/*
- * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved.
+ * Copyright (c) 1999-2010 Apple Inc. All Rights Reserved.
*
- * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
+ * @APPLE_LICENSE_HEADER_START@
*
* This file contains Original Code and/or Modifications of Original Code
* as defined in and that are subject to the Apple Public Source License
* Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. The rights granted to you under the License
- * may not be used to create, or enable the creation or redistribution of,
- * unlawful or unlicensed copies of an Apple operating system, or to
- * circumvent, violate, or enable the circumvention or violation of, any
- * terms of an Apple operating system software license agreement.
- *
- * Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ * compliance with the License. Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this
+ * file.
*
* The Original Code and all software distributed under the License are
* distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* Please see the License for the specific language governing rights and
* limitations under the License.
*
- * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
+ * @APPLE_LICENSE_HEADER_END@
*/
#ifndef _MACHO_LOADER_H_
#define _MACHO_LOADER_H_
* states and the structures of those flavors for each machine.
*/
#include <mach/machine/thread_status.h>
-#ifndef KERNEL
#include <architecture/byte_order.h>
-#endif /* KERNEL */
/*
* The 32-bit mach header appears at the very beginning of the object file for
/* linking only, no section contents */
#define MH_DSYM 0xa /* companion file with only debug */
/* sections */
+#define MH_KEXT_BUNDLE 0xb /* x86_64 kexts */
/* Constants for the flags field of the mach_header */
#define MH_NOUNDEFS 0x1 /* the object file has no undefined
the static linker does not need to
examine dependent dylibs to see
if any are re-exported */
+#define MH_PIE 0x200000 /* When this bit is set, the OS will
+ load the main executable at a
+ random address. Only used in
+ MH_EXECUTE filetypes. */
+#define MH_DEAD_STRIPPABLE_DYLIB 0x400000 /* Only for use on dylibs. When
+ linking against a dylib that
+ has this bit set, the static linker
+ will automatically not create a
+ LC_LOAD_DYLIB load command to the
+ dylib if no symbols are being
+ referenced from the dylib. */
+#define MH_HAS_TLV_DESCRIPTORS 0x800000 /* Contains a section of type
+ S_THREAD_LOCAL_VARIABLES */
+
+#define MH_NO_HEAP_EXECUTION 0x1000000 /* When this bit is set, the OS will
+ run the main executable with
+ a non-executable heap even on
+ platforms (e.g. i386) that don't
+ require it. Only used in MH_EXECUTE
+ filetypes. */
+
+#define MH_APP_EXTENSION_SAFE 0x02000000 /* The code was linked for use in an
+ application extension. */
+
+#define MH_NLIST_OUTOFSYNC_WITH_DYLDINFO 0x04000000 /* The external symbols
+ listed in the nlist symbol table do
+ not include all the symbols listed in
+ the dyld info. */
+
+#define MH_SIM_SUPPORT 0x08000000 /* Allow LC_MIN_VERSION_MACOS and
+ LC_BUILD_VERSION load commands with
+ the platforms macOS, iOSMac,
+ iOSSimulator, tvOSSimulator and
+ watchOSSimulator. */
+
+#define MH_DYLIB_IN_CACHE 0x80000000 /* Only for use on dylibs. When this bit
+ is set, the dylib is part of the dyld
+ shared cache, rather than loose in
+ the filesystem. */
/*
* The load commands directly follow the mach_header. The total size of all
#define LC_CODE_SIGNATURE 0x1d /* local of code signature */
#define LC_SEGMENT_SPLIT_INFO 0x1e /* local of info to split segments */
#define LC_REEXPORT_DYLIB (0x1f | LC_REQ_DYLD) /* load and re-export dylib */
+#define LC_LAZY_LOAD_DYLIB 0x20 /* delay load of dylib until first use */
+#define LC_ENCRYPTION_INFO 0x21 /* encrypted segment information */
+#define LC_DYLD_INFO 0x22 /* compressed dyld information */
+#define LC_DYLD_INFO_ONLY (0x22|LC_REQ_DYLD) /* compressed dyld information only */
+#define LC_LOAD_UPWARD_DYLIB (0x23 | LC_REQ_DYLD) /* load upward dylib */
+#define LC_VERSION_MIN_MACOSX 0x24 /* build for MacOSX min OS version */
+#define LC_VERSION_MIN_IPHONEOS 0x25 /* build for iPhoneOS min OS version */
+#define LC_FUNCTION_STARTS 0x26 /* compressed table of function start addresses */
+#define LC_DYLD_ENVIRONMENT 0x27 /* string for dyld to treat
+ like environment variable */
+#define LC_MAIN (0x28|LC_REQ_DYLD) /* replacement for LC_UNIXTHREAD */
+#define LC_DATA_IN_CODE 0x29 /* table of non-instructions in __text */
+#define LC_SOURCE_VERSION 0x2A /* source version used to build binary */
+#define LC_DYLIB_CODE_SIGN_DRS 0x2B /* Code signing DRs copied from linked dylibs */
+#define LC_ENCRYPTION_INFO_64 0x2C /* 64-bit encrypted segment information */
+#define LC_LINKER_OPTION 0x2D /* linker options in MH_OBJECT files */
+#define LC_LINKER_OPTIMIZATION_HINT 0x2E /* optimization hints in MH_OBJECT files */
+#define LC_VERSION_MIN_TVOS 0x2F /* build for AppleTV min OS version */
+#define LC_VERSION_MIN_WATCHOS 0x30 /* build for Watch min OS version */
+#define LC_NOTE 0x31 /* arbitrary data included within a Mach-O file */
+#define LC_BUILD_VERSION 0x32 /* build for platform min OS version */
+#define LC_DYLD_EXPORTS_TRIE (0x33 | LC_REQ_DYLD) /* used with linkedit_data_command, payload is trie */
+#define LC_DYLD_CHAINED_FIXUPS (0x34 | LC_REQ_DYLD) /* used with linkedit_data_command */
/*
* A variable length string in a load command is represented by an lc_str
first page of the segment is not
protected. All other pages of the
segment are protected. */
+#define SG_READ_ONLY 0x10 /* This segment is made read-only after fixups */
+
+
/*
* A segment is made up of zero or more sections. Non-MH_OBJECT files have
#define S_INTERPOSING 0xd /* section with only pairs of
function pointers for
interposing */
-#define S_16BYTE_LITERALS 0xe /* section with only 16 byte literals */
+#define S_16BYTE_LITERALS 0xe /* section with only 16 byte
+ literals */
+#define S_DTRACE_DOF 0xf /* section contains
+ DTrace Object Format */
+#define S_LAZY_DYLIB_SYMBOL_POINTERS 0x10 /* section with only lazy
+ symbol pointers to lazy
+ loaded dylibs */
+/*
+ * Section types to support thread local variables
+ */
+#define S_THREAD_LOCAL_REGULAR 0x11 /* template of initial
+ values for TLVs */
+#define S_THREAD_LOCAL_ZEROFILL 0x12 /* template of initial
+ values for TLVs */
+#define S_THREAD_LOCAL_VARIABLES 0x13 /* TLV descriptors */
+#define S_THREAD_LOCAL_VARIABLE_POINTERS 0x14 /* pointers to TLV
+ descriptors */
+#define S_THREAD_LOCAL_INIT_FUNCTION_POINTERS 0x15 /* functions to call
+ to initialize TLV
+ values */
+#define S_INIT_FUNC_OFFSETS 0x16 /* 32-bit offsets to
+ initializers */
+
/*
* Constants for the section attributes part of the flags field of a section
* structure.
* the name of the dynamic linker (LC_LOAD_DYLINKER). And a dynamic linker
* contains a dylinker_command to identify the dynamic linker (LC_ID_DYLINKER).
* A file can have at most one of these.
+ * This struct is also used for the LC_DYLD_ENVIRONMENT load command and
+ * contains string for dyld to treat like environment variable.
*/
struct dylinker_command {
- uint32_t cmd; /* LC_ID_DYLINKER or LC_LOAD_DYLINKER */
+ uint32_t cmd; /* LC_ID_DYLINKER, LC_LOAD_DYLINKER or
+ LC_DYLD_ENVIRONMENT */
uint32_t cmdsize; /* includes pathname string */
union lc_str name; /* dynamic linker's path name */
};
* Thread commands contain machine-specific data structures suitable for
* use in the thread state primitives. The machine specific data structures
* follow the struct thread_command as follows.
- * Each flavor of machine specific data structure is preceded by an unsigned
- * long constant for the flavor of that data structure, an uint32_t
- * that is the count of longs of the size of the state data structure and then
+ * Each flavor of machine specific data structure is preceded by an uint32_t
+ * constant for the flavor of that data structure, an uint32_t that is the
+ * count of uint32_t's of the size of the state data structure and then
* the state data structure follows. This triple may be repeated for many
* flavors. The constants for the flavors, counts and state data structure
* definitions are expected to be in the header file <machine/thread_status.h>.
* These machine specific data structures sizes must be multiples of
- * 4 bytes The cmdsize reflects the total size of the thread_command
+ * 4 bytes. The cmdsize reflects the total size of the thread_command
* and all of the sizes of the constants for the flavors, counts and state
* data structures.
*
uint32_t cmd; /* LC_THREAD or LC_UNIXTHREAD */
uint32_t cmdsize; /* total size of this command */
/* uint32_t flavor flavor of thread state */
- /* uint32_t count count of longs in thread state */
+ /* uint32_t count count of uint32_t's in thread state */
/* struct XXX_thread_state state thread state for this flavor */
/* ... */
};
* of data in the __LINKEDIT segment.
*/
struct linkedit_data_command {
- uint32_t cmd; /* LC_CODE_SIGNATURE or LC_SEGMENT_SPLIT_INFO */
+ uint32_t cmd; /* LC_CODE_SIGNATURE, LC_SEGMENT_SPLIT_INFO,
+ LC_FUNCTION_STARTS, LC_DATA_IN_CODE,
+ LC_DYLIB_CODE_SIGN_DRS,
+ LC_LINKER_OPTIMIZATION_HINT,
+ LC_DYLD_EXPORTS_TRIE, or
+ LC_DYLD_CHAINED_FIXUPS. */
uint32_t cmdsize; /* sizeof(struct linkedit_data_command) */
uint32_t dataoff; /* file offset of data in __LINKEDIT segment */
uint32_t datasize; /* file size of data in __LINKEDIT segment */
};
+/*
+ * The encryption_info_command contains the file offset and size of an
+ * of an encrypted segment.
+ */
+struct encryption_info_command {
+ uint32_t cmd; /* LC_ENCRYPTION_INFO */
+ uint32_t cmdsize; /* sizeof(struct encryption_info_command) */
+ uint32_t cryptoff; /* file offset of encrypted range */
+ uint32_t cryptsize; /* file size of encrypted range */
+ uint32_t cryptid; /* which enryption system,
+ 0 means not-encrypted yet */
+};
+
+/*
+ * The encryption_info_command_64 contains the file offset and size of an
+ * of an encrypted segment (for use in x86_64 targets).
+ */
+struct encryption_info_command_64 {
+ uint32_t cmd; /* LC_ENCRYPTION_INFO_64 */
+ uint32_t cmdsize; /* sizeof(struct encryption_info_command_64) */
+ uint32_t cryptoff; /* file offset of encrypted range */
+ uint32_t cryptsize; /* file size of encrypted range */
+ uint32_t cryptid; /* which enryption system,
+ 0 means not-encrypted yet */
+ uint32_t pad; /* padding to make this struct's size a multiple
+ of 8 bytes */
+};
+
+/*
+ * The version_min_command contains the min OS version on which this
+ * binary was built to run.
+ */
+struct version_min_command {
+ uint32_t cmd; /* LC_VERSION_MIN_MACOSX or
+ LC_VERSION_MIN_IPHONEOS or
+ LC_VERSION_MIN_WATCHOS or
+ LC_VERSION_MIN_TVOS */
+ uint32_t cmdsize; /* sizeof(struct min_version_command) */
+ uint32_t version; /* X.Y.Z is encoded in nibbles xxxx.yy.zz */
+ uint32_t sdk; /* X.Y.Z is encoded in nibbles xxxx.yy.zz */
+};
+
+/*
+ * The build_version_command contains the min OS version on which this
+ * binary was built to run for its platform. The list of known platforms and
+ * tool values following it.
+ */
+struct build_version_command {
+ uint32_t cmd; /* LC_BUILD_VERSION */
+ uint32_t cmdsize; /* sizeof(struct build_version_command) plus */
+ /* ntools * sizeof(struct build_tool_version) */
+ uint32_t platform; /* platform */
+ uint32_t minos; /* X.Y.Z is encoded in nibbles xxxx.yy.zz */
+ uint32_t sdk; /* X.Y.Z is encoded in nibbles xxxx.yy.zz */
+ uint32_t ntools; /* number of tool entries following this */
+};
+
+struct build_tool_version {
+ uint32_t tool; /* enum for the tool */
+ uint32_t version; /* version number of the tool */
+};
+
+/* Known values for the platform field above. */
+#define PLATFORM_MACOS 1
+#define PLATFORM_IOS 2
+#define PLATFORM_TVOS 3
+#define PLATFORM_WATCHOS 4
+#define PLATFORM_BRIDGEOS 5
+#define PLATFORM_IOSMAC 6
+#define PLATFORM_IOSSIMULATOR 7
+#define PLATFORM_TVOSSIMULATOR 8
+#define PLATFORM_WATCHOSSIMULATOR 9
+#define PLATFORM_DRIVERKIT 10
+
+/* Known values for the tool field above. */
+#define TOOL_CLANG 1
+#define TOOL_SWIFT 2
+#define TOOL_LD 3
+
+/*
+ * The dyld_info_command contains the file offsets and sizes of
+ * the new compressed form of the information dyld needs to
+ * load the image. This information is used by dyld on Mac OS X
+ * 10.6 and later. All information pointed to by this command
+ * is encoded using byte streams, so no endian swapping is needed
+ * to interpret it.
+ */
+struct dyld_info_command {
+ uint32_t cmd; /* LC_DYLD_INFO or LC_DYLD_INFO_ONLY */
+ uint32_t cmdsize; /* sizeof(struct dyld_info_command) */
+
+ /*
+ * Dyld rebases an image whenever dyld loads it at an address different
+ * from its preferred address. The rebase information is a stream
+ * of byte sized opcodes whose symbolic names start with REBASE_OPCODE_.
+ * Conceptually the rebase information is a table of tuples:
+ * <seg-index, seg-offset, type>
+ * The opcodes are a compressed way to encode the table by only
+ * encoding when a column changes. In addition simple patterns
+ * like "every n'th offset for m times" can be encoded in a few
+ * bytes.
+ */
+ uint32_t rebase_off; /* file offset to rebase info */
+ uint32_t rebase_size; /* size of rebase info */
+
+ /*
+ * Dyld binds an image during the loading process, if the image
+ * requires any pointers to be initialized to symbols in other images.
+ * The bind information is a stream of byte sized
+ * opcodes whose symbolic names start with BIND_OPCODE_.
+ * Conceptually the bind information is a table of tuples:
+ * <seg-index, seg-offset, type, symbol-library-ordinal, symbol-name, addend>
+ * The opcodes are a compressed way to encode the table by only
+ * encoding when a column changes. In addition simple patterns
+ * like for runs of pointers initialzed to the same value can be
+ * encoded in a few bytes.
+ */
+ uint32_t bind_off; /* file offset to binding info */
+ uint32_t bind_size; /* size of binding info */
+
+ /*
+ * Some C++ programs require dyld to unique symbols so that all
+ * images in the process use the same copy of some code/data.
+ * This step is done after binding. The content of the weak_bind
+ * info is an opcode stream like the bind_info. But it is sorted
+ * alphabetically by symbol name. This enable dyld to walk
+ * all images with weak binding information in order and look
+ * for collisions. If there are no collisions, dyld does
+ * no updating. That means that some fixups are also encoded
+ * in the bind_info. For instance, all calls to "operator new"
+ * are first bound to libstdc++.dylib using the information
+ * in bind_info. Then if some image overrides operator new
+ * that is detected when the weak_bind information is processed
+ * and the call to operator new is then rebound.
+ */
+ uint32_t weak_bind_off; /* file offset to weak binding info */
+ uint32_t weak_bind_size; /* size of weak binding info */
+
+ /*
+ * Some uses of external symbols do not need to be bound immediately.
+ * Instead they can be lazily bound on first use. The lazy_bind
+ * are contains a stream of BIND opcodes to bind all lazy symbols.
+ * Normal use is that dyld ignores the lazy_bind section when
+ * loading an image. Instead the static linker arranged for the
+ * lazy pointer to initially point to a helper function which
+ * pushes the offset into the lazy_bind area for the symbol
+ * needing to be bound, then jumps to dyld which simply adds
+ * the offset to lazy_bind_off to get the information on what
+ * to bind.
+ */
+ uint32_t lazy_bind_off; /* file offset to lazy binding info */
+ uint32_t lazy_bind_size; /* size of lazy binding infs */
+
+ /*
+ * The symbols exported by a dylib are encoded in a trie. This
+ * is a compact representation that factors out common prefixes.
+ * It also reduces LINKEDIT pages in RAM because it encodes all
+ * information (name, address, flags) in one small, contiguous range.
+ * The export area is a stream of nodes. The first node sequentially
+ * is the start node for the trie.
+ *
+ * Nodes for a symbol start with a uleb128 that is the length of
+ * the exported symbol information for the string so far.
+ * If there is no exported symbol, the node starts with a zero byte.
+ * If there is exported info, it follows the length.
+ *
+ * First is a uleb128 containing flags. Normally, it is followed by
+ * a uleb128 encoded offset which is location of the content named
+ * by the symbol from the mach_header for the image. If the flags
+ * is EXPORT_SYMBOL_FLAGS_REEXPORT, then following the flags is
+ * a uleb128 encoded library ordinal, then a zero terminated
+ * UTF8 string. If the string is zero length, then the symbol
+ * is re-export from the specified dylib with the same name.
+ * If the flags is EXPORT_SYMBOL_FLAGS_STUB_AND_RESOLVER, then following
+ * the flags is two uleb128s: the stub offset and the resolver offset.
+ * The stub is used by non-lazy pointers. The resolver is used
+ * by lazy pointers and must be called to get the actual address to use.
+ *
+ * After the optional exported symbol information is a byte of
+ * how many edges (0-255) that this node has leaving it,
+ * followed by each edge.
+ * Each edge is a zero terminated UTF8 of the addition chars
+ * in the symbol, followed by a uleb128 offset for the node that
+ * edge points to.
+ *
+ */
+ uint32_t export_off; /* file offset to lazy binding info */
+ uint32_t export_size; /* size of lazy binding infs */
+};
+
+/*
+ * The following are used to encode rebasing information
+ */
+#define REBASE_TYPE_POINTER 1
+#define REBASE_TYPE_TEXT_ABSOLUTE32 2
+#define REBASE_TYPE_TEXT_PCREL32 3
+
+#define REBASE_OPCODE_MASK 0xF0
+#define REBASE_IMMEDIATE_MASK 0x0F
+#define REBASE_OPCODE_DONE 0x00
+#define REBASE_OPCODE_SET_TYPE_IMM 0x10
+#define REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB 0x20
+#define REBASE_OPCODE_ADD_ADDR_ULEB 0x30
+#define REBASE_OPCODE_ADD_ADDR_IMM_SCALED 0x40
+#define REBASE_OPCODE_DO_REBASE_IMM_TIMES 0x50
+#define REBASE_OPCODE_DO_REBASE_ULEB_TIMES 0x60
+#define REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB 0x70
+#define REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_ULEB 0x80
+
+
+/*
+ * The following are used to encode binding information
+ */
+#define BIND_TYPE_POINTER 1
+#define BIND_TYPE_TEXT_ABSOLUTE32 2
+#define BIND_TYPE_TEXT_PCREL32 3
+
+#define BIND_SPECIAL_DYLIB_SELF 0
+#define BIND_SPECIAL_DYLIB_MAIN_EXECUTABLE -1
+#define BIND_SPECIAL_DYLIB_FLAT_LOOKUP -2
+#define BIND_SPECIAL_DYLIB_WEAK_LOOKUP -3
+
+#define BIND_SYMBOL_FLAGS_WEAK_IMPORT 0x1
+#define BIND_SYMBOL_FLAGS_NON_WEAK_DEFINITION 0x8
+
+#define BIND_OPCODE_MASK 0xF0
+#define BIND_IMMEDIATE_MASK 0x0F
+#define BIND_OPCODE_DONE 0x00
+#define BIND_OPCODE_SET_DYLIB_ORDINAL_IMM 0x10
+#define BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB 0x20
+#define BIND_OPCODE_SET_DYLIB_SPECIAL_IMM 0x30
+#define BIND_OPCODE_SET_SYMBOL_TRAILING_FLAGS_IMM 0x40
+#define BIND_OPCODE_SET_TYPE_IMM 0x50
+#define BIND_OPCODE_SET_ADDEND_SLEB 0x60
+#define BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB 0x70
+#define BIND_OPCODE_ADD_ADDR_ULEB 0x80
+#define BIND_OPCODE_DO_BIND 0x90
+#define BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB 0xA0
+#define BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED 0xB0
+#define BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB 0xC0
+#define BIND_OPCODE_THREADED 0xD0
+#define BIND_SUBOPCODE_THREADED_SET_BIND_ORDINAL_TABLE_SIZE_ULEB 0x00
+#define BIND_SUBOPCODE_THREADED_APPLY 0x01
+
+
+/*
+ * The following are used on the flags byte of a terminal node
+ * in the export information.
+ */
+#define EXPORT_SYMBOL_FLAGS_KIND_MASK 0x03
+#define EXPORT_SYMBOL_FLAGS_KIND_REGULAR 0x00
+#define EXPORT_SYMBOL_FLAGS_KIND_THREAD_LOCAL 0x01
+#define EXPORT_SYMBOL_FLAGS_KIND_ABSOLUTE 0x02
+#define EXPORT_SYMBOL_FLAGS_WEAK_DEFINITION 0x04
+#define EXPORT_SYMBOL_FLAGS_REEXPORT 0x08
+#define EXPORT_SYMBOL_FLAGS_STUB_AND_RESOLVER 0x10
+
+/*
+ * The linker_option_command contains linker options embedded in object files.
+ */
+struct linker_option_command {
+ uint32_t cmd; /* LC_LINKER_OPTION only used in MH_OBJECT filetypes */
+ uint32_t cmdsize;
+ uint32_t count; /* number of strings */
+ /* concatenation of zero terminated UTF8 strings.
+ Zero filled at end to align */
+};
+
/*
* The symseg_command contains the offset and size of the GNU style
* symbol table information as described in the header file <symseg.h>.
uint32_t header_addr; /* files virtual address */
};
+
+/*
+ * The entry_point_command is a replacement for thread_command.
+ * It is used for main executables to specify the location (file offset)
+ * of main(). If -stack_size was used at link time, the stacksize
+ * field will contain the stack size need for the main thread.
+ */
+struct entry_point_command {
+ uint32_t cmd; /* LC_MAIN only used in MH_EXECUTE filetypes */
+ uint32_t cmdsize; /* 24 */
+ uint64_t entryoff; /* file (__TEXT) offset of main() */
+ uint64_t stacksize;/* if not zero, initial stack size */
+};
+
+
+/*
+ * The source_version_command is an optional load command containing
+ * the version of the sources used to build the binary.
+ */
+struct source_version_command {
+ uint32_t cmd; /* LC_SOURCE_VERSION */
+ uint32_t cmdsize; /* 16 */
+ uint64_t version; /* A.B.C.D.E packed as a24.b10.c10.d10.e10 */
+};
+
+
+/*
+ * The LC_DATA_IN_CODE load commands uses a linkedit_data_command
+ * to point to an array of data_in_code_entry entries. Each entry
+ * describes a range of data in a code section.
+ */
+struct data_in_code_entry {
+ uint32_t offset; /* from mach_header to start of data range*/
+ uint16_t length; /* number of bytes in data range */
+ uint16_t kind; /* a DICE_KIND_* value */
+};
+#define DICE_KIND_DATA 0x0001
+#define DICE_KIND_JUMP_TABLE8 0x0002
+#define DICE_KIND_JUMP_TABLE16 0x0003
+#define DICE_KIND_JUMP_TABLE32 0x0004
+#define DICE_KIND_ABS_JUMP_TABLE32 0x0005
+
+
+
+/*
+ * Sections of type S_THREAD_LOCAL_VARIABLES contain an array
+ * of tlv_descriptor structures.
+ */
+struct tlv_descriptor
+{
+ void* (*thunk)(struct tlv_descriptor*);
+ unsigned long key;
+ unsigned long offset;
+};
+
+/*
+ * LC_NOTE commands describe a region of arbitrary data included in a Mach-O
+ * file. Its initial use is to record extra data in MH_CORE files.
+ */
+struct note_command {
+ uint32_t cmd; /* LC_NOTE */
+ uint32_t cmdsize; /* sizeof(struct note_command) */
+ char data_owner[16]; /* owner name for this LC_NOTE */
+ uint64_t offset; /* file offset of this data */
+ uint64_t size; /* length of data region */
+};
+
#endif /* _MACHO_LOADER_H_ */
projects / apple / xnu.git / blobdiff