]> git.saurik.com Git - apple/xnu.git/blobdiff - bsd/sys/timex.h
xnu-4570.1.46.tar.gz
[apple/xnu.git] / bsd / sys / timex.h
diff --git a/bsd/sys/timex.h b/bsd/sys/timex.h
new file mode 100644 (file)
index 0000000..5e8a3bf
--- /dev/null
@@ -0,0 +1,212 @@
+/*-
+ ***********************************************************************
+ *                                                                    *
+ * Copyright (c) David L. Mills 1993-2001                             *
+ * Copyright (c) Poul-Henning Kamp 2000-2001                           *
+ *                                                                    *
+ * Permission to use, copy, modify, and distribute this software and   *
+ * its documentation for any purpose and without fee is hereby        *
+ * granted, provided that the above copyright notice appears in all    *
+ * copies and that both the copyright notice and this permission       *
+ * notice appear in supporting documentation, and that the name        *
+ * University of Delaware not be used in advertising or publicity      *
+ * pertaining to distribution of the software without specific,               *
+ * written prior permission. The University of Delaware makes no       *
+ * representations about the suitability this software for any        *
+ * purpose. It is provided "as is" without express or implied         *
+ * warranty.                                                          *
+ *                                                                    *
+ ***********************************************************************
+ *
+ * $FreeBSD$
+ *
+ * This header file defines the Network Time Protocol (NTP) interfaces
+ * for user and daemon application programs.
+ *
+ * This file was originally created 17 Sep 93 by David L. Mills, Professor
+ * of University of Delaware, building on work which had already been ongoing
+ * for a decade and a half at that point in time.
+ *
+ * In 2000 the APIs got a upgrade from microseconds to nanoseconds,
+ * a joint work between Poul-Henning Kamp and David L. Mills.
+ *
+ */
+
+/*
+ * Copyright (c) 2017 Apple Computer, Inc. All rights reserved.
+ *
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
+ *
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ *
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ *
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
+ */
+
+#ifndef _SYS_TIMEX_H_
+#define _SYS_TIMEX_H_ 1
+
+#include <sys/time.h>
+
+#define NTP_API                4               /* NTP API version */
+
+/*
+ * The following defines establish the performance envelope of the
+ * kernel discipline loop. Phase or frequency errors greater than
+ * NAXPHASE or MAXFREQ are clamped to these maxima. For update intervals
+ * less than MINSEC, the loop always operates in PLL mode; while, for
+ * update intervals greater than MAXSEC, the loop always operates in FLL
+ * mode. Between these two limits the operating mode is selected by the
+ * STA_FLL bit in the status word.
+ */
+
+#define MAXPHASE        500000000L      /* max phase error (ns) */
+#define MAXFREQ         500000L         /* max freq error (ns/s) */
+#define MINSEC          256             /* min FLL update interval (s) */
+#define MAXSEC          2048            /* max PLL update interval (s) */
+#define NANOSECOND      1000000000L     /* nanoseconds in one second */
+#define SCALE_PPM       (65536 / 1000)  /* crude ns/s to scaled PPM */
+#define MAXTC           10              /* max time constant */
+
+/* Codes for PPS (pulse-per-second) signals or leap seconds are not used but kept
+ * unchanged and commented for future compatibility.
+ */
+
+/*
+ * Control mode codes (timex.modes)
+ */
+#define MOD_OFFSET      0x0001          /* set time offset */
+#define MOD_FREQUENCY   0x0002          /* set frequency offset */
+#define MOD_MAXERROR    0x0004          /* set maximum time error */
+#define MOD_ESTERROR    0x0008          /* set estimated time error */
+#define MOD_STATUS      0x0010          /* set clock status bits */
+#define MOD_TIMECONST   0x0020          /* set PLL time constant */
+#define MOD_PPSMAX      0x0040          /* set PPS maximum averaging time */
+#define MOD_TAI         0x0080          /* set TAI offset */
+#define        MOD_MICRO       0x1000          /* select microsecond resolution */
+#define        MOD_NANO        0x2000          /* select nanosecond resolution */
+#define MOD_CLKB        0x4000          /* select clock B */
+#define MOD_CLKA        0x8000          /* select clock A */
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL         0x0001          /* enable PLL updates (rw) */
+#define STA_PPSFREQ     0x0002          /* enable PPS freq discipline (rw) */
+#define STA_PPSTIME     0x0004          /* enable PPS time discipline (rw) */
+#define STA_FLL         0x0008          /* enable FLL mode (rw) */
+#define STA_INS         0x0010          /* insert leap (rw) */
+#define STA_DEL         0x0020          /* delete leap (rw) */
+#define STA_UNSYNC      0x0040          /* clock unsynchronized (rw) */
+#define STA_FREQHOLD    0x0080          /* hold frequency (rw) */
+#define STA_PPSSIGNAL   0x0100          /* PPS signal present (ro) */
+#define STA_PPSJITTER   0x0200          /* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER   0x0400          /* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR    0x0800          /* PPS signal calibration error (ro) */
+#define STA_CLOCKERR    0x1000          /* clock hardware fault (ro) */
+#define STA_NANO        0x2000          /* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE        0x4000          /* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK         0x8000          /* clock source (0 = A, 1 = B) (ro) */
+
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+    STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+#define STA_SUPPORTED (STA_PLL | STA_FLL | STA_UNSYNC | STA_FREQHOLD | \
+    STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+/*
+ * Clock states (ntptimeval.time_state)
+ */
+#define TIME_OK         0               /* no leap second warning */
+#define TIME_INS        1               /* insert leap second warning */
+#define TIME_DEL        2               /* delete leap second warning */
+#define TIME_OOP        3               /* leap second in progress */
+#define TIME_WAIT       4               /* leap second has occurred */
+#define TIME_ERROR      5               /* error (see status word) */
+
+/*
+ * NTP user interface -- ntp_gettime - used to read kernel clock values
+ */
+struct ntptimeval {
+       struct timespec time;           /* current time (ns) (ro) */
+       long maxerror;                  /* maximum error (us) (ro) */
+       long esterror;                  /* estimated error (us) (ro) */
+       long tai;                       /* TAI offset */
+       int time_state;                 /* time status */
+};
+
+/*
+ * NTP daemon interface -- ntp_adjtime -- used to discipline CPU clock
+ * oscillator and control/determine status.
+ *
+ * Note: The offset, precision and jitter members are in microseconds if
+ * STA_NANO is zero and nanoseconds if not.
+ */
+struct timex {
+       unsigned int modes;             /* clock mode bits (wo) */
+       long    offset;                 /* time offset (ns/us) (rw) */
+       long    freq;                   /* frequency offset (scaled PPM) (rw) */
+       long    maxerror;               /* maximum error (us) (rw) */
+       long    esterror;               /* estimated error (us) (rw) */
+       int     status;                 /* clock status bits (rw) */
+       long    constant;               /* poll interval (log2 s) (rw) */
+       long    precision;              /* clock precision (ns/us) (ro) */
+       long    tolerance;              /* clock frequency tolerance (scaled
+                                        * PPM) (ro) */
+       /*
+        * The following read-only structure members are used by
+        * the PPS signal discipline that is currently not supported.
+        * They are included for compatibility.
+        */
+       long    ppsfreq;                /* PPS frequency (scaled PPM) (ro) */
+       long    jitter;                 /* PPS jitter (ns/us) (ro) */
+       int     shift;                  /* interval duration (s) (shift) (ro) */
+       long    stabil;                 /* PPS stability (scaled PPM) (ro) */
+       long    jitcnt;                 /* jitter limit exceeded (ro) */
+       long    calcnt;                 /* calibration intervals (ro) */
+       long    errcnt;                 /* calibration errors (ro) */
+       long    stbcnt;                 /* stability limit exceeded (ro) */
+};
+
+#ifdef KERNEL
+#ifdef XNU_KERNEL_PRIVATE
+#include <sys/_types/_user32_timex.h>
+#include <sys/_types/_user64_timex.h>
+#include <sys/_types/_user32_ntptimeval.h>
+#include <sys/_types/_user64_ntptimeval.h>
+#include <kern/clock.h>
+
+int64_t ntp_get_freq(void);
+void   ntp_update_second(int64_t *adjustment, clock_sec_t secs);
+void   ntp_init(void);
+#endif
+#else /* !_KERNEL */
+#include <sys/cdefs.h>
+
+__BEGIN_DECLS
+#if !defined(_POSIX_C_SOURCE) || defined(_DARWIN_C_SOURCE)
+int    ntp_adjtime(struct timex *);
+int    ntp_gettime(struct ntptimeval *);
+#endif /* (!_POSIX_C_SOURCE || _DARWIN_C_SOURCE) */
+__END_DECLS
+#endif /* KERNEL */
+
+
+#endif /* !_SYS_TIMEX_H_ */