*
* The string parameter must be a C string literal.
* The length of the string, not including the terminating
- * <code>NUL</code>, must be specified as a constant.
+ * `NUL`, must be specified as a constant.
* @stable ICU 2.0
*/
#if !U_CHAR16_IS_TYPEDEF
*
* The UnicodeString class is not suitable for subclassing.
*
- * <p>For an overview of Unicode strings in C and C++ see the
- * <a href="http://userguide.icu-project.org/strings#TOC-Strings-in-C-C-">User Guide Strings chapter</a>.</p>
+ * For an overview of Unicode strings in C and C++ see the
+ * [User Guide Strings chapter](http://userguide.icu-project.org/strings#TOC-Strings-in-C-C-).
*
- * <p>In ICU, a Unicode string consists of 16-bit Unicode <em>code units</em>.
+ * In ICU, a Unicode string consists of 16-bit Unicode *code units*.
* A Unicode character may be stored with either one code unit
* (the most common case) or with a matched pair of special code units
* ("surrogates"). The data type for code units is char16_t.
- * For single-character handling, a Unicode character code <em>point</em> is a value
- * in the range 0..0x10ffff. ICU uses the UChar32 type for code points.</p>
+ * For single-character handling, a Unicode character code *point* is a value
+ * in the range 0..0x10ffff. ICU uses the UChar32 type for code points.
*
- * <p>Indexes and offsets into and lengths of strings always count code units, not code points.
+ * Indexes and offsets into and lengths of strings always count code units, not code points.
* This is the same as with multi-byte char* strings in traditional string handling.
* Operations on partial strings typically do not test for code point boundaries.
* If necessary, the user needs to take care of such boundaries by testing for the code unit
* values or by using functions like
* UnicodeString::getChar32Start() and UnicodeString::getChar32Limit()
- * (or, in C, the equivalent macros U16_SET_CP_START() and U16_SET_CP_LIMIT(), see utf.h).</p>
+ * (or, in C, the equivalent macros U16_SET_CP_START() and U16_SET_CP_LIMIT(), see utf.h).
*
* UnicodeString methods are more lenient with regard to input parameter values
* than other ICU APIs. In particular:
* - If indexes are out of bounds for a UnicodeString object
- * (<0 or >length()) then they are "pinned" to the nearest boundary.
+ * (< 0 or > length()) then they are "pinned" to the nearest boundary.
+ * - If the buffer passed to an insert/append/replace operation is owned by the
+ * target object, e.g., calling str.append(str), an extra copy may take place
+ * to ensure safety.
* - If primitive string pointer values (e.g., const char16_t * or char *)
* for input strings are NULL, then those input string parameters are treated
* as if they pointed to an empty string.
- * However, this is <em>not</em> the case for char * parameters for charset names
+ * However, this is *not* the case for char * parameters for charset names
* or other IDs.
* - Most UnicodeString methods do not take a UErrorCode parameter because
* there are usually very few opportunities for failure other than a shortage
* This includes the const UnicodeString & parameters for
* copy construction, assignment, and cloning.
*
- * <p>UnicodeString uses several storage methods.
+ * UnicodeString uses several storage methods.
* String contents can be stored inside the UnicodeString object itself,
* in an allocated and shared buffer, or in an outside buffer that is "aliased".
* Most of this is done transparently, but careful aliasing in particular provides
* significant performance improvements.
* Also, the internal buffer is accessible via special functions.
* For details see the
- * <a href="http://userguide.icu-project.org/strings#TOC-Maximizing-Performance-with-the-UnicodeString-Storage-Model">User Guide Strings chapter</a>.</p>
+ * [User Guide Strings chapter](http://userguide.icu-project.org/strings#TOC-Maximizing-Performance-with-the-UnicodeString-Storage-Model).
*
* @see utf.h
* @see CharacterIterator
/**
* Equality operator. Performs only bitwise comparison.
* @param text The UnicodeString to compare to this one.
- * @return TRUE if <TT>text</TT> contains the same characters as this one,
+ * @return TRUE if `text` contains the same characters as this one,
* FALSE otherwise.
* @stable ICU 2.0
*/
/**
* Inequality operator. Performs only bitwise comparison.
* @param text The UnicodeString to compare to this one.
- * @return FALSE if <TT>text</TT> contains the same characters as this one,
+ * @return FALSE if `text` contains the same characters as this one,
* TRUE otherwise.
* @stable ICU 2.0
*/
* Greater than operator. Performs only bitwise comparison.
* @param text The UnicodeString to compare to this one.
* @return TRUE if the characters in this are bitwise
- * greater than the characters in <code>text</code>, FALSE otherwise
+ * greater than the characters in `text`, FALSE otherwise
* @stable ICU 2.0
*/
inline UBool operator> (const UnicodeString& text) const;
* Less than operator. Performs only bitwise comparison.
* @param text The UnicodeString to compare to this one.
* @return TRUE if the characters in this are bitwise
- * less than the characters in <code>text</code>, FALSE otherwise
+ * less than the characters in `text`, FALSE otherwise
* @stable ICU 2.0
*/
inline UBool operator< (const UnicodeString& text) const;
* Greater than or equal operator. Performs only bitwise comparison.
* @param text The UnicodeString to compare to this one.
* @return TRUE if the characters in this are bitwise
- * greater than or equal to the characters in <code>text</code>, FALSE otherwise
+ * greater than or equal to the characters in `text`, FALSE otherwise
* @stable ICU 2.0
*/
inline UBool operator>= (const UnicodeString& text) const;
* Less than or equal operator. Performs only bitwise comparison.
* @param text The UnicodeString to compare to this one.
* @return TRUE if the characters in this are bitwise
- * less than or equal to the characters in <code>text</code>, FALSE otherwise
+ * less than or equal to the characters in `text`, FALSE otherwise
* @stable ICU 2.0
*/
inline UBool operator<= (const UnicodeString& text) const;
/**
* Compare the characters bitwise in this UnicodeString to
- * the characters in <code>text</code>.
+ * the characters in `text`.
* @param text The UnicodeString to compare to this one.
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>text</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>text</code>, +1 if the
+ * contains the same characters as `text`, -1 if the characters in
+ * this are bitwise less than the characters in `text`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>text</code>.
+ * in `text`.
* @stable ICU 2.0
*/
inline int8_t compare(const UnicodeString& text) const;
/**
* Compare the characters bitwise in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the characters
- * in the <b>entire string</b> <TT>text</TT>.
+ * [`start`, `start + length`) with the characters
+ * in the **entire string** `text`.
* (The parameters "start" and "length" are not applied to the other text "text".)
* @param start the offset at which the compare operation begins
* @param length the number of characters of text to compare.
* @param text the other text to be compared against this string.
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>text</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>text</code>, +1 if the
+ * contains the same characters as `text`, -1 if the characters in
+ * this are bitwise less than the characters in `text`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>text</code>.
+ * in `text`.
* @stable ICU 2.0
*/
inline int8_t compare(int32_t start,
/**
* Compare the characters bitwise in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
+ * [`start`, `start + length`) with the characters
+ * in `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`).
* @param start the offset at which the compare operation begins
* @param length the number of characters in this to compare.
* @param srcText the text to be compared
- * @param srcStart the offset into <TT>srcText</TT> to start comparison
- * @param srcLength the number of characters in <TT>src</TT> to compare
+ * @param srcStart the offset into `srcText` to start comparison
+ * @param srcLength the number of characters in `src` to compare
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>srcText</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>srcText</code>, +1 if the
+ * contains the same characters as `srcText`, -1 if the characters in
+ * this are bitwise less than the characters in `srcText`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>srcText</code>.
+ * in `srcText`.
* @stable ICU 2.0
*/
inline int8_t compare(int32_t start,
/**
* Compare the characters bitwise in this UnicodeString with the first
- * <TT>srcLength</TT> characters in <TT>srcChars</TT>.
+ * `srcLength` characters in `srcChars`.
* @param srcChars The characters to compare to this UnicodeString.
- * @param srcLength the number of characters in <TT>srcChars</TT> to compare
+ * @param srcLength the number of characters in `srcChars` to compare
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>srcChars</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>srcChars</code>, +1 if the
+ * contains the same characters as `srcChars`, -1 if the characters in
+ * this are bitwise less than the characters in `srcChars`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>srcChars</code>.
+ * in `srcChars`.
* @stable ICU 2.0
*/
inline int8_t compare(ConstChar16Ptr srcChars,
/**
* Compare the characters bitwise in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the first
- * <TT>length</TT> characters in <TT>srcChars</TT>
+ * [`start`, `start + length`) with the first
+ * `length` characters in `srcChars`
* @param start the offset at which the compare operation begins
* @param length the number of characters to compare.
* @param srcChars the characters to be compared
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>srcChars</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>srcChars</code>, +1 if the
+ * contains the same characters as `srcChars`, -1 if the characters in
+ * this are bitwise less than the characters in `srcChars`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>srcChars</code>.
+ * in `srcChars`.
* @stable ICU 2.0
*/
inline int8_t compare(int32_t start,
/**
* Compare the characters bitwise in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the characters
- * in <TT>srcChars</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
+ * [`start`, `start + length`) with the characters
+ * in `srcChars` in the range
+ * [`srcStart`, `srcStart + srcLength`).
* @param start the offset at which the compare operation begins
* @param length the number of characters in this to compare
* @param srcChars the characters to be compared
- * @param srcStart the offset into <TT>srcChars</TT> to start comparison
- * @param srcLength the number of characters in <TT>srcChars</TT> to compare
+ * @param srcStart the offset into `srcChars` to start comparison
+ * @param srcLength the number of characters in `srcChars` to compare
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>srcChars</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>srcChars</code>, +1 if the
+ * contains the same characters as `srcChars`, -1 if the characters in
+ * this are bitwise less than the characters in `srcChars`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>srcChars</code>.
+ * in `srcChars`.
* @stable ICU 2.0
*/
inline int8_t compare(int32_t start,
/**
* Compare the characters bitwise in the range
- * [<TT>start</TT>, <TT>limit</TT>) with the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcLimit</TT>).
+ * [`start`, `limit`) with the characters
+ * in `srcText` in the range
+ * [`srcStart`, `srcLimit`).
* @param start the offset at which the compare operation begins
* @param limit the offset immediately following the compare operation
* @param srcText the text to be compared
- * @param srcStart the offset into <TT>srcText</TT> to start comparison
- * @param srcLimit the offset into <TT>srcText</TT> to limit comparison
+ * @param srcStart the offset into `srcText` to start comparison
+ * @param srcLimit the offset into `srcText` to limit comparison
* @return The result of bitwise character comparison: 0 if this
- * contains the same characters as <code>srcText</code>, -1 if the characters in
- * this are bitwise less than the characters in <code>srcText</code>, +1 if the
+ * contains the same characters as `srcText`, -1 if the characters in
+ * this are bitwise less than the characters in `srcText`, +1 if the
* characters in this are bitwise greater than the characters
- * in <code>srcText</code>.
+ * in `srcText`.
* @stable ICU 2.0
*/
inline int8_t compareBetween(int32_t start,
uint32_t options) const;
/**
- * Determine if this starts with the characters in <TT>text</TT>
+ * Determine if this starts with the characters in `text`
* @param text The text to match.
- * @return TRUE if this starts with the characters in <TT>text</TT>,
+ * @return TRUE if this starts with the characters in `text`,
* FALSE otherwise
* @stable ICU 2.0
*/
inline UBool startsWith(const UnicodeString& text) const;
/**
- * Determine if this starts with the characters in <TT>srcText</TT>
- * in the range [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
+ * Determine if this starts with the characters in `srcText`
+ * in the range [`srcStart`, `srcStart + srcLength`).
* @param srcText The text to match.
- * @param srcStart the offset into <TT>srcText</TT> to start matching
- * @param srcLength the number of characters in <TT>srcText</TT> to match
- * @return TRUE if this starts with the characters in <TT>text</TT>,
+ * @param srcStart the offset into `srcText` to start matching
+ * @param srcLength the number of characters in `srcText` to match
+ * @return TRUE if this starts with the characters in `text`,
* FALSE otherwise
* @stable ICU 2.0
*/
int32_t srcLength) const;
/**
- * Determine if this starts with the characters in <TT>srcChars</TT>
+ * Determine if this starts with the characters in `srcChars`
* @param srcChars The characters to match.
- * @param srcLength the number of characters in <TT>srcChars</TT>
- * @return TRUE if this starts with the characters in <TT>srcChars</TT>,
+ * @param srcLength the number of characters in `srcChars`
+ * @return TRUE if this starts with the characters in `srcChars`,
* FALSE otherwise
* @stable ICU 2.0
*/
int32_t srcLength) const;
/**
- * Determine if this ends with the characters in <TT>srcChars</TT>
- * in the range [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
+ * Determine if this ends with the characters in `srcChars`
+ * in the range [`srcStart`, `srcStart + srcLength`).
* @param srcChars The characters to match.
- * @param srcStart the offset into <TT>srcText</TT> to start matching
- * @param srcLength the number of characters in <TT>srcChars</TT> to match
- * @return TRUE if this ends with the characters in <TT>srcChars</TT>, FALSE otherwise
+ * @param srcStart the offset into `srcText` to start matching
+ * @param srcLength the number of characters in `srcChars` to match
+ * @return TRUE if this ends with the characters in `srcChars`, FALSE otherwise
* @stable ICU 2.0
*/
inline UBool startsWith(const char16_t *srcChars,
int32_t srcLength) const;
/**
- * Determine if this ends with the characters in <TT>text</TT>
+ * Determine if this ends with the characters in `text`
* @param text The text to match.
- * @return TRUE if this ends with the characters in <TT>text</TT>,
+ * @return TRUE if this ends with the characters in `text`,
* FALSE otherwise
* @stable ICU 2.0
*/
inline UBool endsWith(const UnicodeString& text) const;
/**
- * Determine if this ends with the characters in <TT>srcText</TT>
- * in the range [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
+ * Determine if this ends with the characters in `srcText`
+ * in the range [`srcStart`, `srcStart + srcLength`).
* @param srcText The text to match.
- * @param srcStart the offset into <TT>srcText</TT> to start matching
- * @param srcLength the number of characters in <TT>srcText</TT> to match
- * @return TRUE if this ends with the characters in <TT>text</TT>,
+ * @param srcStart the offset into `srcText` to start matching
+ * @param srcLength the number of characters in `srcText` to match
+ * @return TRUE if this ends with the characters in `text`,
* FALSE otherwise
* @stable ICU 2.0
*/
int32_t srcLength) const;
/**
- * Determine if this ends with the characters in <TT>srcChars</TT>
+ * Determine if this ends with the characters in `srcChars`
* @param srcChars The characters to match.
- * @param srcLength the number of characters in <TT>srcChars</TT>
- * @return TRUE if this ends with the characters in <TT>srcChars</TT>,
+ * @param srcLength the number of characters in `srcChars`
+ * @return TRUE if this ends with the characters in `srcChars`,
* FALSE otherwise
* @stable ICU 2.0
*/
int32_t srcLength) const;
/**
- * Determine if this ends with the characters in <TT>srcChars</TT>
- * in the range [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
+ * Determine if this ends with the characters in `srcChars`
+ * in the range [`srcStart`, `srcStart + srcLength`).
* @param srcChars The characters to match.
- * @param srcStart the offset into <TT>srcText</TT> to start matching
- * @param srcLength the number of characters in <TT>srcChars</TT> to match
- * @return TRUE if this ends with the characters in <TT>srcChars</TT>,
+ * @param srcStart the offset into `srcText` to start matching
+ * @param srcLength the number of characters in `srcChars` to match
+ * @return TRUE if this ends with the characters in `srcChars`,
* FALSE otherwise
* @stable ICU 2.0
*/
/* Searching - bitwise only */
/**
- * Locate in this the first occurrence of the characters in <TT>text</TT>,
+ * Locate in this the first occurrence of the characters in `text`,
* using bitwise comparison.
* @param text The text to search for.
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(const UnicodeString& text) const;
/**
- * Locate in this the first occurrence of the characters in <TT>text</TT>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the first occurrence of the characters in `text`
+ * starting at offset `start`, using bitwise comparison.
* @param text The text to search for.
* @param start The offset at which searching will start.
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the first occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>text</TT>, using bitwise comparison.
+ * [`start`, `start + length`) of the characters
+ * in `text`, using bitwise comparison.
* @param text The text to search for.
* @param start The offset at which searching will start.
* @param length The number of characters to search
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the first occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>),
+ * [`start`, `start + length`) of the characters
+ * in `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`),
* using bitwise comparison.
* @param srcText The text to search for.
- * @param srcStart the offset into <TT>srcText</TT> at which
+ * @param srcStart the offset into `srcText` at which
* to start matching
- * @param srcLength the number of characters in <TT>srcText</TT> to match
+ * @param srcLength the number of characters in `srcText` to match
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the first occurrence of the characters in
- * <TT>srcChars</TT>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * `srcChars`
+ * starting at offset `start`, using bitwise comparison.
* @param srcChars The text to search for.
- * @param srcLength the number of characters in <TT>srcChars</TT> to match
+ * @param srcLength the number of characters in `srcChars` to match
* @param start the offset into this at which to start matching
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the first occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>srcChars</TT>, using bitwise comparison.
+ * [`start`, `start + length`) of the characters
+ * in `srcChars`, using bitwise comparison.
* @param srcChars The text to search for.
- * @param srcLength the number of characters in <TT>srcChars</TT>
+ * @param srcLength the number of characters in `srcChars`
* @param start The offset at which searching will start.
* @param length The number of characters to search
- * @return The offset into this of the start of <TT>srcChars</TT>,
+ * @return The offset into this of the start of `srcChars`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the first occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>srcChars</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>),
+ * [`start`, `start + length`) of the characters
+ * in `srcChars` in the range
+ * [`srcStart`, `srcStart + srcLength`),
* using bitwise comparison.
* @param srcChars The text to search for.
- * @param srcStart the offset into <TT>srcChars</TT> at which
+ * @param srcStart the offset into `srcChars` at which
* to start matching
- * @param srcLength the number of characters in <TT>srcChars</TT> to match
+ * @param srcLength the number of characters in `srcChars` to match
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
int32_t length) const;
/**
- * Locate in this the first occurrence of the BMP code point <code>c</code>,
+ * Locate in this the first occurrence of the BMP code point `c`,
* using bitwise comparison.
* @param c The code unit to search for.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(char16_t c) const;
/**
- * Locate in this the first occurrence of the code point <TT>c</TT>,
+ * Locate in this the first occurrence of the code point `c`,
* using bitwise comparison.
*
* @param c The code point to search for.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(UChar32 c) const;
/**
- * Locate in this the first occurrence of the BMP code point <code>c</code>,
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the first occurrence of the BMP code point `c`,
+ * starting at offset `start`, using bitwise comparison.
* @param c The code unit to search for.
* @param start The offset at which searching will start.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(char16_t c,
int32_t start) const;
/**
- * Locate in this the first occurrence of the code point <TT>c</TT>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the first occurrence of the code point `c`
+ * starting at offset `start`, using bitwise comparison.
*
* @param c The code point to search for.
* @param start The offset at which searching will start.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(UChar32 c,
int32_t start) const;
/**
- * Locate in this the first occurrence of the BMP code point <code>c</code>
- * in the range [<TT>start</TT>, <TT>start + length</TT>),
+ * Locate in this the first occurrence of the BMP code point `c`
+ * in the range [`start`, `start + length`),
* using bitwise comparison.
* @param c The code unit to search for.
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(char16_t c,
int32_t length) const;
/**
- * Locate in this the first occurrence of the code point <TT>c</TT>
- * in the range [<TT>start</TT>, <TT>start + length</TT>),
+ * Locate in this the first occurrence of the code point `c`
+ * in the range [`start`, `start + length`),
* using bitwise comparison.
*
* @param c The code point to search for.
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t indexOf(UChar32 c,
int32_t length) const;
/**
- * Locate in this the last occurrence of the characters in <TT>text</TT>,
+ * Locate in this the last occurrence of the characters in `text`,
* using bitwise comparison.
* @param text The text to search for.
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(const UnicodeString& text) const;
/**
- * Locate in this the last occurrence of the characters in <TT>text</TT>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the last occurrence of the characters in `text`
+ * starting at offset `start`, using bitwise comparison.
* @param text The text to search for.
* @param start The offset at which searching will start.
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the last occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>text</TT>, using bitwise comparison.
+ * [`start`, `start + length`) of the characters
+ * in `text`, using bitwise comparison.
* @param text The text to search for.
* @param start The offset at which searching will start.
* @param length The number of characters to search
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the last occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>),
+ * [`start`, `start + length`) of the characters
+ * in `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`),
* using bitwise comparison.
* @param srcText The text to search for.
- * @param srcStart the offset into <TT>srcText</TT> at which
+ * @param srcStart the offset into `srcText` at which
* to start matching
- * @param srcLength the number of characters in <TT>srcText</TT> to match
+ * @param srcLength the number of characters in `srcText` to match
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
int32_t length) const;
/**
- * Locate in this the last occurrence of the characters in <TT>srcChars</TT>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the last occurrence of the characters in `srcChars`
+ * starting at offset `start`, using bitwise comparison.
* @param srcChars The text to search for.
- * @param srcLength the number of characters in <TT>srcChars</TT> to match
+ * @param srcLength the number of characters in `srcChars` to match
* @param start the offset into this at which to start matching
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the last occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>srcChars</TT>, using bitwise comparison.
+ * [`start`, `start + length`) of the characters
+ * in `srcChars`, using bitwise comparison.
* @param srcChars The text to search for.
- * @param srcLength the number of characters in <TT>srcChars</TT>
+ * @param srcLength the number of characters in `srcChars`
* @param start The offset at which searching will start.
* @param length The number of characters to search
- * @return The offset into this of the start of <TT>srcChars</TT>,
+ * @return The offset into this of the start of `srcChars`,
* or -1 if not found.
* @stable ICU 2.0
*/
/**
* Locate in this the last occurrence in the range
- * [<TT>start</TT>, <TT>start + length</TT>) of the characters
- * in <TT>srcChars</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>),
+ * [`start`, `start + length`) of the characters
+ * in `srcChars` in the range
+ * [`srcStart`, `srcStart + srcLength`),
* using bitwise comparison.
* @param srcChars The text to search for.
- * @param srcStart the offset into <TT>srcChars</TT> at which
+ * @param srcStart the offset into `srcChars` at which
* to start matching
- * @param srcLength the number of characters in <TT>srcChars</TT> to match
+ * @param srcLength the number of characters in `srcChars` to match
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of the start of <TT>text</TT>,
+ * @return The offset into this of the start of `text`,
* or -1 if not found.
* @stable ICU 2.0
*/
int32_t length) const;
/**
- * Locate in this the last occurrence of the BMP code point <code>c</code>,
+ * Locate in this the last occurrence of the BMP code point `c`,
* using bitwise comparison.
* @param c The code unit to search for.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(char16_t c) const;
/**
- * Locate in this the last occurrence of the code point <TT>c</TT>,
+ * Locate in this the last occurrence of the code point `c`,
* using bitwise comparison.
*
* @param c The code point to search for.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(UChar32 c) const;
/**
- * Locate in this the last occurrence of the BMP code point <code>c</code>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the last occurrence of the BMP code point `c`
+ * starting at offset `start`, using bitwise comparison.
* @param c The code unit to search for.
* @param start The offset at which searching will start.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(char16_t c,
int32_t start) const;
/**
- * Locate in this the last occurrence of the code point <TT>c</TT>
- * starting at offset <TT>start</TT>, using bitwise comparison.
+ * Locate in this the last occurrence of the code point `c`
+ * starting at offset `start`, using bitwise comparison.
*
* @param c The code point to search for.
* @param start The offset at which searching will start.
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(UChar32 c,
int32_t start) const;
/**
- * Locate in this the last occurrence of the BMP code point <code>c</code>
- * in the range [<TT>start</TT>, <TT>start + length</TT>),
+ * Locate in this the last occurrence of the BMP code point `c`
+ * in the range [`start`, `start + length`),
* using bitwise comparison.
* @param c The code unit to search for.
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(char16_t c,
int32_t length) const;
/**
- * Locate in this the last occurrence of the code point <TT>c</TT>
- * in the range [<TT>start</TT>, <TT>start + length</TT>),
+ * Locate in this the last occurrence of the code point `c`
+ * in the range [`start`, `start + length`),
* using bitwise comparison.
*
* @param c The code point to search for.
* @param start the offset into this at which to start matching
* @param length the number of characters in this to search
- * @return The offset into this of <TT>c</TT>, or -1 if not found.
+ * @return The offset into this of `c`, or -1 if not found.
* @stable ICU 2.0
*/
inline int32_t lastIndexOf(UChar32 c,
/* Character access */
/**
- * Return the code unit at offset <tt>offset</tt>.
+ * Return the code unit at offset `offset`.
* If the offset is not valid (0..length()-1) then U+ffff is returned.
* @param offset a valid offset into the text
- * @return the code unit at offset <tt>offset</tt>
+ * @return the code unit at offset `offset`
* or 0xffff if the offset is not valid for this string
* @stable ICU 2.0
*/
inline char16_t charAt(int32_t offset) const;
/**
- * Return the code unit at offset <tt>offset</tt>.
+ * Return the code unit at offset `offset`.
* If the offset is not valid (0..length()-1) then U+ffff is returned.
* @param offset a valid offset into the text
- * @return the code unit at offset <tt>offset</tt>
+ * @return the code unit at offset `offset`
* @stable ICU 2.0
*/
inline char16_t operator[] (int32_t offset) const;
/**
* Return the code point that contains the code unit
- * at offset <tt>offset</tt>.
+ * at offset `offset`.
* If the offset is not valid (0..length()-1) then U+ffff is returned.
* @param offset a valid offset into the text
* that indicates the text offset of any of the code units
* that will be assembled into a code point (21-bit value) and returned
- * @return the code point of text at <tt>offset</tt>
+ * @return the code point of text at `offset`
* or 0xffff if the offset is not valid for this string
* @stable ICU 2.0
*/
* This behaves like CharacterIterator::move32(delta, kCurrent).
*
* Behavior for out-of-bounds indexes:
- * <code>moveIndex32</code> pins the input index to 0..length(), i.e.,
+ * `moveIndex32` pins the input index to 0..length(), i.e.,
* if the input index<0 then it is pinned to 0;
* if it is index>length() then it is pinned to length().
- * Afterwards, the index is moved by <code>delta</code> code points
+ * Afterwards, the index is moved by `delta` code points
* forward or backward,
* but no further backward than to 0 and no further forward than to length().
* The resulting index return value will be in between 0 and length(), inclusively.
*
* Examples:
- * <pre>
- * // s has code points 'a' U+10000 'b' U+10ffff U+2029
- * UnicodeString s=UNICODE_STRING("a\\U00010000b\\U0010ffff\\u2029", 31).unescape();
+ * \code
+ * // s has code points 'a' U+10000 'b' U+10ffff U+2029
+ * UnicodeString s(u"a\U00010000b\U0010ffff\u2029");
*
- * // initial index: position of U+10000
- * int32_t index=1;
+ * // initial index: position of U+10000
+ * int32_t index=1;
*
- * // the following examples will all result in index==4, position of U+10ffff
+ * // the following examples will all result in index==4, position of U+10ffff
*
- * // skip 2 code points from some position in the string
- * index=s.moveIndex32(index, 2); // skips U+10000 and 'b'
+ * // skip 2 code points from some position in the string
+ * index=s.moveIndex32(index, 2); // skips U+10000 and 'b'
*
- * // go to the 3rd code point from the start of s (0-based)
- * index=s.moveIndex32(0, 3); // skips 'a', U+10000, and 'b'
+ * // go to the 3rd code point from the start of s (0-based)
+ * index=s.moveIndex32(0, 3); // skips 'a', U+10000, and 'b'
*
- * // go to the next-to-last code point of s
- * index=s.moveIndex32(s.length(), -2); // backward-skips U+2029 and U+10ffff
- * </pre>
+ * // go to the next-to-last code point of s
+ * index=s.moveIndex32(s.length(), -2); // backward-skips U+2029 and U+10ffff
+ * \endcode
*
* @param index input code unit index
* @param delta (signed) code point count to move the index forward or backward
/**
* Copy the characters in the range
- * [<tt>start</tt>, <tt>start + length</tt>) into the array <tt>dst</tt>,
- * beginning at <tt>dstStart</tt>.
- * If the string aliases to <code>dst</code> itself as an external buffer,
+ * [`start`, `start + length`) into the array `dst`,
+ * beginning at `dstStart`.
+ * If the string aliases to `dst` itself as an external buffer,
* then extract() will not copy the contents.
*
* @param start offset of first character which will be copied into the array
* @param length the number of characters to extract
- * @param dst array in which to copy characters. The length of <tt>dst</tt>
- * must be at least (<tt>dstStart + length</tt>).
- * @param dstStart the offset in <TT>dst</TT> where the first character
+ * @param dst array in which to copy characters. The length of `dst`
+ * must be at least (`dstStart + length`).
+ * @param dstStart the offset in `dst` where the first character
* will be extracted
* @stable ICU 2.0
*/
* If the string itself does not fit into dest
* (length()>destCapacity) then the error code is set to U_BUFFER_OVERFLOW_ERROR.
*
- * If the string aliases to <code>dest</code> itself as an external buffer,
+ * If the string aliases to `dest` itself as an external buffer,
* then extract() will not copy the contents.
*
* @param dest Destination string buffer.
/**
* Copy the characters in the range
- * [<tt>start</tt>, <tt>start + length</tt>) into the UnicodeString
- * <tt>target</tt>.
+ * [`start`, `start + length`) into the UnicodeString
+ * `target`.
* @param start offset of first character which will be copied
* @param length the number of characters to extract
* @param target UnicodeString into which to copy characters.
- * @return A reference to <TT>target</TT>
* @stable ICU 2.0
*/
inline void extract(int32_t start,
UnicodeString& target) const;
/**
- * Copy the characters in the range [<tt>start</tt>, <tt>limit</tt>)
- * into the array <tt>dst</tt>, beginning at <tt>dstStart</tt>.
+ * Copy the characters in the range [`start`, `limit`)
+ * into the array `dst`, beginning at `dstStart`.
* @param start offset of first character which will be copied into the array
* @param limit offset immediately following the last character to be copied
- * @param dst array in which to copy characters. The length of <tt>dst</tt>
- * must be at least (<tt>dstStart + (limit - start)</tt>).
- * @param dstStart the offset in <TT>dst</TT> where the first character
+ * @param dst array in which to copy characters. The length of `dst`
+ * must be at least (`dstStart + (limit - start)`).
+ * @param dstStart the offset in `dst` where the first character
* will be extracted
* @stable ICU 2.0
*/
int32_t dstStart = 0) const;
/**
- * Copy the characters in the range [<tt>start</tt>, <tt>limit</tt>)
- * into the UnicodeString <tt>target</tt>. Replaceable API.
+ * Copy the characters in the range [`start`, `limit`)
+ * into the UnicodeString `target`. Replaceable API.
* @param start offset of first character which will be copied
* @param limit offset immediately following the last character to be copied
* @param target UnicodeString into which to copy characters.
- * @return A reference to <TT>target</TT>
* @stable ICU 2.0
*/
virtual void extractBetween(int32_t start,
/**
* Copy the characters in the range
- * [<tt>start</TT>, <tt>start + startLength</TT>) into an array of characters.
+ * [`start`, `start + startLength`) into an array of characters.
* All characters must be invariant (see utypes.h).
* Use US_INV as the last, signature-distinguishing parameter.
*
- * This function does not write any more than <code>targetCapacity</code>
+ * This function does not write any more than `targetCapacity`
* characters but returns the length of the entire output string
* so that one can allocate a larger buffer and call the function again
* if necessary.
/**
* Copy the characters in the range
- * [<tt>start</TT>, <tt>start + length</TT>) into an array of characters
+ * [`start`, `start + length`) into an array of characters
* in the platform's default codepage.
- * This function does not write any more than <code>targetLength</code>
+ * This function does not write any more than `targetLength`
* characters but returns the length of the entire output string
* so that one can allocate a larger buffer and call the function again
* if necessary.
* @param startLength the number of characters to extract
* @param target the target buffer for extraction
* @param targetLength the length of the target buffer
- * If <TT>target</TT> is NULL, then the number of bytes required for
- * <TT>target</TT> is returned.
+ * If `target` is NULL, then the number of bytes required for
+ * `target` is returned.
* @return the output string length, not including the terminating NUL
* @stable ICU 2.0
*/
/**
* Copy the characters in the range
- * [<tt>start</TT>, <tt>start + length</TT>) into an array of characters
+ * [`start`, `start + length`) into an array of characters
* in a specified codepage.
* The output string is NUL-terminated.
*
* @param target the target buffer for extraction
* @param codepage the desired codepage for the characters. 0 has
* the special meaning of the default codepage
- * If <code>codepage</code> is an empty string (<code>""</code>),
+ * If `codepage` is an empty string (`""`),
* then a simple conversion is performed on the codepage-invariant
* subset ("invariant characters") of the platform encoding. See utypes.h.
- * If <TT>target</TT> is NULL, then the number of bytes required for
- * <TT>target</TT> is returned. It is assumed that the target is big enough
+ * If `target` is NULL, then the number of bytes required for
+ * `target` is returned. It is assumed that the target is big enough
* to fit all of the characters.
* @return the output string length, not including the terminating NUL
* @stable ICU 2.0
/**
* Copy the characters in the range
- * [<tt>start</TT>, <tt>start + length</TT>) into an array of characters
+ * [`start`, `start + length`) into an array of characters
* in a specified codepage.
- * This function does not write any more than <code>targetLength</code>
+ * This function does not write any more than `targetLength`
* characters but returns the length of the entire output string
* so that one can allocate a larger buffer and call the function again
* if necessary.
* @param targetLength the length of the target buffer
* @param codepage the desired codepage for the characters. 0 has
* the special meaning of the default codepage
- * If <code>codepage</code> is an empty string (<code>""</code>),
+ * If `codepage` is an empty string (`""`),
* then a simple conversion is performed on the codepage-invariant
* subset ("invariant characters") of the platform encoding. See utypes.h.
- * If <TT>target</TT> is NULL, then the number of bytes required for
- * <TT>target</TT> is returned.
+ * If `target` is NULL, then the number of bytes required for
+ * `target` is returned.
* @return the output string length, not including the terminating NUL
* @stable ICU 2.0
*/
/**
* Assignment operator. Replace the characters in this UnicodeString
- * with the characters from <TT>srcText</TT>.
+ * with the characters from `srcText`.
*
* Starting with ICU 2.4, the assignment operator and the copy constructor
* allocate a new buffer and copy the buffer contents even for readonly aliases.
/**
* Almost the same as the assignment operator.
* Replace the characters in this UnicodeString
- * with the characters from <code>srcText</code>.
+ * with the characters from `srcText`.
*
* This function works the same as the assignment operator
* for all strings except for ones that are readonly aliases.
* @return *this
* @stable ICU 56
*/
- UnicodeString &operator=(UnicodeString &&src) U_NOEXCEPT {
- return moveFrom(src);
- }
-
- // do not use #ifndef U_HIDE_DRAFT_API for moveFrom, needed by non-draft API
- /**
- * Move assignment; might leave src in bogus state.
- * This string will have the same contents and state that the source string had.
- * The behavior is undefined if *this and src are the same object.
- *
- * Can be called explicitly, does not need C++11 support.
- * @param src source string
- * @return *this
- * @draft ICU 56
- */
- UnicodeString &moveFrom(UnicodeString &src) U_NOEXCEPT;
+ UnicodeString &operator=(UnicodeString &&src) U_NOEXCEPT;
/**
* Swap strings.
* @param s2 will get s1's contents and state
* @stable ICU 56
*/
- friend U_COMMON_API inline void U_EXPORT2
+ friend inline void U_EXPORT2
swap(UnicodeString &s1, UnicodeString &s2) U_NOEXCEPT {
s1.swap(s2);
}
/**
* Assignment operator. Replace the characters in this UnicodeString
- * with the code unit <TT>ch</TT>.
+ * with the code unit `ch`.
* @param ch the code unit to replace
* @return a reference to this
* @stable ICU 2.0
/**
* Assignment operator. Replace the characters in this UnicodeString
- * with the code point <TT>ch</TT>.
+ * with the code point `ch`.
* @param ch the code point to replace
* @return a reference to this
* @stable ICU 2.0
/**
* Set the text in the UnicodeString object to the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcText.length()</TT>).
- * <TT>srcText</TT> is not modified.
+ * in `srcText` in the range
+ * [`srcStart`, `srcText.length()`).
+ * `srcText` is not modified.
* @param srcText the source for the new characters
- * @param srcStart the offset into <TT>srcText</TT> where new characters
+ * @param srcStart the offset into `srcText` where new characters
* will be obtained
* @return a reference to this
* @stable ICU 2.2
/**
* Set the text in the UnicodeString object to the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
- * <TT>srcText</TT> is not modified.
+ * in `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`).
+ * `srcText` is not modified.
* @param srcText the source for the new characters
- * @param srcStart the offset into <TT>srcText</TT> where new characters
+ * @param srcStart the offset into `srcText` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcText</TT> in the
+ * @param srcLength the number of characters in `srcText` in the
* replace string.
* @return a reference to this
* @stable ICU 2.0
/**
* Set the text in the UnicodeString object to the characters in
- * <TT>srcText</TT>.
- * <TT>srcText</TT> is not modified.
+ * `srcText`.
+ * `srcText` is not modified.
* @param srcText the source for the new characters
* @return a reference to this
* @stable ICU 2.0
/**
* Set the characters in the UnicodeString object to the characters
- * in <TT>srcChars</TT>. <TT>srcChars</TT> is not modified.
+ * in `srcChars`. `srcChars` is not modified.
* @param srcChars the source for the new characters
* @param srcLength the number of Unicode characters in srcChars.
* @return a reference to this
/**
* Set the characters in the UnicodeString object to the code unit
- * <TT>srcChar</TT>.
+ * `srcChar`.
* @param srcChar the code unit which becomes the UnicodeString's character
* content
* @return a reference to this
* @stable ICU 2.0
*/
- UnicodeString& setTo(char16_t srcChar);
+ inline UnicodeString& setTo(char16_t srcChar);
/**
* Set the characters in the UnicodeString object to the code point
- * <TT>srcChar</TT>.
+ * `srcChar`.
* @param srcChar the code point which becomes the UnicodeString's character
* content
* @return a reference to this
* @stable ICU 2.0
*/
- UnicodeString& setTo(UChar32 srcChar);
+ inline UnicodeString& setTo(UChar32 srcChar);
/**
* Aliasing setTo() function, analogous to the readonly-aliasing char16_t* constructor.
* When using fastCopyFrom(), the text will be aliased again,
* so that both strings then alias the same readonly-text.
*
- * @param isTerminated specifies if <code>text</code> is <code>NUL</code>-terminated.
- * This must be true if <code>textLength==-1</code>.
+ * @param isTerminated specifies if `text` is `NUL`-terminated.
+ * This must be true if `textLength==-1`.
* @param text The characters to alias for the UnicodeString.
- * @param textLength The number of Unicode characters in <code>text</code> to alias.
+ * @param textLength The number of Unicode characters in `text` to alias.
* If -1, then this constructor will determine the length
- * by calling <code>u_strlen()</code>.
+ * by calling `u_strlen()`.
* @return a reference to this
* @stable ICU 2.0
*/
* as the string buffer itself and will in this case not copy the contents.
*
* @param buffer The characters to alias for the UnicodeString.
- * @param buffLength The number of Unicode characters in <code>buffer</code> to alias.
- * @param buffCapacity The size of <code>buffer</code> in char16_ts.
+ * @param buffLength The number of Unicode characters in `buffer` to alias.
+ * @param buffCapacity The size of `buffer` in char16_ts.
* @return a reference to this
* @stable ICU 2.0
*/
/* Append operations */
/**
- * Append operator. Append the code unit <TT>ch</TT> to the UnicodeString
+ * Append operator. Append the code unit `ch` to the UnicodeString
* object.
* @param ch the code unit to be appended
* @return a reference to this
inline UnicodeString& operator+= (char16_t ch);
/**
- * Append operator. Append the code point <TT>ch</TT> to the UnicodeString
+ * Append operator. Append the code point `ch` to the UnicodeString
* object.
* @param ch the code point to be appended
* @return a reference to this
inline UnicodeString& operator+= (UChar32 ch);
/**
- * Append operator. Append the characters in <TT>srcText</TT> to the
- * UnicodeString object. <TT>srcText</TT> is not modified.
+ * Append operator. Append the characters in `srcText` to the
+ * UnicodeString object. `srcText` is not modified.
* @param srcText the source for the new characters
* @return a reference to this
* @stable ICU 2.0
/**
* Append the characters
- * in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>) to the
- * UnicodeString object at offset <TT>start</TT>. <TT>srcText</TT>
+ * in `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`) to the
+ * UnicodeString object at offset `start`. `srcText`
* is not modified.
* @param srcText the source for the new characters
- * @param srcStart the offset into <TT>srcText</TT> where new characters
+ * @param srcStart the offset into `srcText` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcText</TT> in
+ * @param srcLength the number of characters in `srcText` in
* the append string
* @return a reference to this
* @stable ICU 2.0
int32_t srcLength);
/**
- * Append the characters in <TT>srcText</TT> to the UnicodeString object.
- * <TT>srcText</TT> is not modified.
+ * Append the characters in `srcText` to the UnicodeString object.
+ * `srcText` is not modified.
* @param srcText the source for the new characters
* @return a reference to this
* @stable ICU 2.0
inline UnicodeString& append(const UnicodeString& srcText);
/**
- * Append the characters in <TT>srcChars</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>) to the UnicodeString
+ * Append the characters in `srcChars` in the range
+ * [`srcStart`, `srcStart + srcLength`) to the UnicodeString
* object at offset
- * <TT>start</TT>. <TT>srcChars</TT> is not modified.
+ * `start`. `srcChars` is not modified.
* @param srcChars the source for the new characters
- * @param srcStart the offset into <TT>srcChars</TT> where new characters
+ * @param srcStart the offset into `srcChars` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcChars</TT> in
- * the append string; can be -1 if <TT>srcChars</TT> is NUL-terminated
+ * @param srcLength the number of characters in `srcChars` in
+ * the append string; can be -1 if `srcChars` is NUL-terminated
* @return a reference to this
* @stable ICU 2.0
*/
int32_t srcLength);
/**
- * Append the characters in <TT>srcChars</TT> to the UnicodeString object
- * at offset <TT>start</TT>. <TT>srcChars</TT> is not modified.
+ * Append the characters in `srcChars` to the UnicodeString object
+ * at offset `start`. `srcChars` is not modified.
* @param srcChars the source for the new characters
- * @param srcLength the number of Unicode characters in <TT>srcChars</TT>;
- * can be -1 if <TT>srcChars</TT> is NUL-terminated
+ * @param srcLength the number of Unicode characters in `srcChars`;
+ * can be -1 if `srcChars` is NUL-terminated
* @return a reference to this
* @stable ICU 2.0
*/
int32_t srcLength);
/**
- * Append the code unit <TT>srcChar</TT> to the UnicodeString object.
+ * Append the code unit `srcChar` to the UnicodeString object.
* @param srcChar the code unit to append
* @return a reference to this
* @stable ICU 2.0
inline UnicodeString& append(char16_t srcChar);
/**
- * Append the code point <TT>srcChar</TT> to the UnicodeString object.
+ * Append the code point `srcChar` to the UnicodeString object.
* @param srcChar the code point to append
* @return a reference to this
* @stable ICU 2.0
/* Insert operations */
/**
- * Insert the characters in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>) into the UnicodeString
- * object at offset <TT>start</TT>. <TT>srcText</TT> is not modified.
+ * Insert the characters in `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`) into the UnicodeString
+ * object at offset `start`. `srcText` is not modified.
* @param start the offset where the insertion begins
* @param srcText the source for the new characters
- * @param srcStart the offset into <TT>srcText</TT> where new characters
+ * @param srcStart the offset into `srcText` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcText</TT> in
+ * @param srcLength the number of characters in `srcText` in
* the insert string
* @return a reference to this
* @stable ICU 2.0
int32_t srcLength);
/**
- * Insert the characters in <TT>srcText</TT> into the UnicodeString object
- * at offset <TT>start</TT>. <TT>srcText</TT> is not modified.
+ * Insert the characters in `srcText` into the UnicodeString object
+ * at offset `start`. `srcText` is not modified.
* @param start the offset where the insertion begins
* @param srcText the source for the new characters
* @return a reference to this
const UnicodeString& srcText);
/**
- * Insert the characters in <TT>srcChars</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>) into the UnicodeString
- * object at offset <TT>start</TT>. <TT>srcChars</TT> is not modified.
+ * Insert the characters in `srcChars` in the range
+ * [`srcStart`, `srcStart + srcLength`) into the UnicodeString
+ * object at offset `start`. `srcChars` is not modified.
* @param start the offset at which the insertion begins
* @param srcChars the source for the new characters
- * @param srcStart the offset into <TT>srcChars</TT> where new characters
+ * @param srcStart the offset into `srcChars` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcChars</TT>
+ * @param srcLength the number of characters in `srcChars`
* in the insert string
* @return a reference to this
* @stable ICU 2.0
int32_t srcLength);
/**
- * Insert the characters in <TT>srcChars</TT> into the UnicodeString object
- * at offset <TT>start</TT>. <TT>srcChars</TT> is not modified.
+ * Insert the characters in `srcChars` into the UnicodeString object
+ * at offset `start`. `srcChars` is not modified.
* @param start the offset where the insertion begins
* @param srcChars the source for the new characters
* @param srcLength the number of Unicode characters in srcChars.
int32_t srcLength);
/**
- * Insert the code unit <TT>srcChar</TT> into the UnicodeString object at
- * offset <TT>start</TT>.
+ * Insert the code unit `srcChar` into the UnicodeString object at
+ * offset `start`.
* @param start the offset at which the insertion occurs
* @param srcChar the code unit to insert
* @return a reference to this
char16_t srcChar);
/**
- * Insert the code point <TT>srcChar</TT> into the UnicodeString object at
- * offset <TT>start</TT>.
+ * Insert the code point `srcChar` into the UnicodeString object at
+ * offset `start`.
* @param start the offset at which the insertion occurs
* @param srcChar the code point to insert
* @return a reference to this
/**
* Replace the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the characters in
- * <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>).
- * <TT>srcText</TT> is not modified.
+ * [`start`, `start + length`) with the characters in
+ * `srcText` in the range
+ * [`srcStart`, `srcStart + srcLength`).
+ * `srcText` is not modified.
* @param start the offset at which the replace operation begins
* @param length the number of characters to replace. The character at
- * <TT>start + length</TT> is not modified.
+ * `start + length` is not modified.
* @param srcText the source for the new characters
- * @param srcStart the offset into <TT>srcText</TT> where new characters
+ * @param srcStart the offset into `srcText` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcText</TT> in
+ * @param srcLength the number of characters in `srcText` in
* the replace string
* @return a reference to this
* @stable ICU 2.0
*/
- UnicodeString& replace(int32_t start,
+ inline UnicodeString& replace(int32_t start,
int32_t length,
const UnicodeString& srcText,
int32_t srcStart,
/**
* Replace the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>)
- * with the characters in <TT>srcText</TT>. <TT>srcText</TT> is
+ * [`start`, `start + length`)
+ * with the characters in `srcText`. `srcText` is
* not modified.
* @param start the offset at which the replace operation begins
* @param length the number of characters to replace. The character at
- * <TT>start + length</TT> is not modified.
+ * `start + length` is not modified.
* @param srcText the source for the new characters
* @return a reference to this
* @stable ICU 2.0
*/
- UnicodeString& replace(int32_t start,
+ inline UnicodeString& replace(int32_t start,
int32_t length,
const UnicodeString& srcText);
/**
* Replace the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the characters in
- * <TT>srcChars</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcStart + srcLength</TT>). <TT>srcChars</TT>
+ * [`start`, `start + length`) with the characters in
+ * `srcChars` in the range
+ * [`srcStart`, `srcStart + srcLength`). `srcChars`
* is not modified.
* @param start the offset at which the replace operation begins
* @param length the number of characters to replace. The character at
- * <TT>start + length</TT> is not modified.
+ * `start + length` is not modified.
* @param srcChars the source for the new characters
- * @param srcStart the offset into <TT>srcChars</TT> where new characters
+ * @param srcStart the offset into `srcChars` where new characters
* will be obtained
- * @param srcLength the number of characters in <TT>srcChars</TT>
+ * @param srcLength the number of characters in `srcChars`
* in the replace string
* @return a reference to this
* @stable ICU 2.0
*/
- UnicodeString& replace(int32_t start,
+ inline UnicodeString& replace(int32_t start,
int32_t length,
const char16_t *srcChars,
int32_t srcStart,
/**
* Replace the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the characters in
- * <TT>srcChars</TT>. <TT>srcChars</TT> is not modified.
+ * [`start`, `start + length`) with the characters in
+ * `srcChars`. `srcChars` is not modified.
* @param start the offset at which the replace operation begins
* @param length number of characters to replace. The character at
- * <TT>start + length</TT> is not modified.
+ * `start + length` is not modified.
* @param srcChars the source for the new characters
* @param srcLength the number of Unicode characters in srcChars
* @return a reference to this
/**
* Replace the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the code unit
- * <TT>srcChar</TT>.
+ * [`start`, `start + length`) with the code unit
+ * `srcChar`.
* @param start the offset at which the replace operation begins
* @param length the number of characters to replace. The character at
- * <TT>start + length</TT> is not modified.
+ * `start + length` is not modified.
* @param srcChar the new code unit
* @return a reference to this
* @stable ICU 2.0
/**
* Replace the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>) with the code point
- * <TT>srcChar</TT>.
+ * [`start`, `start + length`) with the code point
+ * `srcChar`.
* @param start the offset at which the replace operation begins
* @param length the number of characters to replace. The character at
- * <TT>start + length</TT> is not modified.
+ * `start + length` is not modified.
* @param srcChar the new code point
* @return a reference to this
* @stable ICU 2.0
UnicodeString& replace(int32_t start, int32_t length, UChar32 srcChar);
/**
- * Replace the characters in the range [<TT>start</TT>, <TT>limit</TT>)
- * with the characters in <TT>srcText</TT>. <TT>srcText</TT> is not modified.
+ * Replace the characters in the range [`start`, `limit`)
+ * with the characters in `srcText`. `srcText` is not modified.
* @param start the offset at which the replace operation begins
* @param limit the offset immediately following the replace range
* @param srcText the source for the new characters
const UnicodeString& srcText);
/**
- * Replace the characters in the range [<TT>start</TT>, <TT>limit</TT>)
- * with the characters in <TT>srcText</TT> in the range
- * [<TT>srcStart</TT>, <TT>srcLimit</TT>). <TT>srcText</TT> is not modified.
+ * Replace the characters in the range [`start`, `limit`)
+ * with the characters in `srcText` in the range
+ * [`srcStart`, `srcLimit`). `srcText` is not modified.
* @param start the offset at which the replace operation begins
* @param limit the offset immediately following the replace range
* @param srcText the source for the new characters
- * @param srcStart the offset into <TT>srcChars</TT> where new characters
+ * @param srcStart the offset into `srcChars` where new characters
* will be obtained
* @param srcLimit the offset immediately following the range to copy
- * in <TT>srcText</TT>
+ * in `srcText`
* @return a reference to this
* @stable ICU 2.0
*/
/**
* Replace a substring of this object with the given text.
- * @param start the beginning index, inclusive; <code>0 <= start
- * <= limit</code>.
- * @param limit the ending index, exclusive; <code>start <= limit
- * <= length()</code>.
- * @param text the text to replace characters <code>start</code>
- * to <code>limit - 1</code>
+ * @param start the beginning index, inclusive; `0 <= start <= limit`.
+ * @param limit the ending index, exclusive; `start <= limit <= length()`.
+ * @param text the text to replace characters `start` to `limit - 1`
* @stable ICU 2.0
*/
virtual void handleReplaceBetween(int32_t start,
* information. This method is used to duplicate or reorder substrings.
* The destination index must not overlap the source range.
*
- * @param start the beginning index, inclusive; <code>0 <= start <=
- * limit</code>.
- * @param limit the ending index, exclusive; <code>start <= limit <=
- * length()</code>.
+ * @param start the beginning index, inclusive; `0 <= start <= limit`.
+ * @param limit the ending index, exclusive; `start <= limit <= length()`.
* @param dest the destination index. The characters from
- * <code>start..limit-1</code> will be copied to <code>dest</code>.
- * Implementations of this method may assume that <code>dest <= start ||
- * dest >= limit</code>.
+ * `start..limit-1` will be copied to `dest`.
+ * Implementations of this method may assume that `dest <= start ||
+ * dest >= limit`.
* @stable ICU 2.0
*/
virtual void copy(int32_t start, int32_t limit, int32_t dest);
/**
* Replace all occurrences of characters in oldText with characters
* in newText
- * in the range [<TT>start</TT>, <TT>start + length</TT>).
+ * in the range [`start`, `start + length`).
* @param start the start of the range in which replace will performed
* @param length the length of the range in which replace will be performed
* @param oldText the text containing the search text
/**
* Replace all occurrences of characters in oldText in the range
- * [<TT>oldStart</TT>, <TT>oldStart + oldLength</TT>) with the characters
+ * [`oldStart`, `oldStart + oldLength`) with the characters
* in newText in the range
- * [<TT>newStart</TT>, <TT>newStart + newLength</TT>)
- * in the range [<TT>start</TT>, <TT>start + length</TT>).
+ * [`newStart`, `newStart + newLength`)
+ * in the range [`start`, `start + length`).
* @param start the start of the range in which replace will performed
* @param length the length of the range in which replace will be performed
* @param oldText the text containing the search text
- * @param oldStart the start of the search range in <TT>oldText</TT>
- * @param oldLength the length of the search range in <TT>oldText</TT>
+ * @param oldStart the start of the search range in `oldText`
+ * @param oldLength the length of the search range in `oldText`
* @param newText the text containing the replacement text
- * @param newStart the start of the replacement range in <TT>newText</TT>
- * @param newLength the length of the replacement range in <TT>newText</TT>
+ * @param newStart the start of the replacement range in `newText`
+ * @param newLength the length of the replacement range in `newText`
* @return a reference to this
* @stable ICU 2.0
*/
/**
* Remove the characters in the range
- * [<TT>start</TT>, <TT>start + length</TT>) from the UnicodeString object.
+ * [`start`, `start + length`) from the UnicodeString object.
* @param start the offset of the first character to remove
* @param length the number of characters to remove
* @return a reference to this
/**
* Remove the characters in the range
- * [<TT>start</TT>, <TT>limit</TT>) from the UnicodeString object.
+ * [`start`, `limit`) from the UnicodeString object.
* @param start the offset of the first character to remove
* @param limit the offset immediately following the range to remove
* @return a reference to this
/**
* Retain only the characters in the range
- * [<code>start</code>, <code>limit</code>) from the UnicodeString object.
- * Removes characters before <code>start</code> and at and after <code>limit</code>.
+ * [`start`, `limit`) from the UnicodeString object.
+ * Removes characters before `start` and at and after `limit`.
* @param start the offset of the first character to retain
* @param limit the offset immediately following the range to retain
* @return a reference to this
/* Length operations */
/**
- * Pad the start of this UnicodeString with the character <TT>padChar</TT>.
+ * Pad the start of this UnicodeString with the character `padChar`.
* If the length of this UnicodeString is less than targetLength,
* length() - targetLength copies of padChar will be added to the
* beginning of this UnicodeString.
char16_t padChar = 0x0020);
/**
- * Pad the end of this UnicodeString with the character <TT>padChar</TT>.
+ * Pad the end of this UnicodeString with the character `padChar`.
* If the length of this UnicodeString is less than targetLength,
* length() - targetLength copies of padChar will be added to the
* end of this UnicodeString.
char16_t padChar = 0x0020);
/**
- * Truncate this UnicodeString to the <TT>targetLength</TT>.
+ * Truncate this UnicodeString to the `targetLength`.
* @param targetLength the desired length of this UnicodeString.
* @return TRUE if the text was truncated, FALSE otherwise
* @stable ICU 2.0
inline UnicodeString& reverse(void);
/**
- * Reverse the range [<TT>start</TT>, <TT>start + length</TT>) in
+ * Reverse the range [`start`, `start + length`) in
* this UnicodeString.
* @param start the start of the range to reverse
* @param length the number of characters to to reverse
* If the length() was greater than minCapacity, then any contents after minCapacity
* may be lost.
* The buffer contents is not NUL-terminated by getBuffer().
- * If length()<getCapacity() then you can terminate it by writing a NUL
+ * If length() < getCapacity() then you can terminate it by writing a NUL
* at index length().
* - You must call releaseBuffer(newLength) before and in order to
* return to normal UnicodeString operation.
*
* The buffer contents is (probably) not NUL-terminated.
* You can check if it is with
- * <code>(s.length()<s.getCapacity() && buffer[s.length()]==0)</code>.
+ * `(s.length() < s.getCapacity() && buffer[s.length()]==0)`.
* (See getTerminatedBuffer().)
*
* The buffer may reside in read-only memory. Its contents must not
inline UnicodeString();
/**
- * Construct a UnicodeString with capacity to hold <TT>capacity</TT> char16_ts
+ * Construct a UnicodeString with capacity to hold `capacity` char16_ts
* @param capacity the number of char16_ts this UnicodeString should hold
* before a resize is necessary; if count is greater than 0 and count
* code points c take up more space than capacity, then capacity is adjusted
* Single char16_t (code unit) constructor.
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_CHAR_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_CHAR_EXPLICIT=explicit`
* on the compiler command line or similar.
* @param ch the character to place in the UnicodeString
* @stable ICU 2.0
* Single UChar32 (code point) constructor.
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_CHAR_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_CHAR_EXPLICIT=explicit`
* on the compiler command line or similar.
* @param ch the character to place in the UnicodeString
* @stable ICU 2.0
* char16_t* constructor.
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_STRING_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_STRING_EXPLICIT=explicit`
* on the compiler command line or similar.
- * @param text The characters to place in the UnicodeString. <TT>text</TT>
+ * @param text The characters to place in the UnicodeString. `text`
* must be NULL (U+0000) terminated.
* @stable ICU 2.0
*/
* Delegates to UnicodeString(const char16_t *).
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_STRING_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_STRING_EXPLICIT=explicit`
* on the compiler command line or similar.
* @param text NUL-terminated UTF-16 string
* @stable ICU 59
* Delegates to UnicodeString(const char16_t *).
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_STRING_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_STRING_EXPLICIT=explicit`
* on the compiler command line or similar.
* @param text NUL-terminated UTF-16 string
* @stable ICU 59
* Effectively the same as the default constructor, makes an empty string object.
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_STRING_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_STRING_EXPLICIT=explicit`
* on the compiler command line or similar.
* @param text nullptr
* @stable ICU 59
/**
* char16_t* constructor.
* @param text The characters to place in the UnicodeString.
- * @param textLength The number of Unicode characters in <TT>text</TT>
+ * @param textLength The number of Unicode characters in `text`
* to copy.
* @stable ICU 2.0
*/
* When using fastCopyFrom(), the text will be aliased again,
* so that both strings then alias the same readonly-text.
*
- * @param isTerminated specifies if <code>text</code> is <code>NUL</code>-terminated.
- * This must be true if <code>textLength==-1</code>.
+ * @param isTerminated specifies if `text` is `NUL`-terminated.
+ * This must be true if `textLength==-1`.
* @param text The characters to alias for the UnicodeString.
- * @param textLength The number of Unicode characters in <code>text</code> to alias.
+ * @param textLength The number of Unicode characters in `text` to alias.
* If -1, then this constructor will determine the length
- * by calling <code>u_strlen()</code>.
+ * by calling `u_strlen()`.
* @stable ICU 2.0
*/
UnicodeString(UBool isTerminated,
* as the string buffer itself and will in this case not copy the contents.
*
* @param buffer The characters to alias for the UnicodeString.
- * @param buffLength The number of Unicode characters in <code>buffer</code> to alias.
- * @param buffCapacity The size of <code>buffer</code> in char16_ts.
+ * @param buffLength The number of Unicode characters in `buffer` to alias.
+ * @param buffCapacity The size of `buffer` in char16_ts.
* @stable ICU 2.0
*/
UnicodeString(char16_t *buffer, int32_t buffLength, int32_t buffCapacity);
* UNICODE_STRING_SIMPLE.
*
* It is recommended to mark this constructor "explicit" by
- * <code>-DUNISTR_FROM_STRING_EXPLICIT=explicit</code>
+ * `-DUNISTR_FROM_STRING_EXPLICIT=explicit`
* on the compiler command line or similar.
* @param codepageData an array of bytes, null-terminated,
* in the platform's default codepage.
* Uses the default converter (and thus depends on the ICU conversion code)
* unless U_CHARSET_IS_UTF8 is set to 1.
* @param codepageData an array of bytes in the platform's default codepage.
- * @param dataLength The number of bytes in <TT>codepageData</TT>.
+ * @param dataLength The number of bytes in `codepageData`.
* @stable ICU 2.0
*/
UnicodeString(const char *codepageData, int32_t dataLength);
/**
* char* constructor.
* @param codepageData an array of bytes, null-terminated
- * @param codepage the encoding of <TT>codepageData</TT>. The special
- * value 0 for <TT>codepage</TT> indicates that the text is in the
+ * @param codepage the encoding of `codepageData`. The special
+ * value 0 for `codepage` indicates that the text is in the
* platform's default codepage.
*
- * If <code>codepage</code> is an empty string (<code>""</code>),
+ * If `codepage` is an empty string (`""`),
* then a simple conversion is performed on the codepage-invariant
* subset ("invariant characters") of the platform encoding. See utypes.h.
* Recommendation: For invariant-character strings use the constructor
/**
* char* constructor.
* @param codepageData an array of bytes.
- * @param dataLength The number of bytes in <TT>codepageData</TT>.
- * @param codepage the encoding of <TT>codepageData</TT>. The special
- * value 0 for <TT>codepage</TT> indicates that the text is in the
+ * @param dataLength The number of bytes in `codepageData`.
+ * @param codepage the encoding of `codepageData`. The special
+ * value 0 for `codepage` indicates that the text is in the
* platform's default codepage.
- * If <code>codepage</code> is an empty string (<code>""</code>),
+ * If `codepage` is an empty string (`""`),
* then a simple conversion is performed on the codepage-invariant
* subset ("invariant characters") of the platform encoding. See utypes.h.
* Recommendation: For invariant-character strings use the constructor
*
* For example:
* \code
- * void fn(const char *s) {
- * UnicodeString ustr(s, -1, US_INV);
- * // use ustr ...
- * }
+ * void fn(const char *s) {
+ * UnicodeString ustr(s, -1, US_INV);
+ * // use ustr ...
+ * }
* \endcode
- *
* @param src String using only invariant characters.
* @param length Length of src, or -1 if NUL-terminated.
* @param inv Signature-distinguishing paramater, use US_INV.
/**
* 'Substring' constructor from tail of source string.
* @param src The UnicodeString object to copy.
- * @param srcStart The offset into <tt>src</tt> at which to start copying.
+ * @param srcStart The offset into `src` at which to start copying.
* @stable ICU 2.2
*/
UnicodeString(const UnicodeString& src, int32_t srcStart);
/**
* 'Substring' constructor from subrange of source string.
* @param src The UnicodeString object to copy.
- * @param srcStart The offset into <tt>src</tt> at which to start copying.
- * @param srcLength The number of characters from <tt>src</tt> to copy.
+ * @param srcStart The offset into `src` at which to start copying.
+ * @param srcLength The number of characters from `src` to copy.
* @stable ICU 2.2
*/
UnicodeString(const UnicodeString& src, int32_t srcStart, int32_t srcLength);
*
* \\a => U+0007, \\b => U+0008, \\t => U+0009, \\n => U+000A,
* \\v => U+000B, \\f => U+000C, \\r => U+000D, \\e => U+001B,
- * \\" => U+0022, \\' => U+0027, \\? => U+003F, \\\\ => U+005C
+ * \\" => U+0022, \\' => U+0027, \\? => U+003F, \\\\ => U+005C
*
* Anything else following a backslash is generically escaped. For
* example, "[a\\-z]" returns "[a-z]".
* Real constructor for converting from codepage data.
* It assumes that it is called with !fRefCounted.
*
- * If <code>codepage==0</code>, then the default converter
+ * If `codepage==0`, then the default converter
* is used for the platform encoding.
- * If <code>codepage</code> is an empty string (<code>""</code>),
+ * If `codepage` is an empty string (`""`),
* then a simple conversion is performed on the codepage-invariant
* subset ("invariant characters") of the platform encoding. See utypes.h.
*/
projects / apple / icu.git / blobdiff