xnu-1228.15.4.tar.gz

[apple/xnu.git] / bsd / conf / MASTER

#
# Mach Operating System
# Copyright (c) 1986 Carnegie-Mellon University
# All rights reserved.  The CMU software License Agreement
# specifies the terms and conditions for use and redistribution.
#  
#######################################################################
#
#	Master machine independent configuration file.
#
#	Specific configuration files are created based on this and
#	the machine specific master file using the doconf script.
#
#	Any changes to the master configuration files will affect all
#	other configuration files based upon it.
#
#######################################################################
#
#	To build a configuration, execute "doconf <configuration>."
#	Configurations are specified in the "Configurations:" section
#	of the MASTER and MASTER.* files as follows:
#
#	<configuration> = [ <attribute0> <attribute1> ... <attributeN> ]
#
#	Lines in the MASTER and MASTER.* files are selected based on
#	the attribute selector list, found in a comment at the end of
#	the line.  This is a list of attributes separated by commas.
#	The "!" operator selects the line if none of the attributes are
#	specified.
#
#	For example:
#
#	<foo,bar>	selects a line if "foo" or "bar" are specified.
#	<!foo,bar>	selects a line if neither "foo" nor "bar" is
#			specified.
#
#	Lines with no attributes specified are selected for all
#	configurations.
#
#######################################################################
#
#  STANDARD CONFIGURATION OPTIONS (select any combination)
#
#	debug   = extra kernel level debugging support
#	mach    = Mach support 
#
#  EXPERIMENTAL CONFIGURATION OPTIONS (select any combination, carefully)
#
#	host	= host resource control support
#
#  MULTI-PROCESSOR CONFIGURATION (select at most one)
#
#	multi16 = enable 16 multi-processors
#	multi32 = enable 32 multi-processors
#	multi48 = enable 48 multi-processors
#
#  SYSTEM SIZE CONFIGURATION (select exactly one)
#
#	xlarge = extra large scale system configuration
#	large  = large scale system configuration
#	medium = medium scale system configuration
#	small  = small scale system configuration
#	xsmall = extra small scale system configuration
#	bsmall = special extra small scale system configuration 
#
#######################################################################
#  
#  Standard Mach Research Configurations:
#  -------- ---- -------- ---------------
#
#  These are the default configurations that can be used by most sites.
#  They are used internally by the Mach project.
#
#  MACH      = [mach multi16 medium debug]
#
#######################################################################
#
ident		NeXT

# obsolete timezone spec
options		TIMEZONE=0, PST=0

options		QUOTA			# 				# <quota>
options		INET			#				# <inet>
options		ABSOLUTETIME_SCALAR_TYPE
options		NEW_VM_CODE	#				# <newvm>
options		OLD_VM_CODE	#				# <!newvm>
options		HW_AST		# Hardware ast support		# <hw_ast>
options 	HW_FOOTPRINT	# Cache footprint support	# <hw_foot>
options		CONFIG_LCTX	# Login Context

options 	MACH		# Standard Mach features	# <mach>
options		MACH_ASSERT	# Compile in assertions		# <mach_assert>
options		MACH_COMPAT	# Vendor syscall compatibility  # <mach>
options		MACH_COUNTERS	# counters			# <count>
options		MACH_DEBUG	# IPC debugging interface	# <mdebug>
options		MACH_FASTLINK	# Fast symbolic links
options		MACH_FIXPRI	# Fixed priority threads	# <fixpri>
options		MACH_HOST	# Mach host (resource alloc.)	# <host>
options		MACH_IPC_COMPAT	# Enable old IPC interface	# <ipc_compat>
options		MACH_IPC_DEBUG	# Enable IPC debugging calls	# <ipc_debug>
options		MACH_IPC_TEST	# Testing code/printfs		# <ipc_test>
options		MACH_LDEBUG	# Sanity-check simple locking	# <test>
options 	MACH_NP		# Mach IPC support		# <np>
options		MACH_NBC	# No buffer cache		# <nbc>
options		MACH_NET	# Fast network access		# <mach_net>
options		MACH_XP		# external pager support	# <xp>
options		NORMA_IPC	# NORMA IPC support		# <norma_ipc>
options		NORMA_DEVICE	# NORMA unified device names	# <norma_device>
options		NORMA_VM	# NORMA virtual memory support	# <norma_vm>
options		NORMA_TASK	# NORMA task support		# <norma_task>
options		NORMA_ETHER	# NORMA across ethernet		# <norma_ether>
options		SIMPLE_CLOCK	# don't assume fixed tick	# <simple_clock>
options		XPR_DEBUG	# kernel tracing		# <xpr_debug>
options		KDEBUG		# kernel tracing		# <kdebug>
options		DDM_DEBUG	# driverkit-style tracing	# <ddm_debug>
options		MACH_OLD_VM_COPY # Old vm_copy technology	# <!newvm>
options		NO_DIRECT_RPC	# for untyped mig servers	# 
options		IPX		# ipx stack 			# <ipx>
options		EON		# 				# <eon>
options		ISO		# ISO stack			# <iso>
options		LLC		# 802.2 support			# <llc>
options		LOOP		# loopback support		# <loop>
options		MROUTING	# multicast routing		# <mrouting>
options		ROUTING		# routing			# <routing>
options		NETMIBS		#				# <netmibs>
options		VLAN		#				# <vlan>
options		BOND		#				# <bond>
options		IPDIVERT        # Divert sockets (for NAT)      # <ipdivert>
options		IPFIREWALL      # IP Firewalling (used by NAT)  # <ipfirewall>
options		IPFIREWALL_FORWARD      #Transparent proxy      # <ipfirewall>
options		IPFIREWALL_DEFAULT_TO_ACCEPT    # allow everything by default   # <ipfirewall>
options		DUMMYNET	# dummynet support		# <dummynet>
options		TRAFFIC_MGT	# traffic management support		# <traffic_mgt>
options		IPFW2		# IP firewall (new version)	# <ipfw2>
options		MULTICAST	# Internet Protocol Class-D	$
options		TCPDEBUG	# TCP debug			# <tcpdebug>
options		RANDOM_IP_ID	# random (not sequential) ip ids	# <randomipid>
options		TCP_DROP_SYNFIN	# Drop TCP packets with SYN+FIN set	# <tcpdrop_synfin>
options		ICMP_BANDLIM	# ICMP bandwidth limiting sysctl
options		IFNET_INPUT_SANITY_CHK	# allow dlil/ifnet input sanity check # <ifnet_input_chk>
options		AUDIT		# Security event auditing	# <audit>
options		SYSV_SEM	# SVID semaphores			# <sysv_sem>
options		SYSV_MSG	# SVID messages				# <sysv_msg>
options		SYSV_SHM	# SVID shared mem			# <sysv_shm>
options		PANIC_INFO	# want kernel panic info	# <panic_info>
options		DEVELOPMENT	# dev kernel				# <development>

# secure_kernel - secure kernel from user programs
options     SECURE_KERNEL       # <secure_kernel> 

#
#	4.4 general kernel 
#
options		SOCKETS		# socket support			# <inet, inet6, netat>
options 	COMPAT_43_TTY	# 4.3 BSD tty compat	# <compat_43_tty>
options 	DIAGNOSTIC	# diagnostics				# <diagnostic>
options		CONFIG_DTRACE	# dtrace support			# <config_dtrace>
options		GPROF		# build profiling			# <profile>
options		SENDFILE	# sendfile					# <sendfile>
options		NETWORKING	# networking layer			# <inet, inet6, netat>
options		CONFIG_FSE	# file system events		# <config_fse>
options		CONFIG_IMAGEBOOT	# local image boot	# <config_imageboot>
options		CONFIG_SOWUPCALL	# SB_UPCALL on sowwakeup	# <config_sowupcall>
options		CONFIG_FORCE_OUT_IFP	# Force IP output to use an interface # <config_force_out_ifp>
options		CONFIG_MBUF_NOEXPAND	# limit mbuf expansion	# <config_mbuf_noexpand>
options		CONFIG_MBUF_JUMBO	# jumbo cluster pool	# <config_mbuf_jumbo>
options		CONFIG_SCOPEDROUTING	# scoped routing on by default	# <config_scopedrouting>
options		CONFIG_IP_EDGEHOLE	# Drop tagged packets at EDGE interface # <config_ip_edgehole>

options		CONFIG_WORKQUEUE	# <config_workqueue>

#
#	4.4 filesystems 
#
options		FFS			# Fast Filesystem Support	# <ffs>
options		HFS			# HFS/HFS+ support		# <hfs>
options		FIFO		# fifo support			# <fifo>
options		UNION		# union_fs support		# <union>
options		FDESC		# fdesc_fs support		# <fdesc>
options		CD9660		# ISO 9660 CD-ROM support	# <cd9660>
options		DEVFS		# devfs support			# <devfs>
options		JOURNALING	# journaling support	# <journaling>

#
#	file system features
#
options		QUOTA		# file system quotas		# <quota>
options		REV_ENDIAN_FS	# Reverse Endian FS		# <revfs>
options		NAMEDSTREAMS	# named stream vnop support	# <namedstreams>
options		CONFIG_VOLFS	# volfs path support (legacy)	# <config_volfs>

#
# NFS support
#
options		NFSCLIENT	# Be an NFS client		# <nfsclient>
options		NFSSERVER	# Be an NFS server		# <nfsserver>

#
# AppleTalk Support
#
options		NETAT			# AppleTalk support				# <netat>
#options		AURP_SUPPORT    # AppleTalk Update Routing      # <netat>

#
# Machine Independent Apple Features
#
options		KERNSERV	# kernel_server intarface	# <kernserv>
options		MALLOCDEBUG	# kernel malloc debugging	# <mallocdebug>
options		DRIVERKIT 	# driverkit support		# <driverkit>
options		KERNOBJC	# Objective-C support		# <kernobjc>
options		OBJCTEST	# Objc internal test		# <objctest>
options		KERNEL_STACK	# MI kernel stack support	# <kernstack>
profile						# build a profiling kernel	# <profile>

#
#  Point-to-Point Protocol support
#
pseudo-device ppp 2						# <ppp>

#       
# IPv6 Support
#       
options         "INET6"         		# kernel IPv6 Support           # <inet6>
options         IPSEC                  		# IP security            	# <ipsec>
options         IPSEC_ESP              		# IP security            	# <ipsec>
options         "IPV6FIREWALL"         		# IPv6 Firewall Feature   	# <ipv6firewall>
options         "IPV6FIREWALL_DEFAULT_TO_ACCEPT"	#IPv6 Firewall Feature   	# <ipv6firewall>
#options         "IPV6FIREWALL_VERBOSE" 		#IPv6 Firewall Feature   	# <ipv6firewall>

pseudo-device   gif     1		# <gif>
pseudo-device   dummy   2		# <dummy>
pseudo-device   faith   1		# <faith>
pseudo-device   stf 	1 		# <stf>

options			crypto			# <ipsec,crypto>
options			ALLCRYPTO		# <xlarge,large,medium>
options			randomipid		# <inet,randomipid>

options		ZLIB		# inflate/deflate support	# <zlib>

makeoptions	LIBDRIVER = "libDriver_kern.o"			# <libdriver>
makeoptions	LIBOBJC   = "libkobjc.o"			# <kernobjc>

maxusers	64		# <xlarge>
maxusers	50		# <large>
maxusers	32		# <medium>
maxusers	16		# <small>
maxusers	8		# <xsmall>
maxusers	2		# <bsmall>

#
#  Multi-processor selection
#
pseudo-device	cpus		64	# <multi64>
pseudo-device	cpus		32	# <multi32>
pseudo-device	cpus		16	# <multi16>
pseudo-device	cpus		2	# <multi2>
pseudo-device	cpus		1	# <!multi64,multi32,multi16,multi2>

#
#  configurable kernel event related resources 
#
options   CONFIG_KN_HASHSIZE=64		# <medium,large,xlarge>
options   CONFIG_KN_HASHSIZE=48		# <small,xsmall>
options   CONFIG_KN_HASHSIZE=20		# <bsmall>

#
#  configurable vfs related resources 
#  CONFIG_VNODES - used to pre allocate vnode related resources 
#  CONFIG_VNODE_FREE_MIN - mininmum number of free vnodes 
#  CONFIG_NC_HASH - name cache hash table allocation
#  CONFIG_VFS_NAMES - name strings
#
#  263168 magic number for medium CONFIG_VNODES is based on memory 
#  Number vnodes  is (memsize/64k) + 1024 
#  This is the calculation that is used by launchd in tiger
#  we are clipping the max based on 16G 
#  ie ((16*1024*1024*1024)/(64 *1024)) + 1024 = 263168;

options   CONFIG_VNODES=263168		# <large,xlarge>
options   CONFIG_VNODES=263168		# <medium>
options   CONFIG_VNODES=10240		# <small>
options   CONFIG_VNODES=1024		# <xsmall>
options   CONFIG_VNODES=640			# <bsmall>

options   CONFIG_VNODE_FREE_MIN=500		# <large,xlarge>
options   CONFIG_VNODE_FREE_MIN=300		# <medium>
options   CONFIG_VNODE_FREE_MIN=200		# <small>
options   CONFIG_VNODE_FREE_MIN=100		# <xsmall>
options   CONFIG_VNODE_FREE_MIN=75		# <bsmall>

options   CONFIG_NC_HASH=5120		# <large,xlarge>
options   CONFIG_NC_HASH=4096		# <medium>
options   CONFIG_NC_HASH=2048		# <small,xsmall>
options   CONFIG_NC_HASH=1024		# <bsmall>

options   CONFIG_VFS_NAMES=5120		# <large,xlarge>
options   CONFIG_VFS_NAMES=4096		# <medium>
options   CONFIG_VFS_NAMES=3072		# <small,xsmall>
options   CONFIG_VFS_NAMES=2048		# <bsmall>

#
#  configurable kauth credential related resources 
#
options   KAUTH_CRED_PRIMES_COUNT=7		# <medium,large,xlarge>
options   KAUTH_CRED_PRIMES_COUNT=3		# <bsmall,xsmall,small>

options   KAUTH_CRED_PRIMES="{97, 241, 397, 743, 1499, 3989, 7499}"		# <medium,large,xlarge>
options   KAUTH_CRED_PRIMES="{5, 17, 97}"								# <bsmall,xsmall,small>

#
#  configurable options for minumum number of buffers for kernel memory 
#
options   CONFIG_MIN_NBUF=256		# <medium,large,xlarge>
options   CONFIG_MIN_NBUF=128		# <small>
options   CONFIG_MIN_NBUF=80		# <xsmall>
options   CONFIG_MIN_NBUF=64		# <bsmall>

options   CONFIG_MIN_NIOBUF=128		# <medium,large,xlarge>
options   CONFIG_MIN_NIOBUF=64		# <xsmall,small>
options   CONFIG_MIN_NIOBUF=32		# <bsmall>

#
# set maximum space used for packet buffers
#
options        CONFIG_NMBCLUSTERS="((1024 * 1024) / MCLBYTES)"		# <large,xlarge>
options        CONFIG_NMBCLUSTERS="((1024 * 512) / MCLBYTES)"		# <medium>
options        CONFIG_NMBCLUSTERS="((1024 * 256) / MCLBYTES)"		# <bsmall,xsmall,small>

# set maximum space used for packet buffers
#
options        CONFIG_USESOCKTHRESHOLD=1		# <large,xlarge,medium>
options        CONFIG_USESOCKTHRESHOLD=0		# <bsmall,xsmall,small>

#
# Configure size of TCP hash table
#
options CONFIG_TCBHASHSIZE=4096		# <medium,large,xlarge>
options CONFIG_TCBHASHSIZE=128		# <xsmall,small,bsmall>

#
#  configurable async IO options 
#  CONFIG_AIO_MAX - system wide limit of async IO requests.
#  CONFIG_AIO_PROCESS_MAX - process limit of async IO requests.
#  CONFIG_AIO_THREAD_COUNT - number of async IO worker threads created.
#
options   CONFIG_AIO_MAX=360		# <xlarge>
options   CONFIG_AIO_MAX=180		# <large>
options   CONFIG_AIO_MAX=90			# <medium>
options   CONFIG_AIO_MAX=45			# <small>
options   CONFIG_AIO_MAX=20			# <xsmall>
options   CONFIG_AIO_MAX=10			# <bsmall>

options   CONFIG_AIO_PROCESS_MAX=64		# <xlarge>
options   CONFIG_AIO_PROCESS_MAX=32		# <large>
options   CONFIG_AIO_PROCESS_MAX=16		# <medium>
options   CONFIG_AIO_PROCESS_MAX=12		# <small>
options   CONFIG_AIO_PROCESS_MAX=8		# <xsmall>
options   CONFIG_AIO_PROCESS_MAX=4		# <bsmall>

options   CONFIG_AIO_THREAD_COUNT=16	# <xlarge>
options   CONFIG_AIO_THREAD_COUNT=8		# <large>
options   CONFIG_AIO_THREAD_COUNT=4		# <medium>
options   CONFIG_AIO_THREAD_COUNT=3		# <small>
options   CONFIG_AIO_THREAD_COUNT=2		# <xsmall,bsmall>

#
#  configurable kernel related resources (CONFIG_THREAD_MAX needs to stay in 
#  sync with osfmk/conf/MASTER until we fix the config system...) todo XXX
#
options   CONFIG_THREAD_MAX=2560		# <medium,large,xlarge>
options   CONFIG_THREAD_MAX=1536		# <small,xsmall>
options   CONFIG_THREAD_MAX=1024		# <bsmall>

options   CONFIG_MAXVIFS=32				# <medium,large,xlarge>
options   CONFIG_MAXVIFS=16				# <small,xsmall>
options   CONFIG_MAXVIFS=2				# <bsmall>

options   CONFIG_MFCTBLSIZ=256			# <medium,large,xlarge>
options   CONFIG_MFCTBLSIZ=128			# <small,xsmall>
options   CONFIG_MFCTBLSIZ=16			# <bsmall>

#
#  configurable kernel - use these options to strip strings from panic
#  and printf calls.
#  no_panic_str - saves around 50K of kernel footprint.
#  no_printf_str - saves around 45K of kernel footprint.
#
options   CONFIG_NO_PANIC_STRINGS		# <no_panic_str>
options   CONFIG_NO_PRINTF_STRINGS		# <no_printf_str>
options   CONFIG_NO_KPRINTF_STRINGS		# <no_kprintf_str>

#
# configurable kernel - general switch to say we are building for an
# embedded device
#
options   CONFIG_EMBEDDED			# <config_embedded>

#
# code decryption... used on embedded for app protection
# must be set in all the bsd/conf and osfmk/conf MASTER files
#
options		CONFIG_CODE_DECRYPTION	# <config_embedded>


#
#  Ethernet (ARP)
#
pseudo-device	ether			# <networking,inet,inet6,netat>
#
#  Network loopback device
#
pseudo-device	loop			# <networking,inet,inet6,netat>
#
#  UCB pseudo terminal service
#
pseudo-device  pty     512 init pty_init       # <xlarge>
pseudo-device  pty     256 init pty_init       # <large>
pseudo-device  pty     128 init pty_init       # <medium>
pseudo-device  pty      48 init pty_init       # <small>
pseudo-device  pty      16 init pty_init       # <xsmall>
pseudo-device  pty       8 init pty_init       # <bsmall>
#
# Cloning pseudo terminal service
#
pseudo-device	ptmx	1 init ptmx_init

#
# vnode device
#
pseudo-device  vndevice	   16       init    vndevice_init   # <xlarge>
pseudo-device  vndevice		8       init    vndevice_init   # <large>
pseudo-device  vndevice		4       init    vndevice_init   # <medium>
pseudo-device  vndevice		3       init    vndevice_init   # <small>
pseudo-device  vndevice		2       init    vndevice_init   # <bsmall>

#
# memory device
pseudo-device	mdevdevice	1	init	mdevinit

#
#
# packet filter device
#
pseudo-device	bpfilter	4	init	bpf_init		# <networking,inet,inet6,netat>

#
# fsevents device
pseudo-device	fsevents	1	init	fsevents_init	# <config_fse>

#
#  shim to "linux" mach disk drivers  (mach drivers must also be turned on)
#
# now using iokit disk shim, this is code is obsolete
#pseudo-device diskshim

pseudo-device	random		1	init	random_init
pseudo-device	dtrace		1	init	dtrace_init	# <config_dtrace>
pseudo-device	helper		1	init	helper_init	# <config_dtrace>
pseudo-device	lockstat	1	init	lockstat_init	# <config_dtrace>
pseudo-device	sdt		1	init	sdt_init	# <config_dtrace>
pseudo-device	systrace	1	init	systrace_init	# <config_dtrace>
pseudo-device	fbt		1	init	fbt_init	# <config_dtrace>
pseudo-device	profile_prvd	1	init	profile_init	# <config_dtrace>