]> git.saurik.com Git - apple/xnu.git/blame_incremental - bsd/net/ethernet.h
xnu-4903.270.47.tar.gz
[apple/xnu.git] / bsd / net / ethernet.h
... / ...
CommitLineData
1/*
2 * Copyright (c) 2000-2010 Apple Inc. All rights reserved.
3 *
4 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
5 *
6 * This file contains Original Code and/or Modifications of Original Code
7 * as defined in and that are subject to the Apple Public Source License
8 * Version 2.0 (the 'License'). You may not use this file except in
9 * compliance with the License. The rights granted to you under the License
10 * may not be used to create, or enable the creation or redistribution of,
11 * unlawful or unlicensed copies of an Apple operating system, or to
12 * circumvent, violate, or enable the circumvention or violation of, any
13 * terms of an Apple operating system software license agreement.
14 *
15 * Please obtain a copy of the License at
16 * http://www.opensource.apple.com/apsl/ and read it before using this file.
17 *
18 * The Original Code and all software distributed under the License are
19 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
20 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
21 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
23 * Please see the License for the specific language governing rights and
24 * limitations under the License.
25 *
26 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
27 */
28/*
29 * Fundamental constants relating to ethernet.
30 *
31 */
32
33#ifndef _NET_ETHERNET_H_
34#define _NET_ETHERNET_H_
35#include <sys/appleapiopts.h>
36#include <sys/types.h> /* u_ types */
37
38/*
39 * The number of bytes in an ethernet (MAC) address.
40 */
41#define ETHER_ADDR_LEN 6
42
43/*
44 * The number of bytes in the type field.
45 */
46#define ETHER_TYPE_LEN 2
47
48/*
49 * The number of bytes in the trailing CRC field.
50 */
51#define ETHER_CRC_LEN 4
52
53/*
54 * The length of the combined header.
55 */
56#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
57
58/*
59 * The minimum packet length.
60 */
61#define ETHER_MIN_LEN 64
62
63/*
64 * The maximum packet length.
65 */
66#define ETHER_MAX_LEN 1518
67
68/*
69 * Mbuf adjust factor to force 32-bit alignment of IP header.
70 * Drivers should do m_adj(m, ETHER_ALIGN) when setting up a
71 * receive so the upper layers get the IP header properly aligned
72 * past the 14-byte Ethernet header.
73 */
74#define ETHER_ALIGN 2 /* driver adjust for IP hdr alignment */
75
76/*
77 * A macro to validate a length with
78 */
79#define ETHER_IS_VALID_LEN(foo) \
80 ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
81
82/*
83 * Structure of a 10Mb/s Ethernet header.
84 */
85typedef struct ether_header {
86 u_char ether_dhost[ETHER_ADDR_LEN];
87 u_char ether_shost[ETHER_ADDR_LEN];
88 u_short ether_type;
89} ether_header_t;
90
91/*
92 * Structure of a 48-bit Ethernet address.
93 */
94typedef struct ether_addr {
95 u_char octet[ETHER_ADDR_LEN];
96} ether_addr_t;
97
98#define ether_addr_octet octet
99
100#define ETHERTYPE_PUP 0x0200 /* PUP protocol */
101#define ETHERTYPE_IP 0x0800 /* IP protocol */
102#define ETHERTYPE_ARP 0x0806 /* Addr. resolution protocol */
103#define ETHERTYPE_REVARP 0x8035 /* reverse Addr. resolution protocol */
104#define ETHERTYPE_VLAN 0x8100 /* IEEE 802.1Q VLAN tagging */
105#define ETHERTYPE_IPV6 0x86dd /* IPv6 */
106#define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
107#define ETHERTYPE_RSN_PREAUTH 0x88c7 /* 802.11i / RSN Pre-Authentication */
108#define ETHERTYPE_PTP 0x88f7 /* IEEE 1588 Precision Time Protocol */
109#define ETHERTYPE_LOOPBACK 0x9000 /* used to test interfaces */
110/* XXX - add more useful types here */
111
112/*
113 * The ETHERTYPE_NTRAILER packet types starting at ETHERTYPE_TRAIL have
114 * (type-ETHERTYPE_TRAIL)*512 bytes of data followed
115 * by an ETHER type (as given above) and then the (variable-length) header.
116 */
117#define ETHERTYPE_TRAIL 0x1000 /* Trailer packet */
118#define ETHERTYPE_NTRAILER 16
119
120#define ETHERMTU (ETHER_MAX_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
121#define ETHERMIN (ETHER_MIN_LEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
122
123#ifdef KERNEL_PRIVATE
124/*
125 * The following are used by ethernet interfaces.
126 */
127
128struct ether_addr *ether_aton(const char *);
129
130#ifdef BSD_KERNEL_PRIVATE
131extern u_char etherbroadcastaddr[ETHER_ADDR_LEN];
132
133#if defined (__arm__)
134
135#include <string.h>
136
137static __inline__ int
138_ether_cmp(const void * a, const void * b)
139{
140 return memcmp(a, b, ETHER_ADDR_LEN);
141}
142
143#else /* __arm__ */
144
145static __inline__ int
146_ether_cmp(const void * a, const void * b)
147{
148 const u_int16_t * a_s = (const u_int16_t *)a;
149 const u_int16_t * b_s = (const u_int16_t *)b;
150
151 if (a_s[0] != b_s[0]
152 || a_s[1] != b_s[1]
153 || a_s[2] != b_s[2]) {
154 return 1;
155 }
156 return 0;
157}
158
159#endif /* __arm__ */
160#endif /* BSD_KERNEL_PRIVATE */
161
162#define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */
163
164#endif /* KERNEL_PRIVATE */
165
166#ifndef KERNEL
167#include <sys/cdefs.h>
168
169/*
170 * Ethernet address conversion/parsing routines.
171 */
172__BEGIN_DECLS
173
174int ether_hostton(const char *, struct ether_addr *);
175int ether_line(const char *, struct ether_addr *, char *);
176char *ether_ntoa(const struct ether_addr *);
177struct ether_addr *ether_aton(const char *);
178int ether_ntohost(char *, const struct ether_addr *);
179__END_DECLS
180#endif /* !KERNEL */
181
182#endif /* !_NET_ETHERNET_H_ */