From dbd94b75015561fe527069c138ce43c44797fe35 Mon Sep 17 00:00:00 2001 From: Kevin Hock Date: Fri, 22 Oct 2004 19:15:35 +0000 Subject: [PATCH] *** empty log message *** git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@30072 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775 --- docs/changes.txt | 26 +-- docs/latex/wx/accessible.tex | 326 +++++++++++++++++------------------ docs/latex/wx/array.tex | 2 +- docs/latex/wx/artprov.tex | 4 +- docs/latex/wx/bufferdc.tex | 2 +- docs/latex/wx/button.tex | 2 +- docs/latex/wx/clientdat.tex | 4 +- docs/latex/wx/clipbrd.tex | 2 +- docs/latex/wx/conditn.tex | 4 +- docs/latex/wx/db.tex | 2 +- docs/latex/wx/longlong.tex | 4 +- docs/latex/wx/mouseevt.tex | 4 +- docs/latex/wx/re_syntax.tex | 2 +- docs/latex/wx/region.tex | 2 +- docs/latex/wx/stream.tex | 2 +- docs/latex/wx/strmzlib.tex | 8 +- docs/latex/wx/strtotxt.tex | 2 +- docs/latex/wx/tevent.tex | 2 +- docs/latex/wx/texcept.tex | 2 +- docs/latex/wx/text.tex | 4 +- docs/latex/wx/thread.tex | 2 +- docs/latex/wx/threadh.tex | 2 +- docs/latex/wx/timespan.tex | 10 +- docs/latex/wx/toolbar.tex | 2 +- docs/latex/wx/tprint.tex | 2 +- docs/latex/wx/treeevt.tex | 2 +- docs/latex/wx/tthreads.tex | 6 +- docs/latex/wx/ttips.tex | 2 +- docs/latex/wx/txrc.tex | 4 +- docs/latex/wx/vlbox.tex | 2 +- docs/latex/wx/vscroll.tex | 4 +- docs/latex/wx/window.tex | 12 +- docs/latex/wx/wizard.tex | 2 +- docs/latex/wx/wxstring.tex | 14 +- docs/readme_vms.txt | 4 +- docs/tech/index.txt | 4 +- docs/tech/tn0002.txt | 5 +- docs/tech/tn0014.txt | 18 +- docs/tech/tn0015.txt | 2 +- docs/tech/tn0016.txt | 6 +- docs/toback24.txt | 2 +- docs/todo30.txt | 4 +- 42 files changed, 260 insertions(+), 257 deletions(-) diff --git a/docs/changes.txt b/docs/changes.txt index f134a15a01..203e80717f 100644 --- a/docs/changes.txt +++ b/docs/changes.txt @@ -56,7 +56,7 @@ INCOMPATIBLE CHANGES SINCE 2.4.x size to be used by the sizers. * The best size of a window is cached so it doesn't need to - recaculated on every layout. wxWindow::InvalidateBestSize was + recalculated on every layout. wxWindow::InvalidateBestSize was added and should be called (usually just internally in control methods) whenever something is done that would make the best size change. @@ -130,7 +130,7 @@ INCOMPATIBLE CHANGES SINCE 2.4.x Previously, the application terminated if there were no top level windows; now it terminates if there are no top level windows or taskbar icons left. - wxZlibInputStream is not by default compatible with the output of the - 2.4.x version of wxZlibOutputStream. However, there is a compatibilty mode, + 2.4.x version of wxZlibOutputStream. However, there is a compatibility mode, switched on by passing wxZLIB_24COMPATIBLE to the constructor. - when WXWIN_COMPATIBILITY_2_4 == 0 wxHashTable uses a new implementation not using wxList keyed interface (the same used when wxUSE_STL == 1), @@ -292,7 +292,7 @@ Unix: wxCocoa: -- added Unicode compatability layer for OSX 10.2 +- added Unicode compatibility layer for OSX 10.2 - fixed so that wxCocoa runs in OSX 10.2 - Tooltips now supported - wxSound now supported @@ -303,7 +303,7 @@ wxMac: - fixed MLTE text control GetLineText and GetLineLength on OSX - added OSX wxTaskBarIcon implementation for the OSX Dock -- added Unicode compatability layer for OSX 10.2 +- added Unicode compatibility layer for OSX 10.2 - wxGetKeyState now works with nearly all wx key codes wxGTK: @@ -357,7 +357,7 @@ wxWinCE: - added native WinCE driven smartphone wxTextCtrl implementation using spinners - added native WinCE driven smartphone wxChoice implementation using spinners -- added automatized but customizable handling of native WinCE driven smartphone menus +- added automated but customizable handling of native WinCE driven smartphone menus - fixed wxRadioBox and wxStaticBox wxHTML: @@ -411,7 +411,7 @@ wxMSW: - wxFileName::GetModificationTime() works with opened files too now - wxDC::GetClippingBox() now works even for clipping regions created by Windows - fixed wxFileDataObject in Unicode build (Alex D) -- subdindented paragraphs support (Tim Kosse) +- subindented paragraphs support (Tim Kosse) wxGTK: @@ -554,7 +554,7 @@ wxMac: - use same average character width as other ports when calculating dialog units - implemented handling of mouse wheel - fix for long file names (longer than 32 characters) in file dialogs -- use unix sockets for Mach-o builds +- use Unix sockets for Mach-o builds wxMotif: @@ -638,7 +638,7 @@ All GUI ports: - it is now possible to use several wxFileHistory objects in the same menu by giving them different base IDs (Dimitri Schoolwerth) - Added wxTLW::SetShape with implementations for wxMSW and wxGTK (so far) -- FL: rmoved const from EnableTool parameters +- FL: removed const from EnableTool parameters - FL: signal child window when toolbar is closed - In various places, changed tests for pathsep on last char of string to call wxEndsWithPathSeparator(s) @@ -712,7 +712,7 @@ wxGTK: - added wxTextCtrl::SetSelection implementation for GTK+ 2 - fixed wxTextCtrl::IsEditable() for GTK+ 2 - fixed wxStaticText alignment for GTK+ 2 (Kevin Hock) -- don't consume 100% CPU when showing a poup menu +- don't consume 100% CPU when showing a popup menu wxMac: @@ -736,7 +736,7 @@ wxMSW: - libraries built with makefile.g95 have a _min or _cyg suffix (MinGW/Cygwin) - when using DLL, wxLocalFSHandler was not being exported - fixed problem with wxEvtHandler object not removed from wxPendingEvents -- Windows XP manifest is now included in wx.rc; it is no longer neccessary +- Windows XP manifest is now included in wx.rc; it is no longer necessary to ship .exe.manifest file with applications to support XP themes - wxLocale::Init no longer reports error if trying to set Unicode-only locale or if user's default locale is Unicode-only @@ -936,7 +936,7 @@ wxThread and related classes: ! wxCondition now *must* be used with a mutex, please read the (updated) class documentation for details and revise your code accordingly: this change was unfortunately needed as it was impossible to ensure the correct behaviour - (i.e. absense of race conditions) using the old API. + (i.e. absence of race conditions) using the old API. - wxMutex is not recursive any more in POSIX implementation (it hasn't been recursive in 2.2.x but was in 2.3.1 and 2.3.2), please refer to the class @@ -1086,7 +1086,7 @@ wxMSW: - wxLB_SORT style can be used with wxCheckListBox - wxWindowDC and wxClientDC::GetSize() works correctly now - Added wxTB_NODIVIDER and wxTB_NOALIGN so native toolbar can be used in FL -- Multiline labels in buttons are now supoprted (simply use "\n" in the label) +- Multiline labels in buttons are now supported (simply use "\n" in the label) - Implemented wxMouseCaptureChangedEvent and made wxGenericDragImage check it has the capture before release it. - fixed bugs in multiple selection wxCheckListBox @@ -2231,7 +2231,7 @@ At this point, the following has been achieved: - Toolbar class hierarchy revised: wxToolBarBase wxToolBarSimple (= old wxToolBar) - wxToolBar95 (= old wxButtonBar under Win95 + wxToolBar95 (= old wxButtonBar under Win95) wxToolBarMSW (= old wxButtonBar under WIN16/WIN32) - Constraint system debugged somewhat (sizers now work properly). - wxFileDialog, wxDirDialog added; other common dialogs now diff --git a/docs/latex/wx/accessible.tex b/docs/latex/wx/accessible.tex index 323c90a76f..bfab1874dc 100644 --- a/docs/latex/wx/accessible.tex +++ b/docs/latex/wx/accessible.tex @@ -20,7 +20,7 @@ window using \helpref{wxWindow::SetAccessible}{wxwindowsetaccessible}. All functions return an indication of success, failure, or not implemented using values of the wxAccStatus enum type. -If you return wxACC\_NOT\_IMPLEMENTED from any functioon, the system will try to +If you return wxACC\_NOT\_IMPLEMENTED from any function, the system will try to implement the appropriate functionality. However this will not work with all functions. @@ -52,11 +52,11 @@ may be one of the following: \begin{verbatim} typedef enum { - wxACC\_FAIL, // The function failed - wxACC\_FALSE, // The function returned false - wxACC\_OK, // The function completed successfully - wxACC\_NOT\_IMPLEMENTED, // The function is not implemented - wxACC\_NOT\_SUPPORTED // The function is not supported + wxACC_FAIL, // The function failed + wxACC_FALSE, // The function returned false + wxACC_OK, // The function completed successfully + wxACC_NOT_IMPLEMENTED, // The function is not implemented + wxACC_NOT_SUPPORTED // The function is not supported } wxAccStatus \end{verbatim} } @@ -68,14 +68,14 @@ the following: \begin{verbatim} typedef enum { - wxNAVDIR\_DOWN, - wxNAVDIR\_FIRSTCHILD, - wxNAVDIR\_LASTCHILD, - wxNAVDIR\_LEFT, - wxNAVDIR\_NEXT, - wxNAVDIR\_PREVIOUS, - wxNAVDIR\_RIGHT, - wxNAVDIR\_UP + wxNAVDIR_DOWN, + wxNAVDIR_FIRSTCHILD, + wxNAVDIR_LASTCHILD, + wxNAVDIR_LEFT, + wxNAVDIR_NEXT, + wxNAVDIR_PREVIOUS, + wxNAVDIR_RIGHT, + wxNAVDIR_UP } wxNavDir \end{verbatim} } @@ -86,68 +86,68 @@ by the following type: {\small \begin{verbatim} typedef enum { - wxROLE\_NONE, - wxROLE\_SYSTEM\_ALERT, - wxROLE\_SYSTEM\_ANIMATION, - wxROLE\_SYSTEM\_APPLICATION, - wxROLE\_SYSTEM\_BORDER, - wxROLE\_SYSTEM\_BUTTONDROPDOWN, - wxROLE\_SYSTEM\_BUTTONDROPDOWNGRID, - wxROLE\_SYSTEM\_BUTTONMENU, - wxROLE\_SYSTEM\_CARET, - wxROLE\_SYSTEM\_CELL, - wxROLE\_SYSTEM\_CHARACTER, - wxROLE\_SYSTEM\_CHART, - wxROLE\_SYSTEM\_CHECKBUTTON, - wxROLE\_SYSTEM\_CLIENT, - wxROLE\_SYSTEM\_CLOCK, - wxROLE\_SYSTEM\_COLUMN, - wxROLE\_SYSTEM\_COLUMNHEADER, - wxROLE\_SYSTEM\_COMBOBOX, - wxROLE\_SYSTEM\_CURSOR, - wxROLE\_SYSTEM\_DIAGRAM, - wxROLE\_SYSTEM\_DIAL, - wxROLE\_SYSTEM\_DIALOG, - wxROLE\_SYSTEM\_DOCUMENT, - wxROLE\_SYSTEM\_DROPLIST, - wxROLE\_SYSTEM\_EQUATION, - wxROLE\_SYSTEM\_GRAPHIC, - wxROLE\_SYSTEM\_GRIP, - wxROLE\_SYSTEM\_GROUPING, - wxROLE\_SYSTEM\_HELPBALLOON, - wxROLE\_SYSTEM\_HOTKEYFIELD, - wxROLE\_SYSTEM\_INDICATOR, - wxROLE\_SYSTEM\_LINK, - wxROLE\_SYSTEM\_LIST, - wxROLE\_SYSTEM\_LISTITEM, - wxROLE\_SYSTEM\_MENUBAR, - wxROLE\_SYSTEM\_MENUITEM, - wxROLE\_SYSTEM\_MENUPOPUP, - wxROLE\_SYSTEM\_OUTLINE, - wxROLE\_SYSTEM\_OUTLINEITEM, - wxROLE\_SYSTEM\_PAGETAB, - wxROLE\_SYSTEM\_PAGETABLIST, - wxROLE\_SYSTEM\_PANE, - wxROLE\_SYSTEM\_PROGRESSBAR, - wxROLE\_SYSTEM\_PROPERTYPAGE, - wxROLE\_SYSTEM\_PUSHBUTTON, - wxROLE\_SYSTEM\_RADIOBUTTON, - wxROLE\_SYSTEM\_ROW, - wxROLE\_SYSTEM\_ROWHEADER, - wxROLE\_SYSTEM\_SCROLLBAR, - wxROLE\_SYSTEM\_SEPARATOR, - wxROLE\_SYSTEM\_SLIDER, - wxROLE\_SYSTEM\_SOUND, - wxROLE\_SYSTEM\_SPINBUTTON, - wxROLE\_SYSTEM\_STATICTEXT, - wxROLE\_SYSTEM\_STATUSBAR, - wxROLE\_SYSTEM\_TABLE, - wxROLE\_SYSTEM\_TEXT, - wxROLE\_SYSTEM\_TITLEBAR, - wxROLE\_SYSTEM\_TOOLBAR, - wxROLE\_SYSTEM\_TOOLTIP, - wxROLE\_SYSTEM\_WHITESPACE, - wxROLE\_SYSTEM\_WINDOW + wxROLE_NONE, + wxROLE_SYSTEM_ALERT, + wxROLE_SYSTEM_ANIMATION, + wxROLE_SYSTEM_APPLICATION, + wxROLE_SYSTEM_BORDER, + wxROLE_SYSTEM_BUTTONDROPDOWN, + wxROLE_SYSTEM_BUTTONDROPDOWNGRID, + wxROLE_SYSTEM_BUTTONMENU, + wxROLE_SYSTEM_CARET, + wxROLE_SYSTEM_CELL, + wxROLE_SYSTEM_CHARACTER, + wxROLE_SYSTEM_CHART, + wxROLE_SYSTEM_CHECKBUTTON, + wxROLE_SYSTEM_CLIENT, + wxROLE_SYSTEM_CLOCK, + wxROLE_SYSTEM_COLUMN, + wxROLE_SYSTEM_COLUMNHEADER, + wxROLE_SYSTEM_COMBOBOX, + wxROLE_SYSTEM_CURSOR, + wxROLE_SYSTEM_DIAGRAM, + wxROLE_SYSTEM_DIAL, + wxROLE_SYSTEM_DIALOG, + wxROLE_SYSTEM_DOCUMENT, + wxROLE_SYSTEM_DROPLIST, + wxROLE_SYSTEM_EQUATION, + wxROLE_SYSTEM_GRAPHIC, + wxROLE_SYSTEM_GRIP, + wxROLE_SYSTEM_GROUPING, + wxROLE_SYSTEM_HELPBALLOON, + wxROLE_SYSTEM_HOTKEYFIELD, + wxROLE_SYSTEM_INDICATOR, + wxROLE_SYSTEM_LINK, + wxROLE_SYSTEM_LIST, + wxROLE_SYSTEM_LISTITEM, + wxROLE_SYSTEM_MENUBAR, + wxROLE_SYSTEM_MENUITEM, + wxROLE_SYSTEM_MENUPOPUP, + wxROLE_SYSTEM_OUTLINE, + wxROLE_SYSTEM_OUTLINEITEM, + wxROLE_SYSTEM_PAGETAB, + wxROLE_SYSTEM_PAGETABLIST, + wxROLE_SYSTEM_PANE, + wxROLE_SYSTEM_PROGRESSBAR, + wxROLE_SYSTEM_PROPERTYPAGE, + wxROLE_SYSTEM_PUSHBUTTON, + wxROLE_SYSTEM_RADIOBUTTON, + wxROLE_SYSTEM_ROW, + wxROLE_SYSTEM_ROWHEADER, + wxROLE_SYSTEM_SCROLLBAR, + wxROLE_SYSTEM_SEPARATOR, + wxROLE_SYSTEM_SLIDER, + wxROLE_SYSTEM_SOUND, + wxROLE_SYSTEM_SPINBUTTON, + wxROLE_SYSTEM_STATICTEXT, + wxROLE_SYSTEM_STATUSBAR, + wxROLE_SYSTEM_TABLE, + wxROLE_SYSTEM_TEXT, + wxROLE_SYSTEM_TITLEBAR, + wxROLE_SYSTEM_TOOLBAR, + wxROLE_SYSTEM_TOOLTIP, + wxROLE_SYSTEM_WHITESPACE, + wxROLE_SYSTEM_WINDOW } wxAccRole \end{verbatim} } @@ -157,18 +157,18 @@ Objects are represented by the following type: {\small \begin{verbatim} typedef enum { - wxOBJID\_WINDOW = 0x00000000, - wxOBJID\_SYSMENU = 0xFFFFFFFF, - wxOBJID\_TITLEBAR = 0xFFFFFFFE, - wxOBJID\_MENU = 0xFFFFFFFD, - wxOBJID\_CLIENT = 0xFFFFFFFC, - wxOBJID\_VSCROLL = 0xFFFFFFFB, - wxOBJID\_HSCROLL = 0xFFFFFFFA, - wxOBJID\_SIZEGRIP = 0xFFFFFFF9, - wxOBJID\_CARET = 0xFFFFFFF8, - wxOBJID\_CURSOR = 0xFFFFFFF7, - wxOBJID\_ALERT = 0xFFFFFFF6, - wxOBJID\_SOUND = 0xFFFFFFF5 + wxOBJID_WINDOW = 0x00000000, + wxOBJID_SYSMENU = 0xFFFFFFFF, + wxOBJID_TITLEBAR = 0xFFFFFFFE, + wxOBJID_MENU = 0xFFFFFFFD, + wxOBJID_CLIENT = 0xFFFFFFFC, + wxOBJID_VSCROLL = 0xFFFFFFFB, + wxOBJID_HSCROLL = 0xFFFFFFFA, + wxOBJID_SIZEGRIP = 0xFFFFFFF9, + wxOBJID_CARET = 0xFFFFFFF8, + wxOBJID_CURSOR = 0xFFFFFFF7, + wxOBJID_ALERT = 0xFFFFFFF6, + wxOBJID_SOUND = 0xFFFFFFF5 } wxAccObject \end{verbatim} } @@ -180,12 +180,12 @@ this type: \begin{verbatim} typedef enum { - wxACC\_SEL\_NONE = 0, - wxACC\_SEL\_TAKEFOCUS = 1, - wxACC\_SEL\_TAKESELECTION = 2, - wxACC\_SEL\_EXTENDSELECTION = 4, - wxACC\_SEL\_ADDSELECTION = 8, - wxACC\_SEL\_REMOVESELECTION = 16 + wxACC_SEL_NONE = 0, + wxACC_SEL_TAKEFOCUS = 1, + wxACC_SEL_TAKESELECTION = 2, + wxACC_SEL_EXTENDSELECTION = 4, + wxACC_SEL_ADDSELECTION = 8, + wxACC_SEL_REMOVESELECTION = 16 } wxAccSelectionFlags \end{verbatim} } @@ -194,32 +194,32 @@ States are represented by the following: {\small \begin{verbatim} -#define wxACC\_STATE\_SYSTEM\_ALERT\_HIGH 0x00000001 -#define wxACC\_STATE\_SYSTEM\_ALERT\_MEDIUM 0x00000002 -#define wxACC\_STATE\_SYSTEM\_ALERT\_LOW 0x00000004 -#define wxACC\_STATE\_SYSTEM\_ANIMATED 0x00000008 -#define wxACC\_STATE\_SYSTEM\_BUSY 0x00000010 -#define wxACC\_STATE\_SYSTEM\_CHECKED 0x00000020 -#define wxACC\_STATE\_SYSTEM\_COLLAPSED 0x00000040 -#define wxACC\_STATE\_SYSTEM\_DEFAULT 0x00000080 -#define wxACC\_STATE\_SYSTEM\_EXPANDED 0x00000100 -#define wxACC\_STATE\_SYSTEM\_EXTSELECTABLE 0x00000200 -#define wxACC\_STATE\_SYSTEM\_FLOATING 0x00000400 -#define wxACC\_STATE\_SYSTEM\_FOCUSABLE 0x00000800 -#define wxACC\_STATE\_SYSTEM\_FOCUSED 0x00001000 -#define wxACC\_STATE\_SYSTEM\_HOTTRACKED 0x00002000 -#define wxACC\_STATE\_SYSTEM\_INVISIBLE 0x00004000 -#define wxACC\_STATE\_SYSTEM\_MARQUEED 0x00008000 -#define wxACC\_STATE\_SYSTEM\_MIXED 0x00010000 -#define wxACC\_STATE\_SYSTEM\_MULTISELECTABLE 0x00020000 -#define wxACC\_STATE\_SYSTEM\_OFFSCREEN 0x00040000 -#define wxACC\_STATE\_SYSTEM\_PRESSED 0x00080000 -#define wxACC\_STATE\_SYSTEM\_PROTECTED 0x00100000 -#define wxACC\_STATE\_SYSTEM\_READONLY 0x00200000 -#define wxACC\_STATE\_SYSTEM\_SELECTABLE 0x00400000 -#define wxACC\_STATE\_SYSTEM\_SELECTED 0x00800000 -#define wxACC\_STATE\_SYSTEM\_SELFVOICING 0x01000000 -#define wxACC\_STATE\_SYSTEM\_UNAVAILABLE 0x02000000 +#define wxACC_STATE_SYSTEM_ALERT_HIGH 0x00000001 +#define wxACC_STATE_SYSTEM_ALERT_MEDIUM 0x00000002 +#define wxACC_STATE_SYSTEM_ALERT_LOW 0x00000004 +#define wxACC_STATE_SYSTEM_ANIMATED 0x00000008 +#define wxACC_STATE_SYSTEM_BUSY 0x00000010 +#define wxACC_STATE_SYSTEM_CHECKED 0x00000020 +#define wxACC_STATE_SYSTEM_COLLAPSED 0x00000040 +#define wxACC_STATE_SYSTEM_DEFAULT 0x00000080 +#define wxACC_STATE_SYSTEM_EXPANDED 0x00000100 +#define wxACC_STATE_SYSTEM_EXTSELECTABLE 0x00000200 +#define wxACC_STATE_SYSTEM_FLOATING 0x00000400 +#define wxACC_STATE_SYSTEM_FOCUSABLE 0x00000800 +#define wxACC_STATE_SYSTEM_FOCUSED 0x00001000 +#define wxACC_STATE_SYSTEM_HOTTRACKED 0x00002000 +#define wxACC_STATE_SYSTEM_INVISIBLE 0x00004000 +#define wxACC_STATE_SYSTEM_MARQUEED 0x00008000 +#define wxACC_STATE_SYSTEM_MIXED 0x00010000 +#define wxACC_STATE_SYSTEM_MULTISELECTABLE 0x00020000 +#define wxACC_STATE_SYSTEM_OFFSCREEN 0x00040000 +#define wxACC_STATE_SYSTEM_PRESSED 0x00080000 +#define wxACC_STATE_SYSTEM_PROTECTED 0x00100000 +#define wxACC_STATE_SYSTEM_READONLY 0x00200000 +#define wxACC_STATE_SYSTEM_SELECTABLE 0x00400000 +#define wxACC_STATE_SYSTEM_SELECTED 0x00800000 +#define wxACC_STATE_SYSTEM_SELFVOICING 0x01000000 +#define wxACC_STATE_SYSTEM_UNAVAILABLE 0x02000000 \end{verbatim} } @@ -228,48 +228,48 @@ as follows: {\small \begin{verbatim} -#define wxACC\_EVENT\_SYSTEM\_SOUND 0x0001 -#define wxACC\_EVENT\_SYSTEM\_ALERT 0x0002 -#define wxACC\_EVENT\_SYSTEM\_FOREGROUND 0x0003 -#define wxACC\_EVENT\_SYSTEM\_MENUSTART 0x0004 -#define wxACC\_EVENT\_SYSTEM\_MENUEND 0x0005 -#define wxACC\_EVENT\_SYSTEM\_MENUPOPUPSTART 0x0006 -#define wxACC\_EVENT\_SYSTEM\_MENUPOPUPEND 0x0007 -#define wxACC\_EVENT\_SYSTEM\_CAPTURESTART 0x0008 -#define wxACC\_EVENT\_SYSTEM\_CAPTUREEND 0x0009 -#define wxACC\_EVENT\_SYSTEM\_MOVESIZESTART 0x000A -#define wxACC\_EVENT\_SYSTEM\_MOVESIZEEND 0x000B -#define wxACC\_EVENT\_SYSTEM\_CONTEXTHELPSTART 0x000C -#define wxACC\_EVENT\_SYSTEM\_CONTEXTHELPEND 0x000D -#define wxACC\_EVENT\_SYSTEM\_DRAGDROPSTART 0x000E -#define wxACC\_EVENT\_SYSTEM\_DRAGDROPEND 0x000F -#define wxACC\_EVENT\_SYSTEM\_DIALOGSTART 0x0010 -#define wxACC\_EVENT\_SYSTEM\_DIALOGEND 0x0011 -#define wxACC\_EVENT\_SYSTEM\_SCROLLINGSTART 0x0012 -#define wxACC\_EVENT\_SYSTEM\_SCROLLINGEND 0x0013 -#define wxACC\_EVENT\_SYSTEM\_SWITCHSTART 0x0014 -#define wxACC\_EVENT\_SYSTEM\_SWITCHEND 0x0015 -#define wxACC\_EVENT\_SYSTEM\_MINIMIZESTART 0x0016 -#define wxACC\_EVENT\_SYSTEM\_MINIMIZEEND 0x0017 -#define wxACC\_EVENT\_OBJECT\_CREATE 0x8000 -#define wxACC\_EVENT\_OBJECT\_DESTROY 0x8001 -#define wxACC\_EVENT\_OBJECT\_SHOW 0x8002 -#define wxACC\_EVENT\_OBJECT\_HIDE 0x8003 -#define wxACC\_EVENT\_OBJECT\_REORDER 0x8004 -#define wxACC\_EVENT\_OBJECT\_FOCUS 0x8005 -#define wxACC\_EVENT\_OBJECT\_SELECTION 0x8006 -#define wxACC\_EVENT\_OBJECT\_SELECTIONADD 0x8007 -#define wxACC\_EVENT\_OBJECT\_SELECTIONREMOVE 0x8008 -#define wxACC\_EVENT\_OBJECT\_SELECTIONWITHIN 0x8009 -#define wxACC\_EVENT\_OBJECT\_STATECHANGE 0x800A -#define wxACC\_EVENT\_OBJECT\_LOCATIONCHANGE 0x800B -#define wxACC\_EVENT\_OBJECT\_NAMECHANGE 0x800C -#define wxACC\_EVENT\_OBJECT\_DESCRIPTIONCHANGE 0x800D -#define wxACC\_EVENT\_OBJECT\_VALUECHANGE 0x800E -#define wxACC\_EVENT\_OBJECT\_PARENTCHANGE 0x800F -#define wxACC\_EVENT\_OBJECT\_HELPCHANGE 0x8010 -#define wxACC\_EVENT\_OBJECT\_DEFACTIONCHANGE 0x8011 -#define wxACC\_EVENT\_OBJECT\_ACCELERATORCHANGE 0x8012 +#define wxACC_EVENT_SYSTEM_SOUND 0x0001 +#define wxACC_EVENT_SYSTEM_ALERT 0x0002 +#define wxACC_EVENT_SYSTEM_FOREGROUND 0x0003 +#define wxACC_EVENT_SYSTEM_MENUSTART 0x0004 +#define wxACC_EVENT_SYSTEM_MENUEND 0x0005 +#define wxACC_EVENT_SYSTEM_MENUPOPUPSTART 0x0006 +#define wxACC_EVENT_SYSTEM_MENUPOPUPEND 0x0007 +#define wxACC_EVENT_SYSTEM_CAPTURESTART 0x0008 +#define wxACC_EVENT_SYSTEM_CAPTUREEND 0x0009 +#define wxACC_EVENT_SYSTEM_MOVESIZESTART 0x000A +#define wxACC_EVENT_SYSTEM_MOVESIZEEND 0x000B +#define wxACC_EVENT_SYSTEM_CONTEXTHELPSTART 0x000C +#define wxACC_EVENT_SYSTEM_CONTEXTHELPEND 0x000D +#define wxACC_EVENT_SYSTEM_DRAGDROPSTART 0x000E +#define wxACC_EVENT_SYSTEM_DRAGDROPEND 0x000F +#define wxACC_EVENT_SYSTEM_DIALOGSTART 0x0010 +#define wxACC_EVENT_SYSTEM_DIALOGEND 0x0011 +#define wxACC_EVENT_SYSTEM_SCROLLINGSTART 0x0012 +#define wxACC_EVENT_SYSTEM_SCROLLINGEND 0x0013 +#define wxACC_EVENT_SYSTEM_SWITCHSTART 0x0014 +#define wxACC_EVENT_SYSTEM_SWITCHEND 0x0015 +#define wxACC_EVENT_SYSTEM_MINIMIZESTART 0x0016 +#define wxACC_EVENT_SYSTEM_MINIMIZEEND 0x0017 +#define wxACC_EVENT_OBJECT_CREATE 0x8000 +#define wxACC_EVENT_OBJECT_DESTROY 0x8001 +#define wxACC_EVENT_OBJECT_SHOW 0x8002 +#define wxACC_EVENT_OBJECT_HIDE 0x8003 +#define wxACC_EVENT_OBJECT_REORDER 0x8004 +#define wxACC_EVENT_OBJECT_FOCUS 0x8005 +#define wxACC_EVENT_OBJECT_SELECTION 0x8006 +#define wxACC_EVENT_OBJECT_SELECTIONADD 0x8007 +#define wxACC_EVENT_OBJECT_SELECTIONREMOVE 0x8008 +#define wxACC_EVENT_OBJECT_SELECTIONWITHIN 0x8009 +#define wxACC_EVENT_OBJECT_STATECHANGE 0x800A +#define wxACC_EVENT_OBJECT_LOCATIONCHANGE 0x800B +#define wxACC_EVENT_OBJECT_NAMECHANGE 0x800C +#define wxACC_EVENT_OBJECT_DESCRIPTIONCHANGE 0x800D +#define wxACC_EVENT_OBJECT_VALUECHANGE 0x800E +#define wxACC_EVENT_OBJECT_PARENTCHANGE 0x800F +#define wxACC_EVENT_OBJECT_HELPCHANGE 0x8010 +#define wxACC_EVENT_OBJECT_DEFACTIONCHANGE 0x8011 +#define wxACC_EVENT_OBJECT_ACCELERATORCHANGE 0x8012 \end{verbatim} } @@ -426,7 +426,7 @@ Navigates from {\it fromId} to {\it toId}/{\it toObject}. \membersection{wxAccessible::NotifyEvent}\label{wxaccessiblenotifyevent} -\func{virtual static void}{NotifyEvent}{\param{int}{ eventType}, \param{wxWindow* }{window}, \param{wxAccObjectt }{objectType}, \param{int }{objectType}} +\func{virtual static void}{NotifyEvent}{\param{int}{ eventType}, \param{wxWindow* }{window}, \param{wxAccObject }{objectType}, \param{int }{objectType}} Allows the application to send an event when something changes in an accessible object. diff --git a/docs/latex/wx/array.tex b/docs/latex/wx/array.tex index a3da99e682..3e806ad938 100644 --- a/docs/latex/wx/array.tex +++ b/docs/latex/wx/array.tex @@ -633,7 +633,7 @@ elements of a wxArray (supposed to contain pointers). \func{void}{SetCount}{\param{size\_t }{count}, \param{T }{defval = T($0$)}} This function ensures that the number of array elements is at least -{\it count}. If the array has already {\it count} or mroe items, nothing is +{\it count}. If the array has already {\it count} or more items, nothing is done. Otherwise, {\tt count - GetCount()} elements are added and initialized to the value {\it defval}. diff --git a/docs/latex/wx/artprov.tex b/docs/latex/wx/artprov.tex index 6e48e3b6e2..109ae25880 100644 --- a/docs/latex/wx/artprov.tex +++ b/docs/latex/wx/artprov.tex @@ -132,7 +132,7 @@ See the \helpref{artprov}{sampleartprovider} sample for an example of wxArtProvi Derived art provider classes must override this method to create requested art resource. Note that returned bitmaps are cached by wxArtProvider and it is therefore -not neccessary to optimize CreateBitmap for speed (e.g. you may create wxBitmap objects +not necessary to optimize CreateBitmap for speed (e.g. you may create wxBitmap objects from XPMs here). \wxheading{Parameters} @@ -142,7 +142,7 @@ from XPMs here). \docparam{client}{wxArtClient identifier of the client (i.e. who is asking for the bitmap). This only servers as a hint.} -\docparam{size}{Prefered size of the bitmap. The function may return a bitmap of different +\docparam{size}{Preferred size of the bitmap. The function may return a bitmap of different dimensions, it will be automatically rescaled to meet client's request.} \wxheading{Note} diff --git a/docs/latex/wx/bufferdc.tex b/docs/latex/wx/bufferdc.tex index 817fce0a1e..31058d7500 100644 --- a/docs/latex/wx/bufferdc.tex +++ b/docs/latex/wx/bufferdc.tex @@ -59,7 +59,7 @@ flushed to this DC when this object is destroyed. You may pass NULL in order to just initialize the buffer, and not flush it.} \docparam{area}{The size of the bitmap to be used for buffering (this bitmap is -created internally when it is not given explicitely).} +created internally when it is not given explicitly).} \docparam{buffer}{Explicitly provided bitmap to be used for buffering: this is the most efficient solution as the bitmap doesn't have to be recreated each diff --git a/docs/latex/wx/button.tex b/docs/latex/wx/button.tex index acd78acdbf..be358e9881 100644 --- a/docs/latex/wx/button.tex +++ b/docs/latex/wx/button.tex @@ -58,7 +58,7 @@ Constructor, creating and showing a button. The preferred way to create standard buttons is to use default value of \arg{label}. If no label is supplied and \arg{id} is one of standard IDs from -\helpref{this list}{stockitems}, standard label will be used. In additon to +\helpref{this list}{stockitems}, standard label will be used. In addition to that, the button will be decorated with stock icons under GTK+ 2. \wxheading{Parameters} diff --git a/docs/latex/wx/clientdat.tex b/docs/latex/wx/clientdat.tex index f4aa0673e5..c4e37c629f 100644 --- a/docs/latex/wx/clientdat.tex +++ b/docs/latex/wx/clientdat.tex @@ -8,7 +8,7 @@ shadow objects for most of wxWidgets' classes and which store a handle to such a shadow class as client data in that class. This data can either be of type void - in which case the data {\it container} does not take care of freeing the data again -or it is of type wxClientData or its derivates. In that case the +or it is of type wxClientData or its derivatives. In that case the container (e.g. a control) will free the memory itself later. Note that you {\it must not} assign both void data and data derived from the wxClientData class to a container. @@ -52,7 +52,7 @@ Virtual destructor. This class is a mixin that provides storage and management of "client data." This data can either be of type void - in which case the data {\it container} does not take care of freeing the data again -or it is of type wxClientData or its derivates. In that case the +or it is of type wxClientData or its derivatives. In that case the container will free the memory itself later. Note that you {\it must not} assign both void data and data derived from the wxClientData class to a container. diff --git a/docs/latex/wx/clipbrd.tex b/docs/latex/wx/clipbrd.tex index 8ed7fef907..603e28b52e 100644 --- a/docs/latex/wx/clipbrd.tex +++ b/docs/latex/wx/clipbrd.tex @@ -97,7 +97,7 @@ Call this function to close the clipboard, having opened it with \helpref{wxClip Flushes the clipboard: this means that the data which is currently on clipboard will stay available even after the application exits (possibly eating memory), otherwise the clipboard will be emptied on exit. -Returns false if the operation is unsuccesful for any reason. +Returns false if the operation is unsuccessful for any reason. \membersection{wxClipboard::GetData}\label{wxclipboardgetdata} diff --git a/docs/latex/wx/conditn.tex b/docs/latex/wx/conditn.tex index c14e7e5f6f..2549e477f6 100644 --- a/docs/latex/wx/conditn.tex +++ b/docs/latex/wx/conditn.tex @@ -119,7 +119,7 @@ Default and only constructor. The {\it mutex} must be locked by the caller before calling \helpref{Wait}{wxconditionwait} function. Use \helpref{IsOk}{wxconditionisok} to check if the object was successfully -intiialized. +initialized. \membersection{wxCondition::\destruct{wxCondition}}\label{wxconditiondtor} @@ -205,6 +205,6 @@ timeout expires. \wxheading{Return value} Returns {\tt wxCOND\_NO\_ERROR} if the condition was signalled, -{\tt wxCOND\_TIMEOUT} if the timeout elapsed ebfore this happened or another +{\tt wxCOND\_TIMEOUT} if the timeout elapsed before this happened or another error code from wxCondError enum. diff --git a/docs/latex/wx/db.tex b/docs/latex/wx/db.tex index de0f0fbee4..6b6de80bbe 100644 --- a/docs/latex/wx/db.tex +++ b/docs/latex/wx/db.tex @@ -319,7 +319,7 @@ This function is used to request a "new" wxDb instance for use by the program. The wxDb instance returned is also opened (see \helpref{wxDb::Open}{wxdbopen}). This function (along with wxDbFreeConnection() and wxDbCloseConnection()) -maintain a cached of wxDb instances for user/re-use by a program. When a +maintain a cache of wxDb instances for user/re-use by a program. When a program needs a wxDb instance, it may call this function to obtain a wxDb instance. If there is a wxDb instance in the cache that is currently unused that matches the connection requirements specified in {\it'pDbConfig'} then diff --git a/docs/latex/wx/longlong.tex b/docs/latex/wx/longlong.tex index 7622c9c58c..ef736a0897 100644 --- a/docs/latex/wx/longlong.tex +++ b/docs/latex/wx/longlong.tex @@ -150,13 +150,13 @@ Returns the value of this wxLongLong with opposite sign. Not in wxULongLong. \constfunc{wxLongLong}{operator$-$}{\param{const wxLongLong\& }{ll}} -Substracts 2 wxLongLongs and returns the result. +Subtracts 2 wxLongLongs and returns the result. \membersection{wxLongLong::operator$-=$}\label{wxlonglongoperatorminusassign} \func{wxLongLong\&}{operator-}{\param{const wxLongLong\& }{ll}} -Substracts another wxLongLong from this one. +Subtracts another wxLongLong from this one. \membersection{wxLongLong::operator$--$}\label{wxlonglongoperatordec} diff --git a/docs/latex/wx/mouseevt.tex b/docs/latex/wx/mouseevt.tex index 757207ce3e..d92074c24d 100644 --- a/docs/latex/wx/mouseevt.tex +++ b/docs/latex/wx/mouseevt.tex @@ -192,8 +192,8 @@ values of {\it button} are: \begin{twocollist}\itemsep=0pt \twocolitem{{\tt wxMOUSE\_BTN\_LEFT}}{check if left button was pressed} -\twocolitem{{\tt wxMOUSE\_BTN\_MIDDLE}}{check if left button was pressed} -\twocolitem{{\tt wxMOUSE\_BTN\_RIGHT}}{check if left button was pressed} +\twocolitem{{\tt wxMOUSE\_BTN\_MIDDLE}}{check if middle button was pressed} +\twocolitem{{\tt wxMOUSE\_BTN\_RIGHT}}{check if right button was pressed} \twocolitem{{\tt wxMOUSE\_BTN\_ANY}}{check if any button was pressed} \end{twocollist} diff --git a/docs/latex/wx/re_syntax.tex b/docs/latex/wx/re_syntax.tex index 75c4d3c5a5..7e5ca974c7 100644 --- a/docs/latex/wx/re_syntax.tex +++ b/docs/latex/wx/re_syntax.tex @@ -1,5 +1,5 @@ % manual page source format generated by PolyglotMan v3.0.9, -% available via anonymous ftp from ftp.cs.berkeley.edu:/ucb/people/phelps/tcltk/rman.tar.Z +% available from http://polyglotman.sourceforge.net/ \section{Syntax of the builtin regular expression library}\label{wxresyn} diff --git a/docs/latex/wx/region.tex b/docs/latex/wx/region.tex index 9cb327a86c..61f88b0b8c 100644 --- a/docs/latex/wx/region.tex +++ b/docs/latex/wx/region.tex @@ -141,7 +141,7 @@ is stored in this region. Returns {\tt true} if the region is empty, {\tt false} otherwise. -\membersection{wxRegion::Subtract}\label{wxregionsubstract} +\membersection{wxRegion::Subtract}\label{wxregionsubtract} \func{bool}{Subtract}{\param{const wxRect\&}{ rect}} diff --git a/docs/latex/wx/stream.tex b/docs/latex/wx/stream.tex index 6d94bdeca1..c48821a94f 100644 --- a/docs/latex/wx/stream.tex +++ b/docs/latex/wx/stream.tex @@ -257,7 +257,7 @@ Sets the current position (in bytes) in the stream buffer. \wxheading{Warning} Since it is a very low-level function, there is no check on the position: -specifing an invalid position can induce unexpected results. +specifying an invalid position can induce unexpected results. \membersection{wxStreamBuffer::GetLastAccess}\label{wxstreambuffergetlastaccess} diff --git a/docs/latex/wx/strmzlib.tex b/docs/latex/wx/strmzlib.tex index e7bd7b6d47..722011a33a 100644 --- a/docs/latex/wx/strmzlib.tex +++ b/docs/latex/wx/strmzlib.tex @@ -5,7 +5,7 @@ This filter stream decompresses a stream that is in zlib or gzip format. Note that reading the gzip format requires zlib version 1.2.1 or greater, -(the builtin version does support gzips). +(the builtin version does support gzip format). The stream is not seekable, \helpref{SeekI()}{wxinputstreamseeki} returns {\it wxInvalidOffset}. Also \helpref{GetSize()}{wxstreambasegetsize} is @@ -42,8 +42,8 @@ deflate stream embedded in a higher level protocol. %if WXWIN_COMPATIBILITY_2_4 This version is not by default compatible with the output produced by the version of {\it wxZlibOutputStream} in wxWidgets 2.4.x. However, -there is a compatibilty mode, which is switched on by passing -wxZLIB\_24COMPATIBLE for flags. Note that in when operating in compatibilty +there is a compatibility mode, which is switched on by passing +wxZLIB\_24COMPATIBLE for flags. Note that in when operating in compatibility mode error checking is very much reduced. %endif @@ -76,7 +76,7 @@ Returns true if zlib library in use can handle gzip compressed data. This stream compresses all data written to it. The compressed output can be in zlib or gzip format. Note that writing the gzip format requires zlib version 1.2.1 or greater -(the builtin version does support gzips). +(the builtin version does support gzip format). The stream is not seekable, \helpref{SeekO()}{wxoutputstreamseeko} returns {\it wxInvalidOffset}. diff --git a/docs/latex/wx/strtotxt.tex b/docs/latex/wx/strtotxt.tex index 9663387cd8..eb84cf91cb 100644 --- a/docs/latex/wx/strtotxt.tex +++ b/docs/latex/wx/strtotxt.tex @@ -34,7 +34,7 @@ Example of usage: cout << "Hello, text!" << endl; } - // this goes soemwhere else, presumably to stdout + // this goes somewhere else, presumably to stdout cout << "Hello, console!" << endl; \end{verbatim} }% diff --git a/docs/latex/wx/tevent.tex b/docs/latex/wx/tevent.tex index 598878746f..ea368dd84f 100644 --- a/docs/latex/wx/tevent.tex +++ b/docs/latex/wx/tevent.tex @@ -189,7 +189,7 @@ be the only events you wish to redirect), you may use instead of using the slower run-time type system. As mentioned above, only command events are recursively applied to the parents event -handler in the libary itself. As this quite often causes confusion for users, +handler in the library itself. As this quite often causes confusion for users, here is a list of system events which will NOT get sent to the parent's event handler: \begin{twocollist}\itemsep=0pt diff --git a/docs/latex/wx/texcept.tex b/docs/latex/wx/texcept.tex index 8c5e8fe771..d7bf87a531 100644 --- a/docs/latex/wx/texcept.tex +++ b/docs/latex/wx/texcept.tex @@ -14,7 +14,7 @@ \subsection{Introduction}\label{exceptionintroduction} wxWidgets had been started long before the exceptions were introduced in C++ so -it is not very surprizing that it is not built around using them as some more +it is not very surprising that it is not built around using them as some more modern C++ libraries are. For instance, the library doesn't throw exceptions to signal about the errors. Moreover, up to (and including) the version 2.4 of wxWidgets, even using the exceptions in the user code was dangerous because the diff --git a/docs/latex/wx/text.tex b/docs/latex/wx/text.tex index caa9d89b32..004d123f41 100644 --- a/docs/latex/wx/text.tex +++ b/docs/latex/wx/text.tex @@ -23,7 +23,7 @@ No base class control. \texttt{wxTextCoord} contains the index of a column or a row in the control. -Note that alghough both of these types should probably have been unsigned, due +Note that although both of these types should probably have been unsigned, due to backwards compatibility reasons, are defined as \texttt{long} currently. Their use (instead of plain \texttt{long}) is still encouraged as it makes the code more readable. @@ -1143,7 +1143,7 @@ in the control is selected. \func{bool}{SetStyle}{\param{long }{start}, \param{long }{end}, \param{const wxTextAttr\& }{style}} Changes the style of the given range. If any attribute within {\it style} is -not set, the correspondign attribute from \helpref{GetDefaultStyle()}{wxtextctrlgetdefaultstyle} is used. +not set, the corresponding attribute from \helpref{GetDefaultStyle()}{wxtextctrlgetdefaultstyle} is used. \wxheading{Parameters} diff --git a/docs/latex/wx/thread.tex b/docs/latex/wx/thread.tex index 8bac6f84bd..4cf259e208 100644 --- a/docs/latex/wx/thread.tex +++ b/docs/latex/wx/thread.tex @@ -203,7 +203,7 @@ The following priorities are defined: Returns \true if the thread is alive (i.e. started and not terminating). -Note that this function can only be saely used with joinable threads, not +Note that this function can only be safely used with joinable threads, not detached ones as the latter delete themselves and so when the real thread is not alive any longer it is not possible to call this function neither because the wxThread object doesn't exist any more as well. diff --git a/docs/latex/wx/threadh.tex b/docs/latex/wx/threadh.tex index 7dc2da77dc..a6eb570eae 100644 --- a/docs/latex/wx/threadh.tex +++ b/docs/latex/wx/threadh.tex @@ -16,7 +16,7 @@ Ordinarily, a \helpref{wxThread}{wxthread} derived object would be created with the calculation code implemented in \helpref{wxThread::Entry}{wxthreadentry}. To access the inputs to the calculation, the frame object would often to pass a pointer to itself to the -thread object. Similiarly, the frame object would hold a pointer to the +thread object. Similarly, the frame object would hold a pointer to the thread object. Shared data and synchronization objects could be stored in either object though the object without the data would have to access the data through a pointer. diff --git a/docs/latex/wx/timespan.tex b/docs/latex/wx/timespan.tex index dc8b84ee0e..a24ef1713c 100644 --- a/docs/latex/wx/timespan.tex +++ b/docs/latex/wx/timespan.tex @@ -57,7 +57,7 @@ No base class \membersection{Operations}\label{timespanoperations} \helpref{Add}{wxtimespanadd}\\ -\helpref{Substract}{wxtimespansubstract}\\ +\helpref{Subtract}{wxtimespansubtract}\\ \helpref{Multiply}{wxtimespanmultiply}\\ \helpref{Negate}{wxtimespannegate}\\ \helpref{Neg}{wxtimespanneg}\\ @@ -264,7 +264,7 @@ Multiplies timespan by a scalar. \constfunc{wxTimeSpan}{Negate}{\void} -Returns timespan with inversed sign. +Returns timespan with inverted sign. \membersection{wxTimeSpan::Neg}\label{wxtimespanneg} @@ -286,11 +286,11 @@ Returns the timespan for the given number of seconds. Returns the timespan for one second. -\membersection{wxTimeSpan::Substract}\label{wxtimespansubstract} +\membersection{wxTimeSpan::Subtract}\label{wxtimespansubtract} -\constfunc{wxTimeSpan}{Substract}{\param{const wxTimeSpan\&}{diff}} +\constfunc{wxTimeSpan}{Subtract}{\param{const wxTimeSpan\&}{diff}} -\func{wxTimeSpan\&}{Substract}{\param{const wxTimeSpan\& }{diff}} +\func{wxTimeSpan\&}{Subtract}{\param{const wxTimeSpan\& }{diff}} \func{wxTimeSpan\&}{operator$-=$}{\param{const wxTimeSpan\&}{diff}} diff --git a/docs/latex/wx/toolbar.tex b/docs/latex/wx/toolbar.tex index 512ac336b1..974007cf09 100644 --- a/docs/latex/wx/toolbar.tex +++ b/docs/latex/wx/toolbar.tex @@ -58,7 +58,7 @@ use: wxSystemOptions::SetOption(wxT("msw.remap"), 2); \end{verbatim} -then colour remapping is switched of, and a transparent background used. But only +then colour remapping is switched off, and a transparent background used. But only use this option under Windows XP with true colour: \begin{verbatim} diff --git a/docs/latex/wx/tprint.tex b/docs/latex/wx/tprint.tex index df5a703f3e..8c5c774e71 100644 --- a/docs/latex/wx/tprint.tex +++ b/docs/latex/wx/tprint.tex @@ -45,7 +45,7 @@ please look at the printout sample code. { // Pass two printout objects: for preview, and possible printing. wxPrintPreview *preview = new wxPrintPreview(new MyPrintout, new MyPrintout); - wxPreviewFrame *frame = new wxPreviewFrame(preview, this, "Demo Print Preview", 100, 100, 600, 650); + wxPreviewFrame *frame = new wxPreviewFrame(preview, this, "Demo Print Preview", wxPoint(100, 100), wxSize(600, 650)); frame->Centre(wxBOTH); frame->Initialize(); frame->Show(true); diff --git a/docs/latex/wx/treeevt.tex b/docs/latex/wx/treeevt.tex index 7baceed277..3b325f2d85 100644 --- a/docs/latex/wx/treeevt.tex +++ b/docs/latex/wx/treeevt.tex @@ -26,7 +26,7 @@ functions that take a wxTreeEvent argument. \twocolitem{{\bf EVT\_TREE\_END\_DRAG(id, func)}}{The user has released the mouse after dragging an item.} \twocolitem{{\bf EVT\_TREE\_END\_LABEL\_EDIT(id, func)}}{The user has finished editing a label. This can be prevented by calling \helpref{Veto()}{wxnotifyeventveto}.} \twocolitem{{\bf EVT\_TREE\_DELETE\_ITEM(id, func)}}{A tree item has been deleted.} -% thy're not very (or at all) useful currently +% they're not very (or at all) useful currently %\twocolitem{{\bf EVT\_TREE\_GET\_INFO(id, func)}}{Request information from the application.} %\twocolitem{{\bf EVT\_TREE\_SET\_INFO(id, func)}}{Information is being supplied.} \twocolitem{{\bf EVT\_TREE\_ITEM\_ACTIVATED(id, func)}}{An item has been activated (e.g. double clicked).} diff --git a/docs/latex/wx/tthreads.tex b/docs/latex/wx/tthreads.tex index c06ddbc3c4..29b0eb9e25 100644 --- a/docs/latex/wx/tthreads.tex +++ b/docs/latex/wx/tthreads.tex @@ -38,14 +38,14 @@ more robust and will undoubtedly save you countless problems (example: under Win32 a thread can only access GDI objects such as pens, brushes, \&c created by itself and not by the other threads). -For communication between secondar threads and the main thread, use may use +For communication between secondary threads and the main thread, you may use \helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent} or its short version \helpref{wxPostEvent}{wxpostevent}. These functions have thread safe implementation so that they can be used as they are for -sending event from one thread to another. However there is no built in method +sending events from one thread to another. However there is no built in method to send messages to the worker threads and you will need to use the available synchronization classes to implement the solution which suits your needs -yourself. In particular, please notice that it is \emph{not} enough to derive +yourself. In particular, please note that it is \emph{not} enough to derive your class from \helpref{wxThread}{wxthread} and \helpref{wxEvtHandler}{wxevthandler} to send messages to it: in fact, this does \emph{not} work at all. diff --git a/docs/latex/wx/ttips.tex b/docs/latex/wx/ttips.tex index 652639f961..5ccde7a4f9 100644 --- a/docs/latex/wx/ttips.tex +++ b/docs/latex/wx/ttips.tex @@ -57,7 +57,7 @@ _("This is my second tip") Now add your tips.txt file into the list of files that gettext searches for translatable strings. The tips will thus get included into your generated .po file catalog and be translated at runtime along with the rest of -your aplication's translatable strings. +your application's translatable strings. Note1: Each line in the tips.txt file needs to strictly begin with exactly the 3 characters of underscore-parenthesis-doublequote, and end with doublequote-parenthesis, as shown above. diff --git a/docs/latex/wx/txrc.tex b/docs/latex/wx/txrc.tex index 11e6ef7eaa..bcd96e148d 100644 --- a/docs/latex/wx/txrc.tex +++ b/docs/latex/wx/txrc.tex @@ -95,7 +95,7 @@ For example: \wxheading{Note} -XRS file is esentially a renamed ZIP archive which means that you can manipulate +XRS file is essentially a renamed ZIP archive which means that you can manipulate it with standard ZIP tools. Note that if you are using XRS files, you have to initialize \helpref{wxFileSystem}{wxfilesystem} ZIP handler first! It is a simple thing to do: @@ -424,7 +424,7 @@ containing class definitions for the GUI windows defined in the XRC file. This code generation can make it easier to use XRC and automate program development. The classes can be used as basis for development, freeing the -programmer from dealing with most of the XRC specifities (e.g. {\tt XRCCTRL}). +programmer from dealing with most of the XRC specifics (e.g. {\tt XRCCTRL}). For each top level window defined in the XRC file a C++ class definition is generated, containing as class members the named widgets of the window. diff --git a/docs/latex/wx/vlbox.tex b/docs/latex/wx/vlbox.tex index 1050b7f80e..e57ca9fd69 100644 --- a/docs/latex/wx/vlbox.tex +++ b/docs/latex/wx/vlbox.tex @@ -129,7 +129,7 @@ Get the number of items in the control. \constfunc{wxPoint}{GetMargins}{\void} Returns the margins used by the control. The {\tt x} field of the returned -point is the horizontal margine and the {\tt y} field is the vertical one. +point is the horizontal margin and the {\tt y} field is the vertical one. \wxheading{See also} diff --git a/docs/latex/wx/vscroll.tex b/docs/latex/wx/vscroll.tex index 52fbb30189..1f7a07fab4 100644 --- a/docs/latex/wx/vscroll.tex +++ b/docs/latex/wx/vscroll.tex @@ -33,7 +33,7 @@ moment on the scrolling is handled entirely by wxVScrolledWindow, you only need to draw the visible part of contents in your {\tt OnPaint()} method as usual. You should use \helpref{GetFirstVisibleLine()}{wxvscrolledwindowgetfirstvisibleline} and \helpref{GetLastVisibleLine()}{wxvscrolledwindowgetlastvisibleline} to -select the lines to display. ote that the device context origin is not shifted +select the lines to display. Note that the device context origin is not shifted so the first visible line always appears at the point $(0, 0)$ in physical as well as logical coordinates. @@ -210,7 +210,7 @@ should be less than or equal to {\it to}. \func{void}{RefreshAll}{\void} This function completely refreshes the control, recalculating the number of -items shown on screen and repaining them. It should be called when the values +items shown on screen and repainting them. It should be called when the values returned by \helpref{OnGetLineHeight}{wxvscrolledwindowongetlineheight} change for some reason and the window must be updated to reflect this. diff --git a/docs/latex/wx/window.tex b/docs/latex/wx/window.tex index dd9cf0aca3..0f3e498759 100644 --- a/docs/latex/wx/window.tex +++ b/docs/latex/wx/window.tex @@ -426,7 +426,7 @@ Dialog units are used for maintaining a dialog's proportions even if the font ch \helpref{wxWindow::ConvertDialogToPixels}{wxwindowconvertdialogtopixels} -\pythonnote{In place of a single overloaded method name, wxPythonimplements the following methods:\par +\pythonnote{In place of a single overloaded method name, wxPython implements the following methods:\par \indented{2cm}{\begin{twocollist} \twocolitem{{\bf ConvertDialogPointToPixels(point)}}{Accepts and returns a wxPoint} \twocolitem{{\bf ConvertDialogSizeToPixels(size)}}{Accepts and returns a wxSize} @@ -670,7 +670,7 @@ Gets the accelerator table for this window. See \helpref{wxAcceleratorTable}{wxa \membersection{wxWindow::GetAccessible}\label{wxwindowgetaccessible} -\func{wxAccessibile*}{GetAccessible}{\void} +\func{wxAccessible*}{GetAccessible}{\void} Returns the accessible object for this window, if any. @@ -1319,8 +1319,8 @@ the window overrides \helpref{ShouldInheritColours}{wxwindowshouldinheritcolours to return \false, the colours will not be changed no matter what and only the font might. -This rather complicated logic is necessary in order to accomodate the -different usage scenarius. The most common one is when all default attributes +This rather complicated logic is necessary in order to accommodate the +different usage scenarios. The most common one is when all default attributes are used and in this case, nothing should be inherited as in modern GUIs different controls use different fonts (and colours) than their siblings so they can't inherit the same value from the parent. However it was also deemed @@ -2379,7 +2379,7 @@ Sets the accelerator table for this window. See \helpref{wxAcceleratorTable}{wxa \membersection{wxWindow::SetAccessible}\label{wxwindowsetaccessible} -\func{void}{SetAccessible}{\param{wxAccessibile*}{ accessible}} +\func{void}{SetAccessible}{\param{wxAccessible*}{ accessible}} Sets the accessible for this window. Any existing accessible for this window will be deleted first, if not identical to {\it accessible}. @@ -3248,7 +3248,7 @@ See \helpref{Window styles}{windowstyles} for more information about flags. This function can be called under all platforms but only does anything under Mac OS X 10.3+ currently. Under this system, each of the standard control can -exist in several sizes which correpond to the elements of wxWindowVariant +exist in several sizes which correspond to the elements of wxWindowVariant enum: \begin{verbatim} enum wxWindowVariant diff --git a/docs/latex/wx/wizard.tex b/docs/latex/wx/wizard.tex index e222656bba..85ffbb41da 100644 --- a/docs/latex/wx/wizard.tex +++ b/docs/latex/wx/wizard.tex @@ -181,7 +181,7 @@ by repeatedly applying any page inserted into the sizer. Third, the minimal size specified using \helpref{SetPageSize}{wxwizardsetpagesize} and \helpref{FitToPage}{wxwizardfittopage}. Fourth, the total wizard height may -be increased to accomodate the bitmap height. Fifth and finally, wizards are +be increased to accommodate the bitmap height. Fifth and finally, wizards are never smaller than some built-in minimal size to avoid wizards that are too small. The caller can use \helpref{wxSizer::SetMinSize}{wxsizersetminsize} to enlarge it diff --git a/docs/latex/wx/wxstring.tex b/docs/latex/wx/wxstring.tex index eaccfee1a2..c66a16915e 100644 --- a/docs/latex/wx/wxstring.tex +++ b/docs/latex/wx/wxstring.tex @@ -492,7 +492,7 @@ wxString DeleteAllVowels(const wxString& original) \end{verbatim} -because it will avoid the need of reallocating string memory many times (in case +because it will avoid the need to reallocate string memory many times (in case of long strings). Note that it does not set the maximal length of a string - it will still expand if more than {\it nLen} characters are stored in it. Also, it does not truncate the existing string (use @@ -597,7 +597,7 @@ Case-sensitive comparison. Returns 0 if equal, 1 if greater or -1 if less. \constfunc{bool}{Contains}{\param{const wxString\&}{ str}} -Returns 1 if target appears anyhere in wxString; else 0. +Returns 1 if target appears anywhere in wxString; else 0. \membersection{wxString::Empty}\label{wxstringempty} @@ -1045,7 +1045,7 @@ familiar with C) results. \constfunc{bool}{ToULong}{\param{unsigned long}{ *val}, \param{int }{base = $10$}} -Attempts to convert the string to a ansigned integer in base {\it base}. +Attempts to convert the string to a unsigned integer in base {\it base}. Returns {\tt true} on success in which case the number is stored in the location pointed to by {\it val} or {\tt false} if the string does not represent a valid number in the given base. @@ -1122,7 +1122,7 @@ The macro wxWX2WCbuf is defined as the correct return type (without const). \constfunc{bool}{operator!}{\void} Empty string is false, so !string will only return true if the string is empty. -This allows the tests for NULLness of a {\it const char *} pointer and emptyness +This allows the tests for NULLness of a {\it const char *} pointer and emptiness of the string to look the same in the code and makes it easier to port old code to wxString. @@ -1145,8 +1145,8 @@ constructor (see \helpref{wxString constructors}{wxstringconstruct}). \membersection{wxString::operator $+$}\label{wxstringoperatorplus} -Concatenation: all these operators return a new strign equal to the sum of the -operands. +Concatenation: all these operators return a new string equal to the +concatenation of the operands. \func{wxString}{operator $+$}{\param{const wxString\&}{ x}, \param{const wxString\&}{ y}} @@ -1248,7 +1248,7 @@ These comparisons are case-sensitive. \section{\class{wxStringBuffer}}\label{wxstringbuffer} This tiny class allows to conveniently access the \helpref{wxString}{wxstring} -internal buffer as a writable pointer without any risk to forget to restore +internal buffer as a writable pointer without any risk of forgetting to restore the string to the usable state later. For example, assuming you have a low-level OS function called diff --git a/docs/readme_vms.txt b/docs/readme_vms.txt index c44a38a7f1..8aeb8c9d0b 100644 --- a/docs/readme_vms.txt +++ b/docs/readme_vms.txt @@ -4,7 +4,7 @@ and many tests have still to be done. The compilation was tested with -OpenVMS Alpha 7.2-1 -DECC 6.2 - -Compac C++ 6.2 + -Compaq C++ 6.2 -DECWindows 1.2-5 -GTK1.2.8 (for wxGTK) @@ -12,7 +12,7 @@ To get everything compiled you'll need to have installed prior to compiling wxWidgets: -Bison get it from http://www.openvms.digital.com/freeware/ - You' have to fix the following bug: + You'll have to fix the following bug: add the following 3 lines in BISON.SIMPLE #elif __VMS #include diff --git a/docs/tech/index.txt b/docs/tech/index.txt index 3268c252c3..f73bcf7303 100644 --- a/docs/tech/index.txt +++ b/docs/tech/index.txt @@ -1,4 +1,4 @@ - All wxWidgets techincal notes at a glance + All wxWidgets technical notes at a glance ========================================= tn0001.txt How to add a new sample @@ -18,7 +18,7 @@ tn0014.txt XRC resources format specification tn0015.txt How to add new bitmaps to wxWidgets UI elements tn0016.txt How to add new files and libraries to wxWidgets build system (Bakefile) tn0017.txt How to write unit tests for wxWidgets classes -tn0018.txt How to add a new font encoding/charset to wxWidgets? +tn0018.txt How to add a new font encoding/charset to wxWidgets Version: $Id$ diff --git a/docs/tech/tn0002.txt b/docs/tech/tn0002.txt index 54f35fe6d3..9568ee628a 100644 --- a/docs/tech/tn0002.txt +++ b/docs/tech/tn0002.txt @@ -12,7 +12,7 @@ First of all, here is what you will need: mirror (RPMs and DEBs are also available from the usual places) b) for Windows you can download the precompiled binaries from - www.wxwidgets.org or install PoEdit (poedit.sourceforge.org) and + www.wxwidgets.org or install PoEdit (poedit.sourceforge.net) and add /poEdit/bin to your path (so it can find xgettext). 2. A way to run a program recursively on an entire directory from the command @@ -65,6 +65,9 @@ Author: VZ Version: $Id$ $Log$ +Revision 1.5 2004/10/22 19:12:59 KH +*** empty log message *** + Revision 1.4 2004/05/04 08:26:58 JS Name change replacements diff --git a/docs/tech/tn0014.txt b/docs/tech/tn0014.txt index 29e4f027e1..440a371d7e 100644 --- a/docs/tech/tn0014.txt +++ b/docs/tech/tn0014.txt @@ -89,8 +89,8 @@ and "subclass". "class" must always be present, it tells XRC what wxWidgets object should be created in this place. The other two are optional. "name" is ID used to identify the object. It is the value passed to the XRCID() macro and is also used to construct wxWindow's id and name attributes and must be unique -among all children of the neareset container object (wxDialog, wxFrame, -wxPanel, wxNotebook) upside from the object in XML nodes hiearchy (two distinct +among all children of the nearest container object (wxDialog, wxFrame, +wxPanel, wxNotebook) upside from the object in XML nodes hierarchy (two distinct containers may contain objects with same "name", though). "subclass" is optional name of class whose constructor will be called instead of the constructor for "class". Subclass must be available in the program that loads @@ -109,10 +109,10 @@ is allowed to register new object handlers within XRC and extend it to accept new classes (and therefore different 's child nodes). node is identical to , except that it does _not_ have -"class" property and has additonal required property "ref". It's concept is +"class" property and has additional required property "ref". It's concept is similar to Unix symlinks: value of the "ref" property is equal to the value of "name" property of some existing node (called referred node) in the resources -(not neccessary top-level). Referred node's "class" property and all subnodes +(not necessary top-level). Referred node's "class" property and all subnodes are copied in place of the referee node which is then processed as regular node. If the node itself has child nodes, then these nodes _override_ any nodes from the referred node. @@ -154,7 +154,7 @@ by XRC parser according to this table: "__" -> "_" "\n" -> line break (C character '\n') "\r" -> carriage return (C character '\r') - "\t" -> tabelator (C character '\t') + "\t" -> tab (C character '\t') "\\" -> "\" (introduced in version 2.5.3.0, not done in earlier versions) @@ -196,7 +196,7 @@ Style[wxSomeClass] ------------------ List of style flags that can be passed to wxSomeClass' constructor. Flags are written in same way as in C++ code (e.g. "wxSUNKEN_BORDER", -"wxHW_SCROLLBAR_NEVER") and are delimined with any combination of whitespaces +"wxHW_SCROLLBAR_NEVER") and are delimited with any combination of whitespaces and '|'. Possible flags are class-dependent and are not described in this technote. Please refer to wxWidgets manual for all styles that given class can accept; if XRC does not accept a flag listed in wxWidgets documentation, it is @@ -209,7 +209,7 @@ Attribute value is interpreted as filename (either absolute or relative to the location of XRC resource file). In addition, attribute node may have "stock_id" and "stock_client" properties. Their values may be any of wxArtID (or wxArtClient respectively) values as used by wxArtProvider (because the user may -define own constants, efectively any string is legal here). Examples are +define own constants, effectively any string is legal here). Examples are "wxART_FILE_OPEN" (id) or "wxART_MENU" (client). Any of "stock_id" or "stock_client" properties or the filename may be omitted. @@ -321,8 +321,8 @@ orientation "horizontal"|"vertical" horizontal wxSplitterWindow must have at least one and at most two children objects. If there's only one child object, it is passed to wxSplitterWindow::Initialize -and the splitter is created unsplitted. If there are two children, the -splitter is created splitted, either horizontally or vertically depending +and the splitter is created unsplit. If there are two children, the +splitter is created split, either horizontally or vertically depending on the value of "orientation" attribute. wxStatusBar diff --git a/docs/tech/tn0015.txt b/docs/tech/tn0015.txt index 365d5e46af..167fc35735 100644 --- a/docs/tech/tn0015.txt +++ b/docs/tech/tn0015.txt @@ -80,7 +80,7 @@ It is highly desirable to let the users know what stock bitmaps are available in wxWidgets. The "artprov" sample serves this purpose: it contains a browser dialog that displays all available art resources. -It has to be updated to accomodate for new bitmaps. Fortunately, this is +It has to be updated to accommodate for new bitmaps. Fortunately, this is trivial: open $(wx)/samples/artprov/artbrows.cpp in text editor and ART_ICON(wxART_MY_BITMAP) line to the FillBitmaps() function. diff --git a/docs/tech/tn0016.txt b/docs/tech/tn0016.txt index 22fea999ad..48af6442c2 100644 --- a/docs/tech/tn0016.txt +++ b/docs/tech/tn0016.txt @@ -83,11 +83,11 @@ All files used by main libraries are listed in files.bkl. The file is organized into variables for toolkits, platforms and libraries. The variables come in pairs: there's always FOO_SRC for source files and FOO_HDR for header files. Platform or toolkit specific files are grouped together in variable -with platform or tookit name in them, e.g. BASE_WIN32_SRC, BASE_UNIX_SRC, +with platform or toolkit name in them, e.g. BASE_WIN32_SRC, BASE_UNIX_SRC, GTK_SRC, MOTIF_SRC. Note: A side effect of this toolkit-centric organization is that one file may - be present several times in files.bkl in different contenxt. + be present several times in files.bkl in different contexts. When you are adding a file, you must put it into appropriate variable. This is easy if you are adding the file to library that is always built from same @@ -194,7 +194,7 @@ f) Update configure.in and wx-config.in to contain information about the library and needed linker flags: * Add "foo" to either CORE_BASE_LIBS or CORE_GUI_LIBS in configure.in so that wxFoo is not treated as contrib library in monolithic build. - * If wxFoo links against additional libraries, add neccessary linker + * If wxFoo links against additional libraries, add necessary linker flags and libraries to ldflags_foo and ldlibs_foo variables in wx-config.in (both are optional). diff --git a/docs/toback24.txt b/docs/toback24.txt index 7419839a66..ee05af61f8 100644 --- a/docs/toback24.txt +++ b/docs/toback24.txt @@ -209,7 +209,7 @@ Checking in window.cpp; /pack/cvsroots/wxwindows/wxWidgets/src/msw/window.cpp,v <-- window.cpp new revision: 1.431; previous revision: 1.430 -29. Fix infinite loop in IsDialoMessage when a panel is reparented after +29. Fix infinite loop in IsDialogMessage when a panel is reparented after creation (as happens with XRC) Checking in src/msw/window.cpp; /pack/cvsroots/wxwindows/wxWidgets/src/msw/window.cpp,v <-- window.cpp diff --git a/docs/todo30.txt b/docs/todo30.txt index 506b3b4871..d02d035b41 100644 --- a/docs/todo30.txt +++ b/docs/todo30.txt @@ -74,7 +74,7 @@ Core We need a (GUI) tool to generate the project/makefiles for all supported platforms/compilers. Not sure if it should be used for the library itself (would be nice to have something like "make menuconfig" for Linux kernel - which allows you to navigate easily amon all of the configure/setup.h + which allows you to navigate easily among all of the configure/setup.h options but there is a problem with distributing such tool as it can't be compiled by the user because it is needed before the library is built) but we definitely need it for the users makefiles. @@ -119,7 +119,7 @@ Modules/Plugins Architecture ------------ -We aim to arrive at a lazy initializiation of modules only when they are first +We aim to arrive at a lazy initialization of modules only when they are first needed. Dependency information between modules is needed. Dynamic Plug-In loading and unloading must be compatible with that. -- 2.45.2