern void cnputcusr(char);
+extern int cngetc(void);
+
+void kminit(void);
+void cons_cinput(char ch);
/*
* 'Global' variables, shared only by this file and conf.c.
*/
-extern struct tty cons;
-struct tty *km_tty[1] = { &cons };
+struct tty *km_tty[1] = { 0 };
/*
* this works early on, after initialize_screen() but before autoconf (and thus
extern void KeyboardOpen(void);
-int kminit()
+void
+kminit(void)
{
- cons.t_dev = makedev(12, 0);
+ km_tty[0] = ttymalloc();
+ km_tty[0]->t_dev = makedev(12, 0);
initialized = 1;
}
+
/*
* cdevsw interface to km driver.
*/
int
-kmopen(
- dev_t dev,
- int flag,
- int devtype,
- struct proc *pp)
+kmopen(dev_t dev, int flag, __unused int devtype, proc_t pp)
{
- int rtn;
int unit;
struct tty *tp;
struct winsize *wp;
if(unit >= 1)
return (ENXIO);
- tp = (struct tty *)&cons;
+ tp = km_tty[unit];
+
+ tty_lock(tp);
+
tp->t_oproc = kmstart;
tp->t_param = NULL;
tp->t_dev = dev;
tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
termioschars(&tp->t_termios);
ttsetwater(tp);
- } else if ((tp->t_state & TS_XCLUDE) && pp->p_ucred->cr_uid != 0)
- return EBUSY;
+ } else if ((tp->t_state & TS_XCLUDE) && proc_suser(pp)) {
+ ret = EBUSY;
+ goto out;
+ }
tp->t_state |= TS_CARR_ON; /* lie and say carrier exists and is on. */
+
ret = ((*linesw[tp->t_line].l_open)(dev, tp));
{
PE_Video video;
wp = &tp->t_winsize;
- /* Magic numbers. These are CHARWIDTH and CHARHEIGHT
+ /*
+ * Magic numbers. These are CHARWIDTH and CHARHEIGHT
* from pexpert/i386/video_console.c
*/
wp->ws_xpixel = 8;
wp->ws_ypixel = 16;
+ tty_unlock(tp); /* XXX race window */
+
if (flag & O_POPUP)
PE_initialize_console(0, kPETextScreen);
bzero(&video, sizeof(video));
PE_current_console(&video);
- if( video.v_width != 0 && video.v_height != 0 ) {
+
+ tty_lock(tp);
+
+ if( video.v_display == FB_TEXT_MODE && video.v_width != 0 && video.v_height != 0 ) {
wp->ws_col = video.v_width / wp->ws_xpixel;
wp->ws_row = video.v_height / wp->ws_ypixel;
} else {
wp->ws_row = 36;
}
}
+
+out:
+ tty_unlock(tp);
+
return ret;
}
int
-kmclose(
- dev_t dev,
- int flag,
- int mode,
- struct proc *p)
+kmclose(dev_t dev, int flag, __unused int mode, __unused proc_t p)
{
-
- struct tty *tp;
+ int ret;
+ struct tty *tp = km_tty[minor(dev)];
- tp = &cons;
- (*linesw[tp->t_line].l_close)(tp,flag);
+ tty_lock(tp);
+ ret = (*linesw[tp->t_line].l_close)(tp,flag);
ttyclose(tp);
- return (0);
+ tty_unlock(tp);
+
+ return (ret);
}
int
-kmread(
- dev_t dev,
- struct uio *uio,
- int ioflag)
+kmread(dev_t dev, struct uio *uio, int ioflag)
{
- register struct tty *tp;
-
- tp = &cons;
- return ((*linesw[tp->t_line].l_read)(tp, uio, ioflag));
+ int ret;
+ struct tty *tp = km_tty[minor(dev)];
+
+ tty_lock(tp);
+ ret = (*linesw[tp->t_line].l_read)(tp, uio, ioflag);
+ tty_unlock(tp);
+
+ return (ret);
}
int
-kmwrite(
- dev_t dev,
- struct uio *uio,
- int ioflag)
+kmwrite(dev_t dev, struct uio *uio, int ioflag)
{
- register struct tty *tp;
-
- tp = &cons;
- return ((*linesw[tp->t_line].l_write)(tp, uio, ioflag));
+ int ret;
+ struct tty *tp = km_tty[minor(dev)];
+
+ tty_lock(tp);
+ ret = (*linesw[tp->t_line].l_write)(tp, uio, ioflag);
+ tty_unlock(tp);
+
+ return (ret);
}
int
-kmioctl(
- dev_t dev,
- int cmd,
- caddr_t data,
- int flag,
- struct proc *p)
+kmioctl(dev_t dev, u_long cmd, caddr_t data, int flag, proc_t p)
{
- int error;
- struct tty *tp = &cons;
+ int error = 0;
+ struct tty *tp = km_tty[minor(dev)];
struct winsize *wp;
+
+ tty_lock(tp);
switch (cmd) {
-
-
-
case KMIOCSIZE:
wp = (struct winsize *)data;
*wp = tp->t_winsize;
- return 0;
+ break;
case TIOCSWINSZ:
/* Prevent changing of console size --
* this ensures that login doesn't revert to the
* termcap-defined size
*/
- return EINVAL;
+ error = EINVAL;
+ break;
/* Bodge in the CLOCAL flag as the km device is always local */
- case TIOCSETA:
- case TIOCSETAW:
- case TIOCSETAF: {
- register struct termios *t = (struct termios *)data;
- t->c_cflag |= CLOCAL;
- /* No Break */
- }
- default:
- error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
- if (error >= 0) {
- return error;
- }
- error = ttioctl (tp, cmd, data, flag, p);
- if (error >= 0) {
- return error;
+ case TIOCSETA_32:
+ case TIOCSETAW_32:
+ case TIOCSETAF_32:
+ {
+ struct termios32 *t = (struct termios32 *)data;
+ t->c_cflag |= CLOCAL;
+ /* No Break */
}
- else {
- return ENOTTY;
+ goto fallthrough;
+ case TIOCSETA_64:
+ case TIOCSETAW_64:
+ case TIOCSETAF_64:
+ {
+ struct user_termios *t = (struct user_termios *)data;
+ t->c_cflag |= CLOCAL;
+ /* No Break */
}
+fallthrough:
+ default:
+ error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
+ if (ENOTTY != error)
+ break;
+ error = ttioctl_locked(tp, cmd, data, flag, p);
+ break;
}
-}
-
-int
-kmputc(
- int c)
-{
- if( disableConsoleOutput)
- return( 0);
+ tty_unlock(tp);
- if(!initialized)
- return( 0);
-
- if(c == '\n')
- cnputc('\r');
-
- cnputc(c);
-
- return 0;
+ return (error);
}
+/*
+ * kmputc
+ *
+ * Output a character to the serial console driver via cnputcusr(),
+ * which is exported by that driver.
+ *
+ * Locks: Assumes tp in the calling tty driver code is locked on
+ * entry, remains locked on exit
+ *
+ * Notes: Called from kmoutput(); giving the locking output
+ * assumptions here, this routine should be static (and
+ * inlined, given there is only one call site).
+ */
int
-kmgetc(
- dev_t dev)
+kmputc(__unused dev_t dev, char c)
{
- int c;
-
- c= cngetc();
-
- if (c == '\r') {
- c = '\n';
+ if(!disableConsoleOutput && initialized) {
+ /* OCRNL */
+ if(c == '\n')
+ cnputcusr('\r');
+ cnputcusr(c);
}
- cnputc(c);
- return c;
-}
-int
-kmgetc_silent(
- dev_t dev)
-{
- int c;
-
- c= cngetc();
- if (c == '\r') {
- c = '\n';
- }
- return c;
+ return (0);
}
+
/*
* Callouts from linesw.
*/
#define KM_LOWAT_DELAY ((ns_time_t)1000)
+/*
+ * t_oproc for this driver; called from within the line discipline
+ *
+ * Locks: Assumes tp is locked on entry, remains locked on exit
+ */
static void
-kmstart(
- struct tty *tp)
+kmstart(struct tty *tp)
{
- extern int hz;
if (tp->t_state & (TS_TIMEOUT | TS_BUSY | TS_TTSTOP))
goto out;
if (tp->t_outq.c_cc == 0)
goto out;
tp->t_state |= TS_BUSY;
- if (tp->t_outq.c_cc > tp->t_lowat) {
- /*
- * Start immediately.
- */
- kmoutput(tp);
- }
- else {
- /*
- * Wait a bit...
- */
-#if 0
- /* FIXME */
- timeout(kmtimeout, tp, hz);
-#else
- kmoutput(tp);
-#endif
- }
+ kmoutput(tp);
+ return;
+
out:
- ttwwakeup(tp);
+ (*linesw[tp->t_line].l_start)(tp);
+ return;
}
+/*
+ * One-shot output retry timeout from kmoutput(); re-calls kmoutput() at
+ * intervals until the output queue for the tty is empty, at which point
+ * the timeout is not rescheduled by kmoutput()
+ *
+ * This function must take the tty_lock() around the kmoutput() call; it
+ * ignores the return value.
+ */
static void
kmtimeout(void *arg)
{
- boolean_t funnel_state;
- struct tty *tp = (struct tty *) arg;
-
- funnel_state = thread_funnel_set(kernel_flock, TRUE);
- kmoutput(tp);
- (void) thread_funnel_set(kernel_flock, funnel_state);
-
+ struct tty *tp = (struct tty *)arg;
+ tty_lock(tp);
+ (void)kmoutput(tp);
+ tty_unlock(tp);
}
+
+/*
+ * kmoutput
+ *
+ * Locks: Assumes tp is locked on entry, remains locked on exit
+ *
+ * Notes: Called from kmstart() and kmtimeout(); kmtimeout() is a
+ * timer initiated by this routine to deal with pending
+ * output not yet flushed (output is flushed at a maximum
+ * of sizeof(buf) charatcers at a time before dropping into
+ * the timeout code).
+ */
static int
-kmoutput(
- struct tty *tp)
+kmoutput(struct tty *tp)
{
- /*
- * FIXME - to be grokked...copied from m68k km.c.
- */
- char buf[80];
- char *cp;
+ unsigned char buf[80]; /* buffer; limits output per call */
+ unsigned char *cp;
int cc = -1;
- extern int hz;
+ /* While there is data available to be output... */
while (tp->t_outq.c_cc > 0) {
cc = ndqb(&tp->t_outq, 0);
if (cc == 0)
break;
- cc = min(cc, sizeof buf);
+ /*
+ * attempt to output as many characters as are available,
+ * up to the available transfer buffer size.
+ */
+ cc = min(cc, sizeof(buf));
+ /* copy the output queue contents to the buffer */
(void) q_to_b(&tp->t_outq, buf, cc);
for (cp = buf; cp < &buf[cc]; cp++) {
- kmputc(*cp & 0x7f);
+ /* output the buffer one charatcer at a time */
+ kmputc(tp->t_dev, *cp & 0x7f);
}
}
+ /*
+ * XXX This is likely not necessary, as the tty output queue is not
+ * XXX writeable while we hold the tty_lock().
+ */
if (tp->t_outq.c_cc > 0) {
timeout(kmtimeout, tp, hz);
}
tp->t_state &= ~TS_BUSY;
- ttwwakeup(tp);
+ /* Start the output processing for the line discipline */
+ (*linesw[tp->t_line].l_start)(tp);
return 0;
}
+
+
+/*
+ * cons_cinput
+ *
+ * Driver character input from the polled mode serial console driver calls
+ * this routine to input a character from the serial driver into the tty
+ * line discipline specific input processing receiv interrupt routine,
+ * l_rint().
+ *
+ * Locks: Assumes that the tty_lock() is NOT held on the tp, so a
+ * serial driver should NOT call this function as a result
+ * of being called from a function which already holds the
+ * lock; ECHOE will be handled at the line discipline, if
+ * output echo processing is going to occur.
+ */
+void
cons_cinput(char ch)
{
- struct tty *tp = &cons;
- boolean_t funnel_state;
+ struct tty *tp = km_tty[0]; /* XXX */
-
+ tty_lock(tp);
(*linesw[tp->t_line].l_rint) (ch, tp);
-
+ tty_unlock(tp);
}
-
projects / apple / xnu.git / blobdiff