/*
- * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
+ * Copyright (c) 2000-2004 Apple Computer, Inc. All rights reserved.
*
- * @APPLE_LICENSE_HEADER_START@
- *
- * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved.
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
* This file contains Original Code and/or Modifications of Original Code
* as defined in and that are subject to the Apple Public Source License
* Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
+ *
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
*
* The Original Code and all software distributed under the License are
* distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* Please see the License for the specific language governing rights and
* limitations under the License.
*
- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
/*
* @OSF_COPYRIGHT@
#include <ppc/asm.h>
#include <ppc/proc_reg.h>
-#include <cpus.h>
#include <assym.s>
#include <debug.h>
#include <mach/ppc/vm_param.h>
#include <ppc/savearea.h>
#define FPVECDBG 0
-#define GDDBG 0
.text
/*
- * void load_context(thread_t thread)
+ * void machine_load_context(thread_t thread)
*
- * Load the context for the first kernel thread, and go.
- *
- * NOTE - if DEBUG is set, the former routine is a piece
- * of C capable of printing out debug info before calling the latter,
- * otherwise both entry points are identical.
+ * Load the context for the first thread to run on a
+ * cpu, and go.
*/
.align 5
- .globl EXT(load_context)
-
-LEXT(load_context)
+ .globl EXT(machine_load_context)
- .globl EXT(Load_context)
-
-LEXT(Load_context)
-
-/*
- * Since this is the first thread, we came in on the interrupt
- * stack. The first thread never returns, so there is no need to
- e worry about saving its frame, hence we can reset the istackptr
- * back to the saved_state structure at it's top
- */
-
-
-/*
- * get new thread pointer and set it into the active_threads pointer
- *
- */
-
- mfsprg r6,0
+LEXT(machine_load_context)
+ mfsprg r6,1 ; Get the current activation
+ lwz r6,ACT_PER_PROC(r6) ; Get the per_proc block
lwz r0,PP_INTSTACK_TOP_SS(r6)
stw r0,PP_ISTACKPTR(r6)
- stw r3,PP_ACTIVE_THREAD(r6)
-
-/* Find the new stack and store it in active_stacks */
-
- lwz r12,PP_ACTIVE_STACKS(r6)
- lwz r1,THREAD_KERNEL_STACK(r3)
- lwz r9,THREAD_TOP_ACT(r3) /* Point to the active activation */
- mtsprg 1,r9
- stw r1,0(r12)
+ mr r9,r3 /* Set up the current thread */
+ mtsprg 1,r9
li r0,0 /* Clear a register */
- lwz r8,ACT_MACT_PCB(r9) /* Get the savearea used */
- rlwinm r7,r8,0,0,19 /* Switch to savearea base */
- lwz r11,SAVprev(r8) /* Get the previous savearea */
+ lwz r3,ACT_MACT_PCB(r9) /* Get the savearea used */
mfmsr r5 /* Since we are passing control, get our MSR values */
- lwz r1,saver1(r8) /* Load new stack pointer */
- stw r0,saver3(r8) /* Make sure we pass in a 0 for the continuation */
- lwz r7,SACvrswap(r7) /* Get the translation from virtual to real */
+ lwz r11,SAVprev+4(r3) /* Get the previous savearea */
+ lwz r1,saver1+4(r3) /* Load new stack pointer */
+ lwz r10,ACT_MACT_SPF(r9) /* Get the special flags */
+ stw r0,saver3+4(r3) /* Make sure we pass in a 0 for the continuation */
stw r0,FM_BACKPTR(r1) /* zero backptr */
- stw r5,savesrr1(r8) /* Pass our MSR to the new guy */
- xor r3,r7,r8 /* Get the physical address of the new context save area */
+ stw r5,savesrr1+4(r3) /* Pass our MSR to the new guy */
stw r11,ACT_MACT_PCB(r9) /* Unstack our savearea */
- b EXT(exception_exit) /* Go end it all... */
+ oris r10,r10,hi16(OnProc) /* Set OnProc bit */
+ stw r0,ACT_PREEMPT_CNT(r9) /* Enable preemption */
+ stw r10,ACT_MACT_SPF(r9) /* Update the special flags */
+ stw r10,spcFlags(r6) /* Set per_proc copy of the special flags */
+ b EXT(exception_exit) /* Go for it */
-/* struct thread_shuttle *Switch_context(struct thread_shuttle *old,
- * void (*cont)(void),
- * struct thread_shuttle *new)
+/* thread_t Switch_context(thread_t old,
+ * void (*cont)(void),
+ * thread_t new)
*
* Switch from one thread to another. If a continuation is supplied, then
* we do not need to save callee save registers.
*
*/
-/* void Call_continuation( void (*continuation)(void), vm_offset_t stack_ptr)
+/* void Call_continuation( void (*continuation)(void), void *param, wait_result_t wresult, vm_offset_t stack_ptr)
*/
.align 5
.globl EXT(Call_continuation)
LEXT(Call_continuation)
-
- mtlr r3
- mr r1, r4 /* Load new stack pointer */
- blr /* Jump to the continuation */
+ mtlr r3 /* continuation */
+ mr r3,r4 /* parameter */
+ mr r4,r5 /* wait result */
+ mr r1,r6 /* Load new stack pointer */
+ blrl /* Jump to the continuation */
+ mfsprg r3,1
+ b EXT(thread_terminate)
/*
* Get the old kernel stack, and store into the thread structure.
* See if a continuation is supplied, and skip state save if so.
- * NB. Continuations are no longer used, so this test is omitted,
- * as should the second argument, but it is in generic code.
- * We always save state. This does not hurt even if continuations
- * are put back in.
+ *
+ * Note that interrupts must be disabled before we get here (i.e., splsched)
*/
-/* Context switches are double jumps. We pass the following to the
+/*
+ * Switch_context(old, continuation, new)
+ *
+ * Context switches are double jumps. We pass the following to the
* context switch firmware call:
*
- * R3 = switchee's savearea
+ * R3 = switchee's savearea, virtual if continuation, low order physical for full switch
* R4 = old thread
* R5 = new SRR0
* R6 = new SRR1
+ * R7 = high order physical address of savearea for full switch
*
* savesrr0 is set to go to switch_in
* savesrr1 is set to uninterruptible with translation on
LEXT(Switch_context)
- mfsprg r12,0 ; Get the per_proc block
- lwz r10,PP_ACTIVE_STACKS(r12) ; Get the pointer to the current stack
+ lwz r12,ACT_PER_PROC(r3) ; Get the per_proc block
#if DEBUG
- lwz r11,PP_ISTACKPTR(r12) ; (DEBUG/TRACE) make sure we are not
- mr. r11,r11 ; (DEBUG/TRACE) on the interrupt
- bne+ notonintstack ; (DEBUG/TRACE) stack
+ lwz r0,PP_ISTACKPTR(r12) ; (DEBUG/TRACE) make sure we are not
+ mr. r0,r0 ; (DEBUG/TRACE) on the interrupt
+ bne++ notonintstack ; (DEBUG/TRACE) stack
BREAKPOINT_TRAP
notonintstack:
#endif
- stw r4,THREAD_CONTINUATION(r3) ; Set continuation into the thread
- cmpwi cr1,r4,0 ; used waaaay down below
- lwz r7,0(r10) ; Get the current stack
-/*
- * Make the new thread the current thread.
- */
-
- stw r7,THREAD_KERNEL_STACK(r3) ; Remember the current stack in the thread (do not need???)
- stw r5, PP_ACTIVE_THREAD(r12) ; Make the new thread current
-
- lwz r11,THREAD_KERNEL_STACK(r5) ; Get the new stack pointer
-
- lwz r5,THREAD_TOP_ACT(r5) ; Get the new activation
- mtsprg 1,r5
- lwz r7,CTHREAD_SELF(r5) ; Pick up the user assist word
lwz r8,ACT_MACT_PCB(r5) ; Get the PCB for the new guy
-
-#if 0
- lwz r0,SAVflags(r8) ; (TEST/DEBUG)
- rlwinm r0,r0,24,24,31 ; (TEST/DEBUG)
- cmplwi r0,SAVempty ; (TEST/DEBUG)
- bne+ nnnn ; (TEST/DEBUG)
- b . ; (TEST/DEBUG)
-nnnn: ; (TEST/DEBUG)
-#endif
-
- stw r11,0(r10) ; Save the new kernel stack address
- stw r7,UAW(r12) ; Save the assist word for the "ultra fast path"
-
+ lwz r9,umwSpace(r5) ; Get user memory window address space
+ cmpwi cr1,r4,0 ; Remeber if there is a continuation - used waaaay down below
+ lwz r0,CTHREAD_SELF+0(r5) ; Pick up the user assist "word" (actually a double)
+ lwz r7,CTHREAD_SELF+4(r5) ; both halves
lwz r11,ACT_MACT_BTE(r5) ; Get BlueBox Task Environment
-
+ lwz r6,umwRelo(r5) ; Get user memory window relocation top
+ stw r12,ACT_PER_PROC(r5) ; Set per_proc in new activation
+ mtsprg 1,r5
+ lwz r2,umwRelo+4(r5) ; Get user memory window relocation bottom
+
+ stw r0,UAW+0(r12) ; Save the assist word for the "ultra fast path"
+ stw r7,UAW+4(r12)
+
lwz r7,ACT_MACT_SPF(r5) ; Get the special flags
- lwz r10,ACT_KLOADED(r5)
+ sth r9,ppUMWmp+mpSpace(r12) ; Save the space
+ stw r6,ppUMWmp+mpNestReloc(r12) ; Save top part of physical address
+ stw r2,ppUMWmp+mpNestReloc+4(r12) ; Save bottom part of physical address
stw r11,ppbbTaskEnv(r12) ; Save the bb task env
- li r0,0
- cmpwi cr0,r10,0
- lwz r10,PP_ACTIVE_KLOADED(r12)
+ lwz r2,traceMask(0) ; Get the enabled traces
stw r7,spcFlags(r12) ; Set per_proc copy of the special flags
- beq cr0,.L_sw_ctx_not_kld
-
- stw r5,0(r10)
- b .L_sw_ctx_cont
-
-.L_sw_ctx_not_kld:
- stw r0,0(r10) /* act_kloaded = 0 */
-
-.L_sw_ctx_cont:
- lis r10,hi16(EXT(trcWork)) ; Get top of trace mask
- rlwinm r7,r8,0,0,19 /* Switch to savearea base */
- ori r10,r10,lo16(EXT(trcWork)) ; Get bottom of mask
- lwz r11,SAVprev(r8) /* Get the previous of the switchee's savearea */
- lwz r10,traceMask(r10) ; Get the enabled traces
lis r0,hi16(CutTrace) ; Trace FW call
- mr. r10,r10 ; Any tracing going on?
+ mr. r2,r2 ; Any tracing going on?
+ lwz r11,SAVprev+4(r8) ; Get the previous of the switchee savearea
ori r0,r0,lo16(CutTrace) ; Trace FW call
- beq+ cswNoTrc ; No trace today, dude...
- mr r10,r3 ; Save across trace
- lwz r2,THREAD_TOP_ACT(r3) ; Trace old activation
- mr r3,r11 ; Trace prev savearea
- sc ; Cut trace entry of context switch
- mr r3,r10 ; Restore
-
-cswNoTrc: mfmsr r6 /* Get the MSR because the switched to thread should inherit it */
- lwz r7,SACvrswap(r7) /* Get the translation from virtual to real */
- stw r11,ACT_MACT_PCB(r5) /* Dequeue the savearea we're switching to */
+ beq++ cswNoTrc ; No trace today, dude...
- rlwinm r6,r6,0,MSR_FP_BIT+1,MSR_FP_BIT-1 /* Turn off the FP */
- lwz r2,curctx(r5) ; Grab our current context pointer
- rlwinm r6,r6,0,MSR_VEC_BIT+1,MSR_VEC_BIT-1 /* Turn off the vector */
- mr r4,r3 /* Save our old thread to pass back */
+ li r2,0x4400 ; Trace ID
+ mr r6,r11 ; Trace prev savearea
+ sc ; Cut trace entry of context switch
- lhz r0,PP_CPU_NUMBER(r12) ; Get our CPU number
+cswNoTrc: lwz r2,curctx(r5) ; Grab our current context pointer
lwz r10,FPUowner(r12) ; Grab the owner of the FPU
lwz r9,VMXowner(r12) ; Grab the owner of the vector
+ mfmsr r6 ; Get the MSR because the switched to thread should inherit it
+ stw r11,ACT_MACT_PCB(r5) ; Dequeue the savearea we are switching to
+ li r0,1 ; Get set to hold off quickfret
+
+ rlwinm r6,r6,0,MSR_FP_BIT+1,MSR_FP_BIT-1 ; Turn off the FP
cmplw r10,r2 ; Do we have the live float context?
lwz r10,FPUlevel(r2) ; Get the live level
+ mr r4,r3 ; Save our old thread to pass back
cmplw cr5,r9,r2 ; Do we have the live vector context?
- bne+ cswnofloat ; Float is not ours...
+ rlwinm r6,r6,0,MSR_VEC_BIT+1,MSR_VEC_BIT-1 ; Turn off the vector
+ stw r0,holdQFret(r12) ; Make sure we hold off releasing quickfret
+ bne++ cswnofloat ; Float is not ours...
cmplw r10,r11 ; Is the level the same?
+ lhz r0,PP_CPU_NUMBER(r12) ; Get our CPU number
lwz r5,FPUcpu(r2) ; Get the owning cpu
- bne+ cswnofloat ; Level not the same, this is not live...
+ bne++ cswnofloat ; Level not the same, this is not live...
cmplw r5,r0 ; Still owned by this cpu?
- lwz r10,FPUsave(r2) ; Get the level
- bne+ cswnofloat ; CPU claimed by someone else...
+ lwz r10,FPUsave(r2) ; Get the pointer to next saved context
+ bne++ cswnofloat ; CPU claimed by someone else...
mr. r10,r10 ; Is there a savearea here?
ori r6,r6,lo16(MASK(MSR_FP)) ; Enable floating point
- beq- cswnofloat ; No savearea to check...
+ beq-- cswnofloat ; No savearea to check...
lwz r3,SAVlevel(r10) ; Get the level
- lwz r5,SAVprev(r10) ; Get the previous of this savearea
+ lwz r5,SAVprev+4(r10) ; Get the previous of this savearea
cmplw r3,r11 ; Is it for the current level?
- bne+ cswnofloat ; Nope...
+ bne++ cswnofloat ; Nope...
stw r5,FPUsave(r2) ; Pop off this savearea
- rlwinm r5,r10,0,0,19 ; Move back to start of page
- lwz r5,SACvrswap(r5) ; Get the virtual to real conversion
- la r9,quickfret(r12) ; Point to the quickfret chain header
- xor r5,r10,r5 ; Convert savearea address to real
+
+ rlwinm r3,r10,0,0,19 ; Move back to start of page
+
+ lwz r5,quickfret(r12) ; Get the first in quickfret list (top)
+ lwz r9,quickfret+4(r12) ; Get the first in quickfret list (bottom)
+ lwz r7,SACvrswap(r3) ; Get the virtual to real conversion (top)
+ lwz r3,SACvrswap+4(r3) ; Get the virtual to real conversion (bottom)
+ stw r5,SAVprev(r10) ; Link the old in (top)
+ stw r9,SAVprev+4(r10) ; Link the old in (bottom)
+ xor r3,r10,r3 ; Convert to physical
+ stw r7,quickfret(r12) ; Set the first in quickfret list (top)
+ stw r3,quickfret+4(r12) ; Set the first in quickfret list (bottom)
#if FPVECDBG
lis r0,hi16(CutTrace) ; (TEST/DEBUG)
+ mr r7,r2 ; (TEST/DEBUG)
li r2,0x4401 ; (TEST/DEBUG)
oris r0,r0,lo16(CutTrace) ; (TEST/DEBUG)
sc ; (TEST/DEBUG)
lhz r0,PP_CPU_NUMBER(r12) ; (TEST/DEBUG)
+ mr r2,r7 ; (TEST/DEBUG)
#endif
-;
-; Note: we need to do the atomic operation here because, even though
-; it is impossible with the current implementation, that we may take a
-; PTE miss between the load of the quickfret anchor and the subsequent
-; store. The interrupt handler will dequeue everything on the list and
-; we could end up using stale data. I do not like doing this...
-;
-
-cswfpudq: lwarx r3,0,r9 ; Pick up the old chain head
- stw r3,SAVprev(r10) ; Move it to the current guy
- stwcx. r5,0,r9 ; Save it
- bne- cswfpudq ; Someone chaged the list...
-
-cswnofloat: bne+ cr5,cswnovect ; Vector is not ours...
+cswnofloat: bne++ cr5,cswnovect ; Vector is not ours...
lwz r10,VMXlevel(r2) ; Get the live level
cmplw r10,r11 ; Is the level the same?
+ lhz r0,PP_CPU_NUMBER(r12) ; Get our CPU number
lwz r5,VMXcpu(r2) ; Get the owning cpu
- bne+ cswnovect ; Level not the same, this is not live...
+ bne++ cswnovect ; Level not the same, this is not live...
cmplw r5,r0 ; Still owned by this cpu?
lwz r10,VMXsave(r2) ; Get the level
- bne+ cswnovect ; CPU claimed by someone else...
+ bne++ cswnovect ; CPU claimed by someone else...
mr. r10,r10 ; Is there a savearea here?
oris r6,r6,hi16(MASK(MSR_VEC)) ; Enable vector
- beq- cswnovect ; No savearea to check...
+ beq-- cswnovect ; No savearea to check...
lwz r3,SAVlevel(r10) ; Get the level
- lwz r5,SAVprev(r10) ; Get the previous of this savearea
+ lwz r5,SAVprev+4(r10) ; Get the previous of this savearea
cmplw r3,r11 ; Is it for the current level?
- bne+ cswnovect ; Nope...
+ bne++ cswnovect ; Nope...
stw r5,VMXsave(r2) ; Pop off this savearea
- rlwinm r5,r10,0,0,19 ; Move back to start of page
- lwz r5,SACvrswap(r5) ; Get the virtual to real conversion
- la r9,quickfret(r12) ; Point to the quickfret chain header
- xor r5,r10,r5 ; Convert savearea address to real
+ rlwinm r3,r10,0,0,19 ; Move back to start of page
+
+ lwz r5,quickfret(r12) ; Get the first in quickfret list (top)
+ lwz r9,quickfret+4(r12) ; Get the first in quickfret list (bottom)
+ lwz r2,SACvrswap(r3) ; Get the virtual to real conversion (top)
+ lwz r3,SACvrswap+4(r3) ; Get the virtual to real conversion (bottom)
+ stw r5,SAVprev(r10) ; Link the old in (top)
+ stw r9,SAVprev+4(r10) ; Link the old in (bottom)
+ xor r3,r10,r3 ; Convert to physical
+ stw r2,quickfret(r12) ; Set the first in quickfret list (top)
+ stw r3,quickfret+4(r12) ; Set the first in quickfret list (bottom)
#if FPVECDBG
lis r0,hi16(CutTrace) ; (TEST/DEBUG)
sc ; (TEST/DEBUG)
#endif
+cswnovect: li r0,0 ; Get set to release quickfret holdoff
+ rlwinm r11,r8,0,0,19 ; Switch to savearea base
+ lis r9,hi16(EXT(switch_in)) ; Get top of switch in routine
+ lwz r5,savesrr0+4(r8) ; Set up the new SRR0
;
-; Note: we need to do the atomic operation here because, even though
-; it is impossible with the current implementation, that we may take a
-; PTE miss between the load of the quickfret anchor and the subsequent
-; store. The interrupt handler will dequeue everything on the list and
-; we could end up using stale data. I do not like doing this...
+; Note that the low-level code requires the R7 contain the high order half of the savearea's
+; physical address. This is hack city, but it is the way it is.
;
+ lwz r7,SACvrswap(r11) ; Get the high order V to R translation
+ lwz r11,SACvrswap+4(r11) ; Get the low order V to R translation
+ ori r9,r9,lo16(EXT(switch_in)) ; Bottom half of switch in
+ stw r0,holdQFret(r12) ; Make sure we release quickfret holdoff
+ stw r9,savesrr0+4(r8) ; Make us jump to the switch in routine
-cswvecdq: lwarx r3,0,r9 ; Pick up the old chain head
- stw r3,SAVprev(r10) ; Move it to the current guy
- stwcx. r5,0,r9 ; Save it
- bne- cswvecdq ; Someone chaged the list...
-
-cswnovect: lis r9,hi16(EXT(switch_in)) /* Get top of switch in routine */
- lwz r5,savesrr0(r8) /* Set up the new SRR0 */
- ori r9,r9,lo16(EXT(switch_in)) /* Bottom half of switch in */
- lis r0,hi16(SwitchContextCall) /* Top part of switch context */
- stw r9,savesrr0(r8) /* Make us jump to the switch in routine */
-
- li r10,MSR_SUPERVISOR_INT_OFF /* Get the switcher's MSR */
lwz r9,SAVflags(r8) /* Get the flags */
- stw r10,savesrr1(r8) /* Set up for switch in */
- rlwinm r9,r9,0,15,13 /* Reset the syscall flag */
+ lis r0,hi16(SwitchContextCall) /* Top part of switch context */
+ li r10,(MASK(MSR_ME)|MASK(MSR_DR)) /* Get the switcher's MSR */
ori r0,r0,lo16(SwitchContextCall) /* Bottom part of switch context */
- xor r3,r7,r8 /* Get the physical address of the new context save area */
+ stw r10,savesrr1+4(r8) /* Set up for switch in */
+ rlwinm r9,r9,0,15,13 /* Reset the syscall flag */
+ xor r3,r11,r8 /* Get the physical address of the new context save area */
stw r9,SAVflags(r8) /* Set the flags */
bne cr1,swtchtocont ; Switch to the continuation
swtchtocont:
- stw r5,savesrr0(r8) ; Set the pc
- stw r6,savesrr1(r8) ; Set the next MSR to use
- stw r4,saver3(r8) ; Make sure we pass back the old thread
+
+ stw r5,savesrr0+4(r8) ; Set the pc
+ stw r6,savesrr1+4(r8) ; Set the next MSR to use
+ stw r4,saver3+4(r8) ; Make sure we pass back the old thread
+ mr r3,r8 ; Pass in the virtual address of savearea
b EXT(exception_exit) ; Blocking on continuation, toss old context...
* with translation on. If we could, this should be done in lowmem_vectors
* before translation is turned on. But we can't, dang it!
*
- * R3 = switcher's savearea
+ * switch_in() runs with DR on and IR off
+ *
+ * R3 = switcher's savearea (32-bit virtual)
* saver4 = old thread in switcher's save
* saver5 = new SRR0 in switcher's save
* saver6 = new SRR1 in switcher's save
.globl EXT(switch_in)
LEXT(switch_in)
-
- lwz r4,saver4(r3) /* Get the old thread */
- lwz r9,THREAD_TOP_ACT(r4) /* Get the switched from ACT */
- lwz r5,saver5(r3) /* Get the srr0 value */
- lwz r10,ACT_MACT_PCB(r9) /* Get the top PCB on the old thread */
- lwz r6,saver6(r3) /* Get the srr1 value */
- stw r3,ACT_MACT_PCB(r9) /* Put the new one on top */
- stw r10,SAVprev(r3) /* Chain on the old one */
+ lwz r4,saver4+4(r3) ; Get the old thread
+ lwz r5,saver5+4(r3) ; Get the srr0 value
+
+ mfsprg r0,2 ; Get feature flags
+ mr r9,r4 ; Get the switched from ACT
+ lwz r6,saver6+4(r3) ; Get the srr1 value
+ rlwinm. r0,r0,0,pf64Bitb,pf64Bitb ; Check for 64-bit
+ lwz r10,ACT_MACT_PCB(r9) ; Get the top PCB on the old thread
- mr r3,r4 /* Pass back the old thread */
+ stw r3,ACT_MACT_PCB(r9) ; Put the new one on top
+ stw r10,SAVprev+4(r3) ; Chain on the old one
- mtsrr0 r5 /* Set return point */
- mtsrr1 r6 /* Set return MSR */
- rfi /* Jam... */
- .long 0
- .long 0
- .long 0
- .long 0
- .long 0
- .long 0
- .long 0
- .long 0
+ mr r3,r4 ; Pass back the old thread
+ mtsrr0 r5 ; Set return point
+ mtsrr1 r6 ; Set return MSR
+
+ bne++ siSixtyFour ; Go do 64-bit...
+ rfi ; Jam...
+
+siSixtyFour:
+ rfid ; Jam...
/*
* void fpu_save(facility_context ctx)
LEXT(fpu_save)
+ lis r2,hi16(MASK(MSR_VEC)) ; Get the vector enable
+ li r12,lo16(MASK(MSR_EE)) ; Get the EE bit
+ ori r2,r2,lo16(MASK(MSR_FP)) ; Get FP
mfmsr r0 ; Get the MSR
- rlwinm r0,r0,0,MSR_VEC_BIT+1,MSR_VEC_BIT-1 ; Force vectors off
- rlwinm r2,r0,0,MSR_EE_BIT+1,MSR_EE_BIT-1 ; But do interrupts only for now
+ andc r0,r0,r2 ; Clear FP, VEC
+ andc r2,r0,r12 ; Clear EE
ori r2,r2,MASK(MSR_FP) ; Enable the floating point feature for now also
- rlwinm r0,r0,0,MSR_FP_BIT+1,MSR_FP_BIT-1 ; Force floating point off
mtmsr r2 ; Set the MSR
isync
- mfsprg r6,0 ; Get the per_processor block
+ mfsprg r6,1 ; Get the current activation
+ lwz r6,ACT_PER_PROC(r6) ; Get the per_proc block
lwz r12,FPUowner(r6) ; Get the context ID for owner
#if FPVECDBG
mr. r3,r12 ; (TEST/DEBUG)
li r2,0x6F00 ; (TEST/DEBUG)
li r5,0 ; (TEST/DEBUG)
- beq- noowneryet ; (TEST/DEBUG)
+ beq-- noowneryet ; (TEST/DEBUG)
lwz r4,FPUlevel(r12) ; (TEST/DEBUG)
lwz r5,FPUsave(r12) ; (TEST/DEBUG)
#endif
mflr r2 ; Save the return address
-fsretry: mr. r12,r12 ; Anyone own the FPU?
+ cmplw r3,r12 ; Is the specified context live?
lhz r11,PP_CPU_NUMBER(r6) ; Get our CPU number
- beq- fsret ; Nobody owns the FPU, no save required...
-
- cmplw cr1,r3,r12 ; Is the specified context live?
+ lwz r9,FPUcpu(r3) ; Get the cpu that context was last on
+ bne-- fsret ; Nobody owns the FPU, no save required...
- isync ; Force owner check first
-
- lwz r9,FPUcpu(r12) ; Get the cpu that context was last on
- bne- cr1,fsret ; No, it is not...
-
- cmplw cr1,r9,r11 ; Was the context for this processor?
- beq- cr1,fsgoodcpu ; Facility last used on this processor...
+ cmplw r9,r11 ; Was the context for this processor?
+ la r5,FPUsync(r3) ; Point to the sync word
+ bne-- fsret ; Facility not last used on this processor...
+
+;
+; It looks like we need to save this one.
+;
+; First, make sure that the live context block is not mucked with while
+; we are trying to save it on out. Then we will give it the final check.
+;
- b fsret ; Someone else claimed it...
+ lis r9,ha16(EXT(LockTimeOut)) ; Get the high part
+ mftb r8 ; Get the time now
+ lwz r9,lo16(EXT(LockTimeOut))(r9) ; Get the timeout value
+ b fssync0a ; Jump to the lock...
.align 5
-fsgoodcpu: lwz r3,FPUsave(r12) ; Get the current FPU savearea for the thread
+fssync0: li r7,lgKillResv ; Get killing field
+ stwcx. r7,0,r7 ; Kill reservation
+
+fssync0a: lwz r7,0(r5) ; Sniff the lock
+ mftb r10 ; Is it time yet?
+ cmplwi cr1,r7,0 ; Is it locked?
+ sub r10,r10,r8 ; How long have we been spinning?
+ cmplw r10,r9 ; Has it been too long?
+ bgt-- fstimeout ; Way too long, panic...
+ bne-- cr1,fssync0a ; Yea, still locked so sniff harder...
+
+fssync1: lwarx r7,0,r5 ; Get the sync word
+ li r12,1 ; Get the lock
+ mr. r7,r7 ; Is it unlocked?
+ bne-- fssync0
+ stwcx. r12,0,r5 ; Store lock and test reservation
+ bne-- fssync1 ; Try again if lost reservation...
+
+ isync ; Toss speculation
+
+ lwz r12,FPUowner(r6) ; Get the context ID for owner
+ cmplw r3,r12 ; Check again if we own the FPU?
+ bne-- fsretlk ; Go unlock and return since we no longer own context
+
+ lwz r5,FPUcpu(r12) ; Get the cpu that context was last on
+ lwz r7,FPUsave(r12) ; Get the current FPU savearea for the thread
+ cmplw r5,r11 ; Is this for the same processor?
lwz r9,FPUlevel(r12) ; Get our current level indicator
+ bne-- fsretlk ; Not the same processor, skip any save...
- cmplwi cr1,r3,0 ; Have we ever saved this facility context?
- beq- cr1,fsneedone ; Never saved it, so go do it...
+ cmplwi r7,0 ; Have we ever saved this facility context?
+ beq-- fsneedone ; Never saved it, so go do it...
- lwz r8,SAVlevel(r3) ; Get the level this savearea is for
- cmplw cr1,r9,r8 ; Correct level?
- beq- cr1,fsret ; The current level is already saved, bail out...
+ lwz r8,SAVlevel(r7) ; Get the level of this savearea
+ cmplw r9,r8 ; Correct level?
+ beq-- fsretlk ; The current level is already saved, bail out...
fsneedone: bl EXT(save_get) ; Get a savearea for the context
- mfsprg r6,0 ; Get back per_processor block
+ mfsprg r6,1 ; Get the current activation
+ lwz r6,ACT_PER_PROC(r6) ; Get the per_proc block
li r4,SAVfloat ; Get floating point tag
lwz r12,FPUowner(r6) ; Get back our thread
stb r4,SAVflags+2(r3) ; Mark this savearea as a float
- mr. r12,r12 ; See if we were disowned while away. Very, very small chance of it...
- beq- fsbackout ; If disowned, just toss savearea...
lwz r4,facAct(r12) ; Get the activation associated with live context
- mtlr r2 ; Restore return
lwz r8,FPUsave(r12) ; Get the current top floating point savearea
stw r4,SAVact(r3) ; Indicate the right activation for this context
lwz r9,FPUlevel(r12) ; Get our current level indicator again
stw r3,FPUsave(r12) ; Set this as the most current floating point context
- stw r8,SAVprev(r3) ; And then chain this in front
+ stw r8,SAVprev+4(r3) ; And then chain this in front
stw r9,SAVlevel(r3) ; Show level in savearea
-;
-; Save the current FPU state into the PCB of the thread that owns it.
-;
-
- la r11,savefp0(r3) ; Point to the 1st line
- dcbz 0,r11 ; Allocate the first savearea line
-
- la r11,savefp4(r3) ; Point to the 2nd line
- stfd f0,savefp0(r3)
- dcbz 0,r11 ; Allocate it
- stfd f1,savefp1(r3)
- stfd f2,savefp2(r3)
- la r11,savefp8(r3) ; Point to the 3rd line
- stfd f3,savefp3(r3)
- dcbz 0,r11 ; Allocate it
- stfd f4,savefp4(r3)
- stfd f5,savefp5(r3)
- stfd f6,savefp6(r3)
- la r11,savefp12(r3) ; Point to the 4th line
- stfd f7,savefp7(r3)
- dcbz 0,r11 ; Allocate it
- stfd f8,savefp8(r3)
- stfd f9,savefp9(r3)
- stfd f10,savefp10(r3)
- la r11,savefp16(r3) ; Point to the 5th line
- stfd f11,savefp11(r3)
- dcbz 0,r11 ; Allocate it
- stfd f12,savefp12(r3)
- stfd f13,savefp13(r3)
- stfd f14,savefp14(r3)
- la r11,savefp20(r3) ; Point to the 6th line
- stfd f15,savefp15(r3)
- stfd f16,savefp16(r3)
- stfd f17,savefp17(r3)
- stfd f18,savefp18(r3)
- la r11,savefp24(r3) ; Point to the 7th line
- stfd f19,savefp19(r3)
- dcbz 0,r11 ; Allocate it
- stfd f20,savefp20(r3)
- stfd f21,savefp21(r3)
- stfd f22,savefp22(r3)
- la r11,savefp28(r3) ; Point to the 8th line
- stfd f23,savefp23(r3)
- dcbz 0,r11 ; Allocate it
- stfd f24,savefp24(r3)
- stfd f25,savefp25(r3)
- stfd f26,savefp26(r3)
- stfd f27,savefp27(r3)
- stfd f28,savefp28(r3)
-
- stfd f29,savefp29(r3)
- stfd f30,savefp30(r3)
- stfd f31,savefp31(r3)
+ bl fp_store ; save all 32 FPRs in the save area at r3
+ mtlr r2 ; Restore return
+
+fsretlk: li r7,0 ; Get the unlock value
+ eieio ; Make sure that these updates make it out
+ stw r7,FPUsync(r12) ; Unlock it
fsret: mtmsr r0 ; Put interrupts on if they were and floating point off
isync
blr
-fsbackout: mr r12,r0 ; Save the original MSR
- b EXT(save_ret_join) ; Toss savearea and return from there...
+fstimeout: mr r4,r5 ; Set the lock address
+ mr r5,r7 ; Set the lock word data
+ lis r3,hi16(fstimeout_str) ; Get the failed lck message
+ ori r3,r3,lo16(fstimeout_str) ; Get the failed lck message
+ bl EXT(panic)
+ BREAKPOINT_TRAP ; We die here anyway
+
+ .data
+fstimeout_str:
+ STRINGD "fpu_save: timeout on sync lock (0x%08X), value = 0x%08X\n\000"
+ .text
+
/*
* fpu_switch()
stw r1,0(r3)
#endif /* DEBUG */
- mfsprg r26,0 ; Get the per_processor block
- mfmsr r19 ; Get the current MSR
+ mfsprg r17,1 ; Get the current activation
+ lwz r26,ACT_PER_PROC(r17) ; Get the per_proc block
+ mfmsr r19 ; Get the current MSR
mr r25,r4 ; Save the entry savearea
lwz r22,FPUowner(r26) ; Get the thread that owns the FPU
- lwz r10,PP_ACTIVE_THREAD(r26) ; Get the pointer to the active thread
ori r19,r19,lo16(MASK(MSR_FP)) ; Enable the floating point feature
- lwz r17,THREAD_TOP_ACT(r10) ; Now get the activation that is running
mtmsr r19 ; Enable floating point instructions
isync
lhz r16,PP_CPU_NUMBER(r26) ; Get the current CPU number
-fswretry: mr. r22,r22 ; See if there is any live FP status
-
- beq- fsnosave ; No live context, so nothing to save...
+ mr. r22,r22 ; See if there is any live FP status
+ la r15,FPUsync(r22) ; Point to the sync word
- isync ; Make sure we see this in the right order
+ beq-- fsnosave ; No live context, so nothing to save...
- lwz r30,FPUsave(r22) ; Get the top savearea
- cmplw cr2,r22,r29 ; Are both old and new the same context?
lwz r18,FPUcpu(r22) ; Get the last CPU we ran on
- cmplwi cr1,r30,0 ; Anything saved yet?
+ cmplw cr2,r22,r29 ; Are both old and new the same context?
+ lwz r30,FPUsave(r22) ; Get the top savearea
cmplw r18,r16 ; Make sure we are on the right processor
lwz r31,FPUlevel(r22) ; Get the context level
+ cmplwi cr1,r30,0 ; Anything saved yet?
- bne- fsnosave ; No, not on the same processor...
+ bne-- fsnosave ; No, not on the same processor...
;
; Check to see if the live context has already been saved.
cmplw r31,r27 ; See if the current and active levels are the same
crand cr0_eq,cr2_eq,cr0_eq ; Remember if both the levels and contexts are the same
- li r3,0 ; Clear this
- beq- fsthesame ; New and old are the same, just go enable...
+ beq-- fsthesame ; New and old are the same, just go enable...
+
+
+;
+; Note it turns out that on a G5, the following load has about a 50-50 chance of
+; taking a segment exception in a system that is doing heavy file I/O. We
+; make a dummy access right now in order to get that resolved before we take the lock.
+; We do not use the data returned because it may change over the lock
+;
- beq- cr1,fsmstsave ; Not saved yet, go do it...
+ beq-- cr1,fswsync ; Nothing saved, skip the probe attempt...
+ lwz r11,SAVlevel(r30) ; Touch the context in order to fault in the segment
+;
+; Make sure that the live context block is not mucked with while
+; we are trying to save it on out
+;
+
+fswsync: lis r11,ha16(EXT(LockTimeOut)) ; Get the high part
+ mftb r3 ; Get the time now
+ lwz r11,lo16(EXT(LockTimeOut))(r11) ; Get the timeout value
+ b fswsync0a ; Jump to the lock...
+
+ .align 5
+
+fswsync0: li r19,lgKillResv ; Get killing field
+ stwcx. r19,0,r19 ; Kill reservation
+
+fswsync0a: lwz r19,0(r15) ; Sniff the lock
+ mftb r18 ; Is it time yet?
+ cmplwi cr1,r19,0 ; Is it locked?
+ sub r18,r18,r3 ; How long have we been spinning?
+ cmplw r18,r11 ; Has it been too long?
+ bgt-- fswtimeout ; Way too long, panic...
+ bne-- cr1,fswsync0a ; Yea, still locked so sniff harder...
+
+fswsync1: lwarx r19,0,r15 ; Get the sync word
+ li r0,1 ; Get the lock
+ mr. r19,r19 ; Is it unlocked?
+ bne-- fswsync0
+ stwcx. r0,0,r15 ; Store lock and test reservation
+ bne-- fswsync1 ; Try again if lost reservation...
+
+ isync ; Toss speculation
+
+;
+; Note that now that we have the lock, we need to check if anything changed.
+; Also note that the possible changes are limited. The context owner can
+; never change to a different thread or level although it can be invalidated.
+; A new context can not be pushed on top of us, but it can be popped. The
+; cpu indicator will always change if another processor mucked with any
+; contexts.
+;
+; It should be very rare that any of the context stuff changes across the lock.
+;
+
+ lwz r0,FPUowner(r26) ; Get the thread that owns the FPU again
+ lwz r11,FPUsave(r22) ; Get the top savearea again
+ lwz r18,FPUcpu(r22) ; Get the last CPU we ran on again
+ sub r0,r0,r22 ; Non-zero if we lost ownership, 0 if not
+ xor r11,r11,r30 ; Non-zero if saved context changed, 0 if not
+ xor r18,r18,r16 ; Non-zero if cpu changed, 0 if not
+ cmplwi cr1,r30,0 ; Is anything saved?
+ or r0,r0,r11 ; Zero only if both owner and context are unchanged
+ or. r0,r0,r18 ; Zero only if nothing has changed
+ li r3,0 ; Clear this
+
+ bne-- fsnosavelk ; Something has changed, so this is not ours to save...
+ beq-- cr1,fsmstsave ; There is no context saved yet...
+
lwz r11,SAVlevel(r30) ; Get the level of top saved context
cmplw r31,r11 ; Are live and saved the same?
#if FPVECDBG
lis r0,hi16(CutTrace) ; (TEST/DEBUG)
li r2,0x7F02 ; (TEST/DEBUG)
- mr r3,r30 ; (TEST/DEBUG)
+ mr r3,r11 ; (TEST/DEBUG)
mr r5,r31 ; (TEST/DEBUG)
oris r0,r0,lo16(CutTrace) ; (TEST/DEBUG)
sc ; (TEST/DEBUG)
+ li r3,0 ; (TEST/DEBUG)
#endif
- beq+ fsnosave ; Same level, so already saved...
-
+ beq++ fsnosavelk ; Same level, so already saved...
fsmstsave: stw r3,FPUowner(r26) ; Kill the context now
eieio ; Make sure everyone sees it
bl EXT(save_get) ; Go get a savearea
-
- la r11,savefp0(r3) ; Point to the 1st line in new savearea
+
lwz r12,facAct(r22) ; Get the activation associated with the context
- dcbz 0,r11 ; Allocate cache
- stw r3,FPUsave(r22) ; Set this as the latest context savearea for the thread
-
- stw r30,SAVprev(r3) ; Point us to the old context
+ stw r30,SAVprev+4(r3) ; Point us to the old context
stw r31,SAVlevel(r3) ; Tag our level
li r7,SAVfloat ; Get the floating point ID
stw r12,SAVact(r3) ; Make sure we point to the right guy
stb r7,SAVflags+2(r3) ; Set that we have a floating point save area
-
+ stw r3,FPUsave(r22) ; Set this as the latest context savearea for the thread
+
#if FPVECDBG
lis r0,hi16(CutTrace) ; (TEST/DEBUG)
li r2,0x7F03 ; (TEST/DEBUG)
sc ; (TEST/DEBUG)
#endif
-;
-; Now we will actually save the old context
-;
-
- la r11,savefp4(r3) ; Point to the 2nd line
- stfd f0,savefp0(r3)
- dcbz 0,r11 ; Allocate cache
- stfd f1,savefp1(r3)
- stfd f2,savefp2(r3)
- la r11,savefp8(r3) ; Point to the 3rd line
- stfd f3,savefp3(r3)
- dcbz 0,r11 ; Allocate cache
- stfd f4,savefp4(r3)
- stfd f5,savefp5(r3)
- stfd f6,savefp6(r3)
- la r11,savefp12(r3) ; Point to the 4th line
- stfd f7,savefp7(r3)
- dcbz 0,r11 ; Allocate cache
- stfd f8,savefp8(r3)
- stfd f9,savefp9(r3)
- stfd f10,savefp10(r3)
- la r11,savefp16(r3) ; Point to the 5th line
- stfd f11,savefp11(r3)
- dcbz 0,r11 ; Allocate cache
- stfd f12,savefp12(r3)
- stfd f13,savefp13(r3)
- stfd f14,savefp14(r3)
- la r11,savefp20(r3) ; Point to the 6th line
- stfd f15,savefp15(r3)
- dcbz 0,r11 ; Allocate cache
- stfd f16,savefp16(r3)
- stfd f17,savefp17(r3)
- stfd f18,savefp18(r3)
- la r11,savefp24(r3) ; Point to the 7th line
- stfd f19,savefp19(r3)
- dcbz 0,r11 ; Allocate cache
- stfd f20,savefp20(r3)
+ bl fp_store ; store all 32 FPRs
- stfd f21,savefp21(r3)
- stfd f22,savefp22(r3)
- la r11,savefp28(r3) ; Point to the 8th line
- stfd f23,savefp23(r3)
- dcbz 0,r11 ; allocate it
- stfd f24,savefp24(r3)
- stfd f25,savefp25(r3)
- stfd f26,savefp26(r3)
- stfd f27,savefp27(r3)
- dcbz 0,r11 ; allocate it
- stfd f28,savefp28(r3)
- stfd f29,savefp29(r3)
- stfd f30,savefp30(r3)
- stfd f31,savefp31(r3)
+fsnosavelk: li r7,0 ; Get the unlock value
+ eieio ; Make sure that these updates make it out
+ stw r7,FPUsync(r22) ; Unlock it.
;
; The context is all saved now and the facility is free.
;
-; If we do not we need to fill the registers with junk, because this level has
+; Check if we need to fill the registers with junk, because this level has
; never used them before and some thieving bastard could hack the old values
; of some thread! Just imagine what would happen if they could! Why, nothing
; would be safe! My God! It is terrifying!
;
+; Make sure that the live context block is not mucked with while
+; we are trying to load it up
+;
+
+fsnosave: la r15,FPUsync(r29) ; Point to the sync word
+ lis r11,ha16(EXT(LockTimeOut)) ; Get the high part
+ mftb r3 ; Get the time now
+ lwz r11,lo16(EXT(LockTimeOut))(r11) ; Get the timeout value
+ b fsnsync0a ; Jump to the lock...
+
+ .align 5
+
+fsnsync0: li r19,lgKillResv ; Get killing field
+ stwcx. r19,0,r19 ; Kill reservation
+fsnsync0a: lwz r19,0(r15) ; Sniff the lock
+ mftb r18 ; Is it time yet?
+ cmplwi cr1,r19,0 ; Is it locked?
+ sub r18,r18,r3 ; How long have we been spinning?
+ cmplw r18,r11 ; Has it been too long?
+ bgt-- fsntimeout ; Way too long, panic...
+ bne-- cr1,fsnsync0a ; Yea, still locked so sniff harder...
-fsnosave: lwz r15,ACT_MACT_PCB(r17) ; Get the current level of the "new" one
+fsnsync1: lwarx r19,0,r15 ; Get the sync word
+ li r0,1 ; Get the lock
+ mr. r19,r19 ; Is it unlocked?
+ bne-- fsnsync0 ; Unfortunately, it is locked...
+ stwcx. r0,0,r15 ; Store lock and test reservation
+ bne-- fsnsync1 ; Try again if lost reservation...
+
+ isync ; Toss speculation
+
+ lwz r15,ACT_MACT_PCB(r17) ; Get the current level of the "new" one
lwz r19,FPUcpu(r29) ; Get the last CPU we ran on
lwz r14,FPUsave(r29) ; Point to the top of the "new" context stack
sc ; (TEST/DEBUG)
#endif
- lis r18,hi16(EXT(per_proc_info)) ; Set base per_proc
- mulli r19,r19,ppSize ; Find offset to the owner per_proc
- ori r18,r18,lo16(EXT(per_proc_info)) ; Set base per_proc
+ lis r18,hi16(EXT(PerProcTable)) ; Set base PerProcTable
+ mulli r19,r19,ppeSize ; Find offset to the owner per_proc_entry
+ ori r18,r18,lo16(EXT(PerProcTable)) ; Set base PerProcTable
li r16,FPUowner ; Displacement to float owner
- add r19,r18,r19 ; Point to the owner per_proc
- li r0,0
+ add r19,r18,r19 ; Point to the owner per_proc_entry
+ lwz r19,ppe_vaddr(r19) ; Point to the owner per_proc
fsinvothr: lwarx r18,r16,r19 ; Get the owner
- cmplw r18,r29 ; Does he still have this context?
- bne fsinvoths ; Nope...
- stwcx. r0,r16,r19 ; Try to invalidate it
- bne- fsinvothr ; Try again if there was a collision...
+ sub r0,r18,r29 ; Subtract one from the other
+ sub r11,r29,r18 ; Subtract the other from the one
+ or r11,r11,r0 ; Combine them
+ srawi r11,r11,31 ; Get a 0 if equal or -1 of not
+ and r18,r18,r11 ; Make 0 if same, unchanged if not
+ stwcx. r18,r16,r19 ; Try to invalidate it
+ bne-- fsinvothr ; Try again if there was a collision...
-fsinvoths: cmplwi cr1,r14,0 ; Do we possibly have some context to load?
+ cmplwi cr1,r14,0 ; Do we possibly have some context to load?
la r11,savefp0(r14) ; Point to first line to bring in
stw r15,FPUlevel(r29) ; Set the "new" active level
eieio
stw r29,FPUowner(r26) ; Mark us as having the live context
- beq+ cr1,MakeSureThatNoTerroristsCanHurtUsByGod ; No "new" context to load...
+ beq++ cr1,MakeSureThatNoTerroristsCanHurtUsByGod ; No "new" context to load...
dcbt 0,r11 ; Touch line in
- lwz r3,SAVprev(r14) ; Get the previous context
lwz r0,SAVlevel(r14) ; Get the level of first facility savearea
+ lwz r3,SAVprev+4(r14) ; Get the previous context
cmplw r0,r15 ; Top level correct to load?
- bne- MakeSureThatNoTerroristsCanHurtUsByGod ; No, go initialize...
+ li r7,0 ; Get the unlock value
+ bne-- MakeSureThatNoTerroristsCanHurtUsByGod ; No, go initialize...
stw r3,FPUsave(r29) ; Pop the context (we will toss the savearea later)
sc ; (TEST/DEBUG)
#endif
+ eieio ; Make sure that these updates make it out
+ stw r7,FPUsync(r29) ; Unlock context now that the context save has been removed
+
+// Note this code is used both by 32- and 128-byte processors. This means six extra DCBTs
+// are executed on a 128-byte machine, but that is better than a mispredicted branch.
+
la r11,savefp4(r14) ; Point to next line
dcbt 0,r11 ; Touch line in
lfd f0, savefp0(r14)
mr r3,r14 ; Get the old savearea (we popped it before)
bl EXT(save_ret) ; Toss it
-fsenable: lwz r8,savesrr1(r25) ; Get the msr of the interrupted guy
- rlwinm r5,r25,0,0,19 ; Get the page address of the savearea
+fsenable: lwz r8,savesrr1+4(r25) ; Get the msr of the interrupted guy
ori r8,r8,MASK(MSR_FP) ; Enable the floating point feature
lwz r10,ACT_MACT_SPF(r17) ; Get the act special flags
lwz r11,spcFlags(r26) ; Get per_proc spec flags cause not in sync with act
- lwz r5,SACvrswap(r5) ; Get Virtual to Real translation
oris r10,r10,hi16(floatUsed|floatCng) ; Set that we used floating point
oris r11,r11,hi16(floatUsed|floatCng) ; Set that we used floating point
rlwinm. r0,r8,0,MSR_PR_BIT,MSR_PR_BIT ; See if we are doing this for user state
- stw r8,savesrr1(r25) ; Set the msr of the interrupted guy
- xor r3,r25,r5 ; Get the real address of the savearea
+ stw r8,savesrr1+4(r25) ; Set the msr of the interrupted guy
+ mr r3,r25 ; Pass the virtual addres of savearea
beq- fsnuser ; We are not user state...
stw r10,ACT_MACT_SPF(r17) ; Set the activation copy
stw r11,spcFlags(r26) ; Set per_proc copy
sc ; (TEST/DEBUG)
#endif
lis r5,hi16(EXT(FloatInit)) ; Get top secret floating point init value address
+ li r7,0 ; Get the unlock value
ori r5,r5,lo16(EXT(FloatInit)) ; Slam bottom
+ eieio ; Make sure that these updates make it out
+ stw r7,FPUsync(r29) ; Unlock it now that the context has been removed
+
lfd f0,0(r5) ; Initialize FP0
fmr f1,f0 ; Do them all
fmr f2,f0
;
; We get here when we are switching to the same context at the same level and the context
-; is still live. Essentially, all we are doing is turning on the faility. It may have
+; is still live. Essentially, all we are doing is turning on the facility. It may have
; gotten turned off due to doing a context save for the current level or a context switch
; back to the live guy.
;
.align 5
+
+fsthesamel: li r7,0 ; Get the unlock value
+ eieio ; Make sure that these updates make it out
+ stw r7,FPUsync(r22) ; Unlock it.
+
fsthesame:
#if FPVECDBG
beq- cr1,fsenable ; Not saved yet, nothing to pop, go enable and exit...
lwz r11,SAVlevel(r30) ; Get the level of top saved context
- lwz r14,SAVprev(r30) ; Get the previous savearea
+ lwz r14,SAVprev+4(r30) ; Get the previous savearea
cmplw r11,r31 ; Are live and saved the same?
- bne+ fsenable ; Level not the same, nothing to pop, go enable and exit...
+ bne++ fsenable ; Level not the same, nothing to pop, go enable and exit...
mr r3,r30 ; Get the old savearea (we popped it before)
+ stw r14,FPUsave(r22) ; Pop the savearea from the stack
bl EXT(save_ret) ; Toss it
b fsenable ; Go enable and exit...
+;
+; Note that we need to choke in this code rather than panic because there is no
+; stack.
+;
+
+fswtimeout: lis r0,hi16(Choke) ; Choke code
+ ori r0,r0,lo16(Choke) ; and the rest
+ li r3,failTimeout ; Timeout code
+ sc ; System ABEND
+
+fsntimeout: lis r0,hi16(Choke) ; Choke code
+ ori r0,r0,lo16(Choke) ; and the rest
+ li r3,failTimeout ; Timeout code
+ sc ; System ABEND
+
+vswtimeout0:
+ lis r0,hi16(Choke) ; Choke code
+ ori r0,r0,lo16(Choke) ; and the rest
+ li r3,failTimeout ; Timeout code
+ sc ; System ABEND
+
+vswtimeout1:
+ lis r0,hi16(Choke) ; Choke code
+ ori r0,r0,lo16(Choke) ; and the rest
+ li r3,failTimeout ; Timeout code
+ sc ; System ABEND
;
; This function invalidates any live floating point context for the passed in facility_context.
LEXT(toss_live_fpu)
-
+ lis r0,hi16(MASK(MSR_VEC)) ; Get VEC
mfmsr r9 ; Get the MSR
- rlwinm r0,r9,0,MSR_EE_BIT+1,MSR_EE_BIT-1 ; Clear interuptions
+ ori r0,r0,lo16(MASK(MSR_FP)) ; Add in FP
rlwinm. r8,r9,0,MSR_FP_BIT,MSR_FP_BIT ; Are floats on right now?
- rlwinm r9,r9,0,MSR_VEC_BIT+1,MSR_VEC_BIT-1 ; Make sure vectors are turned off
- rlwinm r9,r9,0,MSR_FP_BIT+1,MSR_FP_BIT-1 ; Make sure floats are turned off
+ andc r9,r9,r0 ; Force off VEC and FP
+ ori r0,r0,lo16(MASK(MSR_EE)) ; Turn off EE
+ andc r0,r9,r0 ; Turn off EE now
mtmsr r0 ; No interruptions
isync
beq+ tlfnotours ; Floats off, can not be live here...
- mfsprg r8,0 ; Get the per proc
+ mfsprg r8,1 ; Get the current activation
+ lwz r8,ACT_PER_PROC(r8) ; Get the per_proc block
;
; Note that at this point, since floats are on, we are the owner
lwz r6,FPUowner(r8) ; Get the thread that owns the floats
li r0,0 ; Clear this just in case we need it
cmplw r6,r3 ; Are we tossing our own context?
- bne- tlfnotours ; Nope...
+ bne-- tlfnotours ; Nope...
- fsub f1,f1,f1 ; Make a 0
+ lfd f1,Zero(0) ; Make a 0
mtfsf 0xFF,f1 ; Clear it
tlfnotours: lwz r11,FPUcpu(r3) ; Get the cpu on which we last loaded context
- lis r12,hi16(EXT(per_proc_info)) ; Set base per_proc
- mulli r11,r11,ppSize ; Find offset to the owner per_proc
- ori r12,r12,lo16(EXT(per_proc_info)) ; Set base per_proc
+ lis r12,hi16(EXT(PerProcTable)) ; Set base PerProcTable
+ mulli r11,r11,ppeSize ; Find offset to the owner per_proc_entry
+ ori r12,r12,lo16(EXT(PerProcTable)) ; Set base PerProcTable
li r10,FPUowner ; Displacement to float owner
- add r11,r12,r11 ; Point to the owner per_proc
- li r0,0 ; Set a 0 to invalidate context
+ add r11,r12,r11 ; Point to the owner per_proc_entry
+ lwz r11,ppe_vaddr(r11) ; Point to the owner per_proc
tlfinvothr: lwarx r12,r10,r11 ; Get the owner
- cmplw r12,r3 ; Does he still have this context?
- bne+ tlfexit ; Nope, leave...
- stwcx. r0,r10,r11 ; Try to invalidate it
- bne- tlfinvothr ; Try again if there was a collision...
-tlfexit: mtmsr r9 ; Restore interruptions
+ sub r0,r12,r3 ; Subtract one from the other
+ sub r8,r3,r12 ; Subtract the other from the one
+ or r8,r8,r0 ; Combine them
+ srawi r8,r8,31 ; Get a 0 if equal or -1 of not
+ and r12,r12,r8 ; Make 0 if same, unchanged if not
+ stwcx. r12,r10,r11 ; Try to invalidate it
+ bne-- tlfinvothr ; Try again if there was a collision...
+
+ mtmsr r9 ; Restore interruptions
isync ; Could be turning off floats here
blr ; Leave...
LEXT(vec_save)
+
+ lis r2,hi16(MASK(MSR_VEC)) ; Get VEC
mfmsr r0 ; Get the MSR
- rlwinm r0,r0,0,MSR_VEC_BIT+1,MSR_VEC_BIT-1 ; Make sure vectors are turned off when we leave
- rlwinm r2,r0,0,MSR_EE_BIT+1,MSR_EE_BIT-1 ; But do interrupts only for now
+ ori r2,r2,lo16(MASK(MSR_FP)) ; Add in FP
+ andc r0,r0,r2 ; Force off VEC and FP
+ ori r2,r2,lo16(MASK(MSR_EE)) ; Clear EE
+ andc r2,r0,r2 ; Clear EE for now
oris r2,r2,hi16(MASK(MSR_VEC)) ; Enable the vector facility for now also
- rlwinm r0,r0,0,MSR_FP_BIT+1,MSR_FP_BIT-1 ; Force off fp
mtmsr r2 ; Set the MSR
isync
- mfsprg r6,0 ; Get the per_processor block
+ mfsprg r6,1 ; Get the current activation
+ lwz r6,ACT_PER_PROC(r6) ; Get the per_proc block
lwz r12,VMXowner(r6) ; Get the context ID for owner
#if FPVECDBG
+ mr r11,r6 ; (TEST/DEBUG)
mr r7,r0 ; (TEST/DEBUG)
li r4,0 ; (TEST/DEBUG)
mr r10,r3 ; (TEST/DEBUG)
mr. r3,r12 ; (TEST/DEBUG)
li r2,0x5F00 ; (TEST/DEBUG)
li r5,0 ; (TEST/DEBUG)
- beq- noowneryeu ; (TEST/DEBUG)
+ lwz r6,liveVRS(r6) ; (TEST/DEBUG)
+ beq-- noowneryeu ; (TEST/DEBUG)
lwz r4,VMXlevel(r12) ; (TEST/DEBUG)
lwz r5,VMXsave(r12) ; (TEST/DEBUG)
sc ; (TEST/DEBUG)
mr r0,r7 ; (TEST/DEBUG)
mr r3,r10 ; (TEST/DEBUG)
+ mr r6,r11 ; (TEST/DEBUG)
#endif
mflr r2 ; Save the return address
-vsretry: mr. r12,r12 ; Anyone own the vector?
+ cmplw r3,r12 ; Is the specified context live?
lhz r11,PP_CPU_NUMBER(r6) ; Get our CPU number
- beq- vsret ; Nobody owns the vector, no save required...
-
- cmplw cr1,r3,r12 ; Is the specified context live?
-
- isync ; Force owner check first
-
+ bne-- vsret ; We do not own the vector, no save required...
lwz r9,VMXcpu(r12) ; Get the cpu that context was last on
- bne- cr1,vsret ; Specified context is not live
- cmplw cr1,r9,r11 ; Was the context for this processor?
- beq+ cr1,vsgoodcpu ; Facility last used on this processor...
+ cmplw r9,r11 ; Was the context for this processor?
+ la r5,VMXsync(r3) ; Point to the sync word
+ bne-- vsret ; Specified context is not live
+
+;
+; It looks like we need to save this one. Or possibly toss a saved one if
+; the VRSAVE is 0.
+;
+; First, make sure that the live context block is not mucked with while
+; we are trying to save it on out. Then we will give it the final check.
+;
- b vsret ; Someone else claimed this...
+ lis r9,ha16(EXT(LockTimeOut)) ; Get the high part
+ mftb r8 ; Get the time now
+ lwz r9,lo16(EXT(LockTimeOut))(r9) ; Get the timeout value
+ b vssync0a ; Jump to the lock...
.align 5
-vsgoodcpu: lwz r3,VMXsave(r12) ; Get the current vector savearea for the thread
+vssync0: li r7,lgKillResv ; Get killing field
+ stwcx. r7,0,r7 ; Kill reservation
+
+vssync0a: lwz r7,0(r5) ; Sniff the lock
+ mftb r10 ; Is it time yet?
+ cmplwi cr1,r7,0 ; Is it locked?
+ sub r10,r10,r8 ; How long have we been spinning?
+ cmplw r10,r9 ; Has it been too long?
+ bgt-- vswtimeout0 ; Way too long, panic...
+ bne-- cr1,vssync0a ; Yea, still locked so sniff harder...
+
+vssync1: lwarx r7,0,r5 ; Get the sync word
+ li r12,1 ; Get the lock
+ mr. r7,r7 ; Is it unlocked?
+ bne-- vssync0 ; No, it is unlocked...
+ stwcx. r12,0,r5 ; Store lock and test reservation
+ bne-- vssync1 ; Try again if lost reservation...
+
+ isync ; Toss speculation
+
+ lwz r12,VMXowner(r6) ; Get the context ID for owner
+ cmplw r3,r12 ; Check again if we own VMX?
lwz r10,liveVRS(r6) ; Get the right VRSave register
- lwz r9,VMXlevel(r12) ; Get our current level indicator
+ bne-- vsretlk ; Go unlock and return since we no longer own context
+ lwz r5,VMXcpu(r12) ; Get the cpu that context was last on
+ lwz r7,VMXsave(r12) ; Get the current vector savearea for the thread
+ cmplwi cr1,r10,0 ; Is VRsave set to 0?
+ cmplw r5,r11 ; Is this for the same processor?
+ lwz r9,VMXlevel(r12) ; Get our current level indicator
+ bne-- vsretlk ; Not the same processor, skip any save...
- cmplwi cr1,r3,0 ; Have we ever saved this facility context?
- beq- cr1,vsneedone ; Never saved it, so we need an area...
+ cmplwi r7,0 ; Have we ever saved this facility context?
+ beq-- vsneedone ; Never saved it, so we need an area...
- lwz r8,SAVlevel(r3) ; Get the level this savearea is for
- mr. r10,r10 ; Is VRsave set to 0?
- cmplw cr1,r9,r8 ; Correct level?
- bne- cr1,vsneedone ; Different level, so we need to save...
+ lwz r8,SAVlevel(r7) ; Get the level this savearea is for
+ cmplw r9,r8 ; Correct level?
+ bne-- vsneedone ; Different level, so we need to save...
- bne+ vsret ; VRsave is non-zero so we need to keep what is saved...
+ bne++ cr1,vsretlk ; VRsave is non-zero so we need to keep what is saved...
- lwz r4,SAVprev(r3) ; Pick up the previous area
- lwz r5,SAVlevel(r4) ; Get the level associated with save
+ lwz r4,SAVprev+4(r7) ; Pick up the previous area
+ li r5,0 ; Assume we just dumped the last
+ mr. r4,r4 ; Is there one?
stw r4,VMXsave(r12) ; Dequeue this savearea
- stw r5,VMXlevel(r12) ; Save the level
-
- li r3,0 ; Clear
- stw r3,VMXowner(r12) ; Show no live context here
+ beq-- vsnomore ; We do not have another...
+
+ lwz r5,SAVlevel(r4) ; Get the level associated with save
+
+vsnomore: stw r5,VMXlevel(r12) ; Save the level
+ li r7,0 ; Clear
+ stw r7,VMXowner(r6) ; Show no live context here
+
+vsbackout: mr r4,r0 ; restore the saved MSR
eieio
+ stw r7,VMXsync(r12) ; Unlock the context
-vsbackout: mr r12,r0 ; Set the saved MSR
- b EXT(save_ret_join) ; Toss the savearea and return from there...
+ b EXT(save_ret_wMSR) ; Toss the savearea and return from there...
.align 5
-vsneedone: mr. r10,r10 ; Is VRsave set to 0?
- beq- vsret ; Yeah, they do not care about any of them...
+vsneedone: beq-- cr1,vsclrlive ; VRSave is zero, go blow away the context...
bl EXT(save_get) ; Get a savearea for the context
- mfsprg r6,0 ; Get back per_processor block
+ mfsprg r6,1 ; Get the current activation
+ lwz r6,ACT_PER_PROC(r6) ; Get the per_proc block
li r4,SAVvector ; Get vector tag
lwz r12,VMXowner(r6) ; Get back our context ID
stb r4,SAVflags+2(r3) ; Mark this savearea as a vector
mr. r12,r12 ; See if we were disowned while away. Very, very small chance of it...
- beq- vsbackout ; If disowned, just toss savearea...
+ li r7,0 ; Clear
+ beq-- vsbackout ; If disowned, just toss savearea...
lwz r4,facAct(r12) ; Get the activation associated with live context
- mtlr r2 ; Restore return
lwz r8,VMXsave(r12) ; Get the current top vector savearea
stw r4,SAVact(r3) ; Indicate the right activation for this context
lwz r9,VMXlevel(r12) ; Get our current level indicator again
stw r3,VMXsave(r12) ; Set this as the most current floating point context
- stw r8,SAVprev(r3) ; And then chain this in front
+ stw r8,SAVprev+4(r3) ; And then chain this in front
stw r9,SAVlevel(r3) ; Set level in savearea
+ mfcr r12 ; save CRs across call to vr_store
+ lwz r10,liveVRS(r6) ; Get the right VRSave register
+
+ bl vr_store ; store live VRs into savearea as required (uses r4-r11)
- mfcr r2 ; Save non-volatile CRs
- lwz r10,liveVRS(r6) ; Get the right VRSave register
- lis r9,0x5555 ; Mask with odd bits set
- rlwinm r11,r10,1,0,31 ; Shift over 1
- ori r9,r9,0x5555 ; Finish mask
- or r4,r10,r11 ; After this, even bits show which lines to zap
-
- andc r11,r4,r9 ; Clear out odd bits
-
- la r6,savevr0(r3) ; Point to line 0
- rlwinm r4,r11,15,0,15 ; Move line 8-15 flags to high order odd bits
- or r4,r11,r4 ; Set the odd bits
- ; (bit 0 is line 0, bit 1 is line 8,
- ; bit 2 is line 1, bit 3 is line 9, etc.
- rlwimi r4,r10,16,16,31 ; Put vrsave 0 - 15 into positions 16 - 31
- la r7,savevr2(r3) ; Point to line 1
- mtcrf 255,r4 ; Load up the CRs
- stw r10,savevrvalid(r3) ; Save the validity information
- mr r8,r6 ; Start registers off
-;
-; Save the current vector state
-;
-
- bf 0,snol0 ; No line 0 to do...
- dcba br0,r6 ; Allocate cache line 0
-
-snol0:
- la r6,savevr4(r3) ; Point to line 2
- bf 2,snol1 ; No line 1 to do...
- dcba br0,r7 ; Allocate cache line 1
-
-snol1:
- la r7,savevr6(r3) ; Point to line 3
- bf 4,snol2 ; No line 2 to do...
- dcba br0,r6 ; Allocate cache line 2
-
-snol2:
- li r11,16 ; Get offset for odd registers
- bf 16,snovr0 ; Do not save VR0...
- stvxl v0,br0,r8 ; Save VR0
-
-snovr0:
- la r9,savevr2(r3) ; Point to V2/V3 pair
- bf 17,snovr1 ; Do not save VR1...
- stvxl v1,r11,r8 ; Save VR1
-
-snovr1:
- la r6,savevr8(r3) ; Point to line 4
- bf 6,snol3 ; No line 3 to do...
- dcba br0,r7 ; Allocate cache line 3
-
-snol3:
- la r8,savevr4(r3) ; Point to V4/V5 pair
- bf 18,snovr2 ; Do not save VR2...
- stvxl v2,br0,r9 ; Save VR2
-
-snovr2:
- bf 19,snovr3 ; Do not save VR3...
- stvxl v3,r11,r9 ; Save VR3
-
-snovr3:
-;
-; Note: CR4 is now free
-;
- la r7,savevr10(r3) ; Point to line 5
- bf 8,snol4 ; No line 4 to do...
- dcba br0,r6 ; Allocate cache line 4
-
-snol4:
- la r9,savevr6(r3) ; Point to R6/R7 pair
- bf 20,snovr4 ; Do not save VR4...
- stvxl v4,br0,r8 ; Save VR4
-
-snovr4:
- bf 21,snovr5 ; Do not save VR5...
- stvxl v5,r11,r8 ; Save VR5
-
-snovr5:
- mtcrf 0x08,r10 ; Set CRs for registers 16-19
- la r6,savevr12(r3) ; Point to line 6
- bf 10,snol5 ; No line 5 to do...
- dcba br0,r7 ; Allocate cache line 5
-
-snol5:
- la r8,savevr8(r3) ; Point to V8/V9 pair
- bf 22,snovr6 ; Do not save VR6...
- stvxl v6,br0,r9 ; Save VR6
-
-snovr6:
- bf 23,snovr7 ; Do not save VR7...
- stvxl v7,r11,r9 ; Save VR7
-
-snovr7:
-;
-; Note: CR5 is now free
-;
- la r7,savevr14(r3) ; Point to line 7
- bf 12,snol6 ; No line 6 to do...
- dcba br0,r6 ; Allocate cache line 6
-
-snol6:
- la r9,savevr10(r3) ; Point to V10/V11 pair
- bf 24,snovr8 ; Do not save VR8...
- stvxl v8,br0,r8 ; Save VR8
-
-snovr8:
- bf 25,snovr9 ; Do not save VR9...
- stvxl v9,r11,r8 ; Save VR9
-
-snovr9:
- mtcrf 0x04,r10 ; Set CRs for registers 20-23
- la r6,savevr16(r3) ; Point to line 8
- bf 14,snol7 ; No line 7 to do...
- dcba br0,r7 ; Allocate cache line 7
-
-snol7:
- la r8,savevr12(r3) ; Point to V12/V13 pair
- bf 26,snovr10 ; Do not save VR10...
- stvxl v10,br0,r9 ; Save VR10
-
-snovr10:
- bf 27,snovr11 ; Do not save VR11...
- stvxl v11,r11,r9 ; Save VR11
-
-snovr11:
-
-;
-; Note: CR6 is now free
-;
- la r7,savevr18(r3) ; Point to line 9
- bf 1,snol8 ; No line 8 to do...
- dcba br0,r6 ; Allocate cache line 8
-
-snol8:
- la r9,savevr14(r3) ; Point to V14/V15 pair
- bf 28,snovr12 ; Do not save VR12...
- stvxl v12,br0,r8 ; Save VR12
-
-snovr12:
- bf 29,snovr13 ; Do not save VR13...
- stvxl v13,r11,r8 ; Save VR13
-
-snovr13:
- mtcrf 0x02,r10 ; Set CRs for registers 24-27
- la r6,savevr20(r3) ; Point to line 10
- bf 3,snol9 ; No line 9 to do...
- dcba br0,r7 ; Allocate cache line 9
-
-snol9:
- la r8,savevr16(r3) ; Point to V16/V17 pair
- bf 30,snovr14 ; Do not save VR14...
- stvxl v14,br0,r9 ; Save VR14
-
-snovr14:
- bf 31,snovr15 ; Do not save VR15...
- stvxl v15,r11,r9 ; Save VR15
-
-snovr15:
-;
-; Note: CR7 is now free
-;
- la r7,savevr22(r3) ; Point to line 11
- bf 5,snol10 ; No line 10 to do...
- dcba br0,r6 ; Allocate cache line 10
-
-snol10:
- la r9,savevr18(r3) ; Point to V18/V19 pair
- bf 16,snovr16 ; Do not save VR16...
- stvxl v16,br0,r8 ; Save VR16
-
-snovr16:
- bf 17,snovr17 ; Do not save VR17...
- stvxl v17,r11,r8 ; Save VR17
-
-snovr17:
- mtcrf 0x01,r10 ; Set CRs for registers 28-31
-;
-; Note: All registers have been or are accounted for in CRs
-;
- la r6,savevr24(r3) ; Point to line 12
- bf 7,snol11 ; No line 11 to do...
- dcba br0,r7 ; Allocate cache line 11
-
-snol11:
- la r8,savevr20(r3) ; Point to V20/V21 pair
- bf 18,snovr18 ; Do not save VR18...
- stvxl v18,br0,r9 ; Save VR18
-
-snovr18:
- bf 19,snovr19 ; Do not save VR19...
- stvxl v19,r11,r9 ; Save VR19
-
-snovr19:
- la r7,savevr26(r3) ; Point to line 13
- bf 9,snol12 ; No line 12 to do...
- dcba br0,r6 ; Allocate cache line 12
-
-snol12:
- la r9,savevr22(r3) ; Point to V22/V23 pair
- bf 20,snovr20 ; Do not save VR20...
- stvxl v20,br0,r8 ; Save VR20
-
-snovr20:
- bf 21,snovr21 ; Do not save VR21...
- stvxl v21,r11,r8 ; Save VR21
-
-snovr21:
- la r6,savevr28(r3) ; Point to line 14
- bf 11,snol13 ; No line 13 to do...
- dcba br0,r7 ; Allocate cache line 13
-
-snol13:
- la r8,savevr24(r3) ; Point to V24/V25 pair
- bf 22,snovr22 ; Do not save VR22...
- stvxl v22,br0,r9 ; Save VR22
-
-snovr22:
- bf 23,snovr23 ; Do not save VR23...
- stvxl v23,r11,r9 ; Save VR23
-
-snovr23:
- la r7,savevr30(r3) ; Point to line 15
- bf 13,snol14 ; No line 14 to do...
- dcba br0,r6 ; Allocate cache line 14
-
-snol14:
- la r9,savevr26(r3) ; Point to V26/V27 pair
- bf 24,snovr24 ; Do not save VR24...
- stvxl v24,br0,r8 ; Save VR24
-
-snovr24:
- bf 25,snovr25 ; Do not save VR25...
- stvxl v25,r11,r8 ; Save VR25
-
-snovr25:
- bf 15,snol15 ; No line 15 to do...
- dcba br0,r7 ; Allocate cache line 15
-
-snol15:
-;
-; Note: All cache lines allocated now
-;
- la r8,savevr28(r3) ; Point to V28/V29 pair
- bf 26,snovr26 ; Do not save VR26...
- stvxl v26,br0,r9 ; Save VR26
-
-snovr26:
- bf 27,snovr27 ; Do not save VR27...
- stvxl v27,r11,r9 ; Save VR27
-
-snovr27:
- la r7,savevr30(r3) ; Point to V30/V31 pair
- bf 28,snovr28 ; Do not save VR28...
- stvxl v28,br0,r8 ; Save VR28
-
-snovr28:
- bf 29,snovr29 ; Do not save VR29...
- stvxl v29,r11,r8 ; Save VR29
-
-snovr29:
- bf 30,snovr30 ; Do not save VR30...
- stvxl v30,br0,r7 ; Save VR30
-
-snovr30:
- bf 31,snovr31 ; Do not save VR31...
- stvxl v31,r11,r7 ; Save VR31
-
-snovr31:
- mtcrf 255,r2 ; Restore all cr
+ mfsprg r6,1 ; Get the current activation
+ mtcrf 255,r12 ; Restore the non-volatile CRs
+ lwz r6,ACT_PER_PROC(r6) ; Get the per_proc block
+ mtlr r2 ; Restore return address
+ lwz r12,VMXowner(r6) ; Get back our context ID
-vsret: mtmsr r0 ; Put interrupts on if they were and vector off
+vsretlk: li r7,0 ; Get the unlock value
+ eieio ; Make sure that these updates make it out
+ stw r7,VMXsync(r12) ; Unlock it
+
+vsret: mtmsr r0 ; Put interrupts on if they were and vector off
isync
blr
+vsclrlive: li r7,0 ; Clear
+ stw r7,VMXowner(r6) ; Show no live context here
+ b vsretlk ; Go unlock and leave...
+
/*
* vec_switch()
*
stw r1,0(r3)
#endif /* DEBUG */
- mfsprg r26,0 ; Get the per_processor block
- mfmsr r19 ; Get the current MSR
+ mfsprg r17,1 ; Get the current activation
+ lwz r26,ACT_PER_PROC(r17) ; Get the per_proc block
+ mfmsr r19 ; Get the current MSR
mr r25,r4 ; Save the entry savearea
- lwz r22,VMXowner(r26) ; Get the thread that owns the vector
- lwz r10,PP_ACTIVE_THREAD(r26) ; Get the pointer to the active thread
oris r19,r19,hi16(MASK(MSR_VEC)) ; Enable the vector feature
- lwz r17,THREAD_TOP_ACT(r10) ; Now get the activation that is running
+ lwz r22,VMXowner(r26) ; Get the thread that owns the vector
mtmsr r19 ; Enable vector instructions
isync
li r2,0x5F01 ; (TEST/DEBUG)
mr r3,r22 ; (TEST/DEBUG)
mr r5,r29 ; (TEST/DEBUG)
+ lwz r6,liveVRS(r26) ; (TEST/DEBUG)
oris r0,r0,LOW_ADDR(CutTrace) ; (TEST/DEBUG)
sc ; (TEST/DEBUG)
#endif
lhz r16,PP_CPU_NUMBER(r26) ; Get the current CPU number
-vsvretry: mr. r22,r22 ; See if there is any live vector status
-
- beq- vsnosave ; No live context, so nothing to save...
+ mr. r22,r22 ; See if there is any live vector status
+ la r15,VMXsync(r22) ; Point to the sync word
- isync ; Make sure we see this in the right order
+ beq-- vswnosave ; No live context, so nothing to save...
- lwz r30,VMXsave(r22) ; Get the top savearea
- cmplw cr2,r22,r29 ; Are both old and new the same context?
lwz r18,VMXcpu(r22) ; Get the last CPU we ran on
+ cmplw cr2,r22,r29 ; Are both old and new the same context?
+ lwz r30,VMXsave(r22) ; Get the top savearea
cmplwi cr1,r30,0 ; Anything saved yet?
- cmplw r18,r16 ; Make sure we are on the right processor
lwz r31,VMXlevel(r22) ; Get the context level
+ cmplw r18,r16 ; Make sure we are on the right processor
lwz r10,liveVRS(r26) ; Get the right VRSave register
- bne- vsnosave ; No, not on the same processor...
+ bne-- vswnosave ; No, not on the same processor...
;
; Check to see if the live context has already been saved.
;
cmplw r31,r27 ; See if the current and active levels are the same
- crand cr0_eq,cr2_eq,cr0_eq ; Remember if both the levels and contexts are the same
- li r8,0 ; Clear this
-
- beq- vsthesame ; New and old are the same, just go enable...
+ crand cr0_eq,cr2_eq,cr0_eq ; Remember if both the levels and contexts are the same
+ beq-- vswthesame ; New and old are the same, just go enable...
+
+;
+; Make sure that the live context block is not mucked with while
+; we are trying to save it on out
+;
+
+ lis r11,ha16(EXT(LockTimeOut)) ; Get the high part
+ mftb r3 ; Get the time now
+ lwz r11,lo16(EXT(LockTimeOut))(r11) ; Get the timeout value
+ b vswsync0a ; Jump to the lock...
+
+ .align 5
+
+vswsync0: li r19,lgKillResv ; Get killing field
+ stwcx. r19,0,r19 ; Kill reservation
+
+vswsync0a: lwz r19,0(r15) ; Sniff the lock
+ mftb r18 ; Is it time yet?
+ cmplwi cr1,r19,0 ; Is it locked?
+ sub r18,r18,r3 ; How long have we been spinning?
+ cmplw r18,r11 ; Has it been too long?
+ bgt-- vswtimeout0 ; Way too long, panic...
+ bne-- cr1,vswsync0a ; Yea, still locked so sniff harder...
+
+vswsync1: lwarx r19,0,r15 ; Get the sync word
+ li r0,1 ; Get the lock
+ mr. r19,r19 ; Is it unlocked?
+ bne-- vswsync0
+ stwcx. r0,0,r15 ; Store lock and test reservation
+ bne-- vswsync1 ; Try again if lost reservation...
+
+ isync ; Toss speculation
+
+;
+; Note that now that we have the lock, we need to check if anything changed.
+; Also note that the possible changes are limited. The context owner can
+; never change to a different thread or level although it can be invalidated.
+; A new context can not be pushed on top of us, but it can be popped. The
+; cpu indicator will always change if another processor mucked with any
+; contexts.
+;
+; It should be very rare that any of the context stuff changes across the lock.
+;
+
+ lwz r0,VMXowner(r26) ; Get the thread that owns the vectors again
+ lwz r11,VMXsave(r22) ; Get the top savearea again
+ lwz r18,VMXcpu(r22) ; Get the last CPU we ran on again
+ sub r0,r0,r22 ; Non-zero if we lost ownership, 0 if not
+ xor r11,r11,r30 ; Non-zero if saved context changed, 0 if not
+ xor r18,r18,r16 ; Non-zero if cpu changed, 0 if not
+ cmplwi cr1,r30,0 ; Is anything saved?
+ or r0,r0,r11 ; Zero only if both owner and context are unchanged
+ or. r0,r0,r18 ; Zero only if nothing has changed
cmplwi cr2,r10,0 ; Check VRSave to see if we really need to save anything...
- beq- cr1,vsmstsave ; Not saved yet, go do it...
+ li r8,0 ; Clear
+
+ bne-- vswnosavelk ; Something has changed, so this is not ours to save...
+ beq-- cr1,vswmstsave ; There is no context saved yet...
lwz r11,SAVlevel(r30) ; Get the level of top saved context
sc ; (TEST/DEBUG)
#endif
- bne- vsmstsave ; Live context has not been saved yet...
-
- bne- cr2,vsnosave ; Live context saved and VRSave not 0, no save and keep context...
+ beq++ vswnosavelk ; Same level, already saved...
+ bne-- cr2,vswnosavelk ; Live context saved and VRSave not 0, no save and keep context...
- lwz r4,SAVprev(r30) ; Pick up the previous area
+ lwz r4,SAVprev+4(r30) ; Pick up the previous area
li r5,0 ; Assume this is the only one (which should be the ususal case)
mr. r4,r4 ; Was this the only one?
stw r4,VMXsave(r22) ; Dequeue this savearea
- beq+ vsonlyone ; This was the only one...
+ beq++ vswonlyone ; This was the only one...
lwz r5,SAVlevel(r4) ; Get the level associated with previous save
-vsonlyone: stw r5,VMXlevel(r22) ; Save the level
+vswonlyone: stw r5,VMXlevel(r22) ; Save the level
stw r8,VMXowner(r26) ; Clear owner
- eieio
+
mr r3,r30 ; Copy the savearea we are tossing
bl EXT(save_ret) ; Toss the savearea
- b vsnosave ; Go load up the context...
+ b vswnosavelk ; Go load up the context...
.align 5
-
-vsmstsave: stw r8,VMXowner(r26) ; Clear owner
- eieio
- beq- cr2,vsnosave ; The VRSave was 0, so there is nothing to save...
+vswmstsave: stw r8,VMXowner(r26) ; Clear owner
+ beq-- cr2,vswnosavelk ; The VRSave was 0, so there is nothing to save...
bl EXT(save_get) ; Go get a savearea
lwz r12,facAct(r22) ; Get the activation associated with the context
stw r3,VMXsave(r22) ; Set this as the latest context savearea for the thread
-
- stw r30,SAVprev(r3) ; Point us to the old context
+ stw r30,SAVprev+4(r3) ; Point us to the old context
stw r31,SAVlevel(r3) ; Tag our level
li r7,SAVvector ; Get the vector ID
stw r12,SAVact(r3) ; Make sure we point to the right guy
#endif
lwz r10,liveVRS(r26) ; Get the right VRSave register
- lis r9,0x5555 ; Mask with odd bits set
- rlwinm r11,r10,1,0,31 ; Shift over 1
- ori r9,r9,0x5555 ; Finish mask
- or r21,r10,r11 ; After this, even bits show which lines to zap
-
- andc r13,r21,r9 ; Clear out odd bits
-
- la r11,savevr0(r3) ; Point to line 0
- rlwinm r24,r13,15,0,15 ; Move line 8-15 flags to high order odd bits
- or r24,r13,r24 ; Set the odd bits
- ; (bit 0 is line 0, bit 1 is line 8,
- ; bit 2 is line 1, bit 3 is line 9, etc.
- rlwimi r24,r10,16,16,31 ; Put vrsave 0 - 15 into positions 16 - 31
- la r21,savevr2(r3) ; Point to line 1
- mtcrf 255,r24 ; Load up the CRs
- stw r10,savevrvalid(r3) ; Save the validity information
- mr r12,r11 ; Start registers off
-;
-; Save the current vector state
-;
-
- bf 0,nol0 ; No line 0 to do...
- dcba br0,r11 ; Allocate cache line 0
-
-nol0:
- la r11,savevr4(r3) ; Point to line 2
- bf 2,nol1 ; No line 1 to do...
- dcba br0,r21 ; Allocate cache line 1
-
-nol1:
- la r21,savevr6(r3) ; Point to line 3
- bf 4,nol2 ; No line 2 to do...
- dcba br0,r11 ; Allocate cache line 2
-
-nol2:
- li r14,16 ; Get offset for odd registers
- bf 16,novr0 ; Do not save VR0...
- stvxl v0,br0,r12 ; Save VR0
-
-novr0:
- la r13,savevr2(r3) ; Point to V2/V3 pair
- bf 17,novr1 ; Do not save VR1...
- stvxl v1,r14,r12 ; Save VR1
-
-novr1:
- la r11,savevr8(r3) ; Point to line 4
- bf 6,nol3 ; No line 3 to do...
- dcba br0,r21 ; Allocate cache line 3
-
-nol3:
- la r12,savevr4(r3) ; Point to V4/V5 pair
- bf 18,novr2 ; Do not save VR2...
- stvxl v2,br0,r13 ; Save VR2
-
-novr2:
- bf 19,novr3 ; Do not save VR3...
- stvxl v3,r14,r13 ; Save VR3
-
-novr3:
-;
-; Note: CR4 is now free
-;
- la r21,savevr10(r3) ; Point to line 5
- bf 8,nol4 ; No line 4 to do...
- dcba br0,r11 ; Allocate cache line 4
-
-nol4:
- la r13,savevr6(r3) ; Point to R6/R7 pair
- bf 20,novr4 ; Do not save VR4...
- stvxl v4,br0,r12 ; Save VR4
-
-novr4:
- bf 21,novr5 ; Do not save VR5...
- stvxl v5,r14,r12 ; Save VR5
-
-novr5:
- mtcrf 0x08,r10 ; Set CRs for registers 16-19
- la r11,savevr12(r3) ; Point to line 6
- bf 10,nol5 ; No line 5 to do...
- dcba br0,r21 ; Allocate cache line 5
-
-nol5:
- la r12,savevr8(r3) ; Point to V8/V9 pair
- bf 22,novr6 ; Do not save VR6...
- stvxl v6,br0,r13 ; Save VR6
-
-novr6:
- bf 23,novr7 ; Do not save VR7...
- stvxl v7,r14,r13 ; Save VR7
-
-novr7:
-;
-; Note: CR5 is now free
-;
- la r21,savevr14(r3) ; Point to line 7
- bf 12,nol6 ; No line 6 to do...
- dcba br0,r11 ; Allocate cache line 6
-
-nol6:
- la r13,savevr10(r3) ; Point to V10/V11 pair
- bf 24,novr8 ; Do not save VR8...
- stvxl v8,br0,r12 ; Save VR8
-
-novr8:
- bf 25,novr9 ; Do not save VR9...
- stvxl v9,r14,r12 ; Save VR9
-
-novr9:
- mtcrf 0x04,r10 ; Set CRs for registers 20-23
- la r11,savevr16(r3) ; Point to line 8
- bf 14,nol7 ; No line 7 to do...
- dcba br0,r21 ; Allocate cache line 7
+ bl vr_store ; store VRs into savearea according to vrsave (uses r4-r11)
-nol7:
- la r12,savevr12(r3) ; Point to V12/V13 pair
- bf 26,novr10 ; Do not save VR10...
- stvxl v10,br0,r13 ; Save VR10
-
-novr10:
- bf 27,novr11 ; Do not save VR11...
- stvxl v11,r14,r13 ; Save VR11
-
-novr11:
-
-;
-; Note: CR6 is now free
-;
- la r21,savevr18(r3) ; Point to line 9
- bf 1,nol8 ; No line 8 to do...
- dcba br0,r11 ; Allocate cache line 8
-
-nol8:
- la r13,savevr14(r3) ; Point to V14/V15 pair
- bf 28,novr12 ; Do not save VR12...
- stvxl v12,br0,r12 ; Save VR12
-
-novr12:
- bf 29,novr13 ; Do not save VR13...
- stvxl v13,r14,r12 ; Save VR13
-
-novr13:
- mtcrf 0x02,r10 ; Set CRs for registers 24-27
- la r11,savevr20(r3) ; Point to line 10
- bf 3,nol9 ; No line 9 to do...
- dcba br0,r21 ; Allocate cache line 9
-
-nol9:
- la r12,savevr16(r3) ; Point to V16/V17 pair
- bf 30,novr14 ; Do not save VR14...
- stvxl v14,br0,r13 ; Save VR14
-
-novr14:
- bf 31,novr15 ; Do not save VR15...
- stvxl v15,r14,r13 ; Save VR15
-
-novr15:
-;
-; Note: CR7 is now free
-;
- la r21,savevr22(r3) ; Point to line 11
- bf 5,nol10 ; No line 10 to do...
- dcba br0,r11 ; Allocate cache line 10
-
-nol10:
- la r13,savevr18(r3) ; Point to V18/V19 pair
- bf 16,novr16 ; Do not save VR16...
- stvxl v16,br0,r12 ; Save VR16
-
-novr16:
- bf 17,novr17 ; Do not save VR17...
- stvxl v17,r14,r12 ; Save VR17
-
-novr17:
- mtcrf 0x01,r10 ; Set CRs for registers 28-31
-;
-; Note: All registers have been or are accounted for in CRs
-;
- la r11,savevr24(r3) ; Point to line 12
- bf 7,nol11 ; No line 11 to do...
- dcba br0,r21 ; Allocate cache line 11
-
-nol11:
- la r12,savevr20(r3) ; Point to V20/V21 pair
- bf 18,novr18 ; Do not save VR18...
- stvxl v18,br0,r13 ; Save VR18
-
-novr18:
- bf 19,novr19 ; Do not save VR19...
- stvxl v19,r14,r13 ; Save VR19
-
-novr19:
- la r21,savevr26(r3) ; Point to line 13
- bf 9,nol12 ; No line 12 to do...
- dcba br0,r11 ; Allocate cache line 12
-
-nol12:
- la r13,savevr22(r3) ; Point to V22/V23 pair
- bf 20,novr20 ; Do not save VR20...
- stvxl v20,br0,r12 ; Save VR20
-
-novr20:
- bf 21,novr21 ; Do not save VR21...
- stvxl v21,r14,r12 ; Save VR21
-
-novr21:
- la r11,savevr28(r3) ; Point to line 14
- bf 11,nol13 ; No line 13 to do...
- dcba br0,r21 ; Allocate cache line 13
-
-nol13:
- la r12,savevr24(r3) ; Point to V24/V25 pair
- bf 22,novr22 ; Do not save VR22...
- stvxl v22,br0,r13 ; Save VR22
-
-novr22:
- bf 23,novr23 ; Do not save VR23...
- stvxl v23,r14,r13 ; Save VR23
-
-novr23:
- la r21,savevr30(r3) ; Point to line 15
- bf 13,nol14 ; No line 14 to do...
- dcba br0,r11 ; Allocate cache line 14
-
-nol14:
- la r13,savevr26(r3) ; Point to V26/V27 pair
- bf 24,novr24 ; Do not save VR24...
- stvxl v24,br0,r12 ; Save VR24
-
-novr24:
- bf 25,novr25 ; Do not save VR25...
- stvxl v25,r14,r12 ; Save VR25
-
-novr25:
- bf 15,nol15 ; No line 15 to do...
- dcba br0,r21 ; Allocate cache line 15
-
-nol15:
-;
-; Note: All cache lines allocated now
-;
- la r12,savevr28(r3) ; Point to V28/V29 pair
- bf 26,novr26 ; Do not save VR26...
- stvxl v26,br0,r13 ; Save VR26
-
-novr26:
- bf 27,novr27 ; Do not save VR27...
- stvxl v27,r14,r13 ; Save VR27
-
-novr27:
- la r13,savevr30(r3) ; Point to V30/V31 pair
- bf 28,novr28 ; Do not save VR28...
- stvxl v28,br0,r12 ; Save VR28
-
-novr28:
- bf 29,novr29 ; Do not save VR29...
- stvxl v29,r14,r12 ; Save VR29
-
-novr29:
- bf 30,novr30 ; Do not save VR30...
- stvxl v30,br0,r13 ; Save VR30
-
-novr30:
- bf 31,novr31 ; Do not save VR31...
- stvxl v31,r14,r13 ; Save VR31
-
-novr31:
-
-
-
;
; The context is all saved now and the facility is free.
;
-; If we do not we need to fill the registers with junk, because this level has
+; Check if we need to fill the registers with junk, because this level has
; never used them before and some thieving bastard could hack the old values
; of some thread! Just imagine what would happen if they could! Why, nothing
; would be safe! My God! It is terrifying!
; Also, along the way, thanks to Ian Ollmann, we generate the 0x7FFFDEAD (QNaNbarbarian)
; constant that we may need to fill unused vector registers.
;
+; Make sure that the live context block is not mucked with while
+; we are trying to load it up
+;
+
+vswnosavelk:
+ li r7,0 ; Get the unlock value
+ eieio ; Make sure that these updates make it out
+ stw r7,VMXsync(r22) ; Unlock the old context
+
+vswnosave: la r15,VMXsync(r29) ; Point to the sync word
+ lis r11,ha16(EXT(LockTimeOut)) ; Get the high part
+ mftb r3 ; Get the time now
+ lwz r11,lo16(EXT(LockTimeOut))(r11) ; Get the timeout value
+ b vswnsync0a ; Jump to the lock...
+
+ .align 5
+
+vswnsync0: li r19,lgKillResv ; Get killing field
+ stwcx. r19,0,r19 ; Kill reservation
+vswnsync0a: lwz r19,0(r15) ; Sniff the lock
+ mftb r18 ; Is it time yet?
+ cmplwi cr1,r19,0 ; Is it locked?
+ sub r18,r18,r3 ; How long have we been spinning?
+ cmplw r18,r11 ; Has it been too long?
+ bgt-- vswtimeout1 ; Way too long, panic...
+ bne-- cr1,vswnsync0a ; Yea, still locked so sniff harder...
+vswnsync1: lwarx r19,0,r15 ; Get the sync word
+ li r0,1 ; Get the lock
+ mr. r19,r19 ; Is it unlocked?
+ bne-- vswnsync0 ; Unfortunately, it is locked...
+ stwcx. r0,0,r15 ; Store lock and test reservation
+ bne-- vswnsync1 ; Try again if lost reservation...
+ isync ; Toss speculation
-vsnosave: vspltisb v31,-10 ; Get 0xF6F6F6F6
+ vspltisb v31,-10 ; Get 0xF6F6F6F6
lwz r15,ACT_MACT_PCB(r17) ; Get the current level of the "new" one
vspltisb v30,5 ; Get 0x05050505
lwz r19,VMXcpu(r29) ; Get the last CPU we ran on
sc ; (TEST/DEBUG)
#endif
- lis r18,hi16(EXT(per_proc_info)) ; Set base per_proc
+ lis r18,hi16(EXT(PerProcTable)) ; Set base PerProcTable
vspltisb v28,-2 ; Get 0xFEFEFEFE
- mulli r19,r19,ppSize ; Find offset to the owner per_proc
+ mulli r19,r19,ppeSize ; Find offset to the owner per_proc_entry
vsubuhm v31,v31,v29 ; Get 0xDEDADEDA
- ori r18,r18,lo16(EXT(per_proc_info)) ; Set base per_proc
+ ori r18,r18,lo16(EXT(PerProcTable)) ; Set base PerProcTable
vpkpx v30,v28,v3 ; Get 0x7FFF7FFF
li r16,VMXowner ; Displacement to vector owner
- add r19,r18,r19 ; Point to the owner per_proc
+ add r19,r18,r19 ; Point to the owner per_proc_entry
+ lwz r19,ppe_vaddr(r19) ; Point to the owner per_proc
vrlb v31,v31,v29 ; Get 0xDEADDEAD
- li r0,0
-vsinvothr: lwarx r18,r16,r19 ; Get the owner
- cmplw r18,r29 ; Does he still have this context?
- bne vsinvoths ; Nope...
- stwcx. r0,r16,r19 ; Try to invalidate it
- bne- vsinvothr ; Try again if there was a collision...
-
+vswinvothr: lwarx r18,r16,r19 ; Get the owner
+
+ sub r0,r18,r29 ; Subtract one from the other
+ sub r11,r29,r18 ; Subtract the other from the one
+ or r11,r11,r0 ; Combine them
+ srawi r11,r11,31 ; Get a 0 if equal or -1 of not
+ and r18,r18,r11 ; Make 0 if same, unchanged if not
+ stwcx. r18,r16,r19 ; Try to invalidate it
+ bne-- vswinvothr ; Try again if there was a collision...
-vsinvoths: cmplwi cr1,r14,0 ; Do we possibly have some context to load?
+ cmplwi cr1,r14,0 ; Do we possibly have some context to load?
vmrghh v31,v30,v31 ; Get 0x7FFFDEAD. V31 keeps this value until the bitter end
stw r15,VMXlevel(r29) ; Set the "new" active level
eieio
stw r29,VMXowner(r26) ; Mark us as having the live context
- beq- cr1,ProtectTheAmericanWay ; Nothing to restore, first time use...
+ beq-- cr1,ProtectTheAmericanWay ; Nothing to restore, first time use...
- lwz r3,SAVprev(r14) ; Get the previous context
+ lwz r3,SAVprev+4(r14) ; Get the previous context
lwz r0,SAVlevel(r14) ; Get the level of first facility savearea
cmplw r0,r15 ; Top level correct to load?
- bne- ProtectTheAmericanWay ; No, go initialize...
+ bne-- ProtectTheAmericanWay ; No, go initialize...
stw r3,VMXsave(r29) ; Pop the context (we will toss the savearea later)
sc ; (TEST/DEBUG)
#endif
- lwz r22,savevrsave(r25) ; Get the most current VRSAVE
lwz r10,savevrvalid(r14) ; Get the valid VRs in the savearea
- lis r9,0x5555 ; Mask with odd bits set
+ lwz r22,savevrsave(r25) ; Get the most current VRSAVE
and r10,r10,r22 ; Figure out just what registers need to be loaded
- ori r9,r9,0x5555 ; Finish mask
- rlwinm r11,r10,1,0,31 ; Shift over 1
- or r12,r10,r11 ; After this, even bits show which lines to touch
- andc r13,r12,r9 ; Clear out odd bits
-
- la r20,savevr0(r14) ; Point to line 0
- rlwinm r3,r13,15,0,15 ; Move line 8-15 flags to high order odd bits
- la r21,savevr2(r3) ; Point to line 1
- or r3,r13,r3 ; Set the odd bits
- ; (bit 0 is line 0, bit 1 is line 8,
- ; bit 2 is line 1, bit 3 is line 9, etc.
- rlwimi r3,r10,16,16,31 ; Put vrsave 0 - 15 into positions 16 - 31
- mtcrf 255,r3 ; Load up the CRs
- mr r22,r20 ; Start registers off
-;
-; Load the new vector state
-;
-
- bf 0,lnol0 ; No line 0 to do...
- dcbt br0,r20 ; Touch cache line 0
-
-lnol0:
- la r20,savevr4(r14) ; Point to line 2
- bf 2,lnol1 ; No line 1 to do...
- dcbt br0,r21 ; Touch cache line 1
-
-lnol1:
- la r21,savevr6(r14) ; Point to line 3
- bf 4,lnol2 ; No line 2 to do...
- dcbt br0,r20 ; Touch cache line 2
-
-lnol2:
- li r30,16 ; Get offset for odd registers
- bf 16,lnovr0 ; Do not restore VR0...
- lvxl v0,br0,r22 ; Restore VR0
-
-lnovr0:
- la r23,savevr2(r14) ; Point to V2/V3 pair
- bf 17,lnovr1 ; Do not restore VR1...
- lvxl v1,r30,r22 ; Restore VR1
-
-lnovr1:
- la r20,savevr8(r14) ; Point to line 4
- bf 6,lnol3 ; No line 3 to do...
- dcbt br0,r21 ; Touch cache line 3
-
-lnol3:
- la r22,savevr4(r14) ; Point to V4/V5 pair
- bf 18,lnovr2 ; Do not restore VR2...
- lvxl v2,br0,r23 ; Restore VR2
-
-lnovr2:
- bf 19,lnovr3 ; Do not restore VR3...
- lvxl v3,r30,r23 ; Restore VR3
-
-lnovr3:
-;
-; Note: CR4 is now free
-;
- la r21,savevr10(r14) ; Point to line 5
- bf 8,lnol4 ; No line 4 to do...
- dcbt br0,r20 ; Touch cache line 4
-
-lnol4:
- la r23,savevr6(r14) ; Point to R6/R7 pair
- bf 20,lnovr4 ; Do not restore VR4...
- lvxl v4,br0,r22 ; Restore VR4
-
-lnovr4:
- bf 21,lnovr5 ; Do not restore VR5...
- lvxl v5,r30,r22 ; Restore VR5
-
-lnovr5:
- mtcrf 0x08,r10 ; Set CRs for registers 16-19
- la r20,savevr12(r14) ; Point to line 6
- bf 10,lnol5 ; No line 5 to do...
- dcbt br0,r21 ; Touch cache line 5
-
-lnol5:
- la r22,savevr8(r14) ; Point to V8/V9 pair
- bf 22,lnovr6 ; Do not restore VR6...
- lvxl v6,br0,r23 ; Restore VR6
-
-lnovr6:
- bf 23,lnovr7 ; Do not restore VR7...
- lvxl v7,r30,r23 ; Restore VR7
-
-lnovr7:
-;
-; Note: CR5 is now free
-;
- la r21,savevr14(r14) ; Point to line 7
- bf 12,lnol6 ; No line 6 to do...
- dcbt br0,r20 ; Touch cache line 6
-
-lnol6:
- la r23,savevr10(r14) ; Point to V10/V11 pair
- bf 24,lnovr8 ; Do not restore VR8...
- lvxl v8,br0,r22 ; Restore VR8
-
-lnovr8:
- bf 25,lnovr9 ; Do not save VR9...
- lvxl v9,r30,r22 ; Restore VR9
-
-lnovr9:
- mtcrf 0x04,r10 ; Set CRs for registers 20-23
- la r20,savevr16(r14) ; Point to line 8
- bf 14,lnol7 ; No line 7 to do...
- dcbt br0,r21 ; Touch cache line 7
-
-lnol7:
- la r22,savevr12(r14) ; Point to V12/V13 pair
- bf 26,lnovr10 ; Do not restore VR10...
- lvxl v10,br0,r23 ; Restore VR10
-
-lnovr10:
- bf 27,lnovr11 ; Do not restore VR11...
- lvxl v11,r30,r23 ; Restore VR11
-
-lnovr11:
+ mr r3,r14 ; r3 <- ptr to savearea with VRs
+ bl vr_load ; load VRs from save area based on vrsave in r10
+
+ bl EXT(save_ret) ; Toss the save area after loading VRs
-;
-; Note: CR6 is now free
-;
- la r21,savevr18(r14) ; Point to line 9
- bf 1,lnol8 ; No line 8 to do...
- dcbt br0,r20 ; Touch cache line 8
-
-lnol8:
- la r23,savevr14(r14) ; Point to V14/V15 pair
- bf 28,lnovr12 ; Do not restore VR12...
- lvxl v12,br0,r22 ; Restore VR12
-
-lnovr12:
- bf 29,lnovr13 ; Do not restore VR13...
- lvxl v13,r30,r22 ; Restore VR13
-
-lnovr13:
- mtcrf 0x02,r10 ; Set CRs for registers 24-27
- la r20,savevr20(r14) ; Point to line 10
- bf 3,lnol9 ; No line 9 to do...
- dcbt br0,r21 ; Touch cache line 9
-
-lnol9:
- la r22,savevr16(r14) ; Point to V16/V17 pair
- bf 30,lnovr14 ; Do not restore VR14...
- lvxl v14,br0,r23 ; Restore VR14
-
-lnovr14:
- bf 31,lnovr15 ; Do not restore VR15...
- lvxl v15,r30,r23 ; Restore VR15
-
-lnovr15:
-;
-; Note: CR7 is now free
-;
- la r21,savevr22(r14) ; Point to line 11
- bf 5,lnol10 ; No line 10 to do...
- dcbt br0,r20 ; Touch cache line 10
-
-lnol10:
- la r23,savevr18(r14) ; Point to V18/V19 pair
- bf 16,lnovr16 ; Do not restore VR16...
- lvxl v16,br0,r22 ; Restore VR16
-
-lnovr16:
- bf 17,lnovr17 ; Do not restore VR17...
- lvxl v17,r30,r22 ; Restore VR17
-
-lnovr17:
- mtcrf 0x01,r10 ; Set CRs for registers 28-31
-;
-; Note: All registers have been or are accounted for in CRs
-;
- la r20,savevr24(r14) ; Point to line 12
- bf 7,lnol11 ; No line 11 to do...
- dcbt br0,r21 ; Touch cache line 11
-
-lnol11:
- la r22,savevr20(r14) ; Point to V20/V21 pair
- bf 18,lnovr18 ; Do not restore VR18...
- lvxl v18,br0,r23 ; Restore VR18
-
-lnovr18:
- bf 19,lnovr19 ; Do not restore VR19...
- lvxl v19,r30,r23 ; Restore VR19
-
-lnovr19:
- la r21,savevr26(r14) ; Point to line 13
- bf 9,lnol12 ; No line 12 to do...
- dcbt br0,r20 ; Touch cache line 12
-
-lnol12:
- la r23,savevr22(r14) ; Point to V22/V23 pair
- bf 20,lnovr20 ; Do not restore VR20...
- lvxl v20,br0,r22 ; Restore VR20
-
-lnovr20:
- bf 21,lnovr21 ; Do not restore VR21...
- lvxl v21,r30,r22 ; Restore VR21
-
-lnovr21:
- la r20,savevr28(r14) ; Point to line 14
- bf 11,lnol13 ; No line 13 to do...
- dcbt br0,r21 ; Touch cache line 13
-
-lnol13:
- la r22,savevr24(r14) ; Point to V24/V25 pair
- bf 22,lnovr22 ; Do not restore VR22...
- lvxl v22,br0,r23 ; Restore VR22
-
-lnovr22:
- bf 23,lnovr23 ; Do not restore VR23...
- lvxl v23,r30,r23 ; Restore VR23
-
-lnovr23:
- la r21,savevr30(r14) ; Point to line 15
- bf 13,lnol14 ; No line 14 to do...
- dcbt br0,r20 ; Touch cache line 14
-
-lnol14:
- la r23,savevr26(r14) ; Point to V26/V27 pair
- bf 24,lnovr24 ; Do not restore VR24...
- lvxl v24,br0,r22 ; Restore VR24
-
-lnovr24:
- bf 25,lnovr25 ; Do not restore VR25...
- lvxl v25,r30,r22 ; Restore VR25
-
-lnovr25:
- bf 15,lnol15 ; No line 15 to do...
- dcbt br0,r21 ; Touch cache line 15
-
-lnol15:
-;
-; Note: All needed cache lines have been touched now
-;
- la r22,savevr28(r14) ; Point to V28/V29 pair
- bf 26,lnovr26 ; Do not restore VR26...
- lvxl v26,br0,r23 ; Restore VR26
-
-lnovr26:
- bf 27,lnovr27 ; Do not restore VR27...
- lvxl v27,r30,r23 ; Restore VR27
-
-lnovr27:
- la r23,savevr30(r14) ; Point to V30/V31 pair
- bf 28,lnovr28 ; Do not restore VR28...
- lvxl v28,br0,r22 ; Restore VR28
+vrenablelk: li r7,0 ; Get the unlock value
+ eieio ; Make sure that these updates make it out
+ stw r7,VMXsync(r29) ; Unlock the new context
-lnovr28:
- bf 29,lnovr29 ; Do not restore VR29...
- lvxl v29,r30,r22 ; Restore VR29
-
-lnovr29:
- bf 30,lnovr30 ; Do not restore VR30...
- lvxl v30,br0,r23 ; Restore VR30
-
-lnovr30:
-;
-; Everything is restored now except for VR31. We need it to get
-; the QNaNBarbarian value to put into idle vector registers.
-; Note: V31 was set above to QNaNbarbarian
-;
-
- cmpwi r10,-1 ; Handle the quick case of all registers in use
- beq- mstlvr31 ; Not likely, but all are in use...
- mtcrf 255,r10 ; Get mask of valid registers
-
- bt 0,ni0 ; Register is ok already...
- vor v0,v31,v31 ; Copy into the next register
-ni0:
- bt 1,ni1 ; Register is ok already...
- vor v1,v31,v31 ; Copy into the next register
-ni1:
- bt 2,ni2 ; Register is ok already...
- vor v2,v31,v31 ; Copy into the next register
-ni2:
- bt 3,ni3 ; Register is ok already...
- vor v3,v31,v31 ; Copy into the next register
-ni3:
- bt 4,ni4 ; Register is ok already...
- vor v4,v31,v31 ; Copy into the next register
-ni4:
- bt 5,ni5 ; Register is ok already...
- vor v5,v31,v31 ; Copy into the next register
-ni5:
- bt 6,ni6 ; Register is ok already...
- vor v6,v31,v31 ; Copy into the next register
-ni6:
- bt 7,ni7 ; Register is ok already...
- vor v7,v31,v31 ; Copy into the next register
-ni7:
- bt 8,ni8 ; Register is ok already...
- vor v8,v31,v31 ; Copy into the next register
-ni8:
- bt 9,ni9 ; Register is ok already...
- vor v9,v31,v31 ; Copy into the next register
-ni9:
- bt 10,ni10 ; Register is ok already...
- vor v10,v31,v31 ; Copy into the next register
-ni10:
- bt 11,ni11 ; Register is ok already...
- vor v11,v31,v31 ; Copy into the next register
-ni11:
- bt 12,ni12 ; Register is ok already...
- vor v12,v31,v31 ; Copy into the next register
-ni12:
- bt 13,ni13 ; Register is ok already...
- vor v13,v31,v31 ; Copy into the next register
-ni13:
- bt 14,ni14 ; Register is ok already...
- vor v14,v31,v31 ; Copy into the next register
-ni14:
- bt 15,ni15 ; Register is ok already...
- vor v15,v31,v31 ; Copy into the next register
-ni15:
- bt 16,ni16 ; Register is ok already...
- vor v16,v31,v31 ; Copy into the next register
-ni16:
- bt 17,ni17 ; Register is ok already...
- vor v17,v31,v31 ; Copy into the next register
-ni17:
- bt 18,ni18 ; Register is ok already...
- vor v18,v31,v31 ; Copy into the next register
-ni18:
- bt 19,ni19 ; Register is ok already...
- vor v19,v31,v31 ; Copy into the next register
-ni19:
- bt 20,ni20 ; Register is ok already...
- vor v20,v31,v31 ; Copy into the next register
-ni20:
- bt 21,ni21 ; Register is ok already...
- vor v21,v31,v31 ; Copy into the next register
-ni21:
- bt 22,ni22 ; Register is ok already...
- vor v22,v31,v31 ; Copy into the next register
-ni22:
- bt 23,ni23 ; Register is ok already...
- vor v23,v31,v31 ; Copy into the next register
-ni23:
- bt 24,ni24 ; Register is ok already...
- vor v24,v31,v31 ; Copy into the next register
-ni24:
- bt 25,ni25 ; Register is ok already...
- vor v25,v31,v31 ; Copy into the next register
-ni25:
- bt 26,ni26 ; Register is ok already...
- vor v26,v31,v31 ; Copy into the next register
-ni26:
- bt 27,ni27 ; Register is ok already...
- vor v27,v31,v31 ; Copy into the next register
-ni27:
- bt 28,ni28 ; Register is ok already...
- vor v28,v31,v31 ; Copy into the next register
-ni28:
- bt 29,ni29 ; Register is ok already...
- vor v29,v31,v31 ; Copy into the next register
-ni29:
- bt 30,ni30 ; Register is ok already...
- vor v30,v31,v31 ; Copy into the next register
-ni30:
- bf 31,lnovr31 ; V31 is empty, no need to restore...
-
-mstlvr31: lvxl v31,r30,r23 ; Restore VR31
-
-lnovr31: mr r3,r14 ; Get the old savearea (we popped it before)
- bl EXT(save_ret) ; Toss it
-
-vrenable: lwz r8,savesrr1(r25) ; Get the msr of the interrupted guy
- rlwinm r5,r25,0,0,19 ; Get the page address of the savearea
+vrenable: lwz r8,savesrr1+4(r25) ; Get the msr of the interrupted guy
oris r8,r8,hi16(MASK(MSR_VEC)) ; Enable the vector facility
lwz r10,ACT_MACT_SPF(r17) ; Get the act special flags
lwz r11,spcFlags(r26) ; Get per_proc spec flags cause not in sync with act
- lwz r5,SACvrswap(r5) ; Get Virtual to Real translation
oris r10,r10,hi16(vectorUsed|vectorCng) ; Set that we used vectors
oris r11,r11,hi16(vectorUsed|vectorCng) ; Set that we used vectors
rlwinm. r0,r8,0,MSR_PR_BIT,MSR_PR_BIT ; See if we are doing this for user state
- stw r8,savesrr1(r25) ; Set the msr of the interrupted guy
- xor r3,r25,r5 ; Get the real address of the savearea
+ stw r8,savesrr1+4(r25) ; Set the msr of the interrupted guy
+ mr r3,r25 ; Pass virtual address of the savearea
beq- vrnuser ; We are not user state...
stw r10,ACT_MACT_SPF(r17) ; Set the activation copy
stw r11,spcFlags(r26) ; Set per_proc copy
vor v28,v31,v31 ; Copy into the next register
vor v29,v31,v31 ; Copy into the next register
vor v30,v31,v31 ; Copy into the next register
- b vrenable ; Finish setting it all up...
+ b vrenablelk ; Finish setting it all up...
.align 5
-vsthesame:
+vswthesame:
#if FPVECDBG
lis r0,hi16(CutTrace) ; (TEST/DEBUG)
beq- cr1,vrenable ; Not saved yet, nothing to pop, go enable and exit...
lwz r11,SAVlevel(r30) ; Get the level of top saved context
- lwz r14,SAVprev(r30) ; Get the previous savearea
+ lwz r14,SAVprev+4(r30) ; Get the previous savearea
cmplw r11,r31 ; Are live and saved the same?
bne+ vrenable ; Level not the same, nothing to pop, go enable and exit...
mr r3,r30 ; Get the old savearea (we popped it before)
+ stw r11,VMXsave(r22) ; Pop the vector stack
bl EXT(save_ret) ; Toss it
b vrenable ; Go enable and exit...
LEXT(toss_live_vec)
+ lis r0,hi16(MASK(MSR_VEC)) ; Get VEC
mfmsr r9 ; Get the MSR
- rlwinm r0,r9,0,MSR_EE_BIT+1,MSR_EE_BIT-1 ; Clear interuptions
- rlwinm. r8,r9,0,MSR_VEC_BIT,MSR_VEC_BIT ; Is vector on right now?
- rlwinm r9,r9,0,MSR_VEC_BIT+1,MSR_VEC_BIT-1 ; Make sure vector is turned off
- rlwinm r9,r9,0,MSR_FP_BIT+1,MSR_FP_BIT-1 ; Make sure fpu is turned off
+ ori r0,r0,lo16(MASK(MSR_FP)) ; Add in FP
+ rlwinm. r8,r9,0,MSR_VEC_BIT,MSR_VEC_BIT ; Are vectors on right now?
+ andc r9,r9,r0 ; Force off VEC and FP
+ ori r0,r0,lo16(MASK(MSR_EE)) ; Turn off EE
+ andc r0,r9,r0 ; Turn off EE now
mtmsr r0 ; No interruptions
isync
beq+ tlvnotours ; Vector off, can not be live here...
- mfsprg r8,0 ; Get the per proc
+ mfsprg r8,1 ; Get the current activation
+ lwz r8,ACT_PER_PROC(r8) ; Get the per_proc block
;
; Note that at this point, since vecs are on, we are the owner
mtvscr v1 ; Set the non-java, no saturate status
tlvnotours: lwz r11,VMXcpu(r3) ; Get the cpu on which we last loaded context
- lis r12,hi16(EXT(per_proc_info)) ; Set base per_proc
- mulli r11,r11,ppSize ; Find offset to the owner per_proc
- ori r12,r12,lo16(EXT(per_proc_info)) ; Set base per_proc
+ lis r12,hi16(EXT(PerProcTable)) ; Set base PerProcTable
+ mulli r11,r11,ppeSize ; Find offset to the owner per_proc_entry
+ ori r12,r12,lo16(EXT(PerProcTable)) ; Set base PerProcTable
li r10,VMXowner ; Displacement to vector owner
- add r11,r12,r11 ; Point to the owner per_proc
+ add r11,r12,r11 ; Point to the owner per_proc_entry
+ lwz r11,ppe_vaddr(r11) ; Point to the owner per_proc
li r0,0 ; Set a 0 to invalidate context
tlvinvothr: lwarx r12,r10,r11 ; Get the owner
- cmplw r12,r3 ; Does he still have this context?
- bne+ tlvexit ; Nope, leave...
- stwcx. r0,r10,r11 ; Try to invalidate it
- bne- tlvinvothr ; Try again if there was a collision...
-tlvexit: mtmsr r9 ; Restore interruptions
+ sub r0,r12,r3 ; Subtract one from the other
+ sub r8,r3,r12 ; Subtract the other from the one
+ or r8,r8,r0 ; Combine them
+ srawi r8,r8,31 ; Get a 0 if equal or -1 of not
+ and r12,r12,r8 ; Make 0 if same, unchanged if not
+ stwcx. r12,r10,r11 ; Try to invalidate it
+ bne-- tlvinvothr ; Try again if there was a collision...
+
+ mtmsr r9 ; Restore interruptions
isync ; Could be turning off vectors here
blr ; Leave....
bnelr+ ; No, we do nothing...
lwz r11,VMXcpu(r3) ; Get the cpu on which we last loaded context
- lis r12,hi16(EXT(per_proc_info)) ; Set base per_proc
- mulli r11,r11,ppSize ; Find offset to the owner per_proc
- ori r12,r12,lo16(EXT(per_proc_info)) ; Set base per_proc
+ lis r12,hi16(EXT(PerProcTable)) ; Set base PerProcTable
+ mulli r11,r11,ppeSize ; Find offset to the owner per_proc_entry
+ ori r12,r12,lo16(EXT(PerProcTable)) ; Set base PerProcTable
li r10,VMXowner ; Displacement to vector owner
- add r11,r12,r11 ; Point to the owner per_proc
- li r0,0 ; Set a 0 to invalidate context
+ add r11,r12,r11 ; Point to the owner per_proc_entry
+ lwz r11,ppe_vaddr(r11) ; Point to the owner per_proc
vtinvothr: lwarx r12,r10,r11 ; Get the owner
- cmplw r12,r3 ; Does he still have this context?
- bne vtnotlive ; Nope, not live anywhere...
- stwcx. r0,r10,r11 ; Try to invalidate it
- bne- vtinvothr ; Try again if there was a collision...
-vtnotlive: beqlr+ cr1 ; Leave if there is no savearea
+ sub r0,r12,r3 ; Subtract one from the other
+ sub r8,r3,r12 ; Subtract the other from the one
+ or r8,r8,r0 ; Combine them
+ srawi r8,r8,31 ; Get a 0 if equal or -1 of not
+ and r12,r12,r8 ; Make 0 if same, unchanged if not
+ stwcx. r12,r10,r11 ; Try to invalidate it
+ bne-- vtinvothr ; Try again if there was a collision...
+
+
+ beqlr++ cr1 ; Leave if there is no savearea
lwz r8,SAVlevel(r9) ; Get the level of the savearea
cmplw r8,r11 ; Savearea for the current level?
- bnelr+ ; No, nothing to release...
+ bnelr++ ; No, nothing to release...
- lwz r8,SAVprev(r9) ; Pick up the previous area
+ lwz r8,SAVprev+4(r9) ; Pick up the previous area
mr. r8,r8 ; Is there a previous?
- beq- vtnoprev ; Nope...
+ beq-- vtnoprev ; Nope...
lwz r7,SAVlevel(r8) ; Get the level associated with save
vtnoprev: stw r8,VMXsave(r3) ; Dequeue this savearea
LEXT(fctx_test)
- mfsprg r3,0 ; Get the per_proc block
- lwz r3,PP_ACTIVE_THREAD(r3) ; Get the thread pointer
+ mfsprg r3,1 ; Get the current thread
mr. r3,r3 ; Are we actually up and running?
beqlr- ; No...
mtspr vrsave,r5 ; Set VRSave
vor v0,v0,v0 ; Use vectors
blr
+
+
+// *******************
+// * f p _ s t o r e *
+// *******************
+//
+// Store FPRs into a save area. Called by fpu_save and fpu_switch.
+//
+// When called:
+// floating pt is enabled
+// r3 = ptr to save area
+//
+// We destroy:
+// r11.
+
+fp_store:
+ mfsprg r11,2 ; get feature flags
+ mtcrf 0x02,r11 ; put cache line size bits in cr6
+ la r11,savefp0(r3) ; point to 1st line
+ dcbz128 0,r11 ; establish 1st line no matter what linesize is
+ bt-- pf32Byteb,fp_st32 ; skip if a 32-byte machine
+
+// Store the FPRs on a 128-byte machine.
+
+ stfd f0,savefp0(r3)
+ stfd f1,savefp1(r3)
+ la r11,savefp16(r3) ; Point to the 2nd cache line
+ stfd f2,savefp2(r3)
+ stfd f3,savefp3(r3)
+ dcbz128 0,r11 ; establish 2nd line
+ stfd f4,savefp4(r3)
+ stfd f5,savefp5(r3)
+ stfd f6,savefp6(r3)
+ stfd f7,savefp7(r3)
+ stfd f8,savefp8(r3)
+ stfd f9,savefp9(r3)
+ stfd f10,savefp10(r3)
+ stfd f11,savefp11(r3)
+ stfd f12,savefp12(r3)
+ stfd f13,savefp13(r3)
+ stfd f14,savefp14(r3)
+ stfd f15,savefp15(r3)
+ stfd f16,savefp16(r3)
+ stfd f17,savefp17(r3)
+ stfd f18,savefp18(r3)
+ stfd f19,savefp19(r3)
+ stfd f20,savefp20(r3)
+ stfd f21,savefp21(r3)
+ stfd f22,savefp22(r3)
+ stfd f23,savefp23(r3)
+ stfd f24,savefp24(r3)
+ stfd f25,savefp25(r3)
+ stfd f26,savefp26(r3)
+ stfd f27,savefp27(r3)
+ stfd f28,savefp28(r3)
+ stfd f29,savefp29(r3)
+ stfd f30,savefp30(r3)
+ stfd f31,savefp31(r3)
+ blr
+
+// Store FPRs on a 32-byte machine.
+
+fp_st32:
+ la r11,savefp4(r3) ; Point to the 2nd line
+ stfd f0,savefp0(r3)
+ dcbz 0,r11 ; Allocate cache
+ stfd f1,savefp1(r3)
+ stfd f2,savefp2(r3)
+ la r11,savefp8(r3) ; Point to the 3rd line
+ stfd f3,savefp3(r3)
+ dcbz 0,r11 ; Allocate cache
+ stfd f4,savefp4(r3)
+ stfd f5,savefp5(r3)
+ stfd f6,savefp6(r3)
+ la r11,savefp12(r3) ; Point to the 4th line
+ stfd f7,savefp7(r3)
+ dcbz 0,r11 ; Allocate cache
+ stfd f8,savefp8(r3)
+ stfd f9,savefp9(r3)
+ stfd f10,savefp10(r3)
+ la r11,savefp16(r3) ; Point to the 5th line
+ stfd f11,savefp11(r3)
+ dcbz 0,r11 ; Allocate cache
+ stfd f12,savefp12(r3)
+ stfd f13,savefp13(r3)
+ stfd f14,savefp14(r3)
+ la r11,savefp20(r3) ; Point to the 6th line
+ stfd f15,savefp15(r3)
+ dcbz 0,r11 ; Allocate cache
+ stfd f16,savefp16(r3)
+ stfd f17,savefp17(r3)
+ stfd f18,savefp18(r3)
+ la r11,savefp24(r3) ; Point to the 7th line
+ stfd f19,savefp19(r3)
+ dcbz 0,r11 ; Allocate cache
+ stfd f20,savefp20(r3)
+
+ stfd f21,savefp21(r3)
+ stfd f22,savefp22(r3)
+ la r11,savefp28(r3) ; Point to the 8th line
+ stfd f23,savefp23(r3)
+ dcbz 0,r11 ; allocate it
+ stfd f24,savefp24(r3)
+ stfd f25,savefp25(r3)
+ stfd f26,savefp26(r3)
+ stfd f27,savefp27(r3)
+
+ stfd f28,savefp28(r3)
+ stfd f29,savefp29(r3)
+ stfd f30,savefp30(r3)
+ stfd f31,savefp31(r3)
+ blr
+
+
+// *******************
+// * v r _ s t o r e *
+// *******************
+//
+// Store VRs into savearea, according to bits set in passed vrsave bitfield. This routine is used
+// both by vec_save and vec_switch. In order to minimize conditional branches and touching in
+// unnecessary cache blocks, we either save all or none of the VRs in a block. We have separate paths
+// for each cache block size.
+//
+// When called:
+// interrupts are off, vectors are enabled
+// r3 = ptr to save area
+// r10 = vrsave (not 0)
+//
+// We destroy:
+// r4 - r11, all CRs.
+
+vr_store:
+ mfsprg r9,2 ; get feature flags
+ stw r10,savevrvalid(r3) ; Save the validity information in savearea
+ slwi r8,r10,1 ; Shift over 1
+ mtcrf 0x02,r9 ; put cache line size bits in cr6 where we can test
+ or r8,r10,r8 ; r8 <- even bits show which pairs are in use
+ bt-- pf32Byteb,vr_st32 ; skip if 32-byte cacheline processor
+
+
+; Save vectors on a 128-byte linesize processor. We save all or none of the 8 registers in each of
+; the four cache lines. This minimizes mispredicted branches yet handles cache lines optimally.
+
+ slwi r7,r8,2 ; shift groups-of-2 over by 2
+ li r4,16 ; load offsets for X-form stores
+ or r8,r7,r8 ; show if any in group of 4 are in use
+ li r5,32
+ slwi r7,r8,4 ; shift groups-of-4 over by 4
+ li r6,48
+ or r11,r7,r8 ; show if any in group of 8 are in use
+ li r7,64
+ mtcrf 0x80,r11 ; set CRs one at a time (faster)
+ li r8,80
+ mtcrf 0x20,r11
+ li r9,96
+ mtcrf 0x08,r11
+ li r10,112
+ mtcrf 0x02,r11
+
+ bf 0,vr_st64b ; skip if none of vr0-vr7 are in use
+ la r11,savevr0(r3) ; get address of this group of registers in save area
+ dcbz128 0,r11 ; zero the line
+ stvxl v0,0,r11 ; save 8 VRs in the line
+ stvxl v1,r4,r11
+ stvxl v2,r5,r11
+ stvxl v3,r6,r11
+ stvxl v4,r7,r11
+ stvxl v5,r8,r11
+ stvxl v6,r9,r11
+ stvxl v7,r10,r11
+
+vr_st64b:
+ bf 8,vr_st64c ; skip if none of vr8-vr15 are in use
+ la r11,savevr8(r3) ; get address of this group of registers in save area
+ dcbz128 0,r11 ; zero the line
+ stvxl v8,0,r11 ; save 8 VRs in the line
+ stvxl v9,r4,r11
+ stvxl v10,r5,r11
+ stvxl v11,r6,r11
+ stvxl v12,r7,r11
+ stvxl v13,r8,r11
+ stvxl v14,r9,r11
+ stvxl v15,r10,r11
+
+vr_st64c:
+ bf 16,vr_st64d ; skip if none of vr16-vr23 are in use
+ la r11,savevr16(r3) ; get address of this group of registers in save area
+ dcbz128 0,r11 ; zero the line
+ stvxl v16,0,r11 ; save 8 VRs in the line
+ stvxl v17,r4,r11
+ stvxl v18,r5,r11
+ stvxl v19,r6,r11
+ stvxl v20,r7,r11
+ stvxl v21,r8,r11
+ stvxl v22,r9,r11
+ stvxl v23,r10,r11
+
+vr_st64d:
+ bflr 24 ; done if none of vr24-vr31 are in use
+ la r11,savevr24(r3) ; get address of this group of registers in save area
+ dcbz128 0,r11 ; zero the line
+ stvxl v24,0,r11 ; save 8 VRs in the line
+ stvxl v25,r4,r11
+ stvxl v26,r5,r11
+ stvxl v27,r6,r11
+ stvxl v28,r7,r11
+ stvxl v29,r8,r11
+ stvxl v30,r9,r11
+ stvxl v31,r10,r11
+ blr
+
+; Save vectors on a 32-byte linesize processor. We save in 16 groups of 2: we either save both
+; or neither in each group. This cuts down on conditional branches.
+; r8 = bitmask with bit n set (for even n) if either of that pair of VRs is in use
+; r3 = savearea
+
+vr_st32:
+ mtcrf 0xFF,r8 ; set CR bits so we can branch on them
+ li r4,16 ; load offset for X-form stores
+
+ bf 0,vr_st32b ; skip if neither VR in this pair is in use
+ la r11,savevr0(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v0,0,r11 ; save the two VRs in the line
+ stvxl v1,r4,r11
+
+vr_st32b:
+ bf 2,vr_st32c ; skip if neither VR in this pair is in use
+ la r11,savevr2(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v2,0,r11 ; save the two VRs in the line
+ stvxl v3,r4,r11
+
+vr_st32c:
+ bf 4,vr_st32d ; skip if neither VR in this pair is in use
+ la r11,savevr4(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v4,0,r11 ; save the two VRs in the line
+ stvxl v5,r4,r11
+
+vr_st32d:
+ bf 6,vr_st32e ; skip if neither VR in this pair is in use
+ la r11,savevr6(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v6,0,r11 ; save the two VRs in the line
+ stvxl v7,r4,r11
+
+vr_st32e:
+ bf 8,vr_st32f ; skip if neither VR in this pair is in use
+ la r11,savevr8(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v8,0,r11 ; save the two VRs in the line
+ stvxl v9,r4,r11
+
+vr_st32f:
+ bf 10,vr_st32g ; skip if neither VR in this pair is in use
+ la r11,savevr10(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v10,0,r11 ; save the two VRs in the line
+ stvxl v11,r4,r11
+
+vr_st32g:
+ bf 12,vr_st32h ; skip if neither VR in this pair is in use
+ la r11,savevr12(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v12,0,r11 ; save the two VRs in the line
+ stvxl v13,r4,r11
+
+vr_st32h:
+ bf 14,vr_st32i ; skip if neither VR in this pair is in use
+ la r11,savevr14(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v14,0,r11 ; save the two VRs in the line
+ stvxl v15,r4,r11
+
+vr_st32i:
+ bf 16,vr_st32j ; skip if neither VR in this pair is in use
+ la r11,savevr16(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v16,0,r11 ; save the two VRs in the line
+ stvxl v17,r4,r11
+
+vr_st32j:
+ bf 18,vr_st32k ; skip if neither VR in this pair is in use
+ la r11,savevr18(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v18,0,r11 ; save the two VRs in the line
+ stvxl v19,r4,r11
+
+vr_st32k:
+ bf 20,vr_st32l ; skip if neither VR in this pair is in use
+ la r11,savevr20(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v20,0,r11 ; save the two VRs in the line
+ stvxl v21,r4,r11
+
+vr_st32l:
+ bf 22,vr_st32m ; skip if neither VR in this pair is in use
+ la r11,savevr22(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v22,0,r11 ; save the two VRs in the line
+ stvxl v23,r4,r11
+
+vr_st32m:
+ bf 24,vr_st32n ; skip if neither VR in this pair is in use
+ la r11,savevr24(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v24,0,r11 ; save the two VRs in the line
+ stvxl v25,r4,r11
+
+vr_st32n:
+ bf 26,vr_st32o ; skip if neither VR in this pair is in use
+ la r11,savevr26(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v26,0,r11 ; save the two VRs in the line
+ stvxl v27,r4,r11
+
+vr_st32o:
+ bf 28,vr_st32p ; skip if neither VR in this pair is in use
+ la r11,savevr28(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v28,0,r11 ; save the two VRs in the line
+ stvxl v29,r4,r11
+
+vr_st32p:
+ bflr 30 ; done if neither VR in this pair is in use
+ la r11,savevr30(r3) ; get address of this group of registers in save area
+ dcba 0,r11 ; establish the line wo reading it
+ stvxl v30,0,r11 ; save the two VRs in the line
+ stvxl v31,r4,r11
+ blr
+
+
+// *****************
+// * v r _ l o a d *
+// *****************
+//
+// Load live VRs from a savearea, according to bits set in a passed vector. This is the reverse
+// of "vr_store". Like it, we avoid touching unnecessary cache blocks and minimize conditional
+// branches by loading all VRs from a cache line, if we have to load any. If we don't load the VRs
+// in a cache line, we bug them. Note that this behavior is slightly different from earlier kernels,
+// which would bug all VRs that aren't live.
+//
+// When called:
+// interrupts are off, vectors are enabled
+// r3 = ptr to save area
+// r10 = vector of live regs to load (ie, savevrsave & savevrvalid, may be 0)
+// v31 = bugbug constant (0x7FFFDEAD7FFFDEAD7FFFDEAD7FFFDEAD)
+//
+// We destroy:
+// r4 - r11, all CRs.
+
+vr_load:
+ mfsprg r9,2 ; get feature flags
+ li r6,1 ; assuming 32-byte, get (#VRs)-1 in a cacheline
+ mtcrf 0x02,r9 ; set cache line size bits in cr6
+ lis r7,0xC000 ; assuming 32-byte, set bits 0-1
+ bt-- pf32Byteb,vr_ld0 ; skip if 32-bit processor
+ li r6,7 ; 128-byte machines have 8 VRs in a cacheline
+ lis r7,0xFF00 ; so set bits 0-7
+
+// Loop touching in cache blocks we will load from.
+// r3 = savearea ptr
+// r5 = we light bits for the VRs we will be loading
+// r6 = 1 if 32-byte, 7 if 128-byte
+// r7 = 0xC0000000 if 32-byte, 0xFF000000 if 128-byte
+// r10 = live VR bits
+// v31 = bugbug constant
+
+vr_ld0:
+ li r5,0 ; initialize set of VRs to load
+ la r11,savevr0(r3) ; get address of register file
+ b vr_ld2 ; enter loop in middle
+
+ .align 5
+vr_ld1: ; loop over each cache line we will load
+ dcbt r4,r11 ; start prefetch of the line
+ andc r10,r10,r9 ; turn off the bits in this line
+ or r5,r5,r9 ; we will load all these
+vr_ld2: ; initial entry pt
+ cntlzw r4,r10 ; get offset to next live VR
+ andc r4,r4,r6 ; cacheline align it
+ srw. r9,r7,r4 ; position bits for VRs in that cache line
+ slwi r4,r4,4 ; get byte offset within register file to that line
+ bne vr_ld1 ; loop if more bits in r10
+
+ bf-- pf128Byteb,vr_ld32 ; skip if not 128-byte lines
+
+// Handle a processor with 128-byte cache lines. Four groups of 8 VRs.
+// r3 = savearea ptr
+// r5 = 1st bit in each cacheline is 1 iff any reg in that line must be loaded
+// r11 = addr(savevr0)
+// v31 = bugbug constant
+
+ mtcrf 0x80,r5 ; set up bits for conditional branches
+ li r4,16 ; load offsets for X-form stores
+ li r6,48
+ mtcrf 0x20,r5 ; load CRs ona at a time, which is faster
+ li r7,64
+ li r8,80
+ mtcrf 0x08,r5
+ li r9,96
+ li r10,112
+ mtcrf 0x02,r5
+ li r5,32
+
+ bt 0,vr_ld128a ; skip if this line must be loaded
+ vor v0,v31,v31 ; no VR must be loaded, so bug them all
+ vor v1,v31,v31
+ vor v2,v31,v31
+ vor v3,v31,v31
+ vor v4,v31,v31
+ vor v5,v31,v31
+ vor v6,v31,v31
+ vor v7,v31,v31
+ b vr_ld128b
+vr_ld128a: ; must load from this line
+ lvxl v0,0,r11
+ lvxl v1,r4,r11
+ lvxl v2,r5,r11
+ lvxl v3,r6,r11
+ lvxl v4,r7,r11
+ lvxl v5,r8,r11
+ lvxl v6,r9,r11
+ lvxl v7,r10,r11
+
+vr_ld128b: ; here to handle next cache line
+ la r11,savevr8(r3) ; load offset to it
+ bt 8,vr_ld128c ; skip if this line must be loaded
+ vor v8,v31,v31 ; no VR must be loaded, so bug them all
+ vor v9,v31,v31
+ vor v10,v31,v31
+ vor v11,v31,v31
+ vor v12,v31,v31
+ vor v13,v31,v31
+ vor v14,v31,v31
+ vor v15,v31,v31
+ b vr_ld128d
+vr_ld128c: ; must load from this line
+ lvxl v8,0,r11
+ lvxl v9,r4,r11
+ lvxl v10,r5,r11
+ lvxl v11,r6,r11
+ lvxl v12,r7,r11
+ lvxl v13,r8,r11
+ lvxl v14,r9,r11
+ lvxl v15,r10,r11
+
+vr_ld128d: ; here to handle next cache line
+ la r11,savevr16(r3) ; load offset to it
+ bt 16,vr_ld128e ; skip if this line must be loaded
+ vor v16,v31,v31 ; no VR must be loaded, so bug them all
+ vor v17,v31,v31
+ vor v18,v31,v31
+ vor v19,v31,v31
+ vor v20,v31,v31
+ vor v21,v31,v31
+ vor v22,v31,v31
+ vor v23,v31,v31
+ b vr_ld128f
+vr_ld128e: ; must load from this line
+ lvxl v16,0,r11
+ lvxl v17,r4,r11
+ lvxl v18,r5,r11
+ lvxl v19,r6,r11
+ lvxl v20,r7,r11
+ lvxl v21,r8,r11
+ lvxl v22,r9,r11
+ lvxl v23,r10,r11
+
+vr_ld128f: ; here to handle next cache line
+ la r11,savevr24(r3) ; load offset to it
+ bt 24,vr_ld128g ; skip if this line must be loaded
+ vor v24,v31,v31 ; no VR must be loaded, so bug them all
+ vor v25,v31,v31
+ vor v26,v31,v31
+ vor v27,v31,v31
+ vor v28,v31,v31
+ vor v29,v31,v31
+ vor v30,v31,v31
+ blr
+vr_ld128g: ; must load from this line
+ lvxl v24,0,r11
+ lvxl v25,r4,r11
+ lvxl v26,r5,r11
+ lvxl v27,r6,r11
+ lvxl v28,r7,r11
+ lvxl v29,r8,r11
+ lvxl v30,r9,r11
+ lvxl v31,r10,r11
+ blr
+
+// Handle a processor with 32-byte cache lines. Sixteen groups of two VRs.
+// r5 = 1st bit in each cacheline is 1 iff any reg in that line must be loaded
+// r11 = addr(savevr0)
+
+vr_ld32:
+ mtcrf 0xFF,r5 ; set up bits for conditional branches
+ li r4,16 ; load offset for X-form stores
+
+ bt 0,vr_ld32load0 ; skip if we must load this line
+ vor v0,v31,v31 ; neither VR is live, so bug them both
+ vor v1,v31,v31
+ b vr_ld32test2
+vr_ld32load0: ; must load VRs in this line
+ lvxl v0,0,r11
+ lvxl v1,r4,r11
+
+vr_ld32test2: ; here to handle next cache line
+ la r11,savevr2(r3) ; get offset to next cache line
+ bt 2,vr_ld32load2 ; skip if we must load this line
+ vor v2,v31,v31 ; neither VR is live, so bug them both
+ vor v3,v31,v31
+ b vr_ld32test4
+vr_ld32load2: ; must load VRs in this line
+ lvxl v2,0,r11
+ lvxl v3,r4,r11
+
+vr_ld32test4: ; here to handle next cache line
+ la r11,savevr4(r3) ; get offset to next cache line
+ bt 4,vr_ld32load4 ; skip if we must load this line
+ vor v4,v31,v31 ; neither VR is live, so bug them both
+ vor v5,v31,v31
+ b vr_ld32test6
+vr_ld32load4: ; must load VRs in this line
+ lvxl v4,0,r11
+ lvxl v5,r4,r11
+
+vr_ld32test6: ; here to handle next cache line
+ la r11,savevr6(r3) ; get offset to next cache line
+ bt 6,vr_ld32load6 ; skip if we must load this line
+ vor v6,v31,v31 ; neither VR is live, so bug them both
+ vor v7,v31,v31
+ b vr_ld32test8
+vr_ld32load6: ; must load VRs in this line
+ lvxl v6,0,r11
+ lvxl v7,r4,r11
+
+vr_ld32test8: ; here to handle next cache line
+ la r11,savevr8(r3) ; get offset to next cache line
+ bt 8,vr_ld32load8 ; skip if we must load this line
+ vor v8,v31,v31 ; neither VR is live, so bug them both
+ vor v9,v31,v31
+ b vr_ld32test10
+vr_ld32load8: ; must load VRs in this line
+ lvxl v8,0,r11
+ lvxl v9,r4,r11
+
+vr_ld32test10: ; here to handle next cache line
+ la r11,savevr10(r3) ; get offset to next cache line
+ bt 10,vr_ld32load10 ; skip if we must load this line
+ vor v10,v31,v31 ; neither VR is live, so bug them both
+ vor v11,v31,v31
+ b vr_ld32test12
+vr_ld32load10: ; must load VRs in this line
+ lvxl v10,0,r11
+ lvxl v11,r4,r11
+
+vr_ld32test12: ; here to handle next cache line
+ la r11,savevr12(r3) ; get offset to next cache line
+ bt 12,vr_ld32load12 ; skip if we must load this line
+ vor v12,v31,v31 ; neither VR is live, so bug them both
+ vor v13,v31,v31
+ b vr_ld32test14
+vr_ld32load12: ; must load VRs in this line
+ lvxl v12,0,r11
+ lvxl v13,r4,r11
+
+vr_ld32test14: ; here to handle next cache line
+ la r11,savevr14(r3) ; get offset to next cache line
+ bt 14,vr_ld32load14 ; skip if we must load this line
+ vor v14,v31,v31 ; neither VR is live, so bug them both
+ vor v15,v31,v31
+ b vr_ld32test16
+vr_ld32load14: ; must load VRs in this line
+ lvxl v14,0,r11
+ lvxl v15,r4,r11
+
+vr_ld32test16: ; here to handle next cache line
+ la r11,savevr16(r3) ; get offset to next cache line
+ bt 16,vr_ld32load16 ; skip if we must load this line
+ vor v16,v31,v31 ; neither VR is live, so bug them both
+ vor v17,v31,v31
+ b vr_ld32test18
+vr_ld32load16: ; must load VRs in this line
+ lvxl v16,0,r11
+ lvxl v17,r4,r11
+
+vr_ld32test18: ; here to handle next cache line
+ la r11,savevr18(r3) ; get offset to next cache line
+ bt 18,vr_ld32load18 ; skip if we must load this line
+ vor v18,v31,v31 ; neither VR is live, so bug them both
+ vor v19,v31,v31
+ b vr_ld32test20
+vr_ld32load18: ; must load VRs in this line
+ lvxl v18,0,r11
+ lvxl v19,r4,r11
+
+vr_ld32test20: ; here to handle next cache line
+ la r11,savevr20(r3) ; get offset to next cache line
+ bt 20,vr_ld32load20 ; skip if we must load this line
+ vor v20,v31,v31 ; neither VR is live, so bug them both
+ vor v21,v31,v31
+ b vr_ld32test22
+vr_ld32load20: ; must load VRs in this line
+ lvxl v20,0,r11
+ lvxl v21,r4,r11
+
+vr_ld32test22: ; here to handle next cache line
+ la r11,savevr22(r3) ; get offset to next cache line
+ bt 22,vr_ld32load22 ; skip if we must load this line
+ vor v22,v31,v31 ; neither VR is live, so bug them both
+ vor v23,v31,v31
+ b vr_ld32test24
+vr_ld32load22: ; must load VRs in this line
+ lvxl v22,0,r11
+ lvxl v23,r4,r11
+
+vr_ld32test24: ; here to handle next cache line
+ la r11,savevr24(r3) ; get offset to next cache line
+ bt 24,vr_ld32load24 ; skip if we must load this line
+ vor v24,v31,v31 ; neither VR is live, so bug them both
+ vor v25,v31,v31
+ b vr_ld32test26
+vr_ld32load24: ; must load VRs in this line
+ lvxl v24,0,r11
+ lvxl v25,r4,r11
+
+vr_ld32test26: ; here to handle next cache line
+ la r11,savevr26(r3) ; get offset to next cache line
+ bt 26,vr_ld32load26 ; skip if we must load this line
+ vor v26,v31,v31 ; neither VR is live, so bug them both
+ vor v27,v31,v31
+ b vr_ld32test28
+vr_ld32load26: ; must load VRs in this line
+ lvxl v26,0,r11
+ lvxl v27,r4,r11
+
+vr_ld32test28: ; here to handle next cache line
+ la r11,savevr28(r3) ; get offset to next cache line
+ bt 28,vr_ld32load28 ; skip if we must load this line
+ vor v28,v31,v31 ; neither VR is live, so bug them both
+ vor v29,v31,v31
+ b vr_ld32test30
+vr_ld32load28: ; must load VRs in this line
+ lvxl v28,0,r11
+ lvxl v29,r4,r11
+
+vr_ld32test30: ; here to handle next cache line
+ la r11,savevr30(r3) ; get offset to next cache line
+ bt 30,vr_ld32load30 ; skip if we must load this line
+ vor v30,v31,v31 ; neither VR is live, so bug them both
+ blr
+vr_ld32load30: ; must load VRs in this line
+ lvxl v30,0,r11
+ lvxl v31,r4,r11
+ blr
projects / apple / xnu.git / blobdiff