]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * Copyright (c) 2000-2011 Apple Inc. All rights reserved. | |
3 | * | |
4 | * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ | |
5 | * | |
6 | * This file contains Original Code and/or Modifications of Original Code | |
7 | * as defined in and that are subject to the Apple Public Source License | |
8 | * Version 2.0 (the 'License'). You may not use this file except in | |
9 | * compliance with the License. The rights granted to you under the License | |
10 | * may not be used to create, or enable the creation or redistribution of, | |
11 | * unlawful or unlicensed copies of an Apple operating system, or to | |
12 | * circumvent, violate, or enable the circumvention or violation of, any | |
13 | * terms of an Apple operating system software license agreement. | |
14 | * | |
15 | * Please obtain a copy of the License at | |
16 | * http://www.opensource.apple.com/apsl/ and read it before using this file. | |
17 | * | |
18 | * The Original Code and all software distributed under the License are | |
19 | * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER | |
20 | * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, | |
21 | * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, | |
22 | * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. | |
23 | * Please see the License for the specific language governing rights and | |
24 | * limitations under the License. | |
25 | * | |
26 | * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ | |
27 | */ | |
28 | ||
29 | /* $FreeBSD: src/sys/netinet6/ip6_output.c,v 1.43 2002/10/31 19:45:48 ume Exp $ */ | |
30 | /* $KAME: ip6_output.c,v 1.279 2002/01/26 06:12:30 jinmei Exp $ */ | |
31 | ||
32 | /* | |
33 | * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. | |
34 | * All rights reserved. | |
35 | * | |
36 | * Redistribution and use in source and binary forms, with or without | |
37 | * modification, are permitted provided that the following conditions | |
38 | * are met: | |
39 | * 1. Redistributions of source code must retain the above copyright | |
40 | * notice, this list of conditions and the following disclaimer. | |
41 | * 2. Redistributions in binary form must reproduce the above copyright | |
42 | * notice, this list of conditions and the following disclaimer in the | |
43 | * documentation and/or other materials provided with the distribution. | |
44 | * 3. Neither the name of the project nor the names of its contributors | |
45 | * may be used to endorse or promote products derived from this software | |
46 | * without specific prior written permission. | |
47 | * | |
48 | * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND | |
49 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
50 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
51 | * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE | |
52 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
53 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
54 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
55 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
56 | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
57 | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
58 | * SUCH DAMAGE. | |
59 | */ | |
60 | ||
61 | /* | |
62 | * Copyright (c) 1982, 1986, 1988, 1990, 1993 | |
63 | * The Regents of the University of California. All rights reserved. | |
64 | * | |
65 | * Redistribution and use in source and binary forms, with or without | |
66 | * modification, are permitted provided that the following conditions | |
67 | * are met: | |
68 | * 1. Redistributions of source code must retain the above copyright | |
69 | * notice, this list of conditions and the following disclaimer. | |
70 | * 2. Redistributions in binary form must reproduce the above copyright | |
71 | * notice, this list of conditions and the following disclaimer in the | |
72 | * documentation and/or other materials provided with the distribution. | |
73 | * 3. All advertising materials mentioning features or use of this software | |
74 | * must display the following acknowledgement: | |
75 | * This product includes software developed by the University of | |
76 | * California, Berkeley and its contributors. | |
77 | * 4. Neither the name of the University nor the names of its contributors | |
78 | * may be used to endorse or promote products derived from this software | |
79 | * without specific prior written permission. | |
80 | * | |
81 | * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND | |
82 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
83 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
84 | * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE | |
85 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
86 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
87 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
88 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
89 | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
90 | * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
91 | * SUCH DAMAGE. | |
92 | * | |
93 | * @(#)ip_output.c 8.3 (Berkeley) 1/21/94 | |
94 | */ | |
95 | /* | |
96 | * NOTICE: This file was modified by SPARTA, Inc. in 2005 to introduce | |
97 | * support for mandatory and extensible security protections. This notice | |
98 | * is included in support of clause 2.2 (b) of the Apple Public License, | |
99 | * Version 2.0. | |
100 | */ | |
101 | ||
102 | #include <sys/param.h> | |
103 | #include <sys/malloc.h> | |
104 | #include <sys/mbuf.h> | |
105 | #include <sys/errno.h> | |
106 | #include <sys/protosw.h> | |
107 | #include <sys/socket.h> | |
108 | #include <sys/socketvar.h> | |
109 | #include <sys/systm.h> | |
110 | #include <sys/kernel.h> | |
111 | #include <sys/proc.h> | |
112 | #include <sys/kauth.h> | |
113 | #include <sys/mcache.h> | |
114 | #include <sys/sysctl.h> | |
115 | #include <kern/zalloc.h> | |
116 | ||
117 | #include <pexpert/pexpert.h> | |
118 | ||
119 | #include <net/if.h> | |
120 | #include <net/route.h> | |
121 | #include <net/dlil.h> | |
122 | ||
123 | #include <netinet/in.h> | |
124 | #include <netinet/in_var.h> | |
125 | #include <netinet/ip_var.h> | |
126 | #include <netinet6/in6_var.h> | |
127 | #include <netinet/ip6.h> | |
128 | #include <netinet6/ip6protosw.h> | |
129 | #include <netinet/icmp6.h> | |
130 | #include <netinet6/ip6_var.h> | |
131 | #include <netinet/in_pcb.h> | |
132 | #include <netinet6/nd6.h> | |
133 | #include <netinet6/scope6_var.h> | |
134 | #include <mach/sdt.h> | |
135 | ||
136 | #if IPSEC | |
137 | #include <netinet6/ipsec.h> | |
138 | #if INET6 | |
139 | #include <netinet6/ipsec6.h> | |
140 | #endif | |
141 | #include <netkey/key.h> | |
142 | extern int ipsec_bypass; | |
143 | #endif /* IPSEC */ | |
144 | ||
145 | #if CONFIG_MACF_NET | |
146 | #include <security/mac.h> | |
147 | #endif /* MAC_NET */ | |
148 | ||
149 | #include <netinet6/ip6_fw.h> | |
150 | ||
151 | #include <net/net_osdep.h> | |
152 | ||
153 | #include <netinet/kpi_ipfilter_var.h> | |
154 | ||
155 | #if PF | |
156 | #include <net/pfvar.h> | |
157 | #endif /* PF */ | |
158 | ||
159 | #ifndef __APPLE__ | |
160 | static MALLOC_DEFINE(M_IPMOPTS, "ip6_moptions", "internet multicast options"); | |
161 | #endif | |
162 | ||
163 | struct ip6_exthdrs { | |
164 | struct mbuf *ip6e_ip6; | |
165 | struct mbuf *ip6e_hbh; | |
166 | struct mbuf *ip6e_dest1; | |
167 | struct mbuf *ip6e_rthdr; | |
168 | struct mbuf *ip6e_dest2; | |
169 | }; | |
170 | ||
171 | int ip6_raw_ctloutput(struct socket *so, struct sockopt *sopt); | |
172 | static int ip6_pcbopts(struct ip6_pktopts **, struct mbuf *, | |
173 | struct socket *, struct sockopt *sopt); | |
174 | static int ip6_pcbopt(int optname, u_char *buf, int len, struct ip6_pktopts **pktopt, int uproto); | |
175 | static int ip6_getpcbopt(struct ip6_pktopts *pktopt, int optname, struct sockopt *sopt); | |
176 | static int ip6_setpktopt(int optname, u_char *buf, int len, struct ip6_pktopts *opt, int sticky, int cmsg, int uproto); | |
177 | static void im6o_trace(struct ip6_moptions *, int); | |
178 | static int ip6_copyexthdr(struct mbuf **, caddr_t, int); | |
179 | static int ip6_insertfraghdr(struct mbuf *, struct mbuf *, int, | |
180 | struct ip6_frag **); | |
181 | static int ip6_insert_jumboopt(struct ip6_exthdrs *, u_int32_t); | |
182 | static int ip6_splithdr(struct mbuf *, struct ip6_exthdrs *); | |
183 | static int ip6_getpmtu (struct route_in6 *, struct route_in6 *, | |
184 | struct ifnet *, struct in6_addr *, u_int32_t *, int *); | |
185 | ||
186 | #define IM6O_TRACE_HIST_SIZE 32 /* size of trace history */ | |
187 | ||
188 | /* For gdb */ | |
189 | __private_extern__ unsigned int im6o_trace_hist_size = IM6O_TRACE_HIST_SIZE; | |
190 | ||
191 | struct ip6_moptions_dbg { | |
192 | struct ip6_moptions im6o; /* ip6_moptions */ | |
193 | u_int16_t im6o_refhold_cnt; /* # of IM6O_ADDREF */ | |
194 | u_int16_t im6o_refrele_cnt; /* # of IM6O_REMREF */ | |
195 | /* | |
196 | * Alloc and free callers. | |
197 | */ | |
198 | ctrace_t im6o_alloc; | |
199 | ctrace_t im6o_free; | |
200 | /* | |
201 | * Circular lists of IM6O_ADDREF and IM6O_REMREF callers. | |
202 | */ | |
203 | ctrace_t im6o_refhold[IM6O_TRACE_HIST_SIZE]; | |
204 | ctrace_t im6o_refrele[IM6O_TRACE_HIST_SIZE]; | |
205 | }; | |
206 | ||
207 | #if DEBUG | |
208 | static unsigned int im6o_debug = 1; /* debugging (enabled) */ | |
209 | #else | |
210 | static unsigned int im6o_debug; /* debugging (disabled) */ | |
211 | #endif /* !DEBUG */ | |
212 | ||
213 | static unsigned int im6o_size; /* size of zone element */ | |
214 | static struct zone *im6o_zone; /* zone for ip6_moptions */ | |
215 | ||
216 | #define IM6O_ZONE_MAX 64 /* maximum elements in zone */ | |
217 | #define IM6O_ZONE_NAME "ip6_moptions" /* zone name */ | |
218 | ||
219 | ||
220 | /* | |
221 | * IP6 output. The packet in mbuf chain m contains a skeletal IP6 | |
222 | * header (with pri, len, nxt, hlim, src, dst). | |
223 | * This function may modify ver and hlim only. | |
224 | * The mbuf chain containing the packet will be freed. | |
225 | * The mbuf opt, if present, will not be freed. | |
226 | * | |
227 | * type of "mtu": rt_rmx.rmx_mtu is u_int32_t, ifnet.ifr_mtu is int, and | |
228 | * nd_ifinfo.linkmtu is u_int32_t. so we use u_int32_t to hold largest one, | |
229 | * which is rt_rmx.rmx_mtu. | |
230 | */ | |
231 | int | |
232 | ip6_output( | |
233 | struct mbuf *m0, | |
234 | struct ip6_pktopts *opt, | |
235 | struct route_in6 *ro, | |
236 | int flags, | |
237 | struct ip6_moptions *im6o, | |
238 | struct ifnet **ifpp, /* XXX: just for statistics */ | |
239 | struct ip6_out_args *ip6oa) | |
240 | { | |
241 | struct ip6_hdr *ip6, *mhip6; | |
242 | struct ifnet *ifp = NULL, *origifp = NULL; | |
243 | struct mbuf *m = m0; | |
244 | int hlen, tlen, len, off; | |
245 | struct route_in6 ip6route; | |
246 | struct rtentry *rt = NULL; | |
247 | struct sockaddr_in6 *dst, src_sa, dst_sa; | |
248 | int error = 0; | |
249 | struct in6_ifaddr *ia = NULL; | |
250 | u_int32_t mtu; | |
251 | int alwaysfrag = 0, dontfrag = 0; | |
252 | u_int32_t optlen = 0, plen = 0, unfragpartlen = 0; | |
253 | struct ip6_exthdrs exthdrs; | |
254 | struct in6_addr finaldst, src0, dst0; | |
255 | u_int32_t zone; | |
256 | struct route_in6 *ro_pmtu = NULL; | |
257 | int hdrsplit = 0; | |
258 | int needipsec = 0; | |
259 | ipfilter_t inject_filter_ref; | |
260 | int tso; | |
261 | unsigned int ifscope; | |
262 | unsigned int nocell; | |
263 | boolean_t select_srcif; | |
264 | struct ipf_pktopts *ippo = NULL, ipf_pktopts; | |
265 | u_int32_t ifmtu; | |
266 | ||
267 | #if IPSEC | |
268 | int needipsectun = 0; | |
269 | struct socket *so = NULL; | |
270 | struct secpolicy *sp = NULL; | |
271 | struct route_in6 *ipsec_saved_route = NULL; | |
272 | struct ipsec_output_state ipsec_state; | |
273 | ||
274 | bzero(&ipsec_state, sizeof(ipsec_state)); | |
275 | ||
276 | /* for AH processing. stupid to have "socket" variable in IP layer... */ | |
277 | if (ipsec_bypass == 0) | |
278 | { | |
279 | so = ipsec_getsocket(m); | |
280 | (void)ipsec_setsocket(m, NULL); | |
281 | } | |
282 | #endif /* IPSEC */ | |
283 | ||
284 | bzero(&ipf_pktopts, sizeof(struct ipf_pktopts)); | |
285 | ippo = &ipf_pktopts; | |
286 | ||
287 | ip6 = mtod(m, struct ip6_hdr *); | |
288 | inject_filter_ref = ipf_get_inject_filter(m); | |
289 | ||
290 | finaldst = ip6->ip6_dst; | |
291 | ||
292 | if (ip6_doscopedroute && (flags & IPV6_OUTARGS)) { | |
293 | select_srcif = !(flags & (IPV6_FORWARDING | IPV6_UNSPECSRC | IPV6_FLAG_NOSRCIFSEL)); | |
294 | ifscope = ip6oa->ip6oa_boundif; | |
295 | ipf_pktopts.ippo_flags = IPPOF_BOUND_IF; | |
296 | ipf_pktopts.ippo_flags |= (ifscope << IPPOF_SHIFT_IFSCOPE); | |
297 | } else { | |
298 | select_srcif = FALSE; | |
299 | ifscope = IFSCOPE_NONE; | |
300 | } | |
301 | ||
302 | if (flags & IPV6_OUTARGS) { | |
303 | nocell = ip6oa->ip6oa_nocell; | |
304 | if (nocell) | |
305 | ipf_pktopts.ippo_flags |= IPPOF_NO_IFT_CELLULAR; | |
306 | } else { | |
307 | nocell = 0; | |
308 | } | |
309 | ||
310 | #define MAKE_EXTHDR(hp, mp) \ | |
311 | do { \ | |
312 | if (hp) { \ | |
313 | struct ip6_ext *eh = (struct ip6_ext *)(hp); \ | |
314 | error = ip6_copyexthdr((mp), (caddr_t)(hp), \ | |
315 | ((eh)->ip6e_len + 1) << 3); \ | |
316 | if (error) \ | |
317 | goto freehdrs; \ | |
318 | } \ | |
319 | } while (0) | |
320 | ||
321 | bzero(&exthdrs, sizeof(exthdrs)); | |
322 | ||
323 | if (opt) { | |
324 | /* Hop-by-Hop options header */ | |
325 | MAKE_EXTHDR(opt->ip6po_hbh, &exthdrs.ip6e_hbh); | |
326 | /* Destination options header(1st part) */ | |
327 | if (opt->ip6po_rthdr) { | |
328 | /* | |
329 | * Destination options header(1st part) | |
330 | * This only makes sense with a routing header. | |
331 | * See Section 9.2 of RFC 3542. | |
332 | * Disabling this part just for MIP6 convenience is | |
333 | * a bad idea. We need to think carefully about a | |
334 | * way to make the advanced API coexist with MIP6 | |
335 | * options, which might automatically be inserted in | |
336 | * the kernel. | |
337 | */ | |
338 | MAKE_EXTHDR(opt->ip6po_dest1, &exthdrs.ip6e_dest1); | |
339 | } | |
340 | /* Routing header */ | |
341 | MAKE_EXTHDR(opt->ip6po_rthdr, &exthdrs.ip6e_rthdr); | |
342 | /* Destination options header(2nd part) */ | |
343 | MAKE_EXTHDR(opt->ip6po_dest2, &exthdrs.ip6e_dest2); | |
344 | } | |
345 | ||
346 | #if IPSEC | |
347 | if (ipsec_bypass != 0) | |
348 | goto skip_ipsec; | |
349 | ||
350 | /* get a security policy for this packet */ | |
351 | if (so == NULL) | |
352 | sp = ipsec6_getpolicybyaddr(m, IPSEC_DIR_OUTBOUND, 0, &error); | |
353 | else | |
354 | sp = ipsec6_getpolicybysock(m, IPSEC_DIR_OUTBOUND, so, &error); | |
355 | ||
356 | if (sp == NULL) { | |
357 | IPSEC_STAT_INCREMENT(ipsec6stat.out_inval); | |
358 | goto freehdrs; | |
359 | } | |
360 | ||
361 | error = 0; | |
362 | ||
363 | /* check policy */ | |
364 | switch (sp->policy) { | |
365 | case IPSEC_POLICY_DISCARD: | |
366 | case IPSEC_POLICY_GENERATE: | |
367 | /* | |
368 | * This packet is just discarded. | |
369 | */ | |
370 | IPSEC_STAT_INCREMENT(ipsec6stat.out_polvio); | |
371 | goto freehdrs; | |
372 | ||
373 | case IPSEC_POLICY_BYPASS: | |
374 | case IPSEC_POLICY_NONE: | |
375 | /* no need to do IPsec. */ | |
376 | needipsec = 0; | |
377 | break; | |
378 | ||
379 | case IPSEC_POLICY_IPSEC: | |
380 | if (sp->req == NULL) { | |
381 | /* acquire a policy */ | |
382 | error = key_spdacquire(sp); | |
383 | goto freehdrs; | |
384 | } | |
385 | needipsec = 1; | |
386 | break; | |
387 | ||
388 | case IPSEC_POLICY_ENTRUST: | |
389 | default: | |
390 | printf("ip6_output: Invalid policy found. %d\n", sp->policy); | |
391 | } | |
392 | skip_ipsec: | |
393 | #endif /* IPSEC */ | |
394 | ||
395 | /* | |
396 | * Calculate the total length of the extension header chain. | |
397 | * Keep the length of the unfragmentable part for fragmentation. | |
398 | */ | |
399 | optlen = 0; | |
400 | if (exthdrs.ip6e_hbh) | |
401 | optlen += exthdrs.ip6e_hbh->m_len; | |
402 | if (exthdrs.ip6e_dest1) | |
403 | optlen += exthdrs.ip6e_dest1->m_len; | |
404 | if (exthdrs.ip6e_rthdr) | |
405 | optlen += exthdrs.ip6e_rthdr->m_len; | |
406 | unfragpartlen = optlen + sizeof(struct ip6_hdr); | |
407 | ||
408 | /* NOTE: we don't add AH/ESP length here. do that later. */ | |
409 | if (exthdrs.ip6e_dest2) | |
410 | optlen += exthdrs.ip6e_dest2->m_len; | |
411 | ||
412 | ||
413 | if (needipsec && | |
414 | (m->m_pkthdr.csum_flags & CSUM_DELAY_IPV6_DATA) != 0) { | |
415 | in6_delayed_cksum(m, sizeof(struct ip6_hdr) + optlen); | |
416 | m->m_pkthdr.csum_flags &= ~CSUM_DELAY_IPV6_DATA; | |
417 | } | |
418 | ||
419 | /* | |
420 | * If we need IPsec, or there is at least one extension header, | |
421 | * separate IP6 header from the payload. | |
422 | */ | |
423 | if ((needipsec || optlen) && !hdrsplit) { | |
424 | if ((error = ip6_splithdr(m, &exthdrs)) != 0) { | |
425 | m = NULL; | |
426 | goto freehdrs; | |
427 | } | |
428 | m = exthdrs.ip6e_ip6; | |
429 | hdrsplit++; | |
430 | } | |
431 | ||
432 | /* adjust pointer */ | |
433 | ip6 = mtod(m, struct ip6_hdr *); | |
434 | ||
435 | /* adjust mbuf packet header length */ | |
436 | m->m_pkthdr.len += optlen; | |
437 | plen = m->m_pkthdr.len - sizeof(*ip6); | |
438 | ||
439 | /* If this is a jumbo payload, insert a jumbo payload option. */ | |
440 | if (plen > IPV6_MAXPACKET) { | |
441 | if (!hdrsplit) { | |
442 | if ((error = ip6_splithdr(m, &exthdrs)) != 0) { | |
443 | m = NULL; | |
444 | goto freehdrs; | |
445 | } | |
446 | m = exthdrs.ip6e_ip6; | |
447 | hdrsplit++; | |
448 | } | |
449 | /* adjust pointer */ | |
450 | ip6 = mtod(m, struct ip6_hdr *); | |
451 | if ((error = ip6_insert_jumboopt(&exthdrs, plen)) != 0) | |
452 | goto freehdrs; | |
453 | ip6->ip6_plen = 0; | |
454 | } else | |
455 | ip6->ip6_plen = htons(plen); | |
456 | ||
457 | /* | |
458 | * Concatenate headers and fill in next header fields. | |
459 | * Here we have, on "m" | |
460 | * IPv6 payload | |
461 | * and we insert headers accordingly. Finally, we should be getting: | |
462 | * IPv6 hbh dest1 rthdr ah* [esp* dest2 payload] | |
463 | * | |
464 | * during the header composing process, "m" points to IPv6 header. | |
465 | * "mprev" points to an extension header prior to esp. | |
466 | */ | |
467 | { | |
468 | u_char *nexthdrp = &ip6->ip6_nxt; | |
469 | struct mbuf *mprev = m; | |
470 | ||
471 | /* | |
472 | * we treat dest2 specially. this makes IPsec processing | |
473 | * much easier. the goal here is to make mprev point the | |
474 | * mbuf prior to dest2. | |
475 | * | |
476 | * result: IPv6 dest2 payload | |
477 | * m and mprev will point to IPv6 header. | |
478 | */ | |
479 | if (exthdrs.ip6e_dest2) { | |
480 | if (!hdrsplit) | |
481 | panic("assumption failed: hdr not split"); | |
482 | exthdrs.ip6e_dest2->m_next = m->m_next; | |
483 | m->m_next = exthdrs.ip6e_dest2; | |
484 | *mtod(exthdrs.ip6e_dest2, u_char *) = ip6->ip6_nxt; | |
485 | ip6->ip6_nxt = IPPROTO_DSTOPTS; | |
486 | } | |
487 | ||
488 | #define MAKE_CHAIN(m, mp, p, i)\ | |
489 | do {\ | |
490 | if (m) {\ | |
491 | if (!hdrsplit) \ | |
492 | panic("assumption failed: hdr not split"); \ | |
493 | *mtod((m), u_char *) = *(p);\ | |
494 | *(p) = (i);\ | |
495 | p = mtod((m), u_char *);\ | |
496 | (m)->m_next = (mp)->m_next;\ | |
497 | (mp)->m_next = (m);\ | |
498 | (mp) = (m);\ | |
499 | }\ | |
500 | } while (0) | |
501 | /* | |
502 | * result: IPv6 hbh dest1 rthdr dest2 payload | |
503 | * m will point to IPv6 header. mprev will point to the | |
504 | * extension header prior to dest2 (rthdr in the above case). | |
505 | */ | |
506 | MAKE_CHAIN(exthdrs.ip6e_hbh, mprev, | |
507 | nexthdrp, IPPROTO_HOPOPTS); | |
508 | MAKE_CHAIN(exthdrs.ip6e_dest1, mprev, | |
509 | nexthdrp, IPPROTO_DSTOPTS); | |
510 | MAKE_CHAIN(exthdrs.ip6e_rthdr, mprev, | |
511 | nexthdrp, IPPROTO_ROUTING); | |
512 | ||
513 | if (!TAILQ_EMPTY(&ipv6_filters)) { | |
514 | struct ipfilter *filter; | |
515 | int seen = (inject_filter_ref == 0); | |
516 | int fixscope = 0; | |
517 | ||
518 | if (im6o != NULL && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) { | |
519 | ippo->ippo_flags |= IPPOF_MCAST_OPTS; | |
520 | IM6O_LOCK(im6o); | |
521 | ippo->ippo_mcast_ifnet = im6o->im6o_multicast_ifp; | |
522 | ippo->ippo_mcast_ttl = im6o->im6o_multicast_hlim; | |
523 | ippo->ippo_mcast_loop = im6o->im6o_multicast_loop; | |
524 | IM6O_UNLOCK(im6o); | |
525 | } | |
526 | ||
527 | /* Hack: embed the scope_id in the destination */ | |
528 | if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_dst) && | |
529 | (ip6->ip6_dst.s6_addr16[1] == 0) && (ro != NULL)) { | |
530 | fixscope = 1; | |
531 | ip6->ip6_dst.s6_addr16[1] = htons(ro->ro_dst.sin6_scope_id); | |
532 | } | |
533 | { | |
534 | ipf_ref(); | |
535 | TAILQ_FOREACH(filter, &ipv6_filters, ipf_link) { | |
536 | /* | |
537 | * No need to proccess packet twice if we've | |
538 | * already seen it | |
539 | */ | |
540 | if (seen == 0) { | |
541 | if ((struct ipfilter *)inject_filter_ref == filter) | |
542 | seen = 1; | |
543 | } else if (filter->ipf_filter.ipf_output) { | |
544 | errno_t result; | |
545 | ||
546 | result = filter->ipf_filter.ipf_output(filter->ipf_filter.cookie, (mbuf_t*)&m, ippo); | |
547 | if (result == EJUSTRETURN) { | |
548 | ipf_unref(); | |
549 | goto done; | |
550 | } | |
551 | if (result != 0) { | |
552 | ipf_unref(); | |
553 | goto bad; | |
554 | } | |
555 | } | |
556 | } | |
557 | ipf_unref(); | |
558 | } | |
559 | ip6 = mtod(m, struct ip6_hdr *); | |
560 | /* Hack: cleanup embedded scope_id if we put it there */ | |
561 | if (fixscope) | |
562 | ip6->ip6_dst.s6_addr16[1] = 0; | |
563 | } | |
564 | ||
565 | #if IPSEC | |
566 | if (!needipsec) | |
567 | goto skip_ipsec2; | |
568 | ||
569 | /* | |
570 | * pointers after IPsec headers are not valid any more. | |
571 | * other pointers need a great care too. | |
572 | * (IPsec routines should not mangle mbufs prior to AH/ESP) | |
573 | */ | |
574 | exthdrs.ip6e_dest2 = NULL; | |
575 | ||
576 | { | |
577 | struct ip6_rthdr *rh = NULL; | |
578 | int segleft_org = 0; | |
579 | ||
580 | if (exthdrs.ip6e_rthdr) { | |
581 | rh = mtod(exthdrs.ip6e_rthdr, struct ip6_rthdr *); | |
582 | segleft_org = rh->ip6r_segleft; | |
583 | rh->ip6r_segleft = 0; | |
584 | } | |
585 | ||
586 | ipsec_state.m = m; | |
587 | error = ipsec6_output_trans(&ipsec_state, nexthdrp, mprev, sp, flags, | |
588 | &needipsectun); | |
589 | m = ipsec_state.m; | |
590 | if (error) { | |
591 | /* mbuf is already reclaimed in ipsec6_output_trans. */ | |
592 | m = NULL; | |
593 | switch (error) { | |
594 | case EHOSTUNREACH: | |
595 | case ENETUNREACH: | |
596 | case EMSGSIZE: | |
597 | case ENOBUFS: | |
598 | case ENOMEM: | |
599 | break; | |
600 | default: | |
601 | printf("ip6_output (ipsec): error code %d\n", error); | |
602 | /* fall through */ | |
603 | case ENOENT: | |
604 | /* don't show these error codes to the user */ | |
605 | error = 0; | |
606 | break; | |
607 | } | |
608 | goto bad; | |
609 | } | |
610 | if (exthdrs.ip6e_rthdr) { | |
611 | /* ah6_output doesn't modify mbuf chain */ | |
612 | rh->ip6r_segleft = segleft_org; | |
613 | } | |
614 | } | |
615 | } | |
616 | skip_ipsec2: | |
617 | #endif | |
618 | ||
619 | /* | |
620 | * If there is a routing header, replace the destination address field | |
621 | * with the first hop of the routing header. | |
622 | */ | |
623 | if (exthdrs.ip6e_rthdr) { | |
624 | struct ip6_rthdr *rh = | |
625 | (struct ip6_rthdr *)(mtod(exthdrs.ip6e_rthdr, | |
626 | struct ip6_rthdr *)); | |
627 | struct ip6_rthdr0 *rh0; | |
628 | struct in6_addr *addr; | |
629 | struct sockaddr_in6 sa; | |
630 | ||
631 | switch (rh->ip6r_type) { | |
632 | case IPV6_RTHDR_TYPE_0: | |
633 | rh0 = (struct ip6_rthdr0 *)rh; | |
634 | addr = (struct in6_addr *)(rh0 + 1); | |
635 | ||
636 | /* | |
637 | * construct a sockaddr_in6 form of | |
638 | * the first hop. | |
639 | * | |
640 | * XXX: we may not have enough | |
641 | * information about its scope zone; | |
642 | * there is no standard API to pass | |
643 | * the information from the | |
644 | * application. | |
645 | */ | |
646 | bzero(&sa, sizeof(sa)); | |
647 | sa.sin6_family = AF_INET6; | |
648 | sa.sin6_len = sizeof(sa); | |
649 | sa.sin6_addr = addr[0]; | |
650 | if ((error = sa6_embedscope(&sa, | |
651 | ip6_use_defzone)) != 0) { | |
652 | goto bad; | |
653 | } | |
654 | ip6->ip6_dst = sa.sin6_addr; | |
655 | bcopy(&addr[1], &addr[0], sizeof(struct in6_addr) | |
656 | * (rh0->ip6r0_segleft - 1)); | |
657 | addr[rh0->ip6r0_segleft - 1] = finaldst; | |
658 | /* XXX */ | |
659 | in6_clearscope(addr + rh0->ip6r0_segleft - 1); | |
660 | break; | |
661 | default: /* is it possible? */ | |
662 | error = EINVAL; | |
663 | goto bad; | |
664 | } | |
665 | } | |
666 | ||
667 | /* Source address validation */ | |
668 | if (IN6_IS_ADDR_UNSPECIFIED(&ip6->ip6_src) && | |
669 | (flags & IPV6_UNSPECSRC) == 0) { | |
670 | error = EOPNOTSUPP; | |
671 | ip6stat.ip6s_badscope++; | |
672 | goto bad; | |
673 | } | |
674 | if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_src)) { | |
675 | error = EOPNOTSUPP; | |
676 | ip6stat.ip6s_badscope++; | |
677 | goto bad; | |
678 | } | |
679 | ||
680 | ip6stat.ip6s_localout++; | |
681 | ||
682 | /* | |
683 | * Route packet. | |
684 | */ | |
685 | if (ro == 0) { | |
686 | ro = &ip6route; | |
687 | bzero((caddr_t)ro, sizeof(*ro)); | |
688 | } | |
689 | ro_pmtu = ro; | |
690 | if (opt && opt->ip6po_rthdr) | |
691 | ro = &opt->ip6po_route; | |
692 | dst = (struct sockaddr_in6 *)&ro->ro_dst; | |
693 | ||
694 | if (ro && ro->ro_rt) | |
695 | RT_LOCK_ASSERT_NOTHELD(ro->ro_rt); | |
696 | /* | |
697 | * if specified, try to fill in the traffic class field. | |
698 | * do not override if a non-zero value is already set. | |
699 | * we check the diffserv field and the ecn field separately. | |
700 | */ | |
701 | if (opt && opt->ip6po_tclass >= 0) { | |
702 | int mask = 0; | |
703 | ||
704 | if ((ip6->ip6_flow & htonl(0xfc << 20)) == 0) | |
705 | mask |= 0xfc; | |
706 | if ((ip6->ip6_flow & htonl(0x03 << 20)) == 0) | |
707 | mask |= 0x03; | |
708 | if (mask != 0) | |
709 | ip6->ip6_flow |= htonl((opt->ip6po_tclass & mask) << 20); | |
710 | } | |
711 | ||
712 | /* fill in or override the hop limit field, if necessary. */ | |
713 | if (opt && opt->ip6po_hlim != -1) | |
714 | ip6->ip6_hlim = opt->ip6po_hlim & 0xff; | |
715 | else if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) { | |
716 | if (im6o != NULL) { | |
717 | IM6O_LOCK(im6o); | |
718 | ip6->ip6_hlim = im6o->im6o_multicast_hlim; | |
719 | IM6O_UNLOCK(im6o); | |
720 | } else { | |
721 | ip6->ip6_hlim = ip6_defmcasthlim; | |
722 | } | |
723 | } | |
724 | ||
725 | /* | |
726 | * If there is a cached route, check that it is to the same | |
727 | * destination and is still up. If not, free it and try again. | |
728 | * Test rt_flags without holding rt_lock for performance reasons; | |
729 | * if the route is down it will hopefully be caught by the layer | |
730 | * below (since it uses this route as a hint) or during the | |
731 | * next transmit. | |
732 | */ | |
733 | if (ro->ro_rt != NULL && (!(ro->ro_rt->rt_flags & RTF_UP) || | |
734 | dst->sin6_family != AF_INET6 || | |
735 | !IN6_ARE_ADDR_EQUAL(&dst->sin6_addr, &ip6->ip6_dst) || | |
736 | ro->ro_rt->generation_id != route_generation)) { | |
737 | rtfree(ro->ro_rt); | |
738 | ro->ro_rt = NULL; | |
739 | } | |
740 | if (ro->ro_rt == NULL) { | |
741 | bzero(dst, sizeof(*dst)); | |
742 | dst->sin6_family = AF_INET6; | |
743 | dst->sin6_len = sizeof(struct sockaddr_in6); | |
744 | dst->sin6_addr = ip6->ip6_dst; | |
745 | } | |
746 | ||
747 | #if IPSEC | |
748 | if (needipsec && needipsectun) { | |
749 | #if CONFIG_DTRACE | |
750 | struct ifnet *trace_ifp = (ifpp != NULL) ? (*ifpp) : NULL; | |
751 | #endif /* CONFIG_DTRACE */ | |
752 | /* | |
753 | * All the extension headers will become inaccessible | |
754 | * (since they can be encrypted). | |
755 | * Don't panic, we need no more updates to extension headers | |
756 | * on inner IPv6 packet (since they are now encapsulated). | |
757 | * | |
758 | * IPv6 [ESP|AH] IPv6 [extension headers] payload | |
759 | */ | |
760 | bzero(&exthdrs, sizeof(exthdrs)); | |
761 | exthdrs.ip6e_ip6 = m; | |
762 | ||
763 | ipsec_state.m = m; | |
764 | route_copyout(&ipsec_state.ro, (struct route *)ro, sizeof(ipsec_state.ro)); | |
765 | ipsec_state.dst = (struct sockaddr *)dst; | |
766 | ||
767 | /* Added a trace here so that we can see packets inside a tunnel */ | |
768 | DTRACE_IP6(send, struct mbuf *, m, struct inpcb *, NULL, | |
769 | struct ip6_hdr *, ip6, struct ifnet *, trace_ifp, | |
770 | struct ip *, NULL, struct ip6_hdr *, ip6); | |
771 | ||
772 | error = ipsec6_output_tunnel(&ipsec_state, sp, flags); | |
773 | if (ipsec_state.tunneled == 4) /* tunneled in IPv4 - packet is gone */ | |
774 | goto done; | |
775 | m = ipsec_state.m; | |
776 | ipsec_saved_route = ro; | |
777 | ro = (struct route_in6 *)&ipsec_state.ro; | |
778 | dst = (struct sockaddr_in6 *)ipsec_state.dst; | |
779 | if (error) { | |
780 | /* mbuf is already reclaimed in ipsec6_output_tunnel. */ | |
781 | m0 = m = NULL; | |
782 | m = NULL; | |
783 | switch (error) { | |
784 | case EHOSTUNREACH: | |
785 | case ENETUNREACH: | |
786 | case EMSGSIZE: | |
787 | case ENOBUFS: | |
788 | case ENOMEM: | |
789 | break; | |
790 | default: | |
791 | printf("ip6_output (ipsec): error code %d\n", error); | |
792 | /* fall through */ | |
793 | case ENOENT: | |
794 | /* don't show these error codes to the user */ | |
795 | error = 0; | |
796 | break; | |
797 | } | |
798 | goto bad; | |
799 | } | |
800 | /* | |
801 | * The packet has been encapsulated so the ifscope is no longer valid | |
802 | * since it does not apply to the outer address: ignore the ifscope. | |
803 | */ | |
804 | ifscope = IFSCOPE_NONE; | |
805 | if (opt != NULL && opt->ip6po_pktinfo != NULL) { | |
806 | if (opt->ip6po_pktinfo->ipi6_ifindex != IFSCOPE_NONE) | |
807 | opt->ip6po_pktinfo->ipi6_ifindex = IFSCOPE_NONE; | |
808 | } | |
809 | exthdrs.ip6e_ip6 = m; | |
810 | } | |
811 | #endif /* IPSEC */ | |
812 | ||
813 | /* for safety */ | |
814 | if (ifp != NULL) { | |
815 | ifnet_release(ifp); | |
816 | ifp = NULL; | |
817 | } | |
818 | ||
819 | /* adjust pointer */ | |
820 | ip6 = mtod(m, struct ip6_hdr *); | |
821 | ||
822 | if (select_srcif) { | |
823 | bzero(&src_sa, sizeof(src_sa)); | |
824 | src_sa.sin6_family = AF_INET6; | |
825 | src_sa.sin6_len = sizeof(src_sa); | |
826 | src_sa.sin6_addr = ip6->ip6_src; | |
827 | } | |
828 | bzero(&dst_sa, sizeof(dst_sa)); | |
829 | dst_sa.sin6_family = AF_INET6; | |
830 | dst_sa.sin6_len = sizeof(dst_sa); | |
831 | dst_sa.sin6_addr = ip6->ip6_dst; | |
832 | ||
833 | if ((error = in6_selectroute(select_srcif ? &src_sa : NULL, | |
834 | &dst_sa, opt, im6o, ro, &ifp, &rt, 0, ifscope, nocell)) != 0) { | |
835 | switch (error) { | |
836 | case EHOSTUNREACH: | |
837 | ip6stat.ip6s_noroute++; | |
838 | break; | |
839 | case EADDRNOTAVAIL: | |
840 | default: | |
841 | break; /* XXX statistics? */ | |
842 | } | |
843 | if (ifp != NULL) | |
844 | in6_ifstat_inc(ifp, ifs6_out_discard); | |
845 | goto bad; | |
846 | } | |
847 | if (rt == NULL) { | |
848 | /* | |
849 | * If in6_selectroute() does not return a route entry, | |
850 | * dst may not have been updated. | |
851 | */ | |
852 | *dst = dst_sa; /* XXX */ | |
853 | } | |
854 | ||
855 | /* | |
856 | * then rt (for unicast) and ifp must be non-NULL valid values. | |
857 | */ | |
858 | if ((flags & IPV6_FORWARDING) == 0) { | |
859 | /* XXX: the FORWARDING flag can be set for mrouting. */ | |
860 | in6_ifstat_inc(ifp, ifs6_out_request); | |
861 | } | |
862 | if (rt != NULL) { | |
863 | RT_LOCK(rt); | |
864 | ia = (struct in6_ifaddr *)(rt->rt_ifa); | |
865 | if (ia != NULL) | |
866 | IFA_ADDREF(&ia->ia_ifa); | |
867 | rt->rt_use++; | |
868 | RT_UNLOCK(rt); | |
869 | } | |
870 | ||
871 | /* | |
872 | * The outgoing interface must be in the zone of source and | |
873 | * destination addresses. We should use ia_ifp to support the | |
874 | * case of sending packets to an address of our own. | |
875 | */ | |
876 | if (ia != NULL && ia->ia_ifp) { | |
877 | ifnet_reference(ia->ia_ifp); | |
878 | if (origifp != NULL) | |
879 | ifnet_release(origifp); | |
880 | origifp = ia->ia_ifp; | |
881 | } else { | |
882 | if (ifp != NULL) | |
883 | ifnet_reference(ifp); | |
884 | if (origifp != NULL) | |
885 | ifnet_release(origifp); | |
886 | origifp = ifp; | |
887 | } | |
888 | src0 = ip6->ip6_src; | |
889 | if (in6_setscope(&src0, origifp, &zone)) | |
890 | goto badscope; | |
891 | bzero(&src_sa, sizeof(src_sa)); | |
892 | src_sa.sin6_family = AF_INET6; | |
893 | src_sa.sin6_len = sizeof(src_sa); | |
894 | src_sa.sin6_addr = ip6->ip6_src; | |
895 | if (sa6_recoverscope(&src_sa) || zone != src_sa.sin6_scope_id) | |
896 | goto badscope; | |
897 | ||
898 | dst0 = ip6->ip6_dst; | |
899 | if (in6_setscope(&dst0, origifp, &zone)) | |
900 | goto badscope; | |
901 | /* re-initialize to be sure */ | |
902 | bzero(&dst_sa, sizeof(dst_sa)); | |
903 | dst_sa.sin6_family = AF_INET6; | |
904 | dst_sa.sin6_len = sizeof(dst_sa); | |
905 | dst_sa.sin6_addr = ip6->ip6_dst; | |
906 | if (sa6_recoverscope(&dst_sa) || zone != dst_sa.sin6_scope_id) { | |
907 | goto badscope; | |
908 | } | |
909 | ||
910 | /* scope check is done. */ | |
911 | goto routefound; | |
912 | ||
913 | badscope: | |
914 | ip6stat.ip6s_badscope++; | |
915 | in6_ifstat_inc(origifp, ifs6_out_discard); | |
916 | if (error == 0) | |
917 | error = EHOSTUNREACH; /* XXX */ | |
918 | goto bad; | |
919 | ||
920 | routefound: | |
921 | if (rt && !IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) { | |
922 | if (opt && opt->ip6po_nextroute.ro_rt) { | |
923 | /* | |
924 | * The nexthop is explicitly specified by the | |
925 | * application. We assume the next hop is an IPv6 | |
926 | * address. | |
927 | */ | |
928 | dst = (struct sockaddr_in6 *)opt->ip6po_nexthop; | |
929 | } | |
930 | else if ((rt->rt_flags & RTF_GATEWAY)) | |
931 | dst = (struct sockaddr_in6 *)rt->rt_gateway; | |
932 | } | |
933 | ||
934 | if (!IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) { | |
935 | m->m_flags &= ~(M_BCAST | M_MCAST); /* just in case */ | |
936 | } else { | |
937 | struct in6_multi *in6m; | |
938 | ||
939 | m->m_flags = (m->m_flags & ~M_BCAST) | M_MCAST; | |
940 | ||
941 | in6_ifstat_inc(ifp, ifs6_out_mcast); | |
942 | ||
943 | /* | |
944 | * Confirm that the outgoing interface supports multicast. | |
945 | */ | |
946 | if ((ifp->if_flags & IFF_MULTICAST) == 0) { | |
947 | ip6stat.ip6s_noroute++; | |
948 | in6_ifstat_inc(ifp, ifs6_out_discard); | |
949 | error = ENETUNREACH; | |
950 | goto bad; | |
951 | } | |
952 | in6_multihead_lock_shared(); | |
953 | IN6_LOOKUP_MULTI(&ip6->ip6_dst, ifp, in6m); | |
954 | in6_multihead_lock_done(); | |
955 | if (im6o != NULL) | |
956 | IM6O_LOCK(im6o); | |
957 | if (in6m != NULL && | |
958 | (im6o == NULL || im6o->im6o_multicast_loop)) { | |
959 | if (im6o != NULL) | |
960 | IM6O_UNLOCK(im6o); | |
961 | /* | |
962 | * If we belong to the destination multicast group | |
963 | * on the outgoing interface, and the caller did not | |
964 | * forbid loopback, loop back a copy. | |
965 | */ | |
966 | ip6_mloopback(ifp, m, dst); | |
967 | } else { | |
968 | if (im6o != NULL) | |
969 | IM6O_UNLOCK(im6o); | |
970 | /* | |
971 | * If we are acting as a multicast router, perform | |
972 | * multicast forwarding as if the packet had just | |
973 | * arrived on the interface to which we are about | |
974 | * to send. The multicast forwarding function | |
975 | * recursively calls this function, using the | |
976 | * IPV6_FORWARDING flag to prevent infinite recursion. | |
977 | * | |
978 | * Multicasts that are looped back by ip6_mloopback(), | |
979 | * above, will be forwarded by the ip6_input() routine, | |
980 | * if necessary. | |
981 | */ | |
982 | #if MROUTING | |
983 | if (ip6_mrouter && (flags & IPV6_FORWARDING) == 0) { | |
984 | /* | |
985 | * XXX: ip6_mforward expects that rcvif is NULL | |
986 | * when it is called from the originating path. | |
987 | * However, it is not always the case, since | |
988 | * some versions of MGETHDR() does not | |
989 | * initialize the field. | |
990 | */ | |
991 | m->m_pkthdr.rcvif = NULL; | |
992 | if (ip6_mforward(ip6, ifp, m) != 0) { | |
993 | m_freem(m); | |
994 | if (in6m != NULL) | |
995 | IN6M_REMREF(in6m); | |
996 | goto done; | |
997 | } | |
998 | } | |
999 | #endif | |
1000 | } | |
1001 | if (in6m != NULL) | |
1002 | IN6M_REMREF(in6m); | |
1003 | /* | |
1004 | * Multicasts with a hoplimit of zero may be looped back, | |
1005 | * above, but must not be transmitted on a network. | |
1006 | * Also, multicasts addressed to the loopback interface | |
1007 | * are not sent -- the above call to ip6_mloopback() will | |
1008 | * loop back a copy if this host actually belongs to the | |
1009 | * destination group on the loopback interface. | |
1010 | */ | |
1011 | if (ip6->ip6_hlim == 0 || (ifp->if_flags & IFF_LOOPBACK) || | |
1012 | IN6_IS_ADDR_MC_INTFACELOCAL(&ip6->ip6_dst)) { | |
1013 | m_freem(m); | |
1014 | goto done; | |
1015 | } | |
1016 | } | |
1017 | ||
1018 | /* | |
1019 | * Fill the outgoing inteface to tell the upper layer | |
1020 | * to increment per-interface statistics. | |
1021 | */ | |
1022 | if (ifpp != NULL) { | |
1023 | ifnet_reference(ifp); /* for caller */ | |
1024 | if (*ifpp != NULL) | |
1025 | ifnet_release(*ifpp); | |
1026 | *ifpp = ifp; | |
1027 | } | |
1028 | ||
1029 | /* Determine path MTU. */ | |
1030 | if ((error = ip6_getpmtu(ro_pmtu, ro, ifp, &finaldst, &mtu, | |
1031 | &alwaysfrag)) != 0) | |
1032 | goto bad; | |
1033 | ||
1034 | /* | |
1035 | * The caller of this function may specify to use the minimum MTU | |
1036 | * in some cases. | |
1037 | * An advanced API option (IPV6_USE_MIN_MTU) can also override MTU | |
1038 | * setting. The logic is a bit complicated; by default, unicast | |
1039 | * packets will follow path MTU while multicast packets will be sent at | |
1040 | * the minimum MTU. If IP6PO_MINMTU_ALL is specified, all packets | |
1041 | * including unicast ones will be sent at the minimum MTU. Multicast | |
1042 | * packets will always be sent at the minimum MTU unless | |
1043 | * IP6PO_MINMTU_DISABLE is explicitly specified. | |
1044 | * See RFC 3542 for more details. | |
1045 | */ | |
1046 | if (mtu > IPV6_MMTU) { | |
1047 | if ((flags & IPV6_MINMTU)) | |
1048 | mtu = IPV6_MMTU; | |
1049 | else if (opt && opt->ip6po_minmtu == IP6PO_MINMTU_ALL) | |
1050 | mtu = IPV6_MMTU; | |
1051 | else if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst) && | |
1052 | (opt == NULL || | |
1053 | opt->ip6po_minmtu != IP6PO_MINMTU_DISABLE)) { | |
1054 | mtu = IPV6_MMTU; | |
1055 | } | |
1056 | } | |
1057 | ||
1058 | /* | |
1059 | * clear embedded scope identifiers if necessary. | |
1060 | * in6_clearscope will touch the addresses only when necessary. | |
1061 | */ | |
1062 | in6_clearscope(&ip6->ip6_src); | |
1063 | in6_clearscope(&ip6->ip6_dst); | |
1064 | ||
1065 | #if IPFW2 | |
1066 | /* | |
1067 | * Check with the firewall... | |
1068 | */ | |
1069 | if (ip6_fw_enable && ip6_fw_chk_ptr) { | |
1070 | u_short port = 0; | |
1071 | m->m_pkthdr.rcvif = NULL; /* XXX */ | |
1072 | /* If ipfw says divert, we have to just drop packet */ | |
1073 | if (ip6_fw_chk_ptr(&ip6, ifp, &port, &m)) { | |
1074 | m_freem(m); | |
1075 | goto done; | |
1076 | } | |
1077 | if (!m) { | |
1078 | error = EACCES; | |
1079 | goto done; | |
1080 | } | |
1081 | } | |
1082 | #endif | |
1083 | ||
1084 | /* | |
1085 | * If the outgoing packet contains a hop-by-hop options header, | |
1086 | * it must be examined and processed even by the source node. | |
1087 | * (RFC 2460, section 4.) | |
1088 | */ | |
1089 | if (exthdrs.ip6e_hbh) { | |
1090 | struct ip6_hbh *hbh = mtod(exthdrs.ip6e_hbh, struct ip6_hbh *); | |
1091 | u_int32_t dummy; /* XXX unused */ | |
1092 | ||
1093 | #if DIAGNOSTIC | |
1094 | if ((hbh->ip6h_len + 1) << 3 > exthdrs.ip6e_hbh->m_len) | |
1095 | panic("ip6e_hbh is not continuous"); | |
1096 | #endif | |
1097 | /* | |
1098 | * XXX: if we have to send an ICMPv6 error to the sender, | |
1099 | * we need the M_LOOP flag since icmp6_error() expects | |
1100 | * the IPv6 and the hop-by-hop options header are | |
1101 | * continuous unless the flag is set. | |
1102 | */ | |
1103 | m->m_flags |= M_LOOP; | |
1104 | m->m_pkthdr.rcvif = ifp; | |
1105 | if (ip6_process_hopopts(m, (u_int8_t *)(hbh + 1), | |
1106 | ((hbh->ip6h_len + 1) << 3) - sizeof(struct ip6_hbh), | |
1107 | &dummy, &plen) < 0) { | |
1108 | /* m was already freed at this point */ | |
1109 | error = EINVAL;/* better error? */ | |
1110 | goto done; | |
1111 | } | |
1112 | m->m_flags &= ~M_LOOP; /* XXX */ | |
1113 | m->m_pkthdr.rcvif = NULL; | |
1114 | } | |
1115 | ||
1116 | #if PF | |
1117 | if (PF_IS_ENABLED) { | |
1118 | /* Invoke outbound packet filter */ | |
1119 | error = pf_af_hook(ifp, NULL, &m, AF_INET6, FALSE); | |
1120 | ||
1121 | if (error) { | |
1122 | if (m != NULL) { | |
1123 | panic("%s: unexpected packet %p\n", __func__, m); | |
1124 | /* NOTREACHED */ | |
1125 | } | |
1126 | /* Already freed by callee */ | |
1127 | goto done; | |
1128 | } | |
1129 | ip6 = mtod(m, struct ip6_hdr *); | |
1130 | } | |
1131 | #endif /* PF */ | |
1132 | ||
1133 | /* | |
1134 | * Send the packet to the outgoing interface. | |
1135 | * If necessary, do IPv6 fragmentation before sending. | |
1136 | * | |
1137 | * the logic here is rather complex: | |
1138 | * 1: normal case (dontfrag == 0, alwaysfrag == 0) | |
1139 | * 1-a: send as is if tlen <= path mtu | |
1140 | * 1-b: fragment if tlen > path mtu | |
1141 | * | |
1142 | * 2: if user asks us not to fragment (dontfrag == 1) | |
1143 | * 2-a: send as is if tlen <= interface mtu | |
1144 | * 2-b: error if tlen > interface mtu | |
1145 | * | |
1146 | * 3: if we always need to attach fragment header (alwaysfrag == 1) | |
1147 | * always fragment | |
1148 | * | |
1149 | * 4: if dontfrag == 1 && alwaysfrag == 1 | |
1150 | * error, as we cannot handle this conflicting request | |
1151 | */ | |
1152 | tlen = m->m_pkthdr.len; | |
1153 | ||
1154 | if (opt && (opt->ip6po_flags & IP6PO_DONTFRAG)) | |
1155 | dontfrag = 1; | |
1156 | else | |
1157 | dontfrag = 0; | |
1158 | if (dontfrag && alwaysfrag) { /* case 4 */ | |
1159 | /* conflicting request - can't transmit */ | |
1160 | error = EMSGSIZE; | |
1161 | goto bad; | |
1162 | } | |
1163 | ||
1164 | lck_rw_lock_shared(nd_if_rwlock); | |
1165 | ifmtu = IN6_LINKMTU(ifp); | |
1166 | lck_rw_done(nd_if_rwlock); | |
1167 | ||
1168 | if (dontfrag && tlen > ifmtu) { /* case 2-b */ | |
1169 | /* | |
1170 | * Even if the DONTFRAG option is specified, we cannot send the | |
1171 | * packet when the data length is larger than the MTU of the | |
1172 | * outgoing interface. | |
1173 | * Notify the error by sending IPV6_PATHMTU ancillary data as | |
1174 | * well as returning an error code (the latter is not described | |
1175 | * in the API spec.) | |
1176 | */ | |
1177 | u_int32_t mtu32; | |
1178 | struct ip6ctlparam ip6cp; | |
1179 | ||
1180 | mtu32 = (u_int32_t)mtu; | |
1181 | bzero(&ip6cp, sizeof(ip6cp)); | |
1182 | ip6cp.ip6c_cmdarg = (void *)&mtu32; | |
1183 | pfctlinput2(PRC_MSGSIZE, (struct sockaddr *)&ro_pmtu->ro_dst, | |
1184 | (void *)&ip6cp); | |
1185 | ||
1186 | error = EMSGSIZE; | |
1187 | goto bad; | |
1188 | } | |
1189 | ||
1190 | /* | |
1191 | * transmit packet without fragmentation | |
1192 | */ | |
1193 | tso = (ifp->if_hwassist & IFNET_TSO_IPV6) && | |
1194 | (m->m_pkthdr.csum_flags & CSUM_TSO_IPV6); | |
1195 | if (dontfrag || (!alwaysfrag && /* case 1-a and 2-a */ | |
1196 | (tlen <= mtu || tso || (ifp->if_hwassist & CSUM_FRAGMENT_IPV6)))) { | |
1197 | int sw_csum; | |
1198 | ||
1199 | ip6 = mtod(m, struct ip6_hdr *); | |
1200 | #ifdef IPSEC | |
1201 | /* clean ipsec history once it goes out of the node */ | |
1202 | ipsec_delaux(m); | |
1203 | #endif | |
1204 | ||
1205 | if (apple_hwcksum_tx == 0) /* Do not let HW handle cksum */ | |
1206 | sw_csum = m->m_pkthdr.csum_flags; | |
1207 | else | |
1208 | sw_csum = m->m_pkthdr.csum_flags & | |
1209 | ~IF_HWASSIST_CSUM_FLAGS(ifp->if_hwassist); | |
1210 | ||
1211 | if ((sw_csum & CSUM_DELAY_IPV6_DATA) != 0) { | |
1212 | in6_delayed_cksum(m, sizeof(struct ip6_hdr) + optlen); | |
1213 | m->m_pkthdr.csum_flags &= ~CSUM_DELAY_IPV6_DATA; | |
1214 | } | |
1215 | if (ro->ro_rt) | |
1216 | RT_LOCK_ASSERT_NOTHELD(ro->ro_rt); | |
1217 | error = nd6_output(ifp, origifp, m, dst, ro->ro_rt); | |
1218 | goto done; | |
1219 | } | |
1220 | ||
1221 | /* | |
1222 | * try to fragment the packet. case 1-b and 3 | |
1223 | */ | |
1224 | if (mtu < IPV6_MMTU) { | |
1225 | /* path MTU cannot be less than IPV6_MMTU */ | |
1226 | error = EMSGSIZE; | |
1227 | in6_ifstat_inc(ifp, ifs6_out_fragfail); | |
1228 | goto bad; | |
1229 | } else if (ip6->ip6_plen == 0) { | |
1230 | /* jumbo payload cannot be fragmented */ | |
1231 | error = EMSGSIZE; | |
1232 | in6_ifstat_inc(ifp, ifs6_out_fragfail); | |
1233 | goto bad; | |
1234 | } else { | |
1235 | struct mbuf **mnext, *m_frgpart; | |
1236 | struct ip6_frag *ip6f; | |
1237 | u_int32_t id = htonl(ip6_randomid()); | |
1238 | u_char nextproto; | |
1239 | ||
1240 | /* | |
1241 | * Too large for the destination or interface; | |
1242 | * fragment if possible. | |
1243 | * Must be able to put at least 8 bytes per fragment. | |
1244 | */ | |
1245 | hlen = unfragpartlen; | |
1246 | if (mtu > IPV6_MAXPACKET) | |
1247 | mtu = IPV6_MAXPACKET; | |
1248 | ||
1249 | len = (mtu - hlen - sizeof(struct ip6_frag)) & ~7; | |
1250 | if (len < 8) { | |
1251 | error = EMSGSIZE; | |
1252 | in6_ifstat_inc(ifp, ifs6_out_fragfail); | |
1253 | goto bad; | |
1254 | } | |
1255 | ||
1256 | mnext = &m->m_nextpkt; | |
1257 | ||
1258 | /* | |
1259 | * Change the next header field of the last header in the | |
1260 | * unfragmentable part. | |
1261 | */ | |
1262 | if (exthdrs.ip6e_rthdr) { | |
1263 | nextproto = *mtod(exthdrs.ip6e_rthdr, u_char *); | |
1264 | *mtod(exthdrs.ip6e_rthdr, u_char *) = IPPROTO_FRAGMENT; | |
1265 | } else if (exthdrs.ip6e_dest1) { | |
1266 | nextproto = *mtod(exthdrs.ip6e_dest1, u_char *); | |
1267 | *mtod(exthdrs.ip6e_dest1, u_char *) = IPPROTO_FRAGMENT; | |
1268 | } else if (exthdrs.ip6e_hbh) { | |
1269 | nextproto = *mtod(exthdrs.ip6e_hbh, u_char *); | |
1270 | *mtod(exthdrs.ip6e_hbh, u_char *) = IPPROTO_FRAGMENT; | |
1271 | } else { | |
1272 | nextproto = ip6->ip6_nxt; | |
1273 | ip6->ip6_nxt = IPPROTO_FRAGMENT; | |
1274 | } | |
1275 | ||
1276 | if ((m->m_pkthdr.csum_flags & CSUM_DELAY_IPV6_DATA) != 0) { | |
1277 | in6_delayed_cksum(m, sizeof(struct ip6_hdr) + optlen); | |
1278 | m->m_pkthdr.csum_flags &= ~CSUM_DELAY_IPV6_DATA; | |
1279 | } | |
1280 | ||
1281 | /* | |
1282 | * Loop through length of segment after first fragment, | |
1283 | * make new header and copy data of each part and link onto | |
1284 | * chain. | |
1285 | */ | |
1286 | m0 = m; | |
1287 | for (off = hlen; off < tlen; off += len) { | |
1288 | MGETHDR(m, M_DONTWAIT, MT_HEADER); /* MAC-OK */ | |
1289 | if (!m) { | |
1290 | error = ENOBUFS; | |
1291 | ip6stat.ip6s_odropped++; | |
1292 | goto sendorfree; | |
1293 | } | |
1294 | m->m_pkthdr.rcvif = NULL; | |
1295 | m->m_flags = m0->m_flags & M_COPYFLAGS; | |
1296 | *mnext = m; | |
1297 | mnext = &m->m_nextpkt; | |
1298 | m->m_data += max_linkhdr; | |
1299 | mhip6 = mtod(m, struct ip6_hdr *); | |
1300 | *mhip6 = *ip6; | |
1301 | m->m_len = sizeof(*mhip6); | |
1302 | error = ip6_insertfraghdr(m0, m, hlen, &ip6f); | |
1303 | if (error) { | |
1304 | ip6stat.ip6s_odropped++; | |
1305 | goto sendorfree; | |
1306 | } | |
1307 | ip6f->ip6f_offlg = htons((u_short)((off - hlen) & ~7)); | |
1308 | if (off + len >= tlen) | |
1309 | len = tlen - off; | |
1310 | else | |
1311 | ip6f->ip6f_offlg |= IP6F_MORE_FRAG; | |
1312 | mhip6->ip6_plen = htons((u_short)(len + hlen + | |
1313 | sizeof(*ip6f) - | |
1314 | sizeof(struct ip6_hdr))); | |
1315 | if ((m_frgpart = m_copy(m0, off, len)) == 0) { | |
1316 | error = ENOBUFS; | |
1317 | ip6stat.ip6s_odropped++; | |
1318 | goto sendorfree; | |
1319 | } | |
1320 | m_cat(m, m_frgpart); | |
1321 | m->m_pkthdr.len = len + hlen + sizeof(*ip6f); | |
1322 | m->m_pkthdr.rcvif = 0; | |
1323 | m->m_pkthdr.socket_id = m0->m_pkthdr.socket_id; | |
1324 | #ifdef __darwin8_notyet | |
1325 | #if CONFIG_MACF_NET | |
1326 | mac_create_fragment(m0, m); | |
1327 | #endif | |
1328 | #endif | |
1329 | ip6f->ip6f_reserved = 0; | |
1330 | ip6f->ip6f_ident = id; | |
1331 | ip6f->ip6f_nxt = nextproto; | |
1332 | ip6stat.ip6s_ofragments++; | |
1333 | in6_ifstat_inc(ifp, ifs6_out_fragcreat); | |
1334 | } | |
1335 | ||
1336 | in6_ifstat_inc(ifp, ifs6_out_fragok); | |
1337 | } | |
1338 | ||
1339 | /* | |
1340 | * Remove leading garbages. | |
1341 | */ | |
1342 | sendorfree: | |
1343 | m = m0->m_nextpkt; | |
1344 | m0->m_nextpkt = 0; | |
1345 | m_freem(m0); | |
1346 | for (m0 = m; m; m = m0) { | |
1347 | m0 = m->m_nextpkt; | |
1348 | m->m_nextpkt = 0; | |
1349 | if (error == 0) { | |
1350 | /* Record statistics for this interface address. */ | |
1351 | if (ia) { | |
1352 | #ifndef __APPLE__ | |
1353 | ia->ia_ifa.if_opackets++; | |
1354 | ia->ia_ifa.if_obytes += m->m_pkthdr.len; | |
1355 | #endif | |
1356 | } | |
1357 | #if IPSEC | |
1358 | /* clean ipsec history once it goes out of the node */ | |
1359 | ipsec_delaux(m); | |
1360 | #endif | |
1361 | error = nd6_output(ifp, origifp, m, dst, ro->ro_rt); | |
1362 | ||
1363 | } else | |
1364 | m_freem(m); | |
1365 | } | |
1366 | ||
1367 | if (error == 0) | |
1368 | ip6stat.ip6s_fragmented++; | |
1369 | ||
1370 | done: | |
1371 | #if IPSEC | |
1372 | if (ipsec_saved_route) { | |
1373 | ro = ipsec_saved_route; | |
1374 | if (ipsec_state.ro.ro_rt) { | |
1375 | rtfree(ipsec_state.ro.ro_rt); | |
1376 | } | |
1377 | } | |
1378 | #endif /* IPSEC */ | |
1379 | if (ro == &ip6route && ro->ro_rt) { /* brace necessary for rtfree */ | |
1380 | rtfree(ro->ro_rt); | |
1381 | } else if (ro_pmtu == &ip6route && ro_pmtu->ro_rt) { | |
1382 | rtfree(ro_pmtu->ro_rt); | |
1383 | } | |
1384 | ||
1385 | #if IPSEC | |
1386 | if (sp != NULL) | |
1387 | key_freesp(sp, KEY_SADB_UNLOCKED); | |
1388 | #endif /* IPSEC */ | |
1389 | ||
1390 | if (ia != NULL) | |
1391 | IFA_REMREF(&ia->ia_ifa); | |
1392 | if (ifp != NULL) | |
1393 | ifnet_release(ifp); | |
1394 | if (origifp != NULL) | |
1395 | ifnet_release(origifp); | |
1396 | return (error); | |
1397 | ||
1398 | freehdrs: | |
1399 | m_freem(exthdrs.ip6e_hbh); /* m_freem will check if mbuf is 0 */ | |
1400 | m_freem(exthdrs.ip6e_dest1); | |
1401 | m_freem(exthdrs.ip6e_rthdr); | |
1402 | m_freem(exthdrs.ip6e_dest2); | |
1403 | /* fall through */ | |
1404 | bad: | |
1405 | m_freem(m); | |
1406 | goto done; | |
1407 | } | |
1408 | ||
1409 | static int | |
1410 | ip6_copyexthdr(mp, hdr, hlen) | |
1411 | struct mbuf **mp; | |
1412 | caddr_t hdr; | |
1413 | int hlen; | |
1414 | { | |
1415 | struct mbuf *m; | |
1416 | ||
1417 | if (hlen > MCLBYTES) | |
1418 | return(ENOBUFS); /* XXX */ | |
1419 | ||
1420 | MGET(m, M_DONTWAIT, MT_DATA); | |
1421 | if (!m) | |
1422 | return(ENOBUFS); | |
1423 | ||
1424 | if (hlen > MLEN) { | |
1425 | MCLGET(m, M_DONTWAIT); | |
1426 | if ((m->m_flags & M_EXT) == 0) { | |
1427 | m_free(m); | |
1428 | return (ENOBUFS); | |
1429 | } | |
1430 | } | |
1431 | m->m_len = hlen; | |
1432 | if (hdr) | |
1433 | bcopy(hdr, mtod(m, caddr_t), hlen); | |
1434 | ||
1435 | *mp = m; | |
1436 | return (0); | |
1437 | } | |
1438 | ||
1439 | /* | |
1440 | * Process a delayed payload checksum calculation. | |
1441 | */ | |
1442 | void | |
1443 | in6_delayed_cksum(struct mbuf *m, uint16_t offset) | |
1444 | { | |
1445 | uint16_t csum; | |
1446 | ||
1447 | csum = in6_cksum(m, 0, offset, m->m_pkthdr.len - offset); | |
1448 | if (csum == 0 && (m->m_pkthdr.csum_flags & CSUM_UDPIPV6) != 0) { | |
1449 | csum = 0xffff; | |
1450 | } | |
1451 | ||
1452 | offset += (m->m_pkthdr.csum_data & 0xffff); | |
1453 | if ((offset + sizeof(csum)) > m->m_len) { | |
1454 | m_copyback(m, offset, sizeof(csum), &csum); | |
1455 | } else { | |
1456 | *(uint16_t *)(mtod(m, char *) + offset) = csum; | |
1457 | } | |
1458 | } | |
1459 | /* | |
1460 | * Insert jumbo payload option. | |
1461 | */ | |
1462 | static int | |
1463 | ip6_insert_jumboopt(exthdrs, plen) | |
1464 | struct ip6_exthdrs *exthdrs; | |
1465 | u_int32_t plen; | |
1466 | { | |
1467 | struct mbuf *mopt; | |
1468 | u_char *optbuf; | |
1469 | u_int32_t v; | |
1470 | ||
1471 | #define JUMBOOPTLEN 8 /* length of jumbo payload option and padding */ | |
1472 | ||
1473 | /* | |
1474 | * If there is no hop-by-hop options header, allocate new one. | |
1475 | * If there is one but it doesn't have enough space to store the | |
1476 | * jumbo payload option, allocate a cluster to store the whole options. | |
1477 | * Otherwise, use it to store the options. | |
1478 | */ | |
1479 | if (exthdrs->ip6e_hbh == 0) { | |
1480 | MGET(mopt, M_DONTWAIT, MT_DATA); | |
1481 | if (mopt == 0) | |
1482 | return (ENOBUFS); | |
1483 | mopt->m_len = JUMBOOPTLEN; | |
1484 | optbuf = mtod(mopt, u_char *); | |
1485 | optbuf[1] = 0; /* = ((JUMBOOPTLEN) >> 3) - 1 */ | |
1486 | exthdrs->ip6e_hbh = mopt; | |
1487 | } else { | |
1488 | struct ip6_hbh *hbh; | |
1489 | ||
1490 | mopt = exthdrs->ip6e_hbh; | |
1491 | if (M_TRAILINGSPACE(mopt) < JUMBOOPTLEN) { | |
1492 | /* | |
1493 | * XXX assumption: | |
1494 | * - exthdrs->ip6e_hbh is not referenced from places | |
1495 | * other than exthdrs. | |
1496 | * - exthdrs->ip6e_hbh is not an mbuf chain. | |
1497 | */ | |
1498 | u_int32_t oldoptlen = mopt->m_len; | |
1499 | struct mbuf *n; | |
1500 | ||
1501 | /* | |
1502 | * XXX: give up if the whole (new) hbh header does | |
1503 | * not fit even in an mbuf cluster. | |
1504 | */ | |
1505 | if (oldoptlen + JUMBOOPTLEN > MCLBYTES) | |
1506 | return (ENOBUFS); | |
1507 | ||
1508 | /* | |
1509 | * As a consequence, we must always prepare a cluster | |
1510 | * at this point. | |
1511 | */ | |
1512 | MGET(n, M_DONTWAIT, MT_DATA); | |
1513 | if (n) { | |
1514 | MCLGET(n, M_DONTWAIT); | |
1515 | if ((n->m_flags & M_EXT) == 0) { | |
1516 | m_freem(n); | |
1517 | n = NULL; | |
1518 | } | |
1519 | } | |
1520 | if (!n) | |
1521 | return (ENOBUFS); | |
1522 | n->m_len = oldoptlen + JUMBOOPTLEN; | |
1523 | bcopy(mtod(mopt, caddr_t), mtod(n, caddr_t), | |
1524 | oldoptlen); | |
1525 | optbuf = mtod(n, u_char *) + oldoptlen; | |
1526 | m_freem(mopt); | |
1527 | mopt = exthdrs->ip6e_hbh = n; | |
1528 | } else { | |
1529 | optbuf = mtod(mopt, u_char *) + mopt->m_len; | |
1530 | mopt->m_len += JUMBOOPTLEN; | |
1531 | } | |
1532 | optbuf[0] = IP6OPT_PADN; | |
1533 | optbuf[1] = 1; | |
1534 | ||
1535 | /* | |
1536 | * Adjust the header length according to the pad and | |
1537 | * the jumbo payload option. | |
1538 | */ | |
1539 | hbh = mtod(mopt, struct ip6_hbh *); | |
1540 | hbh->ip6h_len += (JUMBOOPTLEN >> 3); | |
1541 | } | |
1542 | ||
1543 | /* fill in the option. */ | |
1544 | optbuf[2] = IP6OPT_JUMBO; | |
1545 | optbuf[3] = 4; | |
1546 | v = (u_int32_t)htonl(plen + JUMBOOPTLEN); | |
1547 | bcopy(&v, &optbuf[4], sizeof(u_int32_t)); | |
1548 | ||
1549 | /* finally, adjust the packet header length */ | |
1550 | exthdrs->ip6e_ip6->m_pkthdr.len += JUMBOOPTLEN; | |
1551 | ||
1552 | return (0); | |
1553 | #undef JUMBOOPTLEN | |
1554 | } | |
1555 | ||
1556 | /* | |
1557 | * Insert fragment header and copy unfragmentable header portions. | |
1558 | */ | |
1559 | static int | |
1560 | ip6_insertfraghdr(m0, m, hlen, frghdrp) | |
1561 | struct mbuf *m0, *m; | |
1562 | int hlen; | |
1563 | struct ip6_frag **frghdrp; | |
1564 | { | |
1565 | struct mbuf *n, *mlast; | |
1566 | ||
1567 | if (hlen > sizeof(struct ip6_hdr)) { | |
1568 | n = m_copym(m0, sizeof(struct ip6_hdr), | |
1569 | hlen - sizeof(struct ip6_hdr), M_DONTWAIT); | |
1570 | if (n == 0) | |
1571 | return (ENOBUFS); | |
1572 | m->m_next = n; | |
1573 | } else | |
1574 | n = m; | |
1575 | ||
1576 | /* Search for the last mbuf of unfragmentable part. */ | |
1577 | for (mlast = n; mlast->m_next; mlast = mlast->m_next) | |
1578 | ; | |
1579 | ||
1580 | if ((mlast->m_flags & M_EXT) == 0 && | |
1581 | M_TRAILINGSPACE(mlast) >= sizeof(struct ip6_frag)) { | |
1582 | /* use the trailing space of the last mbuf for the fragment hdr */ | |
1583 | *frghdrp = (struct ip6_frag *)(mtod(mlast, caddr_t) + | |
1584 | mlast->m_len); | |
1585 | mlast->m_len += sizeof(struct ip6_frag); | |
1586 | m->m_pkthdr.len += sizeof(struct ip6_frag); | |
1587 | } else { | |
1588 | /* allocate a new mbuf for the fragment header */ | |
1589 | struct mbuf *mfrg; | |
1590 | ||
1591 | MGET(mfrg, M_DONTWAIT, MT_DATA); | |
1592 | if (mfrg == 0) | |
1593 | return (ENOBUFS); | |
1594 | mfrg->m_len = sizeof(struct ip6_frag); | |
1595 | *frghdrp = mtod(mfrg, struct ip6_frag *); | |
1596 | mlast->m_next = mfrg; | |
1597 | } | |
1598 | ||
1599 | return (0); | |
1600 | } | |
1601 | ||
1602 | extern int load_ipfw(void); | |
1603 | static int | |
1604 | ip6_getpmtu(struct route_in6 *ro_pmtu, struct route_in6 *ro, | |
1605 | struct ifnet *ifp, struct in6_addr *dst, u_int32_t *mtup, | |
1606 | int *alwaysfragp) | |
1607 | { | |
1608 | u_int32_t mtu = 0; | |
1609 | int alwaysfrag = 0; | |
1610 | int error = 0; | |
1611 | ||
1612 | if (ro_pmtu != ro) { | |
1613 | /* The first hop and the final destination may differ. */ | |
1614 | struct sockaddr_in6 *sa6_dst = | |
1615 | (struct sockaddr_in6 *)&ro_pmtu->ro_dst; | |
1616 | if (ro_pmtu->ro_rt && | |
1617 | ((ro_pmtu->ro_rt->rt_flags & RTF_UP) == 0 || | |
1618 | ro_pmtu->ro_rt->generation_id != route_generation || | |
1619 | !IN6_ARE_ADDR_EQUAL(&sa6_dst->sin6_addr, dst))) { | |
1620 | rtfree(ro_pmtu->ro_rt); | |
1621 | ro_pmtu->ro_rt = (struct rtentry *)NULL; | |
1622 | } | |
1623 | if (ro_pmtu->ro_rt == NULL) { | |
1624 | bzero(sa6_dst, sizeof(*sa6_dst)); | |
1625 | sa6_dst->sin6_family = AF_INET6; | |
1626 | sa6_dst->sin6_len = sizeof(struct sockaddr_in6); | |
1627 | sa6_dst->sin6_addr = *dst; | |
1628 | ||
1629 | rtalloc_scoped((struct route *)ro_pmtu, | |
1630 | ifp != NULL ? ifp->if_index : IFSCOPE_NONE); | |
1631 | } | |
1632 | } | |
1633 | ||
1634 | ||
1635 | if (ro_pmtu->ro_rt != NULL) { | |
1636 | u_int32_t ifmtu; | |
1637 | ||
1638 | lck_rw_lock_shared(nd_if_rwlock); | |
1639 | ifmtu = IN6_LINKMTU(ifp); | |
1640 | lck_rw_done(nd_if_rwlock); | |
1641 | ||
1642 | RT_LOCK_SPIN(ro_pmtu->ro_rt); | |
1643 | mtu = ro_pmtu->ro_rt->rt_rmx.rmx_mtu; | |
1644 | if (mtu > ifmtu || mtu == 0) { | |
1645 | /* | |
1646 | * The MTU on the route is larger than the MTU on | |
1647 | * the interface! This shouldn't happen, unless the | |
1648 | * MTU of the interface has been changed after the | |
1649 | * interface was brought up. Change the MTU in the | |
1650 | * route to match the interface MTU (as long as the | |
1651 | * field isn't locked). | |
1652 | * | |
1653 | * if MTU on the route is 0, we need to fix the MTU. | |
1654 | * this case happens with path MTU discovery timeouts. | |
1655 | */ | |
1656 | mtu = ifmtu; | |
1657 | if ((ro_pmtu->ro_rt->rt_rmx.rmx_locks & RTV_MTU) == 0) | |
1658 | ro_pmtu->ro_rt->rt_rmx.rmx_mtu = mtu; /* XXX */ | |
1659 | } | |
1660 | else if (mtu < IPV6_MMTU) { | |
1661 | /* | |
1662 | * RFC2460 section 5, last paragraph: | |
1663 | * if we record ICMPv6 too big message with | |
1664 | * mtu < IPV6_MMTU, transmit packets sized IPV6_MMTU | |
1665 | * or smaller, with framgent header attached. | |
1666 | * (fragment header is needed regardless from the | |
1667 | * packet size, for translators to identify packets) | |
1668 | */ | |
1669 | alwaysfrag = 1; | |
1670 | mtu = IPV6_MMTU; | |
1671 | } | |
1672 | RT_UNLOCK(ro_pmtu->ro_rt); | |
1673 | } else { | |
1674 | if (ifp) { | |
1675 | lck_rw_lock_shared(nd_if_rwlock); | |
1676 | mtu = IN6_LINKMTU(ifp); | |
1677 | lck_rw_done(nd_if_rwlock); | |
1678 | } else | |
1679 | error = EHOSTUNREACH; /* XXX */ | |
1680 | } | |
1681 | ||
1682 | *mtup = mtu; | |
1683 | if (alwaysfragp) | |
1684 | *alwaysfragp = alwaysfrag; | |
1685 | return (error); | |
1686 | } | |
1687 | ||
1688 | /* | |
1689 | * IP6 socket option processing. | |
1690 | */ | |
1691 | int | |
1692 | ip6_ctloutput(so, sopt) | |
1693 | struct socket *so; | |
1694 | struct sockopt *sopt; | |
1695 | { | |
1696 | int optdatalen, uproto; | |
1697 | void *optdata; | |
1698 | int privileged; | |
1699 | struct inpcb *in6p = sotoinpcb(so); | |
1700 | int error = 0, optval = 0; | |
1701 | int level, op = -1, optname = 0; | |
1702 | int optlen = 0; | |
1703 | struct proc *p; | |
1704 | ||
1705 | if (sopt == NULL) { | |
1706 | panic("ip6_ctloutput: arg soopt is NULL"); | |
1707 | /* NOTREACHED */ | |
1708 | } | |
1709 | level = sopt->sopt_level; | |
1710 | op = sopt->sopt_dir; | |
1711 | optname = sopt->sopt_name; | |
1712 | optlen = sopt->sopt_valsize; | |
1713 | p = sopt->sopt_p; | |
1714 | uproto = (int)so->so_proto->pr_protocol; | |
1715 | ||
1716 | privileged = (proc_suser(p) == 0); | |
1717 | ||
1718 | if (level == IPPROTO_IPV6) { | |
1719 | switch (op) { | |
1720 | ||
1721 | case SOPT_SET: | |
1722 | switch (optname) { | |
1723 | case IPV6_2292PKTOPTIONS: | |
1724 | { | |
1725 | struct mbuf *m; | |
1726 | ||
1727 | error = soopt_getm(sopt, &m); /* XXX */ | |
1728 | if (error != 0) | |
1729 | break; | |
1730 | error = soopt_mcopyin(sopt, m); /* XXX */ | |
1731 | if (error != 0) | |
1732 | break; | |
1733 | error = ip6_pcbopts(&in6p->in6p_outputopts, | |
1734 | m, so, sopt); | |
1735 | m_freem(m); /* XXX */ | |
1736 | break; | |
1737 | } | |
1738 | ||
1739 | /* | |
1740 | * Use of some Hop-by-Hop options or some | |
1741 | * Destination options, might require special | |
1742 | * privilege. That is, normal applications | |
1743 | * (without special privilege) might be forbidden | |
1744 | * from setting certain options in outgoing packets, | |
1745 | * and might never see certain options in received | |
1746 | * packets. [RFC 2292 Section 6] | |
1747 | * KAME specific note: | |
1748 | * KAME prevents non-privileged users from sending or | |
1749 | * receiving ANY hbh/dst options in order to avoid | |
1750 | * overhead of parsing options in the kernel. | |
1751 | */ | |
1752 | case IPV6_RECVHOPOPTS: | |
1753 | case IPV6_RECVDSTOPTS: | |
1754 | case IPV6_RECVRTHDRDSTOPTS: | |
1755 | if (!privileged) | |
1756 | break; | |
1757 | /* FALLTHROUGH */ | |
1758 | case IPV6_UNICAST_HOPS: | |
1759 | case IPV6_HOPLIMIT: | |
1760 | case IPV6_FAITH: | |
1761 | ||
1762 | case IPV6_RECVPKTINFO: | |
1763 | case IPV6_RECVHOPLIMIT: | |
1764 | case IPV6_RECVRTHDR: | |
1765 | case IPV6_RECVPATHMTU: | |
1766 | case IPV6_RECVTCLASS: | |
1767 | case IPV6_V6ONLY: | |
1768 | case IPV6_AUTOFLOWLABEL: | |
1769 | if (optlen != sizeof(int)) { | |
1770 | error = EINVAL; | |
1771 | break; | |
1772 | } | |
1773 | error = sooptcopyin(sopt, &optval, | |
1774 | sizeof optval, sizeof optval); | |
1775 | if (error) | |
1776 | break; | |
1777 | switch (optname) { | |
1778 | ||
1779 | case IPV6_UNICAST_HOPS: | |
1780 | if (optval < -1 || optval >= 256) | |
1781 | error = EINVAL; | |
1782 | else { | |
1783 | /* -1 = kernel default */ | |
1784 | in6p->in6p_hops = optval; | |
1785 | if ((in6p->inp_vflag & | |
1786 | INP_IPV4) != 0) | |
1787 | in6p->inp_ip_ttl = optval; | |
1788 | } | |
1789 | break; | |
1790 | #define OPTSET(bit) \ | |
1791 | do { \ | |
1792 | if (optval) \ | |
1793 | in6p->inp_flags |= (bit); \ | |
1794 | else \ | |
1795 | in6p->inp_flags &= ~(bit); \ | |
1796 | } while (/*CONSTCOND*/ 0) | |
1797 | #define OPTSET2292(bit) \ | |
1798 | do { \ | |
1799 | in6p->inp_flags |= IN6P_RFC2292; \ | |
1800 | if (optval) \ | |
1801 | in6p->inp_flags |= (bit); \ | |
1802 | else \ | |
1803 | in6p->inp_flags &= ~(bit); \ | |
1804 | } while (/*CONSTCOND*/ 0) | |
1805 | #define OPTBIT(bit) (in6p->inp_flags & (bit) ? 1 : 0) | |
1806 | ||
1807 | case IPV6_RECVPKTINFO: | |
1808 | /* cannot mix with RFC2292 */ | |
1809 | if (OPTBIT(IN6P_RFC2292)) { | |
1810 | error = EINVAL; | |
1811 | break; | |
1812 | } | |
1813 | OPTSET(IN6P_PKTINFO); | |
1814 | break; | |
1815 | ||
1816 | case IPV6_HOPLIMIT: | |
1817 | { | |
1818 | struct ip6_pktopts **optp; | |
1819 | ||
1820 | /* cannot mix with RFC2292 */ | |
1821 | if (OPTBIT(IN6P_RFC2292)) { | |
1822 | error = EINVAL; | |
1823 | break; | |
1824 | } | |
1825 | optp = &in6p->in6p_outputopts; | |
1826 | error = ip6_pcbopt(IPV6_HOPLIMIT, | |
1827 | (u_char *)&optval, sizeof(optval), | |
1828 | optp, uproto); | |
1829 | break; | |
1830 | } | |
1831 | ||
1832 | case IPV6_RECVHOPLIMIT: | |
1833 | /* cannot mix with RFC2292 */ | |
1834 | if (OPTBIT(IN6P_RFC2292)) { | |
1835 | error = EINVAL; | |
1836 | break; | |
1837 | } | |
1838 | OPTSET(IN6P_HOPLIMIT); | |
1839 | break; | |
1840 | ||
1841 | case IPV6_RECVHOPOPTS: | |
1842 | /* cannot mix with RFC2292 */ | |
1843 | if (OPTBIT(IN6P_RFC2292)) { | |
1844 | error = EINVAL; | |
1845 | break; | |
1846 | } | |
1847 | OPTSET(IN6P_HOPOPTS); | |
1848 | break; | |
1849 | ||
1850 | case IPV6_RECVDSTOPTS: | |
1851 | /* cannot mix with RFC2292 */ | |
1852 | if (OPTBIT(IN6P_RFC2292)) { | |
1853 | error = EINVAL; | |
1854 | break; | |
1855 | } | |
1856 | OPTSET(IN6P_DSTOPTS); | |
1857 | break; | |
1858 | ||
1859 | case IPV6_RECVRTHDRDSTOPTS: | |
1860 | /* cannot mix with RFC2292 */ | |
1861 | if (OPTBIT(IN6P_RFC2292)) { | |
1862 | error = EINVAL; | |
1863 | break; | |
1864 | } | |
1865 | OPTSET(IN6P_RTHDRDSTOPTS); | |
1866 | break; | |
1867 | ||
1868 | case IPV6_RECVRTHDR: | |
1869 | /* cannot mix with RFC2292 */ | |
1870 | if (OPTBIT(IN6P_RFC2292)) { | |
1871 | error = EINVAL; | |
1872 | break; | |
1873 | } | |
1874 | OPTSET(IN6P_RTHDR); | |
1875 | break; | |
1876 | ||
1877 | case IPV6_FAITH: | |
1878 | OPTSET(INP_FAITH); | |
1879 | break; | |
1880 | ||
1881 | case IPV6_RECVPATHMTU: | |
1882 | /* | |
1883 | * We ignore this option for TCP | |
1884 | * sockets. | |
1885 | * (RFC3542 leaves this case | |
1886 | * unspecified.) | |
1887 | */ | |
1888 | if (uproto != IPPROTO_TCP) | |
1889 | OPTSET(IN6P_MTU); | |
1890 | break; | |
1891 | ||
1892 | case IPV6_V6ONLY: | |
1893 | /* | |
1894 | * make setsockopt(IPV6_V6ONLY) | |
1895 | * available only prior to bind(2). | |
1896 | * see ipng mailing list, Jun 22 2001. | |
1897 | */ | |
1898 | if (in6p->inp_lport || | |
1899 | !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) { | |
1900 | error = EINVAL; | |
1901 | break; | |
1902 | } | |
1903 | OPTSET(IN6P_IPV6_V6ONLY); | |
1904 | if (optval) | |
1905 | in6p->inp_vflag &= ~INP_IPV4; | |
1906 | else | |
1907 | in6p->inp_vflag |= INP_IPV4; | |
1908 | break; | |
1909 | case IPV6_RECVTCLASS: | |
1910 | /* we can mix with RFC2292 */ | |
1911 | OPTSET(IN6P_TCLASS); | |
1912 | break; | |
1913 | case IPV6_AUTOFLOWLABEL: | |
1914 | OPTSET(IN6P_AUTOFLOWLABEL); | |
1915 | break; | |
1916 | ||
1917 | } | |
1918 | break; | |
1919 | ||
1920 | case IPV6_TCLASS: | |
1921 | case IPV6_DONTFRAG: | |
1922 | case IPV6_USE_MIN_MTU: | |
1923 | case IPV6_PREFER_TEMPADDR: | |
1924 | if (optlen != sizeof(optval)) { | |
1925 | error = EINVAL; | |
1926 | break; | |
1927 | } | |
1928 | error = sooptcopyin(sopt, &optval, | |
1929 | sizeof optval, sizeof optval); | |
1930 | if (error) | |
1931 | break; | |
1932 | { | |
1933 | struct ip6_pktopts **optp; | |
1934 | optp = &in6p->in6p_outputopts; | |
1935 | error = ip6_pcbopt(optname, | |
1936 | (u_char *)&optval, sizeof(optval), | |
1937 | optp, uproto); | |
1938 | break; | |
1939 | } | |
1940 | ||
1941 | case IPV6_2292PKTINFO: | |
1942 | case IPV6_2292HOPLIMIT: | |
1943 | case IPV6_2292HOPOPTS: | |
1944 | case IPV6_2292DSTOPTS: | |
1945 | case IPV6_2292RTHDR: | |
1946 | /* RFC 2292 */ | |
1947 | if (optlen != sizeof(int)) { | |
1948 | error = EINVAL; | |
1949 | break; | |
1950 | } | |
1951 | error = sooptcopyin(sopt, &optval, | |
1952 | sizeof optval, sizeof optval); | |
1953 | if (error) | |
1954 | break; | |
1955 | switch (optname) { | |
1956 | case IPV6_2292PKTINFO: | |
1957 | OPTSET2292(IN6P_PKTINFO); | |
1958 | break; | |
1959 | case IPV6_2292HOPLIMIT: | |
1960 | OPTSET2292(IN6P_HOPLIMIT); | |
1961 | break; | |
1962 | case IPV6_2292HOPOPTS: | |
1963 | /* | |
1964 | * Check super-user privilege. | |
1965 | * See comments for IPV6_RECVHOPOPTS. | |
1966 | */ | |
1967 | if (!privileged) | |
1968 | return(EPERM); | |
1969 | OPTSET2292(IN6P_HOPOPTS); | |
1970 | break; | |
1971 | case IPV6_2292DSTOPTS: | |
1972 | if (!privileged) | |
1973 | return(EPERM); | |
1974 | OPTSET2292(IN6P_DSTOPTS|IN6P_RTHDRDSTOPTS); /* XXX */ | |
1975 | break; | |
1976 | case IPV6_2292RTHDR: | |
1977 | OPTSET2292(IN6P_RTHDR); | |
1978 | break; | |
1979 | } | |
1980 | break; | |
1981 | case IPV6_3542PKTINFO: | |
1982 | case IPV6_3542HOPOPTS: | |
1983 | case IPV6_3542RTHDR: | |
1984 | case IPV6_3542DSTOPTS: | |
1985 | case IPV6_RTHDRDSTOPTS: | |
1986 | case IPV6_3542NEXTHOP: | |
1987 | { | |
1988 | /* new advanced API (RFC3542) */ | |
1989 | struct mbuf *m; | |
1990 | ||
1991 | /* cannot mix with RFC2292 */ | |
1992 | if (OPTBIT(IN6P_RFC2292)) { | |
1993 | error = EINVAL; | |
1994 | break; | |
1995 | } | |
1996 | error = soopt_getm(sopt, &m); | |
1997 | if (error != 0) | |
1998 | break; | |
1999 | error = soopt_mcopyin(sopt, m); | |
2000 | if (error) { | |
2001 | m_freem(m); | |
2002 | break; | |
2003 | } | |
2004 | error = ip6_pcbopt(optname, mtod(m, u_char *), | |
2005 | m->m_len, &in6p->in6p_outputopts, uproto); | |
2006 | m_freem(m); | |
2007 | break; | |
2008 | } | |
2009 | #undef OPTSET | |
2010 | ||
2011 | case IPV6_MULTICAST_IF: | |
2012 | case IPV6_MULTICAST_HOPS: | |
2013 | case IPV6_MULTICAST_LOOP: | |
2014 | case IPV6_JOIN_GROUP: | |
2015 | case IPV6_LEAVE_GROUP: | |
2016 | case IPV6_MSFILTER: | |
2017 | case MCAST_BLOCK_SOURCE: | |
2018 | case MCAST_UNBLOCK_SOURCE: | |
2019 | case MCAST_JOIN_GROUP: | |
2020 | case MCAST_LEAVE_GROUP: | |
2021 | case MCAST_JOIN_SOURCE_GROUP: | |
2022 | case MCAST_LEAVE_SOURCE_GROUP: | |
2023 | error = ip6_setmoptions(in6p, sopt); | |
2024 | break; | |
2025 | ||
2026 | case IPV6_PORTRANGE: | |
2027 | error = sooptcopyin(sopt, &optval, | |
2028 | sizeof optval, sizeof optval); | |
2029 | if (error) | |
2030 | break; | |
2031 | ||
2032 | switch (optval) { | |
2033 | case IPV6_PORTRANGE_DEFAULT: | |
2034 | in6p->inp_flags &= ~(INP_LOWPORT); | |
2035 | in6p->inp_flags &= ~(INP_HIGHPORT); | |
2036 | break; | |
2037 | ||
2038 | case IPV6_PORTRANGE_HIGH: | |
2039 | in6p->inp_flags &= ~(INP_LOWPORT); | |
2040 | in6p->inp_flags |= INP_HIGHPORT; | |
2041 | break; | |
2042 | ||
2043 | case IPV6_PORTRANGE_LOW: | |
2044 | in6p->inp_flags &= ~(INP_HIGHPORT); | |
2045 | in6p->inp_flags |= INP_LOWPORT; | |
2046 | break; | |
2047 | ||
2048 | default: | |
2049 | error = EINVAL; | |
2050 | break; | |
2051 | } | |
2052 | break; | |
2053 | ||
2054 | #if IPSEC | |
2055 | case IPV6_IPSEC_POLICY: | |
2056 | { | |
2057 | caddr_t req = NULL; | |
2058 | size_t len = 0; | |
2059 | struct mbuf *m; | |
2060 | ||
2061 | if ((error = soopt_getm(sopt, &m)) != 0) /* XXX */ | |
2062 | break; | |
2063 | if ((error = soopt_mcopyin(sopt, m)) != 0) /* XXX */ | |
2064 | break; | |
2065 | if (m) { | |
2066 | req = mtod(m, caddr_t); | |
2067 | len = m->m_len; | |
2068 | } | |
2069 | error = ipsec6_set_policy(in6p, optname, req, | |
2070 | len, privileged); | |
2071 | m_freem(m); | |
2072 | } | |
2073 | break; | |
2074 | #endif /* KAME IPSEC */ | |
2075 | ||
2076 | #if IPFIREWALL | |
2077 | case IPV6_FW_ADD: | |
2078 | case IPV6_FW_DEL: | |
2079 | case IPV6_FW_FLUSH: | |
2080 | case IPV6_FW_ZERO: | |
2081 | { | |
2082 | if (ip6_fw_ctl_ptr == NULL) | |
2083 | load_ip6fw(); | |
2084 | if (ip6_fw_ctl_ptr != NULL) | |
2085 | error = (*ip6_fw_ctl_ptr)(sopt); | |
2086 | else | |
2087 | return ENOPROTOOPT; | |
2088 | } | |
2089 | break; | |
2090 | #endif /* IPFIREWALL */ | |
2091 | ||
2092 | /* | |
2093 | * IPv6 variant of IP_BOUND_IF; for details see | |
2094 | * comments on IP_BOUND_IF in ip_ctloutput(). | |
2095 | */ | |
2096 | case IPV6_BOUND_IF: | |
2097 | /* This option is settable only on IPv6 */ | |
2098 | if (!(in6p->inp_vflag & INP_IPV6)) { | |
2099 | error = EINVAL; | |
2100 | break; | |
2101 | } | |
2102 | ||
2103 | error = sooptcopyin(sopt, &optval, | |
2104 | sizeof (optval), sizeof (optval)); | |
2105 | ||
2106 | if (error) | |
2107 | break; | |
2108 | ||
2109 | inp_bindif(in6p, optval); | |
2110 | break; | |
2111 | ||
2112 | case IPV6_NO_IFT_CELLULAR: | |
2113 | /* This option is settable only for IPv6 */ | |
2114 | if (!(in6p->inp_vflag & INP_IPV6)) { | |
2115 | error = EINVAL; | |
2116 | break; | |
2117 | } | |
2118 | ||
2119 | error = sooptcopyin(sopt, &optval, | |
2120 | sizeof (optval), sizeof (optval)); | |
2121 | ||
2122 | if (error) | |
2123 | break; | |
2124 | ||
2125 | error = inp_nocellular(in6p, optval); | |
2126 | break; | |
2127 | ||
2128 | case IPV6_OUT_IF: | |
2129 | /* This option is not settable */ | |
2130 | error = EINVAL; | |
2131 | break; | |
2132 | ||
2133 | default: | |
2134 | error = ENOPROTOOPT; | |
2135 | break; | |
2136 | } | |
2137 | break; | |
2138 | ||
2139 | case SOPT_GET: | |
2140 | switch (optname) { | |
2141 | ||
2142 | case IPV6_2292PKTOPTIONS: | |
2143 | /* | |
2144 | * RFC3542 (effectively) deprecated the | |
2145 | * semantics of the 2292-style pktoptions. | |
2146 | * Since it was not reliable in nature (i.e., | |
2147 | * applications had to expect the lack of some | |
2148 | * information after all), it would make sense | |
2149 | * to simplify this part by always returning | |
2150 | * empty data. | |
2151 | */ | |
2152 | sopt->sopt_valsize = 0; | |
2153 | break; | |
2154 | ||
2155 | case IPV6_RECVHOPOPTS: | |
2156 | case IPV6_RECVDSTOPTS: | |
2157 | case IPV6_RECVRTHDRDSTOPTS: | |
2158 | case IPV6_UNICAST_HOPS: | |
2159 | case IPV6_RECVPKTINFO: | |
2160 | case IPV6_RECVHOPLIMIT: | |
2161 | case IPV6_RECVRTHDR: | |
2162 | case IPV6_RECVPATHMTU: | |
2163 | ||
2164 | case IPV6_FAITH: | |
2165 | case IPV6_V6ONLY: | |
2166 | case IPV6_PORTRANGE: | |
2167 | case IPV6_RECVTCLASS: | |
2168 | case IPV6_AUTOFLOWLABEL: | |
2169 | switch (optname) { | |
2170 | ||
2171 | case IPV6_RECVHOPOPTS: | |
2172 | optval = OPTBIT(IN6P_HOPOPTS); | |
2173 | break; | |
2174 | ||
2175 | case IPV6_RECVDSTOPTS: | |
2176 | optval = OPTBIT(IN6P_DSTOPTS); | |
2177 | break; | |
2178 | ||
2179 | case IPV6_RECVRTHDRDSTOPTS: | |
2180 | optval = OPTBIT(IN6P_RTHDRDSTOPTS); | |
2181 | break; | |
2182 | ||
2183 | case IPV6_UNICAST_HOPS: | |
2184 | optval = in6p->in6p_hops; | |
2185 | break; | |
2186 | ||
2187 | case IPV6_RECVPKTINFO: | |
2188 | optval = OPTBIT(IN6P_PKTINFO); | |
2189 | break; | |
2190 | ||
2191 | case IPV6_RECVHOPLIMIT: | |
2192 | optval = OPTBIT(IN6P_HOPLIMIT); | |
2193 | break; | |
2194 | ||
2195 | case IPV6_RECVRTHDR: | |
2196 | optval = OPTBIT(IN6P_RTHDR); | |
2197 | break; | |
2198 | ||
2199 | case IPV6_RECVPATHMTU: | |
2200 | optval = OPTBIT(IN6P_MTU); | |
2201 | break; | |
2202 | ||
2203 | case IPV6_FAITH: | |
2204 | optval = OPTBIT(INP_FAITH); | |
2205 | break; | |
2206 | ||
2207 | case IPV6_V6ONLY: | |
2208 | optval = OPTBIT(IN6P_IPV6_V6ONLY); | |
2209 | break; | |
2210 | ||
2211 | case IPV6_PORTRANGE: | |
2212 | { | |
2213 | int flags; | |
2214 | flags = in6p->inp_flags; | |
2215 | if (flags & INP_HIGHPORT) | |
2216 | optval = IPV6_PORTRANGE_HIGH; | |
2217 | else if (flags & INP_LOWPORT) | |
2218 | optval = IPV6_PORTRANGE_LOW; | |
2219 | else | |
2220 | optval = 0; | |
2221 | break; | |
2222 | } | |
2223 | case IPV6_RECVTCLASS: | |
2224 | optval = OPTBIT(IN6P_TCLASS); | |
2225 | break; | |
2226 | ||
2227 | case IPV6_AUTOFLOWLABEL: | |
2228 | optval = OPTBIT(IN6P_AUTOFLOWLABEL); | |
2229 | break; | |
2230 | } | |
2231 | if (error) | |
2232 | break; | |
2233 | error = sooptcopyout(sopt, &optval, | |
2234 | sizeof optval); | |
2235 | break; | |
2236 | ||
2237 | case IPV6_PATHMTU: | |
2238 | { | |
2239 | u_int32_t pmtu = 0; | |
2240 | struct ip6_mtuinfo mtuinfo; | |
2241 | struct route_in6 sro; | |
2242 | ||
2243 | bzero(&sro, sizeof(sro)); | |
2244 | ||
2245 | if (!(so->so_state & SS_ISCONNECTED)) | |
2246 | return (ENOTCONN); | |
2247 | /* | |
2248 | * XXX: we dot not consider the case of source | |
2249 | * routing, or optional information to specify | |
2250 | * the outgoing interface. | |
2251 | */ | |
2252 | error = ip6_getpmtu(&sro, NULL, NULL, | |
2253 | &in6p->in6p_faddr, &pmtu, NULL); | |
2254 | if (sro.ro_rt) | |
2255 | rtfree(sro.ro_rt); | |
2256 | if (error) | |
2257 | break; | |
2258 | if (pmtu > IPV6_MAXPACKET) | |
2259 | pmtu = IPV6_MAXPACKET; | |
2260 | ||
2261 | bzero(&mtuinfo, sizeof(mtuinfo)); | |
2262 | mtuinfo.ip6m_mtu = (u_int32_t)pmtu; | |
2263 | optdata = (void *)&mtuinfo; | |
2264 | optdatalen = sizeof(mtuinfo); | |
2265 | error = sooptcopyout(sopt, optdata, | |
2266 | optdatalen); | |
2267 | break; | |
2268 | } | |
2269 | ||
2270 | case IPV6_2292PKTINFO: | |
2271 | case IPV6_2292HOPLIMIT: | |
2272 | case IPV6_2292HOPOPTS: | |
2273 | case IPV6_2292RTHDR: | |
2274 | case IPV6_2292DSTOPTS: | |
2275 | switch (optname) { | |
2276 | case IPV6_2292PKTINFO: | |
2277 | optval = OPTBIT(IN6P_PKTINFO); | |
2278 | break; | |
2279 | case IPV6_2292HOPLIMIT: | |
2280 | optval = OPTBIT(IN6P_HOPLIMIT); | |
2281 | break; | |
2282 | case IPV6_2292HOPOPTS: | |
2283 | optval = OPTBIT(IN6P_HOPOPTS); | |
2284 | break; | |
2285 | case IPV6_2292RTHDR: | |
2286 | optval = OPTBIT(IN6P_RTHDR); | |
2287 | break; | |
2288 | case IPV6_2292DSTOPTS: | |
2289 | optval = OPTBIT(IN6P_DSTOPTS|IN6P_RTHDRDSTOPTS); | |
2290 | break; | |
2291 | } | |
2292 | error = sooptcopyout(sopt, &optval, | |
2293 | sizeof optval); | |
2294 | break; | |
2295 | case IPV6_PKTINFO: | |
2296 | case IPV6_HOPOPTS: | |
2297 | case IPV6_RTHDR: | |
2298 | case IPV6_DSTOPTS: | |
2299 | case IPV6_RTHDRDSTOPTS: | |
2300 | case IPV6_NEXTHOP: | |
2301 | case IPV6_TCLASS: | |
2302 | case IPV6_DONTFRAG: | |
2303 | case IPV6_USE_MIN_MTU: | |
2304 | case IPV6_PREFER_TEMPADDR: | |
2305 | error = ip6_getpcbopt(in6p->in6p_outputopts, | |
2306 | optname, sopt); | |
2307 | break; | |
2308 | ||
2309 | case IPV6_MULTICAST_IF: | |
2310 | case IPV6_MULTICAST_HOPS: | |
2311 | case IPV6_MULTICAST_LOOP: | |
2312 | case IPV6_MSFILTER: | |
2313 | error = ip6_getmoptions(in6p, sopt); | |
2314 | break; | |
2315 | ||
2316 | #if IPSEC | |
2317 | case IPV6_IPSEC_POLICY: | |
2318 | { | |
2319 | caddr_t req = NULL; | |
2320 | size_t len = 0; | |
2321 | struct mbuf *m = NULL; | |
2322 | struct mbuf **mp = &m; | |
2323 | ||
2324 | error = soopt_getm(sopt, &m); /* XXX */ | |
2325 | if (error != 0) | |
2326 | break; | |
2327 | error = soopt_mcopyin(sopt, m); /* XXX */ | |
2328 | if (error != 0) | |
2329 | break; | |
2330 | if (m) { | |
2331 | req = mtod(m, caddr_t); | |
2332 | len = m->m_len; | |
2333 | } | |
2334 | error = ipsec6_get_policy(in6p, req, len, mp); | |
2335 | if (error == 0) | |
2336 | error = soopt_mcopyout(sopt, m); /*XXX*/ | |
2337 | if (error == 0 && m) | |
2338 | m_freem(m); | |
2339 | break; | |
2340 | } | |
2341 | #endif /* KAME IPSEC */ | |
2342 | ||
2343 | #if IPFIREWALL | |
2344 | case IPV6_FW_GET: | |
2345 | { | |
2346 | if (ip6_fw_ctl_ptr == NULL) | |
2347 | load_ip6fw(); | |
2348 | if (ip6_fw_ctl_ptr != NULL) | |
2349 | error = (*ip6_fw_ctl_ptr)(sopt); | |
2350 | else | |
2351 | return ENOPROTOOPT; | |
2352 | } | |
2353 | break; | |
2354 | #endif /* IPFIREWALL */ | |
2355 | ||
2356 | case IPV6_BOUND_IF: | |
2357 | if (in6p->inp_flags & INP_BOUND_IF) | |
2358 | optval = in6p->inp_boundif; | |
2359 | error = sooptcopyout(sopt, &optval, | |
2360 | sizeof (optval)); | |
2361 | break; | |
2362 | ||
2363 | case IPV6_NO_IFT_CELLULAR: | |
2364 | optval = (in6p->inp_flags & INP_NO_IFT_CELLULAR) | |
2365 | ? 1 : 0; | |
2366 | error = sooptcopyout(sopt, &optval, | |
2367 | sizeof (optval)); | |
2368 | break; | |
2369 | ||
2370 | case IPV6_OUT_IF: | |
2371 | optval = in6p->in6p_last_outif; | |
2372 | error = sooptcopyout(sopt, &optval, | |
2373 | sizeof (optval)); | |
2374 | break; | |
2375 | ||
2376 | default: | |
2377 | error = ENOPROTOOPT; | |
2378 | break; | |
2379 | } | |
2380 | break; | |
2381 | } | |
2382 | } else { | |
2383 | error = EINVAL; | |
2384 | } | |
2385 | return(error); | |
2386 | } | |
2387 | ||
2388 | int | |
2389 | ip6_raw_ctloutput(struct socket *so, struct sockopt *sopt) | |
2390 | { | |
2391 | int error = 0, optval, optlen; | |
2392 | const int icmp6off = offsetof(struct icmp6_hdr, icmp6_cksum); | |
2393 | struct inpcb *in6p = sotoinpcb(so); | |
2394 | int level, op, optname; | |
2395 | ||
2396 | level = sopt->sopt_level; | |
2397 | op = sopt->sopt_dir; | |
2398 | optname = sopt->sopt_name; | |
2399 | optlen = sopt->sopt_valsize; | |
2400 | ||
2401 | if (level != IPPROTO_IPV6) { | |
2402 | return (EINVAL); | |
2403 | } | |
2404 | ||
2405 | switch (optname) { | |
2406 | case IPV6_CHECKSUM: | |
2407 | /* | |
2408 | * For ICMPv6 sockets, no modification allowed for checksum | |
2409 | * offset, permit "no change" values to help existing apps. | |
2410 | * | |
2411 | * RFC3542 says: "An attempt to set IPV6_CHECKSUM | |
2412 | * for an ICMPv6 socket will fail." | |
2413 | * The current behavior does not meet RFC3542. | |
2414 | */ | |
2415 | switch (op) { | |
2416 | case SOPT_SET: | |
2417 | if (optlen != sizeof(int)) { | |
2418 | error = EINVAL; | |
2419 | break; | |
2420 | } | |
2421 | error = sooptcopyin(sopt, &optval, sizeof(optval), | |
2422 | sizeof(optval)); | |
2423 | if (error) | |
2424 | break; | |
2425 | if ((optval % 2) != 0) { | |
2426 | /* the API assumes even offset values */ | |
2427 | error = EINVAL; | |
2428 | } else if (so->so_proto->pr_protocol == | |
2429 | IPPROTO_ICMPV6) { | |
2430 | if (optval != icmp6off) | |
2431 | error = EINVAL; | |
2432 | } else | |
2433 | in6p->in6p_cksum = optval; | |
2434 | break; | |
2435 | ||
2436 | case SOPT_GET: | |
2437 | if (so->so_proto->pr_protocol == IPPROTO_ICMPV6) | |
2438 | optval = icmp6off; | |
2439 | else | |
2440 | optval = in6p->in6p_cksum; | |
2441 | ||
2442 | error = sooptcopyout(sopt, &optval, sizeof(optval)); | |
2443 | break; | |
2444 | ||
2445 | default: | |
2446 | error = EINVAL; | |
2447 | break; | |
2448 | } | |
2449 | break; | |
2450 | ||
2451 | default: | |
2452 | error = ENOPROTOOPT; | |
2453 | break; | |
2454 | } | |
2455 | ||
2456 | return (error); | |
2457 | } | |
2458 | ||
2459 | /* | |
2460 | * Set up IP6 options in pcb for insertion in output packets or | |
2461 | * specifying behavior of outgoing packets. | |
2462 | */ | |
2463 | static int | |
2464 | ip6_pcbopts( | |
2465 | struct ip6_pktopts **pktopt, | |
2466 | struct mbuf *m, | |
2467 | __unused struct socket *so, | |
2468 | __unused struct sockopt *sopt) | |
2469 | { | |
2470 | struct ip6_pktopts *opt = *pktopt; | |
2471 | int error = 0; | |
2472 | ||
2473 | /* turn off any old options. */ | |
2474 | if (opt) { | |
2475 | #if DIAGNOSTIC | |
2476 | if (opt->ip6po_pktinfo || opt->ip6po_nexthop || | |
2477 | opt->ip6po_hbh || opt->ip6po_dest1 || opt->ip6po_dest2 || | |
2478 | opt->ip6po_rhinfo.ip6po_rhi_rthdr) | |
2479 | printf("ip6_pcbopts: all specified options are cleared.\n"); | |
2480 | #endif | |
2481 | ip6_clearpktopts(opt, -1); | |
2482 | } else { | |
2483 | opt = _MALLOC(sizeof(*opt), M_IP6OPT, M_WAITOK); | |
2484 | if (opt == NULL) | |
2485 | return ENOBUFS; | |
2486 | } | |
2487 | *pktopt = NULL; | |
2488 | ||
2489 | if (!m || m->m_len == 0) { | |
2490 | /* | |
2491 | * Only turning off any previous options, regardless of | |
2492 | * whether the opt is just created or given. | |
2493 | */ | |
2494 | if (opt) | |
2495 | FREE(opt, M_IP6OPT); | |
2496 | return(0); | |
2497 | } | |
2498 | ||
2499 | /* set options specified by user. */ | |
2500 | if ((error = ip6_setpktopts(m, opt, NULL, so->so_proto->pr_protocol)) != 0) { | |
2501 | ip6_clearpktopts(opt, -1); /* XXX: discard all options */ | |
2502 | FREE(opt, M_IP6OPT); | |
2503 | return(error); | |
2504 | } | |
2505 | *pktopt = opt; | |
2506 | return(0); | |
2507 | } | |
2508 | ||
2509 | /* | |
2510 | * initialize ip6_pktopts. beware that there are non-zero default values in | |
2511 | * the struct. | |
2512 | */ | |
2513 | void | |
2514 | ip6_initpktopts(struct ip6_pktopts *opt) | |
2515 | { | |
2516 | ||
2517 | bzero(opt, sizeof(*opt)); | |
2518 | opt->ip6po_hlim = -1; /* -1 means default hop limit */ | |
2519 | opt->ip6po_tclass = -1; /* -1 means default traffic class */ | |
2520 | opt->ip6po_minmtu = IP6PO_MINMTU_MCASTONLY; | |
2521 | opt->ip6po_prefer_tempaddr = IP6PO_TEMPADDR_SYSTEM; | |
2522 | } | |
2523 | ||
2524 | static int | |
2525 | ip6_pcbopt(int optname, u_char *buf, int len, struct ip6_pktopts **pktopt, int uproto) | |
2526 | { | |
2527 | struct ip6_pktopts *opt; | |
2528 | ||
2529 | opt = *pktopt; | |
2530 | if (opt == NULL) { | |
2531 | opt = _MALLOC(sizeof(*opt), M_IP6OPT, M_WAITOK); | |
2532 | if (opt == NULL) | |
2533 | return(ENOBUFS); | |
2534 | ip6_initpktopts(opt); | |
2535 | *pktopt = opt; | |
2536 | } | |
2537 | ||
2538 | return (ip6_setpktopt(optname, buf, len, opt, 1, 0, uproto)); | |
2539 | } | |
2540 | ||
2541 | static int | |
2542 | ip6_getpcbopt(struct ip6_pktopts *pktopt, int optname, struct sockopt *sopt) | |
2543 | { | |
2544 | void *optdata = NULL; | |
2545 | int optdatalen = 0; | |
2546 | struct ip6_ext *ip6e; | |
2547 | int error = 0; | |
2548 | struct in6_pktinfo null_pktinfo; | |
2549 | int deftclass = 0, on; | |
2550 | int defminmtu = IP6PO_MINMTU_MCASTONLY; | |
2551 | int defpreftemp = IP6PO_TEMPADDR_SYSTEM; | |
2552 | ||
2553 | switch (optname) { | |
2554 | case IPV6_PKTINFO: | |
2555 | if (pktopt && pktopt->ip6po_pktinfo) | |
2556 | optdata = (void *)pktopt->ip6po_pktinfo; | |
2557 | else { | |
2558 | /* XXX: we don't have to do this every time... */ | |
2559 | bzero(&null_pktinfo, sizeof(null_pktinfo)); | |
2560 | optdata = (void *)&null_pktinfo; | |
2561 | } | |
2562 | optdatalen = sizeof(struct in6_pktinfo); | |
2563 | break; | |
2564 | case IPV6_TCLASS: | |
2565 | if (pktopt && pktopt->ip6po_tclass >= 0) | |
2566 | optdata = (void *)&pktopt->ip6po_tclass; | |
2567 | else | |
2568 | optdata = (void *)&deftclass; | |
2569 | optdatalen = sizeof(int); | |
2570 | break; | |
2571 | case IPV6_HOPOPTS: | |
2572 | if (pktopt && pktopt->ip6po_hbh) { | |
2573 | optdata = (void *)pktopt->ip6po_hbh; | |
2574 | ip6e = (struct ip6_ext *)pktopt->ip6po_hbh; | |
2575 | optdatalen = (ip6e->ip6e_len + 1) << 3; | |
2576 | } | |
2577 | break; | |
2578 | case IPV6_RTHDR: | |
2579 | if (pktopt && pktopt->ip6po_rthdr) { | |
2580 | optdata = (void *)pktopt->ip6po_rthdr; | |
2581 | ip6e = (struct ip6_ext *)pktopt->ip6po_rthdr; | |
2582 | optdatalen = (ip6e->ip6e_len + 1) << 3; | |
2583 | } | |
2584 | break; | |
2585 | case IPV6_RTHDRDSTOPTS: | |
2586 | if (pktopt && pktopt->ip6po_dest1) { | |
2587 | optdata = (void *)pktopt->ip6po_dest1; | |
2588 | ip6e = (struct ip6_ext *)pktopt->ip6po_dest1; | |
2589 | optdatalen = (ip6e->ip6e_len + 1) << 3; | |
2590 | } | |
2591 | break; | |
2592 | case IPV6_DSTOPTS: | |
2593 | if (pktopt && pktopt->ip6po_dest2) { | |
2594 | optdata = (void *)pktopt->ip6po_dest2; | |
2595 | ip6e = (struct ip6_ext *)pktopt->ip6po_dest2; | |
2596 | optdatalen = (ip6e->ip6e_len + 1) << 3; | |
2597 | } | |
2598 | break; | |
2599 | case IPV6_NEXTHOP: | |
2600 | if (pktopt && pktopt->ip6po_nexthop) { | |
2601 | optdata = (void *)pktopt->ip6po_nexthop; | |
2602 | optdatalen = pktopt->ip6po_nexthop->sa_len; | |
2603 | } | |
2604 | break; | |
2605 | case IPV6_USE_MIN_MTU: | |
2606 | if (pktopt) | |
2607 | optdata = (void *)&pktopt->ip6po_minmtu; | |
2608 | else | |
2609 | optdata = (void *)&defminmtu; | |
2610 | optdatalen = sizeof(int); | |
2611 | break; | |
2612 | case IPV6_DONTFRAG: | |
2613 | if (pktopt && ((pktopt->ip6po_flags) & IP6PO_DONTFRAG)) | |
2614 | on = 1; | |
2615 | else | |
2616 | on = 0; | |
2617 | optdata = (void *)&on; | |
2618 | optdatalen = sizeof(on); | |
2619 | break; | |
2620 | case IPV6_PREFER_TEMPADDR: | |
2621 | if (pktopt) | |
2622 | optdata = (void *)&pktopt->ip6po_prefer_tempaddr; | |
2623 | else | |
2624 | optdata = (void *)&defpreftemp; | |
2625 | optdatalen = sizeof(int); | |
2626 | break; | |
2627 | default: /* should not happen */ | |
2628 | #ifdef DIAGNOSTIC | |
2629 | panic("ip6_getpcbopt: unexpected option\n"); | |
2630 | #endif | |
2631 | return (ENOPROTOOPT); | |
2632 | } | |
2633 | ||
2634 | error = sooptcopyout(sopt, optdata, optdatalen); | |
2635 | ||
2636 | return (error); | |
2637 | } | |
2638 | ||
2639 | void | |
2640 | ip6_clearpktopts(pktopt, optname) | |
2641 | struct ip6_pktopts *pktopt; | |
2642 | int optname; | |
2643 | { | |
2644 | if (pktopt == NULL) | |
2645 | return; | |
2646 | ||
2647 | if (optname == -1 || optname == IPV6_PKTINFO) { | |
2648 | if (pktopt->ip6po_pktinfo) | |
2649 | FREE(pktopt->ip6po_pktinfo, M_IP6OPT); | |
2650 | pktopt->ip6po_pktinfo = NULL; | |
2651 | } | |
2652 | if (optname == -1 || optname == IPV6_HOPLIMIT) | |
2653 | pktopt->ip6po_hlim = -1; | |
2654 | if (optname == -1 || optname == IPV6_TCLASS) | |
2655 | pktopt->ip6po_tclass = -1; | |
2656 | if (optname == -1 || optname == IPV6_NEXTHOP) { | |
2657 | if (pktopt->ip6po_nextroute.ro_rt) { | |
2658 | rtfree(pktopt->ip6po_nextroute.ro_rt); | |
2659 | pktopt->ip6po_nextroute.ro_rt = NULL; | |
2660 | } | |
2661 | if (pktopt->ip6po_nexthop) | |
2662 | FREE(pktopt->ip6po_nexthop, M_IP6OPT); | |
2663 | pktopt->ip6po_nexthop = NULL; | |
2664 | } | |
2665 | if (optname == -1 || optname == IPV6_HOPOPTS) { | |
2666 | if (pktopt->ip6po_hbh) | |
2667 | FREE(pktopt->ip6po_hbh, M_IP6OPT); | |
2668 | pktopt->ip6po_hbh = NULL; | |
2669 | } | |
2670 | if (optname == -1 || optname == IPV6_RTHDRDSTOPTS) { | |
2671 | if (pktopt->ip6po_dest1) | |
2672 | FREE(pktopt->ip6po_dest1, M_IP6OPT); | |
2673 | pktopt->ip6po_dest1 = NULL; | |
2674 | } | |
2675 | if (optname == -1 || optname == IPV6_RTHDR) { | |
2676 | if (pktopt->ip6po_rhinfo.ip6po_rhi_rthdr) | |
2677 | FREE(pktopt->ip6po_rhinfo.ip6po_rhi_rthdr, M_IP6OPT); | |
2678 | pktopt->ip6po_rhinfo.ip6po_rhi_rthdr = NULL; | |
2679 | if (pktopt->ip6po_route.ro_rt) { | |
2680 | rtfree(pktopt->ip6po_route.ro_rt); | |
2681 | pktopt->ip6po_route.ro_rt = NULL; | |
2682 | } | |
2683 | } | |
2684 | if (optname == -1 || optname == IPV6_DSTOPTS) { | |
2685 | if (pktopt->ip6po_dest2) | |
2686 | FREE(pktopt->ip6po_dest2, M_IP6OPT); | |
2687 | pktopt->ip6po_dest2 = NULL; | |
2688 | } | |
2689 | } | |
2690 | ||
2691 | #define PKTOPT_EXTHDRCPY(type) \ | |
2692 | do {\ | |
2693 | if (src->type) {\ | |
2694 | int hlen =\ | |
2695 | (((struct ip6_ext *)src->type)->ip6e_len + 1) << 3;\ | |
2696 | dst->type = _MALLOC(hlen, M_IP6OPT, canwait);\ | |
2697 | if (dst->type == NULL && canwait == M_NOWAIT)\ | |
2698 | goto bad;\ | |
2699 | bcopy(src->type, dst->type, hlen);\ | |
2700 | }\ | |
2701 | } while (0) | |
2702 | ||
2703 | static int | |
2704 | copypktopts(struct ip6_pktopts *dst, struct ip6_pktopts *src, int canwait) | |
2705 | { | |
2706 | if (dst == NULL || src == NULL) { | |
2707 | printf("ip6_clearpktopts: invalid argument\n"); | |
2708 | return (EINVAL); | |
2709 | } | |
2710 | ||
2711 | dst->ip6po_hlim = src->ip6po_hlim; | |
2712 | dst->ip6po_tclass = src->ip6po_tclass; | |
2713 | dst->ip6po_flags = src->ip6po_flags; | |
2714 | if (src->ip6po_pktinfo) { | |
2715 | dst->ip6po_pktinfo = _MALLOC(sizeof(*dst->ip6po_pktinfo), | |
2716 | M_IP6OPT, canwait); | |
2717 | if (dst->ip6po_pktinfo == NULL && canwait == M_NOWAIT) | |
2718 | goto bad; | |
2719 | *dst->ip6po_pktinfo = *src->ip6po_pktinfo; | |
2720 | } | |
2721 | if (src->ip6po_nexthop) { | |
2722 | dst->ip6po_nexthop = _MALLOC(src->ip6po_nexthop->sa_len, | |
2723 | M_IP6OPT, canwait); | |
2724 | if (dst->ip6po_nexthop == NULL && canwait == M_NOWAIT) | |
2725 | goto bad; | |
2726 | bcopy(src->ip6po_nexthop, dst->ip6po_nexthop, | |
2727 | src->ip6po_nexthop->sa_len); | |
2728 | } | |
2729 | PKTOPT_EXTHDRCPY(ip6po_hbh); | |
2730 | PKTOPT_EXTHDRCPY(ip6po_dest1); | |
2731 | PKTOPT_EXTHDRCPY(ip6po_dest2); | |
2732 | PKTOPT_EXTHDRCPY(ip6po_rthdr); /* not copy the cached route */ | |
2733 | return (0); | |
2734 | ||
2735 | bad: | |
2736 | ip6_clearpktopts(dst, -1); | |
2737 | return (ENOBUFS); | |
2738 | } | |
2739 | #undef PKTOPT_EXTHDRCPY | |
2740 | ||
2741 | struct ip6_pktopts * | |
2742 | ip6_copypktopts(struct ip6_pktopts *src, int canwait) | |
2743 | { | |
2744 | int error; | |
2745 | struct ip6_pktopts *dst; | |
2746 | ||
2747 | dst = _MALLOC(sizeof(*dst), M_IP6OPT, canwait); | |
2748 | if (dst == NULL) | |
2749 | return (NULL); | |
2750 | ip6_initpktopts(dst); | |
2751 | ||
2752 | if ((error = copypktopts(dst, src, canwait)) != 0) { | |
2753 | FREE(dst, M_IP6OPT); | |
2754 | return (NULL); | |
2755 | } | |
2756 | ||
2757 | return (dst); | |
2758 | } | |
2759 | ||
2760 | void | |
2761 | ip6_freepcbopts(pktopt) | |
2762 | struct ip6_pktopts *pktopt; | |
2763 | { | |
2764 | if (pktopt == NULL) | |
2765 | return; | |
2766 | ||
2767 | ip6_clearpktopts(pktopt, -1); | |
2768 | ||
2769 | FREE(pktopt, M_IP6OPT); | |
2770 | } | |
2771 | ||
2772 | void | |
2773 | ip6_moptions_init(void) | |
2774 | { | |
2775 | PE_parse_boot_argn("ifa_debug", &im6o_debug, sizeof (im6o_debug)); | |
2776 | ||
2777 | im6o_size = (im6o_debug == 0) ? sizeof (struct ip6_moptions) : | |
2778 | sizeof (struct ip6_moptions_dbg); | |
2779 | ||
2780 | im6o_zone = zinit(im6o_size, IM6O_ZONE_MAX * im6o_size, 0, | |
2781 | IM6O_ZONE_NAME); | |
2782 | if (im6o_zone == NULL) { | |
2783 | panic("%s: failed allocating %s", __func__, IM6O_ZONE_NAME); | |
2784 | /* NOTREACHED */ | |
2785 | } | |
2786 | zone_change(im6o_zone, Z_EXPAND, TRUE); | |
2787 | } | |
2788 | ||
2789 | void | |
2790 | im6o_addref(struct ip6_moptions *im6o, int locked) | |
2791 | { | |
2792 | if (!locked) | |
2793 | IM6O_LOCK(im6o); | |
2794 | else | |
2795 | IM6O_LOCK_ASSERT_HELD(im6o); | |
2796 | ||
2797 | if (++im6o->im6o_refcnt == 0) { | |
2798 | panic("%s: im6o %p wraparound refcnt\n", __func__, im6o); | |
2799 | /* NOTREACHED */ | |
2800 | } else if (im6o->im6o_trace != NULL) { | |
2801 | (*im6o->im6o_trace)(im6o, TRUE); | |
2802 | } | |
2803 | ||
2804 | if (!locked) | |
2805 | IM6O_UNLOCK(im6o); | |
2806 | } | |
2807 | ||
2808 | void | |
2809 | im6o_remref(struct ip6_moptions *im6o) | |
2810 | { | |
2811 | int i; | |
2812 | ||
2813 | IM6O_LOCK(im6o); | |
2814 | if (im6o->im6o_refcnt == 0) { | |
2815 | panic("%s: im6o %p negative refcnt", __func__, im6o); | |
2816 | /* NOTREACHED */ | |
2817 | } else if (im6o->im6o_trace != NULL) { | |
2818 | (*im6o->im6o_trace)(im6o, FALSE); | |
2819 | } | |
2820 | ||
2821 | --im6o->im6o_refcnt; | |
2822 | if (im6o->im6o_refcnt > 0) { | |
2823 | IM6O_UNLOCK(im6o); | |
2824 | return; | |
2825 | } | |
2826 | ||
2827 | for (i = 0; i < im6o->im6o_num_memberships; ++i) { | |
2828 | struct in6_mfilter *imf; | |
2829 | ||
2830 | imf = im6o->im6o_mfilters ? &im6o->im6o_mfilters[i] : NULL; | |
2831 | if (imf != NULL) | |
2832 | im6f_leave(imf); | |
2833 | ||
2834 | (void) in6_mc_leave(im6o->im6o_membership[i], imf); | |
2835 | ||
2836 | if (imf != NULL) | |
2837 | im6f_purge(imf); | |
2838 | ||
2839 | IN6M_REMREF(im6o->im6o_membership[i]); | |
2840 | im6o->im6o_membership[i] = NULL; | |
2841 | } | |
2842 | im6o->im6o_num_memberships = 0; | |
2843 | if (im6o->im6o_mfilters != NULL) { | |
2844 | FREE(im6o->im6o_mfilters, M_IN6MFILTER); | |
2845 | im6o->im6o_mfilters = NULL; | |
2846 | } | |
2847 | if (im6o->im6o_membership != NULL) { | |
2848 | FREE(im6o->im6o_membership, M_IP6MOPTS); | |
2849 | im6o->im6o_membership = NULL; | |
2850 | } | |
2851 | IM6O_UNLOCK(im6o); | |
2852 | ||
2853 | lck_mtx_destroy(&im6o->im6o_lock, ifa_mtx_grp); | |
2854 | ||
2855 | if (!(im6o->im6o_debug & IFD_ALLOC)) { | |
2856 | panic("%s: im6o %p cannot be freed", __func__, im6o); | |
2857 | /* NOTREACHED */ | |
2858 | } | |
2859 | zfree(im6o_zone, im6o); | |
2860 | } | |
2861 | ||
2862 | static void | |
2863 | im6o_trace(struct ip6_moptions *im6o, int refhold) | |
2864 | { | |
2865 | struct ip6_moptions_dbg *im6o_dbg = (struct ip6_moptions_dbg *)im6o; | |
2866 | ctrace_t *tr; | |
2867 | u_int32_t idx; | |
2868 | u_int16_t *cnt; | |
2869 | ||
2870 | if (!(im6o->im6o_debug & IFD_DEBUG)) { | |
2871 | panic("%s: im6o %p has no debug structure", __func__, im6o); | |
2872 | /* NOTREACHED */ | |
2873 | } | |
2874 | if (refhold) { | |
2875 | cnt = &im6o_dbg->im6o_refhold_cnt; | |
2876 | tr = im6o_dbg->im6o_refhold; | |
2877 | } else { | |
2878 | cnt = &im6o_dbg->im6o_refrele_cnt; | |
2879 | tr = im6o_dbg->im6o_refrele; | |
2880 | } | |
2881 | ||
2882 | idx = atomic_add_16_ov(cnt, 1) % IM6O_TRACE_HIST_SIZE; | |
2883 | ctrace_record(&tr[idx]); | |
2884 | } | |
2885 | ||
2886 | struct ip6_moptions * | |
2887 | ip6_allocmoptions(int how) | |
2888 | { | |
2889 | struct ip6_moptions *im6o; | |
2890 | ||
2891 | im6o = (how == M_WAITOK) ? | |
2892 | zalloc(im6o_zone) : zalloc_noblock(im6o_zone); | |
2893 | if (im6o != NULL) { | |
2894 | bzero(im6o, im6o_size); | |
2895 | lck_mtx_init(&im6o->im6o_lock, ifa_mtx_grp, ifa_mtx_attr); | |
2896 | im6o->im6o_debug |= IFD_ALLOC; | |
2897 | if (im6o_debug != 0) { | |
2898 | im6o->im6o_debug |= IFD_DEBUG; | |
2899 | im6o->im6o_trace = im6o_trace; | |
2900 | } | |
2901 | IM6O_ADDREF(im6o); | |
2902 | } | |
2903 | ||
2904 | return (im6o); | |
2905 | } | |
2906 | ||
2907 | /* | |
2908 | * Set IPv6 outgoing packet options based on advanced API. | |
2909 | */ | |
2910 | int | |
2911 | ip6_setpktopts(struct mbuf *control, struct ip6_pktopts *opt, | |
2912 | struct ip6_pktopts *stickyopt, int uproto) | |
2913 | { | |
2914 | struct cmsghdr *cm = 0; | |
2915 | ||
2916 | if (control == NULL || opt == NULL) | |
2917 | return (EINVAL); | |
2918 | ||
2919 | ip6_initpktopts(opt); | |
2920 | if (stickyopt) { | |
2921 | int error; | |
2922 | ||
2923 | /* | |
2924 | * If stickyopt is provided, make a local copy of the options | |
2925 | * for this particular packet, then override them by ancillary | |
2926 | * objects. | |
2927 | * XXX: copypktopts() does not copy the cached route to a next | |
2928 | * hop (if any). This is not very good in terms of efficiency, | |
2929 | * but we can allow this since this option should be rarely | |
2930 | * used. | |
2931 | */ | |
2932 | if ((error = copypktopts(opt, stickyopt, M_NOWAIT)) != 0) | |
2933 | return (error); | |
2934 | } | |
2935 | ||
2936 | /* | |
2937 | * XXX: Currently, we assume all the optional information is stored | |
2938 | * in a single mbuf. | |
2939 | */ | |
2940 | if (control->m_next) | |
2941 | return (EINVAL); | |
2942 | ||
2943 | if (control->m_len < CMSG_LEN(0)) | |
2944 | return (EINVAL); | |
2945 | ||
2946 | for (cm = M_FIRST_CMSGHDR(control); cm; cm = M_NXT_CMSGHDR(control, cm)) { | |
2947 | int error; | |
2948 | ||
2949 | if (cm->cmsg_len < sizeof(struct cmsghdr) || cm->cmsg_len > control->m_len) | |
2950 | return (EINVAL); | |
2951 | if (cm->cmsg_level != IPPROTO_IPV6) | |
2952 | continue; | |
2953 | ||
2954 | error = ip6_setpktopt(cm->cmsg_type, CMSG_DATA(cm), | |
2955 | cm->cmsg_len - CMSG_LEN(0), opt, 0, 1, uproto); | |
2956 | if (error) | |
2957 | return (error); | |
2958 | } | |
2959 | ||
2960 | return (0); | |
2961 | } | |
2962 | /* | |
2963 | * Set a particular packet option, as a sticky option or an ancillary data | |
2964 | * item. "len" can be 0 only when it's a sticky option. | |
2965 | * We have 4 cases of combination of "sticky" and "cmsg": | |
2966 | * "sticky=0, cmsg=0": impossible | |
2967 | * "sticky=0, cmsg=1": RFC2292 or RFC3542 ancillary data | |
2968 | * "sticky=1, cmsg=0": RFC3542 socket option | |
2969 | * "sticky=1, cmsg=1": RFC2292 socket option | |
2970 | */ | |
2971 | static int | |
2972 | ip6_setpktopt(int optname, u_char *buf, int len, struct ip6_pktopts *opt, | |
2973 | int sticky, int cmsg, int uproto) | |
2974 | { | |
2975 | int minmtupolicy, preftemp; | |
2976 | int error; | |
2977 | ||
2978 | if (!sticky && !cmsg) { | |
2979 | #ifdef DIAGNOSTIC | |
2980 | printf("ip6_setpktopt: impossible case\n"); | |
2981 | #endif | |
2982 | return (EINVAL); | |
2983 | } | |
2984 | ||
2985 | /* | |
2986 | * IPV6_2292xxx is for backward compatibility to RFC2292, and should | |
2987 | * not be specified in the context of RFC3542. Conversely, | |
2988 | * RFC3542 types should not be specified in the context of RFC2292. | |
2989 | */ | |
2990 | if (!cmsg) { | |
2991 | switch (optname) { | |
2992 | case IPV6_2292PKTINFO: | |
2993 | case IPV6_2292HOPLIMIT: | |
2994 | case IPV6_2292NEXTHOP: | |
2995 | case IPV6_2292HOPOPTS: | |
2996 | case IPV6_2292DSTOPTS: | |
2997 | case IPV6_2292RTHDR: | |
2998 | case IPV6_2292PKTOPTIONS: | |
2999 | return (ENOPROTOOPT); | |
3000 | } | |
3001 | } | |
3002 | if (sticky && cmsg) { | |
3003 | switch (optname) { | |
3004 | case IPV6_PKTINFO: | |
3005 | case IPV6_HOPLIMIT: | |
3006 | case IPV6_NEXTHOP: | |
3007 | case IPV6_HOPOPTS: | |
3008 | case IPV6_DSTOPTS: | |
3009 | case IPV6_RTHDRDSTOPTS: | |
3010 | case IPV6_RTHDR: | |
3011 | case IPV6_USE_MIN_MTU: | |
3012 | case IPV6_DONTFRAG: | |
3013 | case IPV6_TCLASS: | |
3014 | case IPV6_PREFER_TEMPADDR: /* XXX: not an RFC3542 option */ | |
3015 | return (ENOPROTOOPT); | |
3016 | } | |
3017 | } | |
3018 | ||
3019 | switch (optname) { | |
3020 | case IPV6_2292PKTINFO: | |
3021 | case IPV6_PKTINFO: | |
3022 | { | |
3023 | struct ifnet *ifp = NULL; | |
3024 | struct in6_pktinfo *pktinfo; | |
3025 | ||
3026 | if (len != sizeof(struct in6_pktinfo)) | |
3027 | return (EINVAL); | |
3028 | ||
3029 | pktinfo = (struct in6_pktinfo *)buf; | |
3030 | ||
3031 | /* | |
3032 | * An application can clear any sticky IPV6_PKTINFO option by | |
3033 | * doing a "regular" setsockopt with ipi6_addr being | |
3034 | * in6addr_any and ipi6_ifindex being zero. | |
3035 | * [RFC 3542, Section 6] | |
3036 | */ | |
3037 | if (optname == IPV6_PKTINFO && opt->ip6po_pktinfo && | |
3038 | pktinfo->ipi6_ifindex == 0 && | |
3039 | IN6_IS_ADDR_UNSPECIFIED(&pktinfo->ipi6_addr)) { | |
3040 | ip6_clearpktopts(opt, optname); | |
3041 | break; | |
3042 | } | |
3043 | ||
3044 | if (uproto == IPPROTO_TCP && optname == IPV6_PKTINFO && | |
3045 | sticky && !IN6_IS_ADDR_UNSPECIFIED(&pktinfo->ipi6_addr)) { | |
3046 | return (EINVAL); | |
3047 | } | |
3048 | ||
3049 | /* validate the interface index if specified. */ | |
3050 | ifnet_head_lock_shared(); | |
3051 | ||
3052 | if (pktinfo->ipi6_ifindex > if_index) { | |
3053 | ifnet_head_done(); | |
3054 | return (ENXIO); | |
3055 | } | |
3056 | ||
3057 | if (pktinfo->ipi6_ifindex) { | |
3058 | ifp = ifindex2ifnet[pktinfo->ipi6_ifindex]; | |
3059 | if (ifp == NULL) { | |
3060 | ifnet_head_done(); | |
3061 | return (ENXIO); | |
3062 | } | |
3063 | } | |
3064 | ||
3065 | ifnet_head_done(); | |
3066 | ||
3067 | /* | |
3068 | * We store the address anyway, and let in6_selectsrc() | |
3069 | * validate the specified address. This is because ipi6_addr | |
3070 | * may not have enough information about its scope zone, and | |
3071 | * we may need additional information (such as outgoing | |
3072 | * interface or the scope zone of a destination address) to | |
3073 | * disambiguate the scope. | |
3074 | * XXX: the delay of the validation may confuse the | |
3075 | * application when it is used as a sticky option. | |
3076 | */ | |
3077 | if (opt->ip6po_pktinfo == NULL) { | |
3078 | opt->ip6po_pktinfo = _MALLOC(sizeof(*pktinfo), | |
3079 | M_IP6OPT, M_NOWAIT); | |
3080 | if (opt->ip6po_pktinfo == NULL) | |
3081 | return (ENOBUFS); | |
3082 | } | |
3083 | bcopy(pktinfo, opt->ip6po_pktinfo, sizeof(*pktinfo)); | |
3084 | break; | |
3085 | } | |
3086 | ||
3087 | case IPV6_2292HOPLIMIT: | |
3088 | case IPV6_HOPLIMIT: | |
3089 | { | |
3090 | int *hlimp; | |
3091 | ||
3092 | /* | |
3093 | * RFC 3542 deprecated the usage of sticky IPV6_HOPLIMIT | |
3094 | * to simplify the ordering among hoplimit options. | |
3095 | */ | |
3096 | if (optname == IPV6_HOPLIMIT && sticky) | |
3097 | return (ENOPROTOOPT); | |
3098 | ||
3099 | if (len != sizeof(int)) | |
3100 | return (EINVAL); | |
3101 | hlimp = (int *)buf; | |
3102 | if (*hlimp < -1 || *hlimp > 255) | |
3103 | return (EINVAL); | |
3104 | ||
3105 | opt->ip6po_hlim = *hlimp; | |
3106 | break; | |
3107 | } | |
3108 | ||
3109 | case IPV6_TCLASS: | |
3110 | { | |
3111 | int tclass; | |
3112 | ||
3113 | if (len != sizeof(int)) | |
3114 | return (EINVAL); | |
3115 | tclass = *(int *)buf; | |
3116 | if (tclass < -1 || tclass > 255) | |
3117 | return (EINVAL); | |
3118 | ||
3119 | opt->ip6po_tclass = tclass; | |
3120 | break; | |
3121 | } | |
3122 | ||
3123 | case IPV6_2292NEXTHOP: | |
3124 | case IPV6_NEXTHOP: | |
3125 | error = suser(kauth_cred_get(), 0); | |
3126 | if (error) | |
3127 | return (EACCES); | |
3128 | ||
3129 | if (len == 0) { /* just remove the option */ | |
3130 | ip6_clearpktopts(opt, IPV6_NEXTHOP); | |
3131 | break; | |
3132 | } | |
3133 | ||
3134 | /* check if cmsg_len is large enough for sa_len */ | |
3135 | if (len < sizeof(struct sockaddr) || len < *buf) | |
3136 | return (EINVAL); | |
3137 | ||
3138 | switch (((struct sockaddr *)buf)->sa_family) { | |
3139 | case AF_INET6: | |
3140 | { | |
3141 | struct sockaddr_in6 *sa6 = (struct sockaddr_in6 *)buf; | |
3142 | ||
3143 | if (sa6->sin6_len != sizeof(struct sockaddr_in6)) | |
3144 | return (EINVAL); | |
3145 | ||
3146 | if (IN6_IS_ADDR_UNSPECIFIED(&sa6->sin6_addr) || | |
3147 | IN6_IS_ADDR_MULTICAST(&sa6->sin6_addr)) { | |
3148 | return (EINVAL); | |
3149 | } | |
3150 | if ((error = sa6_embedscope(sa6, ip6_use_defzone)) | |
3151 | != 0) { | |
3152 | return (error); | |
3153 | } | |
3154 | break; | |
3155 | } | |
3156 | case AF_LINK: /* should eventually be supported */ | |
3157 | default: | |
3158 | return (EAFNOSUPPORT); | |
3159 | } | |
3160 | ||
3161 | /* turn off the previous option, then set the new option. */ | |
3162 | ip6_clearpktopts(opt, IPV6_NEXTHOP); | |
3163 | opt->ip6po_nexthop = _MALLOC(*buf, M_IP6OPT, M_NOWAIT); | |
3164 | if (opt->ip6po_nexthop == NULL) | |
3165 | return (ENOBUFS); | |
3166 | bcopy(buf, opt->ip6po_nexthop, *buf); | |
3167 | break; | |
3168 | ||
3169 | case IPV6_2292HOPOPTS: | |
3170 | case IPV6_HOPOPTS: | |
3171 | { | |
3172 | struct ip6_hbh *hbh; | |
3173 | int hbhlen; | |
3174 | ||
3175 | /* | |
3176 | * XXX: We don't allow a non-privileged user to set ANY HbH | |
3177 | * options, since per-option restriction has too much | |
3178 | * overhead. | |
3179 | */ | |
3180 | error = suser(kauth_cred_get(), 0); | |
3181 | if (error) | |
3182 | return (EACCES); | |
3183 | ||
3184 | if (len == 0) { | |
3185 | ip6_clearpktopts(opt, IPV6_HOPOPTS); | |
3186 | break; /* just remove the option */ | |
3187 | } | |
3188 | ||
3189 | /* message length validation */ | |
3190 | if (len < sizeof(struct ip6_hbh)) | |
3191 | return (EINVAL); | |
3192 | hbh = (struct ip6_hbh *)buf; | |
3193 | hbhlen = (hbh->ip6h_len + 1) << 3; | |
3194 | if (len != hbhlen) | |
3195 | return (EINVAL); | |
3196 | ||
3197 | /* turn off the previous option, then set the new option. */ | |
3198 | ip6_clearpktopts(opt, IPV6_HOPOPTS); | |
3199 | opt->ip6po_hbh = _MALLOC(hbhlen, M_IP6OPT, M_NOWAIT); | |
3200 | if (opt->ip6po_hbh == NULL) | |
3201 | return (ENOBUFS); | |
3202 | bcopy(hbh, opt->ip6po_hbh, hbhlen); | |
3203 | ||
3204 | break; | |
3205 | } | |
3206 | ||
3207 | case IPV6_2292DSTOPTS: | |
3208 | case IPV6_DSTOPTS: | |
3209 | case IPV6_RTHDRDSTOPTS: | |
3210 | { | |
3211 | struct ip6_dest *dest, **newdest = NULL; | |
3212 | int destlen; | |
3213 | ||
3214 | error = suser(kauth_cred_get(), 0); | |
3215 | if (error) | |
3216 | return (EACCES); | |
3217 | ||
3218 | if (len == 0) { | |
3219 | ip6_clearpktopts(opt, optname); | |
3220 | break; /* just remove the option */ | |
3221 | } | |
3222 | ||
3223 | /* message length validation */ | |
3224 | if (len < sizeof(struct ip6_dest)) | |
3225 | return (EINVAL); | |
3226 | dest = (struct ip6_dest *)buf; | |
3227 | destlen = (dest->ip6d_len + 1) << 3; | |
3228 | if (len != destlen) | |
3229 | return (EINVAL); | |
3230 | ||
3231 | /* | |
3232 | * Determine the position that the destination options header | |
3233 | * should be inserted; before or after the routing header. | |
3234 | */ | |
3235 | switch (optname) { | |
3236 | case IPV6_2292DSTOPTS: | |
3237 | /* | |
3238 | * The old advacned API is ambiguous on this point. | |
3239 | * Our approach is to determine the position based | |
3240 | * according to the existence of a routing header. | |
3241 | * Note, however, that this depends on the order of the | |
3242 | * extension headers in the ancillary data; the 1st | |
3243 | * part of the destination options header must appear | |
3244 | * before the routing header in the ancillary data, | |
3245 | * too. | |
3246 | * RFC3542 solved the ambiguity by introducing | |
3247 | * separate ancillary data or option types. | |
3248 | */ | |
3249 | if (opt->ip6po_rthdr == NULL) | |
3250 | newdest = &opt->ip6po_dest1; | |
3251 | else | |
3252 | newdest = &opt->ip6po_dest2; | |
3253 | break; | |
3254 | case IPV6_RTHDRDSTOPTS: | |
3255 | newdest = &opt->ip6po_dest1; | |
3256 | break; | |
3257 | case IPV6_DSTOPTS: | |
3258 | newdest = &opt->ip6po_dest2; | |
3259 | break; | |
3260 | } | |
3261 | ||
3262 | /* turn off the previous option, then set the new option. */ | |
3263 | ip6_clearpktopts(opt, optname); | |
3264 | *newdest = _MALLOC(destlen, M_IP6OPT, M_NOWAIT); | |
3265 | if (*newdest == NULL) | |
3266 | return (ENOBUFS); | |
3267 | bcopy(dest, *newdest, destlen); | |
3268 | ||
3269 | break; | |
3270 | } | |
3271 | ||
3272 | case IPV6_2292RTHDR: | |
3273 | case IPV6_RTHDR: | |
3274 | { | |
3275 | struct ip6_rthdr *rth; | |
3276 | int rthlen; | |
3277 | ||
3278 | if (len == 0) { | |
3279 | ip6_clearpktopts(opt, IPV6_RTHDR); | |
3280 | break; /* just remove the option */ | |
3281 | } | |
3282 | ||
3283 | /* message length validation */ | |
3284 | if (len < sizeof(struct ip6_rthdr)) | |
3285 | return (EINVAL); | |
3286 | rth = (struct ip6_rthdr *)buf; | |
3287 | rthlen = (rth->ip6r_len + 1) << 3; | |
3288 | if (len != rthlen) | |
3289 | return (EINVAL); | |
3290 | ||
3291 | switch (rth->ip6r_type) { | |
3292 | case IPV6_RTHDR_TYPE_0: | |
3293 | if (rth->ip6r_len == 0) /* must contain one addr */ | |
3294 | return (EINVAL); | |
3295 | if (rth->ip6r_len % 2) /* length must be even */ | |
3296 | return (EINVAL); | |
3297 | if (rth->ip6r_len / 2 != rth->ip6r_segleft) | |
3298 | return (EINVAL); | |
3299 | break; | |
3300 | default: | |
3301 | return (EINVAL); /* not supported */ | |
3302 | } | |
3303 | ||
3304 | /* turn off the previous option */ | |
3305 | ip6_clearpktopts(opt, IPV6_RTHDR); | |
3306 | opt->ip6po_rthdr = _MALLOC(rthlen, M_IP6OPT, M_NOWAIT); | |
3307 | if (opt->ip6po_rthdr == NULL) | |
3308 | return (ENOBUFS); | |
3309 | bcopy(rth, opt->ip6po_rthdr, rthlen); | |
3310 | ||
3311 | break; | |
3312 | } | |
3313 | ||
3314 | case IPV6_USE_MIN_MTU: | |
3315 | if (len != sizeof(int)) | |
3316 | return (EINVAL); | |
3317 | minmtupolicy = *(int *)buf; | |
3318 | if (minmtupolicy != IP6PO_MINMTU_MCASTONLY && | |
3319 | minmtupolicy != IP6PO_MINMTU_DISABLE && | |
3320 | minmtupolicy != IP6PO_MINMTU_ALL) { | |
3321 | return (EINVAL); | |
3322 | } | |
3323 | opt->ip6po_minmtu = minmtupolicy; | |
3324 | break; | |
3325 | ||
3326 | case IPV6_DONTFRAG: | |
3327 | if (len != sizeof(int)) | |
3328 | return (EINVAL); | |
3329 | ||
3330 | if (uproto == IPPROTO_TCP || *(int *)buf == 0) { | |
3331 | /* | |
3332 | * we ignore this option for TCP sockets. | |
3333 | * (RFC3542 leaves this case unspecified.) | |
3334 | */ | |
3335 | opt->ip6po_flags &= ~IP6PO_DONTFRAG; | |
3336 | } else | |
3337 | opt->ip6po_flags |= IP6PO_DONTFRAG; | |
3338 | break; | |
3339 | ||
3340 | case IPV6_PREFER_TEMPADDR: | |
3341 | if (len != sizeof(int)) | |
3342 | return (EINVAL); | |
3343 | preftemp = *(int *)buf; | |
3344 | if (preftemp != IP6PO_TEMPADDR_SYSTEM && | |
3345 | preftemp != IP6PO_TEMPADDR_NOTPREFER && | |
3346 | preftemp != IP6PO_TEMPADDR_PREFER) { | |
3347 | return (EINVAL); | |
3348 | } | |
3349 | opt->ip6po_prefer_tempaddr = preftemp; | |
3350 | break; | |
3351 | ||
3352 | default: | |
3353 | return (ENOPROTOOPT); | |
3354 | } /* end of switch */ | |
3355 | ||
3356 | return (0); | |
3357 | } | |
3358 | ||
3359 | /* | |
3360 | * Routine called from ip6_output() to loop back a copy of an IP6 multicast | |
3361 | * packet to the input queue of a specified interface. Note that this | |
3362 | * calls the output routine of the loopback "driver", but with an interface | |
3363 | * pointer that might NOT be &loif -- easier than replicating that code here. | |
3364 | */ | |
3365 | void | |
3366 | ip6_mloopback( | |
3367 | struct ifnet *ifp, | |
3368 | struct mbuf *m, | |
3369 | struct sockaddr_in6 *dst) | |
3370 | { | |
3371 | struct mbuf *copym; | |
3372 | struct ip6_hdr *ip6; | |
3373 | ||
3374 | copym = m_copy(m, 0, M_COPYALL); | |
3375 | if (copym == NULL) | |
3376 | return; | |
3377 | ||
3378 | /* | |
3379 | * Make sure to deep-copy IPv6 header portion in case the data | |
3380 | * is in an mbuf cluster, so that we can safely override the IPv6 | |
3381 | * header portion later. | |
3382 | */ | |
3383 | if ((copym->m_flags & M_EXT) != 0 || | |
3384 | copym->m_len < sizeof(struct ip6_hdr)) { | |
3385 | copym = m_pullup(copym, sizeof(struct ip6_hdr)); | |
3386 | if (copym == NULL) | |
3387 | return; | |
3388 | } | |
3389 | ||
3390 | #if DIAGNOSTIC | |
3391 | if (copym->m_len < sizeof(*ip6)) { | |
3392 | m_freem(copym); | |
3393 | return; | |
3394 | } | |
3395 | #endif | |
3396 | ||
3397 | ip6 = mtod(copym, struct ip6_hdr *); | |
3398 | /* | |
3399 | * clear embedded scope identifiers if necessary. | |
3400 | * in6_clearscope will touch the addresses only when necessary. | |
3401 | */ | |
3402 | in6_clearscope(&ip6->ip6_src); | |
3403 | in6_clearscope(&ip6->ip6_dst); | |
3404 | ||
3405 | #ifdef __APPLE__ | |
3406 | ||
3407 | /* Makes sure the HW checksum flags are cleaned before sending the packet */ | |
3408 | ||
3409 | if ((copym->m_pkthdr.csum_flags & CSUM_DELAY_IPV6_DATA) != 0) { | |
3410 | in6_delayed_cksum(copym, sizeof(struct ip6_hdr)); | |
3411 | copym->m_pkthdr.csum_flags &= ~CSUM_DELAY_IPV6_DATA; | |
3412 | } | |
3413 | copym->m_pkthdr.rcvif = 0; | |
3414 | copym->m_pkthdr.csum_data = 0; | |
3415 | copym->m_pkthdr.csum_flags = 0; | |
3416 | ||
3417 | if (lo_ifp) { | |
3418 | copym->m_pkthdr.rcvif = ifp; | |
3419 | dlil_output(lo_ifp, PF_INET6, copym, 0, (struct sockaddr *)dst, 0); | |
3420 | } else | |
3421 | m_free(copym); | |
3422 | #else | |
3423 | (void)if_simloop(ifp, copym, dst->sin6_family, NULL); | |
3424 | #endif | |
3425 | } | |
3426 | ||
3427 | /* | |
3428 | * Chop IPv6 header off from the payload. | |
3429 | */ | |
3430 | static int | |
3431 | ip6_splithdr(m, exthdrs) | |
3432 | struct mbuf *m; | |
3433 | struct ip6_exthdrs *exthdrs; | |
3434 | { | |
3435 | struct mbuf *mh; | |
3436 | struct ip6_hdr *ip6; | |
3437 | ||
3438 | ip6 = mtod(m, struct ip6_hdr *); | |
3439 | if (m->m_len > sizeof(*ip6)) { | |
3440 | MGETHDR(mh, M_DONTWAIT, MT_HEADER); /* MAC-OK */ | |
3441 | if (mh == 0) { | |
3442 | m_freem(m); | |
3443 | return ENOBUFS; | |
3444 | } | |
3445 | M_COPY_PKTHDR(mh, m); | |
3446 | MH_ALIGN(mh, sizeof(*ip6)); | |
3447 | m->m_flags &= ~M_PKTHDR; | |
3448 | m->m_len -= sizeof(*ip6); | |
3449 | m->m_data += sizeof(*ip6); | |
3450 | mh->m_next = m; | |
3451 | m = mh; | |
3452 | m->m_len = sizeof(*ip6); | |
3453 | bcopy((caddr_t)ip6, mtod(m, caddr_t), sizeof(*ip6)); | |
3454 | } | |
3455 | exthdrs->ip6e_ip6 = m; | |
3456 | return 0; | |
3457 | } | |
3458 | ||
3459 | /* | |
3460 | * Compute IPv6 extension header length. | |
3461 | */ | |
3462 | int | |
3463 | ip6_optlen(in6p) | |
3464 | struct in6pcb *in6p; | |
3465 | { | |
3466 | int len; | |
3467 | ||
3468 | if (!in6p->in6p_outputopts) | |
3469 | return 0; | |
3470 | ||
3471 | len = 0; | |
3472 | #define elen(x) \ | |
3473 | (((struct ip6_ext *)(x)) ? (((struct ip6_ext *)(x))->ip6e_len + 1) << 3 : 0) | |
3474 | ||
3475 | len += elen(in6p->in6p_outputopts->ip6po_hbh); | |
3476 | if (in6p->in6p_outputopts->ip6po_rthdr) | |
3477 | /* dest1 is valid with rthdr only */ | |
3478 | len += elen(in6p->in6p_outputopts->ip6po_dest1); | |
3479 | len += elen(in6p->in6p_outputopts->ip6po_rthdr); | |
3480 | len += elen(in6p->in6p_outputopts->ip6po_dest2); | |
3481 | return len; | |
3482 | #undef elen | |
3483 | } |