From 3b7c589c553d4de9fc9509857398e0da421440d0 Mon Sep 17 00:00:00 2001 From: Vadim Zeitlin Date: Sun, 3 Feb 2008 12:20:06 +0000 Subject: [PATCH] generate include/wx/univ/setup0.h from setup_inc.h too git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@51514 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775 --- build/update-setup-h | 3 + include/wx/univ/setup0.h | 1322 +++-------------------------------- include/wx/univ/setup_inc.h | 26 + 3 files changed, 115 insertions(+), 1236 deletions(-) create mode 100644 include/wx/univ/setup_inc.h diff --git a/build/update-setup-h b/build/update-setup-h index 894cd16112..f62a19dbec 100755 --- a/build/update-setup-h +++ b/build/update-setup-h @@ -102,10 +102,13 @@ update_common_setup_h include/wx/mac/setup0.h update_common_setup_h include/wx/palmos/setup0.h update_common_setup_h include/wx/os2/setup0.h update_common_setup_h include/wx/motif/setup0.h +update_common_setup_h include/wx/univ/setup0.h update_common_setup_h setup.h.in update_msw_setup_h include/wx/msw/setup0.h update_msw_setup_h setup.h.in +update_single_setup_h wxUniv include/wx/univ/setup_inc.h include/wx/univ/setup0.h + exit $rc diff --git a/include/wx/univ/setup0.h b/include/wx/univ/setup0.h index 5009c9f2e9..0df4fe7398 100644 --- a/include/wx/univ/setup0.h +++ b/include/wx/univ/setup0.h @@ -1,1222 +1,17 @@ -/////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////// // Name: wx/univ/setup.h -// Purpose: configuration settings for wxUniversal/MSW -// Author: Vadim Zeitlin -// Modified by: -// Created: 14.08.00 +// Purpose: Configuration for the universal build of the library +// Author: Julian Smart +// Created: 01/02/97 // RCS-ID: $Id$ -// Copyright: (c) 2000 SciTech Software, Inc. (www.scitechsoft.com) +// Copyright: (c) Julian Smart // Licence: wxWindows licence -/////////////////////////////////////////////////////////////////////////////// - -#ifndef _WX_UNIV_SETUP_H_ -#define _WX_UNIV_SETUP_H_ - -// ---------------------------------------------------------------------------- -// global settings -// ---------------------------------------------------------------------------- -// define this to 0 when building wxBase library - this can also be done from -// makefile/project file overriding the value here -#ifndef wxUSE_GUI - #define wxUSE_GUI 1 -#endif // wxUSE_GUI - -// ---------------------------------------------------------------------------- -// compatibility settings -// ---------------------------------------------------------------------------- - -// This setting determines the compatibility with 2.6 API: set it to 0 to -// flag all cases of using deprecated functions. -// -// Default is 1 but please try building your code with 0 as the default will -// change to 0 in the next version and the deprecated functions will disappear -// in the version after it completely. -// -// Recommended setting: 0 (please update your code) -#define WXWIN_COMPATIBILITY_2_6 0 - -// This setting determines the compatibility with 2.8 API: set it to 0 to -// flag all cases of using deprecated functions. -// -// Default is 1 but please try building your code with 0 as the default will -// change to 0 in the next version and the deprecated functions will disappear -// in the version after it completely. -// -// Recommended setting: 0 (please update your code) -#define WXWIN_COMPATIBILITY_2_8 1 - -// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when -// default system font is used for wxWindow::GetCharWidth/Height() instead of -// the current font. -// -// Default is 0 -// -// Recommended setting: 0 -#define wxDIALOG_UNIT_COMPATIBILITY 0 - -// ---------------------------------------------------------------------------- -// debugging settings -// ---------------------------------------------------------------------------- - -// Generic comment about debugging settings: they are very useful if you don't -// use any other memory leak detection tools such as Purify/BoundsChecker, but -// are probably redundant otherwise. Also, Visual C++ CRT has the same features -// as wxWidgets memory debugging subsystem built in since version 5.0 and you -// may prefer to use it instead of built in memory debugging code because it is -// faster and more fool proof. -// -// Using VC++ CRT memory debugging is enabled by default in debug mode -// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0) -// and if __NO_VC_CRTDBG__ is not defined. - -// If 1, enables wxDebugContext, for writing error messages to file, etc. If -// __WXDEBUG__ is not defined, will still use the normal memory operators. -// -// Default is 0 -// -// Recommended setting: 0 -#define wxUSE_DEBUG_CONTEXT 0 - -// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* -// __WXDEBUG__ is also defined. -// -// WARNING: this code may not work with all architectures, especially if -// alignment is an issue. This switch is currently ignored for mingw / cygwin -// -// Default is 0 -// -// Recommended setting: 1 if you are not using a memory debugging tool, else 0 -#define wxUSE_MEMORY_TRACING 0 - -// In debug mode, cause new and delete to be redefined globally. -// If this causes problems (e.g. link errors which is a common problem -// especially if you use another library which also redefines the global new -// and delete), set this to 0. -// This switch is currently ignored for mingw / cygwin -// -// Default is 0 -// -// Recommended setting: 0 -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 - -// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If -// this causes problems (e.g. link errors), set this to 0. You may need to set -// this to 0 if using templates (at least for VC++). This switch is currently -// ignored for mingw / cygwin / CodeWarrior -// -// Default is 0 -// -// Recommended setting: 0 -#define wxUSE_DEBUG_NEW_ALWAYS 0 - -// wxHandleFatalExceptions() may be used to catch the program faults at run -// time and, instead of terminating the program with a usual GPF message box, -// call the user-defined wxApp::OnFatalException() function. If you set -// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work. -// -// This setting is for Win32 only and can only be enabled if your compiler -// supports Win32 structured exception handling (currently only VC++ does) -// -// Default is 1 -// -// Recommended setting: 1 if your compiler supports it. -#define wxUSE_ON_FATAL_EXCEPTION 1 - -// Set this to 1 to be able to generate a human-readable (unlike -// machine-readable minidump created by wxCrashReport::Generate()) stack back -// trace when your program crashes using wxStackWalker -// -// Default is 1 if supported by the compiler. -// -// Recommended setting: 1, set to 0 if your programs never crash -#define wxUSE_STACKWALKER 1 - -// Set this to 1 to compile in wxDebugReport class which allows you to create -// and optionally upload to your web site a debug report consisting of back -// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. -// -// Default is 1 if supported by the compiler. -// -// Recommended setting: 1, it is compiled into a separate library so there -// is no overhead if you don't use it -#define wxUSE_DEBUGREPORT 1 - -// ---------------------------------------------------------------------------- -// Unicode support -// ---------------------------------------------------------------------------- - -// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be -// defined as wchar_t, wxString will use Unicode internally. If you set this -// to 1, you must use wxT() macro for all literal strings in the program. -// -// Unicode is currently only fully supported under Windows NT/2000/XP -// (Windows 9x doesn't support it and the programs compiled in Unicode mode -// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). -// -// Default is 0 (but only because of makefiles) -// -// Recommended setting: 1 -#ifndef wxUSE_UNICODE - #define wxUSE_UNICODE 0 -#endif - -// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without -// compiling the program in Unicode mode. More precisely, it will be possible -// to construct wxString from a wide (Unicode) string and convert any wxString -// to Unicode. -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_WCHAR_T 1 - -// ---------------------------------------------------------------------------- -// global features -// ---------------------------------------------------------------------------- - -// Compile library in exception-safe mode? If set to 1, the library will try to -// behave correctly in presence of exceptions (even though it still will not -// use the exceptions itself) and notify the user code about any unhandled -// exceptions. If set to 0, propagation of the exceptions through the library -// code will lead to undefined behaviour -- but the code itself will be -// slightly smaller and faster. -// -// Note that like wxUSE_THREADS this option is automatically set to 0 if -// wxNO_EXCEPTIONS is defined. -// -// Default is 1 -// -// Recommended setting: depends on whether you intend to use C++ exceptions -// in your own code (1 if you do, 0 if you don't) -#define wxUSE_EXCEPTIONS 1 - -// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI -// -// Default is 0 -// -// Recommended setting: 0 (this is still work in progress...) -#define wxUSE_EXTENDED_RTTI 0 - -// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from -// std::list and std::vector, with a compatibility interface, -// and for wxHashMap to be implemented with templates. -// -// Default is 0 -// -// Recommended setting: YMMV -#define wxUSE_STL 0 - -// Support for message/error logging. This includes wxLogXXX() functions and -// wxLog and derived classes. Don't set this to 0 unless you really know what -// you are doing. -// -// Default is 1 -// -// Recommended setting: 1 (always) -#define wxUSE_LOG 1 - -// Recommended setting: 1 -#define wxUSE_LOGWINDOW 1 - -// Recommended setting: 1 -#define wxUSE_LOGGUI 1 - -// Recommended setting: 1 -#define wxUSE_LOG_DIALOG 1 - -// Support for command line parsing using wxCmdLineParser class. -// -// Default is 1 -// -// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) -#define wxUSE_CMDLINE_PARSER 1 - -// Support for multithreaded applications: if 1, compile in thread classes -// (thread.h) and make the library a bit more thread safe. Although thread -// support is quite stable by now, you may still consider recompiling the -// library without it if you have no use for it - this will result in a -// somewhat smaller and faster operation. -// -// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset -// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in -// build/msw/config.* file this value will have no effect. -// -// Default is 1 -// -// Recommended setting: 0 unless you do plan to develop MT applications -#define wxUSE_THREADS 1 - -// If enabled, compiles wxWidgets streams classes -// -// wx stream classes are used for image IO, process IO redirection, network -// protocols implementation and much more and so disabling this results in a -// lot of other functionality being lost. -// -// Default is 1 -// -// Recommended setting: 1 as setting it to 0 disables many other things -#define wxUSE_STREAMS 1 - -// Use standard C++ streams if 1 instead of wx streams in some places. If -// disabled (default), wx streams are used everywhere and wxWidgets doesn't -// depend on the standard streams library. -// -// Notice that enabling this does not replace wx streams with std streams -// everywhere, in a lot of places wx streams are used no matter what. -// -// Default is 0 -// -// Recommended setting: 1 if you use the standard streams anyhow and so -// dependency on the standard streams library is not a -// problem -#define wxUSE_STD_IOSTREAM 0 - -// Enable conversion to standard C++ string if 1. -// -// Default is 1 for most compilers. -// -// Currently the Digital Mars and Watcom compilers come without standard C++ -// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have -// them (e.g. from STLPort). -// -// VC++ 5.0 does include standard C++ library header, however they produce -// many warnings that can't be turned off when compiled at warning level 4. -#if defined(__DMC__) || defined(__WATCOMC__) \ - || (defined(_MSC_VER) && _MSC_VER < 1200) - #define wxUSE_STD_STRING 0 -#else - #define wxUSE_STD_STRING 1 -#endif - -// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. -// Note that if the system's implementation does not support positional -// parameters, setting this to 1 forces the use of the wxWidgets implementation -// of wxVsnprintf. The standard vsnprintf() supports positional parameters on -// many Unix systems but usually doesn't under Windows. -// -// Positional parameters are very useful when translating a program since using -// them in formatting strings allow translators to correctly reorder the -// translated sentences. -// -// Default is 1 -// -// Recommended setting: 1 if you want to support multiple languages -#define wxUSE_PRINTF_POS_PARAMS 1 - -// ---------------------------------------------------------------------------- -// non GUI features selection -// ---------------------------------------------------------------------------- - -// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit -// integer which is implemented in terms of native 64 bit integers if any or -// uses emulation otherwise. -// -// This class is required by wxDateTime and so you should enable it if you want -// to use wxDateTime. For most modern platforms, it will use the native 64 bit -// integers in which case (almost) all of its functions are inline and it -// almost does not take any space, so there should be no reason to switch it -// off. -// -// Recommended setting: 1 -#define wxUSE_LONGLONG 1 - -// Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for -// storing binary data in wxConfig on most platforms. -// -// Default is 1. -// -// Recommended setting: 1 (but can be safely disabled if you don't use it) -#define wxUSE_BASE64 1 - -// Set this to 1 to be able to use wxEventLoop even in console applications -// (i.e. using base library only, without GUI). This is mostly useful for -// processing socket events but is also necessary to use timers in console -// applications -// -// Default is 1. -// -// Recommended setting: 1 (but can be safely disabled if you don't use it) -#define wxUSE_CONSOLE_EVENTLOOP 1 - -// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level -// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. -// -// Default is 1 -// -// Recommended setting: 1 (wxFile is highly recommended as it is required by -// i18n code, wxFileConfig and others) -#define wxUSE_FILE 1 -#define wxUSE_FFILE 1 - -// Use wxFSVolume class providing access to the configured/active mount points -// -// Default is 1 -// -// Recommended setting: 1 (but may be safely disabled if you don't use it) -#define wxUSE_FSVOLUME 1 - -// Use wxStandardPaths class which allows to retrieve some standard locations -// in the file system -// -// Default is 1 -// -// Recommended setting: 1 (may be disabled to save space, but not much) -#define wxUSE_STDPATHS 1 - -// use wxTextBuffer class: required by wxTextFile -#define wxUSE_TEXTBUFFER 1 - -// use wxTextFile class: requires wxFile and wxTextBuffer, required by -// wxFileConfig -#define wxUSE_TEXTFILE 1 - -// i18n support: _() macro, wxLocale class. Requires wxTextFile. -#define wxUSE_INTL 1 - -// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which -// allow to manipulate dates, times and time intervals. wxDateTime replaces the -// old wxTime and wxDate classes which are still provided for backwards -// compatibility (and implemented in terms of wxDateTime). -// -// Note that this class is relatively new and is still officially in alpha -// stage because some features are not yet (fully) implemented. It is already -// quite useful though and should only be disabled if you are aiming at -// absolutely minimal version of the library. -// -// Requires: wxUSE_LONGLONG -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_DATETIME 1 - -// Set wxUSE_TIMER to 1 to compile wxTimer class -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_TIMER 1 - -// Use wxStopWatch clas. -// -// Default is 1 -// -// Recommended setting: 1 (needed by wxSocket) -#define wxUSE_STOPWATCH 1 - -// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes -// which allow the application to store its settings in the persistent -// storage. Setting this to 1 will also enable on-demand creation of the -// global config object in wxApp. -// -// See also wxUSE_CONFIG_NATIVE below. -// -// Recommended setting: 1 -#define wxUSE_CONFIG 1 - -// If wxUSE_CONFIG is 1, you may choose to use either the native config -// classes under Windows (using .INI files under Win16 and the registry under -// Win32) or the portable text file format used by the config classes under -// Unix. -// -// Default is 1 to use native classes. Note that you may still use -// wxFileConfig even if you set this to 1 - just the config object created by -// default for the applications needs will be a wxRegConfig or wxIniConfig and -// not wxFileConfig. -// -// Recommended setting: 1 -#define wxUSE_CONFIG_NATIVE 1 - -// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows -// to connect/disconnect from the network and be notified whenever the dial-up -// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_DIALUP_MANAGER 1 - -// Compile in classes for run-time DLL loading and function calling. -// Required by wxUSE_DIALUP_MANAGER. -// -// This setting is for Win32 only -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_DYNLIB_CLASS 1 - -// experimental, don't use for now -#define wxUSE_DYNAMIC_LOADER 1 - -// Set to 1 to use socket classes -#define wxUSE_SOCKETS 1 - -// Set to 1 to enable virtual file systems (required by wxHTML) -#define wxUSE_FILESYSTEM 1 - -// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) -#define wxUSE_FS_ZIP 1 - -// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM) -#define wxUSE_FS_ARCHIVE 1 - -// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) -#define wxUSE_FS_INET 1 - -// wxArchive classes for accessing archives such as zip and tar -#define wxUSE_ARCHIVE_STREAMS 1 - -// Set to 1 to compile wxZipInput/OutputStream classes. -#define wxUSE_ZIPSTREAM 1 - -// Set to 1 to compile wxTarInput/OutputStream classes. -#define wxUSE_TARSTREAM 1 - -// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by -// wxUSE_LIBPNG -#define wxUSE_ZLIB 1 - -// If enabled, the code written by Apple will be used to write, in a portable -// way, float on the disk. See extended.c for the license which is different -// from wxWidgets one. -// -// Default is 1. -// -// Recommended setting: 1 unless you don't like the license terms (unlikely) -#define wxUSE_APPLE_IEEE 1 - -// Joystick support class -#define wxUSE_JOYSTICK 1 - -// wxFontEnumerator class -#define wxUSE_FONTENUM 1 - -// wxFontMapper class -#define wxUSE_FONTMAP 1 - -// wxMimeTypesManager class -#define wxUSE_MIMETYPE 1 - -// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP -// or wxURL you need to set this to 1. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_PROTOCOL 1 - -// The settings for the individual URL schemes -#define wxUSE_PROTOCOL_FILE 1 -#define wxUSE_PROTOCOL_FTP 1 -#define wxUSE_PROTOCOL_HTTP 1 - -// Define this to use wxURL class. -#define wxUSE_URL 1 - -// Define this to use native platform url and protocol support. -// Currently valid only for MS-Windows. -// Note: if you set this to 1, you can open ftp/http/gopher sites -// and obtain a valid input stream for these sites -// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0. -// Doing so reduces the code size. -// -// This code is experimental and subject to change. -#define wxUSE_URL_NATIVE 0 - -// Support for wxVariant class used in several places throughout the library, -// notably in wxDataViewCtrl API. -// -// Default is 1. -// -// Recommended setting: 1 unless you want to reduce the library size as much as -// possible in which case setting this to 0 can gain up to 100KB. -#define wxUSE_VARIANT 1 - -// Support for regular expression matching via wxRegEx class: enable this to -// use POSIX regular expressions in your code. You need to compile regex -// library from src/regex to use it under Windows. -// -// Default is 0 -// -// Recommended setting: 1 if your compiler supports it, if it doesn't please -// contribute us a makefile for src/regex for it -#define wxUSE_REGEX 1 - -// wxSystemOptions class -#define wxUSE_SYSTEM_OPTIONS 1 - -// wxSound class -#define wxUSE_SOUND 1 - -// Use wxMediaCtrl -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_MEDIACTRL 1 - -// Use GStreamer for Unix (req a lot of dependancies) -// -// Default is 0 -// -// Recommended setting: 1 (wxMediaCtrl won't work by default without it) -#define wxUSE_GSTREAMER 0 - -// Use wxWidget's XRC XML-based resource system. Recommended. -// -// Default is 1 -// -// Recommended setting: 1 (requires wxUSE_XML) -#define wxUSE_XRC 1 - -// XML parsing classes. Note that their API will change in the future, so -// using wxXmlDocument and wxXmlNode in your app is not recommended. -// -// Default is the same as wxUSE_XRC, i.e. 1 by default. -// -// Recommended setting: 1 (required by XRC) -#define wxUSE_XML wxUSE_XRC - -// Use wxWidget's AUI docking system -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_AUI 1 - -// Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla. -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_STC 1 - - -// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced -// 2D drawing API. (Still somewhat experimental) -// -// Please note that on Windows you will need to link with gdiplus.lib (use -// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your -// application if you want it to be runnable on pre-XP systems. -// -// Default is 0 -// -// Recommended setting: 1 -#ifndef wxUSE_GRAPHICS_CONTEXT -#define wxUSE_GRAPHICS_CONTEXT 0 -#endif - -// ---------------------------------------------------------------------------- -// Individual GUI controls -// ---------------------------------------------------------------------------- - -// You must set wxUSE_CONTROLS to 1 if you are using any controls at all -// (without it, wxControl class is not compiled) -// -// Default is 1 -// -// Recommended setting: 1 (don't change except for very special programs) -#define wxUSE_CONTROLS 1 - -// wxPopupWindow class is a top level transient window. It is currently used -// to implement wxTipWindow -// -// Default is 1 -// -// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) -#define wxUSE_POPUPWIN 1 - -// wxTipWindow allows to implement the custom tooltips, it is used by the -// context help classes. Requires wxUSE_POPUPWIN. -// -// Default is 1 -// -// Recommended setting: 1 (may be set to 0) -#define wxUSE_TIPWINDOW 1 - -// Each of the settings below corresponds to one wxWidgets control. They are -// all switched on by default but may be disabled if you are sure that your -// program (including any standard dialogs it can show!) doesn't need them and -// if you desperately want to save some space. If you use any of these you must -// set wxUSE_CONTROLS as well. -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl -#define wxUSE_BUTTON 1 // wxButton -#define wxUSE_BMPBUTTON 1 // wxBitmapButton -#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl -#define wxUSE_CHECKBOX 1 // wxCheckBox -#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) -#define wxUSE_CHOICE 1 // wxChoice -#define wxUSE_COLLPANE 1 // wxCollapsiblePane -#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl -#define wxUSE_COMBOBOX 1 // wxComboBox -#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl -#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl -#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl -#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox -#define wxUSE_FILECTRL 1 // wxFileCtrl -#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl -#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl -#define wxUSE_GAUGE 1 // wxGauge -#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl -#define wxUSE_LISTBOX 1 // wxListBox -#define wxUSE_LISTCTRL 1 // wxListCtrl -#define wxUSE_RADIOBOX 1 // wxRadioBox -#define wxUSE_RADIOBTN 1 // wxRadioButton -#define wxUSE_SCROLLBAR 1 // wxScrollBar -#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl -#define wxUSE_SLIDER 1 // wxSlider -#define wxUSE_SPINBTN 1 // wxSpinButton -#define wxUSE_SPINCTRL 1 // wxSpinCtrl -#define wxUSE_STATBOX 1 // wxStaticBox -#define wxUSE_STATLINE 1 // wxStaticLine -#define wxUSE_STATTEXT 1 // wxStaticText -#define wxUSE_STATBMP 1 // wxStaticBitmap -#define wxUSE_TEXTCTRL 1 // wxTextCtrl -#define wxUSE_TOGGLEBTN 1 // requires wxButton -#define wxUSE_TREECTRL 1 // wxTreeCtrl - -// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR -// below either wxStatusBar95 or a generic wxStatusBar will be used. -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_STATUSBAR 1 - -// Two status bar implementations are available under Win32: the generic one -// or the wrapper around native control. For native look and feel the native -// version should be used. -// -// Default is 1 for the platforms where native status bar is supported. -// -// Recommended setting: 1 (there is no advantage in using the generic one) -#define wxUSE_NATIVE_STATUSBAR 1 - -// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar -// classes at all. Otherwise, use the native toolbar class unless -// wxUSE_TOOLBAR_NATIVE is 0. -// -// Default is 1 for all settings. -// -// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. -#define wxUSE_TOOLBAR 1 -#define wxUSE_TOOLBAR_NATIVE 1 - -// wxNotebook is a control with several "tabs" located on one of its sides. It -// may be used to logically organise the data presented to the user instead of -// putting everything in one huge dialog. It replaces wxTabControl and related -// classes of wxWin 1.6x. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_NOTEBOOK 1 - -// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of -// the tabs -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_LISTBOOK 1 - -// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of -// the tabs -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_CHOICEBOOK 1 - -// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of -// the tabs -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_TREEBOOK 1 - -// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of -// tabs -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_TOOLBOOK 1 - -// wxTabDialog is a generic version of wxNotebook but it is incompatible with -// the new class. It shouldn't be used in new code. -// -// Default is 0. -// -// Recommended setting: 0 (use wxNotebook) -#define wxUSE_TAB_DIALOG 0 - -// wxTaskBarIcon is a small notification icon shown in the system toolbar or -// dock. -// -// Default is 1. -// -// Recommended setting: 1 (but can be set to 0 if you don't need it) -#define wxUSE_TASKBARICON 1 - -// wxGrid class -// -// Default is 1, set to 0 to cut down compilation time and binaries size if you -// don't use it. -// -// Recommended setting: 1 -// -#define wxUSE_GRID 1 - -// wxMiniFrame class: a frame with narrow title bar -// -// Default is 1. -// -// Recommended setting: 1 (it doesn't cost almost anything) -#define wxUSE_MINIFRAME 1 - -// wxComboCtrl and related classes: combobox with custom popup window and -// not necessarily a listbox. -// -// Default is 1. -// -// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it -// it used by wxComboBox -#define wxUSE_COMBOCTRL 1 - -// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox -// items. -// -// Default is 1. -// -// Recommended setting: 1 but can be safely set to 0, except where it is -// needed as a base class for generic wxBitmapComboBox. -#define wxUSE_ODCOMBOBOX 1 - -// wxBitmapComboBox is a combobox that can have images in front of text items. -// -// Default is 1. -// -// Recommended setting: 1 but can be safely set to 0 -#define wxUSE_BITMAPCOMBOBOX 1 - -// ---------------------------------------------------------------------------- -// Miscellaneous GUI stuff -// ---------------------------------------------------------------------------- - -// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) -#define wxUSE_ACCEL 1 - -// Hotkey support (currently Windows only) -#define wxUSE_HOTKEY 1 - -// Use wxCaret: a class implementing a "cursor" in a text control (called caret -// under Windows). -// -// Default is 1. -// -// Recommended setting: 1 (can be safely set to 0, not used by the library) -#define wxUSE_CARET 1 - -// Use wxDisplay class: it allows enumerating all displays on a system and -// their geometries as well as finding the display on which the given point or -// window lies. -// -// Default is 1. -// -// Recommended setting: 1 if you need it, can be safely set to 0 otherwise -#define wxUSE_DISPLAY 1 - -// Miscellaneous geometry code: needed for Canvas library -#define wxUSE_GEOMETRY 1 - -// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and -// wxListCtrl. -// -// Default is 1. -// -// Recommended setting: 1 (set it to 0 if you don't use any of the controls -// enumerated above, then this class is mostly useless too) -#define wxUSE_IMAGLIST 1 - -// Use wxMenu, wxMenuBar, wxMenuItem. -// -// Default is 1. -// -// Recommended setting: 1 (can't be disabled under MSW) -#define wxUSE_MENUS 1 - -// Use wxSashWindow class. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_SASH 1 - -// Use wxSplitterWindow class. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_SPLITTER 1 - -// Use wxToolTip and wxWindow::Set/GetToolTip() methods. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_TOOLTIPS 1 - -// wxValidator class and related methods -#define wxUSE_VALIDATORS 1 - -// ---------------------------------------------------------------------------- -// common dialogs -// ---------------------------------------------------------------------------- - -// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g. -// file selector, printer dialog). Switching this off also switches off the -// printing architecture and interactive wxPrinterDC. -// -// Default is 1 -// -// Recommended setting: 1 (unless it really doesn't work) -#define wxUSE_COMMON_DIALOGS 1 - -// wxBusyInfo displays window with message when app is busy. Works in same way -// as wxBusyCursor -#define wxUSE_BUSYINFO 1 - -// Use single/multiple choice dialogs. -// -// Default is 1 -// -// Recommended setting: 1 (used in the library itself) -#define wxUSE_CHOICEDLG 1 - -// Use colour picker dialog -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_COLOURDLG 1 - -// wxDirDlg class for getting a directory name from user -#define wxUSE_DIRDLG 1 - -// TODO: setting to choose the generic or native one - -// Use file open/save dialogs. -// -// Default is 1 -// -// Recommended setting: 1 (used in many places in the library itself) -#define wxUSE_FILEDLG 1 - -// Use find/replace dialogs. -// -// Default is 1 -// -// Recommended setting: 1 (but may be safely set to 0) -#define wxUSE_FINDREPLDLG 1 - -// Use font picker dialog -// -// Default is 1 -// -// Recommended setting: 1 (used in the library itself) -#define wxUSE_FONTDLG 1 - -// Use wxMessageDialog and wxMessageBox. -// -// Default is 1 -// -// Recommended setting: 1 (used in the library itself) -#define wxUSE_MSGDLG 1 - -// progress dialog class for lengthy operations -#define wxUSE_PROGRESSDLG 1 - -// support for startup tips (wxShowTip &c) -#define wxUSE_STARTUP_TIPS 1 - -// text entry dialog and wxGetTextFromUser function -#define wxUSE_TEXTDLG 1 - -// number entry dialog -#define wxUSE_NUMBERDLG 1 - -// splash screen class -#define wxUSE_SPLASH 1 - -// wizards -#define wxUSE_WIZARDDLG 1 - -// Compile in wxAboutBox() function showing the standard "About" dialog. -// -// Default is 1 -// -// Recommended setting: 1 but can be set to 0 to save some space if you don't -// use this function -#define wxUSE_ABOUTDLG 1 - -// ---------------------------------------------------------------------------- -// Metafiles support -// ---------------------------------------------------------------------------- - -// Windows supports the graphics format known as metafile which is, though not -// portable, is widely used under Windows and so is supported by wxWin (under -// Windows only, of course). Win16 (Win3.1) used the so-called "Window -// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in -// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by -// default, WMFs will be used under Win16 and EMFs under Win32. This may be -// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting -// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile -// in any metafile related classes at all. -// -// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS. -// -// Recommended setting: default or 0 for everything for portable programs. -#define wxUSE_METAFILE 1 -#define wxUSE_ENH_METAFILE 1 -#define wxUSE_WIN_METAFILES_ALWAYS 0 - -// ---------------------------------------------------------------------------- -// Big GUI components -// ---------------------------------------------------------------------------- - -// Set to 0 to disable MDI support. -// -// Requires wxUSE_NOTEBOOK under platforms other than MSW. -// -// Default is 1. -// -// Recommended setting: 1, can be safely set to 0. -#define wxUSE_MDI 1 - -// Set to 0 to disable document/view architecture -#define wxUSE_DOC_VIEW_ARCHITECTURE 1 - -// Set to 0 to disable MDI document/view architecture -// -// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE -#define wxUSE_MDI_ARCHITECTURE 1 - -// Set to 0 to disable print/preview architecture code -#define wxUSE_PRINTING_ARCHITECTURE 1 - -// wxHTML sublibrary allows to display HTML in wxWindow programs and much, -// much more. -// -// Default is 1. -// -// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a -// smaller library. -#define wxUSE_HTML 1 - -// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL -// headers and libraries to be able to compile the library with wxUSE_GLCANVAS -// set to 1. Note that for some compilers (notably Microsoft Visual C++) you -// will need to manually add opengl32.lib and glu32.lib to the list of -// libraries linked with your program if you use OpenGL. -// -// Default is 0. -// -// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise -#define wxUSE_GLCANVAS 0 - -// wxRichTextCtrl allows editing of styled text. -// -// Default is 1. -// -// Recommended setting: 1, set to 0 if you want compile a -// smaller library. -#define wxUSE_RICHTEXT 1 - -// ---------------------------------------------------------------------------- -// Data transfer -// ---------------------------------------------------------------------------- - -// Use wxClipboard class for clipboard copy/paste. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_CLIPBOARD 1 - -// Use wxDataObject and related classes. Needed for clipboard and OLE drag and -// drop -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_DATAOBJ 1 - -// Use wxDropTarget and wxDropSource classes for drag and drop (this is -// different from "built in" drag and drop in wxTreeCtrl which is always -// available). Requires wxUSE_DATAOBJ. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_DRAG_AND_DROP 1 - -// Use wxAccessible for enhanced and customisable accessibility. -// Depends on wxUSE_OLE. -// -// Default is 0. -// -// Recommended setting (at present): 0 -#define wxUSE_ACCESSIBILITY 0 - -// ---------------------------------------------------------------------------- -// miscellaneous settings -// ---------------------------------------------------------------------------- - -// wxSingleInstanceChecker class allows to verify at startup if another program -// instance is running (it is only available under Win32) -// -// Default is 1 -// -// Recommended setting: 1 (the class is tiny, disabling it won't save much -// space) -#define wxUSE_SNGLINST_CHECKER 1 - -#define wxUSE_DRAGIMAGE 1 - -#define wxUSE_IPC 1 - // 0 for no interprocess comms -#define wxUSE_HELP 1 - // 0 for no help facility - -// Should we use MS HTML help for wxHelpController? If disabled, neither -// wxCHMHelpController nor wxBestHelpController are available. -// -// Default is 1 under MSW, 0 is always used for the other platforms. -// -// Recommended setting: 1, only set to 0 if you have trouble compiling -// wxCHMHelpController (could be a problem with really ancient compilers) -#define wxUSE_MS_HTML_HELP 1 - - -// Use wxHTML-based help controller? -#define wxUSE_WXHTML_HELP 1 - -#define wxUSE_CONSTRAINTS 1 - // 0 for no window layout constraint system - -#define wxUSE_SPLINES 1 - // 0 for no splines - -#define wxUSE_MOUSEWHEEL 1 - // Include mouse wheel support - -// ---------------------------------------------------------------------------- -// wxDC classes for various output formats -// ---------------------------------------------------------------------------- - -// Set to 1 for PostScript device context. -#define wxUSE_POSTSCRIPT 0 - -// Set to 1 to use font metric files in GetTextExtent -#define wxUSE_AFM_FOR_POSTSCRIPT 1 - -// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows -// to create fiels in SVG (Scalable Vector Graphics) format. -#define wxUSE_SVG 1 - -// ---------------------------------------------------------------------------- -// other compiler (mis)features -// ---------------------------------------------------------------------------- - -// Set this to 0 if your compiler can't cope with omission of prototype -// parameters. -// -// Default is 1. -// -// Recommended setting: 1 (should never need to set this to 0) -#define REMOVE_UNUSED_ARG 1 - -// VC++ 4.2 and above allows and but you can't mix -// them. Set to 1 for , 0 for . Note that VC++ 7.1 -// and later doesn't support wxUSE_IOSTREAMH == 1 and so will be -// used anyhow. -// -// Default is 1. -// -// Recommended setting: whatever your compiler likes more -#define wxUSE_IOSTREAMH 1 - -// ---------------------------------------------------------------------------- -// image format support -// ---------------------------------------------------------------------------- - -// wxImage supports many different image formats which can be configured at -// compile-time. BMP is always supported, others are optional and can be safely -// disabled if you don't plan to use images in such format sometimes saving -// substantial amount of code in the final library. -// -// Some formats require an extra library which is included in wxWin sources -// which is mentioned if it is the case. - -// Set to 1 for wxImage support (recommended). -#define wxUSE_IMAGE 1 - -// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. -#define wxUSE_LIBPNG 1 - -// Set to 1 for JPEG format support (requires libjpeg) -#define wxUSE_LIBJPEG 1 - -// Set to 1 for TIFF format support (requires libtiff) -#define wxUSE_LIBTIFF 1 - -// Set to 1 for TGA format support (loading only) -#define wxUSE_TGA 1 - -// Set to 1 for GIF format support -#define wxUSE_GIF 1 - -// Set to 1 for PNM format support -#define wxUSE_PNM 1 - -// Set to 1 for PCX format support -#define wxUSE_PCX 1 - -// Set to 1 for IFF format support (Amiga format) -#define wxUSE_IFF 0 - -// Set to 1 for XPM format support -#define wxUSE_XPM 1 - -// Set to 1 for MS Icons and Cursors format support -#define wxUSE_ICO_CUR 1 - -// Set to 1 to compile in wxPalette class -#define wxUSE_PALETTE 1 - -// ---------------------------------------------------------------------------- -// wxUniversal-only options -// ---------------------------------------------------------------------------- - -// Set to 1 to enable compilation of all themes, this is the default -#define wxUSE_ALL_THEMES 1 - -// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES -// is unset, if it is set these options are not used; notice that metal theme -// uses Win32 one -#define wxUSE_THEME_GTK 0 -#define wxUSE_THEME_METAL 0 -#define wxUSE_THEME_MONO 0 -#define wxUSE_THEME_WIN32 0 +///////////////////////////////////////////////////////////////////////////// +#ifndef _WX_SETUP_H_ +#define _WX_SETUP_H_ +/* --- start common options --- */ // ---------------------------------------------------------------------------- // global settings // ---------------------------------------------------------------------------- @@ -1351,29 +146,15 @@ // Unicode support // ---------------------------------------------------------------------------- -// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be -// defined as wchar_t, wxString will use Unicode internally. If you set this -// to 1, you must use wxT() macro for all literal strings in the program. -// -// Unicode is currently only fully supported under Windows NT/2000/XP -// (Windows 9x doesn't support it and the programs compiled in Unicode mode -// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). -// -// Default is 0 (but only because of makefiles) -// -// Recommended setting: 1 +// These settings are obsolete: the library is always built in Unicode mode +// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if +// absolutely necessary -- updating it is strongly recommended as the ANSI mode +// will disappear completely in future wxWidgets releases. #ifndef wxUSE_UNICODE - #define wxUSE_UNICODE 0 + #define wxUSE_UNICODE 1 #endif -// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without -// compiling the program in Unicode mode. More precisely, it will be possible -// to construct wxString from a wide (Unicode) string and convert any wxString -// to Unicode. -// -// Default is 1 -// -// Recommended setting: 1 +// wxUSE_WCHAR_T is required by wxWidgets now, don't change. #define wxUSE_WCHAR_T 1 // ---------------------------------------------------------------------------- @@ -1658,6 +439,17 @@ // Set to 1 to use socket classes #define wxUSE_SOCKETS 1 +// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS) +// +// Notice that currently setting this option under Windows will result in +// programs which can only run on recent OS versions (with ws2_32.dll +// installed) which is why it is disabled by default. +// +// Default is 1. +// +// Recommended setting: 1 if you need IPv6 support +#define wxUSE_IPV6 0 + // Set to 1 to enable virtual file systems (required by wxHTML) #define wxUSE_FILESYSTEM 1 @@ -1902,7 +694,7 @@ // // Recommended setting: 1 (there is no advantage in using the generic one) #define wxUSE_NATIVE_STATUSBAR 1 - + // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless // wxUSE_TOOLBAR_NATIVE is 0. @@ -2058,6 +850,17 @@ // Recommended setting: 1 (can't be disabled under MSW) #define wxUSE_MENUS 1 +// Use wxNotificationMessage. +// +// wxNotificationMessage allows to show non-intrusive messages to the user +// using balloons, banners, popups or whatever is the appropriate method for +// the current platform. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_NOTIFICATION_MESSAGE 1 + // Use wxSashWindow class. // // Default is 1. @@ -2082,6 +885,20 @@ // wxValidator class and related methods #define wxUSE_VALIDATORS 1 +// Use reference counted ID management: this means that wxWidgets will track +// the automatically allocated ids (those used when you use wxID_ANY when +// creating a window, menu or toolbar item &c) instead of just supposing that +// the program never runs out of them. This is mostly useful only under wxMSW +// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where +// long-running programs can run into problems with ids reuse without this. On +// the other platforms, where the ids have the full int range, this shouldn't +// be necessary. +#ifdef __WXMSW__ +#define wxUSE_AUTOID_MANAGEMENT 1 +#else +#define wxUSE_AUTOID_MANAGEMENT 0 +#endif + // ---------------------------------------------------------------------------- // common dialogs // ---------------------------------------------------------------------------- @@ -2286,7 +1103,7 @@ // ---------------------------------------------------------------------------- // wxSingleInstanceChecker class allows to verify at startup if another program -// instance is running (it is only available under Win32) +// instance is running. // // Default is 1 // @@ -2423,6 +1240,9 @@ #define wxUSE_THEME_WIN32 0 +/* --- end common options --- */ + +/* --- start MSW options --- */ // ---------------------------------------------------------------------------- // Windows-only settings // ---------------------------------------------------------------------------- @@ -2525,6 +1345,15 @@ // Recommended setting: 1, set to 0 for a small library size reduction #define wxUSE_OWNER_DRAWN 1 +// Set this to 1 to enable MSW-specific wxTaskBarIcon::ShowBalloon() method. It +// is required by native wxNotificationMessage implementation. +// +// Default is 1 but disabled in wx/msw/chkconf.h if SDK is too old to contain +// the necessary declarations. +// +// Recommended setting: 1, set to 0 for a tiny library size reduction +#define wxUSE_TASKBARICON_BALLOONS 1 + // Set to 1 to compile MS Windows XP theme engine support #define wxUSE_UXTHEME 1 @@ -2561,3 +1390,24 @@ // // Recommended setting: 1, set to 0 if your programs never crash #define wxUSE_CRASHREPORT 1 +/* --- end MSW options --- */ + +/* --- start wxUniv options --- */ +// ---------------------------------------------------------------------------- +// wxUniversal-only options +// ---------------------------------------------------------------------------- + +// Set to 1 to enable compilation of all themes, this is the default +#define wxUSE_ALL_THEMES 1 + +// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES +// is unset, if it is set these options are not used; notice that metal theme +// uses Win32 one +#define wxUSE_THEME_GTK 0 +#define wxUSE_THEME_METAL 0 +#define wxUSE_THEME_MONO 0 +#define wxUSE_THEME_WIN32 0 +/* --- end wxUniv options --- */ + +#endif // _WX_SETUP_H_ + diff --git a/include/wx/univ/setup_inc.h b/include/wx/univ/setup_inc.h new file mode 100644 index 0000000000..ef6e70bbb3 --- /dev/null +++ b/include/wx/univ/setup_inc.h @@ -0,0 +1,26 @@ +///////////////////////////////////////////////////////////////////////////// +// Name: wx/univ/setup_inc.h +// Purpose: wxUniversal-specific setup.h options (this file is not used +// directly, it is injected by build/update-setup-h in the +// generated include/wx/univ/setup0.h) +// Author: Vadim Zeitlin +// Created: 2008-02-03 +// RCS-ID: $Id$ +// Copyright: (c) 2008 Vadim Zeitlin +// Licence: wxWindows licence +///////////////////////////////////////////////////////////////////////////// + +// ---------------------------------------------------------------------------- +// wxUniversal-only options +// ---------------------------------------------------------------------------- + +// Set to 1 to enable compilation of all themes, this is the default +#define wxUSE_ALL_THEMES 1 + +// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES +// is unset, if it is set these options are not used; notice that metal theme +// uses Win32 one +#define wxUSE_THEME_GTK 0 +#define wxUSE_THEME_METAL 0 +#define wxUSE_THEME_MONO 0 +#define wxUSE_THEME_WIN32 0 -- 2.45.2