/*
- * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
+ * Copyright (c) 2000-2012 Apple Inc. All rights reserved.
*
- * @APPLE_LICENSE_HEADER_START@
- *
- * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved.
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
* This file contains Original Code and/or Modifications of Original Code
* as defined in and that are subject to the Apple Public Source License
* Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ *
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
*
* The Original Code and all software distributed under the License are
* distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* Please see the License for the specific language governing rights and
* limitations under the License.
*
- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
/*
* @OSF_COPYRIGHT@
/*
* File: i386/rtclock.c
* Purpose: Routines for handling the machine dependent
- * real-time clock. This clock is generated by
- * the Intel 8254 Programmable Interval Timer.
+ * real-time clock. Historically, this clock is
+ * generated by the Intel 8254 Programmable Interval
+ * Timer, but local apic timers are now used for
+ * this purpose with the master time reference being
+ * the cpu clock counted by the timestamp MSR.
*/
-#include <cpus.h>
-#include <platforms.h>
-#include <mach_kdb.h>
#include <mach/mach_types.h>
-#include <kern/cpu_number.h>
#include <kern/cpu_data.h>
+#include <kern/cpu_number.h>
#include <kern/clock.h>
#include <kern/host_notify.h>
#include <kern/macro_help.h>
#include <kern/misc_protos.h>
#include <kern/spl.h>
-#include <machine/mach_param.h> /* HZ */
+#include <kern/assert.h>
+#include <kern/timer_queue.h>
#include <mach/vm_prot.h>
#include <vm/pmap.h>
#include <vm/vm_kern.h> /* for kernel_map */
-#include <i386/ipl.h>
-#include <i386/pit.h>
-#include <i386/pio.h>
-#include <i386/misc_protos.h>
-#include <i386/rtclock_entries.h>
-#include <i386/hardclock_entries.h>
-#include <i386/proc_reg.h>
+#include <architecture/i386/pio.h>
#include <i386/machine_cpu.h>
+#include <i386/cpuid.h>
+#include <i386/cpu_threads.h>
+#include <i386/mp.h>
+#include <i386/machine_routines.h>
+#include <i386/pal_routines.h>
+#include <i386/proc_reg.h>
+#include <i386/misc_protos.h>
#include <pexpert/pexpert.h>
-
-#define DISPLAYENTER(x) printf("[RTCLOCK] entering " #x "\n");
-#define DISPLAYEXIT(x) printf("[RTCLOCK] leaving " #x "\n");
-#define DISPLAYVALUE(x,y) printf("[RTCLOCK] " #x ":" #y " = 0x%08x \n",y);
-
-int sysclk_config(void);
-
-int sysclk_init(void);
-
-kern_return_t sysclk_gettime(
- mach_timespec_t *cur_time);
-
-kern_return_t sysclk_getattr(
- clock_flavor_t flavor,
- clock_attr_t attr,
- mach_msg_type_number_t *count);
-
-kern_return_t sysclk_setattr(
- clock_flavor_t flavor,
- clock_attr_t attr,
- mach_msg_type_number_t count);
-
-void sysclk_setalarm(
- mach_timespec_t *alarm_time);
-
-extern void (*IOKitRegisterInterruptHook)(void *, int irq, int isclock);
-
-/*
- * Lists of clock routines.
- */
-struct clock_ops sysclk_ops = {
- sysclk_config, sysclk_init,
- sysclk_gettime, 0,
- sysclk_getattr, sysclk_setattr,
- sysclk_setalarm,
-};
-
-int calend_config(void);
-
-int calend_init(void);
-
-kern_return_t calend_gettime(
- mach_timespec_t *cur_time);
-
-kern_return_t calend_getattr(
- clock_flavor_t flavor,
- clock_attr_t attr,
- mach_msg_type_number_t *count);
-
-struct clock_ops calend_ops = {
- calend_config, calend_init,
- calend_gettime, 0,
- calend_getattr, 0,
- 0,
-};
-
-/* local data declarations */
-mach_timespec_t *RtcTime = (mach_timespec_t *)0;
-mach_timespec_t *RtcAlrm;
-clock_res_t RtcDelt;
-
-/* global data declarations */
-struct {
- uint64_t abstime;
-
- mach_timespec_t time;
- mach_timespec_t alarm_time; /* time of next alarm */
-
- mach_timespec_t calend_offset;
- boolean_t calend_is_set;
-
- int64_t calend_adjtotal;
- int32_t calend_adjdelta;
-
- uint64_t timer_deadline;
- boolean_t timer_is_set;
- clock_timer_func_t timer_expire;
-
- clock_res_t new_ires; /* pending new resolution (nano ) */
- clock_res_t intr_nsec; /* interrupt resolution (nano) */
- mach_timebase_info_data_t timebase_const;
-
- decl_simple_lock_data(,lock) /* real-time clock device lock */
-} rtclock;
-
-unsigned int clknum; /* clks per second */
-unsigned int new_clknum; /* pending clknum */
-unsigned int time_per_clk; /* time per clk in ZHZ */
-unsigned int clks_per_int; /* clks per interrupt */
-unsigned int clks_per_int_99;
-int rtc_intr_count; /* interrupt counter */
-int rtc_intr_hertz; /* interrupts per HZ */
-int rtc_intr_freq; /* interrupt frequency */
-int rtc_print_lost_tick; /* print lost tick */
-
-uint32_t rtc_cyc_per_sec; /* processor cycles per seconds */
-uint32_t rtc_quant_scale; /* used internally to convert clocks to nanos */
-
-/*
- * Macros to lock/unlock real-time clock device.
- */
-#define LOCK_RTC(s) \
-MACRO_BEGIN \
- (s) = splclock(); \
- simple_lock(&rtclock.lock); \
-MACRO_END
-
-#define UNLOCK_RTC(s) \
-MACRO_BEGIN \
- simple_unlock(&rtclock.lock); \
- splx(s); \
-MACRO_END
-
-/*
- * i8254 control. ** MONUMENT **
- *
- * The i8254 is a traditional PC device with some arbitrary characteristics.
- * Basically, it is a register that counts at a fixed rate and can be
- * programmed to generate an interrupt every N counts. The count rate is
- * clknum counts per second (see pit.h), historically 1193167 we believe.
- * Various constants are computed based on this value, and we calculate
- * them at init time for execution efficiency. To obtain sufficient
- * accuracy, some of the calculation are most easily done in floating
- * point and then converted to int.
- *
- * We want an interrupt every 10 milliseconds, approximately. The count
- * which will do that is clks_per_int. However, that many counts is not
- * *exactly* 10 milliseconds; it is a bit more or less depending on
- * roundoff. The actual time per tick is calculated and saved in
- * rtclock.intr_nsec, and it is that value which is added to the time
- * register on each tick.
- *
- * The i8254 counter can be read between interrupts in order to determine
- * the time more accurately. The counter counts down from the preset value
- * toward 0, and we have to handle the case where the counter has been
- * reset just before being read and before the interrupt has been serviced.
- * Given a count since the last interrupt, the time since then is given
- * by (count * time_per_clk). In order to minimize integer truncation,
- * we perform this calculation in an arbitrary unit of time which maintains
- * the maximum precision, i.e. such that one tick is 1.0e9 of these units,
- * or close to the precision of a 32-bit int. We then divide by this unit
- * (which doesn't lose precision) to get nanoseconds. For notation
- * purposes, this unit is defined as ZHZ = zanoseconds per nanosecond.
- *
- * This sequence to do all this is in sysclk_gettime. For efficiency, this
- * sequence also needs the value that the counter will have if it has just
- * overflowed, so we precompute that also.
- *
- * The fix for certain really old certain platforms has been removed
- * (specifically the DEC XL5100) have been observed to have problem
- * with latching the counter, and they occasionally (say, one out of
- * 100,000 times) return a bogus value. Hence, the present code reads
- * the counter twice and checks for a consistent pair of values.
- * the code was:
- * do {
- * READ_8254(val);
- * READ_8254(val2);
- * } while ( val2 > val || val2 < val - 10 );
- *
- *
- * Some attributes of the rt clock can be changed, including the
- * interrupt resolution. We default to the minimum resolution (10 ms),
- * but allow a finer resolution to be requested. The assumed frequency
- * of the clock can also be set since it appears that the actual
- * frequency of real-world hardware can vary from the nominal by
- * 200 ppm or more. When the frequency is set, the values above are
- * recomputed and we continue without resetting or changing anything else.
- */
-#define RTC_MINRES (NSEC_PER_SEC / HZ) /* nsec per tick */
-#define RTC_MAXRES (RTC_MINRES / 20) /* nsec per tick */
-#define ZANO (1000000000)
-#define ZHZ (ZANO / (NSEC_PER_SEC / HZ))
-#define READ_8254(val) { \
- outb(PITCTL_PORT, PIT_C0); \
- (val) = inb(PITCTR0_PORT); \
- (val) |= inb(PITCTR0_PORT) << 8 ; }
-
+#include <machine/limits.h>
+#include <machine/commpage.h>
+#include <sys/kdebug.h>
+#include <i386/tsc.h>
+#include <i386/rtclock_protos.h>
#define UI_CPUFREQ_ROUNDING_FACTOR 10000000
+int rtclock_init(void);
-/*
- * Forward decl.
- */
-
-void rtc_setvals( unsigned int, clock_res_t );
+uint64_t tsc_rebase_abs_time = 0;
-static void rtc_set_cyc_per_sec();
+static void rtc_set_timescale(uint64_t cycles);
+static uint64_t rtc_export_speed(uint64_t cycles);
-/* define assembly routines */
-
-
-/*
- * Inlines to get timestamp counter value.
- */
-
-inline static uint64_t
-rdtsc_64(void)
+void
+rtc_timer_start(void)
{
- uint64_t result;
- asm volatile("rdtsc": "=A" (result));
- return result;
+ /*
+ * Force a complete re-evaluation of timer deadlines.
+ */
+ x86_lcpu()->rtcDeadline = EndOfAllTime;
+ timer_resync_deadlines();
}
-// create_mul_quant_GHZ create a constant that can be used to multiply
-// the TSC by to create nanoseconds. This is a 32 bit number
-// and the TSC *MUST* have a frequency higher than 1000Mhz for this routine to work
-//
-// The theory here is that we know how many TSCs-per-sec the processor runs at. Normally to convert this
-// to nanoseconds you would multiply the current time stamp by 1000000000 (a billion) then divide
-// by TSCs-per-sec to get nanoseconds. Unfortunatly the TSC is 64 bits which would leave us with
-// 96 bit intermediate results from the dultiply that must be divided by.
-// usually thats
-// uint96 = tsc * numer
-// nanos = uint96 / denom
-// Instead, we create this quant constant and it becomes the numerator, the denominator
-// can then be 0x100000000 which makes our division as simple as forgetting the lower 32 bits
-// of the result. We can also pass this number to user space as the numer and pass 0xFFFFFFFF
-// as the denom to converting raw counts to nanos. the difference is so small as to be undetectable
-// by anything.
-// unfortunatly we can not do this for sub GHZ processors. In that case, all we do is pass the CPU
-// speed in raw as the denom and we pass in 1000000000 as the numerator. No short cuts allowed
-
-inline static uint32_t
-create_mul_quant_GHZ(uint32_t quant)
+static inline uint32_t
+_absolutetime_to_microtime(uint64_t abstime, clock_sec_t *secs, clock_usec_t *microsecs)
{
- return (uint32_t)((50000000ULL << 32) / quant);
+ uint32_t remain;
+ *secs = abstime / (uint64_t)NSEC_PER_SEC;
+ remain = (uint32_t)(abstime % (uint64_t)NSEC_PER_SEC);
+ *microsecs = remain / NSEC_PER_USEC;
+ return remain;
}
-// this routine takes a value of raw TSC ticks and applies the passed mul_quant
-// generated by create_mul_quant() This is our internal routine for creating
-// nanoseconds
-// since we don't really have uint96_t this routine basically does this....
-// uint96_t intermediate = (*value) * scale
-// return (intermediate >> 32)
-inline static uint64_t
-fast_get_nano_from_abs(uint64_t value, int scale)
+static inline void
+_absolutetime_to_nanotime(uint64_t abstime, clock_sec_t *secs, clock_usec_t *nanosecs)
{
- asm (" movl %%edx,%%esi \n\t"
- " mull %%ecx \n\t"
- " movl %%edx,%%edi \n\t"
- " movl %%esi,%%eax \n\t"
- " mull %%ecx \n\t"
- " xorl %%ecx,%%ecx \n\t"
- " addl %%edi,%%eax \n\t"
- " adcl %%ecx,%%edx "
- : "+A" (value)
- : "c" (scale)
- : "%esi", "%edi");
- return value;
+ *secs = abstime / (uint64_t)NSEC_PER_SEC;
+ *nanosecs = (clock_usec_t)(abstime % (uint64_t)NSEC_PER_SEC);
}
/*
- * this routine basically does this...
- * ts.tv_sec = nanos / 1000000000; create seconds
- * ts.tv_nsec = nanos % 1000000000; create remainder nanos
+ * Nanotime/mach_absolutime_time
+ * -----------------------------
+ * The timestamp counter (TSC) - which counts cpu clock cycles and can be read
+ * efficiently by the kernel and in userspace - is the reference for all timing.
+ * The cpu clock rate is platform-dependent and may stop or be reset when the
+ * processor is napped/slept. As a result, nanotime is the software abstraction
+ * used to maintain a monotonic clock, adjusted from an outside reference as needed.
+ *
+ * The kernel maintains nanotime information recording:
+ * - the ratio of tsc to nanoseconds
+ * with this ratio expressed as a 32-bit scale and shift
+ * (power of 2 divider);
+ * - { tsc_base, ns_base } pair of corresponding timestamps.
+ *
+ * The tuple {tsc_base, ns_base, scale, shift} is exported in the commpage
+ * for the userspace nanotime routine to read.
+ *
+ * All of the routines which update the nanotime data are non-reentrant. This must
+ * be guaranteed by the caller.
*/
-inline static mach_timespec_t
-nanos_to_timespec(uint64_t nanos)
-{
- union {
- mach_timespec_t ts;
- uint64_t u64;
- } ret;
- ret.u64 = nanos;
- asm volatile("divl %1" : "+A" (ret.u64) : "r" (NSEC_PER_SEC));
- return ret.ts;
-}
-
-// the following two routine perform the 96 bit arithmetic we need to
-// convert generic absolute<->nanoseconds
-// the multiply routine takes a uint64_t and a uint32_t and returns the result in a
-// uint32_t[3] array. the dicide routine takes this uint32_t[3] array and
-// divides it by a uint32_t returning a uint64_t
-inline static void
-longmul(uint64_t *abstime, uint32_t multiplicand, uint32_t *result)
-{
- asm volatile(
- " pushl %%ebx \n\t"
- " movl %%eax,%%ebx \n\t"
- " movl (%%eax),%%eax \n\t"
- " mull %%ecx \n\t"
- " xchg %%eax,%%ebx \n\t"
- " pushl %%edx \n\t"
- " movl 4(%%eax),%%eax \n\t"
- " mull %%ecx \n\t"
- " movl %2,%%ecx \n\t"
- " movl %%ebx,(%%ecx) \n\t"
- " popl %%ebx \n\t"
- " addl %%ebx,%%eax \n\t"
- " popl %%ebx \n\t"
- " movl %%eax,4(%%ecx) \n\t"
- " adcl $0,%%edx \n\t"
- " movl %%edx,8(%%ecx) // and save it"
- : : "a"(abstime), "c"(multiplicand), "m"(result));
-
-}
-
-inline static uint64_t
-longdiv(uint32_t *numer, uint32_t denom)
+static inline void
+rtc_nanotime_set_commpage(pal_rtc_nanotime_t *rntp)
{
- uint64_t result;
- asm volatile(
- " pushl %%ebx \n\t"
- " movl %%eax,%%ebx \n\t"
- " movl 8(%%eax),%%edx \n\t"
- " movl 4(%%eax),%%eax \n\t"
- " divl %%ecx \n\t"
- " xchg %%ebx,%%eax \n\t"
- " movl (%%eax),%%eax \n\t"
- " divl %%ecx \n\t"
- " xchg %%ebx,%%edx \n\t"
- " popl %%ebx \n\t"
- : "=A"(result) : "a"(numer),"c"(denom));
- return result;
+ commpage_set_nanotime(rntp->tsc_base, rntp->ns_base, rntp->scale, rntp->shift);
}
-#define PIT_Mode4 0x08 /* turn on mode 4 one shot software trigger */
-
-// Enable or disable timer 2.
-inline static void
-enable_PIT2()
-{
- asm volatile(
- " inb $97,%%al \n\t"
- " and $253,%%al \n\t"
- " or $1,%%al \n\t"
- " outb %%al,$97 \n\t"
- : : : "%al" );
-}
-
-inline static void
-disable_PIT2()
-{
- asm volatile(
- " inb $97,%%al \n\t"
- " and $253,%%al \n\t"
- " outb %%al,$97 \n\t"
- : : : "%al" );
-}
-
-// ctimeRDTSC() routine sets up counter 2 to count down 1/20 of a second
-// it pauses until the value is latched in the counter
-// and then reads the time stamp counter to return to the caller
-// utility routine
-// Code to calculate how many processor cycles are in a second...
-inline static void
-set_PIT2(int value)
-{
-// first, tell the clock we are going to write 16 bytes to the counter and enable one-shot mode
-// then write the two bytes into the clock register.
-// loop until the value is "realized" in the clock, this happens on the next tick
-//
- asm volatile(
- " movb $184,%%al \n\t"
- " outb %%al,$67 \n\t"
- " movb %%dl,%%al \n\t"
- " outb %%al,$66 \n\t"
- " movb %%dh,%%al \n\t"
- " outb %%al,$66 \n"
-"1: inb $66,%%al \n\t"
- " inb $66,%%al \n\t"
- " cmp %%al,%%dh \n\t"
- " jne 1b"
- : : "d"(value) : "%al");
-}
-
-inline static uint64_t
-get_PIT2(unsigned int *value)
-{
-// this routine first latches the time, then gets the time stamp so we know
-// how long the read will take later. Reads
- register uint64_t result;
- asm volatile(
- " xorl %%ecx,%%ecx \n\t"
- " movb $128,%%al \n\t"
- " outb %%al,$67 \n\t"
- " rdtsc \n\t"
- " pushl %%eax \n\t"
- " inb $66,%%al \n\t"
- " movb %%al,%%cl \n\t"
- " inb $66,%%al \n\t"
- " movb %%al,%%ch \n\t"
- " popl %%eax "
- : "=A"(result), "=c"(*value));
- return result;
-}
-
-static uint32_t
-timeRDTSC(void)
-{
- uint64_t latchTime;
- uint64_t saveTime,intermediate;
- unsigned int timerValue,x;
- boolean_t int_enabled;
- uint64_t fact[6] = { 2000011734ll,
- 2000045259ll,
- 2000078785ll,
- 2000112312ll,
- 2000145841ll,
- 2000179371ll};
-
- int_enabled = ml_set_interrupts_enabled(FALSE);
-
- enable_PIT2(); // turn on PIT2
- set_PIT2(0); // reset timer 2 to be zero
- latchTime = rdtsc_64(); // get the time stamp to time
- latchTime = get_PIT2(&timerValue) - latchTime; // time how long this takes
- set_PIT2(59658); // set up the timer to count 1/20th a second
- saveTime = rdtsc_64(); // now time how ling a 20th a second is...
- get_PIT2(&x);
- do { get_PIT2(&timerValue); x = timerValue;} while (timerValue > x);
- do {
- intermediate = get_PIT2(&timerValue);
- if (timerValue>x) printf("Hey we are going backwards! %d, %d\n",timerValue,x);
- x = timerValue;
- } while ((timerValue != 0) && (timerValue >5));
- printf("Timer value:%d\n",timerValue);
- printf("intermediate 0x%08x:0x%08x\n",intermediate);
- printf("saveTime 0x%08x:0x%08x\n",saveTime);
-
- intermediate = intermediate - saveTime; // raw # of tsc's it takes for about 1/20 second
- intermediate = intermediate * fact[timerValue]; // actual time spent
- intermediate = intermediate / 2000000000ll; // rescale so its exactly 1/20 a second
- intermediate = intermediate + latchTime; // add on our save fudge
- set_PIT2(0); // reset timer 2 to be zero
- disable_PIT2(0); // turn off PIT 2
- ml_set_interrupts_enabled(int_enabled);
- return intermediate;
-}
-
-static uint64_t
-rdtsctime_to_nanoseconds( void )
+/*
+ * rtc_nanotime_init:
+ *
+ * Intialize the nanotime info from the base time.
+ */
+static inline void
+_rtc_nanotime_init(pal_rtc_nanotime_t *rntp, uint64_t base)
{
- uint32_t numer;
- uint32_t denom;
- uint64_t abstime;
-
- uint32_t intermediate[3];
-
- numer = rtclock.timebase_const.numer;
- denom = rtclock.timebase_const.denom;
- abstime = rdtsc_64();
- if (denom == 0xFFFFFFFF) {
- abstime = fast_get_nano_from_abs(abstime, numer);
- } else {
- longmul(&abstime, numer, intermediate);
- abstime = longdiv(intermediate, denom);
- }
- return abstime;
-}
+ uint64_t tsc = rdtsc64();
-inline static mach_timespec_t
-rdtsc_to_timespec(void)
-{
- uint64_t currNanos;
- currNanos = rdtsctime_to_nanoseconds();
- return nanos_to_timespec(currNanos);
+ _pal_rtc_nanotime_store(tsc, base, rntp->scale, rntp->shift, rntp);
}
-/*
- * Initialize non-zero clock structure values.
- */
void
-rtc_setvals(
- unsigned int new_clknum,
- clock_res_t new_ires
- )
+rtc_nanotime_init(uint64_t base)
{
- unsigned int timeperclk;
- unsigned int scale0;
- unsigned int scale1;
- unsigned int res;
-
- clknum = new_clknum;
- rtc_intr_freq = (NSEC_PER_SEC / new_ires);
- rtc_intr_hertz = rtc_intr_freq / HZ;
- clks_per_int = (clknum + (rtc_intr_freq / 2)) / rtc_intr_freq;
- clks_per_int_99 = clks_per_int - clks_per_int/100;
-
- /*
- * The following calculations are done with scaling integer operations
- * in order that the integer results are accurate to the lsb.
- */
- timeperclk = div_scale(ZANO, clknum, &scale0); /* 838.105647 nsec */
-
- time_per_clk = mul_scale(ZHZ, timeperclk, &scale1); /* 83810 */
- if (scale0 > scale1)
- time_per_clk >>= (scale0 - scale1);
- else if (scale0 < scale1)
- panic("rtc_clock: time_per_clk overflow\n");
-
- /*
- * Notice that rtclock.intr_nsec is signed ==> use unsigned int res
- */
- res = mul_scale(clks_per_int, timeperclk, &scale1); /* 10000276 */
- if (scale0 > scale1)
- rtclock.intr_nsec = res >> (scale0 - scale1);
- else
- panic("rtc_clock: rtclock.intr_nsec overflow\n");
-
- rtc_intr_count = 1;
- RtcDelt = rtclock.intr_nsec/2;
+ _rtc_nanotime_init(&pal_rtc_nanotime_info, base);
+ rtc_nanotime_set_commpage(&pal_rtc_nanotime_info);
}
/*
- * Configure the real-time clock device. Return success (1)
- * or failure (0).
+ * rtc_nanotime_init_commpage:
+ *
+ * Call back from the commpage initialization to
+ * cause the commpage data to be filled in once the
+ * commpages have been created.
*/
-
-int
-sysclk_config(void)
+void
+rtc_nanotime_init_commpage(void)
{
- int RtcFlag;
- int pic;
-
-#if NCPUS > 1
- mp_disable_preemption();
- if (cpu_number() != master_cpu) {
- mp_enable_preemption();
- return(1);
- }
- mp_enable_preemption();
-#endif
- /*
- * Setup device.
- */
- pic = 0; /* FIXME .. interrupt registration moved to AppleIntelClock */
-
+ spl_t s = splclock();
- /*
- * We should attempt to test the real-time clock
- * device here. If it were to fail, we should panic
- * the system.
- */
- RtcFlag = /* test device */1;
- printf("realtime clock configured\n");
-
- simple_lock_init(&rtclock.lock, ETAP_NO_TRACE);
- return (RtcFlag);
+ rtc_nanotime_set_commpage(&pal_rtc_nanotime_info);
+ splx(s);
}
/*
- * Initialize the real-time clock device. Return success (1)
- * or failure (0). Since the real-time clock is required to
- * provide canonical mapped time, we allocate a page to keep
- * the clock time value. In addition, various variables used
- * to support the clock are initialized. Note: the clock is
- * not started until rtclock_reset is called.
+ * rtc_nanotime_read:
+ *
+ * Returns the current nanotime value, accessable from any
+ * context.
*/
-int
-sysclk_init(void)
+static inline uint64_t
+rtc_nanotime_read(void)
{
- vm_offset_t *vp;
-#if NCPUS > 1
- mp_disable_preemption();
- if (cpu_number() != master_cpu) {
- mp_enable_preemption();
- return(1);
- }
- mp_enable_preemption();
-#endif
-
- RtcTime = &rtclock.time;
- rtc_setvals( CLKNUM, RTC_MINRES ); /* compute constants */
- rtc_set_cyc_per_sec(); /* compute number of tsc beats per second */
- clock_timebase_init();
- return (1);
+ return _rtc_nanotime_read(&pal_rtc_nanotime_info);
}
-static volatile unsigned int last_ival = 0;
-
/*
- * Get the clock device time. This routine is responsible
- * for converting the device's machine dependent time value
- * into a canonical mach_timespec_t value.
+ * rtc_clock_napped:
+ *
+ * Invoked from power management when we exit from a low C-State (>= C4)
+ * and the TSC has stopped counting. The nanotime data is updated according
+ * to the provided value which represents the new value for nanotime.
*/
-kern_return_t
-sysclk_gettime(
- mach_timespec_t *cur_time) /* OUT */
-{
- if (!RtcTime) {
- /* Uninitialized */
- cur_time->tv_nsec = 0;
- cur_time->tv_sec = 0;
- return (KERN_SUCCESS);
- }
-
- *cur_time = rdtsc_to_timespec();
- return (KERN_SUCCESS);
-}
-
-kern_return_t
-sysclk_gettime_internal(
- mach_timespec_t *cur_time) /* OUT */
-{
- if (!RtcTime) {
- /* Uninitialized */
- cur_time->tv_nsec = 0;
- cur_time->tv_sec = 0;
- return (KERN_SUCCESS);
+void
+rtc_clock_napped(uint64_t base, uint64_t tsc_base)
+{
+ pal_rtc_nanotime_t *rntp = &pal_rtc_nanotime_info;
+ uint64_t oldnsecs;
+ uint64_t newnsecs;
+ uint64_t tsc;
+
+ assert(!ml_get_interrupts_enabled());
+ tsc = rdtsc64();
+ oldnsecs = rntp->ns_base + _rtc_tsc_to_nanoseconds(tsc - rntp->tsc_base, rntp);
+ newnsecs = base + _rtc_tsc_to_nanoseconds(tsc - tsc_base, rntp);
+
+ /*
+ * Only update the base values if time using the new base values
+ * is later than the time using the old base values.
+ */
+ if (oldnsecs < newnsecs) {
+ _pal_rtc_nanotime_store(tsc_base, base, rntp->scale, rntp->shift, rntp);
+ rtc_nanotime_set_commpage(rntp);
}
- *cur_time = rdtsc_to_timespec();
- return (KERN_SUCCESS);
}
/*
- * Get the clock device time when ALL interrupts are already disabled.
- * Same as above except for turning interrupts off and on.
- * This routine is responsible for converting the device's machine dependent
- * time value into a canonical mach_timespec_t value.
+ * Invoked from power management to correct the SFLM TSC entry drift problem:
+ * a small delta is added to the tsc_base. This is equivalent to nudgin time
+ * backwards. We require this to be on the order of a TSC quantum which won't
+ * cause callers of mach_absolute_time() to see time going backwards!
*/
void
-sysclk_gettime_interrupts_disabled(
- mach_timespec_t *cur_time) /* OUT */
-{
- if (!RtcTime) {
- /* Uninitialized */
- cur_time->tv_nsec = 0;
- cur_time->tv_sec = 0;
- return;
- }
- *cur_time = rdtsc_to_timespec();
-}
-
-// utility routine
-// Code to calculate how many processor cycles are in a second...
-
-static void
-rtc_set_cyc_per_sec()
+rtc_clock_adjust(uint64_t tsc_base_delta)
{
+ pal_rtc_nanotime_t *rntp = &pal_rtc_nanotime_info;
- uint32_t twen_cycles;
- uint32_t cycles;
-
- twen_cycles = timeRDTSC();
- if (twen_cycles> (1000000000/20)) {
- // we create this value so that you can use just a "fast" multiply to get nanos
- rtc_quant_scale = create_mul_quant_GHZ(twen_cycles);
- rtclock.timebase_const.numer = rtc_quant_scale; // because ctimeRDTSC gives us 1/20 a seconds worth
- rtclock.timebase_const.denom = 0xffffffff; // so that nanoseconds = (TSC * numer) / denom
-
- } else {
- rtclock.timebase_const.numer = 1000000000/20; // because ctimeRDTSC gives us 1/20 a seconds worth
- rtclock.timebase_const.denom = twen_cycles; // so that nanoseconds = (TSC * numer) / denom
- }
- cycles = twen_cycles; // number of cycles in 1/20th a second
- rtc_cyc_per_sec = cycles*20; // multiply it by 20 and we are done.. BUT we also want to calculate...
-
- cycles = ((rtc_cyc_per_sec + UI_CPUFREQ_ROUNDING_FACTOR - 1) / UI_CPUFREQ_ROUNDING_FACTOR) * UI_CPUFREQ_ROUNDING_FACTOR;
- gPEClockFrequencyInfo.cpu_clock_rate_hz = cycles;
-DISPLAYVALUE(rtc_set_cyc_per_sec,rtc_cyc_per_sec);
-DISPLAYEXIT(rtc_set_cyc_per_sec);
+ assert(!ml_get_interrupts_enabled());
+ assert(tsc_base_delta < 100ULL); /* i.e. it's small */
+ _rtc_nanotime_adjust(tsc_base_delta, rntp);
+ rtc_nanotime_set_commpage(rntp);
}
void
-clock_get_system_microtime(
- uint32_t *secs,
- uint32_t *microsecs)
+rtc_clock_stepping(__unused uint32_t new_frequency,
+ __unused uint32_t old_frequency)
{
- mach_timespec_t now;
-
- sysclk_gettime(&now);
-
- *secs = now.tv_sec;
- *microsecs = now.tv_nsec / NSEC_PER_USEC;
+ panic("rtc_clock_stepping unsupported");
}
void
-clock_get_system_nanotime(
- uint32_t *secs,
- uint32_t *nanosecs)
+rtc_clock_stepped(__unused uint32_t new_frequency,
+ __unused uint32_t old_frequency)
{
- mach_timespec_t now;
-
- sysclk_gettime(&now);
-
- *secs = now.tv_sec;
- *nanosecs = now.tv_nsec;
+ panic("rtc_clock_stepped unsupported");
}
/*
- * Get clock device attributes.
- */
-kern_return_t
-sysclk_getattr(
- clock_flavor_t flavor,
- clock_attr_t attr, /* OUT */
- mach_msg_type_number_t *count) /* IN/OUT */
-{
- spl_t s;
-
- if (*count != 1)
- return (KERN_FAILURE);
- switch (flavor) {
-
- case CLOCK_GET_TIME_RES: /* >0 res */
-#if (NCPUS == 1)
- LOCK_RTC(s);
- *(clock_res_t *) attr = 1000;
- UNLOCK_RTC(s);
- break;
-#endif /* (NCPUS == 1) */
- case CLOCK_ALARM_CURRES: /* =0 no alarm */
- LOCK_RTC(s);
- *(clock_res_t *) attr = rtclock.intr_nsec;
- UNLOCK_RTC(s);
- break;
-
- case CLOCK_ALARM_MAXRES:
- *(clock_res_t *) attr = RTC_MAXRES;
- break;
-
- case CLOCK_ALARM_MINRES:
- *(clock_res_t *) attr = RTC_MINRES;
- break;
-
- default:
- return (KERN_INVALID_VALUE);
- }
- return (KERN_SUCCESS);
-}
-
-/*
- * Set clock device attributes.
+ * rtc_sleep_wakeup:
+ *
+ * Invoked from power management when we have awoken from a sleep (S3)
+ * and the TSC has been reset, or from Deep Idle (S0) sleep when the TSC
+ * has progressed. The nanotime data is updated based on the passed-in value.
+ *
+ * The caller must guarantee non-reentrancy.
*/
-kern_return_t
-sysclk_setattr(
- clock_flavor_t flavor,
- clock_attr_t attr, /* IN */
- mach_msg_type_number_t count) /* IN */
+void
+rtc_sleep_wakeup(
+ uint64_t base)
{
- spl_t s;
- int freq;
- int adj;
- clock_res_t new_ires;
-
- if (count != 1)
- return (KERN_FAILURE);
- switch (flavor) {
-
- case CLOCK_GET_TIME_RES:
- case CLOCK_ALARM_MAXRES:
- case CLOCK_ALARM_MINRES:
- return (KERN_FAILURE);
-
- case CLOCK_ALARM_CURRES:
- new_ires = *(clock_res_t *) attr;
+ /* Set fixed configuration for lapic timers */
+ rtc_timer->rtc_config();
- /*
- * The new resolution must be within the predetermined
- * range. If the desired resolution cannot be achieved
- * to within 0.1%, an error is returned.
- */
- if (new_ires < RTC_MAXRES || new_ires > RTC_MINRES)
- return (KERN_INVALID_VALUE);
- freq = (NSEC_PER_SEC / new_ires);
- adj = (((clknum % freq) * new_ires) / clknum);
- if (adj > (new_ires / 1000))
- return (KERN_INVALID_VALUE);
- /*
- * Record the new alarm resolution which will take effect
- * on the next HZ aligned clock tick.
- */
- LOCK_RTC(s);
- if ( freq != rtc_intr_freq ) {
- rtclock.new_ires = new_ires;
- new_clknum = clknum;
- }
- UNLOCK_RTC(s);
- return (KERN_SUCCESS);
-
- default:
- return (KERN_INVALID_VALUE);
- }
+ /*
+ * Reset nanotime.
+ * The timestamp counter will have been reset
+ * but nanotime (uptime) marches onward.
+ */
+ rtc_nanotime_init(base);
}
-/*
- * Set next alarm time for the clock device. This call
- * always resets the time to deliver an alarm for the
- * clock.
- */
void
-sysclk_setalarm(
- mach_timespec_t *alarm_time)
-{
- spl_t s;
-
- LOCK_RTC(s);
- rtclock.alarm_time = *alarm_time;
- RtcAlrm = &rtclock.alarm_time;
- UNLOCK_RTC(s);
+rtc_decrementer_configure(void) {
+ rtc_timer->rtc_config();
}
-
/*
- * Configure the calendar clock.
+ * rtclock_early_init() is called very early at boot to
+ * establish mach_absolute_time() and set it to zero.
*/
-int
-calend_config(void)
+void
+rtclock_early_init(void)
{
- return bbc_config();
+ assert(tscFreq);
+ rtc_set_timescale(tscFreq);
}
/*
- * Initialize calendar clock.
+ * Initialize the real-time clock device.
+ * In addition, various variables used to support the clock are initialized.
*/
int
-calend_init(void)
-{
- return (1);
-}
-
-/*
- * Get the current clock time.
- */
-kern_return_t
-calend_gettime(
- mach_timespec_t *cur_time) /* OUT */
-{
- spl_t s;
-
- LOCK_RTC(s);
- if (!rtclock.calend_is_set) {
- UNLOCK_RTC(s);
- return (KERN_FAILURE);
- }
-
- (void) sysclk_gettime_internal(cur_time);
- ADD_MACH_TIMESPEC(cur_time, &rtclock.calend_offset);
- UNLOCK_RTC(s);
-
- return (KERN_SUCCESS);
-}
-
-void
-clock_get_calendar_microtime(
- uint32_t *secs,
- uint32_t *microsecs)
+rtclock_init(void)
{
- mach_timespec_t now;
-
- calend_gettime(&now);
+ uint64_t cycles;
- *secs = now.tv_sec;
- *microsecs = now.tv_nsec / NSEC_PER_USEC;
-}
+ assert(!ml_get_interrupts_enabled());
-void
-clock_get_calendar_nanotime(
- uint32_t *secs,
- uint32_t *nanosecs)
-{
- mach_timespec_t now;
+ if (cpu_number() == master_cpu) {
- calend_gettime(&now);
+ assert(tscFreq);
- *secs = now.tv_sec;
- *nanosecs = now.tv_nsec;
-}
-
-void
-clock_set_calendar_microtime(
- uint32_t secs,
- uint32_t microsecs)
-{
- mach_timespec_t new_time, curr_time;
- spl_t s;
+ /*
+ * Adjust and set the exported cpu speed.
+ */
+ cycles = rtc_export_speed(tscFreq);
- LOCK_RTC(s);
- (void) sysclk_gettime_internal(&curr_time);
- rtclock.calend_offset.tv_sec = new_time.tv_sec = secs;
- rtclock.calend_offset.tv_nsec = new_time.tv_nsec = microsecs * NSEC_PER_USEC;
- SUB_MACH_TIMESPEC(&rtclock.calend_offset, &curr_time);
- rtclock.calend_is_set = TRUE;
- UNLOCK_RTC(s);
+ /*
+ * Set min/max to actual.
+ * ACPI may update these later if speed-stepping is detected.
+ */
+ gPEClockFrequencyInfo.cpu_frequency_min_hz = cycles;
+ gPEClockFrequencyInfo.cpu_frequency_max_hz = cycles;
- (void) bbc_settime(&new_time);
+ rtc_timer_init();
+ clock_timebase_init();
+ ml_init_lock_timeout();
+ ml_init_delay_spin_threshold(10);
+ }
- host_notify_calendar_change();
-}
+ /* Set fixed configuration for lapic timers */
+ rtc_timer->rtc_config();
+ rtc_timer_start();
-/*
- * Get clock device attributes.
- */
-kern_return_t
-calend_getattr(
- clock_flavor_t flavor,
- clock_attr_t attr, /* OUT */
- mach_msg_type_number_t *count) /* IN/OUT */
-{
- spl_t s;
-
- if (*count != 1)
- return (KERN_FAILURE);
- switch (flavor) {
-
- case CLOCK_GET_TIME_RES: /* >0 res */
-#if (NCPUS == 1)
- LOCK_RTC(s);
- *(clock_res_t *) attr = 1000;
- UNLOCK_RTC(s);
- break;
-#else /* (NCPUS == 1) */
- LOCK_RTC(s);
- *(clock_res_t *) attr = rtclock.intr_nsec;
- UNLOCK_RTC(s);
- break;
-#endif /* (NCPUS == 1) */
-
- case CLOCK_ALARM_CURRES: /* =0 no alarm */
- case CLOCK_ALARM_MINRES:
- case CLOCK_ALARM_MAXRES:
- *(clock_res_t *) attr = 0;
- break;
-
- default:
- return (KERN_INVALID_VALUE);
- }
- return (KERN_SUCCESS);
+ return (1);
}
-#define tickadj (40*NSEC_PER_USEC) /* "standard" skew, ns / tick */
-#define bigadj (NSEC_PER_SEC) /* use 10x skew above bigadj ns */
+// utility routine
+// Code to calculate how many processor cycles are in a second...
-uint32_t
-clock_set_calendar_adjtime(
- int32_t *secs,
- int32_t *microsecs)
+static void
+rtc_set_timescale(uint64_t cycles)
{
- int64_t total, ototal;
- uint32_t interval = 0;
- spl_t s;
-
- total = (int64_t)*secs * NSEC_PER_SEC + *microsecs * NSEC_PER_USEC;
-
- LOCK_RTC(s);
- ototal = rtclock.calend_adjtotal;
-
- if (total != 0) {
- int32_t delta = tickadj;
-
- if (total > 0) {
- if (total > bigadj)
- delta *= 10;
- if (delta > total)
- delta = total;
- }
- else {
- if (total < -bigadj)
- delta *= 10;
- delta = -delta;
- if (delta < total)
- delta = total;
- }
-
- rtclock.calend_adjtotal = total;
- rtclock.calend_adjdelta = delta;
-
- interval = (NSEC_PER_SEC / HZ);
+ pal_rtc_nanotime_t *rntp = &pal_rtc_nanotime_info;
+ uint32_t shift = 0;
+
+ /* the "scale" factor will overflow unless cycles>SLOW_TSC_THRESHOLD */
+
+ while ( cycles <= SLOW_TSC_THRESHOLD) {
+ shift++;
+ cycles <<= 1;
}
- else
- rtclock.calend_adjdelta = rtclock.calend_adjtotal = 0;
+
+ rntp->scale = (uint32_t)(((uint64_t)NSEC_PER_SEC << 32) / cycles);
- UNLOCK_RTC(s);
+ rntp->shift = shift;
- if (ototal == 0)
- *secs = *microsecs = 0;
- else {
- *secs = ototal / NSEC_PER_SEC;
- *microsecs = ototal % NSEC_PER_SEC;
- }
+ /*
+ * On some platforms, the TSC is not reset at warm boot. But the
+ * rebase time must be relative to the current boot so we can't use
+ * mach_absolute_time(). Instead, we convert the TSC delta since boot
+ * to nanoseconds.
+ */
+ if (tsc_rebase_abs_time == 0)
+ tsc_rebase_abs_time = _rtc_tsc_to_nanoseconds(
+ rdtsc64() - tsc_at_boot, rntp);
- return (interval);
+ rtc_nanotime_init(0);
}
-uint32_t
-clock_adjust_calendar(void)
+static uint64_t
+rtc_export_speed(uint64_t cyc_per_sec)
{
- uint32_t interval = 0;
- int32_t delta;
- spl_t s;
-
- LOCK_RTC(s);
- delta = rtclock.calend_adjdelta;
- ADD_MACH_TIMESPEC_NSEC(&rtclock.calend_offset, delta);
+ pal_rtc_nanotime_t *rntp = &pal_rtc_nanotime_info;
+ uint64_t cycles;
- rtclock.calend_adjtotal -= delta;
-
- if (delta > 0) {
- if (delta > rtclock.calend_adjtotal)
- rtclock.calend_adjdelta = rtclock.calend_adjtotal;
- }
- else
- if (delta < 0) {
- if (delta < rtclock.calend_adjtotal)
- rtclock.calend_adjdelta = rtclock.calend_adjtotal;
- }
-
- if (rtclock.calend_adjdelta != 0)
- interval = (NSEC_PER_SEC / HZ);
+ if (rntp->shift != 0 )
+ printf("Slow TSC, rtc_nanotime.shift == %d\n", rntp->shift);
+
+ /* Round: */
+ cycles = ((cyc_per_sec + (UI_CPUFREQ_ROUNDING_FACTOR/2))
+ / UI_CPUFREQ_ROUNDING_FACTOR)
+ * UI_CPUFREQ_ROUNDING_FACTOR;
- UNLOCK_RTC(s);
+ /*
+ * Set current measured speed.
+ */
+ if (cycles >= 0x100000000ULL) {
+ gPEClockFrequencyInfo.cpu_clock_rate_hz = 0xFFFFFFFFUL;
+ } else {
+ gPEClockFrequencyInfo.cpu_clock_rate_hz = (unsigned long)cycles;
+ }
+ gPEClockFrequencyInfo.cpu_frequency_hz = cycles;
- return (interval);
+ kprintf("[RTCLOCK] frequency %llu (%llu)\n", cycles, cyc_per_sec);
+ return(cycles);
}
void
-clock_initialize_calendar(void)
+clock_get_system_microtime(
+ clock_sec_t *secs,
+ clock_usec_t *microsecs)
{
- mach_timespec_t bbc_time, curr_time;
- spl_t s;
-
- if (bbc_gettime(&bbc_time) != KERN_SUCCESS)
- return;
-
- LOCK_RTC(s);
- if (!rtclock.calend_is_set) {
- (void) sysclk_gettime_internal(&curr_time);
- rtclock.calend_offset = bbc_time;
- SUB_MACH_TIMESPEC(&rtclock.calend_offset, &curr_time);
- rtclock.calend_is_set = TRUE;
- }
- UNLOCK_RTC(s);
+ uint64_t now = rtc_nanotime_read();
- host_notify_calendar_change();
+ _absolutetime_to_microtime(now, secs, microsecs);
}
void
-clock_timebase_info(
- mach_timebase_info_t info)
+clock_get_system_nanotime(
+ clock_sec_t *secs,
+ clock_nsec_t *nanosecs)
{
- spl_t s;
+ uint64_t now = rtc_nanotime_read();
- LOCK_RTC(s);
- if (rtclock.timebase_const.denom == 0xFFFFFFFF) {
- info->numer = info->denom = rtc_quant_scale;
- } else {
- info->numer = info->denom = 1;
- }
- UNLOCK_RTC(s);
-}
+ _absolutetime_to_nanotime(now, secs, nanosecs);
+}
void
-clock_set_timer_deadline(
- uint64_t deadline)
+clock_gettimeofday_set_commpage(uint64_t abstime, uint64_t sec, uint64_t frac, uint64_t scale, uint64_t tick_per_sec)
{
- spl_t s;
-
- LOCK_RTC(s);
- rtclock.timer_deadline = deadline;
- rtclock.timer_is_set = TRUE;
- UNLOCK_RTC(s);
+ commpage_set_timestamp(abstime, sec, frac, scale, tick_per_sec);
}
void
-clock_set_timer_func(
- clock_timer_func_t func)
+clock_timebase_info(
+ mach_timebase_info_t info)
{
- spl_t s;
-
- LOCK_RTC(s);
- if (rtclock.timer_expire == NULL)
- rtclock.timer_expire = func;
- UNLOCK_RTC(s);
-}
-
-\f
-
-/*
- * Load the count register and start the clock.
- */
-#define RTCLOCK_RESET() { \
- outb(PITCTL_PORT, PIT_C0|PIT_NDIVMODE|PIT_READMODE); \
- outb(PITCTR0_PORT, (clks_per_int & 0xff)); \
- outb(PITCTR0_PORT, (clks_per_int >> 8)); \
-}
+ info->numer = info->denom = 1;
+}
/*
- * Reset the clock device. This causes the realtime clock
- * device to reload its mode and count value (frequency).
- * Note: the CPU should be calibrated
- * before starting the clock for the first time.
+ * Real-time clock device interrupt.
*/
-
void
-rtclock_reset(void)
+rtclock_intr(
+ x86_saved_state_t *tregs)
{
- int s;
+ uint64_t rip;
+ boolean_t user_mode = FALSE;
-#if NCPUS > 1
- mp_disable_preemption();
- if (cpu_number() != master_cpu) {
- mp_enable_preemption();
- return;
- }
- mp_enable_preemption();
-#endif /* NCPUS > 1 */
- LOCK_RTC(s);
- RTCLOCK_RESET();
- UNLOCK_RTC(s);
-}
+ assert(get_preemption_level() > 0);
+ assert(!ml_get_interrupts_enabled());
-/*
- * Real-time clock device interrupt. Called only on the
- * master processor. Updates the clock time and upcalls
- * into the higher level clock code to deliver alarms.
- */
-int
-rtclock_intr(struct i386_interrupt_state *regs)
-{
- uint64_t abstime;
- mach_timespec_t clock_time;
- int i;
- spl_t s;
- boolean_t usermode;
+ if (is_saved_state64(tregs) == TRUE) {
+ x86_saved_state64_t *regs;
+
+ regs = saved_state64(tregs);
- /*
- * Update clock time. Do the update so that the macro
- * MTS_TO_TS() for reading the mapped time works (e.g.
- * update in order: mtv_csec, mtv_time.tv_nsec, mtv_time.tv_sec).
- */
- LOCK_RTC(s);
- abstime = rdtsctime_to_nanoseconds(); // get the time as of the TSC
- clock_time = nanos_to_timespec(abstime); // turn it into a timespec
- rtclock.time.tv_nsec = clock_time.tv_nsec;
- rtclock.time.tv_sec = clock_time.tv_sec;
- rtclock.abstime = abstime;
-
- /* note time now up to date */
- last_ival = 0;
+ if (regs->isf.cs & 0x03)
+ user_mode = TRUE;
+ rip = regs->isf.rip;
+ } else {
+ x86_saved_state32_t *regs;
- /*
- * On a HZ-tick boundary: return 0 and adjust the clock
- * alarm resolution (if requested). Otherwise return a
- * non-zero value.
- */
- if ((i = --rtc_intr_count) == 0) {
- if (rtclock.new_ires) {
- rtc_setvals(new_clknum, rtclock.new_ires);
- RTCLOCK_RESET(); /* lock clock register */
- rtclock.new_ires = 0;
- }
- rtc_intr_count = rtc_intr_hertz;
- UNLOCK_RTC(s);
- usermode = (regs->efl & EFL_VM) || ((regs->cs & 0x03) != 0);
- hertz_tick(usermode, regs->eip);
- LOCK_RTC(s);
+ regs = saved_state32(tregs);
+
+ if (regs->cs & 0x03)
+ user_mode = TRUE;
+ rip = regs->eip;
}
- if ( rtclock.timer_is_set &&
- rtclock.timer_deadline <= abstime ) {
- rtclock.timer_is_set = FALSE;
- UNLOCK_RTC(s);
+ /* call the generic etimer */
+ timer_intr(user_mode, rip);
+}
- (*rtclock.timer_expire)(abstime);
- LOCK_RTC(s);
- }
+/*
+ * Request timer pop from the hardware
+ */
- /*
- * Perform alarm clock processing if needed. The time
- * passed up is incremented by a half-interrupt tick
- * to trigger alarms closest to their desired times.
- * The clock_alarm_intr() routine calls sysclk_setalrm()
- * before returning if later alarms are pending.
- */
+uint64_t
+setPop(uint64_t time)
+{
+ uint64_t now;
+ uint64_t pop;
- if (RtcAlrm && (RtcAlrm->tv_sec < RtcTime->tv_sec ||
- (RtcAlrm->tv_sec == RtcTime->tv_sec &&
- RtcDelt >= RtcAlrm->tv_nsec - RtcTime->tv_nsec))) {
- clock_time.tv_sec = 0;
- clock_time.tv_nsec = RtcDelt;
- ADD_MACH_TIMESPEC (&clock_time, RtcTime);
- RtcAlrm = 0;
- UNLOCK_RTC(s);
- /*
- * Call clock_alarm_intr() without RTC-lock.
- * The lock ordering is always CLOCK-lock
- * before RTC-lock.
- */
- clock_alarm_intr(SYSTEM_CLOCK, &clock_time);
- LOCK_RTC(s);
+ /* 0 and EndOfAllTime are special-cases for "clear the timer" */
+ if (time == 0 || time == EndOfAllTime ) {
+ time = EndOfAllTime;
+ now = 0;
+ pop = rtc_timer->rtc_set(0, 0);
+ } else {
+ now = rtc_nanotime_read(); /* The time in nanoseconds */
+ pop = rtc_timer->rtc_set(time, now);
}
- UNLOCK_RTC(s);
- return (i);
-}
+ /* Record requested and actual deadlines set */
+ x86_lcpu()->rtcDeadline = time;
+ x86_lcpu()->rtcPop = pop;
-void
-clock_get_uptime(
- uint64_t *result)
-{
- *result = rdtsctime_to_nanoseconds();
+ return pop - now;
}
uint64_t
mach_absolute_time(void)
{
- return rdtsctime_to_nanoseconds();
+ return rtc_nanotime_read();
}
-void
-clock_interval_to_deadline(
- uint32_t interval,
- uint32_t scale_factor,
- uint64_t *result)
+uint64_t
+mach_approximate_time(void)
{
- uint64_t abstime;
-
- clock_get_uptime(result);
-
- clock_interval_to_absolutetime_interval(interval, scale_factor, &abstime);
-
- *result += abstime;
+ return rtc_nanotime_read();
}
void
}
void
-clock_absolutetime_interval_to_deadline(
- uint64_t abstime,
- uint64_t *result)
+absolutetime_to_microtime(
+ uint64_t abstime,
+ clock_sec_t *secs,
+ clock_usec_t *microsecs)
{
- clock_get_uptime(result);
+ _absolutetime_to_microtime(abstime, secs, microsecs);
+}
- *result += abstime;
+void
+nanotime_to_absolutetime(
+ clock_sec_t secs,
+ clock_nsec_t nanosecs,
+ uint64_t *result)
+{
+ *result = ((uint64_t)secs * NSEC_PER_SEC) + nanosecs;
}
void
*result = nanoseconds;
}
-/*
- * Spin-loop delay primitives.
- */
void
-delay_for_interval(
- uint32_t interval,
- uint32_t scale_factor)
-{
- uint64_t now, end;
-
- clock_interval_to_deadline(interval, scale_factor, &end);
-
- do {
- cpu_pause();
- now = mach_absolute_time();
- } while (now < end);
-}
-
-void
-clock_delay_until(
+machine_delay_until(
+ uint64_t interval,
uint64_t deadline)
{
- uint64_t now;
-
- do {
+ (void)interval;
+ while (mach_absolute_time() < deadline) {
cpu_pause();
- now = mach_absolute_time();
- } while (now < deadline);
-}
-
-void
-delay(
- int usec)
-{
- delay_for_interval((usec < 0)? -usec: usec, NSEC_PER_USEC);
+ }
}
projects / apple / xnu.git / blobdiff