aapt will ignore any versioned resource directories over the
specified version (if used). e.g. --max-res-version=6 will
cause layout-land-v7 to be ignored.
aapt will ignore any versioned resource directories over the
specified version (if used). e.g. --max-res-version=6 will
cause layout-land-v7 to be ignored.
aapt will ignore any versioned resource directories over the
specified version (if used). e.g. --max-res-version=6 will
cause layout-land-v7 to be ignored.
* commit '799a5a61d5813be83c4d0814b04c374adfe3a989': (22 commits)
Properly note the current active restore set's token
Do not log AT command traffic by default.
Work on issue # 2778549: Idle FRF72 is awake 18 mins more than ERE27 in 13hr test
TimedEventQueue is apparently important for glitch-free media playback, and so
As Donut (API=4) devices and earlier do not have a Bluetooth API, .apk files
When filling the cache, we always time out waiting for a condition that won't occur.
Respond to changes in throttle policy.
Fix Tethering of multiple downstream ifaces.
Update Framework to support multiple dhpc ranges
Dumb late-night typo.
Use ViewRoot.addConfigCallback instead of a BroadcastReceiver.
Clean up changing AP configuration
Grant permissions to apps on sd when enabling/disabling packages.
Fix issue #2512507: Shortcuts and Widgets lost on upgrading from Eclair to FRE70D
Switch default install location to unspecified.
Fix problem with calling onConfigurationChanged() too much.
Preserve widgets on upgrade.
Need to keep new package's cert when using original-package.
Pick up default install location
Fix 2463886: Allow delayed fetching of DevicePolicyManager in LockPatternUtils.
...
Dan Morrill [Thu, 17 Jun 2010 19:45:53 +0000 (12:45 -0700)]
am dde1ae84: am 45378f07: am 6b22d81a: As Donut (API=4) devices and earlier do not have a Bluetooth API, .apk files that have minSdkLevel (or targetSdkLevel) set to 4 or lower should not be presumed to require Bluetooth just because they take the permission.
Dan Morrill [Thu, 17 Jun 2010 19:36:17 +0000 (12:36 -0700)]
am 6b22d81a: As Donut (API=4) devices and earlier do not have a Bluetooth API, .apk files that have minSdkLevel (or targetSdkLevel) set to 4 or lower should not be presumed to require Bluetooth just because they take the permission.
Dan Morrill [Wed, 16 Jun 2010 04:41:42 +0000 (21:41 -0700)]
As Donut (API=4) devices and earlier do not have a Bluetooth API, .apk files
that have minSdkLevel (or targetSdkLevel) set to 4 or lower should not be
presumed to require Bluetooth just because they take the permission.
Dan Morrill [Wed, 16 Jun 2010 04:41:42 +0000 (21:41 -0700)]
As Donut (API=4) devices and earlier do not have a Bluetooth API, .apk files
that have minSdkLevel (or targetSdkLevel) set to 4 or lower should not be
presumed to require Bluetooth just because they take the permission.
Joe Onorato [Tue, 15 Jun 2010 22:49:05 +0000 (15:49 -0700)]
am 3d6ea3bd: am 9a5fcd1c: am 9d71860e: Merge "The aapt and aidl tools are prebuilt when we\'re doing an apps-only build, so don\'t try to build them." into froyo
Kenny Root [Fri, 28 May 2010 22:44:32 +0000 (15:44 -0700)]
Add error checking for translatable strings
Translatable strings that have multiple substitutions should use
positional String.format() substitutions. This change makes it an error
not to use that format on translatable strings that have more than one
substitution in its text.
Dan Morrill [Wed, 5 May 2010 00:46:13 +0000 (17:46 -0700)]
am 69a07917: am 6a22fb9b: am f7ebcfec: am e17b4e71: Merge "Adding the backward-compatible filtering heuristics for the new device features definitions added in FroYo." into froyo
Dan Morrill [Tue, 4 May 2010 19:45:49 +0000 (12:45 -0700)]
am f7ebcfec: am e17b4e71: Merge "Adding the backward-compatible filtering heuristics for the new device features definitions added in FroYo." into froyo
Not complete, only for experimentation at this point.
This includes a reworking of how screen size configurations are matched,
so that if you are on a larger screen we can select configurations for
smaller screens if there aren't any exactly matching the current screen.
The screen size at which we switch to xlarge has been arbitrarily
chosen; the compatibility behavior has not yet been defined.
Kenny Root [Thu, 18 Mar 2010 21:14:49 +0000 (14:14 -0700)]
Make aapt warning concise
The previous warning made it seem like it could be using the value
specified on the command line, but, in fact, it would ignore the command
line value if it were already specified in the AndroidManifest.xml
Kenny Root [Thu, 18 Mar 2010 19:12:11 +0000 (12:12 -0700)]
Fix minSdkVersion scanning to not throw warnings
For the UTF8/UTF16 switch code, we needed to know what was the
minSdkVersion specified as early as possible. Unfortunately, this threw
warnings when the SDK was compiling since we always set this field in
the Bundle.
This splits out the field used by the initial AndroidManifest.xml scan
to a separate one that we won't attempt to re-insert into the
AndroidManifest.xml This also switches the logic to better reflect the
preference of UTF-8 over UTF-16; previously UTF-16 was the default.
Kenny Root [Fri, 12 Mar 2010 22:12:14 +0000 (14:12 -0800)]
Give an 9-patch error on too many rows and columns
When you have too many rows and columns, there are not enough colors in
the 9-patch private metadata to represent them. Instead of crashing
aapt, this change gives the user an error message telling them why it's
invalid.
Kenny Root [Wed, 10 Mar 2010 00:55:23 +0000 (16:55 -0800)]
Dedupe resource config pointers
When there are two configs in a StringPool that would match a string ID
only keep the more generic entry to save some space. This means that if
you have both "es" and "es_US" translations that have the same
translation, the string entry would be removed from the "es_US" config.
Dianne Hackborn [Tue, 9 Mar 2010 23:00:30 +0000 (15:00 -0800)]
Add ability for some manifest attributes to reference resources.
This loosens our restriction on many manifest attributes requiring
literal string values, to allow various ones to use values from
resources. This is only allowed if the resource value does not change
from configuration changes, and the restriction is still in place
for attributes that are core to security (requesting permissions) or
market operation (used libraries and features etc).
Ed Heyl [Fri, 5 Mar 2010 19:59:58 +0000 (11:59 -0800)]
Merge "Change an aapt "warning" from "*** " to "**** " (from three to four stars). "*** " (three stars and a space) is the 'magic make error string'; so this change makes it easier to find the real issues/errors in build logs. Besides, other aapt messages are "**** "."
Ed Heyl [Fri, 5 Mar 2010 19:08:58 +0000 (11:08 -0800)]
Change an aapt "warning" from "*** " to "**** " (from three to four stars).
"*** " (three stars and a space) is the 'magic make error string'; so this change makes it
easier to find the real issues/errors in build logs. Besides, other aapt messages are "**** ".
Dianne Hackborn [Fri, 5 Mar 2010 02:41:49 +0000 (18:41 -0800)]
Refactor car mode.
Extract all UI behavior from dock observer and ACTION_DOCK_EVENT.
Also introduce a desk type to go along with the car type all through
the resource system, since we now need to have corresponding high-level
broadcasts for desk dock mode. As part of that I also reworked some
of the logic for switching modes to all funnel through a single
update() call that looks all of the current state to decide what to
do next, and fixed various locking issues.
In addition I found there were bugs in the configuration change
handling causing us to only switch into the car mode config and
then never get out of it. Unfortunately now that we are actually
changing the configuration for each mode change, the transitions
between them are really crummy as we restart all kinds of
activities. :(
Dianne Hackborn [Tue, 2 Mar 2010 01:43:39 +0000 (17:43 -0800)]
Fix issue #2448075: aapt doesn't fix up activity-alias android:targetActivity links
And related:
- The aapt tool now sets a resource configurations sdk level to match any configs
that have been set (for example if you specify density your sdk level will be
at least 4).
- New option to modify the targetPackage attribute of instrumentation.
- Clean up of aapt options help.
- Fix of UI type values to leave 0 for "unspecified".
- Make the UI mode config APIs public.
Kenny Root [Thu, 25 Feb 2010 04:00:03 +0000 (20:00 -0800)]
Scan for android namespace in manifest
android:minSdkVersion wasn't being correctly scanned because the
namespace was incorrect. This fixes that problem so packages aren't
generated as UTF-8 when minSdkVersion is less than 7.
Kenny Root [Tue, 23 Feb 2010 06:36:26 +0000 (22:36 -0800)]
Use UTF-8 strings to avoid duplicate caching, part 1
StringBlock instances containing UTF-8 strings use a cache to convert
into UTF-16, but using that cache and then using a JNI call to NewString
causes the UTF-8 string as well as two copies of the UTF-16 string to
be held in memory. Getting the UTF-8 string directly from the StringPool
eliminates one copy of the UTF-16 string being held in memory.
This is part 1. Part 2 will include ResXMLParser optimizations.
Kenny Root [Thu, 18 Feb 2010 16:54:47 +0000 (08:54 -0800)]
Fix enum reference
Was using argument that is set default to NULL as a shortcut to an
enum's value. Change it to reference to class directly to avoid a null
pointer dereference.
Tobias Haamel [Tue, 9 Feb 2010 22:09:17 +0000 (23:09 +0100)]
Introduce special UI modes for night and car usage.
The device mode is now called ui mode. Furthermore is the order of
precedence for the resources now in such a way that the ui mode needs
to be specified after the orientation and before the density.
The ui mode can be set, like it is done for the locale, as follows:
* commit '0af0449301e72a52beeed8f26021e5460004d67a':
android-2.1_r1 snapshot
Use 128p map tiles for high dpi devices.
Throttle nitz updates as the are too numerous on cdma.
don't request a sync when temp providers are created
Increase light sensor delay from one to two seconds.
Revert jparks code from IPCThreadState.
Add a warning when we leave threads in the binder thread pool in the background scheduling group.
PowerManagerService: Ensure that recent changes do not effect the hardware ALS case.
* commit '31bfdf695ef741f64066ef605bd6a7e23df88714':
android-2.1_r1 snapshot
Use 128p map tiles for high dpi devices.
Throttle nitz updates as the are too numerous on cdma.
don't request a sync when temp providers are created
Increase light sensor delay from one to two seconds.
Revert jparks code from IPCThreadState.
Add a warning when we leave threads in the binder thread pool in the background scheduling group.
PowerManagerService: Ensure that recent changes do not effect the hardware ALS case.
Fix regression.
Fix broken build.
Bluetooth A2DP suspend/resume functionality
EventLog when a database file is deleted due to corruption.
Don't forget to clear "backup in progress" state when finishing a pass
Fix issue #2148939: Sholes slow to wake up in landscape mode
Fix Cdma re-start of default connection.
Merge change 26821 into eclair
Not all WebView's host have permission to read the history.
Merge change 26908 into eclair
Kenny Root [Fri, 11 Dec 2009 16:15:16 +0000 (08:15 -0800)]
Revise aapt options for UTF8/16 encoding
Remove option to force UTF-8 encoding which could corrupt packages meant
for systems before API level 7. Added switch to allow encoding for UTF-16
which will allow API 7 and later to encode resources in UTF-16.
Kenny Root [Thu, 10 Dec 2009 21:52:53 +0000 (13:52 -0800)]
Default to UTF8 resources when packaging with aapt
This change makes it so with API level 7 and above all resources will be
packaged in UTF-8 format. Any minSdkVersion level that is named will also
have resources packaged in UTF-8, because it is assumed that previous
releases will only be rebuilt with their proper integer number and only
future releases will temporarily have names.
Kenny Root [Fri, 4 Dec 2009 17:38:48 +0000 (09:38 -0800)]
Optional use of UTF-8 strings in resource bundles
Allows the use of UTF-8 for packing resources instead of the
default of UTF-16 for Java. When strings are extracted from the
ResStringPool, they are converted to UTF-16 and the result is
cached for subsequent calls.
When using aapt to package, add in the "-8" switch to pack the
resources using UTF-8. This will result in the value, key, and
type strings as well as the compiled XML string values taking
significantly less space in the final application package in
most scenarios.
Kenny Root [Fri, 21 Aug 2009 20:23:45 +0000 (15:23 -0500)]
Fix bitmask in aapt's StringPool length construction
The StringPool indicates the length of a string with a 16-bit
integer. If the length of the string is greater than 0x7FFF,
it splits it into two 16-bit integers with the first one
having the high bit set.
The length calculation has a small bug that masks off the
19 bits instead of the first 15 bits as intended.
projects / android / aapt.git / log
