]> git.saurik.com Git - apple/network_cmds.git/blobdiff - rbootd.tproj/rbootd.c
network_cmds-115.tar.gz
[apple/network_cmds.git] / rbootd.tproj / rbootd.c
diff --git a/rbootd.tproj/rbootd.c b/rbootd.tproj/rbootd.c
deleted file mode 100644 (file)
index cf661b2..0000000
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
- * Copyright (c) 1999 Apple Computer, Inc. All rights reserved.
- *
- * @APPLE_LICENSE_HEADER_START@
- * 
- * "Portions Copyright (c) 1999 Apple Computer, Inc.  All Rights
- * Reserved.  This file contains Original Code and/or Modifications of
- * Original Code as defined in and that are subject to the Apple Public
- * Source License Version 1.0 (the 'License').  You may not use this file
- * except in compliance with the License.  Please obtain a copy of the
- * License at http://www.apple.com/publicsource and read it before using
- * this file.
- * 
- * The Original Code and all software distributed under the License are
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
- * License for the specific language governing rights and limitations
- * under the License."
- * 
- * @APPLE_LICENSE_HEADER_END@
- */
-/*
- * Copyright (c) 1988, 1992 The University of Utah and the Center
- *     for Software Science (CSS).
- * Copyright (c) 1992, 1993
- *     The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * the Center for Software Science of the University of Utah Computer
- * Science Department.  CSS requests users of this software to return
- * to css-dist@cs.utah.edu any improvements that they make and grant
- * CSS redistribution rights.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *     This product includes software developed by the University of
- *     California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *     @(#)rbootd.c    8.2 (Berkeley) 2/22/94
- *
- * Utah $Hdr: rbootd.c 3.1 92/07/06$
- * Author: Jeff Forys, University of Utah CSS
- */
-
-#ifndef lint
-static char copyright[] =
-"@(#) Copyright (c) 1992, 1993\n\
-       The Regents of the University of California.  All rights reserved.\n";
-#endif /* not lint */
-
-#ifndef lint
-static char sccsid[] = "@(#)rbootd.c   8.2 (Berkeley) 2/22/94";
-#endif /* not lint */
-
-#include <sys/param.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <syslog.h>
-#include <unistd.h>
-#include "defs.h"
-
-
-/* fd mask macros (backward compatibility with 4.2BSD) */
-#ifndef        FD_SET
-#ifdef notdef
-typedef        struct fd_set {         /* this should already be in 4.2 */
-       int fds_bits[1];
-} fd_set;
-#endif
-#define        FD_ZERO(p)      ((p)->fds_bits[0] = 0)
-#define        FD_SET(n, p)    ((p)->fds_bits[0] |= (1 << (n)))
-#define        FD_CLR(n, p)    ((p)->fds_bits[0] &= ~(1 << (n)))
-#define        FD_ISSET(n, p)  ((p)->fds_bits[0] & (1 << (n)))
-#endif
-
-int
-main(argc, argv)
-       int argc;
-       char *argv[];
-{
-       int c, fd, omask, maxfds;
-       fd_set rset;
-
-       /*
-        *  Find what name we are running under.
-        */
-       ProgName = (ProgName = rindex(argv[0],'/')) ? ++ProgName : *argv;
-
-       /*
-        *  Close any open file descriptors.
-        *  Temporarily leave stdin & stdout open for `-d',
-        *  and stderr open for any pre-syslog error messages.
-        */
-       {
-               int i, nfds = getdtablesize();
-
-               for (i = 0; i < nfds; i++)
-                       if (i != fileno(stdin) && i != fileno(stdout) &&
-                           i != fileno(stderr))
-                               (void) close(i);
-       }
-
-       /*
-        *  Parse any arguments.
-        */
-       while ((c = getopt(argc, argv, "adi:")) != EOF)
-               switch(c) {
-                   case 'a':
-                       BootAny++;
-                       break;
-                   case 'd':
-                       DebugFlg++;
-                       break;
-                   case 'i':
-                       IntfName = optarg;
-                       break;
-               }
-       for (; optind < argc; optind++) {
-               if (ConfigFile == NULL)
-                       ConfigFile = argv[optind];
-               else {
-                       fprintf(stderr,
-                               "%s: too many config files (`%s' ignored)\n",
-                               ProgName, argv[optind]);
-               }
-       }
-
-       if (ConfigFile == NULL)                 /* use default config file */
-               ConfigFile = DfltConfig;
-
-       if (DebugFlg) {
-               DbgFp = stdout;                         /* output to stdout */
-
-               (void) signal(SIGUSR1, SIG_IGN);        /* dont muck w/DbgFp */
-               (void) signal(SIGUSR2, SIG_IGN);
-       } else {
-               (void) fclose(stdin);                   /* dont need these */
-               (void) fclose(stdout);
-
-               /*
-                *  Fork off a child to do the work & exit.
-                */
-               switch(fork()) {
-                       case -1:        /* fork failed */
-                               fprintf(stderr, "%s: ", ProgName);
-                               perror("fork");
-                               Exit(0);
-                       case 0:         /* this is the CHILD */
-                               break;
-                       default:        /* this is the PARENT */
-                               _exit(0);
-               }
-
-               /*
-                *  Try to disassociate from the current tty.
-                */
-               {
-                       char *devtty = "/dev/tty";
-                       int i;
-
-                       if ((i = open(devtty, O_RDWR)) < 0) {
-                               /* probably already disassociated */
-                               if (setpgrp(0, 0) < 0) {
-                                       fprintf(stderr, "%s: ", ProgName);
-                                       perror("setpgrp");
-                               }
-                       } else {
-                               if (ioctl(i, (u_long)TIOCNOTTY, (char *)0) < 0){
-                                       fprintf(stderr, "%s: ", ProgName);
-                                       perror("ioctl");
-                               }
-                               (void) close(i);
-                       }
-               }
-
-               (void) signal(SIGUSR1, DebugOn);
-               (void) signal(SIGUSR2, DebugOff);
-       }
-
-       (void) fclose(stderr);          /* finished with it */
-
-#ifdef SYSLOG4_2
-       openlog(ProgName, LOG_PID);
-#else
-       openlog(ProgName, LOG_PID, LOG_DAEMON);
-#endif
-
-       /*
-        *  If no interface was specified, get one now.
-        *
-        *  This is convoluted because we want to get the default interface
-        *  name for the syslog("restarted") message.  If BpfGetIntfName()
-        *  runs into an error, it will return a syslog-able error message
-        *  (in `errmsg') which will be displayed here.
-        */
-       if (IntfName == NULL) {
-               char *errmsg;
-
-               if ((IntfName = BpfGetIntfName(&errmsg)) == NULL) {
-                       syslog(LOG_NOTICE, "restarted (??)");
-                       syslog(LOG_ERR, errmsg);
-                       Exit(0);
-               }
-       }
-
-       syslog(LOG_NOTICE, "restarted (%s)", IntfName);
-
-       (void) signal(SIGHUP, ReConfig);
-       (void) signal(SIGINT, Exit);
-       (void) signal(SIGTERM, Exit);
-
-       /*
-        *  Grab our host name and pid.
-        */
-       if (gethostname(MyHost, MAXHOSTNAMELEN) < 0) {
-               syslog(LOG_ERR, "gethostname: %m");
-               Exit(0);
-       }
-       MyHost[MAXHOSTNAMELEN] = '\0';
-
-       MyPid = getpid();
-
-       /*
-        *  Write proc's pid to a file.
-        */
-       {
-               FILE *fp;
-
-               if ((fp = fopen(PidFile, "w")) != NULL) {
-                       (void) fprintf(fp, "%d\n", MyPid);
-                       (void) fclose(fp);
-               } else {
-                       syslog(LOG_WARNING, "fopen: failed (%s)", PidFile);
-               }
-       }
-
-       /*
-        *  All boot files are relative to the boot directory, we might
-        *  as well chdir() there to make life easier.
-        */
-       if (chdir(BootDir) < 0) {
-               syslog(LOG_ERR, "chdir: %m (%s)", BootDir);
-               Exit(0);
-       }
-
-       /*
-        *  Initial configuration.
-        */
-       omask = sigblock(sigmask(SIGHUP));      /* prevent reconfig's */
-       if (GetBootFiles() == 0)                /* get list of boot files */
-               Exit(0);
-       if (ParseConfig() == 0)                 /* parse config file */
-               Exit(0);
-
-       /*
-        *  Open and initialize a BPF device for the appropriate interface.
-        *  If an error is encountered, a message is displayed and Exit()
-        *  is called.
-        */
-       fd = BpfOpen();
-
-       (void) sigsetmask(omask);               /* allow reconfig's */
-
-       /*
-        *  Main loop: receive a packet, determine where it came from,
-        *  and if we service this host, call routine to handle request.
-        */
-       maxfds = fd + 1;
-       FD_ZERO(&rset);
-       FD_SET(fd, &rset);
-       for (;;) {
-               struct timeval timeout;
-               fd_set r;
-               int nsel;
-
-               r = rset;
-
-               if (RmpConns == NULL) {         /* timeout isnt necessary */
-                       nsel = select(maxfds, &r, (fd_set *)0, (fd_set *)0,
-                                     (struct timeval *)0);
-               } else {
-                       timeout.tv_sec = RMP_TIMEOUT;
-                       timeout.tv_usec = 0;
-                       nsel = select(maxfds, &r, (fd_set *)0, (fd_set *)0,
-                                     &timeout);
-               }
-
-               if (nsel < 0) {
-                       if (errno == EINTR)
-                               continue;
-                       syslog(LOG_ERR, "select: %m");
-                       Exit(0);
-               } else if (nsel == 0) {         /* timeout */
-                       DoTimeout();                    /* clear stale conns */
-                       continue;
-               }
-
-               if (FD_ISSET(fd, &r)) {
-                       RMPCONN rconn;
-                       CLIENT *client, *FindClient();
-                       int doread = 1;
-
-                       while (BpfRead(&rconn, doread)) {
-                               doread = 0;
-
-                               if (DbgFp != NULL)      /* display packet */
-                                       DispPkt(&rconn,DIR_RCVD);
-
-                               omask = sigblock(sigmask(SIGHUP));
-
-                               /*
-                                *  If we do not restrict service, set the
-                                *  client to NULL (ProcessPacket() handles
-                                *  this).  Otherwise, check that we can
-                                *  service this host; if not, log a message
-                                *  and ignore the packet.
-                                */
-                               if (BootAny) {
-                                       client = NULL;
-                               } else if ((client=FindClient(&rconn))==NULL) {
-                                       syslog(LOG_INFO,
-                                              "%s: boot packet ignored",
-                                              EnetStr(&rconn));
-                                       (void) sigsetmask(omask);
-                                       continue;
-                               }
-
-                               ProcessPacket(&rconn,client);
-
-                               (void) sigsetmask(omask);
-                       }
-               }
-       }
-}
-
-/*
-**  DoTimeout -- Free any connections that have timed out.
-**
-**     Parameters:
-**             None.
-**
-**     Returns:
-**             Nothing.
-**
-**     Side Effects:
-**             - Timed out connections in `RmpConns' will be freed.
-*/
-void
-DoTimeout()
-{
-       register RMPCONN *rtmp;
-       struct timeval now;
-
-       (void) gettimeofday(&now, (struct timezone *)0);
-
-       /*
-        *  For each active connection, if RMP_TIMEOUT seconds have passed
-        *  since the last packet was sent, delete the connection.
-        */
-       for (rtmp = RmpConns; rtmp != NULL; rtmp = rtmp->next)
-               if ((rtmp->tstamp.tv_sec + RMP_TIMEOUT) < now.tv_sec) {
-                       syslog(LOG_WARNING, "%s: connection timed out (%u)",
-                              EnetStr(rtmp), rtmp->rmp.r_type);
-                       RemoveConn(rtmp);
-               }
-}
-
-/*
-**  FindClient -- Find client associated with a packet.
-**
-**     Parameters:
-**             rconn - the new packet. 
-**
-**     Returns:
-**             Pointer to client info if found, NULL otherwise.
-**
-**     Side Effects:
-**             None.
-**
-**     Warnings:
-**             - This routine must be called with SIGHUP blocked since
-**               a reconfigure can invalidate the information returned.
-*/
-
-CLIENT *
-FindClient(rconn)
-       register RMPCONN *rconn;
-{
-       register CLIENT *ctmp;
-
-       for (ctmp = Clients; ctmp != NULL; ctmp = ctmp->next)
-               if (bcmp((char *)&rconn->rmp.hp_hdr.saddr[0],
-                        (char *)&ctmp->addr[0], RMP_ADDRLEN) == 0)
-                       break;
-
-       return(ctmp);
-}
-
-/*
-**  Exit -- Log an error message and exit.
-**
-**     Parameters:
-**             sig - caught signal (or zero if not dying on a signal).
-**
-**     Returns:
-**             Does not return.
-**
-**     Side Effects:
-**             - This process ceases to exist.
-*/
-void
-Exit(sig)
-       int sig;
-{
-       if (sig > 0)
-               syslog(LOG_ERR, "going down on signal %d", sig);
-       else
-               syslog(LOG_ERR, "going down with fatal error");
-       BpfClose();
-       exit(1);
-}
-
-/*
-**  ReConfig -- Get new list of boot files and reread config files.
-**
-**     Parameters:
-**             None.
-**
-**     Returns:
-**             Nothing.
-**
-**     Side Effects:
-**             - All active connections are dropped.
-**             - List of boot-able files is changed.
-**             - List of clients is changed.
-**
-**     Warnings:
-**             - This routine must be called with SIGHUP blocked.
-*/
-void
-ReConfig(signo)
-       int signo;
-{
-       syslog(LOG_NOTICE, "reconfiguring boot server");
-
-       FreeConns();
-
-       if (GetBootFiles() == 0)
-               Exit(0);
-
-       if (ParseConfig() == 0)
-               Exit(0);
-}
-
-/*
-**  DebugOff -- Turn off debugging.
-**
-**     Parameters:
-**             None.
-**
-**     Returns:
-**             Nothing.
-**
-**     Side Effects:
-**             - Debug file is closed.
-*/
-void
-DebugOff(signo)
-       int signo;
-{
-       if (DbgFp != NULL)
-               (void) fclose(DbgFp);
-
-       DbgFp = NULL;
-}
-
-/*
-**  DebugOn -- Turn on debugging.
-**
-**     Parameters:
-**             None.
-**
-**     Returns:
-**             Nothing.
-**
-**     Side Effects:
-**             - Debug file is opened/truncated if not already opened,
-**               otherwise do nothing.
-*/
-void
-DebugOn(signo)
-       int signo;
-{
-       if (DbgFp == NULL) {
-               if ((DbgFp = fopen(DbgFile, "w")) == NULL)
-                       syslog(LOG_ERR, "can't open debug file (%s)", DbgFile);
-       }
-}