[apple/icu.git] / makefile

##
# Makefile for ICU
#
# See http://www.gnu.org/manual/make/html_chapter/make_toc.html#SEC_Contents
# for documentation on makefiles. Most of this was culled from the ncurses makefile.
#
##

#################################
#################################
# MAKE VARS
#################################
#################################

# ':=' denotes a "simply expanded" variable. It's value is
# set at the time of definition and it never recursively expands
# when used. This is in contrast to using '=' which denotes a
# recursively expanded variable.

SHELL := /bin/sh

# Sane defaults, which are typically overridden on the command line.
SRCROOT=$(shell pwd)
OBJROOT=$(SRCROOT)/build
DSTROOT=$(OBJROOT)
SYMROOT=$(OBJROOT)
APPLE_INTERNAL_DIR=/AppleInternal
RC_ARCHS=

# Disallow $(SRCROOT) == $(OBJROOT)
ifeq ($(OBJROOT), $(SRCROOT))
$(error SRCROOT same as OBJROOT)
endif

#################################
# Headers
#################################

# For installhdrs. Not every compiled module has an associated header. Normally,
# ICU installs headers as a sub-targe of the install target. But since we only want
# certain libraries to install (and since we link all of our own .o modules), we need
# invoke the headers targets ourselves. This may be problematic because there isn't a
# good way to dist-clean afterwards...we need to do explicit dist-cleans, especially if
# install the extra libraries.

EXTRA_HDRS =
# EXTRA_HDRS = ./extra/ustdio/ ./layout/ 
HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS)

#################################
# Install
#################################

# For install. We currently don't install EXTRA_LIBS. We also don't install the data 
# directly into the ICU library. It is now installed at /usr/share/icu/*.dat. Thus we 
# don't use DATA_OBJ anymore. This could change if we decide to move the data back into
# the icucore monolithic library.

INSTALL = /usr/bin/install
COMMON_OBJ = ./common/*.o
I18N_OBJ = ./i18n/*.o
STUB_DATA_OBJ = ./stubdata/*.o
COMMON_SRC = $(OBJROOT)/common/*.c
I18N_SRC = $(OBJROOT)/i18n/*.c
STUB_DATA_SRC = $(OBJROOT)/stubdata/*.c
EXTRA_LIBS =
#EXTRA_LIBS =./extra/ ./layout/ ./tools/ctestfw/ ./tools/toolutil/
#DATA_OBJ = ./data/out/build/*.o

#################################
# Cleaning
#################################

#We need to clean after installing.

EXTRA_CLEAN = 

# Some directories aren't cleaned recursively. Clean them manually...
MANUAL_CLEAN_TOOLS = ./tools/dumpce
MANUAL_CLEAN_EXTRA = ./extra/scrptrun ./samples/layout ./extra/ustdio ./extra
MANUAL_CLEAN_TEST = ./test/collperf ./test/iotest ./test/letest ./test/thaitest ./test/threadtest ./test/testmap ./test 
MANUAL_CLEAN_SAMPLE = ./samples/layout ./samples

CLEAN_SUBDIR = ./stubdata ./common ./i18n ./layout ./layoutex ./data ./tools ./$(MANUAL_CLEAN_TOOLS) $(MANUAL_CLEAN_EXTRA) $(MANUAL_CLEAN_TEST) $(MANUAL_CLEAN_SAMPLE) 

#################################
# Config flags
#################################

CONFIG_FLAGS = --disable-renaming --disable-extras --disable-ustdio --disable-layout \
	--disable-samples --with-data-packaging=archive --prefix=/usr/local \
	--srcdir=$(SRCROOT)/icuSources

#################################
# Install paths
#################################

# This may or may not be an appropriate name for the icu dylib. This naming scheme is 
# an attempt to follow the icu convention in naming the dylib and then having symbolic 
# links of easier to remember library names point it it. *UPDATE* the version and 
# sub-version variables as needed. The Core version should be 'A' until the core
# version changes it's API...that is a new version isn't backwards compatible.
# The ICU version/subversion should reflect the actual ICU version.

LIB_NAME = icucore
ICU_VERS = 32
ICU_SUBVERS = 0
CORE_VERS = A
DYLIB_SUFF = dylib
libdir = /usr/lib/

INSTALLED_DYLIB = lib$(LIB_NAME).$(CORE_VERS).$(DYLIB_SUFF)
DYLIB = lib$(LIB_NAME).$(DYLIB_SUFF)

#################################
# Data files
#################################

datadir=/usr/share/icu/
OPEN_SOURCE_VERSIONS_DIR=/usr/local/OpenSourceVersions/
OPEN_SOURCE_LICENSES_DIR=/usr/local/OpenSourceLicenses/
ICU_DATA_DIR= data/out
B_DATA_FILE=icudt$(ICU_VERS)b.dat
L_DATA_FILE=icudt$(ICU_VERS)l.dat

#################################
# Environment variables
#################################

# $(RC_ARCHS:%=-arch %) is a substitution reference. It denotes, in this case,
# for every value <val> in RC_ARCHS, replace it with "-arch <val>". Substitution
# references have the form $(var:a=b). We can insert the strip and prebinding commands
# into CFLAGS (and CXXFLAGS). This controls a lot of the external variables so we don't
# need to directly modify the ICU files (like for CFLAGS, etc).

LIBOVERRIDES=LIBICUDT="-L$(OBJROOT) -l$(LIB_NAME)" \
	LIBICUUC="-L$(OBJROOT) -l$(LIB_NAME)" \
	LIBICUI18N="-L$(OBJROOT) -l$(LIB_NAME)"

ENV=	APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions" \
	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
	RC_ARCHS="$(RC_ARCHS)" \
	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
	
ENV_CONFIGURE=	APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" -g -Os -fno-exceptions" \
	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" -g -Os -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
	RC_ARCHS="$(RC_ARCHS)" \
	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"

ENV_DEBUG = APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -O0 -g -fno-exceptions" \
	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -O0 -g -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
	RC_ARCHS="$(RC_ARCHS)" \
	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"

ENV_icu = ENV
ENV_debug = ENV_DEBUG

ORDERFILE=/usr/local/lib/OrderFiles/libicucore.order
ifeq "$(shell test -f $(ORDERFILE) && echo YES )" "YES"
       SECTORDER_FLAGS=-sectorder __TEXT __text $(ORDERFILE)
else
       SECTORDER_FLAGS=
endif


#################################
#################################
# TARGETS
#################################
#################################

.PHONY : icu check installsrc installhdrs clean install debug debug-install
.DELETE_ON_ERROR :

icu debug : $(OBJROOT)/Makefile
	(cd $(OBJROOT); \
		$(MAKE) $($(ENV_$@)); \
		tmpfile=`mktemp -t weakexternal` || exit 1; \
		nm -m $(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ) | fgrep "weak external" | fgrep -v "undefined" | sed -e 's/.*weak external //' | uniq | cat >$$tmpfile; \
		$($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \
			$(RC_ARCHS:%=-arch %) $(CXXFLAGS) $(LDFLAGS) -single_module $(SECTORDER_FLAGS) -unexported_symbols_list $$tmpfile \
			-install_name $(libdir)$(INSTALLED_DYLIB) -o ./$(INSTALLED_DYLIB) $(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ); \
		if test -f ./$(ICU_DATA_DIR)/$(B_DATA_FILE); then \
			ln -fs ./$(ICU_DATA_DIR)/$(B_DATA_FILE); \
		else \
			DYLD_LIBRARY_PATH="./lib:./stubdata" \
			./bin/icuswap -tb ./$(ICU_DATA_DIR)/$(L_DATA_FILE) $(B_DATA_FILE); \
		fi; \
		if test -f ./$(ICU_DATA_DIR)/$(L_DATA_FILE); then \
		    ln -fs ./$(ICU_DATA_DIR)/$(L_DATA_FILE); \
		else \
			DYLD_LIBRARY_PATH="./lib:./stubdata" \
			./bin/icuswap -tl ./$(ICU_DATA_DIR)/$(B_DATA_FILE) $(L_DATA_FILE); \
		fi; \
	);

check : icu
	(cd $(OBJROOT); \
		$(MAKE) $(ENV) check; \
	);

samples: icu
	(cd $(OBJROOT)/samples; \
		$(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \
	);

extra: icu
	(cd $(OBJROOT)/extra; \
		$(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \
	);

$(OBJROOT)/Makefile : 
	if test ! -d $(OBJROOT); then \
		mkdir -p $(OBJROOT); \
	fi;
	(cd $(OBJROOT); $(ENV_CONFIGURE) $(SRCROOT)/icuSources/configure $(CONFIG_FLAGS);)

debug-install:	debug installhdrs
	if test ! -d $(DSTROOT)$(libdir)/; then \
		$(INSTALL) -d -m 0775 $(DSTROOT)$(libdir)/; \
	fi;
	$(INSTALL) -b -m 0664 $(OBJROOT)/$(INSTALLED_DYLIB) $(DSTROOT)$(libdir)$(INSTALLED_DYLIB)
	(cd $(DSTROOT)$(libdir); \
	ln -fs  $(INSTALLED_DYLIB) $(DYLIB));
	for subdir in $(EXTRA_LIBS); do \
		(cd $(OBJROOT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV_DEBUG) install-library;) \
	done;
	if test ! -d $(DSTROOT)$(datadir)/; then \
		$(INSTALL) -d -m 0755 $(DSTROOT)$(datadir)/; \
	fi;	
	if test -f $(OBJROOT)/$(B_DATA_FILE); then \
		$(INSTALL) -b -m 0644  $(OBJROOT)/$(B_DATA_FILE) $(DSTROOT)$(datadir)$(B_DATA_FILE); \
	fi;
	if test -f $(OBJROOT)/$(L_DATA_FILE); then \
		$(INSTALL) -b -m 0644  $(OBJROOT)/$(L_DATA_FILE) $(DSTROOT)$(datadir)$(L_DATA_FILE); \
	fi;
	if test ! -d $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; then \
		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; \
	fi;
	$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist;
	if test ! -d $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; then \
		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; \
	fi;
	$(INSTALL) -b -m 0644 $(SRCROOT)/license.html $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)ICU.html;

#################################
# B&I TARGETS
#################################

# Since our sources are in icuSources (ignore the ICU subdirectory for now), we wish to 
# copy them to somewhere else. We tar it to stdout, cd to the appropriate directory, and
# untar from stdin.  We then look for all the CVS directories and remove them. We may have 
# to remove the .cvsignore files also.

installsrc :
	if test ! -d $(SRCROOT); then mkdir $(SRCROOT); fi;
	if test -d $(SRCROOT)/icuSources ; then rm -rf $(SRCROOT)/icuSources; fi;
	tar cf - ./makefile ./ICU.plist ./license.html ./icuSources | (cd $(SRCROOT) ; tar xfp -); \
	for i in `find $(SRCROOT)/icuSources/ | grep "CVS$$"` ; do \
		if test -d $$i ; then \
			rm -rf $$i; \
		fi; \
	done
	for j in `find $(SRCROOT)/icuSources/ | grep ".cvsignore"` ; do \
		if test -f $$j ; then \
			rm -f $$j; \
		fi; \
	done

# This works. Just not for ~ in the DSTROOT. We run configure first (in case it hasn't 
# been already). Then we make the install-headers target on specific makefiles (since 
# not every subdirectory/sub-component has a install-headers target).

installhdrs : $(OBJROOT)/Makefile
	(cd $(OBJROOT); \
	for subdir in $(HDR_MAKE_SUBDIR); do \
		(cd $$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV) install-headers); \
	done;);

# We run configure and run make first. This generates the .o files. We then link them 
# all up together into libicucore. Then we put it into its install location, create 
# symbolic links, and then strip the main dylib. Then install the remaining libraries. 
# We cleanup the sources folder.
	
install : installhdrs icu
	if test ! -d $(DSTROOT)$(libdir)/; then \
		$(INSTALL) -d -m 0775 $(DSTROOT)$(libdir)/; \
	fi;
	$(INSTALL) -b -m 0664 $(OBJROOT)/$(INSTALLED_DYLIB) $(DSTROOT)$(libdir)$(INSTALLED_DYLIB)
	(cd $(DSTROOT)$(libdir); \
	ln -fs  $(INSTALLED_DYLIB) $(DYLIB));
	cp $(OBJROOT)/$(INSTALLED_DYLIB) $(SYMROOT)/$(INSTALLED_DYLIB);
	strip -x -u -r -S $(DSTROOT)$(libdir)$(INSTALLED_DYLIB);
	for subdir in $(EXTRA_LIBS); do \
		(cd $(OBJROOT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV) install-library;) \
	done;
	if test ! -d $(DSTROOT)$(datadir)/; then \
		$(INSTALL) -d -m 0755 $(DSTROOT)$(datadir)/; \
	fi;	
	if test -f $(OBJROOT)/$(B_DATA_FILE); then \
		$(INSTALL) -b -m 0644  $(OBJROOT)/$(B_DATA_FILE) $(DSTROOT)$(datadir)$(B_DATA_FILE); \
	fi;
	if test -f $(OBJROOT)/$(L_DATA_FILE); then \
		$(INSTALL) -b -m 0644  $(OBJROOT)/$(L_DATA_FILE) $(DSTROOT)$(datadir)$(L_DATA_FILE); \
	fi;
	if test ! -d $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; then \
		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; \
	fi;
	$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist;
	if test ! -d $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; then \
		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; \
	fi;
	$(INSTALL) -b -m 0644 $(SRCROOT)/license.html $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)ICU.html;

clean :
	-rm -rf $(OBJROOT)
Commit	Line	Data
b75a7d8f A	1	##
	2	# Makefile for ICU
	3	#
	4	# See http://www.gnu.org/manual/make/html_chapter/make_toc.html#SEC_Contents
	5	# for documentation on makefiles. Most of this was culled from the ncurses makefile.
	6	#
	7	##
	8
	9	#################################
	10	#################################
	11	# MAKE VARS
	12	#################################
	13	#################################
	14
	15	# ':=' denotes a "simply expanded" variable. It's value is
	16	# set at the time of definition and it never recursively expands
	17	# when used. This is in contrast to using '=' which denotes a
	18	# recursively expanded variable.
	19
	20	SHELL := /bin/sh
	21
	22	# Sane defaults, which are typically overridden on the command line.
374ca955 A	23	SRCROOT=$(shell pwd)
	24	OBJROOT=$(SRCROOT)/build
	25	DSTROOT=$(OBJROOT)
b75a7d8f	26	SYMROOT=$(OBJROOT)
b75a7d8f A	27	APPLE_INTERNAL_DIR=/AppleInternal
	28	RC_ARCHS=
	29
374ca955 A	30	# Disallow $(SRCROOT) == $(OBJROOT)
	31	ifeq ($(OBJROOT), $(SRCROOT))
	32	$(error SRCROOT same as OBJROOT)
	33	endif
b75a7d8f A	34
	35	#################################
	36	# Headers
	37	#################################
	38
	39	# For installhdrs. Not every compiled module has an associated header. Normally,
	40	# ICU installs headers as a sub-targe of the install target. But since we only want
	41	# certain libraries to install (and since we link all of our own .o modules), we need
	42	# invoke the headers targets ourselves. This may be problematic because there isn't a
	43	# good way to dist-clean afterwards...we need to do explicit dist-cleans, especially if
	44	# install the extra libraries.
	45
	46	EXTRA_HDRS =
	47	# EXTRA_HDRS = ./extra/ustdio/ ./layout/
	48	HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS)
	49
	50	#################################
	51	# Install
	52	#################################
	53
	54	# For install. We currently don't install EXTRA_LIBS. We also don't install the data
	55	# directly into the ICU library. It is now installed at /usr/share/icu/*.dat. Thus we
	56	# don't use DATA_OBJ anymore. This could change if we decide to move the data back into
	57	# the icucore monolithic library.
	58
	59	INSTALL = /usr/bin/install
	60	COMMON_OBJ = ./common/*.o
	61	I18N_OBJ = ./i18n/*.o
	62	STUB_DATA_OBJ = ./stubdata/*.o
374ca955 A	63	COMMON_SRC = $(OBJROOT)/common/*.c
	64	I18N_SRC = $(OBJROOT)/i18n/*.c
	65	STUB_DATA_SRC = $(OBJROOT)/stubdata/*.c
b75a7d8f A	66	EXTRA_LIBS =
	67	#EXTRA_LIBS =./extra/ ./layout/ ./tools/ctestfw/ ./tools/toolutil/
	68	#DATA_OBJ = ./data/out/build/*.o
	69
	70	#################################
	71	# Cleaning
	72	#################################
	73
	74	#We need to clean after installing.
	75
	76	EXTRA_CLEAN =
	77
	78	# Some directories aren't cleaned recursively. Clean them manually...
	79	MANUAL_CLEAN_TOOLS = ./tools/dumpce
	80	MANUAL_CLEAN_EXTRA = ./extra/scrptrun ./samples/layout ./extra/ustdio ./extra
	81	MANUAL_CLEAN_TEST = ./test/collperf ./test/iotest ./test/letest ./test/thaitest ./test/threadtest ./test/testmap ./test
	82	MANUAL_CLEAN_SAMPLE = ./samples/layout ./samples
	83
	84	CLEAN_SUBDIR = ./stubdata ./common ./i18n ./layout ./layoutex ./data ./tools ./$(MANUAL_CLEAN_TOOLS) $(MANUAL_CLEAN_EXTRA) $(MANUAL_CLEAN_TEST) $(MANUAL_CLEAN_SAMPLE)
	85
	86	#################################
	87	# Config flags
	88	#################################
	89
374ca955 A	90	CONFIG_FLAGS = --disable-renaming --disable-extras --disable-ustdio --disable-layout \
	91	--disable-samples --with-data-packaging=archive --prefix=/usr/local \
	92	--srcdir=$(SRCROOT)/icuSources
b75a7d8f A	93
	94	#################################
	95	# Install paths
	96	#################################
	97
	98	# This may or may not be an appropriate name for the icu dylib. This naming scheme is
	99	# an attempt to follow the icu convention in naming the dylib and then having symbolic
	100	# links of easier to remember library names point it it. UPDATE the version and
	101	# sub-version variables as needed. The Core version should be 'A' until the core
	102	# version changes it's API...that is a new version isn't backwards compatible.
	103	# The ICU version/subversion should reflect the actual ICU version.
	104
374ca955 A	105	LIB_NAME = icucore
374ca955 A	106	ICU_VERS = 32
b75a7d8f A	107	ICU_SUBVERS = 0
	108	CORE_VERS = A
	109	DYLIB_SUFF = dylib
	110	libdir = /usr/lib/
	111
374ca955 A	112	INSTALLED_DYLIB = lib$(LIB_NAME).$(CORE_VERS).$(DYLIB_SUFF)
374ca955 A	113	DYLIB = lib$(LIB_NAME).$(DYLIB_SUFF)
b75a7d8f A	114
	115	#################################
	116	# Data files
	117	#################################
	118
	119	datadir=/usr/share/icu/
374ca955 A	120	OPEN_SOURCE_VERSIONS_DIR=/usr/local/OpenSourceVersions/
	121	OPEN_SOURCE_LICENSES_DIR=/usr/local/OpenSourceLicenses/
	122	ICU_DATA_DIR= data/out
b75a7d8f A	123	B_DATA_FILE=icudt$(ICU_VERS)b.dat
	124	L_DATA_FILE=icudt$(ICU_VERS)l.dat
	125
374ca955 A	126	#################################
	127	# Environment variables
	128	#################################
	129
	130	# $(RC_ARCHS:%=-arch %) is a substitution reference. It denotes, in this case,
	131	# for every value <val> in RC_ARCHS, replace it with "-arch <val>". Substitution
	132	# references have the form $(var:a=b). We can insert the strip and prebinding commands
	133	# into CFLAGS (and CXXFLAGS). This controls a lot of the external variables so we don't
	134	# need to directly modify the ICU files (like for CFLAGS, etc).
	135
	136	LIBOVERRIDES=LIBICUDT="-L$(OBJROOT) -l$(LIB_NAME)" \
	137	LIBICUUC="-L$(OBJROOT) -l$(LIB_NAME)" \
	138	LIBICUI18N="-L$(OBJROOT) -l$(LIB_NAME)"
	139
	140	ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
	141	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions" \
4648c0c3	142	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
374ca955 A	143	RC_ARCHS="$(RC_ARCHS)" \
	144	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
	145
	146	ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
	147	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" -g -Os -fno-exceptions" \
4648c0c3	148	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" -g -Os -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
374ca955 A	149	RC_ARCHS="$(RC_ARCHS)" \
	150	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
	151
	152	ENV_DEBUG = APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
	153	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -O0 -g -fno-exceptions" \
4648c0c3	154	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -O0 -g -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
374ca955 A	155	RC_ARCHS="$(RC_ARCHS)" \
	156	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
	157
	158	ENV_icu = ENV
	159	ENV_debug = ENV_DEBUG
	160
	161	ORDERFILE=/usr/local/lib/OrderFiles/libicucore.order
	162	ifeq "$(shell test -f $(ORDERFILE) && echo YES )" "YES"
	163	SECTORDER_FLAGS=-sectorder __TEXT __text $(ORDERFILE)
	164	else
	165	SECTORDER_FLAGS=
	166	endif
	167
	168
b75a7d8f A	169	#################################
	170	#################################
	171	# TARGETS
	172	#################################
	173	#################################
374ca955 A	174
	175	.PHONY : icu check installsrc installhdrs clean install debug debug-install
	176	.DELETE_ON_ERROR :
	177
	178	icu debug : $(OBJROOT)/Makefile
	179	(cd $(OBJROOT); \
	180	$(MAKE) $($(ENV_$@)); \
4648c0c3 A	181	tmpfile=`mktemp -t weakexternal` \|\| exit 1; \
4648c0c3 A	182	nm -m $(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ) \| fgrep "weak external" \| fgrep -v "undefined" \| sed -e 's/.*weak external //' \| uniq \| cat >$$tmpfile; \
374ca955	183	$($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \
4648c0c3	184	$(RC_ARCHS:%=-arch %) $(CXXFLAGS) $(LDFLAGS) -single_module $(SECTORDER_FLAGS) -unexported_symbols_list $$tmpfile \
374ca955 A	185	-install_name $(libdir)$(INSTALLED_DYLIB) -o ./$(INSTALLED_DYLIB) $(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ); \
	186	if test -f ./$(ICU_DATA_DIR)/$(B_DATA_FILE); then \
	187	ln -fs ./$(ICU_DATA_DIR)/$(B_DATA_FILE); \
	188	else \
	189	DYLD_LIBRARY_PATH="./lib:./stubdata" \
	190	./bin/icuswap -tb ./$(ICU_DATA_DIR)/$(L_DATA_FILE) $(B_DATA_FILE); \
	191	fi; \
	192	if test -f ./$(ICU_DATA_DIR)/$(L_DATA_FILE); then \
	193	ln -fs ./$(ICU_DATA_DIR)/$(L_DATA_FILE); \
	194	else \
	195	DYLD_LIBRARY_PATH="./lib:./stubdata" \
	196	./bin/icuswap -tl ./$(ICU_DATA_DIR)/$(B_DATA_FILE) $(L_DATA_FILE); \
	197	fi; \
	198	);
	199
	200	check : icu
	201	(cd $(OBJROOT); \
	202	$(MAKE) $(ENV) check; \
	203	);
	204
	205	samples: icu
	206	(cd $(OBJROOT)/samples; \
	207	$(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \
	208	);
	209
	210	extra: icu
	211	(cd $(OBJROOT)/extra; \
	212	$(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \
	213	);
	214
	215	$(OBJROOT)/Makefile :
	216	if test ! -d $(OBJROOT); then \
	217	mkdir -p $(OBJROOT); \
	218	fi;
	219	(cd $(OBJROOT); $(ENV_CONFIGURE) $(SRCROOT)/icuSources/configure $(CONFIG_FLAGS);)
	220
	221	debug-install: debug installhdrs
	222	if test ! -d $(DSTROOT)$(libdir)/; then \
	223	$(INSTALL) -d -m 0775 $(DSTROOT)$(libdir)/; \
	224	fi;
	225	$(INSTALL) -b -m 0664 $(OBJROOT)/$(INSTALLED_DYLIB) $(DSTROOT)$(libdir)$(INSTALLED_DYLIB)
	226	(cd $(DSTROOT)$(libdir); \
	227	ln -fs $(INSTALLED_DYLIB) $(DYLIB));
	228	for subdir in $(EXTRA_LIBS); do \
	229	(cd $(OBJROOT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV_DEBUG) install-library;) \
	230	done;
	231	if test ! -d $(DSTROOT)$(datadir)/; then \
	232	$(INSTALL) -d -m 0755 $(DSTROOT)$(datadir)/; \
	233	fi;
	234	if test -f $(OBJROOT)/$(B_DATA_FILE); then \
	235	$(INSTALL) -b -m 0644 $(OBJROOT)/$(B_DATA_FILE) $(DSTROOT)$(datadir)$(B_DATA_FILE); \
	236	fi;
	237	if test -f $(OBJROOT)/$(L_DATA_FILE); then \
	238	$(INSTALL) -b -m 0644 $(OBJROOT)/$(L_DATA_FILE) $(DSTROOT)$(datadir)$(L_DATA_FILE); \
	239	fi;
	240	if test ! -d $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; then \
	241	$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; \
	242	fi;
	243	$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist;
	244	if test ! -d $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; then \
	245	$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; \
	246	fi;
	247	$(INSTALL) -b -m 0644 $(SRCROOT)/license.html $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)ICU.html;
	248
249	#################################
250	# B&I TARGETS
251	#################################
252
b75a7d8f A	253	# Since our sources are in icuSources (ignore the ICU subdirectory for now), we wish to
	254	# copy them to somewhere else. We tar it to stdout, cd to the appropriate directory, and
	255	# untar from stdin. We then look for all the CVS directories and remove them. We may have
	256	# to remove the .cvsignore files also.
	257
	258	installsrc :
	259	if test ! -d $(SRCROOT); then mkdir $(SRCROOT); fi;
	260	if test -d $(SRCROOT)/icuSources ; then rm -rf $(SRCROOT)/icuSources; fi;
374ca955	261	tar cf - ./makefile ./ICU.plist ./license.html ./icuSources \| (cd $(SRCROOT) ; tar xfp -); \
b75a7d8f A	262	for i in `find $(SRCROOT)/icuSources/ \| grep "CVS$$"` ; do \
	263	if test -d $$i ; then \
	264	rm -rf $$i; \
	265	fi; \
	266	done
	267	for j in `find $(SRCROOT)/icuSources/ \| grep ".cvsignore"` ; do \
	268	if test -f $$j ; then \
	269	rm -f $$j; \
	270	fi; \
	271	done
	272
	273	# This works. Just not for ~ in the DSTROOT. We run configure first (in case it hasn't
	274	# been already). Then we make the install-headers target on specific makefiles (since
	275	# not every subdirectory/sub-component has a install-headers target).
	276
374ca955 A	277	installhdrs : $(OBJROOT)/Makefile
374ca955 A	278	(cd $(OBJROOT); \
b75a7d8f A	279	for subdir in $(HDR_MAKE_SUBDIR); do \
b75a7d8f A	280	(cd $$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV) install-headers); \
374ca955 A	281	done;);
374ca955 A	282
b75a7d8f A	283	# We run configure and run make first. This generates the .o files. We then link them
	284	# all up together into libicucore. Then we put it into its install location, create
	285	# symbolic links, and then strip the main dylib. Then install the remaining libraries.
	286	# We cleanup the sources folder.
	287
374ca955	288	install : installhdrs icu
b75a7d8f A	289	if test ! -d $(DSTROOT)$(libdir)/; then \
b75a7d8f A	290	$(INSTALL) -d -m 0775 $(DSTROOT)$(libdir)/; \
374ca955 A	291	fi;
	292	$(INSTALL) -b -m 0664 $(OBJROOT)/$(INSTALLED_DYLIB) $(DSTROOT)$(libdir)$(INSTALLED_DYLIB)
	293	(cd $(DSTROOT)$(libdir); \
	294	ln -fs $(INSTALLED_DYLIB) $(DYLIB));
	295	cp $(OBJROOT)/$(INSTALLED_DYLIB) $(SYMROOT)/$(INSTALLED_DYLIB);
	296	strip -x -u -r -S $(DSTROOT)$(libdir)$(INSTALLED_DYLIB);
b75a7d8f	297	for subdir in $(EXTRA_LIBS); do \
374ca955	298	(cd $(OBJROOT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV) install-library;) \
b75a7d8f A	299	done;
	300	if test ! -d $(DSTROOT)$(datadir)/; then \
	301	$(INSTALL) -d -m 0755 $(DSTROOT)$(datadir)/; \
	302	fi;
374ca955 A	303	if test -f $(OBJROOT)/$(B_DATA_FILE); then \
374ca955 A	304	$(INSTALL) -b -m 0644 $(OBJROOT)/$(B_DATA_FILE) $(DSTROOT)$(datadir)$(B_DATA_FILE); \
b75a7d8f	305	fi;
374ca955 A	306	if test -f $(OBJROOT)/$(L_DATA_FILE); then \
374ca955 A	307	$(INSTALL) -b -m 0644 $(OBJROOT)/$(L_DATA_FILE) $(DSTROOT)$(datadir)$(L_DATA_FILE); \
b75a7d8f	308	fi;
374ca955 A	309	if test ! -d $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; then \
374ca955 A	310	$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; \
b75a7d8f	311	fi;
374ca955 A	312	$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist;
	313	if test ! -d $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; then \
	314	$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; \
b75a7d8f	315	fi;
374ca955	316	$(INSTALL) -b -m 0644 $(SRCROOT)/license.html $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)ICU.html;
b75a7d8f	317
374ca955 A	318	clean :
374ca955 A	319	-rm -rf $(OBJROOT)