From c9f00eebab797b1fa52a4ffbd18c9ec87b944da6 Mon Sep 17 00:00:00 2001
From: Robin Dunn <robin@alldunn.com>
Date: Wed, 28 Mar 2001 17:03:23 +0000
Subject: [PATCH] fixed typo in a couple method names for wxPython, also some
 changes in the wxPython chapter that have been sitting on my disk for some
 time...

git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@9599 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
---
 docs/latex/wx/window.tex   | 30 ++++++------
 docs/latex/wx/wxPython.tex | 97 +++++++-------------------------------
 2 files changed, 32 insertions(+), 95 deletions(-)

diff --git a/docs/latex/wx/window.tex b/docs/latex/wx/window.tex
index 7328f7ec10..a6acf75d7e 100644
--- a/docs/latex/wx/window.tex
+++ b/docs/latex/wx/window.tex
@@ -178,7 +178,7 @@ centered relative to the screen anyhow.
 
 \func{void}{CentreOnParent}{\param{int}{ direction = wxBOTH}}
 
-Centres the window on its parent. This is a more readable synonym for 
+Centres the window on its parent. This is a more readable synonym for
 \helpref{Centre}{wxwindowcentre}.
 
 \wxheading{Parameters}
@@ -190,7 +190,7 @@ or {\tt wxBOTH}.}
 
 This methods provides for a way to center top level windows over their
 parents instead of the entire screen.  If there is no parent or if the
-window is not a top level window, then behaviour is the same as 
+window is not a top level window, then behaviour is the same as
 \helpref{wxWindow::Centre}{wxwindowcentre}.
 
 \wxheading{See also}
@@ -511,7 +511,7 @@ Returns a reference to the list of the window's children.
 
 \constfunc{virtual void}{GetClientSize}{\param{int* }{width}, \param{int* }{height}}
 
-\perlnote{In wxPerl this method takes no parameter and returns 
+\perlnote{In wxPerl this method takes no parameter and returns
 a 2-element list {\tt ( width, height )}.}
 
 \constfunc{virtual wxSize}{GetClientSize}{\void}
@@ -528,8 +528,8 @@ area which may be drawn on by the programmer, excluding title bar, border etc.
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
-\twocolitem{{\bf wxGetClientSizeTuple()}}{Returns a 2-tuple of (width, height)}
-\twocolitem{{\bf wxGetClientSize()}}{Returns a wxSize object}
+\twocolitem{{\bf GetClientSizeTuple()}}{Returns a 2-tuple of (width, height)}
+\twocolitem{{\bf GetClientSize()}}{Returns a wxSize object}
 \end{twocollist}}
 }
 
@@ -547,7 +547,7 @@ Returns the associated drop target, which may be NULL.
 
 \wxheading{See also}
 
-\helpref{wxWindow::SetDropTarget}{wxwindowsetdroptarget}, 
+\helpref{wxWindow::SetDropTarget}{wxwindowsetdroptarget},
 \helpref{Drag and drop overview}{wxdndoverview}
 
 \membersection{wxWindow::GetEventHandler}\label{wxwindowgeteventhandler}
@@ -1047,7 +1047,7 @@ Note that the ASCII values do not have explicit key codes: they are passed as AS
 values.
 
 Note that not all keypresses can be intercepted this way. If you wish to intercept modifier
-keypresses, then you will need to use \helpref{wxWindow::OnKeyDown}{wxwindowonkeydown} or 
+keypresses, then you will need to use \helpref{wxWindow::OnKeyDown}{wxwindowonkeydown} or
 \helpref{wxWindow::OnKeyUp}{wxwindowonkeyup}.
 
 Most, but not all, windows allow keypresses to be intercepted.
@@ -1084,7 +1084,7 @@ values.
 
 This function is only relevant to top-level windows (frames and dialogs), and under
 Windows only. Under GTK the normal EVT\_CHAR\_ event has the functionality, i.e.
-you can intercepts it and if you don't call \helpref{wxEvent::Skip}{wxeventskip} 
+you can intercepts it and if you don't call \helpref{wxEvent::Skip}{wxeventskip}
 the window won't get the event.
 
 \wxheading{See also}
@@ -1247,7 +1247,7 @@ use the EVT\_KEY\_DOWN macro in an event table definition. Your {\bf OnKeyDown}
 default function to achieve default keypress functionality.
 
 Note that not all keypresses can be intercepted this way. If you wish to intercept special
-keys, such as shift, control, and function keys, then you will need to use \helpref{wxWindow::OnKeyDown}{wxwindowonkeydown} or 
+keys, such as shift, control, and function keys, then you will need to use \helpref{wxWindow::OnKeyDown}{wxwindowonkeydown} or
 \helpref{wxWindow::OnKeyUp}{wxwindowonkeyup}.
 
 Most, but not all, windows allow keypresses to be intercepted.
@@ -1276,7 +1276,7 @@ use the EVT\_KEY\_UP macro in an event table definition. Your {\bf OnKeyUp} hand
 default function to achieve default keypress functionality.
 
 Note that not all keypresses can be intercepted this way. If you wish to intercept special
-keys, such as shift, control, and function keys, then you will need to use \helpref{wxWindow::OnKeyDown}{wxwindowonkeydown} or 
+keys, such as shift, control, and function keys, then you will need to use \helpref{wxWindow::OnKeyDown}{wxwindowonkeydown} or
 \helpref{wxWindow::OnKeyUp}{wxwindowonkeyup}.
 
 Most, but not all, windows allow key up events to be intercepted.
@@ -1806,8 +1806,8 @@ Sets the accelerator table for this window. See \helpref{wxAcceleratorTable}{wxa
 \func{void}{SetAutoLayout}{\param{bool}{ autoLayout}}
 
 Determines whether the \helpref{wxWindow::Layout}{wxwindowlayout} function will
-be called automatically when the window is resized. Use in connection with 
-\helpref{wxWindow::SetSizer}{wxwindowsetsizer} and 
+be called automatically when the window is resized. Use in connection with
+\helpref{wxWindow::SetSizer}{wxwindowsetsizer} and
 \helpref{wxWindow::SetConstraints}{wxwindowsetconstraints} for laying out subwindows.
 
 \wxheading{Parameters}
@@ -1936,7 +1936,7 @@ If the window already has a drop target, it is deleted.
 
 \wxheading{See also}
 
-\helpref{wxWindow::GetDropTarget}{wxwindowgetdroptarget}, 
+\helpref{wxWindow::GetDropTarget}{wxwindowgetdroptarget},
 \helpref{Drag and drop overview}{wxdndoverview}
 
 \membersection{wxWindow::SetEventHandler}\label{wxwindowseteventhandler}
@@ -2372,9 +2372,9 @@ create a new validator of this type.
 
 \func{void}{SetToolTip}{\param{wxToolTip* }{tip}}
 
-Attach a tooltip to the window. 
+Attach a tooltip to the window.
 
-See also: \helpref{GetToolTip}{wxwindowgettooltip}, 
+See also: \helpref{GetToolTip}{wxwindowgettooltip},
           \helpref{wxToolTip}{wxtooltip}
 
 
diff --git a/docs/latex/wx/wxPython.tex b/docs/latex/wx/wxPython.tex
index 84c2a75c3d..b735e6cb12 100644
--- a/docs/latex/wx/wxPython.tex
+++ b/docs/latex/wx/wxPython.tex
@@ -35,7 +35,7 @@ wxPython is a Python package that can be imported at runtime that
 includes a collection of Python modules and an extension module
 (native code). It provides a series of Python classes that mirror (or
 shadow) many of the wxWindows GUI classes. This extension module
-attempts to mirror the class hierarchy of wxWindows as closely as
+attempts to mirror the class heirarchy of wxWindows as closely as
 possible. This means that there is a wxFrame class in wxPython that
 looks, smells, tastes and acts almost the same as the wxFrame class in
 the C++ version.
@@ -45,16 +45,16 @@ applications, or in situations where Python is embedded in a C++
 application as an internal scripting or macro language.
 
 Currently wxPython is available for Win32 platforms and the GTK
-toolkit (wxGTK) on most Unix/X-windows platforms. The effort to
-enable wxPython for wxMotif will begin shortly. See \helpref{Building Python}{wxpbuild} for
+toolkit (wxGTK) on most Unix/X-windows platforms. See the wxPython
+website \urlref{http://wxPython.org/}{http://wxPython.org/} for
 details about getting wxPython working for you.
 
 %----------------------------------------------------------------------
 \section{Why use wxPython?}\label{wxpwhy}
 
 So why would you want to use wxPython over just C++ and wxWindows?
-Personally I prefer using Python for everything. I only use C++ when
-I absolutely have to eek more performance out of an algorithm, and even
+Personally I prefer using Python for everything. I only use C++ when I
+absolutely have to eek more performance out of an algorithm, and even
 then I usually code it as an extension module and leave the majority
 of the program in Python.
 
@@ -116,77 +116,6 @@ wrappers around some C or C++ toolkit or another, and most are not
 cross-platform compatible. See \urlref{this link}{http://www.python.org/download/Contributed.html\#Graphics}
 for a listing of a few of them.
 
-%----------------------------------------------------------------------
-\section{Building wxPython}\label{wxpbuild}
-
-I used SWIG (\urlref{http://www.swig.org}{http://www.swig.org}) to
-to create the source code for the
-extension module. This enabled me to only have to deal with a small
-amount of code and only have to bother with the exceptional issues.
-SWIG takes care of the rest and generates all the repetitive code for
-me. You don't need SWIG to build the extension module as all the
-generated C++ code is included under the src directory.
-
-I added a few minor features to SWIG to control some of the code
-generation. If you want to play around with this you will need to get
-a recent version of SWIG from their CVS or from a daily build. See
-\urlref{http://www.swig.org/}{http://www.swig.org/} for details.
-
-wxPython is organized as a Python package. This means that the
-directory containing the results of the build process should be a
-subdirectory of a directory on the {\tt PYTHONPATH}. (And preferably should
-be named wxPython.) You can control where the build process will dump
-wxPython by setting the {\tt TARGETDIR} variable for the build utility (see
-below).
-
-\begin{enumerate}\itemsep=0pt
-\item Build wxWindows as described in its BuildCVS.txt file. For Unix
-systems I run configure with these flags:
-
-\begin{verbatim}
-                --with-gtk
-                --with-libjpeg
-                --without-odbc
-                --enable-unicode=no
-                --enable-threads=yes
-                --enable-socket=yes
-                --enable-static=no
-                --enable-shared=yes
-                --disable-std_iostreams
-\end{verbatim}
-
-You can use whatever flags you want, but I know these work.
-
-For Win32 systems I use Visual C++ 6.0, but 5.0 should work also. The
-build utility currently does not support any other Win32 compilers.
-\item At this point you may want to make an alias or symlink, script,
-batch file, whatever on the PATH that invokes {\tt \$(WXWIN)/utils/wxPython/distrib/build.py} to
-help simplify matters somewhat. For example, on my Win32 system I have a file named
- {\tt build}.bat in a directory on the PATH that contains:
-
-{\tt python \%WXWIN/utils/wxPython/distrib/build.py \%1 \%2 \%3 \%4 \%5 \%6}
-\item Change into the {\tt \$(WXWIN)/utils/wxPython/src} directory.
-\item Type "{\tt build -b}" to build wxPython and "{\tt build -i}" to
-install it, or "{\tt build -bi}" to do both steps at once.
-
-The build.py script actually generates a Makefile based on what it
-finds on your system and information found in the build.cfg file.
-If you have troubles building or you want it built or installed in
-a different way, take a look at the docstring in build.py. You are
-able to override many configuration options in a file named
-build.local.
-\item To build and install the add-on modules, change to the appropriate
-directory under {\tt \$(WXWIN)/utils/wxPython/modules} and run the build
-utility again.
-\item Change to the {\tt \$(WXWIN)/utils/wxPython/demo} directory.
-\item Try executing the demo program. For example:
-
-{\tt python demo.py}
-
-To run it without requiring a console on Win32, you can use the
-{\tt pythonw.exe} version of Python either from the command line or from a
-shortcut.
-\end{enumerate}
 
 %----------------------------------------------------------------------
 \section{Using wxPython}\label{wxpusing}
@@ -397,11 +326,14 @@ as possible to the C++ spec over time.
 \item \helpref{wxFileDataObject}{wxfiledataobject}
 \item \helpref{wxFileDialog}{wxfiledialog}
 \item \helpref{wxFileDropTarget}{wxfiledroptarget}
+\item \helpref{wxFileSystem}{wxfilesystem}
+\item \helpref{wxFileSystemHandler}{wxfilesystemhandler}
 \item \helpref{wxFocusEvent}{wxfocusevent}
 \item \helpref{wxFontData}{wxfontdata}
 \item \helpref{wxFontDialog}{wxfontdialog}
 \item \helpref{wxFont}{wxfont}
 \item \helpref{wxFrame}{wxframe}
+\item \helpref{wxFSFile}{wxfsfile}
 \item \helpref{wxGauge}{wxgauge}
 \item wxGIFHandler
 \item wxGLCanvas
@@ -429,6 +361,8 @@ as possible to the C++ spec over time.
 \item \helpref{wxImageList}{wximagelist}
 \item \helpref{wxIndividualLayoutConstraint}{wxindividuallayoutconstraint}
 \item \helpref{wxInitDialogEvent}{wxinitdialogevent}
+\item \helpref{wxInputStream}{wxinputstream}
+\item \helpref{wxInternetFSHandler}{wxinternetfshandler}
 \item \helpref{wxJoystickEvent}{wxjoystickevent}
 \item wxJPEGHandler
 \item \helpref{wxKeyEvent}{wxkeyevent}
@@ -438,12 +372,13 @@ as possible to the C++ spec over time.
 \item \helpref{wxListCtrl}{wxlistctrl}
 \item \helpref{wxListEvent}{wxlistevent}
 \item \helpref{wxListItem}{wxlistctrlsetitem}
+\item \helpref{wxMask}{wxmask}
+\item wxMaximizeEvent
 \item \helpref{wxMDIChildFrame}{wxmdichildframe}
 \item \helpref{wxMDIClientWindow}{wxmdiclientwindow}
 \item \helpref{wxMDIParentFrame}{wxmdiparentframe}
-\item \helpref{wxMask}{wxmask}
-\item wxMaximizeEvent
 \item \helpref{wxMemoryDC}{wxmemorydc}
+\item \helpref{wxMemoryFSHandler}{wxmemoryfshandler}
 \item \helpref{wxMenuBar}{wxmenubar}
 \item \helpref{wxMenuEvent}{wxmenuevent}
 \item \helpref{wxMenuItem}{wxmenuitem}
@@ -473,6 +408,7 @@ as possible to the C++ spec over time.
 \item \helpref{wxPrintPreview}{wxprintpreview}
 \item \helpref{wxPrinterDC}{wxprinterdc}
 \item \helpref{wxPrintout}{wxprintout}
+\item \helpref{wxProcess}{wxprocess}
 \item \helpref{wxQueryLayoutInfoEvent}{wxquerylayoutinfoevent}
 \item \helpref{wxRadioBox}{wxradiobox}
 \item \helpref{wxRadioButton}{wxradiobutton}
@@ -525,6 +461,7 @@ as possible to the C++ spec over time.
 \item \helpref{wxValidator}{wxvalidator}
 \item \helpref{wxWindowDC}{wxwindowdc}
 \item \helpref{wxWindow}{wxwindow}
+\item \helpref{wxZipFSHandler}{wxzipfshandler}
 \end{itemize}
 
 %----------------------------------------------------------------------
@@ -537,10 +474,10 @@ various sources of help, but probably the best source is the
 wxPython-users mail list. You can view the archive or subscribe by
 going to
 
-\urlref{http://wxwindows.org/mailman/listinfo/wxpython-users}{http://wxwindows.org/mailman/listinfo/wxpython-users}
+\urlref{http://lists.sourceforge.net/mailman/listinfo/wxpython-users}{http://lists.sourceforge.net/mailman/listinfo/wxpython-users}
 
 Or you can send mail directly to the list using this address:
 
-wxpython-users@wxwindows.org
+wxpython-users@lists.sourceforge.net
 
 
-- 
2.50.0

