xnu-3789.51.2.tar.gz

[apple/xnu.git] / config / MASTER

diff --git a/config/MASTER b/config/MASTER
index d612020b7a8a0358d31249c20430a0b07a01fcad..cdacdd750d1a4827a36c9bf8432409145b76d7e9 100644 (file)
--- a/config/MASTER
+++ b/config/MASTER
@@ -63,6 +63,7 @@ options               MACH_FASTLINK   # Fast symbolic links
 options                MACH_HOST       # Mach host (resource alloc.)   # <host>
 options                MACH_IPC_COMPAT # Enable old IPC interface      # <ipc_compat>
 options                MACH_IPC_TEST   # Testing code/printfs          # <ipc_test>
+options                MACH_FLIPC      # Fast-Local IPC                # <mach_flipc>
 options        MACH_NP         # Mach IPC support              # <np>
 options                MACH_NBC        # No buffer cache               # <nbc>
 options                MACH_NET        # Fast network access           # <mach_net>
@@ -85,13 +86,8 @@ options              MEASURE_BW      # interface bandwidth measurement # <measure_bw>
 options                CLASSQ_BLUE     # BLUE queueing algorithm       # <classq_blue>
 options                CLASSQ_RED      # RED queueing algorithm        # <classq_red>
 options                CLASSQ_RIO      # RIO queueing algorithm        # <classq_rio>
-options                IPDIVERT        # Divert sockets (for NAT)      # <ipdivert>
-options                IPFIREWALL      # IP Firewalling (used by NAT)  # <ipfirewall>
-options                IPFIREWALL_FORWARD      #Transparent proxy      # <ipfirewall>
-options                IPFIREWALL_DEFAULT_TO_ACCEPT    # allow everything by default   # <ipfirewall>
 options                DUMMYNET        # dummynet support              # <dummynet>
 options                TRAFFIC_MGT     # traffic management support            # <traffic_mgt>
-options                IPFW2           # IP firewall (new version)     # <ipfw2>
 options                MULTICAST       # Internet Protocol Class-D     $
 options                TCPDEBUG        # TCP debug                     # <tcpdebug>
 options                TCP_DROP_SYNFIN # Drop TCP packets with SYN+FIN set     # <tcpdrop_synfin>
@@ -107,6 +103,7 @@ options             FLOW_DIVERT                                                             # <flow_divert>
 options                NECP                                                                    # <necp>
 options                CONTENT_FILTER  #                                               # <content_filter>
 options        PACKET_MANGLER  #                                               # <packet_mangler>
+
 # secure_kernel - secure kernel from user programs
 options     SECURE_KERNEL       # <secure_kernel> 
 
@@ -124,25 +121,19 @@ options           NETWORKING      # networking layer              # <inet, inet6>
 options                CONFIG_FSE      # file system events            # <config_fse>
 options                CONFIG_IMAGEBOOT        # local image boot      # <config_imageboot>
 options                CONFIG_MBUF_JUMBO       # jumbo cluster pool    # <config_mbuf_jumbo>
-options                CONFIG_FORCE_OUT_IFP    # Enable IP_FORCE_OUT_IFP # <config_force_out_ifp>
-options                CONFIG_IFEF_NOWINDOWSCALE # Scale TCP window per driver # <config_ifef_nowindowscale>
 
 options                CONFIG_WORKQUEUE        # <config_workqueue>
 
 #
 #      4.4 filesystems 
 #
-options                HFS             # HFS/HFS+ support              # <hfs>
 options                MOCKFS          # Boot from an executable       # <mockfs>
 options                FIFO            # fifo support                  # <fifo>
 options                FDESC           # fdesc_fs support              # <fdesc>
 options                DEVFS           # devfs support                 # <devfs>
-options                JOURNALING      # journaling support            # <journaling>
-options                HFS_COMPRESSION # hfs compression           # <hfs_compression>
-options                CONFIG_HFS_STD  # hfs standard support      # <config_hfs_std>
-options                CONFIG_HFS_TRIM # hfs trims unused blocks   # <config_hfs_trim>
-options                CONFIG_HFS_MOUNT_UNMAP  # hfs trims blocks at mount # <config_hfs_mount_unmap>
-options                CONFIG_HFS_DIRLINK      # allow directory hardlink creation # <config_hfs_dirlink>
+options                ROUTEFS         # routefs support               # <routefs>
+options                NULLFS          # nullfs support                # <nullfs>
+options                FS_COMPRESSION  # fs compression            # <fs_compression>
 options                CONFIG_DEV_KMEM     # /dev/kmem device for reading KVA  # <config_dev_kmem>
 
 #
@@ -156,7 +147,7 @@ options             CONFIG_IMGSRC_ACCESS # source of imageboot dmg  # <config_imgsrc_access>
 options                CONFIG_TRIGGERS # trigger vnodes                # <config_triggers>
 options                CONFIG_EXT_RESOLVER # e.g. memberd              # <config_ext_resolver>
 options                CONFIG_SEARCHFS # searchfs syscall support      # <config_searchfs>
-options                CONFIG_SECLUDED_RENAME # secluded rename syscall # <config_secluded_rename>
+options                CONFIG_MNT_SUID # allow suid binaries  # <config_mnt_suid>
 
 #
 # NFS support
@@ -313,6 +304,7 @@ options   CONFIG_MSG_BSIZE=16384            # <medium,large,xlarge>
 options   CONFIG_IPC_TABLE_ENTRIES_STEPS=64    # 137898 entries        # <bsmall,small,xsmall>
 options   CONFIG_IPC_TABLE_ENTRIES_STEPS=256   # 300714 entries        # <medium,large,xlarge>
 
+
 #
 #  configurable kernel - use these options to strip strings from panic
 #  and printf calls.
@@ -357,6 +349,13 @@ options            CONFIG_MEMORYSTATUS             # <memorystatus>
 #
 options                CONFIG_JETSAM                   # <jetsam>
 
+#
+# enable new link table implementation stats/debugging
+# (adds mesaureable overhead)
+#
+options                CONFIG_LTABLE_STATS                     # <config_ltable_stats>
+options                CONFIG_LTABLE_DEBUG                     # <config_ltable_debug>
+
 #
 # enable new wait queue implementation stats / debugging
 #
@@ -381,11 +380,20 @@ options           CONFIG_PHANTOM_CACHE            # <phantom_cache>
 #
 options                VM_PRESSURE_EVENTS              # <vm_pressure_events>
 
+options                CONFIG_SECLUDED_MEMORY          # <config_secluded_memory>
+
+options                CONFIG_BACKGROUND_QUEUE         # <config_background_queue>
+
 #
 # I/O Scheduling
 #
 options                CONFIG_IOSCHED                  # <config_iosched>
 
+#
+# Accounting for I/O usage
+#
+options        CONFIG_IO_ACCOUNTING            # <config_io_accounting>
+
 #
 # Enable inheritance of importance through specially marked mach ports and for file locks
 # For now debug is enabled wherever inheritance is
@@ -402,6 +410,11 @@ options            CONFIG_PROC_UUID_POLICY         # <config_proc_uuid_policy>
 # 
 options                CONFIG_ECC_LOGGING              # <config_ecc_logging>
 
+#
+# Application core dumps
+#
+options                CONFIG_COREDUMP                 # <config_coredump>
+
 #
 #  Ethernet (ARP)
 #
@@ -486,6 +499,12 @@ options         CONFIG_STATIC_CPPINIT   # Static library initializes kext cpp ru
 #
 options                CONFIG_KEXT_BASEMENT            #       # <config_kext_basement>
 
+#
+# Persona Management
+#
+options                CONFIG_PERSONAS     # Persona management    # <config_personas>
+options                PERSONA_DEBUG       # Persona debugging     # <persona_debug>
+
 #
 # security configuration options
 #
@@ -506,7 +525,6 @@ options             CONFIG_AUDIT        # Kernel auditing       # <config_audit>
 #      forcibly suspending tasks when the demand exceeds supply. This
 #      option should be on.
 #
-options                MACH_PAGEMAP    #       <mach_pagemap>
 options                MACH_RT
 options                TASK_SWAPPER    #       <task_swapper_disabled>
 
@@ -546,10 +564,6 @@ options            ZONE_DEBUG      #               # <debug>
 
 options                CONFIG_ZLEAKS   # Live zone leak debugging      # <zleaks>
 
-#
-options                ZONE_ALIAS_ADDR #               # <zone_alias_addr>
-
-
 #
 # CONFIG_TASK_ZONE_INFO allows per-task zone information to be extracted
 # Primarily useful for xnu debug and development.
@@ -593,6 +607,8 @@ options             CONFIG_DTRACE           #                   # <config_dtrace>
 options     KPERF                  # <kperf>
 options     KPC                    # <kpc>
 
+options     PGO                    # <pgo>
+
 # MACH_COUNTERS enables code that handles various counters in the system.
 # 
 options                MACH_COUNTERS   #                           # <debug>
@@ -690,6 +706,11 @@ options            CONFIG_XNUPOST                          # <config_xnupost>
 #
 options PROC_REF_DEBUG                                 # <proc_ref_debug>
 
+#
+# Kernel OS reason debug instrumentation
+#
+options OS_REASON_DEBUG                                        # <os_reason_debug>
+
 #
 # Kernel Voucher Attr Manager for Activity Trace
 #