]> git.saurik.com Git - apple/security.git/blame - libsecurity_smime/lib/cmsencdata.c
Security-58286.41.2.tar.gz
[apple/security.git] / libsecurity_smime / lib / cmsencdata.c
CommitLineData
b1ab9ed8
A
1/*
2 * The contents of this file are subject to the Mozilla Public
3 * License Version 1.1 (the "License"); you may not use this file
4 * except in compliance with the License. You may obtain a copy of
5 * the License at http://www.mozilla.org/MPL/
6 *
7 * Software distributed under the License is distributed on an "AS
8 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
9 * implied. See the License for the specific language governing
10 * rights and limitations under the License.
11 *
12 * The Original Code is the Netscape security libraries.
13 *
14 * The Initial Developer of the Original Code is Netscape
15 * Communications Corporation. Portions created by Netscape are
16 * Copyright (C) 1994-2000 Netscape Communications Corporation. All
17 * Rights Reserved.
18 *
19 * Contributor(s):
20 *
21 * Alternatively, the contents of this file may be used under the
22 * terms of the GNU General Public License Version 2 or later (the
23 * "GPL"), in which case the provisions of the GPL are applicable
24 * instead of those above. If you wish to allow use of your
25 * version of this file only under the terms of the GPL and not to
26 * allow others to use your version of this file under the MPL,
27 * indicate your decision by deleting the provisions above and
28 * replace them with the notice and other provisions required by
29 * the GPL. If you do not delete the provisions above, a recipient
30 * may use your version of this file under either the MPL or the
31 * GPL.
32 */
33
34/*
35 * CMS encryptedData methods.
36 */
37
38#include <Security/SecCmsEncryptedData.h>
39
40#include <Security/SecCmsContentInfo.h>
41
42#include "cmslocal.h"
43
d8f41ccd 44#include "SecAsn1Item.h"
b1ab9ed8 45#include "secoid.h"
d8f41ccd 46
b1ab9ed8
A
47#include <security_asn1/secasn1.h>
48#include <security_asn1/secerr.h>
d8f41ccd 49#include <security_asn1/secport.h>
b1ab9ed8
A
50
51/*
52 * SecCmsEncryptedDataCreate - create an empty encryptedData object.
53 *
54 * "algorithm" specifies the bulk encryption algorithm to use.
55 * "keysize" is the key size.
56 *
57 * An error results in a return value of NULL and an error set.
58 * (Retrieve specific errors via PORT_GetError()/XP_GetError().)
59 */
60SecCmsEncryptedDataRef
61SecCmsEncryptedDataCreate(SecCmsMessageRef cmsg, SECOidTag algorithm, int keysize)
62{
63 void *mark;
64 SecCmsEncryptedDataRef encd;
65 PLArenaPool *poolp;
6b200bc3 66#if 0
b1ab9ed8 67 SECAlgorithmID *pbe_algid;
6b200bc3 68#endif
b1ab9ed8
A
69 OSStatus rv;
70
71 poolp = cmsg->poolp;
72
73 mark = PORT_ArenaMark(poolp);
74
75 encd = (SecCmsEncryptedDataRef)PORT_ArenaZAlloc(poolp, sizeof(SecCmsEncryptedData));
76 if (encd == NULL)
77 goto loser;
78
d8f41ccd 79 encd->contentInfo.cmsg = cmsg;
b1ab9ed8
A
80
81 /* version is set in SecCmsEncryptedDataEncodeBeforeStart() */
82
83 switch (algorithm) {
84 /* XXX hmmm... hardcoded algorithms? */
d8f41ccd
A
85 case SEC_OID_AES_128_CBC:
86 case SEC_OID_AES_192_CBC:
87 case SEC_OID_AES_256_CBC:
b1ab9ed8
A
88 case SEC_OID_RC2_CBC:
89 case SEC_OID_DES_EDE3_CBC:
90 case SEC_OID_DES_CBC:
d8f41ccd 91 rv = SecCmsContentInfoSetContentEncAlg(&(encd->contentInfo), algorithm, NULL, keysize);
b1ab9ed8
A
92 break;
93 default:
94 /* Assume password-based-encryption. At least, try that. */
95#if 1
96 // @@@ Fix me
6b200bc3
A
97 rv = SECFailure;
98 break;
b1ab9ed8
A
99#else
100 pbe_algid = PK11_CreatePBEAlgorithmID(algorithm, 1, NULL);
b1ab9ed8
A
101 if (pbe_algid == NULL) {
102 rv = SECFailure;
103 break;
104 }
d8f41ccd 105 rv = SecCmsContentInfoSetContentEncAlgID(&(encd->contentInfo), pbe_algid, keysize);
b1ab9ed8
A
106 SECOID_DestroyAlgorithmID (pbe_algid, PR_TRUE);
107 break;
6b200bc3 108#endif
b1ab9ed8
A
109 }
110 if (rv != SECSuccess)
111 goto loser;
112
113 PORT_ArenaUnmark(poolp, mark);
114 return encd;
115
116loser:
117 PORT_ArenaRelease(poolp, mark);
118 return NULL;
119}
120
121/*
122 * SecCmsEncryptedDataDestroy - destroy an encryptedData object
123 */
124void
125SecCmsEncryptedDataDestroy(SecCmsEncryptedDataRef encd)
126{
fa7225c8
A
127 if (encd == NULL) {
128 return;
129 }
b1ab9ed8
A
130 /* everything's in a pool, so don't worry about the storage */
131 SecCmsContentInfoDestroy(&(encd->contentInfo));
132 return;
133}
134
135/*
136 * SecCmsEncryptedDataGetContentInfo - return pointer to encryptedData object's contentInfo
137 */
138SecCmsContentInfoRef
139SecCmsEncryptedDataGetContentInfo(SecCmsEncryptedDataRef encd)
140{
141 return &(encd->contentInfo);
142}
143
144/*
145 * SecCmsEncryptedDataEncodeBeforeStart - do all the necessary things to a EncryptedData
146 * before encoding begins.
147 *
148 * In particular:
149 * - set the correct version value.
150 * - get the encryption key
151 */
152OSStatus
153SecCmsEncryptedDataEncodeBeforeStart(SecCmsEncryptedDataRef encd)
154{
155 int version;
156 SecSymmetricKeyRef bulkkey = NULL;
d8f41ccd 157 SecAsn1Item * dummy;
b1ab9ed8
A
158 SecCmsContentInfoRef cinfo = &(encd->contentInfo);
159
160 if (SecCmsArrayIsEmpty((void **)encd->unprotectedAttr))
161 version = SEC_CMS_ENCRYPTED_DATA_VERSION;
162 else
163 version = SEC_CMS_ENCRYPTED_DATA_VERSION_UPATTR;
164
d8f41ccd 165 dummy = SEC_ASN1EncodeInteger (encd->contentInfo.cmsg->poolp, &(encd->version), version);
b1ab9ed8
A
166 if (dummy == NULL)
167 return SECFailure;
168
169 /* now get content encryption key (bulk key) by using our cmsg callback */
d8f41ccd
A
170 if (encd->contentInfo.cmsg->decrypt_key_cb)
171 bulkkey = (*encd->contentInfo.cmsg->decrypt_key_cb)(encd->contentInfo.cmsg->decrypt_key_cb_arg,
b1ab9ed8
A
172 SecCmsContentInfoGetContentEncAlg(cinfo));
173 if (bulkkey == NULL)
174 return SECFailure;
175
176 /* store the bulk key in the contentInfo so that the encoder can find it */
177 SecCmsContentInfoSetBulkKey(cinfo, bulkkey);
178 CFRelease(bulkkey); /* This assumes the decrypt_key_cb hands us a copy of the key --mb */
179
180 return SECSuccess;
181}
182
183/*
184 * SecCmsEncryptedDataEncodeBeforeData - set up encryption
185 */
186OSStatus
187SecCmsEncryptedDataEncodeBeforeData(SecCmsEncryptedDataRef encd)
188{
189 SecCmsContentInfoRef cinfo;
190 SecSymmetricKeyRef bulkkey;
191 SECAlgorithmID *algid;
192
193 cinfo = &(encd->contentInfo);
194
195 /* find bulkkey and algorithm - must have been set by SecCmsEncryptedDataEncodeBeforeStart */
196 bulkkey = SecCmsContentInfoGetBulkKey(cinfo);
197 if (bulkkey == NULL)
198 return SECFailure;
199 algid = SecCmsContentInfoGetContentEncAlg(cinfo);
200 if (algid == NULL)
201 return SECFailure;
202
203 /* this may modify algid (with IVs generated in a token).
204 * it is therefore essential that algid is a pointer to the "real" contentEncAlg,
205 * not just to a copy */
d8f41ccd 206 cinfo->ciphcx = SecCmsCipherContextStartEncrypt(encd->contentInfo.cmsg->poolp, bulkkey, algid);
b1ab9ed8
A
207 CFRelease(bulkkey);
208 if (cinfo->ciphcx == NULL)
209 return SECFailure;
210
211 return SECSuccess;
212}
213
214/*
215 * SecCmsEncryptedDataEncodeAfterData - finalize this encryptedData for encoding
216 */
217OSStatus
218SecCmsEncryptedDataEncodeAfterData(SecCmsEncryptedDataRef encd)
219{
220 if (encd->contentInfo.ciphcx) {
221 SecCmsCipherContextDestroy(encd->contentInfo.ciphcx);
222 encd->contentInfo.ciphcx = NULL;
223 }
224
225 /* nothing to do after data */
226 return SECSuccess;
227}
228
229
230/*
231 * SecCmsEncryptedDataDecodeBeforeData - find bulk key & set up decryption
232 */
233OSStatus
234SecCmsEncryptedDataDecodeBeforeData(SecCmsEncryptedDataRef encd)
235{
236 SecSymmetricKeyRef bulkkey = NULL;
237 SecCmsContentInfoRef cinfo;
238 SECAlgorithmID *bulkalg;
239 OSStatus rv = SECFailure;
240
241 cinfo = &(encd->contentInfo);
242
243 bulkalg = SecCmsContentInfoGetContentEncAlg(cinfo);
244
d8f41ccd 245 if (encd->contentInfo.cmsg->decrypt_key_cb == NULL) /* no callback? no key../ */
b1ab9ed8
A
246 goto loser;
247
d8f41ccd 248 bulkkey = (*encd->contentInfo.cmsg->decrypt_key_cb)(encd->contentInfo.cmsg->decrypt_key_cb_arg, bulkalg);
b1ab9ed8
A
249 if (bulkkey == NULL)
250 /* no success finding a bulk key */
251 goto loser;
252
253 SecCmsContentInfoSetBulkKey(cinfo, bulkkey);
254
255 cinfo->ciphcx = SecCmsCipherContextStartDecrypt(bulkkey, bulkalg);
256 if (cinfo->ciphcx == NULL)
257 goto loser; /* error has been set by SecCmsCipherContextStartDecrypt */
258
259#if 1
260 // @@@ Not done yet
261#else
262 /*
263 * HACK ALERT!!
264 * For PKCS5 Encryption Algorithms, the bulkkey is actually a different
265 * structure. Therefore, we need to set the bulkkey to the actual key
266 * prior to freeing it.
267 */
268 if (SEC_PKCS5IsAlgorithmPBEAlg(bulkalg)) {
269 SEC_PKCS5KeyAndPassword *keyPwd = (SEC_PKCS5KeyAndPassword *)bulkkey;
270 bulkkey = keyPwd->key;
271 }
272#endif
273
274 /* we are done with (this) bulkkey now. */
275 CFRelease(bulkkey);
276
277 rv = SECSuccess;
278
279loser:
280 return rv;
281}
282
283/*
284 * SecCmsEncryptedDataDecodeAfterData - finish decrypting this encryptedData's content
285 */
286OSStatus
287SecCmsEncryptedDataDecodeAfterData(SecCmsEncryptedDataRef encd)
288{
289 if (encd->contentInfo.ciphcx) {
290 SecCmsCipherContextDestroy(encd->contentInfo.ciphcx);
291 encd->contentInfo.ciphcx = NULL;
292 }
293
294 return SECSuccess;
295}
296
297/*
298 * SecCmsEncryptedDataDecodeAfterEnd - finish decoding this encryptedData
299 */
300OSStatus
301SecCmsEncryptedDataDecodeAfterEnd(SecCmsEncryptedDataRef encd)
302{
303 /* apply final touches */
304 return SECSuccess;
305}