]> git.saurik.com Git - apple/xnu.git/blobdiff - osfmk/ppc/hw_exception.s
projects / apple / xnu.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
xnu-792.25.20.tar.gz
[apple/xnu.git] / osfmk / ppc / hw_exception.s
diff --git a/osfmk/ppc/hw_exception.s b/osfmk/ppc/hw_exception.s
index ee177d39fadb015a2a46a51c7a24962b429fee21..4c66797de05f8eb5904771f462133ad8960d84f5 100644 (file)
--- a/osfmk/ppc/hw_exception.s
+++ b/osfmk/ppc/hw_exception.s
@@ -1,24 +1,21 @@
 /*
 /*
- * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
+ * Copyright (c) 2000-2005 Apple Computer, Inc. All rights reserved.
  *
  * @APPLE_LICENSE_HEADER_START@
  * 
  *
  * @APPLE_LICENSE_HEADER_START@
  * 
- * Copyright (c) 1999-2003 Apple Computer, Inc.  All Rights Reserved.
+ * The contents of this file constitute Original Code as defined in and
+ * are subject to the Apple Public Source License Version 1.1 (the
+ * "License").  You may not use this file except in compliance with the
+ * License.  Please obtain a copy of the License at
+ * http://www.apple.com/publicsource and read it before using this file.
  * 
  * 
- * This file contains Original Code and/or Modifications of Original Code
- * as defined in and that are subject to the Apple Public Source License
- * Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
- * 
- * The Original Code and all software distributed under the License are
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * This Original Code and all software distributed under the License are
+ * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
- * Please see the License for the specific language governing rights and
- * limitations under the License.
+ * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
+ * License for the specific language governing rights and limitations
+ * under the License.
  * 
  * @APPLE_LICENSE_HEADER_END@
  */
  * 
  * @APPLE_LICENSE_HEADER_END@
  */
@@ -49,11 +46,11 @@
 #include <ppc/trap.h>
 #include <ppc/exception.h>
 #include <ppc/savearea.h>
 #include <ppc/trap.h>
 #include <ppc/exception.h>
 #include <ppc/savearea.h>
-#include <ppc/spl.h>
 
 
 #define VERIFYSAVE 0
 #define FPVECDBG 0
 
 
 #define VERIFYSAVE 0
 #define FPVECDBG 0
+#define FPFLOOD 0
 #define INSTRUMENT 0
 
 /*
 #define INSTRUMENT 0
 
 /*
@@ -95,13 +92,13 @@
                        .globl EXT(thandler)
 LEXT(thandler)                                                                         ; Trap handler
 
                        .globl EXT(thandler)
 LEXT(thandler)                                                                         ; Trap handler
 
-                       mfsprg  r25,0                                                   ; Get the per_proc 
+                       mfsprg  r13,1                                                   ; Get the current activation
+                       lwz             r25,ACT_PER_PROC(r13)                   ; Get the per_proc block 
                
                        lwz             r1,PP_ISTACKPTR(r25)                    ; Get interrupt stack pointer
        
                
                        lwz             r1,PP_ISTACKPTR(r25)                    ; Get interrupt stack pointer
        
-                       mfsprg  r13,1                                                   ; Get the current thread
                        cmpwi   cr0,r1,0                                                ; Are we on interrupt stack?                                    
                        cmpwi   cr0,r1,0                                                ; Are we on interrupt stack?                                    
-                       lwz             r6,ACT_THREAD(r13)                              ; Get the shuttle
+                       mr              r6,r13
                        beq-    cr0,EXT(ihandler)                               ; If on interrupt stack, treat this as interrupt...
                        lwz             r26,ACT_MACT_SPF(r13)                   ; Get special flags
                        lwz             r8,ACT_MACT_PCB(r13)                    ; Get the last savearea used
                        beq-    cr0,EXT(ihandler)                               ; If on interrupt stack, treat this as interrupt...
                        lwz             r26,ACT_MACT_SPF(r13)                   ; Get special flags
                        lwz             r8,ACT_MACT_PCB(r13)                    ; Get the last savearea used
@@ -125,7 +122,7 @@ LEXT(thandler)                                                                              ; Trap handler
                        subi    r1,r26,FM_REDZONE                               ; Make a red zone on interrupt time kernel stack
 
 .L_kstackfree:
                        subi    r1,r26,FM_REDZONE                               ; Make a red zone on interrupt time kernel stack
 
 .L_kstackfree:
-                       lwz             r7,savesrr1+4(r4)                               ; Pick up the entry MSR 
+                       lwz             r31,savesrr1+4(r4)                              ; Pick up the entry MSR 
                        sub             r9,r1,r9                                                ; Get displacment into the kernel stack
                        li              r0,0                                                    ; Make this 0
                        rlwinm. r0,r9,0,28,31                                   ; Verify that we have a 16-byte aligned stack (and get a 0)
                        sub             r9,r1,r9                                                ; Get displacment into the kernel stack
                        li              r0,0                                                    ; Make this 0
                        rlwinm. r0,r9,0,28,31                                   ; Verify that we have a 16-byte aligned stack (and get a 0)
@@ -137,7 +134,7 @@ LEXT(thandler)                                                                              ; Trap handler
 .L_state_on_kstack:    
                        lwz             r9,savevrsave(r4)                               ; Get the VRSAVE register
                        bne--   kernelStackUnaligned                    ; Stack is unaligned...
 .L_state_on_kstack:    
                        lwz             r9,savevrsave(r4)                               ; Get the VRSAVE register
                        bne--   kernelStackUnaligned                    ; Stack is unaligned...
-                       rlwinm. r6,r7,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on?
+                       rlwinm. r6,r31,0,MSR_VEC_BIT,MSR_VEC_BIT        ; Was vector on?
                        subi    r1,r1,FM_SIZE                                   ; Push a header onto the current stack 
                        bgt--   cr2,kernelStackBad                              ; Kernel stack is bogus...
 
                        subi    r1,r1,FM_SIZE                                   ; Push a header onto the current stack 
                        bgt--   cr2,kernelStackBad                              ; Kernel stack is bogus...
 
@@ -157,16 +154,20 @@ tvecoff:  stw             r26,FM_BACKPTR(r1)                              ; Link back to the previous frame
                        stwu    r1,     -FM_SIZE(r1)                            ; and make new frame 
 #endif /* DEBUG */
 
                        stwu    r1,     -FM_SIZE(r1)                            ; and make new frame 
 #endif /* DEBUG */
 
+                       mr              r30,r4
+                       lwz             r3,SAVtime+4(r4)
+                       addi    r4,r13,SYSTEM_TIMER
+                       bl              EXT(timer_event)
 
 /* call trap handler proper, with
 
 /* call trap handler proper, with
- *   ARG0 = type               (not yet, holds pcb ptr)
- *   ARG1 = saved_state ptr    (already there)
- *   ARG2 = dsisr              (already there)
- *   ARG3 = dar                        (already there)
+ *   ARG0 = type
+ *   ARG1 = saved_state ptr
+ *   ARG2 = dsisr
+ *   ARG3 = dar
  */
 
  */
 
-
-                       lwz             r3,saveexception(r4)                    ; Get the exception code 
+                       mr              r4,r30
+                       lwz             r3,saveexception(r30)                   ; Get the exception code 
                        lwz             r0,ACT_MACT_SPF(r13)                    ; Get the special flags
                        
                        addi    r5,r3,-T_DATA_ACCESS                    ; Adjust to start of range
                        lwz             r0,ACT_MACT_SPF(r13)                    ; Get the special flags
                        
                        addi    r5,r3,-T_DATA_ACCESS                    ; Adjust to start of range
@@ -176,7 +177,7 @@ tvecoff:    stw             r26,FM_BACKPTR(r1)                              ; Link back to the previous frame
                        lwz             r5,savedsisr(r4)                                ; Get the saved DSISR
                        
                        crnor   cr7_eq,cr0_eq,cr2_gt                    ; We should intercept if in VM and is a true trap (cr7_eq == 1 if yes)
                        lwz             r5,savedsisr(r4)                                ; Get the saved DSISR
                        
                        crnor   cr7_eq,cr0_eq,cr2_gt                    ; We should intercept if in VM and is a true trap (cr7_eq == 1 if yes)
-                       rlwinm. r0,r7,0,MSR_PR_BIT,MSR_PR_BIT   ; Are we trapping from supervisor state? (cr0_eq == 1 if yes)
+                       rlwinm. r0,r31,0,MSR_PR_BIT,MSR_PR_BIT  ; Are we trapping from supervisor state? (cr0_eq == 1 if yes)
 
                        cmpi    cr2,r3,T_PREEMPT                                ; Is this a preemption?
 
 
                        cmpi    cr2,r3,T_PREEMPT                                ; Is this a preemption?
 
@@ -198,6 +199,10 @@ tvecoff:   stw             r26,FM_BACKPTR(r1)                              ; Link back to the previous frame
 
 .L_call_trap:  
 
 
 .L_call_trap:  
 
+#if FPFLOOD
+                       stfd    f31,emfp31(r25)                                 ; (TEST/DEBUG)
+#endif
+                       
                        bl      EXT(trap)
 
                        lis             r10,hi16(MASK(MSR_VEC))                 ; Get the vector enable
                        bl      EXT(trap)
 
                        lis             r10,hi16(MASK(MSR_VEC))                 ; Get the vector enable
@@ -205,7 +210,8 @@ tvecoff:    stw             r26,FM_BACKPTR(r1)                              ; Link back to the previous frame
                        ori             r10,r10,lo16(MASK(MSR_FP)|MASK(MSR_EE)) ; Add in FP and EE
                        andc    r7,r7,r10                                               ; Turn off VEC, FP, and EE
                        mtmsr   r7                                                              ; Disable for interrupts
                        ori             r10,r10,lo16(MASK(MSR_FP)|MASK(MSR_EE)) ; Add in FP and EE
                        andc    r7,r7,r10                                               ; Turn off VEC, FP, and EE
                        mtmsr   r7                                                              ; Disable for interrupts
-                       mfsprg  r10,0                                                   ; Restore the per_proc info
+                       mfsprg  r8,1                                                    ; Get the current activation
+                       lwz             r10,ACT_PER_PROC(r8)                    ; Get the per_proc block 
 /*
  * This is also the point where new threads come when they are created.
  * The new thread is setup to look like a thread that took an 
 /*
  * This is also the point where new threads come when they are created.
  * The new thread is setup to look like a thread that took an 
@@ -219,7 +225,7 @@ thread_return:
                        mfsprg  r8,1                                                    ; Get the current thread
                        rlwinm  r11,r11,0,15,13                                 ; Clear the syscall flag
                        rlwinm. r0,r0,0,MSR_PR_BIT,MSR_PR_BIT   ; Are we going to the user?
                        mfsprg  r8,1                                                    ; Get the current thread
                        rlwinm  r11,r11,0,15,13                                 ; Clear the syscall flag
                        rlwinm. r0,r0,0,MSR_PR_BIT,MSR_PR_BIT   ; Are we going to the user?
-                       lwz             r1,ACT_THREAD(r8)                               ; Get the shuttle
+                       mr              r1,r8
                        stw             r11,SAVflags(r3)                                ; Save back the flags (with reset stack cleared) 
                        
                        lwz             r5,THREAD_KERNEL_STACK(r1)              ; Get the base pointer to the stack 
                        stw             r11,SAVflags(r3)                                ; Save back the flags (with reset stack cleared) 
                        
                        lwz             r5,THREAD_KERNEL_STACK(r1)              ; Get the base pointer to the stack 
@@ -292,16 +298,16 @@ kernelStackUnaligned:
 LEXT(shandler)                                                                         ; System call handler
 
                        lwz             r7,savesrr1+4(r4)                               ; Get the SRR1 value
 LEXT(shandler)                                                                         ; System call handler
 
                        lwz             r7,savesrr1+4(r4)                               ; Get the SRR1 value
-                       mfsprg  r25,0                                                   ; Get the per proc area 
+                       mfsprg  r13,1                                                   ; Get the current activation
+                       lwz             r25,ACT_PER_PROC(r13)                   ; Get the per_proc block 
                        lwz             r0,saver0+4(r4)                                 ; Get the original syscall number
                        lwz             r17,PP_ISTACKPTR(r25)                   ; Get interrupt stack pointer
                        lwz             r0,saver0+4(r4)                                 ; Get the original syscall number
                        lwz             r17,PP_ISTACKPTR(r25)                   ; Get interrupt stack pointer
-                       mfsprg  r13,1                                                   ; Get the current thread 
                        rlwinm  r15,r0,0,0,19                                   ; Clear the bottom of call number for fast check
                        mr.             r17,r17                                                 ; Are we on interrupt stack?
                        lwz             r9,savevrsave(r4)                               ; Get the VRsave register
                        beq--   EXT(ihandler)                                   ; On interrupt stack, not allowed...
                        rlwinm. r6,r7,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on?
                        rlwinm  r15,r0,0,0,19                                   ; Clear the bottom of call number for fast check
                        mr.             r17,r17                                                 ; Are we on interrupt stack?
                        lwz             r9,savevrsave(r4)                               ; Get the VRsave register
                        beq--   EXT(ihandler)                                   ; On interrupt stack, not allowed...
                        rlwinm. r6,r7,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on?
-                       lwz             r16,ACT_THREAD(r13)                             ; Get the shuttle
+                       mr              r16,r13
 
                        beq++   svecoff                                                 ; Vector off, do not save vrsave...
                        stw             r9,liveVRS(r25)                                 ; Set the live value
 
                        beq++   svecoff                                                 ; Vector off, do not save vrsave...
                        stw             r9,liveVRS(r25)                                 ; Set the live value
@@ -351,6 +357,10 @@ noassist:  cmplwi  r15,0x7000                                              ; Do we have a fast path trap?
                        mr              r30,r4                                                  ; Save pointer to the new context savearea
                        stw             r0,ACT_MACT_KSP(r13)                    ; Mark stack as busy with 0 val 
                        stw             r15,FM_BACKPTR(r1)                              ; Link stack frame backwards
                        mr              r30,r4                                                  ; Save pointer to the new context savearea
                        stw             r0,ACT_MACT_KSP(r13)                    ; Mark stack as busy with 0 val 
                        stw             r15,FM_BACKPTR(r1)                              ; Link stack frame backwards
+
+                       lwz             r3,SAVtime+4(r30)
+                       addi    r4,r13,SYSTEM_TIMER
+                       bl              EXT(timer_event)
                
 #if    DEBUG
 /* If debugging, we need two frames, the first being a dummy
                
 #if    DEBUG
 /* If debugging, we need two frames, the first being a dummy
@@ -362,10 +372,12 @@ noassist: cmplwi  r15,0x7000                                              ; Do we have a fast path trap?
                        stwu    r1,     -FM_SIZE(r1)                            ; and make new frame
 #endif /* DEBUG */
 
                        stwu    r1,     -FM_SIZE(r1)                            ; and make new frame
 #endif /* DEBUG */
 
+                       mr              r4,r30
+
                        lwz             r15,SAVflags(r30)                               ; Get the savearea flags
                        lwz             r0,saver0+4(r30)                                ; Get R0 back
                        mfmsr   r11                                                             ; Get the MSR
                        lwz             r15,SAVflags(r30)                               ; Get the savearea flags
                        lwz             r0,saver0+4(r30)                                ; Get R0 back
                        mfmsr   r11                                                             ; Get the MSR
-                       stwu    r1,-(FM_SIZE+ARG_SIZE)(r1)              ; Make a stack frame
+                       stwu    r1,-(FM_SIZE+ARG_SIZE+MUNGE_ARGS_SIZE)(r1)              ; Make a stack frame
                        ori             r11,r11,lo16(MASK(MSR_EE))              ; Turn on interruption enabled bit
                        rlwinm  r10,r0,0,0,19                                   ; Keep only the top part 
                        oris    r15,r15,SAVsyscall >> 16                ; Mark that it this is a syscall
                        ori             r11,r11,lo16(MASK(MSR_EE))              ; Turn on interruption enabled bit
                        rlwinm  r10,r0,0,0,19                                   ; Keep only the top part 
                        oris    r15,r15,SAVsyscall >> 16                ; Mark that it this is a syscall
@@ -389,6 +401,11 @@ noassist:  cmplwi  r15,0x7000                                              ; Do we have a fast path trap?
                        mr      r4,r13                                                  ; current activation
                        addi    r7,r7,1                                                 ; Bump it
                        stw     r7,TASK_SYSCALLS_UNIX(r8)               ; Save it
                        mr      r4,r13                                                  ; current activation
                        addi    r7,r7,1                                                 ; Bump it
                        stw     r7,TASK_SYSCALLS_UNIX(r8)               ; Save it
+
+#if FPFLOOD
+                       stfd    f31,emfp31(r25)                                 ; (TEST/DEBUG)
+#endif
+
                        bl      EXT(unix_syscall)                               ; Check out unix...
 
 .L_call_server_syscall_exception:              
                        bl      EXT(unix_syscall)                               ; Check out unix...
 
 .L_call_server_syscall_exception:              
@@ -417,7 +434,7 @@ noassist:   cmplwi  r15,0x7000                                              ; Do we have a fast path trap?
 ;                      and the savearea/pcb as the first parameter.
 ;                      It is up to the callee to enable interruptions if
 ;                      they should be.  We are in a state here where
 ;                      and the savearea/pcb as the first parameter.
 ;                      It is up to the callee to enable interruptions if
 ;                      they should be.  We are in a state here where
-;                      both interrupts and preemption is ok, but because we could
+;                      both interrupts and preemption are ok, but because we could
 ;                      be calling diagnostic code we will not enable.
 ;                      
 ;                      Also, the callee is responsible for finding any parameters
 ;                      be calling diagnostic code we will not enable.
 ;                      
 ;                      Also, the callee is responsible for finding any parameters
@@ -473,7 +490,8 @@ LEXT(ppcscret)
                        mr.             r3,r3                                                   ; See what we should do
                        mr              r31,r16                                                 ; Restore the current thread pointer
                        bgt+    .L_thread_syscall_ret_check_ast ; Take normal AST checking return....
                        mr.             r3,r3                                                   ; See what we should do
                        mr              r31,r16                                                 ; Restore the current thread pointer
                        bgt+    .L_thread_syscall_ret_check_ast ; Take normal AST checking return....
-                       mfsprg  r10,0                                                   ; Get the per_proc
+                       mfsprg  r10,1                                                   ; Get the current activation
+                       lwz             r10,ACT_PER_PROC(r10)                   ; Get the per_proc block 
                        blt+    .L_thread_syscall_return                ; Return, but no ASTs....
                        lwz             r0,saver0+4(r30)                                ; Restore the system call number
                        b               .L_call_server_syscall_exception        ; Go to common exit...
                        blt+    .L_thread_syscall_return                ; Return, but no ASTs....
                        lwz             r0,saver0+4(r30)                                ; Restore the system call number
                        b               .L_call_server_syscall_exception        ; Go to common exit...
@@ -486,35 +504,36 @@ LEXT(ppcscret)
  */
        
 ksystrace:     
  */
        
 ksystrace:     
-                       mr              r4,r30                                          ; Pass in saved state
+                       mr              r4,r30                                                  ; Pass in saved state
                        bl      EXT(syscall_trace)
                        
                        bl      EXT(syscall_trace)
                        
-                       cmplw   r31,r29                                         ; Is this syscall in the table? 
-                       add             r31,r27,r28                                     ; Point right to the syscall table entry
+                       cmplw   r31,r29                                                 ; Is this syscall in the table? 
+                       add             r31,r27,r28                                             ; Point right to the syscall table entry
 
                        bge-    .L_call_server_syscall_exception        ; The syscall number is invalid
        
 
                        bge-    .L_call_server_syscall_exception        ; The syscall number is invalid
        
-                       lwz             r0,MACH_TRAP_FUNCTION(r31)      ; Pick up the function address
-;
-;      NOTE: We do not support more than 8 parameters for PPC.  The only 
-;      system call to use more than 8 is mach_msg_overwrite_trap and it
-;      uses 9.  We pass a 0 in as number 9.
-;
-                       lwz             r3,saver3+4(r30)                        ; Restore r3 
-                       lwz             r4,saver4+4(r30)                        ; Restore r4 
-                       mtctr   r0                                                      ; Set the function call address
-                       lwz             r5,saver5+4(r30)                        ; Restore r5 
-                       lwz             r6,saver6+4(r30)                        ; Restore r6
-                       lwz             r7,saver7+4(r30)                        ; Restore r7
-                       li              r0,0                                            ; Clear this out
-                       lwz             r8,saver8+4(r30)                        ; Restore r8 
-                       lwz             r9,saver9+4(r30)                        ; Restore r9 
-                       lwz             r10,saver10+4(r30)              ; Restore r10
-                       stw             r0,FM_ARG0(r1)                          ; Clear that 9th parameter just in case some fool uses it
-                       bctrl                                                           ; perform the actual syscall
-       
-                       mr              r4,r30                                          ; Pass in the savearea
-                       bl              EXT(syscall_trace_end)          ; Trace the exit of the system call     
+                       lwz     r0,savesrr1(r30)                                ; Get the saved srr1
+                       rlwinm. r0,r0,0,MSR_SF_BIT,MSR_SF_BIT   ; Test for 64 bit caller
+                       lwz             r0,MACH_TRAP_ARG_MUNGE32(r31)   ; Pick up the 32 bit munge function address
+                       beq--   .L_ksystrace_munge
+                       lwz             r0,MACH_TRAP_ARG_MUNGE64(r31)   ; Pick up the 64 bit munge function address
+
+.L_ksystrace_munge:
+                       cmplwi  r0,0                                                    ; do we have a munger to call?
+                       mtctr   r0                                                              ; Set the function call address
+                       addi    r3,r30,saver3                                   ; Pointer to args from save area
+                       addi    r4,r1,FM_ARG0+ARG_SIZE                  ; Pointer for munged args
+                       beq--   .L_ksystrace_trapcall                   ; just make the trap call
+                       bctrl                                                                   ; Call the munge function
+
+.L_ksystrace_trapcall:         
+                       lwz             r0,MACH_TRAP_FUNCTION(r31)              ; Pick up the function address
+                       mtctr   r0                                                              ; Set the function call address
+                       addi    r3,r1,FM_ARG0+ARG_SIZE                  ; Pointer to munged args
+                       bctrl
+
+                       mr              r4,r30                                                  ; Pass in the savearea
+                       bl              EXT(syscall_trace_end)                  ; Trace the exit of the system call     
                        b               .L_mach_return
 
        
                        b               .L_mach_return
 
        
@@ -534,46 +553,55 @@ ksystrace:
 ; Call a function that can print out our syscall info 
 ; Note that we don t care about any volatiles yet
 ;
 ; Call a function that can print out our syscall info 
 ; Note that we don t care about any volatiles yet
 ;
-                       lwz             r10,ACT_TASK(r13)                       ; Get our task 
+                       lwz             r10,ACT_TASK(r13)                               ; Get our task 
                        lwz             r0,saver0+4(r30)
                        lwz             r0,saver0+4(r30)
-                       lis             r8,hi16(EXT(kdebug_enable))     ; Get top of kdebug_enable 
+                       lis             r8,hi16(EXT(kdebug_enable))             ; Get top of kdebug_enable 
                        lis             r28,hi16(EXT(mach_trap_table))  ; Get address of table
                        ori             r8,r8,lo16(EXT(kdebug_enable))  ; Get bottom of kdebug_enable 
                        lis             r28,hi16(EXT(mach_trap_table))  ; Get address of table
                        ori             r8,r8,lo16(EXT(kdebug_enable))  ; Get bottom of kdebug_enable 
-                       lwz             r8,0(r8)                                        ; Get kdebug_enable 
+                       lwz             r8,0(r8)                                                ; Get kdebug_enable 
 
 
-                       lwz             r7,TASK_SYSCALLS_MACH(r10)      ; Get the current count
-                       neg             r31,r0                                          ; Make this positive
-                       slwi    r27,r31,MACH_TRAP_OFFSET_POW2   ; Convert index to offset
+                       lwz             r7,TASK_SYSCALLS_MACH(r10)              ; Get the current count
+                       neg             r31,r0                                                  ; Make this positive
+                       mr              r3,r31                                                  ; save it
+                       slwi    r27,r3,4                                                ; multiply by 16
+                       slwi    r3,r3,2                                                 ; and the original by 4
                        ori             r28,r28,lo16(EXT(mach_trap_table))      ; Get address of table
                        ori             r28,r28,lo16(EXT(mach_trap_table))      ; Get address of table
-                       addi    r7,r7,1                                         ; Bump TASK_SYSCALLS_MACH count
-                       cmplwi  r8,0                                            ; Is kdebug_enable non-zero
-                       stw             r7,TASK_SYSCALLS_MACH(r10)      ; Save count
-                       bne--   ksystrace                                       ; yes, tracing enabled
+                       add             r27,r27,r3                                              ; for a total of 20x (5 words/entry)
+                       addi    r7,r7,1                                                 ; Bump TASK_SYSCALLS_MACH count
+                       cmplwi  r8,0                                                    ; Is kdebug_enable non-zero
+                       stw             r7,TASK_SYSCALLS_MACH(r10)              ; Save count
+                       bne--   ksystrace                                               ; yes, tracing enabled
                        
                        
-                       cmplwi  r31,MACH_TRAP_TABLE_COUNT       ; Is this syscall in the table? 
-                       add             r31,r27,r28                                     ; Point right to the syscall table entry
+                       cmplwi  r31,MACH_TRAP_TABLE_COUNT               ; Is this syscall in the table? 
+                       add             r31,r27,r28                                             ; Point right to the syscall table entry
 
                        bge--   .L_call_server_syscall_exception        ; The syscall number is invalid
 
                        bge--   .L_call_server_syscall_exception        ; The syscall number is invalid
-       
-                       lwz             r0,MACH_TRAP_FUNCTION(r31)      ; Pick up the function address
 
 
-;
-;      NOTE: We do not support more than 8 parameters for PPC.  The only 
-;      system call to use more than 8 is mach_msg_overwrite_trap and it
-;      uses 9.  We pass a 0 in as number 9.
-;
-                       lwz             r3,saver3+4(r30)                        ; Restore r3 
-                       lwz             r4,saver4+4(r30)                        ; Restore r4 
-                       lwz             r5,saver5+4(r30)                        ; Restore r5 
-                       mtctr   r0                                                      ; Set the function call address
-                       lwz             r6,saver6+4(r30)                        ; Restore r6
-                       lwz             r7,saver7+4(r30)                        ; Restore r7
-                       lwz             r8,saver8+4(r30)                        ; Restore r8 
-                       li              r0,0                                            ; Clear this out
-                       lwz             r9,saver9+4(r30)                        ; Restore r9 
-                       lwz             r10,saver10+4(r30)              ; Restore r10
-                       stw             r0,FM_ARG0(r1)                          ; Clear that 9th parameter just in case some fool uses it
-                       bctrl                                                           ; perform the actual syscall
+                       lwz     r0,savesrr1(r30)                                ; Get the saved srr1
+                       rlwinm. r0,r0,0,MSR_SF_BIT,MSR_SF_BIT   ; Test for 64 bit caller
+                       lwz             r0,MACH_TRAP_ARG_MUNGE32(r31)   ; Pick up the 32 bit munge function address
+                       beq--   .L_kernel_syscall_munge
+                       lwz             r0,MACH_TRAP_ARG_MUNGE64(r31)   ; Pick up the 64 bit munge function address
+
+.L_kernel_syscall_munge:
+                       cmplwi  r0,0                                                    ; test for null munger
+                       mtctr   r0                                                              ; Set the function call address
+                       addi    r3,r30,saver3                                   ; Pointer to args from save area
+                       addi    r4,r1,FM_ARG0+ARG_SIZE                  ; Pointer for munged args
+                       beq--   .L_kernel_syscall_trapcall              ; null munger - skip to trap call
+                       bctrl                                                                   ; Call the munge function
+
+.L_kernel_syscall_trapcall:            
+                       lwz             r0,MACH_TRAP_FUNCTION(r31)              ; Pick up the function address
+                       mtctr   r0                                                              ; Set the function call address
+                       addi    r3,r1,FM_ARG0+ARG_SIZE                  ; Pointer to munged args
+
+#if FPFLOOD
+                       stfd    f31,emfp31(r25)                                 ; (TEST/DEBUG)
+#endif
+
+                       bctrl
+
 
 /*
  * Ok, return from C function, R3 = return value
 
 /*
  * Ok, return from C function, R3 = return value
@@ -582,11 +610,13 @@ ksystrace:
  * saved state is still in R30 and the active thread is in R16
  */
 
  * saved state is still in R30 and the active thread is in R16
  */
 
-.L_mach_return:        
-                       mr              r31,r16                                         ; Move the current thread pointer
-                       stw             r3,saver3+4(r30)                                ; Stash the return code
-                       cmpi            cr0,r3,KERN_INVALID_ARGUMENT                    ; deal with invalid system calls
-                       beq-            cr0,.L_mach_invalid_ret                         ; otherwise fall through into the normal return path
+.L_mach_return:
+                       srawi  r0,r3,31                                                 ; properly extend the return code
+                       cmpi    cr0,r3,KERN_INVALID_ARGUMENT    ; deal with invalid system calls
+                       mr              r31,r16                                                 ; Move the current thread pointer
+                       stw             r0, saver3(r30)                                 ; stash the high part of the return code
+                       stw             r3,saver3+4(r30)                                ; Stash the low part of the return code
+                       beq--   cr0,.L_mach_invalid_ret                 ; otherwise fall through into the normal return path
 .L_mach_invalid_arg:           
 
 
 .L_mach_invalid_arg:           
 
 
@@ -609,12 +639,12 @@ ksystrace:
                        andc    r12,r12,r10                                             ; Turn off VEC, FP, and EE
                        mtmsr   r12                                                             ; Turn interruptions off
                        
                        andc    r12,r12,r10                                             ; Turn off VEC, FP, and EE
                        mtmsr   r12                                                             ; Turn interruptions off
                        
-                       mfsprg  r10,0                                                   ; Get the per_processor block
+                       mfsprg  r10,1                                                   ; Get the current activation
+                       lwz             r10,ACT_PER_PROC(r10)                   ; Get the per_proc block 
 
 /* Check to see if there's an outstanding AST */
                
 
 /* Check to see if there's an outstanding AST */
                
-                       lwz             r4,PP_NEED_AST(r10)                             ; Get the pointer to the ast requests
-                       lwz             r4,0(r4)                                                ; Get the flags
+                       lwz             r4,PP_PENDING_AST(r10)
                        cmpi    cr0,r4, 0                                               ; Any pending asts?
                        beq++   cr0,.L_syscall_no_ast                   ; Nope...
 
                        cmpi    cr0,r4, 0                                               ; Any pending asts?
                        beq++   cr0,.L_syscall_no_ast                   ; Nope...
 
@@ -637,8 +667,9 @@ ksystrace:
 scrnotkern:            
 #endif /* DEBUG */
        
 scrnotkern:            
 #endif /* DEBUG */
        
-                       li              r3,AST_ALL                                              ; Set ast flags
+                       lis             r3,hi16(AST_ALL)                                ; Set ast flags
                        li              r4,1                                                    ; Set interrupt allowed
                        li              r4,1                                                    ; Set interrupt allowed
+                       ori             r3,r3,lo16(AST_ALL)
                        bl              EXT(ast_taken)                                  ; Process the pending ast
                        b               .L_thread_syscall_ret_check_ast ; Go see if there was another...
 
                        bl              EXT(ast_taken)                                  ; Process the pending ast
                        b               .L_thread_syscall_ret_check_ast ; Go see if there was another...
 
@@ -649,10 +680,13 @@ scrnotkern:
  * then we want to throw an exception... otherwise
  * we want to pass the error code back to the caller
  */
  * then we want to throw an exception... otherwise
  * we want to pass the error code back to the caller
  */
-                       lwz     r0,saver0+4(r30)                                ; reload the original syscall number
+                       lwz             r0,saver0+4(r30)                                ; reload the original syscall number
                        neg             r28,r0                                                  ; Make this positive
                        neg             r28,r0                                                  ; Make this positive
-                       slwi    r27,r28,MACH_TRAP_OFFSET_POW2   ; Convert index to offset
+                       mr              r4,r28                                                  ; save a copy
+                       slwi    r27,r4,4                                                ; multiply by 16
+                       slwi    r4,r4,2                                                 ; and another 4
                        lis             r28,hi16(EXT(mach_trap_table))  ; Get address of table
                        lis             r28,hi16(EXT(mach_trap_table))  ; Get address of table
+                       add             r27,r27,r4                                              ; for a total of 20x (5 words/entry)
                        ori             r28,r28,lo16(EXT(mach_trap_table))      ; Get address of table
                        add             r28,r27,r28                                             ; Point right to the syscall table entry
                        lwz             r27,MACH_TRAP_FUNCTION(r28)             ; Pick up the function address
                        ori             r28,r28,lo16(EXT(mach_trap_table))      ; Get address of table
                        add             r28,r27,r28                                             ; Point right to the syscall table entry
                        lwz             r27,MACH_TRAP_FUNCTION(r28)             ; Pick up the function address
@@ -716,9 +750,9 @@ LEXT(thread_exception_return)                                               ; Directly return to user mode
    frame, given that we're not going to return.  
 */
                
    frame, given that we're not going to return.  
 */
                
-                       mfsprg  r10,0                                                   ; Get the per_processor block 
-                       lwz             r4,PP_NEED_AST(r10)
-                       lwz             r4,0(r4)
+                       mfsprg  r10,1                                                   ; Get the current activation
+                       lwz             r10,ACT_PER_PROC(r10)                   ; Get the per_proc block 
+                       lwz             r4,PP_PENDING_AST(r10)
                        cmpi    cr0,r4, 0
                        beq+            cr0,.L_exc_ret_no_ast
                
                        cmpi    cr0,r4, 0
                        beq+            cr0,.L_exc_ret_no_ast
                
@@ -727,8 +761,9 @@ LEXT(thread_exception_return)                                               ; Directly return to user mode
  * ast_taken will save all state and bring us back here
  */
        
  * ast_taken will save all state and bring us back here
  */
        
-                       li              r3,AST_ALL
+                       lis             r3,hi16(AST_ALL)
                        li              r4,1
                        li              r4,1
+                       ori             r3,r3,lo16(AST_ALL)
                        
                        bl              EXT(ast_taken)
                        b               .L_thread_exc_ret_check_ast             ; check for a second AST (rare)
                        
                        bl              EXT(ast_taken)
                        b               .L_thread_exc_ret_check_ast             ; check for a second AST (rare)
@@ -739,7 +774,7 @@ LEXT(thread_exception_return)                                               ; Directly return to user mode
 .L_exc_ret_no_ast:
                        
                        mfsprg  r30,1                                                   ; Get the currrent activation
 .L_exc_ret_no_ast:
                        
                        mfsprg  r30,1                                                   ; Get the currrent activation
-                       lwz             r31,ACT_THREAD(r30)                             ; Get the current thread
+                       mr              r31,r30
 
                        lwz             r30,ACT_MACT_PCB(r30)
                        mr.             r30,r30                                                 ; Is there any context yet?
 
                        lwz             r30,ACT_MACT_PCB(r30)
                        mr.             r30,r30                                                 ; Is there any context yet?
@@ -821,11 +856,11 @@ LEXT(ihandler)                                                                            ; Interrupt handler */
 
                        lwz             r10,savesrr1+4(r4)                              ; Get SRR1 
                        lwz             r7,savevrsave(r4)                               ; Get the VRSAVE register
 
                        lwz             r10,savesrr1+4(r4)                              ; Get SRR1 
                        lwz             r7,savevrsave(r4)                               ; Get the VRSAVE register
-                       mfsprg  r25,0                                                   ; Get the per_proc block
+                       mfsprg  r13,1                                                   ; Get the current activation
+                       lwz             r25,ACT_PER_PROC(r13)                   ; Get the per_proc block 
                        li              r14,0                                                   ; Zero this for now
                        li              r14,0                                                   ; Zero this for now
-                       rlwinm. r13,r10,0,MSR_VEC_BIT,MSR_VEC_BIT       ; Was vector on?
+                       rlwinm. r16,r10,0,MSR_VEC_BIT,MSR_VEC_BIT       ; Was vector on?
                        lwz             r1,PP_ISTACKPTR(r25)                    ; Get the interrupt stack
                        lwz             r1,PP_ISTACKPTR(r25)                    ; Get the interrupt stack
-                       mfsprg  r13,1                                                   ; Get the current thread
                        li              r16,0                                                   ; Zero this for now
 
                        beq+    ivecoff                                                 ; Vector off, do not save vrsave...
                        li              r16,0                                                   ; Zero this for now
 
                        beq+    ivecoff                                                 ; Vector off, do not save vrsave...
@@ -835,7 +870,7 @@ ivecoff:    li              r0,0                                                    ; Get a constant 0
                        rlwinm  r5,r10,0,MSR_PR_BIT,MSR_PR_BIT  ; Are we trapping from supervisor state?
                        mr.             r1,r1                                                   ; Is it active?
                        cmplwi  cr2,r5,0                                                ; cr2_eq == 1 if yes
                        rlwinm  r5,r10,0,MSR_PR_BIT,MSR_PR_BIT  ; Are we trapping from supervisor state?
                        mr.             r1,r1                                                   ; Is it active?
                        cmplwi  cr2,r5,0                                                ; cr2_eq == 1 if yes
-                       lwz             r16,ACT_THREAD(r13)                             ; Get the shuttle
+                       mr              r16,r13
                        lwz             r14,ACT_MACT_PCB(r13)                   ; Now point to the PCB 
                        lwz             r9,saver1+4(r4)                                 ; Pick up the rupt time stack
                        stw             r14,SAVprev+4(r4)                               ; Queue the new save area in the front
                        lwz             r14,ACT_MACT_PCB(r13)                   ; Now point to the PCB 
                        lwz             r9,saver1+4(r4)                                 ; Pick up the rupt time stack
                        stw             r14,SAVprev+4(r4)                               ; Queue the new save area in the front
@@ -911,9 +946,22 @@ ihbootnover:                                                                               ; (TEST/DEBUG)
                        stwu    r1,-FM_SIZE(r1)                                 ; Make another new frame for C routine
 #endif /* DEBUG */
 
                        stwu    r1,-FM_SIZE(r1)                                 ; Make another new frame for C routine
 #endif /* DEBUG */
 
-                       lwz             r5,savedsisr(r4)                                ; Get the DSISR
-                       lwz             r6,savedar+4(r4)                                ; Get the DAR 
+                       mr              r31,r3
+                       mr              r30,r4
+
+                       lwz             r3,SAVtime+4(r4)
+                       addi    r4,r13,SYSTEM_TIMER
+                       bl              EXT(timer_event)
+
+                       mr              r3,r31
+                       mr              r4,r30
+                       lwz             r5,savedsisr(r30)                               ; Get the DSISR
+                       lwz             r6,savedar+4(r30)                               ; Get the DAR 
                        
                        
+#if FPFLOOD
+                       stfd    f31,emfp31(r25)                                 ; (TEST/DEBUG)
+#endif
+
                        bl      EXT(interrupt)
 
 
                        bl      EXT(interrupt)
 
 
@@ -930,14 +978,13 @@ LEXT(ihandler_ret)                                                                        ; Marks our return point from debugger entry
                        ori             r10,r10,lo16(MASK(MSR_FP)|MASK(MSR_EE)) ; Add in FP and EE
                        andc    r0,r0,r10                                               ; Turn off VEC, FP, and EE
                        mtmsr   r0                                                              ; Make sure interrupts are disabled
                        ori             r10,r10,lo16(MASK(MSR_FP)|MASK(MSR_EE)) ; Add in FP and EE
                        andc    r0,r0,r10                                               ; Turn off VEC, FP, and EE
                        mtmsr   r0                                                              ; Make sure interrupts are disabled
-                       mfsprg  r10,0                                                   ; Get the per_proc block
+                       mfsprg  r8,1                                                    ; Get the current activation
+                       lwz             r10,ACT_PER_PROC(r8)                    ; Get the per_proc block 
                
                        lwz             r7,SAVflags(r3)                                 ; Pick up the flags
                
                        lwz             r7,SAVflags(r3)                                 ; Pick up the flags
-                       mfsprg  r8,1                                                    ; Get the current thread
-                       lwz             r9,SAVprev+4(r3)                                        ; Get previous save area
+                       lwz             r9,SAVprev+4(r3)                                ; Get previous save area
                        cmplwi  cr1,r8,0                                                ; Are we still initializing?
                        lwz             r12,savesrr1+4(r3)                              ; Get the MSR we will load on return 
                        cmplwi  cr1,r8,0                                                ; Are we still initializing?
                        lwz             r12,savesrr1+4(r3)                              ; Get the MSR we will load on return 
-                       lwz             r8,THREAD_TOP_ACT(r8)                   ; Pick up the active thread 
                        andis.  r11,r7,hi16(SAVrststk)                  ; Is this the first on the stack?
                        stw             r9,ACT_MACT_PCB(r8)                             ; Point to previous context savearea 
                        mr              r4,r3                                                   ; Move the savearea pointer
                        andis.  r11,r7,hi16(SAVrststk)                  ; Is this the first on the stack?
                        stw             r9,ACT_MACT_PCB(r8)                             ; Point to previous context savearea 
                        mr              r4,r3                                                   ; Move the savearea pointer
@@ -958,8 +1005,7 @@ LEXT(ihandler_ret)                                                                 ; Marks our return point from debugger entry
                        cmplwi  r3, 0                                                   ; Check for preemption
                        bne             .L_no_int_ast                                   ; Do not preempt if level is not zero
                        andi.   r6,r12,MASK(MSR_PR)                             ; privilege mode
                        cmplwi  r3, 0                                                   ; Check for preemption
                        bne             .L_no_int_ast                                   ; Do not preempt if level is not zero
                        andi.   r6,r12,MASK(MSR_PR)                             ; privilege mode
-                       lwz             r11,PP_NEED_AST(r10)                    ; Get the AST request address
-                       lwz             r11,0(r11)                                              ; Get the request
+                       lwz             r11,PP_PENDING_AST(r10)                 ; Get the pending AST mask
                        beq-    .L_kernel_int_ast                               ; In kernel space, AST_URGENT check
                        li              r3,T_AST                                                ; Assume the worst
                        mr.             r11,r11                                                 ; Are there any pending? 
                        beq-    .L_kernel_int_ast                               ; In kernel space, AST_URGENT check
                        li              r3,T_AST                                                ; Assume the worst
                        mr.             r11,r11                                                 ; Are there any pending? 
@@ -1048,15 +1094,16 @@ chkfac:         lwz             r29,savesrr1+4(r3)                              ; Get the current MSR
                        
                        eieio                                                                   ; Make sure this gets out before owner clear
                        
                        
                        eieio                                                                   ; Make sure this gets out before owner clear
                        
-#if ppSize != 4096
-#error per_proc_info is not 4k in size
+#if ppeSize != 16
+#error per_proc_entry is not 16bytes in size
 #endif
                        
 #endif
                        
-                       lis             r23,hi16(EXT(per_proc_info))    ; Set base per_proc
-                       slwi    r22,r22,12                                              ; FInd offset to the owner per_proc
-                       ori             r23,r23,lo16(EXT(per_proc_info))        ; Set base per_proc
-                       li              r24,FPUowner                                    ; Displacement to FPU owner
-                       add             r22,r23,r22                                             ; Point to the owner per_proc   
+                       lis             r23,hi16(EXT(PerProcTable))             ; Set base PerProcTable
+                       slwi    r22,r22,4                                               ; Find offset to the owner per_proc_entry
+                       ori             r23,r23,lo16(EXT(PerProcTable)) ; Set base PerProcTable
+                       li              r24,FPUowner                                    ; Displacement to float owner
+                       add             r22,r23,r22                                             ; Point to the owner per_proc_entry
+                       lwz             r22,ppe_vaddr(r22)                              ; Point to the owner per_proc
                        
 fpuinvothr:    lwarx   r23,r24,r22                                             ; Get the owner
 
                        
 fpuinvothr:    lwarx   r23,r24,r22                                             ; Get the owner
 
@@ -1131,7 +1178,10 @@ fpuhasdfrd:
                        lwz             r24,FPUsave(r26)                                ; (TEST/DEBUG) Get the first savearea
                        mr.             r23,r23                                                 ; (TEST/DEBUG) Should be level 0
                        beq++   fpulvl0                                                 ; (TEST/DEBUG) Yes...
                        lwz             r24,FPUsave(r26)                                ; (TEST/DEBUG) Get the first savearea
                        mr.             r23,r23                                                 ; (TEST/DEBUG) Should be level 0
                        beq++   fpulvl0                                                 ; (TEST/DEBUG) Yes...
-                       BREAKPOINT_TRAP                                                 ; (TEST/DEBUG)
+
+                       lis             r0,hi16(Choke)                                  ; (TEST/DEBUG) Choke code
+                       ori             r0,r0,lo16(Choke)                               ; (TEST/DEBUG) and the rest
+                       sc                                                                              ; (TEST/DEBUG) System ABEND
                        
 fpulvl0:       mr.             r24,r24                                                 ; (TEST/DEBUG) Any context?
                        beq             fpunusrstt                                              ; (TEST/DEBUG) No...
                        
 fpulvl0:       mr.             r24,r24                                                 ; (TEST/DEBUG) Any context?
                        beq             fpunusrstt                                              ; (TEST/DEBUG) No...
@@ -1139,11 +1189,17 @@ fpulvl0:        mr.             r24,r24                                                 ; (TEST/DEBUG) Any context?
                        lwz             r21,SAVprev+4(r24)                              ; (TEST/DEBUG) Get previous pointer
                        mr.             r23,r23                                                 ; (TEST/DEBUG) Is this our user context?
                        beq++   fpulvl0b                                                ; (TEST/DEBUG) Yes...
                        lwz             r21,SAVprev+4(r24)                              ; (TEST/DEBUG) Get previous pointer
                        mr.             r23,r23                                                 ; (TEST/DEBUG) Is this our user context?
                        beq++   fpulvl0b                                                ; (TEST/DEBUG) Yes...
-                       BREAKPOINT_TRAP                                                 ; (TEST/DEBUG)
+
+                       lis             r0,hi16(Choke)                                  ; (TEST/DEBUG) Choke code
+                       ori             r0,r0,lo16(Choke)                               ; (TEST/DEBUG) and the rest
+                       sc                                                                              ; (TEST/DEBUG) System ABEND
                        
 fpulvl0b:      mr.             r21,r21                                                 ; (TEST/DEBUG) Is there a forward chain?
                        beq++   fpunusrstt                                              ; (TEST/DEBUG) Nope...
                        
 fpulvl0b:      mr.             r21,r21                                                 ; (TEST/DEBUG) Is there a forward chain?
                        beq++   fpunusrstt                                              ; (TEST/DEBUG) Nope...
-                       BREAKPOINT_TRAP                                                 ; (TEST/DEBUG)
+
+                       lis             r0,hi16(Choke)                                  ; (TEST/DEBUG) Choke code
+                       ori             r0,r0,lo16(Choke)                               ; (TEST/DEBUG) and the rest
+                       sc                                                                              ; (TEST/DEBUG) System ABEND
                                                
 fpunusrstt:                                                                                    ; (TEST/DEBUG)
 #endif                         
                                                
 fpunusrstt:                                                                                    ; (TEST/DEBUG)
 #endif                         
@@ -1163,6 +1219,7 @@ fpunusrstt:                                                                                       ; (TEST/DEBUG)
                        beq++   fpuena                                                  ; Nope...
                        lwz             r25,SAVlevel(r24)                               ; Get the level of savearea
                        lwz             r0,SAVprev+4(r24)                               ; Get the previous
                        beq++   fpuena                                                  ; Nope...
                        lwz             r25,SAVlevel(r24)                               ; Get the level of savearea
                        lwz             r0,SAVprev+4(r24)                               ; Get the previous
+
                        cmplw   r30,r25                                                 ; Is savearea for the level we are launching?
                        bne++   fpuena                                                  ; No, just go enable...
                        
                        cmplw   r30,r25                                                 ; Is savearea for the level we are launching?
                        bne++   fpuena                                                  ; No, just go enable...
                        
@@ -1207,11 +1264,12 @@ chkvec:
                        
                        eieio                                                                   ; Make sure this gets out before owner clear
                        
                        
                        eieio                                                                   ; Make sure this gets out before owner clear
                        
-                       lis             r23,hi16(EXT(per_proc_info))    ; Set base per_proc
-                       slwi    r22,r22,12                                              ; Find offset to the owner per_proc                     
-                       ori             r23,r23,lo16(EXT(per_proc_info))        ; Set base per_proc
-                       li              r24,VMXowner                                    ; Displacement to VMX owner
-                       add             r22,r23,r22                                             ; Point to the owner per_proc   
+                       lis             r23,hi16(EXT(PerProcTable))             ; Set base PerProcTable
+                       slwi    r22,r22,4                                               ; Find offset to the owner per_proc_entry
+                       ori             r23,r23,lo16(EXT(PerProcTable)) ; Set base PerProcTable
+                       li              r24,VMXowner                                    ; Displacement to float owner
+                       add             r22,r23,r22                                             ; Point to the owner per_proc_entry
+                       lwz             r22,ppe_vaddr(r22)                              ; Point to the owner per_proc
                        
 vmxinvothr:    lwarx   r23,r24,r22                                             ; Get the owner
 
                        
 vmxinvothr:    lwarx   r23,r24,r22                                             ; Get the owner
 
@@ -1255,7 +1313,7 @@ vmxonlyone:       stw             r24,VMXsave(r20)                                ; Dequeue this savearea
                        lwz             r3,SACvrswap+4(r3)                              ; Get the virtual to real conversion (bottom)
                        stw             r8,SAVprev(r22)                                 ; Link the old in (top)                                 
                        stw             r9,SAVprev+4(r22)                               ; Link the old in (bottom)                                      
                        lwz             r3,SACvrswap+4(r3)                              ; Get the virtual to real conversion (bottom)
                        stw             r8,SAVprev(r22)                                 ; Link the old in (top)                                 
                        stw             r9,SAVprev+4(r22)                               ; Link the old in (bottom)                                      
-                       xor             r3,r24,r3                                               ; Convert to physical
+                       xor             r3,r22,r3                                               ; Convert to physical
                        stw             r2,quickfret(r31)                               ; Set the first in quickfret list (top)                                 
                        stw             r3,quickfret+4(r31)                             ; Set the first in quickfret list (bottom)                                      
 
                        stw             r2,quickfret(r31)                               ; Set the first in quickfret list (top)                                 
                        stw             r3,quickfret+4(r31)                             ; Set the first in quickfret list (bottom)                                      
 
@@ -1313,7 +1371,7 @@ vmxchkena:        lwz             r21,VMXowner(r31)                               ; Get the ID of the live context
                        
 vmxena:                oris    r29,r29,hi16(MASK(MSR_VEC))             ; Enable facility
 
                        
 vmxena:                oris    r29,r29,hi16(MASK(MSR_VEC))             ; Enable facility
 
-setena:                lwz             r18,cioSpace(r28)                               ; Get the space ID in case we are launching user
+setena:                lwz             r18,umwSpace(r28)                               ; Get the space ID in case we are launching user
                        rlwinm. r0,r29,0,MSR_PR_BIT,MSR_PR_BIT  ; Are we about to launch user state?
                        li              r0,0                                                    ; Get set to release quickfret holdoff
                        crmove  cr7_eq,cr0_eq                                   ; Remember if we are going to user state
                        rlwinm. r0,r29,0,MSR_PR_BIT,MSR_PR_BIT  ; Are we about to launch user state?
                        li              r0,0                                                    ; Get set to release quickfret holdoff
                        crmove  cr7_eq,cr0_eq                                   ; Remember if we are going to user state
@@ -1322,7 +1380,7 @@ setena:           lwz             r18,cioSpace(r28)                               ; Get the space ID in case we are launching u
                        rlwinm  r20,r29,(((31-vectorCngbit)+(MSR_VEC_BIT+1))&31),vectorCngbit,vectorCngbit      ; Set flag if we enabled vector
                        stw             r29,savesrr1+4(r27)                             ; Turn facility on or off
                        stw             r0,holdQFret(r31)                               ; Release quickfret
                        rlwinm  r20,r29,(((31-vectorCngbit)+(MSR_VEC_BIT+1))&31),vectorCngbit,vectorCngbit      ; Set flag if we enabled vector
                        stw             r29,savesrr1+4(r27)                             ; Turn facility on or off
                        stw             r0,holdQFret(r31)                               ; Release quickfret
-                       oris    r18,r18,hi16(cioSwitchAway)             ; Set the switch-away bit in case we go to user
+                       oris    r18,r18,hi16(umwSwitchAway)             ; Set the switch-away bit in case we go to user
 
                        beq             setenaa                                                 ; Neither float nor vector turned on....
                        
 
                        beq             setenaa                                                 ; Neither float nor vector turned on....
                        
@@ -1365,12 +1423,16 @@ segtb:          mftbu   r20                                                             ; Get the upper time base
                        
                        mtdec   r13                                                             ; Set our value
 
                        
                        mtdec   r13                                                             ; Set our value
 
-chkifuser:     beq--   cr7,chkenax                                             ; Skip this if we are going to kernel...
-                       stw             r18,cioSpace(r28)                               ; Half-invalidate to force MapUserAddressSpace to reload SRs
+chkifuser:     addi    r4,r28,SYSTEM_TIMER
+                       mftb    r3
+                       beq--   cr7,chkifuser1                                  ; Skip this if we are going to kernel...
+                       stw             r18,umwSpace(r28)                               ; Half-invalidate to force MapUserAddressWindow to reload SRs
+                       addi    r4,r28,USER_TIMER
+
+chkifuser1:    bl              EXT(timer_event)
 
 chkenax:       
 
 
 chkenax:       
 
-       
 #if DEBUG
                        lwz             r20,SAVact(r27)                                 ; (TEST/DEBUG) Make sure our restore
                        mfsprg  r21, 1                                                  ; (TEST/DEBUG) with the current act.
 #if DEBUG
                        lwz             r20,SAVact(r27)                                 ; (TEST/DEBUG) Make sure our restore
                        mfsprg  r21, 1                                                  ; (TEST/DEBUG) with the current act.
@@ -1448,20 +1510,24 @@ fastpath:       cmplwi  cr3,r0,0x7FF5                           ; Is this a null fastpath?
 /*
  * void cthread_set_self(cproc_t p)
  *
 /*
  * void cthread_set_self(cproc_t p)
  *
- * set's thread state "user_value"
+ * Set's thread state "user_value".  In practice this is the thread-local-data-pointer (TLDP),
+ * though we do not interpret it.  This call is mostly used by 32-bit tasks, but we save all 64 bits
+ * in case a 64-bit task wants to use this facility.  They normally do not, because the 64-bit
+ * ABI reserves r13 for the TLDP.
  *
  * This op is invoked as follows:
  *     li r0, CthreadSetSelfNumber     // load the fast-trap number
  *     sc                              // invoke fast-trap
  *     blr
  *
  * This op is invoked as follows:
  *     li r0, CthreadSetSelfNumber     // load the fast-trap number
  *     sc                              // invoke fast-trap
  *     blr
- *
  */
 
 CthreadSetSelfNumber:
  */
 
 CthreadSetSelfNumber:
-
-                       lwz             r5,saver3+4(r4)                         /* Retrieve the self number */
-                       stw             r5,CTHREAD_SELF(r13)            /* Remember it */
-                       stw             r5,UAW(r25)                                     /* Prime the per_proc_info with it */
+            lwz     r3,saver3+0(r4)             /* get the TLDP passed in r3 */
+                       lwz             r5,saver3+4(r4)                         /* (all 64 bits, in case this is a 64-bit task) */
+                       stw             r3,CTHREAD_SELF+0(r13)          /* Remember it in the activation... */
+                       stw             r5,CTHREAD_SELF+4(r13)
+                       stw             r3,UAW+0(r25)               /* ...and in the per-proc */
+                       stw             r5,UAW+4(r25)
 
 
                        .globl  EXT(fastexit)
 
 
                        .globl  EXT(fastexit)
@@ -1514,13 +1580,14 @@ exitFromVM:     mr              r30,r4                                          ; Get the savearea
                        .globl  EXT(retFromVM)
 
 LEXT(retFromVM)
                        .globl  EXT(retFromVM)
 
 LEXT(retFromVM)
-                       mfsprg  r10,0                                           ; Restore the per_proc info
+                       mfsprg  r10,1                                           ; Get the current activation
+                       lwz             r10,ACT_PER_PROC(r10)           ; Get the per_proc block 
                        mr              r8,r3                                           ; Get the activation
                        lwz             r4,SAVprev+4(r30)                       ; Pick up the previous savearea
                        mr              r3,r30                                          ; Put savearea in proper register for common code
                        lwz             r11,SAVflags(r30)                       ; Get the flags of the current savearea
                        rlwinm  r11,r11,0,15,13                         ; Clear the syscall flag 
                        mr              r8,r3                                           ; Get the activation
                        lwz             r4,SAVprev+4(r30)                       ; Pick up the previous savearea
                        mr              r3,r30                                          ; Put savearea in proper register for common code
                        lwz             r11,SAVflags(r30)                       ; Get the flags of the current savearea
                        rlwinm  r11,r11,0,15,13                         ; Clear the syscall flag 
-                       lwz             r1,ACT_THREAD(r8)                       ; and the active thread
+                       mr              r1,r8
                        stw             r11,SAVflags(r3)                        ; Save back the flags (with reset stack cleared)
 
                        stw             r4,ACT_MACT_PCB(r8)                     ; Point to the previous savearea (or 0 if none)
                        stw             r11,SAVflags(r3)                        ; Save back the flags (with reset stack cleared)
 
                        stw             r4,ACT_MACT_PCB(r8)                     ; Point to the previous savearea (or 0 if none)
@@ -1553,7 +1620,8 @@ LEXT(retFromVM)
 LEXT(chandler)                                                                 ; Choke handler
 
                        li              r31,0                                           ; Get a 0
 LEXT(chandler)                                                                 ; Choke handler
 
                        li              r31,0                                           ; Get a 0
-                       mfsprg  r25,0                                           ; Get the per_proc 
+                       mfsprg  r25,1                                           ; Get the current activation
+                       lwz             r25,ACT_PER_PROC(r25)           ; Get the per_proc block 
                        stw             r31,traceMask(0)                        ; Force tracing off right now
                
                
                        stw             r31,traceMask(0)                        ; Force tracing off right now
                
                
@@ -1603,7 +1671,8 @@ versave:
                        lwz             r23,0(r22)                                              ; (TEST/DEBUG)
                        mr.             r23,r23                                                 ; (TEST/DEBUG)
                        beqlr-                                                                  ; (TEST/DEBUG)
                        lwz             r23,0(r22)                                              ; (TEST/DEBUG)
                        mr.             r23,r23                                                 ; (TEST/DEBUG)
                        beqlr-                                                                  ; (TEST/DEBUG)
-                       mfsprg  r20,0                                                   ; (TEST/DEBUG)
+                       mfsprg  r20,1                                                   ; Get the current activation
+                       lwz             r20,ACT_PER_PROC(r20)                   ; Get the per_proc block 
                        lwz             r21,pfAvailable(r20)                    ; (TEST/DEBUG)
                        mr.             r21,r21                                                 ; (TEST/DEBUG)
                        bnelr+                                                                  ; (TEST/DEBUG)
                        lwz             r21,pfAvailable(r20)                    ; (TEST/DEBUG)
                        mr.             r21,r21                                                 ; (TEST/DEBUG)
                        bnelr+                                                                  ; (TEST/DEBUG)
mirror of XNU