/*
- * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
+ * Copyright (c) 2000-2006 Apple Computer, Inc. All rights reserved.
*
- * @APPLE_LICENSE_HEADER_START@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
- * The contents of this file constitute Original Code as defined in and
- * are subject to the Apple Public Source License Version 1.1 (the
- * "License"). You may not use this file except in compliance with the
- * License. Please obtain a copy of the License at
- * http://www.apple.com/publicsource and read it before using this file.
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
*
- * This Original Code and all software distributed under the License are
- * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ *
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
* INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the
- * License for the specific language governing rights and limitations
- * under the License.
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
+ * limitations under the License.
*
- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
/*
* @OSF_COPYRIGHT@
#include <i386/asm.h>
#include <assym.s>
#include <mach_kdb.h>
+#include <i386/eflags.h>
+#include <i386/trap.h>
+
+#define HI_DATA(lo_addr) ( (EXT(lo_addr) - EXT(hi_remap_data)) + HIGH_IDT_BASE )
+#define HI_TEXT(lo_text) ( (EXT(lo_text) - EXT(hi_remap_text)) + HIGH_MEM_BASE )
/*
* Interrupt descriptor table and code vectors for it.
*/
#define IDT_BASE_ENTRY(vec,seg,type) \
.data ;\
- .long vec ;\
+ .long EXT(vec) - EXT(hi_remap_text) + HIGH_MEM_BASE ; \
+ .word seg ;\
+ .byte 0 ;\
+ .byte type ;\
+ .text
+
+#define IDT_BASE_ENTRY_INT(vec,seg,type) \
+ .data ;\
+ .long vec - EXT(hi_remap_text) + HIGH_MEM_BASE ; \
+ .word seg ;\
+ .byte 0 ;\
+ .byte type ;\
+ .text
+
+#define IDT_BASE_ENTRY_TG(vec,seg,type) \
+ .data ;\
+ .long 0 ; \
.word seg ;\
.byte 0 ;\
.byte type ;\
.text
#define IDT_ENTRY(vec,type) IDT_BASE_ENTRY(vec,KERNEL_CS,type)
+#define IDT_ENTRY_INT(vec,type) IDT_BASE_ENTRY_INT(vec,KERNEL_CS,type)
/*
* No error code. Clear error code and push trap number.
*/
#define EXCEPTION(n,name) \
- IDT_ENTRY(EXT(name),K_TRAP_GATE);\
+ IDT_ENTRY(name,K_INTR_GATE);\
Entry(name) ;\
pushl $0 ;\
pushl $(n) ;\
- jmp EXT(alltraps)
+ pusha ;\
+ movl $ EXT(lo_alltraps),%ebx ;\
+ jmp enter_lohandler
+
/*
* Interrupt from user. Clear error code and push trap number.
*/
#define EXCEP_USR(n,name) \
- IDT_ENTRY(EXT(name),U_TRAP_GATE);\
+ IDT_ENTRY(name,U_INTR_GATE);\
Entry(name) ;\
pushl $0 ;\
pushl $(n) ;\
- jmp EXT(alltraps)
+ pusha ;\
+ movl $ EXT(lo_alltraps),%ebx ;\
+ jmp enter_lohandler
+
/*
* Special interrupt code.
*/
#define EXCEP_SPC(n,name) \
- IDT_ENTRY(EXT(name),K_TRAP_GATE)
-
+ IDT_ENTRY(name,K_INTR_GATE)
+
/*
* Special interrupt code from user.
*/
#define EXCEP_SPC_USR(n,name) \
- IDT_ENTRY(EXT(name),U_TRAP_GATE)
+ IDT_ENTRY(name,U_INTR_GATE)
+
/*
* Extra-special interrupt code. Note that no offset may be
* specified in a task gate descriptor, so name is ignored.
*/
#define EXCEP_TASK(n,name) \
- IDT_BASE_ENTRY(0,DEBUG_TSS,K_TASK_GATE)
+ IDT_BASE_ENTRY_TG(0,DEBUG_TSS,K_TASK_GATE)
+
+/* Double-fault fatal handler */
+#define DF_FATAL_TASK(n,name) \
+ IDT_BASE_ENTRY_TG(0,DF_TSS,K_TASK_GATE)
+
+/* machine-check handler */
+#define MC_FATAL_TASK(n,name) \
+ IDT_BASE_ENTRY_TG(0,MC_TSS,K_TASK_GATE)
/*
* Error code has been pushed. Push trap number.
*/
#define EXCEP_ERR(n,name) \
- IDT_ENTRY(EXT(name),K_TRAP_GATE);\
+ IDT_ENTRY(name,K_INTR_GATE);\
Entry(name) ;\
pushl $(n) ;\
- jmp EXT(alltraps)
+ pusha ;\
+ movl $ EXT(lo_alltraps),%ebx ;\
+ jmp enter_lohandler
+
/*
* Interrupt.
*/
#define INTERRUPT(n) \
- IDT_ENTRY(0f,K_INTR_GATE) ;\
-0: ;\
- pushl %eax ;\
- movl $(n),%eax ;\
- jmp EXT(all_intrs)
+ IDT_ENTRY_INT(L_ ## n,K_INTR_GATE) ;\
+ .align FALIGN ;\
+L_ ## n: ;\
+ pushl $0 ;\
+ pushl $(n) ;\
+ pusha ;\
+ movl $ EXT(lo_allintrs),%ebx ;\
+ jmp enter_lohandler
+
.data
-Entry(idt)
+ .align 12
+Entry(master_idt)
+Entry(hi_remap_data)
.text
+Entry(hi_remap_text)
EXCEPTION(0x00,t_zero_div)
-EXCEP_SPC(0x01,t_debug)
+EXCEP_SPC(0x01,hi_debug)
INTERRUPT(0x02) /* NMI */
EXCEP_USR(0x03,t_int3)
EXCEP_USR(0x04,t_into)
#if MACH_KDB
EXCEP_TASK(0x08,db_task_dbl_fault)
#else
-EXCEPTION(0x08,a_dbl_fault)
+DF_FATAL_TASK(0x08,df_task_start)
#endif
EXCEPTION(0x09,a_fpu_over)
EXCEPTION(0x0a,a_inv_tss)
-EXCEP_SPC(0x0b,t_segnp)
+EXCEP_SPC(0x0b,hi_segnp)
#if MACH_KDB
EXCEP_TASK(0x0c,db_task_stk_fault)
#else
EXCEP_ERR(0x0c,t_stack_fault)
#endif
-EXCEP_SPC(0x0d,t_gen_prot)
-EXCEP_SPC(0x0e,t_page_fault)
+EXCEP_SPC(0x0d,hi_gen_prot)
+EXCEP_SPC(0x0e,hi_page_fault)
EXCEPTION(0x0f,t_trap_0f)
EXCEPTION(0x10,t_fpu_err)
EXCEPTION(0x11,t_trap_11)
-EXCEPTION(0x12,t_trap_12)
-EXCEPTION(0x13,t_trap_13)
+MC_FATAL_TASK(0x12,mc_task_start)
+EXCEPTION(0x13,t_sse_err)
EXCEPTION(0x14,t_trap_14)
EXCEPTION(0x15,t_trap_15)
EXCEPTION(0x16,t_trap_16)
INTERRUPT(0x7c)
INTERRUPT(0x7d)
INTERRUPT(0x7e)
-INTERRUPT(0x7f)
+EXCEP_USR(0x7f, t_dtrace_ret)
+
+EXCEP_SPC_USR(0x80,hi_unix_scall)
+EXCEP_SPC_USR(0x81,hi_mach_scall)
+EXCEP_SPC_USR(0x82,hi_mdep_scall)
+EXCEP_SPC_USR(0x83,hi_diag_scall)
-EXCEP_SPC_USR(0x80,syscall_int80)
-INTERRUPT(0x81)
-INTERRUPT(0x82)
-INTERRUPT(0x83)
INTERRUPT(0x84)
INTERRUPT(0x85)
INTERRUPT(0x86)
INTERRUPT(0xfe)
EXCEPTION(0xff,t_preempt)
+
+ .data
+Entry(lo_kernel_cr3)
+ .long 0
+ .long 0
+
+ .text
+
+
+/*******************************************************************************************************
+ *
+ * Trap/interrupt entry points.
+ *
+ * All traps must create the following save area on the PCB "stack":
+ *
+ * gs
+ * fs
+ * es
+ * ds
+ * edi
+ * esi
+ * ebp
+ * cr2 if page fault - otherwise unused
+ * ebx
+ * edx
+ * ecx
+ * eax
+ * trap number
+ * error code
+ * eip
+ * cs
+ * eflags
+ * user esp - if from user
+ * user ss - if from user
+ */
+
+
+Entry(hi_ret_to_user)
+ movl %esp,%ebx
+ movl %gs:CPU_ACTIVE_THREAD,%ecx
+ subl ACT_PCB_ISS(%ecx),%ebx
+ movl $(WINDOWS_CLEAN),ACT_COPYIO_STATE(%ecx)
+
+ movl ACT_PCB_IDS(%ecx),%eax /* get debug state struct */
+ cmpl $0,%eax /* is there a debug state */
+ je 1f /* branch if not */
+ movl DS_DR0(%eax), %ecx /* Load the 32 bit debug registers */
+ movl %ecx, %db0
+ movl DS_DR1(%eax), %ecx
+ movl %ecx, %db1
+ movl DS_DR2(%eax), %ecx
+ movl %ecx, %db2
+ movl DS_DR3(%eax), %ecx
+ movl %ecx, %db3
+ movl DS_DR7(%eax), %eax
+1:
+ addl %gs:CPU_HI_ISS,%ebx /* rebase PCB save area to high addr */
+ movl %gs:CPU_TASK_CR3,%ecx
+ movl %ecx,%gs:CPU_ACTIVE_CR3
+ movl %ebx,%esp /* switch to hi based PCB stack */
+ movl %ecx,%cr3 /* switch to user's address space */
+
+ cmpl $0,%eax /* is dr7 set to something? */
+ je 2f /* branch if not */
+ movl %eax,%db7 /* Set dr7 */
+2:
+
+Entry(hi_ret_to_kernel)
+
+ popl %eax /* ignore flavor of saved state */
+EXT(ret_popl_gs):
+ popl %gs /* restore segment registers */
+EXT(ret_popl_fs):
+ popl %fs
+EXT(ret_popl_es):
+ popl %es
+EXT(ret_popl_ds):
+ popl %ds
+
+ popa /* restore general registers */
+ addl $8,%esp /* discard trap number and error code */
+
+ cmpl $(SYSENTER_CS),4(%esp) /* test for fast entry/exit */
+ je fast_exit
+EXT(ret_iret):
+ iret /* return from interrupt */
+fast_exit:
+ popl %edx /* user return eip */
+ popl %ecx /* pop and toss cs */
+ andl $(~EFL_IF),(%esp) /* clear intrs enabled, see sti below */
+ popf /* flags - carry denotes failure */
+ popl %ecx /* user return esp */
+ sti /* interrupts enabled after sysexit */
+ sysexit
+
+
+Entry(hi_unix_scall)
+ pushl %eax /* save system call number */
+ pushl $0 /* clear trap number slot */
+ pusha /* save the general registers */
+ movl $ EXT(lo_unix_scall),%ebx
+ jmp enter_lohandler
+
+
+Entry(hi_mach_scall)
+ pushl %eax /* save system call number */
+ pushl $0 /* clear trap number slot */
+ pusha /* save the general registers */
+ movl $ EXT(lo_mach_scall),%ebx
+ jmp enter_lohandler
+
+
+Entry(hi_mdep_scall)
+ pushl %eax /* save system call number */
+ pushl $0 /* clear trap number slot */
+ pusha /* save the general registers */
+ movl $ EXT(lo_mdep_scall),%ebx
+ jmp enter_lohandler
+
+
+Entry(hi_diag_scall)
+ pushl %eax // Save sselector
+ pushl $0 // Clear trap number slot
+ pusha // save the general registers
+ movl $EXT(lo_diag_scall),%ebx // Get the function down low to transfer to
+ jmp enter_lohandler // Leap to it...
+
+
+/*
+ * sysenter entry point
+ * Requires user code to set up:
+ * edx: user instruction pointer (return address)
+ * ecx: user stack pointer
+ * on which is pushed stub ret addr and saved ebx
+ * Return to user-space is made using sysexit.
+ * Note: sysenter/sysexit cannot be used for calls returning a value in edx,
+ * or requiring ecx to be preserved.
+ */
+Entry(hi_sysenter)
+ movl (%esp), %esp /* switch from intr stack to pcb */
+ /*
+ * Push values on to the PCB stack
+ * to cons up the saved state.
+ */
+ pushl $(USER_DS) /* ss */
+ pushl %ecx /* uesp */
+ pushf /* flags */
+ /*
+ * Clear, among others, the Nested Task (NT) flags bit;
+ * This is cleared by INT, but not by SYSENTER.
+ */
+ pushl $0
+ popfl
+ pushl $(SYSENTER_CS) /* cs */
+hi_sysenter_2:
+ pushl %edx /* eip */
+ pushl %eax /* err/eax - syscall code */
+ pushl $0 /* clear trap number slot */
+ pusha /* save the general registers */
+ orl $(EFL_IF),R_EFLAGS-R_EDI(%esp) /* (edi was last reg pushed) */
+ movl $ EXT(lo_sysenter),%ebx
+enter_lohandler:
+ pushl %ds
+ pushl %es
+ pushl %fs
+ pushl %gs
+ pushl $(SS_32) /* 32-bit state flavor */
+enter_lohandler1:
+ mov %ss,%eax
+ mov %eax,%ds
+ mov %eax,%fs
+ mov %eax,%es /* switch to kernel data seg */
+ mov $(CPU_DATA_GS),%eax
+ mov %eax,%gs
+ cld /* clear direction flag */
+ /*
+ * Switch to kernel's address space if necessary
+ */
+ movl HI_DATA(lo_kernel_cr3),%ecx
+ movl %cr3,%eax
+ cmpl %eax,%ecx
+ je 1f
+ movl %ecx,%cr3
+ movl %ecx,%gs:CPU_ACTIVE_CR3
+1:
+ testb $3,R_CS(%esp)
+ jz 2f
+ movl %esp,%edx /* came from user mode */
+ subl %gs:CPU_HI_ISS,%edx
+ movl %gs:CPU_ACTIVE_THREAD,%ecx
+ addl ACT_PCB_ISS(%ecx),%edx /* rebase the high stack to a low address */
+ movl %edx,%esp
+ cmpl $0, ACT_PCB_IDS(%ecx) /* Is there a debug register state? */
+ je 2f
+ movl $0, %ecx /* If so, reset DR7 (the control) */
+ movl %ecx, %dr7
+2:
+ movl R_TRAPNO(%esp),%ecx // Get the interrupt vector
+ addl $1,%gs:hwIntCnt(,%ecx,4) // Bump the count
+ jmp *%ebx
+
+
+/*
+ * Page fault traps save cr2.
+ */
+Entry(hi_page_fault)
+ pushl $(T_PAGE_FAULT) /* mark a page fault trap */
+ pusha /* save the general registers */
+ movl %cr2,%eax /* get the faulting address */
+ movl %eax,R_CR2-R_EDI(%esp) /* save in esp save slot */
+
+ movl $ EXT(lo_alltraps),%ebx
+ jmp enter_lohandler
+
+
+
+/*
+ * Debug trap. Check for single-stepping across system call into
+ * kernel. If this is the case, taking the debug trap has turned
+ * off single-stepping - save the flags register with the trace
+ * bit set.
+ */
+Entry(hi_debug)
+ testb $3,4(%esp)
+ jnz hi_debug_trap
+ /* trap came from kernel mode */
+ cmpl $(HI_TEXT(hi_mach_scall)),(%esp)
+ jne 6f
+ addl $12,%esp /* remove eip/cs/eflags from debug_trap */
+ jmp EXT(hi_mach_scall) /* continue system call entry */
+6:
+ cmpl $(HI_TEXT(hi_mdep_scall)),(%esp)
+ jne 5f
+ addl $12,%esp /* remove eip/cs/eflags from debug_trap */
+ jmp EXT(hi_mdep_scall) /* continue system call entry */
+5:
+ cmpl $(HI_TEXT(hi_unix_scall)),(%esp)
+ jne 4f
+ addl $12,%esp /* remove eip/cs/eflags from debug_trap */
+ jmp EXT(hi_unix_scall) /* continue system call entry */
+4:
+ cmpl $(HI_TEXT(hi_sysenter)),(%esp)
+ jne hi_debug_trap
+ /*
+ * eip/cs/flags have been pushed on intr stack
+ * We have to switch to pcb stack and copy eflags.
+ * Note: setting the cs selector to SYSENTER_TF_CS
+ * will cause the return to user path to take the iret path so
+ * that eflags (containing the trap bit) is set atomically.
+ * In unix_syscall this is tested so that we'll rewind the pc
+ * to account for with sysenter or int entry.
+ */
+ addl $8,%esp /* remove eip/cs */
+ pushl %ecx /* save %ecx */
+ movl 8(%esp),%ecx /* top of intr stack -> pcb stack */
+ xchgl %ecx,%esp /* switch to pcb stack */
+ pushl $(USER_DS) /* ss */
+ pushl %ss:(%ecx) /* %ecx into uesp slot */
+ pushl %ss:4(%ecx) /* eflags */
+ movl %ss:(%ecx),%ecx /* restore %ecx */
+ pushl $(SYSENTER_TF_CS) /* cs - not SYSENTER_CS for iret path */
+ jmp hi_sysenter_2 /* continue sysenter entry */
+hi_debug_trap:
+ pushl $0
+ pushl $(T_DEBUG) /* handle as user trap */
+ pusha /* save the general registers */
+ movl $ EXT(lo_alltraps),%ebx
+ jmp enter_lohandler
+
+
+
+/*
+ * General protection or segment-not-present fault.
+ * Check for a GP/NP fault in the kernel_return
+ * sequence; if there, report it as a GP/NP fault on the user's instruction.
+ *
+ * esp-> 0: trap code (NP or GP)
+ * 4: segment number in error
+ * 8 eip
+ * 12 cs
+ * 16 eflags
+ * 20 old registers (trap is from kernel)
+ */
+Entry(hi_gen_prot)
+ pushl $(T_GENERAL_PROTECTION) /* indicate fault type */
+ jmp trap_check_kernel_exit /* check for kernel exit sequence */
+
+Entry(hi_segnp)
+ pushl $(T_SEGMENT_NOT_PRESENT)
+ /* indicate fault type */
+trap_check_kernel_exit:
+ testb $3,12(%esp)
+ jnz hi_take_trap
+ /* trap was from kernel mode, so */
+ /* check for the kernel exit sequence */
+ cmpl $(HI_TEXT(ret_iret)),8(%esp) /* on IRET? */
+ je fault_iret
+ cmpl $(HI_TEXT(ret_popl_ds)),8(%esp) /* popping DS? */
+ je fault_popl_ds
+ cmpl $(HI_TEXT(ret_popl_es)),8(%esp) /* popping ES? */
+ je fault_popl_es
+ cmpl $(HI_TEXT(ret_popl_fs)),8(%esp) /* popping FS? */
+ je fault_popl_fs
+ cmpl $(HI_TEXT(ret_popl_gs)),8(%esp) /* popping GS? */
+ je fault_popl_gs
+hi_take_trap:
+ pusha /* save the general registers */
+ movl $ EXT(lo_alltraps),%ebx
+ jmp enter_lohandler
+
+
+/*
+ * GP/NP fault on IRET: CS or SS is in error.
+ * All registers contain the user's values.
+ *
+ * on SP is
+ * 0 trap number
+ * 4 errcode
+ * 8 eip
+ * 12 cs --> trapno
+ * 16 efl --> errcode
+ * 20 user eip
+ * 24 user cs
+ * 28 user eflags
+ * 32 user esp
+ * 36 user ss
+ */
+fault_iret:
+ movl %eax,8(%esp) /* save eax (we don`t need saved eip) */
+ popl %eax /* get trap number */
+ movl %eax,12-4(%esp) /* put in user trap number */
+ popl %eax /* get error code */
+ movl %eax,16-8(%esp) /* put in user errcode */
+ popl %eax /* restore eax */
+ /* now treat as fault from user */
+ pusha /* save the general registers */
+ movl $ EXT(lo_alltraps),%ebx
+ jmp enter_lohandler
+
+/*
+ * Fault restoring a segment register. The user's registers are still
+ * saved on the stack. The offending segment register has not been
+ * popped.
+ */
+fault_popl_ds:
+ popl %eax /* get trap number */
+ popl %edx /* get error code */
+ addl $12,%esp /* pop stack to user regs */
+ jmp push_es /* (DS on top of stack) */
+fault_popl_es:
+ popl %eax /* get trap number */
+ popl %edx /* get error code */
+ addl $12,%esp /* pop stack to user regs */
+ jmp push_fs /* (ES on top of stack) */
+fault_popl_fs:
+ popl %eax /* get trap number */
+ popl %edx /* get error code */
+ addl $12,%esp /* pop stack to user regs */
+ jmp push_gs /* (FS on top of stack) */
+fault_popl_gs:
+ popl %eax /* get trap number */
+ popl %edx /* get error code */
+ addl $12,%esp /* pop stack to user regs */
+ jmp push_none /* (GS on top of stack) */
+
+push_es:
+ pushl %es /* restore es, */
+push_fs:
+ pushl %fs /* restore fs, */
+push_gs:
+ pushl %gs /* restore gs. */
+push_none:
+ pushl $(SS_32) /* 32-bit state flavor */
+ movl %eax,R_TRAPNO(%esp) /* set trap number */
+ movl %edx,R_ERR(%esp) /* set error code */
+ /* now treat as fault from user */
+ /* except that segment registers are */
+ /* already pushed */
+ movl $ EXT(lo_alltraps),%ebx
+ jmp enter_lohandler1
+
+
+ .text
+
+
+Entry(lo_ret_to_user)
+ jmp *1f
+1: .long HI_TEXT(hi_ret_to_user)
+
+Entry(lo_ret_to_kernel)
+ jmp *1f
+1: .long HI_TEXT(hi_ret_to_kernel)
+
+Entry(hi_remap_etext)
projects / apple / xnu.git / blobdiff