+/* When kIOPMTracePointHibernate is the latest tracePoint,
+ * PM is writing the hibernate image to disk.
+ */
+ kIOPMTracePointHibernate = 0x1a,
+
+/* When kIOPMTracePointSystemSleep is the latest tracePoint,
+ * PM has recorded the final trace point before the hardware platform
+ * enters sleep state, or low level wakeup is underway - such as restoring
+ * the hibernate image from disk.
+ *
+ * Note: If a system is asleep and then loses power, and it does not have a
+ * hibernate image to restore from (e.g. hibernatemode = 0), then OS X will
+ * interpret this power loss as a failure in kIOPMTracePointSystemSleep.
+ *
+ * Phase begins: Before the OS directs the hardware to enter sleep state.
+ * Phase ends: Control returns to the OS on wake, but before recording the first
+ * wake trace point.
+ */
+ kIOPMTracePointSystemSleep = 0x1f,
+
+/* When kIOPMTracePointWakePlatformDriver is the latest tracePoint,
+ * PM is executing platform dependent code to prepare for system wake.
+ */
+ kIOPMTracePointWakePlatformDriver = 0x21,
+
+/* When kIOPMTracePointWakePlatformActions is the latest tracePoint,
+ * PM is calling drivers that have registered a platform wake action.
+ */
+ kIOPMTracePointWakePlatformActions = 0x22,
+
+/* When kIOPMTracePointWakeCPUs is the latest tracePoint,
+ * PM is bringing all non-boot processors online.
+ */
+ kIOPMTracePointWakeCPUs = 0x23,
+
+/* When kIOPMTracePointWakeWillPowerOnClients is the latest tracePoint,
+ * PM is sending kIOMessageSystemWillPowerOn to both kernel clients and
+ * applications. PM also notifies system capability clients about the
+ * proposed capability change.
+ *
+ * Phase begins: Send kIOMessageSystemWillPowerOn and
+ * kIOMessageSystemCapabilityChange notifications.
+ * Phase ends: Finished sending notifications.
+ */
+ kIOPMTracePointWakeWillPowerOnClients = 0x24,
+
+/* When kIOPMTracePointWakeWillChangeInterests is the latest tracePoint,
+ * PM is calling powerStateWillChangeTo() on interested drivers of root domain.
+ *
+ * Phase begins: Dispatch a callout thread to call interested drivers.
+ * Phase ends: Callout thread work done, and acknowledgePowerChange() called
+ * by drivers that indicated asynchronous completion.
+ */
+ kIOPMTracePointWakeWillChangeInterests = 0x25,
+
+/* When kIOPMTracePointWakeDidChangeInterests is the latest tracePoint,
+ * PM is calling powerStateDidChangeTo() on interested drivers of root domain.
+ *
+ * Phase begins: Dispatch a callout thread to call interested drivers.
+ * Phase ends: Callout thread work done, and acknowledgePowerChange() called
+ * by drivers that indicated asynchronous completion.
+ */
+ kIOPMTracePointWakeDidChangeInterests = 0x26,
+
+/* When kIOPMTracePointWakePowerPlaneDrivers is the latest tracePoint,
+ * PM is directing power plane drivers to power up in root-to-leaf order.
+ *
+ * Phase begins: Root domain informs its power children that it transitioned
+ * to ON state. This has a cascade effect and triggers all drivers in
+ * the power plane to re-evaluate and potentially change power state.
+ * Phase ends: All power transitions in response to the root domain power
+ * change have completed.
+ */
+ kIOPMTracePointWakePowerPlaneDrivers = 0x27,
+
+/* When kIOPMTracePointWakeCapabilityClients is the latest tracePoint,
+ * PM is notifying system capability clients about system wake, and waiting
+ * for any asynchronous completions.
+ *
+ * Phase begins: Inform capability clients that system has gained capabilities.
+ * Phase ends: All notified clients have acknowledged.
+ */
+ kIOPMTracePointWakeCapabilityClients = 0x28,
+
+/* When kIOPMTracePointWakeApplications is the latest tracePoint,
+ * System CPU is powered, PM has powered on each driver.
+ *
+ * Phase begins: Send asynchronous kIOMessageSystemHasPoweredOn notifications.
+ * Phase ends: Finished sending asynchronous notifications.
+ */
+ kIOPMTracePointWakeApplications = 0x29,
+
+/* kIOPMTracePointSystemLoginwindowPhase
+ * This phase represents a several minute window after the system has powered on.
+ * Higher levels of system diagnostics are in a heightened state of alert in this phase,
+ * in case any user errors occurred that we could not detect in software.
+ *
+ * Phase begins: After IOPMrootDomain sends kIOMessageSystemHasPoweredOn message.
+ * Phase ends: When loginwindow calls IOPMSleepWakeSetUUID(NULL) the system shall
+ * be considered awake and usable. The next phase shall be kIOPMTracePointSystemUp.
+ */
+ kIOPMTracePointSystemLoginwindowPhase = 0x30,
+
+/* When kIOPMTracePointDarkWakeEntry is the latest tracePoint,
+ * PM has started a transition from full wake to dark wake.
+ *
+ * Phase begins: Start transition to dark wake.
+ * Phase ends: System in dark wake. Before recording kIOPMTracePointSystemUp.
+ */
+ kIOPMTracePointDarkWakeEntry = 0x31,
+
+/* When kIOPMTracePointDarkWakeExit is the latest tracePoint,
+ * PM has started a transition from dark wake to full wake.
+ *
+ * Phase begins: Start transition to full wake.
+ * Phase ends: System in full wake. Before recording kIOPMTracePointSystemUp.
+ */
+ kIOPMTracePointDarkWakeExit = 0x32
+};
+
+/*****************************************************************************/
+
+/*
+ * Component wake progress keys
+ *
+ * Certain components have the ability to log their wake progress with
+ * root domain using the keys provided below.
+ *
+ * LoginWindow - 4 bits
+ * CoreDisplay - 8 bits
+ * CoreGraphics - 8 bits
+ *
+ * These bits are stored with the trace phase that gets logged to
+ * the RTC register.
+ */
+
+// Values that should be passed in to IOPMLogWakeProgress
+enum {
+ kIOPMLoginWindowProgress = 1,
+ kIOPMCoreDisplayProgress = 2,
+ kIOPMCoreGraphicsProgress = 3
+};
+
+enum {
+ kIOPMLoginWindowProgressMask = 0x0f,
+ kIOPMCoreDisplayProgressMask = 0xff,
+ kIOPMCoreGraphicsProgressMask = 0xff
+};
+
+/*
+ * kIOPMLoginWindowProgressKey - identifies PM debug data specific to LoginWindow
+ * for use with IOPMrootDomain. Only 4 bits of data are allotted.
+ */
+#define kIOPMLoginWindowProgressKey "LoginWindowProgress"
+
+/*
+ * kIOPMCoreDisplayProgressKey - identifies PM debug data specific to CoreDisplay
+ * for use with IOPMrootDomain. Only 8 bits of data are allotted.
+ */
+#define kIOPMCoreDisplayProgressKey "CoreDisplayProgress"
+
+/*
+ * kIOPMCoreGraphicsProgressKey - identifies PM debug data specific to CoreGraphics
+ * for use with IOPMrootDomain. Only 8 bits of data are allotted.
+ */
+#define kIOPMCoreGraphicsProgressKey "CoreGraphicsProgress"
+
+// For PM internal use only - key to locate sleep failure results within SCDynamicStore.
+#define kIOPMDynamicStoreSleepFailureKey "SleepFailure"
+
+/*****************************************************************************/
+
+// For IOPMLibPrivate.h
+#define kIOPMSleepWakeFailureKey "PMFailurePhase"
+#define kIOPMSleepWakeFailureCodeKey "PMStatusCode"
+#define kIOPMSleepWakeFailureLoginKey "LWFailurePhase"
+#define kIOPMSleepWakeFailureUUIDKey "UUID"
+#define kIOPMSleepWakeFailureDateKey "Date"
+#define kIOPMSleepWakeWdogRebootKey "SWWdogTriggeredRestart"
+#define kIOPMSleepWakeWdogLogsValidKey "SWWdogLogsValid"
+
+/*****************************************************************************
+ *
+ * Root Domain private property keys
+ *
+ *****************************************************************************/
+
+/* kIOPMFeatureAutoPowerOffKey
+ * Feature published if Auto Power Off is supported
+ */
+#define kIOPMFeatureAutoPowerOffKey "AutoPowerOff"
+
+/* kIOPMAutoPowerOffEnabledKey
+ * Indicates if Auto Power Off is enabled.
+ * It has a boolean value.
+ * true == Auto Power Off is enabled
+ * false == Auto Power Off is disabled
+ * not present == Auto Power Off is not supported on this hardware
+ */
+#define kIOPMAutoPowerOffEnabledKey "AutoPowerOff Enabled"
+
+/* kIOPMAutoPowerOffDelayKey
+ * Key refers to a CFNumberRef that represents the delay in seconds before
+ * entering the Auto Power Off state. The property is not present if Auto
+ * Power Off is unsupported.
+ */
+#define kIOPMAutoPowerOffDelayKey "AutoPowerOff Delay"
+
+/* kIOPMAutoPowerOffTimerKey
+ * Key refers to a CFNumberRef that indicates the time in seconds until the
+ * expiration of the Auto Power Off delay period. This value should be used
+ * to program a wake alarm before system sleep.
+ */
+#define kIOPMAutoPowerOffTimerKey "AutoPowerOff Timer"
+
+/* kIOPMDeepSleepTimerKey
+ * Key refers to a CFNumberRef that indicates the time in seconds until the
+ * expiration of the Standby delay period. This value should be used
+ * to program a wake alarm before system sleep.
+ */
+#define kIOPMDeepSleepTimerKey "Standby Timer"
+
+/* kIOPMUserWakeAlarmScheduledKey
+ * Key refers to a boolean value that indicates if an user alarm was scheduled
+ * or pending.
+ */
+#define kIOPMUserWakeAlarmScheduledKey "UserWakeAlarmScheduled"
+
+/* kIOPMDeepIdleSupportedKey
+ * Presence of this key indicates Deep Idle is supported on this platform.
+ * Key will always refer to a value of kOSBooleanTrue.
+ */
+#define kIOPMDeepIdleSupportedKey "IOPMDeepIdleSupported"
+
+/* kIOPMUserTriggeredFullWakeKey
+ * Key refers to a boolean value that indicates if the first full wake since
+ * last system sleep was triggered by the local user. This property is set
+ * before the initial full wake transition, and removed after powering down
+ * drivers for system sleep.
+ */
+#define kIOPMUserTriggeredFullWakeKey "IOPMUserTriggeredFullWake"
+
+/* kIOPMUserIsActiveKey
+ * Key refers to a boolean value that indicates if the user is active.
+ */
+#define kIOPMUserIsActiveKey "IOPMUserIsActive"
+
+/* kIOPMDriverWakeEventsKey
+ * Key refers to a property that should only be examined by powerd.
+ */
+#define kIOPMDriverWakeEventsKey "IOPMDriverWakeEvents"
+
+/*****************************************************************************
+ *
+ * IOPMDriverWakeEvents dictionary keys
+ *
+ *****************************************************************************/
+
+#define kIOPMWakeEventTimeKey "Time"
+#define kIOPMWakeEventFlagsKey "Flags"
+#define kIOPMWakeEventReasonKey "Reason"
+#define kIOPMWakeEventDetailsKey "Details"
+
+/* kIOPMFeatureProModeKey
+ * Feature published if ProMode is supported
+ */
+#define kIOPMFeatureProModeKey "ProMode"
+
+/*****************************************************************************
+ *
+ * Wake event flags reported to IOPMrootDomain::claimSystemWakeEvent()
+ *
+ *****************************************************************************/
+
+#define kIOPMWakeEventSource 0x00000001
+
+#if !(defined(RC_HIDE_N144) || defined(RC_HIDE_N146))
+/*****************************************************************************
+ *
+ * AOT defs
+ *
+ *****************************************************************************/
+
+// signals the device should wake up to user space running
+#define kIOPMWakeEventAOTExit 0x00000002
+
+// will start a 400 ms timer before sleeping
+#define kIOPMWakeEventAOTPossibleExit 0x00000004
+
+// signals the device should wake up to user space running
+#define kIOPMWakeEventAOTConfirmedPossibleExit 0x00000008
+
+// signals the device should go back to AOT
+#define kIOPMWakeEventAOTRejectedPossibleExit 0x00000010
+
+// signals the device should go back to AOT
+#define kIOPMWakeEventAOTExpiredPossibleExit 0x00000020
+
+#define kIOPMWakeEventAOTFlags \
+ (kIOPMWakeEventAOTExit \
+ | kIOPMWakeEventAOTPossibleExit \
+ | kIOPMWakeEventAOTConfirmedPossibleExit \
+ | kIOPMWakeEventAOTRejectedPossibleExit \
+ | kIOPMWakeEventAOTExpiredPossibleExit)
+
+#define kIOPMWakeEventAOTPossibleFlags \
+ (kIOPMWakeEventAOTPossibleExit \
+ | kIOPMWakeEventAOTConfirmedPossibleExit \
+ | kIOPMWakeEventAOTRejectedPossibleExit \
+ | kIOPMWakeEventAOTExpiredPossibleExit)
+
+#define kIOPMWakeEventAOTPerCycleFlags \
+ (kIOPMWakeEventAOTPossibleExit \
+ | kIOPMWakeEventAOTRejectedPossibleExit \
+ | kIOPMWakeEventAOTExpiredPossibleExit)
+
+#define kIOPMWakeEventAOTExitFlags \
+ (kIOPMWakeEventAOTExit \
+ | kIOPMWakeEventAOTConfirmedPossibleExit)
+
+enum {
+ kIOPMAOTModeEnable = 0x00000001,
+ kIOPMAOTModeCycle = 0x00000002,
+ kIOPMAOTModeAddEventFlags = 0x00000004,
+ kIOPMAOTModeRespectTimers = 0x00000008,
+ kIOPMAOTModeDefault = (kIOPMAOTModeEnable | kIOPMAOTModeAddEventFlags | kIOPMAOTModeRespectTimers)
+};
+
+enum {
+ kIOPMAOTMetricsKernelWakeCountMax = 24
+};
+
+struct IOPMAOTMetrics
+{
+ uint32_t sleepCount;
+ uint32_t possibleCount;
+ uint32_t confirmedPossibleCount;
+ uint32_t rejectedPossibleCount;
+ uint32_t expiredPossibleCount;
+ uint32_t noTimeSetCount;
+ uint32_t rtcAlarmsCount;
+ uint32_t softwareRequestCount;
+ uint64_t totalTime;
+
+ char kernelWakeReason[kIOPMAOTMetricsKernelWakeCountMax][64];
+ // 54:10 secs:ms calendar time
+ uint64_t kernelSleepTime[kIOPMAOTMetricsKernelWakeCountMax];
+ uint64_t kernelWakeTime[kIOPMAOTMetricsKernelWakeCountMax];
+};
+
+#define kIOPMAOTPowerKey "aot-power"
+
+#endif /* !(defined(RC_HIDE_N144) || defined(RC_HIDE_N146)) */
+
+/*****************************************************************************
+ *
+ * System Sleep Policy
+ *
+ *****************************************************************************/
+
+#define kIOPMSystemSleepPolicySignature 0x54504c53
+#define kIOPMSystemSleepPolicyVersion 2
+
+/*!
+ * @defined kIOPMSystemSleepTypeKey
+ * @abstract Indicates the type of system sleep.
+ * @discussion An OSNumber property of root domain that describes the type
+ * of system sleep. This property is set after notifying priority sleep/wake
+ * clients, but before informing interested drivers and shutting down power
+ * plane drivers. On a hibernate abort or failure, this property will not be
+ * updated and will indicate the failed sleep type.
+ */
+#define kIOPMSystemSleepTypeKey "IOPMSystemSleepType"
+
+struct IOPMSystemSleepPolicyVariables
+{
+ uint32_t signature; // kIOPMSystemSleepPolicySignature
+ uint32_t version; // kIOPMSystemSleepPolicyVersion
+
+ uint64_t currentCapability; // current system capability bits
+ uint64_t highestCapability; // highest system capability bits
+
+ uint64_t sleepFactors; // sleep factor bits
+ uint32_t sleepReason; // kIOPMSleepReason*
+ uint32_t sleepPhase; // identify the sleep phase
+ uint32_t hibernateMode; // current hibernate mode
+
+ uint32_t standbyDelay; // standby delay in seconds
+ uint32_t standbyTimer; // standby timer in seconds
+ uint32_t poweroffDelay; // auto-poweroff delay in seconds
+ uint32_t scheduledAlarms; // bitmask of scheduled alarm types
+ uint32_t poweroffTimer; // auto-poweroff timer in seconds
+
+ uint32_t reserved[49]; // pad sizeof 256 bytes
+};
+
+enum {
+ kIOPMAlarmBitDebugWake = 0x01,
+ kIOPMAlarmBitCalendarWake = 0x02,
+ kIOPMAlarmBitMaintenanceWake = 0x04,
+ kIOPMAlarmBitSleepServiceWake = 0x08
+};
+
+enum {
+ kIOPMSleepPhase0 = 0,
+ kIOPMSleepPhase1,
+ kIOPMSleepPhase2
+};
+
+// Sleep Factor Mask / Bits
+enum {
+ kIOPMSleepFactorSleepTimerWake = 0x00000001ULL,
+ kIOPMSleepFactorLidOpen = 0x00000002ULL,
+ kIOPMSleepFactorACPower = 0x00000004ULL,
+ kIOPMSleepFactorBatteryLow = 0x00000008ULL,
+ kIOPMSleepFactorStandbyNoDelay = 0x00000010ULL,
+ kIOPMSleepFactorStandbyForced = 0x00000020ULL,
+ kIOPMSleepFactorStandbyDisabled = 0x00000040ULL,
+ kIOPMSleepFactorUSBExternalDevice = 0x00000080ULL,
+ kIOPMSleepFactorBluetoothHIDDevice = 0x00000100ULL,
+ kIOPMSleepFactorExternalMediaMounted = 0x00000200ULL,
+ kIOPMSleepFactorThunderboltDevice = 0x00000400ULL,
+ kIOPMSleepFactorRTCAlarmScheduled = 0x00000800ULL,
+ kIOPMSleepFactorMagicPacketWakeEnabled = 0x00001000ULL,
+ kIOPMSleepFactorHibernateForced = 0x00010000ULL,
+ kIOPMSleepFactorAutoPowerOffDisabled = 0x00020000ULL,
+ kIOPMSleepFactorAutoPowerOffForced = 0x00040000ULL,
+ kIOPMSleepFactorExternalDisplay = 0x00080000ULL,
+ kIOPMSleepFactorNetworkKeepAliveActive = 0x00100000ULL,
+ kIOPMSleepFactorLocalUserActivity = 0x00200000ULL,
+ kIOPMSleepFactorHibernateFailed = 0x00400000ULL,
+ kIOPMSleepFactorThermalWarning = 0x00800000ULL,
+ kIOPMSleepFactorDisplayCaptured = 0x01000000ULL
+};
+
+// System Sleep Types
+enum {
+ kIOPMSleepTypeInvalid = 0,
+ kIOPMSleepTypeAbortedSleep = 1,
+ kIOPMSleepTypeNormalSleep = 2,
+ kIOPMSleepTypeSafeSleep = 3,
+ kIOPMSleepTypeHibernate = 4,
+ kIOPMSleepTypeStandby = 5,
+ kIOPMSleepTypePowerOff = 6,
+ kIOPMSleepTypeDeepIdle = 7,
+ kIOPMSleepTypeLast = 8
+};
+
+// System Sleep Flags
+enum {
+ kIOPMSleepFlagDisableHibernateAbort = 0x00000001,
+ kIOPMSleepFlagDisableUSBWakeEvents = 0x00000002,
+ kIOPMSleepFlagDisableBatlowAssertion = 0x00000004,
+ kIOPMSleepFlagDisableS4WakeSources = 0x00000008
+};
+
+// System Wake Events
+enum {
+ kIOPMWakeEventLidOpen = 0x00000001,
+ kIOPMWakeEventLidClose = 0x00000002,
+ kIOPMWakeEventACAttach = 0x00000004,
+ kIOPMWakeEventACDetach = 0x00000008,
+ kIOPMWakeEventCDInsert = 0x00000010,
+ kIOPMWakeEventCDEject = 0x00000020,
+ kIOPMWakeEventHPDAttach = 0x00000040,
+ kIOPMWakeEventHPDDetach = 0x00000080,
+ kIOPMWakeEventPowerButton = 0x00000100,
+ kIOPMWakeEventG3PowerOn = 0x00000200,
+ kIOPMWakeEventUserPME = 0x00000400,
+ kIOPMWakeEventSleepTimer = 0x00000800,
+ kIOPMWakeEventBatteryLow = 0x00001000,
+ kIOPMWakeEventDarkPME = 0x00002000,
+ kIOPMWakeEventWifi = 0x00004000,
+ kIOPMWakeEventRTCSystem = 0x00008000, // Maintenance RTC wake
+ kIOPMWakeEventUSBCPlugin = 0x00010000, // USB-C Plugin
+ kIOPMWakeEventHID = 0x00020000,
+ kIOPMWakeEventBluetooth = 0x00040000,
+ kIOPMWakeEventDFR = 0x00080000,
+ kIOPMWakeEventSD = 0x00100000, // SD card
+ kIOPMWakeEventLANWake = 0x00200000, // Wake on Lan
+ kIOPMWakeEventLANPlugin = 0x00400000, // Ethernet media sense
+ kIOPMWakeEventThunderbolt = 0x00800000,
+ kIOPMWakeEventRTCUser = 0x01000000, // User requested RTC wake
+};
+
+/*!
+ * @defined kIOPMSystemSleepParametersKey
+ * @abstract Sleep parameters describing the upcoming sleep
+ * @discussion Root domain updates this OSData property before system sleep
+ * to pass sleep parameters to the platform driver. Some of the parameters
+ * are based on the chosen entry in the system sleep policy table.
+ */
+#define kIOPMSystemSleepParametersKey "IOPMSystemSleepParameters"
+#define kIOPMSystemSleepParametersVersion 2
+
+struct IOPMSystemSleepParameters
+{
+ uint16_t version;
+ uint16_t reserved1;
+ uint32_t sleepType;
+ uint32_t sleepFlags;
+ uint32_t ecWakeEvents;
+ uint32_t ecWakeTimer;
+ uint32_t ecPoweroffTimer;
+ uint32_t reserved2[10];
+} __attribute__((packed));
+
+
+/*
+ * Sleep Wake debug buffer header
+ */
+typedef struct {
+ uint32_t signature;
+ uint32_t alloc_size;
+ uint32_t crc; /* CRC for spindump & following data.*/
+ uint32_t spindump_offset; /* Offset at which spindump offset is stored */
+ uint32_t spindump_size;
+ uint8_t is_osx_watchdog;
+
+ /* All members from UUID onwards are saved into log file */
+ char UUID[44];
+ char spindump_status[24]; /* stackshot status*/
+ char PMStatusCode[32];
+ char reason[32];
+} swd_hdr;
+
+
+#define SWD_HDR_SIGNATURE 0xdeb8da2a
+
+#define SWD_STACKSHOT_SIZE (40*PAGE_SIZE)
+#define SWD_COMPRESSED_BUFSIZE (5*PAGE_SIZE)
+#define SWD_ZLIB_BUFSIZE (10*PAGE_SIZE)
+#define SWD_STACKSHOT_VAR_PREFIX "sleepwake_diags"
+
+#define SWD_SPINDUMP_SIZE (256*1024)
+#define SWD_INITIAL_SPINDUMP_SIZE ((SWD_SPINDUMP_SIZE/2)-sizeof(swd_hdr))
+#define SWD_MAX_STACKSHOTS (10)
+
+/* Bits in swd_flags */
+#define SWD_WDOG_ENABLED 0x01
+#define SWD_BOOT_BY_SW_WDOG 0x02
+#define SWD_BOOT_BY_OSX_WDOG 0x04
+#define SWD_VALID_LOGS 0x08
+#define SWD_LOGS_IN_FILE 0x10
+#define SWD_LOGS_IN_MEM 0x20
+#define SWD_PWR_BTN_STACKSHOT 0x30
+
+#define SWD_DATA_CRC_ERROR 0x010000
+#define SWD_BUF_SIZE_ERROR 0x020000
+#define SWD_HDR_SIZE_ERROR 0x040000
+#define SWD_FILEOP_ERROR 0x080000
+#define SWD_HDR_SIGNATURE_ERROR 0x100000
+#define SWD_INTERNAL_FAILURE 0x200000
+
+
+/* Filenames associated with the stackshots/logs generated by the SWD */
+#define kOSWatchdogStacksFilename "/var/log/OSXWatchdogStacks.gz"
+#define kOSWatchdogFailureStringFile "/var/log/OSWatchdogFailureString.txt"
+#define kSleepWakeStacksFilename "/var/log/SleepWakeStacks.gz"
+#define kSleepWakeFailureStringFile "/var/log/SleepWakeFailureString.txt"
+
+
+/* RootDomain IOReporting channels */
+#define kSleepCntChID IOREPORT_MAKEID('S','l','e','e','p','C','n','t')
+#define kDarkWkCntChID IOREPORT_MAKEID('G','U','I','W','k','C','n','t')
+#define kUserWkCntChID IOREPORT_MAKEID('D','r','k','W','k','C','n','t')
+
+/*
+ * kAssertDelayChID - Histogram of time elapsed before assertion after wake.
+ */
+#define kAssertDelayBcktCnt 11
+#define kAssertDelayBcktSize 3
+#define kAssertDelayChID IOREPORT_MAKEID('r','d','A','s','r','t','D','l')
+
+/*
+ * kSleepDelaysChID - Histogram of time taken to put system to sleep
+ */
+#define kSleepDelaysBcktCnt 13
+#define kSleepDelaysBcktSize 10
+#define kSleepDelaysChID IOREPORT_MAKEID('r','d','S','l','p','D','l','y')
+
+/* Sleep Options/settings */
+#define kSleepOptionDisplayCapturedModeKey "DisplayCapturedMode"
+
+
+#if defined(KERNEL) && defined(__cplusplus)
+
+/*!
+ * @defined kIOPMInstallSystemSleepPolicyHandlerKey
+ * @abstract Name of the platform function to install a sleep policy handler.
+ * @discussion Pass to IOPMrootDomain::callPlatformFunction(), with a pointer
+ * to the C-function handler at param1, and an optional target at param2, to
+ * register a sleep policy handler. Only a single sleep policy handler can
+ * be installed.
+ */
+#define kIOPMInstallSystemSleepPolicyHandlerKey \
+ "IOPMInstallSystemSleepPolicyHandler"
+
+typedef IOReturn (*IOPMSystemSleepPolicyHandler)(
+ void * target,
+ const IOPMSystemSleepPolicyVariables * vars,
+ IOPMSystemSleepParameters * params );
+
+#endif /* KERNEL */
+
+/*****************************************************************************
+ *
+ * Performance Warning
+ *
+ *****************************************************************************/
+
+/* Performance Warning Key
+ * Key for performance warning event published using IOPMrootDomain::
+ * systemPowerEventOccurred()
+ */
+#define kIOPMPerformanceWarningKey "Performance_Warning"
+
+/* Performance warning values */
+enum {
+ kIOPMPerformanceNormal = 0,
+ kIOPMPerformanceWarning = 100
+};
+
+#endif /* ! _IOKIT_IOPMPRIVATE_H */
projects / apple / xnu.git / blobdiff