[apple/xnu.git] / tools / tests / libMicro / benchDS.sh

#!/bin/sh
#
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms
# of the Common Development and Distribution License
# (the "License").  You may not use this file except
# in compliance with the License.
#
# You can obtain a copy of the license at
# src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing
# permissions and limitations under the License.
#
# When distributing Covered Code, include this CDDL
# HEADER in each file and include the License file at
# usr/src/OPENSOLARIS.LICENSE.  If applicable,
# add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your
# own identifying information: Portions Copyright [yyyy]
# [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#

function usage {
    echo "Usage"
    echo "$0 [-l] [-h] <#-of-users> nodename [test match pattern]"
    echo "-l                    : disable libinfo L1 cache"
    echo "-h                    : Help. This option displays information on how to run the script. "
    echo "[test match pattern]  : This option runs only the test that is specified"
    echo                                                                                                                                                                                                       
    echo "You must have set up users, groups, and SACLs with od_account_create"
    echo "with the same number of user accounts."                                                                                                                                                               
    echo "Supply a pattern to match to run a subset of tests"
    exit 1
}

# default to libinfo cache enabled
L1CACHE="1"

while getopts "lh" OPT_LIST
do
    case $OPT_LIST in 
        l) L1CACHE="0";;    # to run the libmicro tests with l1cache disabled
        h) usage;;
        *) usage;;
    esac
done

shift `expr $OPTIND - 1`

if [ $# -lt 2 -o $# -gt 3 ]; then
    usage
fi

tattle="./tattle"

bench_version=0.4.0
libmicro_version=`$tattle -V`

case $libmicro_version in
$bench_version)
	;;
*)
	echo "ERROR: libMicro version doesn't match 'bench' script version"
	exit 1
esac

TMPROOT=/private/tmp/libmicro.$$
VARROOT=/private/var/tmp/libmicro.$$
mkdir -p $TMPROOT
mkdir -p $VARROOT
trap "rm -rf $TMPROOT $VARROOT && exit" 0 2

TFILE=$TMPROOT/data
IFILE=$TMPROOT/ifile
TDIR1=$TMPROOT/0/1/2/3/4/5/6/7/8/9
TDIR2=$TMPROOT/1/2/3/4/5/6/7/8/9/0
VFILE=$VARROOT/data
VDIR1=$VARROOT/0/1/2/3/4/5/6/7/8/9
VDIR2=$VARROOT/1/2/3/4/5/6/7/8/9/0

OPTS="-E -C 200 -L -S -W"

dd if=/dev/zero of=$TFILE bs=1024k count=10 2>/dev/null
dd if=/dev/zero of=$VFILE bs=1024k count=10 2>/dev/null
mkdir -p $TDIR1 $TDIR2
mkdir -p $VDIR1 $VDIR2

touch $IFILE
/usr/bin/touch /private/var/tmp/lmbench


# produce benchmark header for easier comparisons

hostname=`uname -n`

if [ -f /usr/sbin/psrinfo ]; then
	p_count=`psrinfo|wc -l`
	p_mhz=`psrinfo -v | awk '/operates/{print $6 "MHz"; exit }'`
	p_type=`psrinfo -vp 2>/dev/null | awk '{if (NR == 3) {print $0; exit}}'` 
	p_ipaddr=`getent hosts $hostname | awk '{print $1}'`
fi

if [ -f /proc/cpuinfo ]; then
	p_count=`egrep processor /proc/cpuinfo | wc -l`
	p_mhz=`awk -F: '/cpu MHz/{printf("%5.0f00Mhz\n",$2/100); exit}' /proc/cpuinfo`
	p_type=`awk -F: '/model name/{print $2; exit}' /proc/cpuinfo`
	p_ipaddr=`getent hosts $hostname | awk '{print $1}'`
else
## Mac OS X specific stuff
# first, get ugly output, in case pretty output isn't available
#
	p_count=`sysctl -n hw.physicalcpu`
	p_mhz=`sysctl -n hw.cpufrequency`
	p_type=`sysctl -n hw.model`

if [ -x /usr/sbin/system_profiler ]; then
	# <rdar://4655981> requires this hunk of work-around
	# grep the XML for the characteristic we need. The key appears twice, so grep for the useful key (with 'string')
	# use sed to strip off the <string></string> and the tabs in front of the string.  So much work for so little result.
	#
		p_mhz=`system_profiler -xml -detailLevel mini SPHardwareDataType | \
			grep -A1 current_processor_speed | grep string | \
			sed -E 's/<string>(.+)<\/string>/\1/' | sed 's-	--g'`
		p_type=`system_profiler -xml -detailLevel mini SPHardwareDataType | \
			grep -A1 cpu_type | grep string | \
			sed -E 's/<string>(.+)<\/string>/\1/' | sed 's-	--g'`
fi

# look for en0 (usually ethernet) if that isn't there try en1 (usually wireless) else give up
	p_ipaddr=`ipconfig getpacket en0 | grep yiaddr | tr "= " "\n" | grep [0-9]`
	if [ ! $p_ipaddr  ]; then
		p_ipaddr=`ipconfig getpacket en1 | grep yiaddr | tr "= " "\n" | grep [0-9]`
	elif [ ! $p_ipaddr ]; then
		p_ipaddr="unknown"
	fi
fi

printf "\n\n!Libmicro_#:   %30s\n" $libmicro_version
printf "!Options:      %30s\n" "$OPTS"
printf "!Machine_name: %30s\n" "$hostname"
printf "!OS_name:      %30s\n" `uname -s`
printf "!OS_release:   %30s\n" `sw_vers -productVersion`
printf "!OS_build:     %30.18s\n" "`sw_vers -buildVersion`"
printf "!Processor:    %30s\n" `arch`
printf "!#CPUs:        %30s\n" $p_count
printf "!CPU_MHz:      %30s\n" "$p_mhz"
printf "!CPU_NAME:     %30s\n" "$p_type"
printf "!IP_address:   %30s\n" "$p_ipaddr"
printf "!Run_by:       %30s\n" $LOGNAME
printf "!Date:	       %30s\n" "`date '+%D %R'`"
printf "!Compiler:     %30s\n" `$tattle -c`
printf "!Compiler Ver.:%30s\n" "`$tattle -v`"
printf "!sizeof(long): %30s\n" `$tattle -s`
printf "!extra_CFLAGS: %30s\n" "`$tattle -f`"
printf "!TimerRes:     %30s\n\n\n" "`$tattle -r`"
 
bin_dir="$TMPROOT/bin"

mkdir -p $bin_dir
cp bin-*/exec_bin $bin_dir/$A

cp ./apple/bin-*/posix_spawn_bin $bin_dir/$A

newline=0

# We commonly want to adjust this script for the number of users
# and configuration of the accounts and configuration being tested.
#
# Users:
NUSERS=$1
NODENAME=$2
UID_BASE=5000
UID_END=`expr $UID_BASE + $NUSERS - 1`
USER_PREFIX=od_test_
#
# Groups:
GID_ALL_USERS=1211
GID_NO_USERS=1212
GROUP_BASE=od_test_group
#
# getaddrinfo on hosts:
HOST_BASE=sfs0
HOST_RANGE=1-8

#
# Everything below the while loop is input for the while loop if
# you have any tests which can't run in the while loop, put
# them above this comment
#
while read A B
do
	# $A contains the command, $B contains the arguments
	# we echo blank lines and comments
	# we skip anything which fails to match *$1* (useful if
	# we only want to test one case, but a nasty hack)

	case $A in
	\#*)
		echo "$A $B"
		newline=1
		continue
		;;
	
	"")
		if [ $newline -eq 1 ]
		then
			newline=0
			echo
			echo
		fi

		continue
		;;

	*$3*)
		;;

	*)
		continue
		;;
	esac

	if [ ! -f $bin_dir/$A ]
	then
		cp bin-*/$A $bin_dir/$A
	fi

	echo

	(cd $TMPROOT && eval "bin/$A $B")

	echo
	echo
done <<.

# -P <# procs>
# -T <# threads> - exclusive!

# mbr_check_service_membership()
mbr_check_service_membership	$OPTS -N "mbr_check_service_membership" -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
mbr_check_service_membership	$OPTS -N "mbr_check_service_membership_t2" -T 2 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
mbr_check_service_membership	$OPTS -N "mbr_check_service_membership_t4" -T 4 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
mbr_check_service_membership	$OPTS -N "mbr_check_service_membership_p2" -P 2 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
mbr_check_service_membership	$OPTS -N "mbr_check_service_membership_p4" -P 4 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}

# getpwnam()
getpwnam			$OPTS -N "getpwnam" -l ${L1CACHE} -r ${NUSERS} -u ${USER_PREFIX}
getpwnam			$OPTS -N "getpwnam_t2" -T 2 -l ${L1CACHE} -r ${NUSERS} -u ${USER_PREFIX}
getpwnam			$OPTS -N "getpwnam_p2" -P 2 -l ${L1CACHE} -r ${NUSERS} -u ${USER_PREFIX}

# mbr_check_membership()
mbr_check_membership		$OPTS -N "mbr_check_membership" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS}
mbr_check_membership		$OPTS -N "mbr_check_membership_t2" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 2
mbr_check_membership		$OPTS -N "mbr_check_membership_t4" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 4
mbr_check_membership		$OPTS -N "mbr_check_membership_p2" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 2
mbr_check_membership		$OPTS -N "mbr_check_membership_p4" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 4

# getpwuid()
getpwuid			$OPTS -N "getpwuid" -l ${L1CACHE} -u ${UID_BASE}-${UID_END}
getpwuid			$OPTS -N "getpwuid_t2" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -T 2
getpwuid			$OPTS -N "getpwuid_t4" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -T 4
getpwuid			$OPTS -N "getpwuid_p2" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -P 2
getpwuid			$OPTS -N "getpwuid_p4" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -P 4

# getgrgid()
getgrgid			$OPTS -N "getgrgid" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS}
getgrgid			$OPTS -N "getgrgid_t2" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 2
getgrgid			$OPTS -N "getgrgid_t4" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 4
getgrgid			$OPTS -N "getgrgid_p2" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 2
getgrgid			$OPTS -N "getgrgid_p4" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 4

# getpwent()
getpwent			$OPTS -N "getpwent" -l ${L1CACHE} 
getpwent			$OPTS -N "getpwent_t2" -l ${L1CACHE} -T 2
getpwent			$OPTS -N "getpwent_t4" -l ${L1CACHE} -T 4
getpwent			$OPTS -N "getpwent_p2" -l ${L1CACHE} -P 2
getpwent			$OPTS -N "getpwent_p4" -l ${L1CACHE} -P 4

# getgrent()
getgrent			$OPTS -N "getgrent" -l ${L1CACHE} 
getgrent			$OPTS -N "getgrent_t2" -l ${L1CACHE} -T 2
getgrent			$OPTS -N "getgrent_t4" -l ${L1CACHE} -T 4
getgrent			$OPTS -N "getgrent_p2" -l ${L1CACHE} -P 2
getgrent			$OPTS -N "getgrent_p4" -l ${L1CACHE} -P 4

# getaddrinfo() host
#getaddrinfo_host		$OPTS -N "getaddrinfo_host" -r ${HOST_RANGE} -h ${HOST_BASE}%d
#getaddrinfo_host		$OPTS -N "getaddrinfo_host_t2" -r ${HOST_RANGE} -h ${HOST_BASE}%d -T 2
#getaddrinfo_host		$OPTS -N "getaddrinfo_host_t4" -r ${HOST_RANGE} -h ${HOST_BASE}%d -T 4
#getaddrinfo_host		$OPTS -N "getaddrinfo_host_p2" -r ${HOST_RANGE} -h ${HOST_BASE}%d -P 2
#getaddrinfo_host		$OPTS -N "getaddrinfo_host_p4" -r ${HOST_RANGE} -h ${HOST_BASE}%d -P 4

# getaddrinfo() port
getaddrinfo_port		$OPTS -N "getaddrinfo_port" -l ${L1CACHE} 
getaddrinfo_port		$OPTS -N "getaddrinfo_port_t2" -l ${L1CACHE} -T 2
getaddrinfo_port		$OPTS -N "getaddrinfo_port_t4" -l ${L1CACHE} -T 4
getaddrinfo_port		$OPTS -N "getaddrinfo_port_p2" -l ${L1CACHE} -P 2
getaddrinfo_port		$OPTS -N "getaddrinfo_port_p4" -l ${L1CACHE} -P 4

# getgrnam()
getgrnam			$OPTS -N "getgrnam" -l ${L1CACHE} -g ${GROUP_BASE} -r 2
getgrnam			$OPTS -N "getgrnam_t2" -l ${L1CACHE} -T 2 -g ${GROUP_BASE} -r 2
getgrnam			$OPTS -N "getgrnam_t4" -l ${L1CACHE} -T 4 -g ${GROUP_BASE} -r 2
getgrnam			$OPTS -N "getgrnam_p2" -l ${L1CACHE} -P 2 -g ${GROUP_BASE} -r 2
getgrnam			$OPTS -N "getgrnam_p4" -l ${L1CACHE} -P 4 -g ${GROUP_BASE} -r 2

# ODQueryCreateWithNode()
od_query_create_with_node	$OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u" -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
od_query_create_with_node	$OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_t2" -T 2 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
od_query_create_with_node	$OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_t4" -T 4 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
od_query_create_with_node	$OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_p2" -P 2 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
od_query_create_with_node	$OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_p4" -P 4 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}

.
Commit	Line	Data
6d2010ae A	1	#!/bin/sh
	2	#
	3	#
	4	# CDDL HEADER START
	5	#
	6	# The contents of this file are subject to the terms
	7	# of the Common Development and Distribution License
	8	# (the "License"). You may not use this file except
	9	# in compliance with the License.
	10	#
	11	# You can obtain a copy of the license at
	12	# src/OPENSOLARIS.LICENSE
	13	# or http://www.opensolaris.org/os/licensing.
	14	# See the License for the specific language governing
	15	# permissions and limitations under the License.
	16	#
	17	# When distributing Covered Code, include this CDDL
	18	# HEADER in each file and include the License file at
	19	# usr/src/OPENSOLARIS.LICENSE. If applicable,
	20	# add the following below this CDDL HEADER, with the
	21	# fields enclosed by brackets "[]" replaced with your
	22	# own identifying information: Portions Copyright [yyyy]
	23	# [name of copyright owner]
	24	#
	25	# CDDL HEADER END
	26	#
	27
	28	#
	29	# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
	30	# Use is subject to license terms.
	31	#
	32
	33	function usage {
	34	echo "Usage"
	35	echo "$0 [-l] [-h] <#-of-users> nodename [test match pattern]"
	36	echo "-l : disable libinfo L1 cache"
	37	echo "-h : Help. This option displays information on how to run the script. "
	38	echo "[test match pattern] : This option runs only the test that is specified"
	39	echo
	40	echo "You must have set up users, groups, and SACLs with od_account_create"
	41	echo "with the same number of user accounts."
	42	echo "Supply a pattern to match to run a subset of tests"
	43	exit 1
	44	}
	45
	46	# default to libinfo cache enabled
	47	L1CACHE="1"
	48
	49	while getopts "lh" OPT_LIST
	50	do
	51	case $OPT_LIST in
	52	l) L1CACHE="0";; # to run the libmicro tests with l1cache disabled
	53	h) usage;;
	54	*) usage;;
	55	esac
	56	done
	57
	58	shift `expr $OPTIND - 1`
	59
	60	if [ $# -lt 2 -o $# -gt 3 ]; then
	61	usage
	62	fi
	63
	64	tattle="./tattle"
65
66	bench_version=0.4.0
67	libmicro_version=`$tattle -V`
68
69	case $libmicro_version in
70	$bench_version)
71	;;
72	*)
73	echo "ERROR: libMicro version doesn't match 'bench' script version"
74	exit 1
75	esac
76
77	TMPROOT=/private/tmp/libmicro.$$
78	VARROOT=/private/var/tmp/libmicro.$$
79	mkdir -p $TMPROOT
80	mkdir -p $VARROOT
81	trap "rm -rf $TMPROOT $VARROOT && exit" 0 2
82
83	TFILE=$TMPROOT/data
84	IFILE=$TMPROOT/ifile
85	TDIR1=$TMPROOT/0/1/2/3/4/5/6/7/8/9
86	TDIR2=$TMPROOT/1/2/3/4/5/6/7/8/9/0
87	VFILE=$VARROOT/data
88	VDIR1=$VARROOT/0/1/2/3/4/5/6/7/8/9
89	VDIR2=$VARROOT/1/2/3/4/5/6/7/8/9/0
90
91	OPTS="-E -C 200 -L -S -W"
92
93	dd if=/dev/zero of=$TFILE bs=1024k count=10 2>/dev/null
94	dd if=/dev/zero of=$VFILE bs=1024k count=10 2>/dev/null
95	mkdir -p $TDIR1 $TDIR2
96	mkdir -p $VDIR1 $VDIR2
97
98	touch $IFILE
99	/usr/bin/touch /private/var/tmp/lmbench
100
101
102	# produce benchmark header for easier comparisons
103
104	hostname=`uname -n`
105
106	if [ -f /usr/sbin/psrinfo ]; then
107	p_count=`psrinfo\|wc -l`
108	p_mhz=`psrinfo -v \| awk '/operates/{print $6 "MHz"; exit }'`
109	p_type=`psrinfo -vp 2>/dev/null \| awk '{if (NR == 3) {print $0; exit}}'`
110	p_ipaddr=`getent hosts $hostname \| awk '{print $1}'`
111	fi
112
113	if [ -f /proc/cpuinfo ]; then
114	p_count=`egrep processor /proc/cpuinfo \| wc -l`
115	p_mhz=`awk -F: '/cpu MHz/{printf("%5.0f00Mhz\n",$2/100); exit}' /proc/cpuinfo`
116	p_type=`awk -F: '/model name/{print $2; exit}' /proc/cpuinfo`
117	p_ipaddr=`getent hosts $hostname \| awk '{print $1}'`
118	else
119	## Mac OS X specific stuff
120	# first, get ugly output, in case pretty output isn't available
121	#
122	p_count=`sysctl -n hw.physicalcpu`
123	p_mhz=`sysctl -n hw.cpufrequency`
124	p_type=`sysctl -n hw.model`
125
126	if [ -x /usr/sbin/system_profiler ]; then
127	# <rdar://4655981> requires this hunk of work-around
128	# grep the XML for the characteristic we need. The key appears twice, so grep for the useful key (with 'string')
129	# use sed to strip off the <string></string> and the tabs in front of the string. So much work for so little result.
130	#
131	p_mhz=`system_profiler -xml -detailLevel mini SPHardwareDataType \| \
132	grep -A1 current_processor_speed \| grep string \| \
133	sed -E 's/<string>(.+)<\/string>/\1/' \| sed 's- --g'`
134	p_type=`system_profiler -xml -detailLevel mini SPHardwareDataType \| \
135	grep -A1 cpu_type \| grep string \| \
136	sed -E 's/<string>(.+)<\/string>/\1/' \| sed 's- --g'`
137	fi
138
139	# look for en0 (usually ethernet) if that isn't there try en1 (usually wireless) else give up
140	p_ipaddr=`ipconfig getpacket en0 \| grep yiaddr \| tr "= " "\n" \| grep [0-9]`
141	if [ ! $p_ipaddr ]; then
142	p_ipaddr=`ipconfig getpacket en1 \| grep yiaddr \| tr "= " "\n" \| grep [0-9]`
143	elif [ ! $p_ipaddr ]; then
144	p_ipaddr="unknown"
145	fi
146	fi
147
148	printf "\n\n!Libmicro_#: %30s\n" $libmicro_version
149	printf "!Options: %30s\n" "$OPTS"
150	printf "!Machine_name: %30s\n" "$hostname"
151	printf "!OS_name: %30s\n" `uname -s`
152	printf "!OS_release: %30s\n" `sw_vers -productVersion`
153	printf "!OS_build: %30.18s\n" "`sw_vers -buildVersion`"
154	printf "!Processor: %30s\n" `arch`
155	printf "!#CPUs: %30s\n" $p_count
156	printf "!CPU_MHz: %30s\n" "$p_mhz"
157	printf "!CPU_NAME: %30s\n" "$p_type"
158	printf "!IP_address: %30s\n" "$p_ipaddr"
159	printf "!Run_by: %30s\n" $LOGNAME
160	printf "!Date: %30s\n" "`date '+%D %R'`"
161	printf "!Compiler: %30s\n" `$tattle -c`
162	printf "!Compiler Ver.:%30s\n" "`$tattle -v`"
163	printf "!sizeof(long): %30s\n" `$tattle -s`
164	printf "!extra_CFLAGS: %30s\n" "`$tattle -f`"
165	printf "!TimerRes: %30s\n\n\n" "`$tattle -r`"
166
167	bin_dir="$TMPROOT/bin"
168
169	mkdir -p $bin_dir
170	cp bin-*/exec_bin $bin_dir/$A
171
172	cp ./apple/bin-*/posix_spawn_bin $bin_dir/$A
173
174	newline=0
175
176	# We commonly want to adjust this script for the number of users
177	# and configuration of the accounts and configuration being tested.
178	#
179	# Users:
180	NUSERS=$1
181	NODENAME=$2
182	UID_BASE=5000
183	UID_END=`expr $UID_BASE + $NUSERS - 1`
184	USER_PREFIX=od_test_
185	#
186	# Groups:
187	GID_ALL_USERS=1211
188	GID_NO_USERS=1212
189	GROUP_BASE=od_test_group
190	#
191	# getaddrinfo on hosts:
192	HOST_BASE=sfs0
193	HOST_RANGE=1-8
194
195	#
3e170ce0 A	196	# Everything below the while loop is input for the while loop if
3e170ce0 A	197	# you have any tests which can't run in the while loop, put
6d2010ae A	198	# them above this comment
	199	#
	200	while read A B
	201	do
	202	# $A contains the command, $B contains the arguments
	203	# we echo blank lines and comments
3e170ce0 A	204	# we skip anything which fails to match $1 (useful if
3e170ce0 A	205	# we only want to test one case, but a nasty hack)
6d2010ae A	206
	207	case $A in
	208	\#*)
	209	echo "$A $B"
	210	newline=1
	211	continue
	212	;;
	213
	214	"")
	215	if [ $newline -eq 1 ]
	216	then
	217	newline=0
	218	echo
	219	echo
	220	fi
	221
	222	continue
	223	;;
	224
	225	$3)
	226	;;
	227
	228	*)
	229	continue
	230	;;
	231	esac
	232
	233	if [ ! -f $bin_dir/$A ]
	234	then
	235	cp bin-*/$A $bin_dir/$A
	236	fi
	237
	238	echo
	239
	240	(cd $TMPROOT && eval "bin/$A $B")
	241
	242	echo
	243	echo
	244	done <<.
	245
	246	# -P <# procs>
	247	# -T <# threads> - exclusive!
	248
	249	# mbr_check_service_membership()
	250	mbr_check_service_membership $OPTS -N "mbr_check_service_membership" -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
	251	mbr_check_service_membership $OPTS -N "mbr_check_service_membership_t2" -T 2 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
	252	mbr_check_service_membership $OPTS -N "mbr_check_service_membership_t4" -T 4 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
	253	mbr_check_service_membership $OPTS -N "mbr_check_service_membership_p2" -P 2 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
	254	mbr_check_service_membership $OPTS -N "mbr_check_service_membership_p4" -P 4 -s libMicro -u ${USER_PREFIX} -r ${NUSERS}
	255
	256	# getpwnam()
	257	getpwnam $OPTS -N "getpwnam" -l ${L1CACHE} -r ${NUSERS} -u ${USER_PREFIX}
	258	getpwnam $OPTS -N "getpwnam_t2" -T 2 -l ${L1CACHE} -r ${NUSERS} -u ${USER_PREFIX}
	259	getpwnam $OPTS -N "getpwnam_p2" -P 2 -l ${L1CACHE} -r ${NUSERS} -u ${USER_PREFIX}
	260
	261	# mbr_check_membership()
	262	mbr_check_membership $OPTS -N "mbr_check_membership" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS}
	263	mbr_check_membership $OPTS -N "mbr_check_membership_t2" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 2
	264	mbr_check_membership $OPTS -N "mbr_check_membership_t4" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 4
	265	mbr_check_membership $OPTS -N "mbr_check_membership_p2" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 2
	266	mbr_check_membership $OPTS -N "mbr_check_membership_p4" -u ${UID_BASE}-${UID_END} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 4
	267
	268	# getpwuid()
	269	getpwuid $OPTS -N "getpwuid" -l ${L1CACHE} -u ${UID_BASE}-${UID_END}
270	getpwuid $OPTS -N "getpwuid_t2" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -T 2
271	getpwuid $OPTS -N "getpwuid_t4" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -T 4
272	getpwuid $OPTS -N "getpwuid_p2" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -P 2
273	getpwuid $OPTS -N "getpwuid_p4" -l ${L1CACHE} -u ${UID_BASE}-${UID_END} -P 4
274
275	# getgrgid()
276	getgrgid $OPTS -N "getgrgid" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS}
277	getgrgid $OPTS -N "getgrgid_t2" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 2
278	getgrgid $OPTS -N "getgrgid_t4" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -T 4
279	getgrgid $OPTS -N "getgrgid_p2" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 2
280	getgrgid $OPTS -N "getgrgid_p4" -l ${L1CACHE} -g ${GID_ALL_USERS}-${GID_NO_USERS} -P 4
281
282	# getpwent()
283	getpwent $OPTS -N "getpwent" -l ${L1CACHE}
284	getpwent $OPTS -N "getpwent_t2" -l ${L1CACHE} -T 2
285	getpwent $OPTS -N "getpwent_t4" -l ${L1CACHE} -T 4
286	getpwent $OPTS -N "getpwent_p2" -l ${L1CACHE} -P 2
287	getpwent $OPTS -N "getpwent_p4" -l ${L1CACHE} -P 4
288
289	# getgrent()
290	getgrent $OPTS -N "getgrent" -l ${L1CACHE}
291	getgrent $OPTS -N "getgrent_t2" -l ${L1CACHE} -T 2
292	getgrent $OPTS -N "getgrent_t4" -l ${L1CACHE} -T 4
293	getgrent $OPTS -N "getgrent_p2" -l ${L1CACHE} -P 2
294	getgrent $OPTS -N "getgrent_p4" -l ${L1CACHE} -P 4
295
296	# getaddrinfo() host
297	#getaddrinfo_host $OPTS -N "getaddrinfo_host" -r ${HOST_RANGE} -h ${HOST_BASE}%d
298	#getaddrinfo_host $OPTS -N "getaddrinfo_host_t2" -r ${HOST_RANGE} -h ${HOST_BASE}%d -T 2
299	#getaddrinfo_host $OPTS -N "getaddrinfo_host_t4" -r ${HOST_RANGE} -h ${HOST_BASE}%d -T 4
300	#getaddrinfo_host $OPTS -N "getaddrinfo_host_p2" -r ${HOST_RANGE} -h ${HOST_BASE}%d -P 2
301	#getaddrinfo_host $OPTS -N "getaddrinfo_host_p4" -r ${HOST_RANGE} -h ${HOST_BASE}%d -P 4
302
303	# getaddrinfo() port
304	getaddrinfo_port $OPTS -N "getaddrinfo_port" -l ${L1CACHE}
305	getaddrinfo_port $OPTS -N "getaddrinfo_port_t2" -l ${L1CACHE} -T 2
306	getaddrinfo_port $OPTS -N "getaddrinfo_port_t4" -l ${L1CACHE} -T 4
307	getaddrinfo_port $OPTS -N "getaddrinfo_port_p2" -l ${L1CACHE} -P 2
308	getaddrinfo_port $OPTS -N "getaddrinfo_port_p4" -l ${L1CACHE} -P 4
309
310	# getgrnam()
311	getgrnam $OPTS -N "getgrnam" -l ${L1CACHE} -g ${GROUP_BASE} -r 2
312	getgrnam $OPTS -N "getgrnam_t2" -l ${L1CACHE} -T 2 -g ${GROUP_BASE} -r 2
313	getgrnam $OPTS -N "getgrnam_t4" -l ${L1CACHE} -T 4 -g ${GROUP_BASE} -r 2
314	getgrnam $OPTS -N "getgrnam_p2" -l ${L1CACHE} -P 2 -g ${GROUP_BASE} -r 2
315	getgrnam $OPTS -N "getgrnam_p4" -l ${L1CACHE} -P 4 -g ${GROUP_BASE} -r 2
316
317	# ODQueryCreateWithNode()
318	od_query_create_with_node $OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u" -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
319	od_query_create_with_node $OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_t2" -T 2 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
320	od_query_create_with_node $OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_t4" -T 4 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
321	od_query_create_with_node $OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_p2" -P 2 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
322	od_query_create_with_node $OPTS -N "ODQueryCreateWithNode_cache_${NUSERS}u_p4" -P 4 -c 50 -r ${NUSERS} -t u -B 50 -n ${NODENAME}
323
324	.