]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * Copyright (c) 1999-2009 Apple, Inc. All rights reserved. | |
3 | * | |
4 | * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ | |
5 | * | |
6 | * This file contains Original Code and/or Modifications of Original Code | |
7 | * as defined in and that are subject to the Apple Public Source License | |
8 | * Version 2.0 (the 'License'). You may not use this file except in | |
9 | * compliance with the License. The rights granted to you under the License | |
10 | * may not be used to create, or enable the creation or redistribution of, | |
11 | * unlawful or unlicensed copies of an Apple operating system, or to | |
12 | * circumvent, violate, or enable the circumvention or violation of, any | |
13 | * terms of an Apple operating system software license agreement. | |
14 | * | |
15 | * Please obtain a copy of the License at | |
16 | * http://www.opensource.apple.com/apsl/ and read it before using this file. | |
17 | * | |
18 | * The Original Code and all software distributed under the License are | |
19 | * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER | |
20 | * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, | |
21 | * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, | |
22 | * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. | |
23 | * Please see the License for the specific language governing rights and | |
24 | * limitations under the License. | |
25 | * | |
26 | * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ | |
27 | */ | |
28 | ||
29 | /* | |
30 | WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! | |
31 | ||
32 | THIS FILE IS NEEDED TO PASS FIPS ACCEPTANCE FOR THE RANDOM NUMBER GENERATOR. | |
33 | IF YOU ALTER IT IN ANY WAY, WE WILL NEED TO GO THOUGH FIPS ACCEPTANCE AGAIN, | |
34 | AN OPERATION THAT IS VERY EXPENSIVE AND TIME CONSUMING. IN OTHER WORDS, | |
35 | DON'T MESS WITH THIS FILE. | |
36 | ||
37 | WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! | |
38 | */ | |
39 | ||
40 | #include <sys/param.h> | |
41 | #include <sys/systm.h> | |
42 | #include <sys/proc.h> | |
43 | #include <sys/errno.h> | |
44 | #include <sys/ioctl.h> | |
45 | #include <sys/conf.h> | |
46 | #include <sys/fcntl.h> | |
47 | #include <string.h> | |
48 | #include <miscfs/devfs/devfs.h> | |
49 | #include <kern/lock.h> | |
50 | #include <kern/clock.h> | |
51 | #include <sys/time.h> | |
52 | #include <sys/malloc.h> | |
53 | #include <sys/uio_internal.h> | |
54 | ||
55 | #include <dev/random/randomdev.h> | |
56 | #include <dev/random/YarrowCoreLib/include/yarrow.h> | |
57 | ||
58 | #include <libkern/OSByteOrder.h> | |
59 | ||
60 | #include <mach/mach_time.h> | |
61 | #include <machine/machine_routines.h> | |
62 | ||
63 | #include "fips_sha1.h" | |
64 | ||
65 | #define RANDOM_MAJOR -1 /* let the kernel pick the device number */ | |
66 | ||
67 | d_ioctl_t random_ioctl; | |
68 | ||
69 | /* | |
70 | * A struct describing which functions will get invoked for certain | |
71 | * actions. | |
72 | */ | |
73 | static struct cdevsw random_cdevsw = | |
74 | { | |
75 | random_open, /* open */ | |
76 | random_close, /* close */ | |
77 | random_read, /* read */ | |
78 | random_write, /* write */ | |
79 | random_ioctl, /* ioctl */ | |
80 | (stop_fcn_t *)nulldev, /* stop */ | |
81 | (reset_fcn_t *)nulldev, /* reset */ | |
82 | NULL, /* tty's */ | |
83 | eno_select, /* select */ | |
84 | eno_mmap, /* mmap */ | |
85 | eno_strat, /* strategy */ | |
86 | eno_getc, /* getc */ | |
87 | eno_putc, /* putc */ | |
88 | 0 /* type */ | |
89 | }; | |
90 | ||
91 | ||
92 | /* | |
93 | WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! | |
94 | ||
95 | ANY CODE PROTECTED UNDER "#ifdef __arm__" IS SERIOUSLY SUPPOSED TO BE THERE! | |
96 | IF YOU REMOVE ARM CODE, RANDOM WILL NOT MEAN ANYTHING FOR iPHONES ALL OVER. | |
97 | PLEASE DON'T TOUCH __arm__ CODE IN THIS FILE! | |
98 | ||
99 | WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! | |
100 | */ | |
101 | ||
102 | ||
103 | /* Used to detect whether we've already been initialized */ | |
104 | static int gRandomInstalled = 0; | |
105 | static PrngRef gPrngRef; | |
106 | static int gRandomError = 1; | |
107 | static lck_grp_t *gYarrowGrp; | |
108 | static lck_attr_t *gYarrowAttr; | |
109 | static lck_grp_attr_t *gYarrowGrpAttr; | |
110 | static lck_mtx_t *gYarrowMutex = 0; | |
111 | ||
112 | #define RESEED_TICKS 50 /* how long a reseed operation can take */ | |
113 | ||
114 | ||
115 | typedef u_int8_t BlockWord; | |
116 | enum {kBSize = 20}; | |
117 | typedef BlockWord Block[kBSize]; | |
118 | enum {kBlockSize = sizeof(Block)}; | |
119 | ||
120 | /* define prototypes to keep the compiler happy... */ | |
121 | ||
122 | void add_blocks(Block a, Block b, BlockWord carry); | |
123 | void fips_initialize(void); | |
124 | void random_block(Block b, int addOptional); | |
125 | u_int32_t CalculateCRC(u_int8_t* buffer, size_t length); | |
126 | ||
127 | /* | |
128 | * Get 120 bits from yarrow | |
129 | */ | |
130 | ||
131 | /* | |
132 | * add block b to block a | |
133 | */ | |
134 | void | |
135 | add_blocks(Block a, Block b, BlockWord carry) | |
136 | { | |
137 | int i = kBlockSize - 1; | |
138 | while (i >= 0) | |
139 | { | |
140 | u_int32_t c = (u_int32_t)carry + | |
141 | (u_int32_t)a[i] + | |
142 | (u_int32_t)b[i]; | |
143 | a[i] = c & 0xff; | |
144 | carry = c >> 8; | |
145 | i -= 1; | |
146 | } | |
147 | } | |
148 | ||
149 | ||
150 | ||
151 | static char zeros[(512 - kBSize * 8) / 8]; | |
152 | static Block g_xkey; | |
153 | static Block g_random_data; | |
154 | static int g_bytes_used; | |
155 | static unsigned char g_SelfTestInitialized = 0; | |
156 | static u_int32_t gLastBlockChecksum; | |
157 | ||
158 | static const u_int32_t g_crc_table[] = | |
159 | { | |
160 | 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, | |
161 | 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, | |
162 | 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, | |
163 | 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, | |
164 | 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, | |
165 | 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, | |
166 | 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, | |
167 | 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, | |
168 | 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, | |
169 | 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, | |
170 | 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, | |
171 | 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, | |
172 | 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, | |
173 | 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, | |
174 | 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, | |
175 | 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, | |
176 | 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, | |
177 | 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, | |
178 | 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, | |
179 | 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, | |
180 | 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, | |
181 | 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, | |
182 | 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, | |
183 | 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, | |
184 | 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, | |
185 | 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, | |
186 | 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, | |
187 | 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, | |
188 | 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, | |
189 | 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, | |
190 | 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, | |
191 | 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D, | |
192 | }; | |
193 | ||
194 | /* | |
195 | * Setup for fips compliance | |
196 | */ | |
197 | ||
198 | /* | |
199 | * calculate a crc-32 checksum | |
200 | */ | |
201 | u_int32_t CalculateCRC(u_int8_t* buffer, size_t length) | |
202 | { | |
203 | u_int32_t crc = 0; | |
204 | ||
205 | size_t i; | |
206 | for (i = 0; i < length; ++i) | |
207 | { | |
208 | u_int32_t temp = (crc ^ ((u_int32_t) buffer[i])) & 0xFF; | |
209 | crc = (crc >> 8) ^ g_crc_table[temp]; | |
210 | } | |
211 | ||
212 | return crc; | |
213 | } | |
214 | ||
215 | /* | |
216 | * get a random block of data per fips 186-2 | |
217 | */ | |
218 | void | |
219 | random_block(Block b, int addOptional) | |
220 | { | |
221 | SHA1_CTX sha1_ctx; | |
222 | ||
223 | int repeatCount = 0; | |
224 | do | |
225 | { | |
226 | // do one iteration | |
227 | ||
228 | if (addOptional) | |
229 | { | |
230 | // create an xSeed to add. | |
231 | Block xSeed; | |
232 | prngOutput (gPrngRef, (BYTE*) &xSeed, sizeof (xSeed)); | |
233 | ||
234 | // add the seed to the previous value of g_xkey | |
235 | add_blocks (g_xkey, xSeed, 0); | |
236 | } | |
237 | ||
238 | // initialize the value of H | |
239 | FIPS_SHA1Init(&sha1_ctx); | |
240 | ||
241 | // to stay compatible with the FIPS specification, we need to flip the bytes in | |
242 | // g_xkey to little endian byte order. In our case, this makes exactly no difference | |
243 | // (random is random), but we need to do it anyway to keep FIPS happy | |
244 | ||
245 | // compute "G" | |
246 | FIPS_SHA1Update(&sha1_ctx, g_xkey, kBlockSize); | |
247 | ||
248 | // add zeros to fill the internal SHA-1 buffer | |
249 | FIPS_SHA1Update (&sha1_ctx, (const u_int8_t *)zeros, sizeof (zeros)); | |
250 | ||
251 | // we have to do a byte order correction here because the sha1 math is being done internally | |
252 | // as u_int32_t, not a stream of bytes. Since we maintain our data as a byte stream, we need | |
253 | // to convert | |
254 | ||
255 | u_int32_t* finger = (u_int32_t*) b; | |
256 | ||
257 | unsigned j; | |
258 | for (j = 0; j < kBlockSize / sizeof (u_int32_t); ++j) | |
259 | { | |
260 | *finger++ = OSSwapHostToBigInt32(sha1_ctx.h.b32[j]); | |
261 | } | |
262 | ||
263 | // calculate the CRC-32 of the block | |
264 | u_int32_t new_crc = CalculateCRC(sha1_ctx.h.b8, sizeof (Block)); | |
265 | ||
266 | // make sure we don't repeat | |
267 | int cmp = new_crc == gLastBlockChecksum; | |
268 | gLastBlockChecksum = new_crc; | |
269 | if (!g_SelfTestInitialized) | |
270 | { | |
271 | g_SelfTestInitialized = 1; | |
272 | return; | |
273 | } | |
274 | else if (!cmp) | |
275 | { | |
276 | return; | |
277 | } | |
278 | ||
279 | repeatCount += 1; | |
280 | ||
281 | // fix up the next value of g_xkey | |
282 | add_blocks (g_xkey, b, 1); | |
283 | } while (repeatCount < 2); | |
284 | ||
285 | /* | |
286 | * If we got here, three sucessive checksums of the random number | |
287 | * generator have been the same. Since the odds of this happening are | |
288 | * 1 in 18,446,744,073,709,551,616, (1 in 18 quintillion) one of the following has | |
289 | * most likely happened: | |
290 | * | |
291 | * 1: There is a significant bug in this code. | |
292 | * 2: There has been a massive system failure. | |
293 | * 3: The universe has ceased to exist. | |
294 | * | |
295 | * There is no good way to recover from any of these cases. We | |
296 | * therefore panic. | |
297 | */ | |
298 | ||
299 | panic("FIPS random self-test failed."); | |
300 | } | |
301 | ||
302 | /* | |
303 | *Initialize ONLY the Yarrow generator. | |
304 | */ | |
305 | void | |
306 | PreliminarySetup(void) | |
307 | { | |
308 | prng_error_status perr; | |
309 | ||
310 | /* create a Yarrow object */ | |
311 | perr = prngInitialize(&gPrngRef); | |
312 | if (perr != 0) { | |
313 | printf ("Couldn't initialize Yarrow, /dev/random will not work.\n"); | |
314 | return; | |
315 | } | |
316 | ||
317 | /* clear the error flag, reads and write should then work */ | |
318 | gRandomError = 0; | |
319 | ||
320 | struct timeval tt; | |
321 | char buffer [16]; | |
322 | ||
323 | /* get a little non-deterministic data as an initial seed. */ | |
324 | microtime(&tt); | |
325 | ||
326 | /* | |
327 | * So how much of the system clock is entropic? | |
328 | * It's hard to say, but assume that at least the | |
329 | * least significant byte of a 64 bit structure | |
330 | * is entropic. It's probably more, how can you figure | |
331 | * the exact time the user turned the computer on, for example. | |
332 | */ | |
333 | perr = prngInput(gPrngRef, (BYTE*) &tt, sizeof (tt), SYSTEM_SOURCE, 8); | |
334 | if (perr != 0) { | |
335 | /* an error, complain */ | |
336 | printf ("Couldn't seed Yarrow.\n"); | |
337 | return; | |
338 | } | |
339 | ||
340 | /* turn the data around */ | |
341 | perr = prngOutput(gPrngRef, (BYTE*) buffer, sizeof (buffer)); | |
342 | ||
343 | /* and scramble it some more */ | |
344 | perr = prngForceReseed(gPrngRef, RESEED_TICKS); | |
345 | ||
346 | /* make a mutex to control access */ | |
347 | gYarrowGrpAttr = lck_grp_attr_alloc_init(); | |
348 | gYarrowGrp = lck_grp_alloc_init("random", gYarrowGrpAttr); | |
349 | gYarrowAttr = lck_attr_alloc_init(); | |
350 | gYarrowMutex = lck_mtx_alloc_init(gYarrowGrp, gYarrowAttr); | |
351 | ||
352 | fips_initialize (); | |
353 | } | |
354 | ||
355 | const Block kKnownAnswer = {0x92, 0xb4, 0x04, 0xe5, 0x56, 0x58, 0x8c, 0xed, 0x6c, 0x1a, 0xcd, 0x4e, 0xbf, 0x05, 0x3f, 0x68, 0x09, 0xf7, 0x3a, 0x93}; | |
356 | ||
357 | void | |
358 | fips_initialize(void) | |
359 | { | |
360 | /* So that we can do the self test, set the seed to zero */ | |
361 | memset(&g_xkey, 0, sizeof(g_xkey)); | |
362 | ||
363 | /* other initializations */ | |
364 | memset (zeros, 0, sizeof (zeros)); | |
365 | g_bytes_used = 0; | |
366 | random_block(g_random_data, FALSE); | |
367 | ||
368 | // check here to see if we got the initial data we were expecting | |
369 | if (memcmp(kKnownAnswer, g_random_data, kBlockSize) != 0) | |
370 | { | |
371 | panic("FIPS random self test failed"); | |
372 | } | |
373 | ||
374 | // now do the random block again to make sure that userland doesn't get predicatable data | |
375 | random_block(g_random_data, TRUE); | |
376 | } | |
377 | ||
378 | /* | |
379 | * Called to initialize our device, | |
380 | * and to register ourselves with devfs | |
381 | */ | |
382 | void | |
383 | random_init(void) | |
384 | { | |
385 | int ret; | |
386 | ||
387 | if (gRandomInstalled) | |
388 | return; | |
389 | ||
390 | /* install us in the file system */ | |
391 | gRandomInstalled = 1; | |
392 | ||
393 | /* setup yarrow and the mutex */ | |
394 | PreliminarySetup(); | |
395 | ||
396 | ret = cdevsw_add(RANDOM_MAJOR, &random_cdevsw); | |
397 | if (ret < 0) { | |
398 | printf("random_init: failed to allocate a major number!\n"); | |
399 | gRandomInstalled = 0; | |
400 | return; | |
401 | } | |
402 | ||
403 | devfs_make_node(makedev (ret, 0), DEVFS_CHAR, | |
404 | UID_ROOT, GID_WHEEL, 0666, "random", 0); | |
405 | ||
406 | /* | |
407 | * also make urandom | |
408 | * (which is exactly the same thing in our context) | |
409 | */ | |
410 | devfs_make_node(makedev (ret, 1), DEVFS_CHAR, | |
411 | UID_ROOT, GID_WHEEL, 0666, "urandom", 0); | |
412 | } | |
413 | ||
414 | int | |
415 | random_ioctl( __unused dev_t dev, u_long cmd, __unused caddr_t data, | |
416 | __unused int flag, __unused struct proc *p ) | |
417 | { | |
418 | switch (cmd) { | |
419 | case FIONBIO: | |
420 | case FIOASYNC: | |
421 | break; | |
422 | default: | |
423 | return ENODEV; | |
424 | } | |
425 | ||
426 | return (0); | |
427 | } | |
428 | ||
429 | /* | |
430 | * Open the device. Make sure init happened, and make sure the caller is | |
431 | * authorized. | |
432 | */ | |
433 | ||
434 | int | |
435 | random_open(__unused dev_t dev, int flags, __unused int devtype, __unused struct proc *p) | |
436 | { | |
437 | if (gRandomError != 0) { | |
438 | /* forget it, yarrow didn't come up */ | |
439 | return (ENOTSUP); | |
440 | } | |
441 | ||
442 | /* | |
443 | * if we are being opened for write, | |
444 | * make sure that we have privledges do so | |
445 | */ | |
446 | if (flags & FWRITE) { | |
447 | if (securelevel >= 2) | |
448 | return (EPERM); | |
449 | #ifndef __APPLE__ | |
450 | if ((securelevel >= 1) && proc_suser(p)) | |
451 | return (EPERM); | |
452 | #endif /* !__APPLE__ */ | |
453 | } | |
454 | ||
455 | return (0); | |
456 | } | |
457 | ||
458 | ||
459 | /* | |
460 | * close the device. | |
461 | */ | |
462 | ||
463 | int | |
464 | random_close(__unused dev_t dev, __unused int flags, __unused int mode, __unused struct proc *p) | |
465 | { | |
466 | return (0); | |
467 | } | |
468 | ||
469 | ||
470 | /* | |
471 | * Get entropic data from the Security Server, and use it to reseed the | |
472 | * prng. | |
473 | */ | |
474 | int | |
475 | random_write (__unused dev_t dev, struct uio *uio, __unused int ioflag) | |
476 | { | |
477 | int retCode = 0; | |
478 | char rdBuffer[256]; | |
479 | ||
480 | if (gRandomError != 0) { | |
481 | return (ENOTSUP); | |
482 | } | |
483 | ||
484 | /* get control of the Yarrow instance, Yarrow is NOT thread safe */ | |
485 | lck_mtx_lock(gYarrowMutex); | |
486 | ||
487 | /* Security server is sending us entropy */ | |
488 | ||
489 | while (uio_resid(uio) > 0 && retCode == 0) { | |
490 | /* get the user's data */ | |
491 | int bytesToInput = min(uio_resid(uio), sizeof (rdBuffer)); | |
492 | retCode = uiomove(rdBuffer, bytesToInput, uio); | |
493 | if (retCode != 0) | |
494 | goto /*ugh*/ error_exit; | |
495 | ||
496 | /* put it in Yarrow */ | |
497 | if (prngInput(gPrngRef, (BYTE*) rdBuffer, | |
498 | bytesToInput, SYSTEM_SOURCE, | |
499 | bytesToInput * 8) != 0) { | |
500 | retCode = EIO; | |
501 | goto error_exit; | |
502 | } | |
503 | } | |
504 | ||
505 | /* force a reseed */ | |
506 | if (prngForceReseed(gPrngRef, RESEED_TICKS) != 0) { | |
507 | retCode = EIO; | |
508 | goto error_exit; | |
509 | } | |
510 | ||
511 | /* retCode should be 0 at this point */ | |
512 | ||
513 | error_exit: /* do this to make sure the mutex unlocks. */ | |
514 | lck_mtx_unlock(gYarrowMutex); | |
515 | return (retCode); | |
516 | } | |
517 | ||
518 | /* | |
519 | * return data to the caller. Results unpredictable. | |
520 | */ | |
521 | int | |
522 | random_read(__unused dev_t dev, struct uio *uio, __unused int ioflag) | |
523 | { | |
524 | int retCode = 0; | |
525 | ||
526 | if (gRandomError != 0) | |
527 | return (ENOTSUP); | |
528 | ||
529 | /* lock down the mutex */ | |
530 | lck_mtx_lock(gYarrowMutex); | |
531 | ||
532 | ||
533 | int bytes_remaining = uio_resid(uio); | |
534 | while (bytes_remaining > 0 && retCode == 0) { | |
535 | /* get the user's data */ | |
536 | int bytes_to_read = 0; | |
537 | ||
538 | int bytes_available = kBlockSize - g_bytes_used; | |
539 | if (bytes_available == 0) | |
540 | { | |
541 | random_block(g_random_data, TRUE); | |
542 | g_bytes_used = 0; | |
543 | bytes_available = kBlockSize; | |
544 | } | |
545 | ||
546 | bytes_to_read = min (bytes_remaining, bytes_available); | |
547 | ||
548 | retCode = uiomove(((caddr_t)g_random_data)+ g_bytes_used, bytes_to_read, uio); | |
549 | g_bytes_used += bytes_to_read; | |
550 | ||
551 | if (retCode != 0) | |
552 | goto error_exit; | |
553 | ||
554 | bytes_remaining = uio_resid(uio); | |
555 | } | |
556 | ||
557 | retCode = 0; | |
558 | ||
559 | error_exit: | |
560 | lck_mtx_unlock(gYarrowMutex); | |
561 | return retCode; | |
562 | } | |
563 | ||
564 | /* export good random numbers to the rest of the kernel */ | |
565 | void | |
566 | read_random(void* buffer, u_int numbytes) | |
567 | { | |
568 | if (gYarrowMutex == 0) { /* are we initialized? */ | |
569 | PreliminarySetup (); | |
570 | } | |
571 | ||
572 | lck_mtx_lock(gYarrowMutex); | |
573 | int bytes_read = 0; | |
574 | ||
575 | int bytes_remaining = numbytes; | |
576 | while (bytes_remaining > 0) { | |
577 | int bytes_to_read = min(bytes_remaining, kBlockSize - g_bytes_used); | |
578 | if (bytes_to_read == 0) | |
579 | { | |
580 | random_block(g_random_data, TRUE); | |
581 | g_bytes_used = 0; | |
582 | bytes_to_read = min(bytes_remaining, kBlockSize); | |
583 | } | |
584 | ||
585 | memmove ((u_int8_t*) buffer + bytes_read, ((u_int8_t*)g_random_data)+ g_bytes_used, bytes_to_read); | |
586 | g_bytes_used += bytes_to_read; | |
587 | bytes_read += bytes_to_read; | |
588 | bytes_remaining -= bytes_to_read; | |
589 | } | |
590 | ||
591 | lck_mtx_unlock(gYarrowMutex); | |
592 | } | |
593 | ||
594 | /* | |
595 | * Return an u_int32_t pseudo-random number. | |
596 | */ | |
597 | u_int32_t | |
598 | RandomULong(void) | |
599 | { | |
600 | u_int32_t buf; | |
601 | read_random(&buf, sizeof (buf)); | |
602 | return (buf); | |
603 | } | |
604 |