]> git.saurik.com Git - apple/security.git/blobdiff - Security/libsecurity_apple_csp/open_ssl/dsa/dsa_gen.c
Security-57031.1.35.tar.gz
[apple/security.git] / Security / libsecurity_apple_csp / open_ssl / dsa / dsa_gen.c
diff --git a/Security/libsecurity_apple_csp/open_ssl/dsa/dsa_gen.c b/Security/libsecurity_apple_csp/open_ssl/dsa/dsa_gen.c
new file mode 100644 (file)
index 0000000..9cda960
--- /dev/null
@@ -0,0 +1,312 @@
+/*
+ * Copyright (c) 2000-2001,2011,2014 Apple Inc. All Rights Reserved.
+ * 
+ * The contents of this file constitute Original Code as defined in and are
+ * subject to the Apple Public Source License Version 1.2 (the 'License').
+ * You may not use this file except in compliance with the License. Please obtain
+ * a copy of the License at http://www.apple.com/publicsource and read it before
+ * using this file.
+ * 
+ * This Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
+ * OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, INCLUDING WITHOUT
+ * LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+ * PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. Please see the License for the
+ * specific language governing rights and limitations under the License.
+ */
+
+
+/* crypto/dsa/dsa_gen.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#undef GENUINE_DSA
+
+#ifdef GENUINE_DSA
+/* Parameter generation follows the original release of FIPS PUB 186,
+ * Appendix 2.2 (i.e. use SHA as defined in FIPS PUB 180) */
+#define HASH    SHA
+#else
+/* Parameter generation follows the updated Appendix 2.2 for FIPS PUB 186,
+ * also Appendix 2.2 of FIPS PUB 186-1 (i.e. use SHA as defined in
+ * FIPS PUB 180-1) */
+#define HASH    SHA1 
+#endif 
+
+#ifndef NO_SHA
+
+#include <stdio.h>
+#include <time.h>
+#include "cryptlib.h"
+#include <openssl/sha.h>
+#include <openssl/bn.h>
+#include <openssl/dsa.h>
+#include <openssl/rand.h>
+
+DSA *DSA_generate_parameters(int bits, unsigned char *seed_in, int seed_len,
+               int *counter_ret, unsigned long *h_ret,
+               void (*callback)(int, int, void *),
+               void *cb_arg)
+       {
+       int ok=0;
+       unsigned char seed[SHA_DIGEST_LENGTH];
+       unsigned char md[SHA_DIGEST_LENGTH];
+       unsigned char buf[SHA_DIGEST_LENGTH],buf2[SHA_DIGEST_LENGTH];
+       BIGNUM *r0,*W,*X,*c,*test;
+       BIGNUM *g=NULL,*q=NULL,*p=NULL;
+       BN_MONT_CTX *mont=NULL;
+       int k,n=0,i,b,m=0;
+       int counter=0;
+       int r=0;
+       BN_CTX *ctx=NULL,*ctx2=NULL,*ctx3=NULL;
+       unsigned int h=2;
+       DSA *ret=NULL;
+
+       if (bits < 512) bits=512;
+       bits=(bits+63)/64*64;
+
+       if (seed_len < 20)
+               seed_in = NULL; /* seed buffer too small -- ignore */
+       if (seed_len > 20) 
+               seed_len = 20; /* App. 2.2 of FIPS PUB 186 allows larger SEED,
+                               * but our internal buffers are restricted to 160 bits*/
+       if ((seed_in != NULL) && (seed_len == 20))
+               memcpy(seed,seed_in,seed_len);
+
+       if ((ctx=BN_CTX_new()) == NULL) goto err;
+       if ((ctx2=BN_CTX_new()) == NULL) goto err;
+       if ((ctx3=BN_CTX_new()) == NULL) goto err;
+       if ((ret=DSA_new()) == NULL) goto err;
+
+       if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
+
+       BN_CTX_start(ctx2);
+       r0 = BN_CTX_get(ctx2);
+       g = BN_CTX_get(ctx2);
+       W = BN_CTX_get(ctx2);
+       q = BN_CTX_get(ctx2);
+       X = BN_CTX_get(ctx2);
+       c = BN_CTX_get(ctx2);
+       p = BN_CTX_get(ctx2);
+       test = BN_CTX_get(ctx2);
+
+       BN_lshift(test,BN_value_one(),bits-1);
+
+       for (;;)
+               {
+               for (;;) /* find q */
+                       {
+                       int seed_is_random;
+
+                       /* step 1 */
+                       if (callback != NULL) callback(0,m++,cb_arg);
+
+                       if (!seed_len)
+                               {
+                               RAND_pseudo_bytes(seed,SHA_DIGEST_LENGTH);
+                               seed_is_random = 1;
+                               }
+                       else
+                               {
+                               seed_is_random = 0;
+                               seed_len=0; /* use random seed if 'seed_in' turns out to be bad*/
+                               }
+                       memcpy(buf,seed,SHA_DIGEST_LENGTH);
+                       memcpy(buf2,seed,SHA_DIGEST_LENGTH);
+                       /* precompute "SEED + 1" for step 7: */
+                       for (i=SHA_DIGEST_LENGTH-1; i >= 0; i--)
+                               {
+                               buf[i]++;
+                               if (buf[i] != 0) break;
+                               }
+
+                       /* step 2 */
+                       HASH(seed,SHA_DIGEST_LENGTH,md);
+                       HASH(buf,SHA_DIGEST_LENGTH,buf2);
+                       for (i=0; i<SHA_DIGEST_LENGTH; i++)
+                               md[i]^=buf2[i];
+
+                       /* step 3 */
+                       md[0]|=0x80;
+                       md[SHA_DIGEST_LENGTH-1]|=0x01;
+                       if (!BN_bin2bn(md,SHA_DIGEST_LENGTH,q)) goto err;
+
+                       /* step 4 */
+                       r = BN_is_prime_fasttest(q, DSS_prime_checks, callback, ctx3, cb_arg, seed_is_random);
+                       if (r > 0)
+                               break;
+                       if (r != 0)
+                               goto err;
+
+                       /* do a callback call */
+                       /* step 5 */
+                       }
+
+               if (callback != NULL) callback(2,0,cb_arg);
+               if (callback != NULL) callback(3,0,cb_arg);
+
+               /* step 6 */
+               counter=0;
+               /* "offset = 2" */
+
+               n=(bits-1)/160;
+               b=(bits-1)-n*160;
+
+               for (;;)
+                       {
+                       if (callback != NULL && counter != 0)
+                               callback(0,counter,cb_arg);
+
+                       /* step 7 */
+                       BN_zero(W);
+                       /* now 'buf' contains "SEED + offset - 1" */
+                       for (k=0; k<=n; k++)
+                               {
+                               /* obtain "SEED + offset + k" by incrementing: */
+                               for (i=SHA_DIGEST_LENGTH-1; i >= 0; i--)
+                                       {
+                                       buf[i]++;
+                                       if (buf[i] != 0) break;
+                                       }
+
+                               HASH(buf,SHA_DIGEST_LENGTH,md);
+
+                               /* step 8 */
+                               if (!BN_bin2bn(md,SHA_DIGEST_LENGTH,r0))
+                                       goto err;
+                               BN_lshift(r0,r0,160*k);
+                               BN_add(W,W,r0);
+                               }
+
+                       /* more of step 8 */
+                       BN_mask_bits(W,bits-1);
+                       BN_copy(X,W); /* this should be ok */
+                       BN_add(X,X,test); /* this should be ok */
+
+                       /* step 9 */
+                       BN_lshift1(r0,q);
+                       BN_mod(c,X,r0,ctx);
+                       BN_sub(r0,c,BN_value_one());
+                       BN_sub(p,X,r0);
+
+                       /* step 10 */
+                       if (BN_cmp(p,test) >= 0)
+                               {
+                               /* step 11 */
+                               r = BN_is_prime_fasttest(p, DSS_prime_checks, callback, ctx3, cb_arg, 1);
+                               if (r > 0)
+                                               goto end; /* found it */
+                               if (r != 0)
+                                       goto err;
+                               }
+
+                       /* step 13 */
+                       counter++;
+                       /* "offset = offset + n + 1" */
+
+                       /* step 14 */
+                       if (counter >= 4096) break;
+                       }
+               }
+end:
+       if (callback != NULL) callback(2,1,cb_arg);
+
+       /* We now need to generate g */
+       /* Set r0=(p-1)/q */
+       BN_sub(test,p,BN_value_one());
+       BN_div(r0,NULL,test,q,ctx);
+
+       BN_set_word(test,h);
+       BN_MONT_CTX_set(mont,p,ctx);
+
+       for (;;)
+               {
+               /* g=test^r0%p */
+               BN_mod_exp_mont(g,test,r0,p,ctx,mont);
+               if (!BN_is_one(g)) break;
+               BN_add(test,test,BN_value_one());
+               h++;
+               }
+
+       if (callback != NULL) callback(3,1,cb_arg);
+
+       ok=1;
+err:
+       if (!ok)
+               {
+               if (ret != NULL) DSA_free(ret);
+               }
+       else
+               {
+               ret->p=BN_dup(p);
+               ret->q=BN_dup(q);
+               ret->g=BN_dup(g);
+               if ((m > 1) && (seed_in != NULL)) memcpy(seed_in,seed,20);
+               if (counter_ret != NULL) *counter_ret=counter;
+               if (h_ret != NULL) *h_ret=h;
+               }
+       if (ctx != NULL) BN_CTX_free(ctx);
+       if (ctx2 != NULL)
+               {
+               BN_CTX_end(ctx2);
+               BN_CTX_free(ctx2);
+               }
+       if (ctx3 != NULL) BN_CTX_free(ctx3);
+       if (mont != NULL) BN_MONT_CTX_free(mont);
+       return(ok?ret:NULL);
+       }
+#endif