[apple/xnu.git] / bsd / netat / adsp_Control.c

/*
 * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
 *
 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
 * 
 * This file contains Original Code and/or Modifications of Original Code
 * as defined in and that are subject to the Apple Public Source License
 * Version 2.0 (the 'License'). You may not use this file except in
 * compliance with the License. The rights granted to you under the License
 * may not be used to create, or enable the creation or redistribution of,
 * unlawful or unlicensed copies of an Apple operating system, or to
 * circumvent, violate, or enable the circumvention or violation of, any
 * terms of an Apple operating system software license agreement.
 * 
 * Please obtain a copy of the License at
 * http://www.opensource.apple.com/apsl/ and read it before using this file.
 * 
 * The Original Code and all software distributed under the License are
 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
 * Please see the License for the specific language governing rights and
 * limitations under the License.
 * 
 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
 */
/*
 *      Copyright (c) 1990, 1995-1998 Apple Computer, Inc.
 *      All Rights Reserved.
 */

/* Control.c 
 * From Mike Shoemaker v01.25 07/02/90 for MacOS
 * 09/07/95 - Modified for performance (Tuyen Nguyen)
 *    Modified for MP, 1996 by Tuyen Nguyen
 *   Modified, April 9, 1997 by Tuyen Nguyen for MacOSX.
 */

#include <sys/errno.h>
#include <sys/types.h>
#include <sys/param.h>
#include <machine/spl.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/filedesc.h>
#include <sys/fcntl.h>
#include <sys/mbuf.h>
#include <sys/time.h>
#include <sys/socket.h>

#include <netat/sysglue.h>
#include <netat/appletalk.h>
#include <netat/ddp.h>
#include <netat/at_pcb.h>
#include <netat/debug.h>
#include <netat/adsp.h>
#include <netat/adsp_internal.h>

/* # of additional ticks to add to any timer that we're queuing up.  For 
 * very short delays (1 and 2), the timer fires before the transmit 
 * even takes place */
#define TX_DLY  2

int adsp_window = 1;

/*
 * CalcRecvWdw
 *
 * INPUTS:
 *              sp              ADSP Stream
 * OUTPUTS:
 *              # of bytes in avail in local receive queue
 */
int CalcRecvWdw(sp)             /* (CCBPtr sp) */
    CCBPtr sp;
{
    int bytes;

    bytes = calcRecvQ(sp);
    bytes = sp->rbuflen - bytes; /* get what is left */

    if (bytes <= 16) {          /* %%% this should be zero */
        sp->rbufFull = 1;       /* Save flag that our recv buf is full */
        return 0;
    }
    else
        return ((bytes+bytes+bytes) >> 2) + 1; /* %%% */
}

calcRecvQ(sp)
    CCBPtr sp;
{
    int bytes = 0;
#ifdef AT_Socket
    register struct mbuf *m, *p;

    if (((sp->gref)->so)->so_rcv.sb_mb)
      for (p = ((sp->gref)->so)->so_rcv.sb_mb; p; p = p->m_nextpkt)
        for (m = p; m; m = m->m_next)
          bytes += m->m_len;
#else
    register gbuf_t *mb;

    if (sp->rData) {            /* There is data in buffer */
        if (mb = sp->rbuf_mb) {
            do {
                bytes += gbuf_msgsize(mb);
                mb = gbuf_next(mb);
            } while (mb);
        }
        if (mb = sp->crbuf_mb)
            bytes += gbuf_msgsize(mb);
    }
#endif
    return bytes;
}

/*
 * CheckSend
 * 
 * Check to see if the transmit PB is available and if there is anything 
 * to transmit. Start off any pending transmit.
 *
 * Normally called from the write completion routine
 *
 * INPUTS:
 *              sp              Connection control block
 * OUTPUTS:
 *              true if sent a packet   
 */
void CheckSend(sp)              /* (CCBPtr sp) */
    register CCBPtr sp;
{
    int i;
    int attnMsg;                /* True if attention message */
    register gbuf_t *mp;        /* send message block */
#ifdef notdef
    register gbuf_t *tmp;
    u_char current;
#endif
    char *dp;                   /* a data pointer */
    int use_attention_code;
    int len;                    /* length used in allocd mblk */
    int datalen;                /* amount of data attached to mblk */
    gbuf_t *mprev, *mlist = 0;

top:

    if (sp->state == sClosed)
        return;

                                /* get a message block to hold DDP and
                                 * ADSP headers + 2 bytes of attention
                                 * code if necessary */
    if ((mp = gbuf_alloc(AT_WR_OFFSET + DDPL_FRAME_LEN + ADSP_FRAME_LEN + ADSP_OPEN_FRAME_LEN + 2,
                     PRI_LO)) == 0) {
        if (mlist)
                gbuf_freel(mlist);
        return;         /* can't get buffers... do nothing! */
    }
    sp->callSend = 0;           /* Clear flag */
    use_attention_code = 0;
    len = 0;
    datalen = 0;

    gbuf_rinc(mp,AT_WR_OFFSET);
    gbuf_wset(mp,DDPL_FRAME_LEN); /* leave room for DDP header */

    if (sp->sendCtl) {
        short mask = 0;
                
        i = sp->sendCtl;        /* get local copy bitmap of */
                                /* which ctl packets to send. */
        attnMsg = 0;
                
        if (i & 0x1E)           /* One of the open ctrl packets */
        {

            /* point past ADSP header (no attention) */
            dp = ((char *) gbuf_wptr(mp)) + ADSP_FRAME_LEN; 
            UAL_ASSIGN_HTON(sp->f.pktFirstByteSeq, sp->firstRtmtSeq);
            
            UAS_ASSIGN_HTON(sp->of.version, netw(0x0100)); /* Fill in open connection parms */
            UAS_ASSIGN_HTON(sp->of.dstCID, sp->remCID); /* Destination CID */
            UAL_ASSIGN_HTON(sp->of.pktAttnRecvSeq, sp->attnRecvSeq);
            bcopy((caddr_t) &sp->of, (caddr_t) dp, ADSP_OPEN_FRAME_LEN);
            len += ADSP_OPEN_FRAME_LEN;

            if (i & B_CTL_OREQ) {
                UAS_ASSIGN_HTON(sp->f.CID, sp->locCID);
                mask = B_CTL_OREQ;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_OREQ;
            } else if (i & B_CTL_OACK) {
                UAS_ASSIGN_HTON(sp->f.CID, sp->locCID);
                mask = B_CTL_OACK;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_OACK;
            } else if (i & B_CTL_OREQACK) {
                UAS_ASSIGN_HTON(sp->f.CID, sp->locCID);
                mask = B_CTL_OREQACK;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_OREQACK;
            } else              /* Deny */
            {
                UAS_ASSIGN(sp->f.CID, 0);
                mask = B_CTL_ODENY;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_ODENY;
                UAL_ASSIGN(sp->f.pktFirstByteSeq, 0);
            }
                        
            if (i & (B_CTL_OREQ | B_CTL_OREQACK)) 
                /* Need to start up a timer for it */
            {
                /* It's possible that we've received a duplicate 
                 * open request.  In this case, there will already be 
                 * a timer queued up for the request+ack 
                 *  packet we sent the first time.  So remove the timer 
                 * and start another. 
                 */
                RemoveTimerElem(&adspGlobal.slowTimers, &sp->ProbeTimer);
                InsertTimerElem(&adspGlobal.slowTimers, &sp->ProbeTimer, 
                                sp->openInterval+1);
            }
        } else {
            /* seq # of next byte to send */
            UAL_ASSIGN_HTON(sp->f.pktFirstByteSeq, sp->sendSeq);        
                        
            if (i & B_CTL_CLOSE) {
                sp->state = sClosed; /* Now we're closed */
                mask = B_CTL_CLOSE;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_CLOSE;
            } else if (i & B_CTL_PROBE) {
                mask = B_CTL_PROBE;
                sp->f.descriptor = 
                    ADSP_CONTROL_BIT | ADSP_CTL_PROBE | ADSP_ACK_REQ_BIT;
            } else if (i & B_CTL_FRESET) {
                mask = B_CTL_FRESET;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_FRESET;
                InsertTimerElem(&adspGlobal.fastTimers, 
                                &sp->ResetTimer, sp->rtmtInterval+TX_DLY);
            } else if (i & B_CTL_FRESETACK) {
                mask = B_CTL_FRESETACK;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_FRESET_ACK;
            }
            else if (i & B_CTL_RETRANSMIT) {
                mask = B_CTL_RETRANSMIT;
                sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_CTL_RETRANSMIT;
            } 
            else {
                dPrintf(D_M_ADSP, D_L_ERROR, ("CheckSend: Control bit error\n"));
           }
        }                       /* non open control packet */

        sp->sendCtl &= ~mask; 
        goto sendit;
    }                           /* send control packet */

    if (sp->sendAttnData)       /* Send attn ready to go? */
    {
        sp->sendAttnData = 0;   /* Clear Flags */
        if (sp->sapb) {
            sp->sendAttnAck  = 0; /* This will also do an Attn Ack */
        
            attnMsg = 1;
            sp->f.descriptor = ADSP_ATTENTION_BIT | ADSP_ACK_REQ_BIT;
            if (gbuf_cont(sp->sapb->mp)) {
                gbuf_cont(mp) = gbuf_dupm(gbuf_cont(sp->sapb->mp)); 
                /* Major hack here.  The ADSP Attn code is butted up against 
                 * the end of the adsp packet header, and the length is 
                 * increased by 2.  (There is a pad field behind the adsp
                 * header in the CCB just for this purpose.)
                 */
            }
            use_attention_code++;

            sp->f.data[0] = high(sp->sapb->u.attnParams.attnCode);
            sp->f.data[1] = low(sp->sapb->u.attnParams.attnCode);
            InsertTimerElem(&adspGlobal.fastTimers, &sp->AttnTimer, 
                                                     sp->rtmtInterval+TX_DLY);
            goto sendit;
        }
    }                           /* attn data */
    
    if (sp->sendAttnAck)        /* Send attn ack ready to go? */
    {   
        attnMsg = 1;
        sp->f.descriptor = ADSP_CONTROL_BIT | ADSP_ATTENTION_BIT;
        sp->sendAttnAck = 0;    
        goto sendit;
    }                           /* attn ack */
        
    if ((sp->state == sOpen || sp->state == sClosing) && /* Correct state */
        (!sp->waitingAck) &&    /* not waiting for an ACK */
        (sp->sData) &&          /* have data to send */
        (GTE(sp->sendWdwSeq,sp->sendSeq)) && /* he has room to accept it */
        (sp->pktSendCnt < sp->pktSendMax)) /* haven't sent too many pkts 
                                            * in a row. */
    {
        attnMsg = 0;
        if (datalen = attachData(sp, mp)) /* attach data to mp */
            goto sendit;        /* if successful, sendit */
    }

    if (sp->sendDataAck) {
        UAL_ASSIGN_HTON(sp->f.pktFirstByteSeq, sp->sendSeq); /* seq # of next byte */
        attnMsg = 0;
        sp->f.descriptor = ADSP_CONTROL_BIT;
        goto sendit;
    }

    /*
     * Nothing left to do...
     */
    if (mp)
        gbuf_freem(mp);
    if (mlist)
        adsp_sendddp(sp, mlist, 0, &sp->remoteAddress, DDP_ADSP);
    return;

sendit:

    if (attnMsg) {
        UAL_ASSIGN_HTON(sp->f.pktFirstByteSeq, sp->attnSendSeq);
        UAL_ASSIGN_HTON(sp->f.pktNextRecvSeq, sp->attnRecvSeq);
        UAS_ASSIGN(sp->f.pktRecvWdw, 0);        /* Always zero in attn pkt */
    } else {
        sp->sendDataAck = 0;
        UAL_ASSIGN_HTON(sp->f.pktNextRecvSeq, sp->recvSeq);
        UAS_ASSIGN_HTON(sp->f.pktRecvWdw, CalcRecvWdw(sp));
    }
    if (use_attention_code) {
        bcopy((caddr_t) &sp->f, (caddr_t) gbuf_wptr(mp), ADSP_FRAME_LEN + 2);
        len += ADSP_FRAME_LEN + 2;
    } else {
        bcopy((caddr_t) &sp->f, (caddr_t) gbuf_wptr(mp), ADSP_FRAME_LEN);
        len += ADSP_FRAME_LEN;
    }
    gbuf_winc(mp,len);          /* update mblk length  */
    if (mlist)
        gbuf_next(mprev) = mp;
    else
        mlist = mp;
    mprev = mp;

    if (sp->state == sClosed) { /* must have sent a close advice */
                                /* send header + data */
        adsp_sendddp(sp, mlist, 0, &sp->remoteAddress, DDP_ADSP);
        DoClose(sp, 0, -1);     /* complete close! */
        return;
    }
    if (sp->state == sClosing) /* See if we were waiting on this write */
        CheckOkToClose(sp);
    goto top;
}

/*
 * completepb delivers a paramater block with all its appropriate fields
 * set back to the user.  
 *
 * The assumptions here are that the PB is not linked to any queue, 
 * that the fields including ioResult are set, and that the 
 * kernel is no longer interested in the mblks that may or
 * maynot be linked to this pb.
 */
void completepb(sp, pb)
    register CCBPtr sp;
    register struct adspcmd *pb;
{
    if (sp->gref && (sp->gref->info == (caddr_t)sp->sp_mp)) {
        if (gbuf_len(pb->mp) > sizeof(struct adspcmd))
                gbuf_wset(pb->mp,sizeof(struct adspcmd));
        SndMsgUp(sp->gref, pb->mp);
        NotifyUser(sp);
    } else
        gbuf_freem(pb->mp);
}

attachData(sp, mp)
    register CCBPtr sp;
    register gbuf_t *mp;
{
    int seq;
    int cnt;
    char eom = 0;
    int bsize;
    int diff;
    char sendAckReq;
    int partial = 0;            /* flag for a partial send */
    int tcnt = 0;
    register gbuf_t *smp;       /* send data message block */
    register gbuf_t *psmp;      /* previous message block */

    sendAckReq = 0;

    if (LT(sp->sendSeq, sp->firstRtmtSeq)) /* Sanity check on send seq */
        sp->sendSeq = sp->firstRtmtSeq; /* seq must be oldest in buffer. */

    /* This test and assignment was necessary because the retry VBL could 
     * have fired and reset send Seq to first Rtmt Seq, and then an 
     * expected ACK comes in that bumps first Rtmt Seq up.  Then we 
     * have the problem that send Seq is less than first Rtmt Seq.
     * The easiest fix to this timing dilemma seems to be to reset 
     * sendSeq to first Rtmt Seq if we're sending the first packet.
     */
    UAL_ASSIGN_HTON(sp->f.pktFirstByteSeq, sp->sendSeq);
                
    if (smp = sp->sbuf_mb) /* Get oldest header */
        eom = 1;
    else if (smp = sp->csbuf_mb)
        eom = 0;

    if (smp == 0) {             /* this shouldn't happen... */
            sp->sData = 0;
            return 0;
    }
    /*
     * Must find next byte to transmit
     */
    seq = sp->firstRtmtSeq;     /* Seq # of oldest in buffer */
    while ((diff = (sp->sendSeq - seq)) >= ((bsize = gbuf_msgsize(smp)) + eom)) {
        seq += bsize + eom;     /* update sequence # */
        if (gbuf_next(smp)) { /* if another send buffer */
            smp = gbuf_next(smp);
            eom = 1;
        } else if (smp == sp->csbuf_mb) { /* seen the current one? */
            smp = 0;
            break;
        } else if (sp->csbuf_mb) { /* look at it */
            smp = sp->csbuf_mb;
            eom = 0;
        } else {                /* no more buffers */
            smp = 0;
            break;
        }
    }                   /* while */
    
    if (smp) {
        if (gbuf_next(smp) == 0)        /* last block */
            sendAckReq = 1;
        cnt = bsize - diff;     /* # of bytes in this block */
    } else
        cnt = 0;

    /*
     * Check to see if the number of bytes is less than the 'send 
     * Blocking' setting. If so, then we won't send this data unless 
     * we're flushing.  So we set up a timer to force a flush later.
     */
    if ((cnt < sp->sendBlocking) && !sp->writeFlush) {
        InsertTimerElem(&adspGlobal.fastTimers, &sp->FlushTimer, 
                                                 sp->sendInterval);
        return 0;               /* no data to send */
    }

    if (cnt > ADSP_MAX_DATA_LEN) { /* truncate to one packet */
        cnt = ADSP_MAX_DATA_LEN;
        eom = 0;
        sendAckReq = 0; /* Won't send ack because end of data */
        partial++;
    }

    if (smp) {
        /* trim extra bytes off the beginning of the "block" before the copy */
        while (diff) {
            if (gbuf_len(smp) > diff)
                break;
            else
                diff -= gbuf_len(smp);
            smp = gbuf_cont(smp);
        }
        if((gbuf_cont(mp) = gbuf_dupm(smp)) == 0) /* copy the data */
            return 0;
        smp = gbuf_cont(mp);    /* use the new message blocks */
        gbuf_rinc(smp,diff);    /* and get to the first byte of data to send */
    }
    /*
     * Check to see if this many bytes will close the other end's 
     * receive window. If so, we need to send an ack request along 
     * with this.  sendWdwSeq is the seq # of the last byte that 
     * the remote has room for
     */
    if ((diff = sp->sendWdwSeq + 1 - sp->sendSeq) <= cnt) {
        if (diff < cnt) { /* Won't fit exactly */
            eom = 0;    /* so can't send EOM */
            cnt = diff;
            partial++;
        }
        sendAckReq = 1;         /* Make him tell us new recv. window */
        sp->noXmitFlow = 1;     /* Don't do flow control calc. */
    }
    
    /* trim extra bytes off the tail of the "block" after the copy */
    if (partial && smp) {
        psmp = smp;
        tcnt = cnt;
        while (tcnt && smp) { /* while there are message blocks and data */
            if (tcnt >= gbuf_len(smp)) {
                tcnt -= gbuf_len(smp);
                if (tcnt) {
                    psmp = smp;
                    smp = gbuf_cont(smp);
                } else {
                    if (psmp != smp) { /* not the first item on the list */
                        gbuf_cont(psmp) = 0;
                        gbuf_freem(smp);
                        smp = psmp;
                    } else {
                        gbuf_freem(gbuf_cont(smp));
                        gbuf_cont(smp) = 0;
                    }
                    break;
                }
            } else {
                gbuf_wset(smp,tcnt);
                if (gbuf_cont(smp)) {
                    gbuf_freem(gbuf_cont(smp));
                    gbuf_cont(smp) = 0;
                }
                break;
            }
        }
    }

    sp->sendSeq += cnt + eom;   /* Update sendSeq field */

    if (GT(sp->sendSeq, sp->maxSendSeq)) /* Keep track of >st ever sent */
        sp->maxSendSeq = sp->sendSeq;
        
    if (eom)
        sp->f.descriptor = ADSP_EOM_BIT;
    else
        sp->f.descriptor = 0;
        
    if (sendAckReq || (++sp->pktSendCnt >= sp->pktSendMax)) {
        /* Last packet in a series */
        sp->f.descriptor |= ADSP_ACK_REQ_BIT; /* We want an ack to this */
        sp->waitingAck = 1;     /* Flag that we're waiting */
        sp->sendStamp = SysTicks(); /* Save time we sent request */
        sp->timerSeq = sp->sendSeq; /* Save seq # we want acked */
        InsertTimerElem(&adspGlobal.fastTimers, &sp->RetryTimer, 
                        sp->rtmtInterval+TX_DLY);
    }
    return cnt + eom;
}