X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/dffd81262026d5f375a9acd0dcf131a1b201943d..b8e7b6738fe00529fdeae26e6cfea1ccc2a00a76:/include/wx/msw/setup0.h diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h index f5cab0b6e9..e3a05aec7e 100644 --- a/include/wx/msw/setup0.h +++ b/include/wx/msw/setup0.h @@ -6,7 +6,7 @@ // Created: 01/02/97 // RCS-ID: $Id$ // Copyright: (c) Julian Smart -// Licence: wxWindows license +// Licence: wxWindows licence ///////////////////////////////////////////////////////////////////////////// #ifndef _WX_SETUP_H_ @@ -26,28 +26,23 @@ // compatibility settings // ---------------------------------------------------------------------------- -// This setting determines the compatibility with 1.68 API: -// Level 0: no backward compatibility, all new features -// Level 1: some extra methods are defined for compatibility. +// This setting determines the compatibility with 2.2 API: set it to 1 to +// enable it but please consider updating your code instead. // -// Default is 0. +// Default is 0 // -// Recommended setting: 0 (in fact the compatibility code is now very minimal -// so there is little advantage to setting it to 1. -#define WXWIN_COMPATIBILITY 0 +// Recommended setting: 0 (please update your code) +#define WXWIN_COMPATIBILITY_2_2 0 -// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap, -// but this is very dangerous because you can mistakenly pass an icon instead -// of a bitmap to a function taking "const wxBitmap&" - which will *not* work -// because an icon is not a valid bitmap +// This setting determines the compatibility with 2.4 API: set it to 0 to +// flag all cases of using deprecated functions. // -// Starting from 2.1.12, you have the choice under this backwards compatible -// behaviour (your code will still compile, but probably won't behave as -// expected!) and not deriving wxIcon class from wxBitmap, but providing a -// conversion ctor wxBitmap(const wxIcon&) instead. +// Default is 1 but please try building your code with 0 as the default will +// change to 0 in the next version and the deprecated functions will disappear +// in the version after it completely. // -// Recommended setting: 0 -#define wxICON_IS_BITMAP 0 +// Recommended setting: 0 (please update your code) +#define WXWIN_COMPATIBILITY_2_4 1 // Define as 1 for font size to be backward compatible to 1.63 and earlier. // 1.64 and later define point sizes to be compatible with Windows. @@ -81,14 +76,12 @@ // and if __NO_VC_CRTDBG__ is not defined. // If 1, enables wxDebugContext, for writing error messages to file, etc. If -// __WXDEBUG__ is not defined, will still use normal memory operators. It's -// recommended to set this to 1, since you may well need to output an error log -// in a production version (or non-debugging beta). +// __WXDEBUG__ is not defined, will still use the normal memory operators. // -// Default is 1. +// Default is 0 // -// Recommended setting: 1 but see comment above -#define wxUSE_DEBUG_CONTEXT 1 +// Recommended setting: 0 +#define wxUSE_DEBUG_CONTEXT 0 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* // __WXDEBUG__ is also defined. @@ -96,29 +89,31 @@ // WARNING: this code may not work with all architectures, especially if // alignment is an issue. This switch is currently ignored for mingw / cygwin // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_MEMORY_TRACING 1 +// Recommended setting: 1 if you are not using a memory debugging tool, else 0 +#define wxUSE_MEMORY_TRACING 0 // In debug mode, cause new and delete to be redefined globally. -// If this causes problems (e.g. link errors), set this to 0. +// If this causes problems (e.g. link errors which is a common problem +// especially if you use another library which also redefines the global new +// and delete), set this to 0. // This switch is currently ignored for mingw / cygwin // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_GLOBAL_MEMORY_OPERATORS 1 +// Recommended setting: 0 +#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If // this causes problems (e.g. link errors), set this to 0. You may need to set // this to 0 if using templates (at least for VC++). This switch is currently -// ignored for mingw / cygwin +// ignored for mingw / cygwin / CodeWarrior // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_DEBUG_NEW_ALWAYS 1 +// Recommended setting: 0 +#define wxUSE_DEBUG_NEW_ALWAYS 0 // wxHandleFatalExceptions() may be used to catch the program faults at run // time and, instead of terminating the program with a usual GPF message box, @@ -145,14 +140,32 @@ // defined as wchar_t, wxString will use Unicode internally. If you set this // to 1, you must use wxT() macro for all literal strings in the program. // -// Unicode is currently only fully supported under Windows NT/2000 (Windows 9x -// doesn't support it and the programs compiled in Unicode mode will not run -// under 9x). +// Unicode is currently only fully supported under Windows NT/2000/XP +// (Windows 9x doesn't support it and the programs compiled in Unicode mode +// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). +// +// Default is 0 +// +// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) +#ifndef wxUSE_UNICODE + #define wxUSE_UNICODE 0 +#endif + +// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode +// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. +// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see +// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note +// that you will have to modify the makefiles to include unicows.lib import +// library as the first library (see installation instructions in install.txt +// to learn how to do it when building the library or samples). +// +// If your compiler doesn't have unicows.lib, you can get a version of it at +// http://libunicows.sourceforge.net // // Default is 0 // -// Recommended setting: 0 (unless you only plan to use Windows NT/2000) -#define wxUSE_UNICODE 0 +// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems) +#define wxUSE_UNICODE_MSLU 0 // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without // compiling the program in Unicode mode. More precisely, it will be possible @@ -168,6 +181,40 @@ // global features // ---------------------------------------------------------------------------- +// Compile library in exception-safe mode? If set to 1, the library will try to +// behave correctly in presence of exceptions (even though it still will not +// use the exceptions itself) and notify the user code about any unhandled +// exceptions. If set to 0, propagation of the exceptions through the library +// code will lead to undefined behaviour -- but the code itself will be +// slightly smaller and faster. +// +// Default is 1 +// +// Recommended setting: depends on whether you intend to use C++ exceptions +// in your own code (1 if you do, 0 if you don't) +#define wxUSE_EXCEPTIONS 1 + +// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI +// +// Default is 0 +// +// Recommended setting: 0 +#define wxUSE_EXTENDED_RTTI 0 + +#if defined(__BORLANDC__) +#undef wxUSE_EXTENDED_RTTI +#define wxUSE_EXTENDED_RTTI 1 +#endif + +// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from +// std::list and std::vector, with a compatibility interface, +// and for wxHashMap to be implemented with templates. +// +// Default is 0 +// +// Recommended setting: YMMV +#define wxUSE_STL 0 + // Support for message/error logging. This includes wxLogXXX() functions and // wxLog and derived classes. Don't set this to 0 unless you really know what // you are doing. @@ -177,6 +224,22 @@ // Recommended setting: 1 (always) #define wxUSE_LOG 1 +// Recommended setting: 1 +#define wxUSE_LOGWINDOW 1 + +// Recommended setting: 1 +#define wxUSE_LOGGUI 1 + +// Recommended setting: 1 +#define wxUSE_LOG_DIALOG 1 + +// Support for command line parsing using wxCmdLineParser class. +// +// Default is 1 +// +// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) +#define wxUSE_CMDLINE_PARSER 1 + // Support for multithreaded applications: if 1, compile in thread classes // (thread.h) and make the library a bit more thread safe. Although thread // support is quite stable by now, you may still consider recompiling the @@ -196,9 +259,6 @@ // Use standard C++ streams if 1. If 0, use wxWin streams implementation. #define wxUSE_STD_IOSTREAM 0 -// Use serialization (requires utils/serialize) -#define wxUSE_SERIAL 0 - // ---------------------------------------------------------------------------- // non GUI features selection // ---------------------------------------------------------------------------- @@ -216,7 +276,34 @@ // Recommended setting: 1 #define wxUSE_LONGLONG 1 -// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which +// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level +// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. +// +// Default is 1 +// +// Recommended setting: 1 (wxFile is highly recommended as it is required by +// i18n code, wxFileConfig and others) +#define wxUSE_FILE 1 +#define wxUSE_FFILE 1 + +// Use wxFSVolume class providing access to the configured/active mount points +// +// Default is 1 +// +// Recommended setting: 1 (but may be safely disabled if you don't use it) +#define wxUSE_FSVOLUME 1 + +// use wxTextBuffer class: required by wxTextFile +#define wxUSE_TEXTBUFFER 1 + +// use wxTextFile class: requires wxFile and wxTextBuffer, required by +// wxFileConfig +#define wxUSE_TEXTFILE 1 + +// i18n support: _() macro, wxLocale class. Requires wxTextFile. +#define wxUSE_INTL 1 + +// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which // allow to manipulate dates, times and time intervals. wxDateTime replaces the // old wxTime and wxDate classes which are still provided for backwards // compatibility (and implemented in terms of wxDateTime). @@ -228,8 +315,24 @@ // // Requires: wxUSE_LONGLONG // +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_DATETIME 1 + +// Set wxUSE_TIMER to 1 to compile wxTimer class +// +// Default is 1 +// // Recommended setting: 1 -#define wxUSE_TIMEDATE 1 +#define wxUSE_TIMER 1 + +// Use wxStopWatch clas. +// +// Default is 1 +// +// Recommended setting: 1 (needed by wxSocket) +#define wxUSE_STOPWATCH 1 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes // which allow the application to store its settings in the persistent @@ -239,7 +342,7 @@ // See also wxUSE_CONFIG_NATIVE below. // // Recommended setting: 1 -#define wxUSE_CONFIG 1 +#define wxUSE_CONFIG 1 // If wxUSE_CONFIG is 1, you may choose to use either the native config // classes under Windows (using .INI files under Win16 and the registry under @@ -256,14 +359,14 @@ // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows // to connect/disconnect from the network and be notified whenever the dial-up -// network connection is established/terminated. Requires wxUSE_DYNLIB_CLASS. +// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. // // Default is 1. // // Recommended setting: 1 #define wxUSE_DIALUP_MANAGER 1 -// Compile in wxLibrary class for run-time DLL loading and function calling. +// Compile in classes for run-time DLL loading and function calling. // Required by wxUSE_DIALUP_MANAGER. // // This setting is for Win32 only @@ -271,7 +374,10 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_DYNLIB_CLASS 1 +#define wxUSE_DYNLIB_CLASS 1 + +// experimental, don't use for now +#define wxUSE_DYNAMIC_LOADER 1 // Set to 1 to use socket classes #define wxUSE_SOCKETS 1 @@ -289,9 +395,12 @@ #define wxUSE_ZIPSTREAM 1 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by -// wxUSE_LIBPNG. +// wxUSE_LIBPNG and wxUSE_GZSTREAM. #define wxUSE_ZLIB 1 +// Set to 1 to compile wxGzipInput/OutputStream classes. Requires wxUSE_ZLIB. +#define wxUSE_GZSTREAM 1 + // If enabled, the code written by Apple will be used to write, in a portable // way, float on the disk. See extended.c for the license which is different // from wxWindows one. @@ -301,36 +410,155 @@ // Recommended setting: 1 unless you don't like the license terms (unlikely) #define wxUSE_APPLE_IEEE 1 -// Use wxFile class. +// Joystick support class +#define wxUSE_JOYSTICK 1 + +// wxFontMapper class +#define wxUSE_FONTMAP 1 + +// wxMimeTypesManager class +#define wxUSE_MIMETYPE 1 + +// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP +// or wxURL you need to set this to 1. // // Default is 1. // -// Recommended setting: 1 (highly recommended, required i18n code, wxConfig...) -#define wxUSE_FILE 1 +// Recommended setting: 1 +#define wxUSE_PROTOCOL 1 -// use wxTextFile class: requires wxFile, required by wxFileConfig -#define wxUSE_TEXTFILE 1 +// The settings for the individual URL schemes +#define wxUSE_PROTOCOL_FILE 1 +#define wxUSE_PROTOCOL_FTP 1 +#define wxUSE_PROTOCOL_HTTP 1 -// i18n support: _() macro, wxLocale class. Requires wxTextFile. -#define wxUSE_INTL 1 +// Define this to use wxURL class. +#define wxUSE_URL 1 + +// Define this to use native platform url and protocol support. +// Currently valid only for MS-Windows. +// Note: if you set this to 1, you can open ftp/http/gopher sites +// and obtain a valid input stream for these sites +// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0. +// Doing so reduces the code size. +// +// This code is experimental and subject to change. +#define wxUSE_URL_NATIVE 0 + +// Support for regular expression matching via wxRegEx class: enable this to +// use POSIX regular expressions in your code. You need to compile regex +// library from src/regex to use it under Windows. +// +// Default is 0 +// +// Recommended setting: 1 if your compiler supports it, if it doesn't please +// contribute us a makefile for src/regex for it +#define wxUSE_REGEX 1 + +// wxSystemOptions class +#define wxUSE_SYSTEM_OPTIONS 1 + +// wxSound class +#define wxUSE_SOUND 1 + +// XML parsing classes. Note that their API will change in the future, so +// using wxXmlDocument and wxXmlNode in your app is not recommended. +// +// Default is 1 +// +// Recommended setting: 1 (needed by XRC) +#define wxUSE_XML 1 // ---------------------------------------------------------------------------- -// Optional controls +// Individual GUI controls // ---------------------------------------------------------------------------- +// You must set wxUSE_CONTROLS to 1 if you are using any controls at all +// (without it, wxControl class is not compiled) +// +// Default is 1 +// +// Recommended setting: 1 (don't change except for very special programs) +#define wxUSE_CONTROLS 1 + +// wxPopupWindow class is a top level transient window. It is currently used +// to implement wxTipWindow +// +// Default is 1 +// +// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) +#define wxUSE_POPUPWIN 1 + +// wxTipWindow allows to implement the custom tooltips, it is used by the +// context help classes. Requires wxUSE_POPUPWIN. +// +// Default is 1 +// +// Recommended setting: 1 (may be set to 0) +#define wxUSE_TIPWINDOW 1 + +// Each of the settings below corresponds to one wxWindows control. They are +// all switched on by default but may be disabled if you are sure that your +// program (including any standard dialogs it can show!) doesn't need them and +// if you desperately want to save some space. If you use any of these you must +// set wxUSE_CONTROLS as well. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_BUTTON 1 // wxButton +#define wxUSE_BMPBUTTON 1 // wxBitmapButton +#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl +#define wxUSE_CHECKBOX 1 // wxCheckBox +#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) +#define wxUSE_CHOICE 1 // wxChoice +#define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_GAUGE 1 // wxGauge +#define wxUSE_LISTBOX 1 // wxListBox +#define wxUSE_LISTCTRL 1 // wxListCtrl +#define wxUSE_RADIOBOX 1 // wxRadioBox +#define wxUSE_RADIOBTN 1 // wxRadioButton +#define wxUSE_SCROLLBAR 1 // wxScrollBar +#define wxUSE_SLIDER 1 // wxSlider +#define wxUSE_SPINBTN 1 // wxSpinButton +#define wxUSE_SPINCTRL 1 // wxSpinCtrl +#define wxUSE_STATBOX 1 // wxStaticBox +#define wxUSE_STATLINE 1 // wxStaticLine +#define wxUSE_STATTEXT 1 // wxStaticText +#define wxUSE_STATBMP 1 // wxStaticBitmap +#define wxUSE_TEXTCTRL 1 // wxTextCtrl +#define wxUSE_TOGGLEBTN 1 // requires wxButton +#define wxUSE_TREECTRL 1 // wxTreeCtrl + +// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR +// below either wxStatusBar95 or a generic wxStatusBar will be used. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_STATUSBAR 1 + +// Two status bar implementations are available under Win32: the generic one +// or the wrapper around native control. For native look and feel the native +// version should be used. +// +// Default is 1. +// +// Recommended setting: 1 (there is no advantage in using the generic one) +#define wxUSE_NATIVE_STATUSBAR 1 + // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless -// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which -// supports some features which might not be supported by the native wxToolBar -// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1. +// wxUSE_TOOLBAR_NATIVE is 0. // // Default is 1 for all settings. // -// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for -// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility). +// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. #define wxUSE_TOOLBAR 1 #define wxUSE_TOOLBAR_NATIVE 1 -#define wxUSE_TOOLBAR_SIMPLE 1 + +// this setting is obsolete, value is ignored +#define wxUSE_BUTTONBAR 1 // wxNotebook is a control with several "tabs" located on one of its sides. It // may be used ot logically organise the data presented to the user instead of @@ -342,65 +570,109 @@ // Recommended setting: 1 #define wxUSE_NOTEBOOK 1 -// The corresponding controls will be compiled in if wxUSE_ is set to -// 1 and not compiled into the library otherwise. -// -// Default is 1 for everything. -// -// Recommended setting: 1 (library might fail to compile for some combinations -// of disabled controls) -#define wxUSE_CARET 1 -#define wxUSE_CHECKBOX 1 -#define wxUSE_CHECKLISTBOX 1 // requires wxUSE_OWNER_DRAWN -#define wxUSE_CHOICE 1 -#define wxUSE_COMBOBOX 1 -#define wxUSE_GAUGE 1 -#define wxUSE_LISTBOX 1 -#define wxUSE_RADIOBOX 1 -#define wxUSE_RADIOBTN 1 -#define wxUSE_SASH 1 // wxSashWindow -#define wxUSE_SCROLLBAR 1 -#define wxUSE_SLIDER 1 -#define wxUSE_SPINBTN 1 -#define wxUSE_SPINCTRL 1 -#define wxUSE_STATLINE 1 -#define wxUSE_STATUSBAR 1 -#define wxUSE_TOGGLEBTN 1 // requires wxButton -#define wxUSE_TOOLTIPS 1 // wxToolTip and wxWindow::SetToolTip() - -// Two status bar implementations are available under Win32: the generic one -// or the wrapper around native control. For native look and feel the native -// version should be used. +// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of +// the tabs // // Default is 1. // // Recommended setting: 1 -#define wxUSE_NATIVE_STATUSBAR 1 +#define wxUSE_LISTBOOK 1 -// this setting is obsolete, value is ignored -#define wxUSE_BUTTONBAR 1 +// wxTabDialog is a generic version of wxNotebook but it is incompatible with +// the new class. It shouldn't be used in new code. +// +// Default is 0. +// +// Recommended setting: 0 (use wxNotebook) +#define wxUSE_TAB_DIALOG 0 -// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and -// the new, much imporved and enhanced version. The new version is backwards -// compatible with the old one and should be used whenever possible, i.e. if -// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too. +// wxGrid class // // Default is 1 for both options. // -// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using -// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is -// essential. +// Recommended setting: 1 // -// WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit. #define wxUSE_GRID 1 -#define wxUSE_NEW_GRID 1 -// wxValidator class and related methods -#define wxUSE_VALIDATORS 1 +// ---------------------------------------------------------------------------- +// Miscellaneous GUI stuff +// ---------------------------------------------------------------------------- // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) #define wxUSE_ACCEL 1 +// Hotkey support (currently Windows only) +#define wxUSE_HOTKEY 1 + +// Use wxCaret: a class implementing a "cursor" in a text control (called caret +// under Windows). +// +// Default is 1. +// +// Recommended setting: 1 (can be safely set to 0, not used by the library) +#define wxUSE_CARET 1 + +// Use wxDisplay class: it allows enumerating all displays on a system and +// working with them. +// +// Default is 0 because it isn't yet implemented on all platforms +// +// Recommended setting: 1 if you need it, can be safely set to 0 otherwise +#define wxUSE_DISPLAY 0 + +// Miscellaneous geometry code: needed for Canvas library +#define wxUSE_GEOMETRY 1 + +// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and +// wxListCtrl. +// +// Default is 1. +// +// Recommended setting: 1 (set it to 0 if you don't use any of the controls +// enumerated above, then this class is mostly useless too) +#define wxUSE_IMAGLIST 1 + +// Use wxMenu, wxMenuBar, wxMenuItem. +// +// Default is 1. +// +// Recommended setting: 1 (can't be disabled under MSW) +#define wxUSE_MENUS 1 + +// Use wxSashWindow class. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_SASH 1 + +// Use wxSplitterWindow class. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_SPLITTER 1 + +// Use wxToolTip and wxWindow::Set/GetToolTip() methods. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TOOLTIPS 1 + +// wxValidator class and related methods +#define wxUSE_VALIDATORS 1 + +// wxDC cacheing implementation +#define wxUSE_DC_CACHEING 1 + +// Set this to 1 to enable the use of DIB's for wxBitmap to support +// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only. +#define wxUSE_DIB_FOR_BITMAP 0 + +// Set this to 1 to enable wxDIB +#define wxUSE_WXDIB 1 + // ---------------------------------------------------------------------------- // common dialogs // ---------------------------------------------------------------------------- @@ -423,22 +695,75 @@ // Recommended setting: 1 (unless it really doesn't work) #define wxUSE_COMMON_DIALOGS 1 -// text entry dialog and wxGetTextFromUser function -#define wxUSE_TEXTDLG 1 - -// progress dialog class for lengthy operations -#define wxUSE_PROGRESSDLG 1 - // wxBusyInfo displays window with message when app is busy. Works in same way // as wxBusyCursor #define wxUSE_BUSYINFO 1 +// Use single/multiple choice dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_CHOICEDLG 1 + +// Use colour picker dialog +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_COLOURDLG 1 + // wxDirDlg class for getting a directory name from user #define wxUSE_DIRDLG 1 +// TODO: setting to choose the generic or native one + +// Use file open/save dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (used in many places in the library itself) +#define wxUSE_FILEDLG 1 + +// Use find/replace dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (but may be safely set to 0) +#define wxUSE_FINDREPLDLG 1 + +// Use font picker dialog +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_FONTDLG 1 + +// Use wxMessageDialog and wxMessageBox. +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_MSGDLG 1 + +// progress dialog class for lengthy operations +#define wxUSE_PROGRESSDLG 1 + // support for startup tips (wxShowTip &c) #define wxUSE_STARTUP_TIPS 1 +// text entry dialog and wxGetTextFromUser function +#define wxUSE_TEXTDLG 1 + +// number entry dialog +#define wxUSE_NUMBERDLG 1 + +// splash screen class +#define wxUSE_SPLASH 1 + +// wizards +#define wxUSE_WIZARDDLG 1 + // ---------------------------------------------------------------------------- // Metafiles support // ---------------------------------------------------------------------------- @@ -482,55 +807,88 @@ // smaller library. #define wxUSE_HTML 1 -// wxPlot is a class to display functions plots in wxWindow. +// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL +// headers and libraries to be able to compile the library with wxUSE_GLCANVAS +// set to 1. Note that for some compilers (notably Microsoft Visual C++) you +// will need to manually add opengl32.lib and glu32.lib to the list of +// libraries linked with your program if you use OpenGL. +// +// Default is 0. +// +// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise +#define wxUSE_GLCANVAS 0 + +// ---------------------------------------------------------------------------- +// Data transfer +// ---------------------------------------------------------------------------- + +// Use wxClipboard class for clipboard copy/paste. // // Default is 1. // // Recommended setting: 1 -#define wxUSE_PLOT 1 +#define wxUSE_CLIPBOARD 1 -// OpenGL canvas -#define wxUSE_GLCANVAS 0 +// Use wxDataObject and related classes. Needed for clipboard and OLE drag and +// drop +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DATAOBJ 1 -// wxTreeLayout class -#define wxUSE_TREELAYOUT 1 +// Use wxDropTarget and wxDropSource classes for drag and drop (this is +// different from "built in" drag and drop in wxTreeCtrl which is always +// available). Requires wxUSE_DATAOBJ. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DRAG_AND_DROP 1 + +// Use wxAccessible for enhanced and customisable accessibility. +// Depends on wxUSE_OLE. +// +// Default is 0. +// +// Recommended setting (at present): 0 +#define wxUSE_ACCESSIBILITY 0 // ---------------------------------------------------------------------------- // miscellaneous settings // ---------------------------------------------------------------------------- +// wxSingleInstanceChecker class allows to verify at startup if another program +// instance is running (it is only available under Win32) +// +// Default is 1 +// +// Recommended setting: 1 (the class is tiny, disabling it won't save much +// space) +#define wxUSE_SNGLINST_CHECKER 1 + +#define wxUSE_DRAGIMAGE 1 + #define wxUSE_IPC 1 // 0 for no interprocess comms #define wxUSE_HELP 1 // 0 for no help facility -#define wxUSE_MS_HTML_HELP 0 +#define wxUSE_MS_HTML_HELP 1 // 0 for no MS HTML Help + +// Use wxHTML-based help controller? +#define wxUSE_WXHTML_HELP 1 + #define wxUSE_RESOURCES 1 // 0 for no wxGetResource/wxWriteResource #define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system -#define wxUSE_CLIPBOARD 1 - // 0 for no clipboard functions - #define wxUSE_SPLINES 1 // 0 for no splines -#define wxUSE_DRAG_AND_DROP 1 - // 0 for no drag and drop - -#define wxUSE_XPM_IN_MSW 1 - // 0 for no XPM support in wxBitmap. - // Default is 1, as XPM is now fully - // supported this makes easier the issue - // of portable icons and bitmaps. -#define wxUSE_IMAGE_LOADING_IN_MSW 1 - // Use dynamic DIB loading/saving code in utils/dib under MSW. -#define wxUSE_RESOURCE_LOADING_IN_MSW 1 - // Use dynamic icon/cursor loading/saving code - // under MSW. -#define wxUSE_WX_RESOURCES 1 - // Use .wxr resource mechanism (requires PrologIO library) +#define wxUSE_MOUSEWHEEL 1 + // Include mouse wheel support // ---------------------------------------------------------------------------- // postscript support settings @@ -540,7 +898,7 @@ #define wxUSE_POSTSCRIPT 0 // Set to 1 to use font metric files in GetTextExtent -#define wxUSE_AFM_FOR_POSTSCRIPT 0 +#define wxUSE_AFM_FOR_POSTSCRIPT 1 // Set to 0 to disable PostScript print/preview architecture code under Windows // (just use Windows printing). @@ -555,10 +913,10 @@ // For backward compatibility reasons, this parameter now only controls the // default scrolling method used by cursors. This default behavior can be -// overriden by setting the second param of wxDB::wxDbGetConnection() or +// overriden by setting the second param of wxDB::wxDbGetConnection() or // wxDb() constructor to indicate whether the connection (and any wxDbTable()s -// that use the connection) should support forward only scrolling of cursors, -// or both forward and backward support for backward scrolling cursors is +// that use the connection) should support forward only scrolling of cursors, +// or both forward and backward support for backward scrolling cursors is // dependent on the data source as well as the ODBC driver being used. #define wxODBC_FWD_ONLY_CURSORS 1 @@ -582,7 +940,9 @@ #define REMOVE_UNUSED_ARG 1 // VC++ 4.2 and above allows and but you can't mix -// them. Set to 1 for , 0 for +// them. Set to 1 for , 0 for . Note that VC++ 7.1 +// and later doesn't support wxUSE_IOSTREAMH == 1 and so will be +// used anyhow. // // Default is 1. // @@ -601,6 +961,9 @@ // Some formats require an extra library which is included in wxWin sources // which is mentioned if it is the case. +// Set to 1 for wxImage support (recommended). +#define wxUSE_IMAGE 1 + // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. #define wxUSE_LIBPNG 1 @@ -619,6 +982,18 @@ // Set to 1 for PCX format support #define wxUSE_PCX 1 +// Set to 1 for IFF format support (Amiga format) +#define wxUSE_IFF 0 + +// Set to 1 for XPM format support +#define wxUSE_XPM 1 + +// Set to 1 for MS Icons and Cursors format support +#define wxUSE_ICO_CUR 1 + +// Set to 1 to compile in wxPalette class +#define wxUSE_PALETTE 1 + // ---------------------------------------------------------------------------- // Windows-only settings // ---------------------------------------------------------------------------- @@ -658,12 +1033,7 @@ // // Default is 0 for (most) Win32 (systems), 1 for Win16 // -// Recommended setting: same as default -#if defined(__WIN95__) #define wxUSE_ITSY_BITSY 0 -#else -#define wxUSE_ITSY_BITSY 1 -#endif // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH // which allows to put more than ~32Kb of text in it even under Win9x (NT @@ -673,10 +1043,16 @@ // // Recommended setting: 1, only set it to 0 if your compiler doesn't have // or can't compile -#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__) -#define wxUSE_RICHEDIT 1 +#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__) +#define wxUSE_RICHEDIT 1 + +// TODO: This should be ifdef'ed for any compilers that don't support +// RichEdit 2.0 but do have RichEdit 1.0... +#define wxUSE_RICHEDIT2 1 + #else -#define wxUSE_RICHEDIT 0 +#define wxUSE_RICHEDIT 0 +#define wxUSE_RICHEDIT2 0 #endif // Set this to 1 to enable support for the owner-drawn menu and listboxes. This @@ -687,6 +1063,16 @@ // Recommended setting: 1, set to 0 for a small library size reduction #define wxUSE_OWNER_DRAWN 1 +// Set to 1 to compile MS Windows XP theme engine support +#define wxUSE_UXTHEME 1 + +// Set to 1 to auto-adapt to MS Windows XP themes where possible +// (notably, wxNotebook pages) +#define wxUSE_UXTHEME_AUTO 1 + +// Set to 1 to if you're developing for MS SmartPhone +#define wxUSE_SMARTPHONE 0 + // ---------------------------------------------------------------------------- // obsolete settings // ---------------------------------------------------------------------------- @@ -704,227 +1090,5 @@ // NOW MANDATORY: don't change. #define wxUSE_DYNAMIC_CLASSES 1 -// ---------------------------------------------------------------------------- -// disable the settings which don't work for some compilers -// ---------------------------------------------------------------------------- - -#ifndef wxUSE_NORLANDER_HEADERS -#if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) -# define wxUSE_NORLANDER_HEADERS 1 -#else -# define wxUSE_NORLANDER_HEADERS 0 -#endif -#endif - -#if defined(__GNUWIN32__) -// These don't work as expected for mingw32 and cygwin32 -#undef wxUSE_MEMORY_TRACING -#define wxUSE_MEMORY_TRACING 0 - -#undef wxUSE_GLOBAL_MEMORY_OPERATORS -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 - -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 - -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 - -// Cygwin betas don't have wcslen -#if defined(__CYGWIN__) || defined(__CYGWIN32__) -# if ! ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) -# undef wxUSE_WCHAR_T -# define wxUSE_WCHAR_T 0 -# endif -#endif - -#endif // __GNUWIN32__ - -// MFC duplicates these operators -#if wxUSE_MFC -#undef wxUSE_GLOBAL_MEMORY_OPERATORS -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 - -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 -#endif // wxUSE_MFC - -// ODBC classes aren't Unicode-compatible yet -#if wxUSE_UNICODE -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 -#endif - -#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS) -// Can't use OLE drag and drop in Windows 3.1 because we don't know how -// to implement UUIDs -// GnuWin32 doesn't have appropriate headers for e.g. IUnknown. -#undef wxUSE_DRAG_AND_DROP -#define wxUSE_DRAG_AND_DROP 0 -#endif - -// Only WIN32 supports wxStatusBar95 -#if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR -#undef wxUSE_NATIVE_STATUSBAR -#define wxUSE_NATIVE_STATUSBAR 0 -#endif - -#if !wxUSE_OWNER_DRAWN -#undef wxUSE_CHECKLISTBOX -#define wxUSE_CHECKLISTBOX 0 -#endif - -// Salford C++ doesn't like some of the memory operator definitions -#ifdef __SALFORDC__ -#undef wxUSE_MEMORY_TRACING -#define wxUSE_MEMORY_TRACING 0 - -#undef wxUSE_GLOBAL_MEMORY_OPERATORS -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 - -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 - -#undef wxUSE_THREADS -#define wxUSE_THREADS 0 - -#undef wxUSE_OWNER_DRAWN -#define wxUSE_OWNER_DRAWN 0 -#endif // __SALFORDC__ - -#ifdef __TWIN32__ - -#undef wxUSE_THREADS -#define wxUSE_THREADS 0 - -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 - -#endif // __TWIN32__ - -// BC++/Win16 can't cope with the amount of data in resource.cpp -#if defined(__WIN16__) && defined(__BORLANDC__) -#undef wxUSE_WX_RESOURCES -#define wxUSE_WX_RESOURCES 0 - -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 - -#undef wxUSE_NEW_GRID -#define wxUSE_NEW_GRID 0 -#endif - -#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500) -// BC++ 4.0 can't compile JPEG library -#undef wxUSE_LIBJPEG -#define wxUSE_LIBJPEG 0 -#endif - -#if defined(__BORLANDC__) -// Need a BC++-specific htmlhelp.lib before we can enable this -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 -#endif - -// wxUSE_DEBUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode -#if defined(__BORLANDC__) && (defined(WXMAKINGDLL) || defined(WXUSINGDLL)) -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 -#endif - -#if defined(__WXMSW__) && defined(__WATCOMC__) -/* -#undef wxUSE_GLCANVAS -#define wxUSE_GLCANVAS 0 -*/ - -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 - -#undef wxUSE_WCHAR_T -#define wxUSE_WCHAR_T 0 -#endif - -#if defined(__WXMSW__) && !defined(__WIN32__) - -#undef wxUSE_SOCKETS -#define wxUSE_SOCKETS 0 - -#undef wxUSE_THREADS -#define wxUSE_THREADS 0 - -#undef wxUSE_TOOLTIPS -#define wxUSE_TOOLTIPS 0 - -#undef wxUSE_SPINCTRL -#define wxUSE_SPINCTRL 0 - -#undef wxUSE_SPINBTN -#define wxUSE_SPINBTN 0 - -#undef wxUSE_LIBPNG -#define wxUSE_LIBPNG 0 - -#undef wxUSE_LIBJPEG -#define wxUSE_LIBJPEG 0 - -#undef wxUSE_LIBTIFF -#define wxUSE_LIBTIFF 0 - -#undef wxUSE_GIF -#define wxUSE_GIF 0 - -#undef wxUSE_PNM -#define wxUSE_PNM 0 - -#undef wxUSE_PCX -#define wxUSE_PCX 0 - -#undef wxUSE_GLCANVAS -#define wxUSE_GLCANVAS 0 - -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 - -#undef wxUSE_WCHAR_T -#define wxUSE_WCHAR_T 0 - -#endif // Win16 - -// ---------------------------------------------------------------------------- -// undef the things which don't make sense for wxBase build -// ---------------------------------------------------------------------------- - -#if !wxUSE_GUI - -#undef wxUSE_HTML -#define wxUSE_HTML 0 - -#endif // !wxUSE_GUI - -// ---------------------------------------------------------------------------- -// check the settings consistency: do it here to abort compilation immediately -// and not almost in the very end when the relevant file fails to compile and -// you need to modify setup.h and rebuild everything -// ---------------------------------------------------------------------------- - -#if wxUSE_TIMEDATE && !wxUSE_LONGLONG - #error wxDateTime requires wxLongLong -#endif - -#if wxUSE_TEXTFILE && !wxUSE_FILE - #error You cannot compile wxTextFile without wxFile -#endif - -#if wxUSE_FILESYSTEM && !wxUSE_STREAMS - #error You cannot compile virtual file systems without wxUSE_STREAMS -#endif - -#if wxUSE_HTML && !wxUSE_FILESYSTEM - #error You cannot compile wxHTML without virtual file systems -#endif - -// add more tests here... - #endif // _WX_SETUP_H_