X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/efd17a1d4fa08bf549023a1cc74ce98f9db91be3..9ae8168e5b1072e3a401abca3b0f40bc6afcc6ae:/include/wx/msw/setup0.h

diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h
index 8e63f7dc56..70471a1349 100644
--- a/include/wx/msw/setup0.h
+++ b/include/wx/msw/setup0.h
@@ -44,14 +44,6 @@
 // Recommended setting: 0 (please update your code)
 #define WXWIN_COMPATIBILITY_2_4 1
 
-// Define as 1 for font size to be backward compatible to 1.63 and earlier.
-// 1.64 and later define point sizes to be compatible with Windows.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxFONT_SIZE_COMPATIBILITY    0
-
 // Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
 // If migrating between versions, your dialogs may seem to shrink.
 //
@@ -67,7 +59,7 @@
 // Generic comment about debugging settings: they are very useful if you don't
 // use any other memory leak detection tools such as Purify/BoundsChecker, but
 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
 // may prefer to use it instead of built in memory debugging code because it is
 // faster and more fool proof.
 //
@@ -126,7 +118,8 @@
 // Default is 1
 //
 // Recommended setting: 1 if your compiler supports it.
-#ifdef _MSC_VER
+#if defined(_MSC_VER) || \
+    (defined(__BORLANDC__) && __BORLANDC__ >= 0x0550)
     #define wxUSE_ON_FATAL_EXCEPTION 1
 #else
     #define wxUSE_ON_FATAL_EXCEPTION 0
@@ -136,7 +129,7 @@
 // Unicode support
 // ----------------------------------------------------------------------------
 
-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
 // defined as wchar_t, wxString will use Unicode internally. If you set this
 // to 1, you must use wxT() macro for all literal strings in the program.
 //
@@ -151,7 +144,7 @@
     #define wxUSE_UNICODE 0
 #endif
 
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
 // and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
@@ -253,7 +246,7 @@
 // Recommended setting: 0 unless you do plan to develop MT applications
 #define wxUSE_THREADS 1
 
-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes
 #define wxUSE_STREAMS       1
 
 // Use standard C++ streams if 1. If 0, use wxWin streams implementation.
@@ -400,7 +393,7 @@
 
 // If enabled, the code written by Apple will be used to write, in a portable
 // way, float on the disk. See extended.c for the license which is different
-// from wxWindows one.
+// from wxWidgets one.
 //
 // Default is 1.
 //
@@ -458,13 +451,45 @@
 // wxSound class
 #define wxUSE_SOUND      1
 
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1 
+#define wxUSE_MEDIACTRL     1
+
+// Use QuickTime
+//
+// Default is 0
+//
+// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
+#define wxUSE_QUICKTIME     0
+
+// Use DirectShow (requires linkage to strmiids.lib)
+//
+// Default is 0
+//
+// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
+#define wxUSE_DIRECTSHOW    0
+
+// Use wxWidget's XRC XML-based resource system.  Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC       1
+
 // XML parsing classes. Note that their API will change in the future, so
 // using wxXmlDocument and wxXmlNode in your app is not recommended.
 //
 // Default is 1
 //
-// Recommended setting: 1 (needed by XRC)
-#define wxUSE_XML       1
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+#  define wxUSE_XML       1
+#else
+#  define wxUSE_XML       0
+#endif
 
 // ----------------------------------------------------------------------------
 // Individual GUI controls
@@ -494,7 +519,7 @@
 // Recommended setting: 1 (may be set to 0)
 #define wxUSE_TIPWINDOW    1
 
-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are
 // all switched on by default but may be disabled if you are sure that your
 // program (including any standard dialogs it can show!) doesn't need them and
 // if you desperately want to save some space. If you use any of these you must
@@ -554,11 +579,8 @@
 #define wxUSE_TOOLBAR 1
 #define wxUSE_TOOLBAR_NATIVE 1
 
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR    1
-
 // wxNotebook is a control with several "tabs" located on one of its sides. It
-// may be used ot logically organise the data presented to the user instead of
+// may be used to logically organise the data presented to the user instead of
 // putting everything in one huge dialog. It replaces wxTabControl and related
 // classes of wxWin 1.6x.
 //
@@ -575,6 +597,14 @@
 // Recommended setting: 1
 #define wxUSE_LISTBOOK 1
 
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
 // the new class. It shouldn't be used in new code.
 //
@@ -674,15 +704,6 @@
 // common dialogs
 // ----------------------------------------------------------------------------
 
-// Define 1 to use generic dialogs in Windows, even though they duplicate
-// native common dialog (e.g. wxColourDialog). This is mainly useful for
-// testing.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 0
-
 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
 // file selector, printer dialog). Switching this off also switches off the
 // printing architecture and interactive wxPrinterDC.
@@ -1006,7 +1027,7 @@
 // Windows-only settings
 // ----------------------------------------------------------------------------
 
-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
 // will override some other settings (see below)
 //
 // Default is 0.