X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/dce2bd223c2370f001f9ca93e04cbd437ff3f988..89d1e2eeab15869685246c20dc260432ea548ea6:/wxPython/src/_dc.i diff --git a/wxPython/src/_dc.i b/wxPython/src/_dc.i index d48f246665..47295bc265 100644 --- a/wxPython/src/_dc.i +++ b/wxPython/src/_dc.i @@ -38,27 +38,91 @@ %newgroup; -// wxDC is the device context - object on which any drawing is done +DocStr(wxDC, +"A wx.DC is a device context onto which graphics and text can be +drawn. It is intended to represent a number of output devices in a +generic way, so a window can have a device context associated with it, +and a printer also has a device context. In this way, the same piece +of code may write to a number of different devices, if the device +context is used as a parameter. + +Derived types of wxDC have documentation for specific features only, +so refer to this section for most device context information. + +The wx.DC class is abstract and can not be instantiated, you must use +one of the derived classes instead. Which one will depend on the +situation in which it is used.", ""); + class wxDC : public wxObject { public: // wxDC(); **** abstract base class, can't instantiate. ~wxDC(); - virtual void BeginDrawing(); - virtual void EndDrawing(); + %pythoncode { + %# These have been deprecated in wxWidgets. Since they never + %# really did anything to begin with, just make them be NOPs. + def BeginDrawing(self): pass + def EndDrawing(self): pass + } + + + +// TODO virtual void DrawObject(wxDrawObject* drawobject); -// virtual void DrawObject(wxDrawObject* drawobject); + DocStr( + FloodFill, + "Flood fills the device context starting from the given point, using +the current brush colour, and using a style: + - **wxFLOOD_SURFACE**: the flooding occurs until a colour other than + the given colour is encountered. + - **wxFLOOD_BORDER**: the area to be flooded is bounded by the given + colour. -#if defined(wxUSE_DC_OLD_METHODS) +Returns False if the operation failed. +Note: The present implementation for non-Windows platforms may fail to +find colour borders if the pixels do not match the colour +exactly. However the function will still return true.", ""); bool FloodFill(wxCoord x, wxCoord y, const wxColour& col, int style = wxFLOOD_SURFACE); - %name(FloodFillPoint) bool FloodFill(const wxPoint& pt, const wxColour& col, int style = wxFLOOD_SURFACE); + %Rename(FloodFillPoint, bool, FloodFill(const wxPoint& pt, const wxColour& col, int style = wxFLOOD_SURFACE)); + + // fill the area specified by rect with a radial gradient, starting from + // initialColour in the centre of the cercle and fading to destColour. + + DocDeclStr( + void , GradientFillConcentric(const wxRect& rect, + const wxColour& initialColour, + const wxColour& destColour, + const wxPoint& circleCenter), + "Fill the area specified by rect with a radial gradient, starting from +initialColour in the center of the circle and fading to destColour on +the outside of the circle. The circleCenter argument is the relative +coordinants of the center of the circle in the specified rect. + +Note: Currently this function is very slow, don't use it for real-time +drawing.", ""); + - //bool GetPixel(wxCoord x, wxCoord y, wxColour *col) const; + DocDeclStr( + void , GradientFillLinear(const wxRect& rect, + const wxColour& initialColour, + const wxColour& destColour, + wxDirection nDirection = wxEAST), + "Fill the area specified by rect with a linear gradient, starting from +initialColour and eventually fading to destColour. The nDirection +parameter specifies the direction of the colour change, default is to +use initialColour on the left part of the rectangle and destColour on +the right side.", ""); + + + + DocStr( + GetPixel, + "Gets the colour at the specified location on the DC.",""); %extend { wxColour GetPixel(wxCoord x, wxCoord y) { wxColour col; @@ -71,145 +135,276 @@ public: return col; } } + + DocStr( + DrawLine, + "Draws a line from the first point to the second. The current pen is +used for drawing the line. Note that the second point is *not* part of +the line and is not drawn by this function (this is consistent with +the behaviour of many other toolkits).", ""); void DrawLine(wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2); - %name(DrawLinePoint) void DrawLine(const wxPoint& pt1, const wxPoint& pt2); + %Rename(DrawLinePoint, void, DrawLine(const wxPoint& pt1, const wxPoint& pt2)); + + DocStr( + CrossHair, + "Displays a cross hair using the current pen. This is a vertical and +horizontal line the height and width of the window, centred on the +given point.", ""); void CrossHair(wxCoord x, wxCoord y); - %name(CrossHairPoint) void CrossHair(const wxPoint& pt); + %Rename(CrossHairPoint, void, CrossHair(const wxPoint& pt)); - void DrawArc(wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2, wxCoord xc, wxCoord yc); - %name(DrawArcPoint) void DrawArc(const wxPoint& pt1, const wxPoint& pt2, const wxPoint& centre); - void DrawCheckMark(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - %name(DrawCheckMarkRect) void DrawCheckMark(const wxRect& rect); + DocStr( + DrawArc, + "Draws an arc of a circle, centred on the *center* point (xc, yc), from +the first point to the second. The current pen is used for the outline +and the current brush for filling the shape. + +The arc is drawn in an anticlockwise direction from the start point to +the end point.", ""); + void DrawArc(wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2, wxCoord xc, wxCoord yc); + %Rename(DrawArcPoint, void, DrawArc(const wxPoint& pt1, const wxPoint& pt2, const wxPoint& center)); - void DrawEllipticArc(wxCoord x, wxCoord y, wxCoord w, wxCoord h, double sa, double ea); - %name(DrawEllipticArcPtSz) void DrawEllipticArc(const wxPoint& pt, const wxSize& sz, double sa, double ea); + DocStr( + DrawCheckMark, + "Draws a check mark inside the given rectangle.", ""); + void DrawCheckMark(wxCoord x, wxCoord y, wxCoord width, wxCoord height); + %Rename(DrawCheckMarkRect, void, DrawCheckMark(const wxRect& rect)); + + DocStr( + DrawEllipticArc, + "Draws an arc of an ellipse, with the given rectangle defining the +bounds of the ellipse. The current pen is used for drawing the arc and +the current brush is used for drawing the pie. + +The *start* and *end* parameters specify the start and end of the arc +relative to the three-o'clock position from the center of the +rectangle. Angles are specified in degrees (360 is a complete +circle). Positive values mean counter-clockwise motion. If start is +equal to end, a complete ellipse will be drawn.", ""); + void DrawEllipticArc(wxCoord x, wxCoord y, wxCoord w, wxCoord h, double start, double end); + %Rename(DrawEllipticArcPointSize, void, DrawEllipticArc(const wxPoint& pt, const wxSize& sz, double start, double end)); + + + DocStr( + DrawPoint, + "Draws a point using the current pen.", ""); void DrawPoint(wxCoord x, wxCoord y); - %name(DrawPointPoint) void DrawPoint(const wxPoint& pt); + %Rename(DrawPointPoint, void, DrawPoint(const wxPoint& pt)); - void DrawRectangle(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - %name(DrawRectangleRect)void DrawRectangle(const wxRect& rect); - %name(DrawRectanglePtSz) void DrawRectangle(const wxPoint& pt, const wxSize& sz); + DocStr( + DrawRectangle, + "Draws a rectangle with the given top left corner, and with the given +size. The current pen is used for the outline and the current brush +for filling the shape.", ""); + void DrawRectangle(wxCoord x, wxCoord y, wxCoord width, wxCoord height); + %Rename(DrawRectangleRect,void, DrawRectangle(const wxRect& rect)); + %Rename(DrawRectanglePointSize, void, DrawRectangle(const wxPoint& pt, const wxSize& sz)); + + + DocStr( + DrawRoundedRectangle, + "Draws a rectangle with the given top left corner, and with the given +size. The corners are quarter-circles using the given radius. The +current pen is used for the outline and the current brush for filling +the shape. + +If radius is positive, the value is assumed to be the radius of the +rounded corner. If radius is negative, the absolute value is assumed +to be the proportion of the smallest dimension of the rectangle. This +means that the corner can be a sensible size relative to the size of +the rectangle, and also avoids the strange effects X produces when the +corners are too big for the rectangle.", ""); void DrawRoundedRectangle(wxCoord x, wxCoord y, wxCoord width, wxCoord height, double radius); - %name(DrawRoundedRectangleRect) void DrawRoundedRectangle(const wxRect& r, double radius); - %name(DrawRoundedRectanglePtSz) void DrawRoundedRectangle(const wxPoint& pt, const wxSize& sz, double radius); + %Rename(DrawRoundedRectangleRect, void, DrawRoundedRectangle(const wxRect& r, double radius)); + %Rename(DrawRoundedRectanglePointSize, void, DrawRoundedRectangle(const wxPoint& pt, const wxSize& sz, double radius)); - void DrawCircle(wxCoord x, wxCoord y, wxCoord radius); - %name(DrawCirclePoint) void DrawCircle(const wxPoint& pt, wxCoord radius); - - void DrawEllipse(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - %name(DrawEllipseRect) void DrawEllipse(const wxRect& rect); - %name(DrawEllipsePtSz) void DrawEllipse(const wxPoint& pt, const wxSize& sz); - void DrawIcon(const wxIcon& icon, wxCoord x, wxCoord y); - %name(DrawIconPoint) void DrawIcon(const wxIcon& icon, const wxPoint& pt); - - void DrawBitmap(const wxBitmap &bmp, wxCoord x, wxCoord y, bool useMask = False); - %name(DrawBitmapPoint) void DrawBitmap(const wxBitmap &bmp, const wxPoint& pt, bool useMask = False); - - void DrawText(const wxString& text, wxCoord x, wxCoord y); - %name(DrawTextPoint) void DrawText(const wxString& text, const wxPoint& pt); + DocStr( + DrawCircle, + "Draws a circle with the given center point and radius. The current +pen is used for the outline and the current brush for filling the +shape.", " - void DrawRotatedText(const wxString& text, wxCoord x, wxCoord y, double angle); - %name(DrawRotatedTextPoint) void DrawRotatedText(const wxString& text, const wxPoint& pt, double angle); +:see: `DrawEllipse`"); + void DrawCircle(wxCoord x, wxCoord y, wxCoord radius); + %Rename(DrawCirclePoint, void, DrawCircle(const wxPoint& pt, wxCoord radius)); - bool Blit(wxCoord xdest, wxCoord ydest, wxCoord width, wxCoord height, - wxDC *source, wxCoord xsrc, wxCoord ysrc, - int rop = wxCOPY, bool useMask = False, - wxCoord xsrcMask = -1, wxCoord ysrcMask = -1); - %name(BlitPtSz) bool Blit(const wxPoint& destPt, const wxSize& sz, - wxDC *source, const wxPoint& srcPt, - int rop = wxCOPY, bool useMask = False, - const wxPoint& srcPtMask = wxDefaultPosition); + DocStr( + DrawEllipse, + "Draws an ellipse contained in the specified rectangle. The current pen +is used for the outline and the current brush for filling the shape.", " +:see: `DrawCircle`"); + void DrawEllipse(wxCoord x, wxCoord y, wxCoord width, wxCoord height); + %Rename(DrawEllipseRect, void, DrawEllipse(const wxRect& rect)); + %Rename(DrawEllipsePointSize, void, DrawEllipse(const wxPoint& pt, const wxSize& sz)); -#else // The new way - %name(FloodFillXY) bool FloodFill(wxCoord x, wxCoord y, const wxColour& col, int style = wxFLOOD_SURFACE); - bool FloodFill(const wxPoint& pt, const wxColour& col, int style = wxFLOOD_SURFACE); + DocStr( + DrawIcon, + "Draw an icon on the display (does nothing if the device context is +PostScript). This can be the simplest way of drawing bitmaps on a +window.", ""); + void DrawIcon(const wxIcon& icon, wxCoord x, wxCoord y); + %Rename(DrawIconPoint, void, DrawIcon(const wxIcon& icon, const wxPoint& pt)); - //%name(GetPixelXY) bool GetPixel(wxCoord x, wxCoord y, wxColour *col) const; - //bool GetPixel(const wxPoint& pt, wxColour *col) const; - %extend { - wxColour GetPixelXY(wxCoord x, wxCoord y) { - wxColour col; - self->GetPixel(x, y, &col); - return col; - } - wxColour GetPixel(const wxPoint& pt) { - wxColour col; - self->GetPixel(pt, &col); - return col; - } - } - - %name(DrawLineXY) void DrawLine(wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2); - void DrawLine(const wxPoint& pt1, const wxPoint& pt2); - %name(CrossHairXY) void CrossHair(wxCoord x, wxCoord y); - void CrossHair(const wxPoint& pt); + DocStr( + DrawBitmap, + "Draw a bitmap on the device context at the specified point. If +*transparent* is true and the bitmap has a transparency mask, (or +alpha channel on the platforms that support it) then the bitmap will +be drawn transparently.", " - %name(DrawArcXY) void DrawArc(wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2, wxCoord xc, wxCoord yc); - void DrawArc(const wxPoint& pt1, const wxPoint& pt2, const wxPoint& centre); +When drawing a mono-bitmap, the current text foreground colour will be +used to draw the foreground of the bitmap (all bits set to 1), and the +current text background colour to draw the background (all bits set to +0). - %name(DrawCheckMarkXY) void DrawCheckMark(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - void DrawCheckMark(const wxRect& rect); +:see: `SetTextForeground`, `SetTextBackground` and `wx.MemoryDC`"); + void DrawBitmap(const wxBitmap &bmp, wxCoord x, wxCoord y, bool useMask = false); + %Rename(DrawBitmapPoint, void, DrawBitmap(const wxBitmap &bmp, const wxPoint& pt, bool useMask = false)); - %name(DrawEllipticArcXY) void DrawEllipticArc(wxCoord x, wxCoord y, wxCoord w, wxCoord h, double sa, double ea); - void DrawEllipticArc(const wxPoint& pt, const wxSize& sz, double sa, double ea); - %name(DrawPointXY) void DrawPoint(wxCoord x, wxCoord y); - void DrawPoint(const wxPoint& pt); + DocStr( + DrawText, + "Draws a text string at the specified point, using the current text +font, and the current text foreground and background colours. - %name(DrawRectangleXY) void DrawRectangle(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - void DrawRectangle(const wxPoint& pt, const wxSize& sz); - %name(DrawRectangleRect) void DrawRectangle(const wxRect& rect); +The coordinates refer to the top-left corner of the rectangle bounding +the string. See `GetTextExtent` for how to get the dimensions of a +text string, which can be used to position the text more precisely. - %name(DrawRoundedRectangleXY) void DrawRoundedRectangle(wxCoord x, wxCoord y, wxCoord width, wxCoord height, double radius); - void DrawRoundedRectangle(const wxPoint& pt, const wxSize& sz, double radius); - %name(DrawRoundedRectangleRect) void DrawRoundedRectangle(const wxRect& r, double radius); +**NOTE**: under wxGTK the current logical function is used by this +function but it is ignored by wxMSW. Thus, you should avoid using +logical functions with this function in portable programs.", " - %name(DrawCircleXY) void DrawCircle(wxCoord x, wxCoord y, wxCoord radius); - void DrawCircle(const wxPoint& pt, wxCoord radius); +:see: `DrawRotatedText`"); + void DrawText(const wxString& text, wxCoord x, wxCoord y); + %Rename(DrawTextPoint, void, DrawText(const wxString& text, const wxPoint& pt)); - %name(DrawEllipseXY) void DrawEllipse(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - void DrawEllipse(const wxPoint& pt, const wxSize& sz); - %name(DrawEllipseRect) void DrawEllipse(const wxRect& rect); - %name(DrawIconXY) void DrawIcon(const wxIcon& icon, wxCoord x, wxCoord y); - void DrawIcon(const wxIcon& icon, const wxPoint& pt); + DocStr( + DrawRotatedText, + "Draws the text rotated by *angle* degrees, if supported by the platform. - %name(DrawBitmapXY) void DrawBitmap(const wxBitmap &bmp, wxCoord x, wxCoord y, bool useMask = False); - void DrawBitmap(const wxBitmap &bmp, const wxPoint& pt, bool useMask = False); +**NOTE**: Under Win9x only TrueType fonts can be drawn by this +function. In particular, a font different from ``wx.NORMAL_FONT`` +should be used as the it is not normally a TrueType +font. ``wx.SWISS_FONT`` is an example of a font which is."," - %name(DrawTextXY) void DrawText(const wxString& text, wxCoord x, wxCoord y); - void DrawText(const wxString& text, const wxPoint& pt); +:see: `DrawText`"); + void DrawRotatedText(const wxString& text, wxCoord x, wxCoord y, double angle); + %Rename(DrawRotatedTextPoint, void, DrawRotatedText(const wxString& text, const wxPoint& pt, double angle)); + + + DocDeclStr( + bool , Blit(wxCoord xdest, wxCoord ydest, wxCoord width, wxCoord height, + wxDC *source, wxCoord xsrc, wxCoord ysrc, + int rop = wxCOPY, bool useMask = false, + wxCoord xsrcMask = -1, wxCoord ysrcMask = -1), + "Copy from a source DC to this DC. Parameters specify the destination +coordinates, size of area to copy, source DC, source coordinates, +logical function, whether to use a bitmap mask, and mask source +position.", " + + :param xdest: Destination device context x position. + :param ydest: Destination device context y position. + :param width: Width of source area to be copied. + :param height: Height of source area to be copied. + :param source: Source device context. + :param xsrc: Source device context x position. + :param ysrc: Source device context y position. + :param rop: Logical function to use: see `SetLogicalFunction`. + :param useMask: If true, Blit does a transparent blit using the mask + that is associated with the bitmap selected into the + source device context. + :param xsrcMask: Source x position on the mask. If both xsrcMask and + ysrcMask are -1, xsrc and ysrc will be assumed for + the mask source position. + :param ysrcMask: Source y position on the mask. +"); + + DocDeclStrName( + bool , Blit(const wxPoint& destPt, const wxSize& sz, + wxDC *source, const wxPoint& srcPt, + int rop = wxCOPY, bool useMask = false, + const wxPoint& srcPtMask = wxDefaultPosition), + "Copy from a source DC to this DC. Parameters specify the destination +coordinates, size of area to copy, source DC, source coordinates, +logical function, whether to use a bitmap mask, and mask source +position.", " + + :param destPt: Destination device context position. + :param sz: Size of source area to be copied. + :param source: Source device context. + :param srcPt: Source device context position. + :param rop: Logical function to use: see `SetLogicalFunction`. + :param useMask: If true, Blit does a transparent blit using the mask + that is associated with the bitmap selected into the + source device context. + :param srcPtMask: Source position on the mask. +", + BlitPointSize); + + + DocDeclStr( + wxBitmap , GetAsBitmap(const wxRect *subrect = NULL) const, + "", ""); + + - %name(DrawRotatedTextXY) void DrawRotatedText(const wxString& text, wxCoord x, wxCoord y, double angle); - void DrawRotatedText(const wxString& text, const wxPoint& pt, double angle); + DocStr( + SetClippingRegion, + "Sets the clipping region for this device context to the intersection +of the given region described by the parameters of this method and the +previously set clipping region. You should call `DestroyClippingRegion` +if you want to set the clipping region exactly to the region +specified. +The clipping region is an area to which drawing is +restricted. Possible uses for the clipping region are for clipping +text or for speeding up window redraws when only a known area of the +screen is damaged.", " - %name(BlitXY) bool Blit(wxCoord xdest, wxCoord ydest, wxCoord width, wxCoord height, - wxDC *source, wxCoord xsrc, wxCoord ysrc, - int rop = wxCOPY, bool useMask = False, - wxCoord xsrcMask = -1, wxCoord ysrcMask = -1); - bool Blit(const wxPoint& destPt, const wxSize& sz, - wxDC *source, const wxPoint& srcPt, - int rop = wxCOPY, bool useMask = False, - const wxPoint& srcPtMask = wxDefaultPosition); +:see: `DestroyClippingRegion`, `wx.Region`"); + void SetClippingRegion(wxCoord x, wxCoord y, wxCoord width, wxCoord height); + %Rename(SetClippingRegionPointSize, void, SetClippingRegion(const wxPoint& pt, const wxSize& sz)); + %Rename(SetClippingRegionAsRegion, void, SetClippingRegion(const wxRegion& region)); + %Rename(SetClippingRect, void, SetClippingRegion(const wxRect& rect)); -#endif - void DrawLines(int points, wxPoint* points_array, wxCoord xoffset = 0, wxCoord yoffset = 0); + + DocDeclAStr( + void , DrawLines(int points, wxPoint* points_array, + wxCoord xoffset = 0, wxCoord yoffset = 0), + "DrawLines(self, List points, int xoffset=0, int yoffset=0)", + "Draws lines using a sequence of `wx.Point` objects, adding the +optional offset coordinate. The current pen is used for drawing the +lines.", ""); + - void DrawPolygon(int points, wxPoint* points_array, + DocDeclAStr( + void , DrawPolygon(int points, wxPoint* points_array, wxCoord xoffset = 0, wxCoord yoffset = 0, - int fillStyle = wxODDEVEN_RULE); + int fillStyle = wxODDEVEN_RULE), + "DrawPolygon(self, List points, int xoffset=0, int yoffset=0, + int fillStyle=ODDEVEN_RULE)", + "Draws a filled polygon using a sequence of `wx.Point` objects, adding +the optional offset coordinate. The last argument specifies the fill +rule: ``wx.ODDEVEN_RULE`` (the default) or ``wx.WINDING_RULE``. + +The current pen is used for drawing the outline, and the current brush +for filling the shape. Using a transparent brush suppresses +filling. Note that wxWidgets automatically closes the first and last +points.", ""); + // TODO: Figure out a good typemap for this... // Convert the first 3 args from a sequence of sequences? @@ -218,14 +413,23 @@ public: // int fillStyle = wxODDEVEN_RULE); - // this version puts both optional bitmap and the text into the given - // rectangle and aligns is as specified by alignment parameter; it also - // will emphasize the character with the given index if it is != -1 and - // return the bounding rectangle if required - void DrawLabel(const wxString& text, const wxRect& rect, - int alignment = wxALIGN_LEFT | wxALIGN_TOP, - int indexAccel = -1); + DocDeclStr( + void , DrawLabel(const wxString& text, const wxRect& rect, + int alignment = wxALIGN_LEFT | wxALIGN_TOP, + int indexAccel = -1), + "Draw *text* within the specified rectangle, abiding by the alignment +flags. Will additionally emphasize the character at *indexAccel* if +it is not -1.", " + +:see: `DrawImageLabel`"); + + %extend { + DocStr(DrawImageLabel, + "Draw *text* and an image (which may be ``wx.NullBitmap`` to skip +drawing it) within the specified rectangle, abiding by the alignment +flags. Will additionally emphasize the character at *indexAccel* if +it is not -1. Returns the bounding rectangle.", ""); wxRect DrawImageLabel(const wxString& text, const wxBitmap& image, const wxRect& rect, @@ -239,48 +443,111 @@ public: - void DrawSpline(int points, wxPoint* points_array); + DocDeclAStr( + void , DrawSpline(int points, wxPoint* points_array), + "DrawSpline(self, List points)", + "Draws a spline between all given control points, (a list of `wx.Point` +objects) using the current pen. The spline is drawn using a series of +lines, using an algorithm taken from the X drawing program 'XFIG'.", ""); + // global DC operations // -------------------- - virtual void Clear(); + DocDeclStr( + virtual void , Clear(), + "Clears the device context using the current background brush.", ""); + - virtual bool StartDoc(const wxString& message); - virtual void EndDoc(); + DocDeclStr( + virtual bool , StartDoc(const wxString& message), + "Starts a document (only relevant when outputting to a +printer). *Message* is a message to show whilst printing.", ""); + + DocDeclStr( + virtual void , EndDoc(), + "Ends a document (only relevant when outputting to a printer).", ""); + - virtual void StartPage(); - virtual void EndPage(); + DocDeclStr( + virtual void , StartPage(), + "Starts a document page (only relevant when outputting to a printer).", ""); + + DocDeclStr( + virtual void , EndPage(), + "Ends a document page (only relevant when outputting to a printer).", ""); + // set objects to use for drawing // ------------------------------ - virtual void SetFont(const wxFont& font); - virtual void SetPen(const wxPen& pen); - virtual void SetBrush(const wxBrush& brush); - virtual void SetBackground(const wxBrush& brush); - virtual void SetBackgroundMode(int mode); - virtual void SetPalette(const wxPalette& palette); + DocDeclStr( + virtual void , SetFont(const wxFont& font), + "Sets the current font for the DC. It must be a valid font, in +particular you should not pass ``wx.NullFont`` to this method."," +:see: `wx.Font`"); + + DocDeclStr( + virtual void , SetPen(const wxPen& pen), + "Sets the current pen for the DC. - // clipping region - // --------------- +If the argument is ``wx.NullPen``, the current pen is selected out of the +device context, and the original pen restored.", " - %name(SetClippingRegionXY)void SetClippingRegion(wxCoord x, wxCoord y, wxCoord width, wxCoord height); - void SetClippingRegion(const wxPoint& pt, const wxSize& sz); - %name(SetClippingRect) void SetClippingRegion(const wxRect& rect); - %name(SetClippingRegionAsRegion) void SetClippingRegion(const wxRegion& region); +:see: `wx.Pen`"); + + DocDeclStr( + virtual void , SetBrush(const wxBrush& brush), + "Sets the current brush for the DC. - virtual void DestroyClippingRegion(); +If the argument is ``wx.NullBrush``, the current brush is selected out +of the device context, and the original brush restored, allowing the +current brush to be destroyed safely."," - DocDeclA( +:see: `wx.Brush`"); + + DocDeclStr( + virtual void , SetBackground(const wxBrush& brush), + "Sets the current background brush for the DC.", ""); + + DocDeclStr( + virtual void , SetBackgroundMode(int mode), + "*mode* may be one of ``wx.SOLID`` and ``wx.TRANSPARENT``. This setting +determines whether text will be drawn with a background colour or +not.", ""); + + DocDeclStr( + virtual void , SetPalette(const wxPalette& palette), + "If this is a window DC or memory DC, assigns the given palette to the +window or bitmap associated with the DC. If the argument is +``wx.NullPalette``, the current palette is selected out of the device +context, and the original palette restored.", " + +:see: `wx.Palette`"); + + + + DocDeclStr( + virtual void , DestroyClippingRegion(), + "Destroys the current clipping region so that none of the DC is +clipped.", " + +:see: `SetClippingRegion`"); + + + DocDeclAStr( void, GetClippingBox(wxCoord *OUTPUT, wxCoord *OUTPUT, wxCoord *OUTPUT, wxCoord *OUTPUT) const, - "GetClippingBox() -> (x, y, width, height)"); + "GetClippingBox() -> (x, y, width, height)", + "Gets the rectangle surrounding the current clipping region.", ""); %extend { + DocStr( + GetClippingRect, + "Gets the rectangle surrounding the current clipping region.", ""); wxRect GetClippingRect() { wxRect rect; self->GetClippingBox(rect); @@ -293,22 +560,29 @@ public: // text extent // ----------- - virtual wxCoord GetCharHeight() const; - virtual wxCoord GetCharWidth() const; + DocDeclStr( + virtual wxCoord , GetCharHeight() const, + "Gets the character height of the currently set font.", ""); + + DocDeclStr( + virtual wxCoord , GetCharWidth() const, + "Gets the average character width of the currently set font.", ""); + DocDeclAStr( void, GetTextExtent(const wxString& string, wxCoord *OUTPUT, wxCoord *OUTPUT), "GetTextExtent(wxString string) -> (width, height)", - "Get the width and height of the text using the current font.\n" - "Only works for single line strings."); + "Get the width and height of the text using the current font. Only +works for single line strings.", ""); + DocDeclAStrName( void, GetTextExtent(const wxString& string, wxCoord *OUTPUT, wxCoord *OUTPUT, wxCoord *OUTPUT, wxCoord* OUTPUT, wxFont* font = NULL), "GetFullTextExtent(wxString string, Font font=None) ->\n (width, height, descent, externalLeading)", - "Get the width, height, decent and leading of the text using the current or specified font.\n" - "Only works for single line strings.", + "Get the width, height, decent and leading of the text using the +current or specified font. Only works for single line strings.", "", GetFullTextExtent); @@ -317,12 +591,21 @@ public: void, GetMultiLineTextExtent(const wxString& text, wxCoord *OUTPUT, wxCoord *OUTPUT, wxCoord *OUTPUT, wxFont *font = NULL), - "GetMultiLineTextExtent(wxString string, Font font=None) ->\n (width, height, descent, externalLeading)", - "Get the width, height, decent and leading of the text using the current or specified font.\n" - "Works for single as well as multi-line strings."); + "GetMultiLineTextExtent(wxString string, Font font=None) ->\n (width, height, lineHeight)", + "Get the width, height, and line height of the text using the +current or specified font. Works for single as well as multi-line +strings.", ""); %extend { + DocAStr(GetPartialTextExtents, + "GetPartialTextExtents(self, text) -> [widths]", + "Returns a list of integers such that each value is the distance in +pixels from the begining of text to the coresponding character of +*text*. The generic version simply builds a running total of the widths +of each character using GetTextExtent, however if the various +platforms have a native API function that is faster or more accurate +than the generic implementation then it will be used instead.", ""); wxArrayInt GetPartialTextExtents(const wxString& text) { wxArrayInt widths; self->GetPartialTextExtents(text, widths); @@ -334,7 +617,19 @@ public: // size and resolution // ------------------- - DocStr(GetSize, "Get the DC size in device units."); + DocStr( + GetSize, + "This gets the horizontal and vertical resolution in device units. It +can be used to scale graphics to fit the page. For example, if *maxX* +and *maxY* represent the maximum horizontal and vertical 'pixel' values +used in your application, the following code will scale the graphic to +fit on the printer page:: + + w, h = dc.GetSize() + scaleX = maxX*1.0 / w + scaleY = maxY*1.0 / h + dc.SetUserScale(min(scaleX,scaleY),min(scaleX,scaleY)) +", ""); wxSize GetSize(); DocDeclAName( void, GetSize( int *OUTPUT, int *OUTPUT ), @@ -342,7 +637,7 @@ public: GetSizeTuple); - DocStr(GetSizeMM, "Get the DC size in milimeters."); + DocStr(GetSizeMM, "Get the DC size in milimeters.", ""); wxSize GetSizeMM() const; DocDeclAName( void, GetSizeMM( int *OUTPUT, int *OUTPUT ) const, @@ -354,53 +649,163 @@ public: // coordinates conversions // ----------------------- - // This group of functions does actual conversion of the input, as you'd - // expect. - wxCoord DeviceToLogicalX(wxCoord x) const; - wxCoord DeviceToLogicalY(wxCoord y) const; - wxCoord DeviceToLogicalXRel(wxCoord x) const; - wxCoord DeviceToLogicalYRel(wxCoord y) const; - wxCoord LogicalToDeviceX(wxCoord x) const; - wxCoord LogicalToDeviceY(wxCoord y) const; - wxCoord LogicalToDeviceXRel(wxCoord x) const; - wxCoord LogicalToDeviceYRel(wxCoord y) const; + DocDeclStr( + wxCoord , DeviceToLogicalX(wxCoord x) const, + "Convert device X coordinate to logical coordinate, using the current +mapping mode.", ""); + + DocDeclStr( + wxCoord , DeviceToLogicalY(wxCoord y) const, + "Converts device Y coordinate to logical coordinate, using the current +mapping mode.", ""); + + DocDeclStr( + wxCoord , DeviceToLogicalXRel(wxCoord x) const, + "Convert device X coordinate to relative logical coordinate, using the +current mapping mode but ignoring the x axis orientation. Use this +function for converting a width, for example.", ""); + + DocDeclStr( + wxCoord , DeviceToLogicalYRel(wxCoord y) const, + "Convert device Y coordinate to relative logical coordinate, using the +current mapping mode but ignoring the y axis orientation. Use this +function for converting a height, for example.", ""); + + DocDeclStr( + wxCoord , LogicalToDeviceX(wxCoord x) const, + "Converts logical X coordinate to device coordinate, using the current +mapping mode.", ""); + + DocDeclStr( + wxCoord , LogicalToDeviceY(wxCoord y) const, + "Converts logical Y coordinate to device coordinate, using the current +mapping mode.", ""); + + DocDeclStr( + wxCoord , LogicalToDeviceXRel(wxCoord x) const, + "Converts logical X coordinate to relative device coordinate, using the +current mapping mode but ignoring the x axis orientation. Use this for +converting a width, for example.", ""); + + DocDeclStr( + wxCoord , LogicalToDeviceYRel(wxCoord y) const, + "Converts logical Y coordinate to relative device coordinate, using the +current mapping mode but ignoring the y axis orientation. Use this for +converting a height, for example.", ""); + + // query DC capabilities // --------------------- virtual bool CanDrawBitmap() const; virtual bool CanGetTextExtent() const; - // colour depth - virtual int GetDepth() const; - // Resolution in Pixels per inch - virtual wxSize GetPPI() const; + DocDeclStr( + virtual int , GetDepth() const, + "Returns the colour depth of the DC.", ""); + - virtual bool Ok() const; + DocDeclStr( + virtual wxSize , GetPPI() const, + "Resolution in pixels per inch", ""); + + DocDeclStr( + virtual bool , IsOk() const, + "Returns true if the DC is ok to use.", ""); + %pythoncode { Ok = IsOk } + - int GetBackgroundMode() const; - const wxBrush& GetBackground() const; - const wxBrush& GetBrush() const; - const wxFont& GetFont() const; - const wxPen& GetPen() const; - const wxColour& GetTextBackground() const; - const wxColour& GetTextForeground() const; + DocDeclStr( + int , GetBackgroundMode() const, + "Returns the current background mode, either ``wx.SOLID`` or +``wx.TRANSPARENT``."," - virtual void SetTextForeground(const wxColour& colour); - virtual void SetTextBackground(const wxColour& colour); +:see: `SetBackgroundMode`"); + + DocDeclStr( + const wxBrush& , GetBackground() const, + "Gets the brush used for painting the background."," - int GetMapMode() const; - virtual void SetMapMode(int mode); +:see: `SetBackground`"); + + DocDeclStr( + const wxBrush& , GetBrush() const, + "Gets the current brush", ""); + + DocDeclStr( + const wxFont& , GetFont() const, + "Gets the current font", ""); + + DocDeclStr( + const wxPen& , GetPen() const, + "Gets the current pen", ""); + + DocDeclStr( + const wxColour& , GetTextBackground() const, + "Gets the current text background colour", ""); + + DocDeclStr( + const wxColour& , GetTextForeground() const, + "Gets the current text foreground colour", ""); + + DocDeclStr( + virtual void , SetTextForeground(const wxColour& colour), + "Sets the current text foreground colour for the DC.", ""); + + DocDeclStr( + virtual void , SetTextBackground(const wxColour& colour), + "Sets the current text background colour for the DC.", ""); + - DocDeclA( + DocDeclStr( + int , GetMapMode() const, + "Gets the current *mapping mode* for the device context ", ""); + + DocDeclStr( + virtual void , SetMapMode(int mode), + "The *mapping mode* of the device context defines the unit of +measurement used to convert logical units to device units. The +mapping mode can be one of the following: + + ================ ============================================= + wx.MM_TWIPS Each logical unit is 1/20 of a point, or 1/1440 + of an inch. + wx.MM_POINTS Each logical unit is a point, or 1/72 of an inch. + wx.MM_METRIC Each logical unit is 1 mm. + wx.MM_LOMETRIC Each logical unit is 1/10 of a mm. + wx.MM_TEXT Each logical unit is 1 pixel. + ================ ============================================= +"," +Note that in X, text drawing isn't handled consistently with the +mapping mode; a font is always specified in point size. However, +setting the user scale (see `SetUserScale`) scales the text +appropriately. In Windows, scalable TrueType fonts are always used; in +X, results depend on availability of fonts, but usually a reasonable +match is found. + +The coordinate origin is always at the top left of the screen/printer. + +Drawing to a Windows printer device context uses the current mapping +mode, but mapping mode is currently ignored for PostScript output. +"); + + + + DocDeclAStr( virtual void, GetUserScale(double *OUTPUT, double *OUTPUT) const, - "GetUserScale() -> (xScale, yScale)"); + "GetUserScale(self) -> (xScale, yScale)", + "Gets the current user scale factor (set by `SetUserScale`).", ""); - virtual void SetUserScale(double x, double y); + DocDeclStr( + virtual void , SetUserScale(double x, double y), + "Sets the user scaling factor, useful for applications which require +'zooming'.", ""); + DocDeclA( @@ -417,8 +822,13 @@ public: GetLogicalOriginTuple); virtual void SetLogicalOrigin(wxCoord x, wxCoord y); + %extend { + void SetLogicalOriginPoint(const wxPoint& point) { + self->SetLogicalOrigin(point.x, point.y); + } + } - + wxPoint GetDeviceOrigin() const; DocDeclAName( void, GetDeviceOrigin(wxCoord *OUTPUT, wxCoord *OUTPUT) const, @@ -426,38 +836,173 @@ public: GetDeviceOriginTuple); virtual void SetDeviceOrigin(wxCoord x, wxCoord y); + %extend { + void SetDeviceOriginPoint(const wxPoint& point) { + self->SetDeviceOrigin(point.x, point.y); + } + } + + DocDeclStr( + virtual void , SetAxisOrientation(bool xLeftRight, bool yBottomUp), + "Sets the x and y axis orientation (i.e., the direction from lowest to +highest values on the axis). The default orientation is the natural +orientation, e.g. x axis from left to right and y axis from bottom up.", ""); - virtual void SetAxisOrientation(bool xLeftRight, bool yBottomUp); - int GetLogicalFunction() const; - virtual void SetLogicalFunction(int function); + DocDeclStr( + int , GetLogicalFunction() const, + "Gets the current logical function (set by `SetLogicalFunction`).", ""); + + DocDeclStr( + virtual void , SetLogicalFunction(int function), + "Sets the current logical function for the device context. This +determines how a source pixel (from a pen or brush colour, or source +device context if using `Blit`) combines with a destination pixel in +the current device context. + +The possible values and their meaning in terms of source and +destination pixel values are as follows: + + ================ ========================== + wx.AND src AND dst + wx.AND_INVERT (NOT src) AND dst + wx.AND_REVERSE src AND (NOT dst) + wx.CLEAR 0 + wx.COPY src + wx.EQUIV (NOT src) XOR dst + wx.INVERT NOT dst + wx.NAND (NOT src) OR (NOT dst) + wx.NOR (NOT src) AND (NOT dst) + wx.NO_OP dst + wx.OR src OR dst + wx.OR_INVERT (NOT src) OR dst + wx.OR_REVERSE src OR (NOT dst) + wx.SET 1 + wx.SRC_INVERT NOT src + wx.XOR src XOR dst + ================ ========================== + +The default is wx.COPY, which simply draws with the current +colour. The others combine the current colour and the background using +a logical operation. wx.INVERT is commonly used for drawing rubber +bands or moving outlines, since drawing twice reverts to the original +colour. +", ""); + + + DocDeclStr( + void , ComputeScaleAndOrigin(), + "Performs all necessary computations for given platform and context +type after each change of scale and origin parameters. Usually called +automatically internally after such changes. +", ""); + - virtual void SetOptimization(bool opt); - virtual bool GetOptimization(); + +// DocDeclStr( +// virtual void , SetOptimization(bool optimize), +// "If *optimize* is true this function sets optimization mode on. This +// currently means that under X, the device context will not try to set a +// pen or brush property if it is known to be set already. This approach +// can fall down if non-wxWidgets code is using the same device context +// or window, for example when the window is a panel on which the +// windowing system draws panel items. The wxWidgets device context +// 'memory' will now be out of step with reality. + +// Setting optimization off, drawing, then setting it back on again, is a +// trick that must occasionally be employed.", ""); + +// DocDeclStr( +// virtual bool , GetOptimization(), +// "Returns true if device context optimization is on. See +// `SetOptimization` for details.", ""); + + %pythoncode { + def SetOptimization(self, optimize): + pass + def GetOptimization(self): + return False + SetOptimization = wx._deprecated(SetOptimization) + GetOptimization = wx._deprecated(GetOptimization) + } + // bounding box // ------------ - virtual void CalcBoundingBox(wxCoord x, wxCoord y); - void ResetBoundingBox(); + DocDeclStr( + virtual void , CalcBoundingBox(wxCoord x, wxCoord y), + "Adds the specified point to the bounding box which can be retrieved +with `MinX`, `MaxX` and `MinY`, `MaxY` or `GetBoundingBox` functions.", ""); + + %extend { + DocStr(CalcBoundingBoxPoint, + "Adds the specified point to the bounding box which can be retrieved +with `MinX`, `MaxX` and `MinY`, `MaxY` or `GetBoundingBox` functions.",""); + void CalcBoundingBoxPoint(const wxPoint& point) { + self->CalcBoundingBox(point.x, point.y); + } + } + + DocDeclStr( + void , ResetBoundingBox(), + "Resets the bounding box: after a call to this function, the bounding +box doesn't contain anything.", ""); + // Get the final bounding box of the PostScript or Metafile picture. - wxCoord MinX() const; - wxCoord MaxX() const; - wxCoord MinY() const; - wxCoord MaxY() const; + DocDeclStr( + wxCoord , MinX() const, + "Gets the minimum horizontal extent used in drawing commands so far.", ""); + + DocDeclStr( + wxCoord , MaxX() const, + "Gets the maximum horizontal extent used in drawing commands so far.", ""); + + DocDeclStr( + wxCoord , MinY() const, + "Gets the minimum vertical extent used in drawing commands so far.", ""); + + DocDeclStr( + wxCoord , MaxY() const, + "Gets the maximum vertical extent used in drawing commands so far.", ""); + - DocA(GetBoundingBox, - "GetBoundingBox() -> (x1,y1, x2,y2)"); + DocAStr(GetBoundingBox, + "GetBoundingBox() -> (x1,y1, x2,y2)", + "Returns the min and max points used in drawing commands so far.", ""); %extend { void GetBoundingBox(int* OUTPUT, int* OUTPUT, int* OUTPUT, int* OUTPUT); // See below for implementation } - %pythoncode { def __nonzero__(self): return self.Ok() }; + + %pythoncode { def __nonzero__(self): return self.IsOk() }; + // RTL related functions + // --------------------- + + DocDeclStr( + virtual wxLayoutDirection , GetLayoutDirection() const, + "Get the layout direction (LTR or RTL)_ for this dc. On platforms +where RTL layout is supported, the return value will either be +``wx.Layout_LeftToRight`` or ``wx.Layout_RightToLeft``. +``wx.Layout_Default`` is returned if layout direction is not +supported.", ""); + + DocDeclStr( + virtual void , SetLayoutDirection(wxLayoutDirection dir), + "Change the layout direction for this dc.", ""); + + + + +#ifdef __WXMSW__ + long GetHDC(); +#endif + %extend { // See drawlist.cpp for impplementaion of these... PyObject* _DrawPointList(PyObject* pyCoords, PyObject* pyPens, PyObject* pyBrushes) @@ -493,6 +1038,16 @@ public: %pythoncode { def DrawPointList(self, points, pens=None): + """ + Draw a list of points as quickly as possible. + + :param points: A sequence of 2-element sequences representing + each point to draw, (x,y). + :param pens: If None, then the current pen is used. If a + single pen then it will be used for all points. If + a list of pens then there should be one for each point + in points. + """ if pens is None: pens = [] elif isinstance(pens, wx.Pen): @@ -503,6 +1058,16 @@ public: def DrawLineList(self, lines, pens=None): + """ + Draw a list of lines as quickly as possible. + + :param lines: A sequence of 4-element sequences representing + each line to draw, (x1,y1, x2,y2). + :param pens: If None, then the current pen is used. If a + single pen then it will be used for all lines. If + a list of pens then there should be one for each line + in lines. + """ if pens is None: pens = [] elif isinstance(pens, wx.Pen): @@ -513,6 +1078,18 @@ public: def DrawRectangleList(self, rectangles, pens=None, brushes=None): + """ + Draw a list of rectangles as quickly as possible. + + :param rectangles: A sequence of 4-element sequences representing + each rectangle to draw, (x,y, w,h). + :param pens: If None, then the current pen is used. If a + single pen then it will be used for all rectangles. + If a list of pens then there should be one for each + rectangle in rectangles. + :param brushes: A brush or brushes to be used to fill the rectagles, + with similar semantics as the pens parameter. + """ if pens is None: pens = [] elif isinstance(pens, wx.Pen): @@ -529,6 +1106,18 @@ public: def DrawEllipseList(self, ellipses, pens=None, brushes=None): + """ + Draw a list of ellipses as quickly as possible. + + :param ellipses: A sequence of 4-element sequences representing + each ellipse to draw, (x,y, w,h). + :param pens: If None, then the current pen is used. If a + single pen then it will be used for all ellipses. + If a list of pens then there should be one for each + ellipse in ellipses. + :param brushes: A brush or brushes to be used to fill the ellipses, + with similar semantics as the pens parameter. + """ if pens is None: pens = [] elif isinstance(pens, wx.Pen): @@ -545,8 +1134,20 @@ public: def DrawPolygonList(self, polygons, pens=None, brushes=None): - %## Note: This does not currently support fill style or offset - %## you can always use the non-List version if need be. + """ + Draw a list of polygons, each of which is a list of points. + + :param polygons: A sequence of sequences of sequences. + [[(x1,y1),(x2,y2),(x3,y3)...], + [(x1,y1),(x2,y2),(x3,y3)...]] + + :param pens: If None, then the current pen is used. If a + single pen then it will be used for all polygons. + If a list of pens then there should be one for each + polygon. + :param brushes: A brush or brushes to be used to fill the polygons, + with similar semantics as the pens parameter. + """ if pens is None: pens = [] elif isinstance(pens, wx.Pen): @@ -562,10 +1163,20 @@ public: return self._DrawPolygonList(polygons, pens, brushes) - def DrawTextList(self, textList, coords, foregrounds = None, backgrounds = None, fonts = None): - %## NOTE: this does not currently support changing the font - %## Make sure you set Background mode to wxSolid (DC.SetBackgroundMode) - %## If you want backgounds to do anything. + def DrawTextList(self, textList, coords, foregrounds = None, backgrounds = None): + """ + Draw a list of strings using a list of coordinants for positioning each string. + + :param textList: A list of strings + :param coords: A list of (x,y) positions + :param foregrounds: A list of `wx.Colour` objects to use for the + foregrounds of the strings. + :param backgrounds: A list of `wx.Colour` objects to use for the + backgrounds of the strings. + + NOTE: Make sure you set Background mode to wx.Solid (DC.SetBackgroundMode) + If you want backgrounds to do anything. + """ if type(textList) == type(''): textList = [textList] elif len(textList) != len(coords): @@ -585,6 +1196,37 @@ public: return self._DrawTextList(textList, coords, foregrounds, backgrounds) } + %property(Background, GetBackground, SetBackground, doc="See `GetBackground` and `SetBackground`"); + %property(BackgroundMode, GetBackgroundMode, SetBackgroundMode, doc="See `GetBackgroundMode` and `SetBackgroundMode`"); + %property(BoundingBox, GetBoundingBox, doc="See `GetBoundingBox`"); + %property(Brush, GetBrush, SetBrush, doc="See `GetBrush` and `SetBrush`"); + %property(CharHeight, GetCharHeight, doc="See `GetCharHeight`"); + %property(CharWidth, GetCharWidth, doc="See `GetCharWidth`"); + %property(ClippingBox, GetClippingBox, doc="See `GetClippingBox`"); + %property(ClippingRect, GetClippingRect, SetClippingRect, doc="See `GetClippingRect` and `SetClippingRect`"); + %property(Depth, GetDepth, doc="See `GetDepth`"); + %property(DeviceOrigin, GetDeviceOrigin, SetDeviceOrigin, doc="See `GetDeviceOrigin` and `SetDeviceOrigin`"); + %property(Font, GetFont, SetFont, doc="See `GetFont` and `SetFont`"); + %property(FullTextExtent, GetFullTextExtent, doc="See `GetFullTextExtent`"); + %property(LogicalFunction, GetLogicalFunction, SetLogicalFunction, doc="See `GetLogicalFunction` and `SetLogicalFunction`"); + %property(LogicalOrigin, GetLogicalOrigin, SetLogicalOrigin, doc="See `GetLogicalOrigin` and `SetLogicalOrigin`"); + %property(LogicalScale, GetLogicalScale, SetLogicalScale, doc="See `GetLogicalScale` and `SetLogicalScale`"); + %property(MapMode, GetMapMode, SetMapMode, doc="See `GetMapMode` and `SetMapMode`"); + %property(MultiLineTextExtent, GetMultiLineTextExtent, doc="See `GetMultiLineTextExtent`"); + %property(Optimization, GetOptimization, SetOptimization, doc="See `GetOptimization` and `SetOptimization`"); + %property(PPI, GetPPI, doc="See `GetPPI`"); + %property(PartialTextExtents, GetPartialTextExtents, doc="See `GetPartialTextExtents`"); + %property(Pen, GetPen, SetPen, doc="See `GetPen` and `SetPen`"); + %property(Pixel, GetPixel, doc="See `GetPixel`"); + %property(PixelPoint, GetPixelPoint, doc="See `GetPixelPoint`"); + %property(Size, GetSize, doc="See `GetSize`"); + %property(SizeMM, GetSizeMM, doc="See `GetSizeMM`"); + %property(TextBackground, GetTextBackground, SetTextBackground, doc="See `GetTextBackground` and `SetTextBackground`"); + %property(TextExtent, GetTextExtent, doc="See `GetTextExtent`"); + %property(TextForeground, GetTextForeground, SetTextForeground, doc="See `GetTextForeground` and `SetTextForeground`"); + %property(UserScale, GetUserScale, SetUserScale, doc="See `GetUserScale` and `SetUserScale`"); + + %property(LayoutDirection, GetLayoutDirection, SetLayoutDirection); }; @@ -602,122 +1244,456 @@ static void wxDC_GetBoundingBox(wxDC* dc, int* x1, int* y1, int* x2, int* y2) { //--------------------------------------------------------------------------- %newgroup -class wxMemoryDC : public wxDC { +DocStr(wxDCTextColourChanger, +"wx.DCTextColourChanger can be used to temporarily change the DC text +colour and restore it automatically when the object goes out of scope", ""); + +class wxDCTextColourChanger +{ public: - wxMemoryDC(); - %name(MemoryDCFromDC) wxMemoryDC(wxDC* oldDC); + wxDCTextColourChanger(wxDC& dc, const wxColour& col); + ~wxDCTextColourChanger(); +}; + + +DocStr(wxDCPenChanger, +"wx.DCPenChanger can be used to temporarily change the DC pen and +restore it automatically when the object goes out of scope", ""); - void SelectObject(const wxBitmap& bitmap); +class wxDCPenChanger +{ +public: + wxDCPenChanger(wxDC& dc, const wxPen& pen); + ~wxDCPenChanger(); }; -//--------------------------------------------------------------------------- -%newgroup -%{ -#include -%} +DocStr(wxDCBrushChanger, +"wx.DCBrushChanger can be used to temporarily change the DC brush and +restore it automatically when the object goes out of scope", ""); +class wxDCBrushChanger +{ +public: + wxDCBrushChanger(wxDC& dc, const wxBrush& brush); + ~wxDCBrushChanger(); +}; -class wxBufferedDC : public wxMemoryDC + +DocStr(wxDCClipper, +"wx.wxDCClipper sets the DC's clipping region when it is constructed, +and then automatically destroys the clipping region when the clipper +goes out of scope.", ""); + +class wxDCClipper { public: - %pythonAppend wxBufferedDC - "self._dc = args[0] # save a ref so the other dc will not be deleted before self"; + %nokwargs wxDCClipper; + wxDCClipper(wxDC& dc, const wxRegion& r); + wxDCClipper(wxDC& dc, const wxRect& r); + wxDCClipper(wxDC& dc, wxCoord x, wxCoord y, wxCoord w, wxCoord h); + ~wxDCClipper(); +}; - %nokwargs wxBufferedDC; - - // Construct a wxBufferedDC using a user supplied buffer. - wxBufferedDC( wxDC *dc, const wxBitmap &buffer ); - // Construct a wxBufferedDC with an internal buffer of 'area' - // (where area is usually something like the size of the window - // being buffered) - wxBufferedDC( wxDC *dc, const wxSize &area ); + +//--------------------------------------------------------------------------- +%newgroup + +MustHaveApp(wxScreenDC); + +DocStr(wxScreenDC, +"A wxScreenDC can be used to paint anywhere on the screen. This should +normally be constructed as a temporary stack object; don't store a +wxScreenDC object. +", ""); +class wxScreenDC : public wxDC { +public: + wxScreenDC(); + + DocDeclStrName( + bool , StartDrawingOnTop(wxWindow* window), + "Specify that the area of the screen to be drawn upon coincides with +the given window. + +:see: `EndDrawingOnTop`", "", + StartDrawingOnTopWin); - // TODO: Keep this one too? - %pythonAppend wxBufferedDC( wxDC *dc, const wxSize &area ) - "val._dc = args[0] # save a ref so the other dc will not be deleted before self"; - %name(BufferedDCInternalBuffer) wxBufferedDC( wxDC *dc, const wxSize &area ); + DocDeclStr( + bool , StartDrawingOnTop(wxRect* rect = NULL), + "Specify that the area is the given rectangle, or the whole screen if +``None`` is passed. + +:see: `EndDrawingOnTop`", ""); - // The buffer is blit to the real DC when the BufferedDC is destroyed. - ~wxBufferedDC(); + DocDeclStr( + bool , EndDrawingOnTop(), + "Use this in conjunction with `StartDrawingOnTop` or +`StartDrawingOnTopWin` to ensure that drawing to the screen occurs on +top of existing windows. Without this, some window systems (such as X) +only allow drawing to take place underneath other windows. + +You might use this pair of functions when implementing a drag feature, +for example as in the `wx.SplitterWindow` implementation. + +These functions are probably obsolete since the X implementations +allow drawing directly on the screen now. However, the fact that this +function allows the screen to be refreshed afterwards may be useful +to some applications.", ""); - // Blits the buffer to the dc, and detaches the dc from - // the buffer. Usually called in the dtor or by the dtor - // of derived classes if the BufferedDC must blit before - // the derived class (which may own the dc it's blitting - // to) is destroyed. - void UnMask(); }; +//--------------------------------------------------------------------------- +%newgroup +MustHaveApp(wxWindowDC); +DocStr(wxWindowDC, + "A wx.WindowDC must be constructed if an application wishes to paint on +the whole area of a window (client and decorations). This should +normally be constructed as a temporary stack object; don't store a +wx.WindowDC object.",""); +class wxWindowDC : public wxDC { +public: + DocCtorStr( + wxWindowDC(wxWindow* win), + "Constructor. Pass the window on which you wish to paint.",""); +}; -// Creates a double buffered wxPaintDC, optionally allowing the -// user to specify their own buffer to use. -class wxBufferedPaintDC : public wxBufferedDC -{ +//--------------------------------------------------------------------------- +%newgroup + +MustHaveApp(wxClientDC); + +DocStr(wxClientDC, +"A wx.ClientDC must be constructed if an application wishes to paint on +the client area of a window from outside an EVT_PAINT event. This should +normally be constructed as a temporary stack object; don't store a +wx.ClientDC object long term. + +To draw on a window from within an EVT_PAINT handler, construct a +`wx.PaintDC` object. + +To draw on the whole window including decorations, construct a +`wx.WindowDC` object (Windows only). +", ""); +class wxClientDC : public wxWindowDC { public: + DocCtorStr( + wxClientDC(wxWindow* win), + "Constructor. Pass the window on which you wish to paint.", ""); +}; + +//--------------------------------------------------------------------------- +%newgroup - // If no bitmap is supplied by the user, a temporary one will be created. - wxBufferedPaintDC( wxWindow *window, const wxBitmap &buffer = wxNullBitmap ); +MustHaveApp(wxPaintDC); +DocStr(wxPaintDC, +"A wx.PaintDC must be constructed if an application wishes to paint on +the client area of a window from within an EVT_PAINT event +handler. This should normally be constructed as a temporary stack +object; don't store a wx.PaintDC object. If you have an EVT_PAINT +handler, you **must** create a wx.PaintDC object within it even if you +don't actually use it. + +Using wx.PaintDC within EVT_PAINT handlers is important because it +automatically sets the clipping area to the damaged area of the +window. Attempts to draw outside this area do not appear. + +To draw on a window from outside EVT_PAINT handlers, construct a +`wx.ClientDC` object. +",""); +class wxPaintDC : public wxClientDC { +public: + DocCtorStr( + wxPaintDC(wxWindow* win), + "Constructor. Pass the window on which you wish to paint.", ""); }; + //--------------------------------------------------------------------------- %newgroup -class wxScreenDC : public wxDC { +MustHaveApp(wxMemoryDC); + +DocStr(wxMemoryDC, +"A memory device context provides a means to draw graphics onto a +bitmap. A bitmap must be selected into the new memory DC before it may +be used for anything. Typical usage is as follows:: + + dc = wx.MemoryDC() + dc.SelectObject(bitmap) + # draw on the dc using any of the Draw methods + dc.SelectObject(wx.NullBitmap) + # the bitmap now contains wahtever was drawn upon it + +Note that the memory DC *must* be deleted (or the bitmap selected out +of it) before a bitmap can be reselected into another memory DC. +", ""); + +class wxMemoryDC : public wxWindowDC { public: - wxScreenDC(); + DocCtorStr( + wxMemoryDC(wxBitmap& bitmap = wxNullBitmap), + "Constructs a new memory device context. + +Use the Ok member to test whether the constructor was successful in +creating a usable device context. If a bitmap is not given to this +constructor then don't forget to select a bitmap into the DC before +drawing on it.", " + +:see: `MemoryDCFromDC`"); + + DocCtorStrName( + wxMemoryDC(wxDC* oldDC), + "Creates a DC that is compatible with the oldDC.", "", + MemoryDCFromDC); - %name(StartDrawingOnTopWin) bool StartDrawingOnTop(wxWindow* window); - bool StartDrawingOnTop(wxRect* rect = NULL); - bool EndDrawingOnTop(); + + DocDeclStr( + void , SelectObject(wxBitmap& bitmap), + "Selects the bitmap into the device context, to use as the memory +bitmap. Selecting the bitmap into a memory DC allows you to draw into +the DC, and therefore the bitmap, and also to use Blit to copy the +bitmap to a window. + +If the argument is wx.NullBitmap (or some other uninitialised +`wx.Bitmap`) the current bitmap is selected out of the device context, +and the original bitmap restored, allowing the current bitmap to be +destroyed safely.", ""); + + + DocDeclStr( + void , SelectObjectAsSource(const wxBitmap& bmp), + "", ""); + + }; + //--------------------------------------------------------------------------- %newgroup -class wxClientDC : public wxDC { + +%{ +#include +%} + +enum { + wxBUFFER_VIRTUAL_AREA, + wxBUFFER_CLIENT_AREA +}; + +MustHaveApp(wxBufferedDC); + +DocStr(wxBufferedDC, +"This simple class provides a simple way to avoid flicker: when drawing +on it, everything is in fact first drawn on an in-memory buffer (a +`wx.Bitmap`) and then copied to the screen only once, when this object +is destroyed. You can either provide a buffer bitmap yourself, and +reuse it the next time something needs painted, or you can let the +buffered DC create and provide a buffer bitmap itself. + +Buffered DCs can be used in the same way as any other device context. +wx.BufferedDC itself typically replaces `wx.ClientDC`, if you want to +use it in your EVT_PAINT handler, you should look at +`wx.BufferedPaintDC`. You can also use a wx.BufferedDC without +providing a target DC. In this case the operations done on the dc +will only be written to the buffer bitmap and *not* to any window, so +you will want to have provided the buffer bitmap and then reuse it +when it needs painted to the window. + +Please note that GTK+ 2.0 and OS X provide double buffering themselves +natively. You may want to use `wx.Window.IsDoubleBuffered` to +determine whether you need to use buffering or not, or use +`wx.AutoBufferedPaintDC` to avoid needless double buffering on systems +that already do it automatically. + + +", ""); + +class wxBufferedDC : public wxMemoryDC +{ public: - wxClientDC(wxWindow* win); + + DocStr( + wxBufferedDC, + "Constructs a buffered DC.", " + + :param dc: The underlying DC: everything drawn to this object will + be flushed to this DC when this object is destroyed. You may + pass ``None`` in order to just initialize the buffer, and not + flush it. + + :param buffer: If a `wx.Size` object is passed as the 2nd arg then + it is the size of the bitmap that will be created internally + and used for an implicit buffer. If the 2nd arg is a + `wx.Bitmap` then it is the explicit buffer that will be + used. Using an explicit buffer is the most efficient solution + as the bitmap doesn't have to be recreated each time but it + also requires more memory as the bitmap is never freed. The + bitmap should have appropriate size, anything drawn outside of + its bounds is clipped. If wx.NullBitmap is used then a new + buffer will be allocated that is the same size as the dc. + + :param style: The style parameter indicates whether the supplied buffer is + intended to cover the entire virtual size of a `wx.ScrolledWindow` or + if it only covers the client area. Acceptable values are + ``wx.BUFFER_VIRTUAL_AREA`` and ``wx.BUFFER_CLIENT_AREA``. +"); + + %nokwargs wxBufferedDC; + %pythonAppend wxBufferedDC +"# save a ref so the other dc will not be deleted before self + self.__dc = args[0] + # also save a ref to the bitmap + if len(args) > 1: self.__bmp = args[1] +"; + + wxBufferedDC( wxDC* dc, + wxBitmap& buffer=wxNullBitmap, + int style = wxBUFFER_CLIENT_AREA ); + wxBufferedDC( wxDC* dc, + const wxSize& area, + int style = wxBUFFER_CLIENT_AREA ); +// wxBufferedDC(wxWindow* win, +// wxDC *dc, +// const wxSize &area, +// int style = wxBUFFER_CLIENT_AREA); + + + DocCtorStr( + ~wxBufferedDC(), + "Copies everything drawn on the DC so far to the underlying DC +associated with this object, if any.", ""); + + + DocDeclStr( + void , UnMask(), + "Blits the buffer to the dc, and detaches the dc from the buffer (so it +can be effectively used once only). This is usually only called in +the destructor.", ""); + + // Set and get the style + void SetStyle(int style); + int GetStyle() const; }; -//--------------------------------------------------------------------------- -%newgroup -class wxPaintDC : public wxDC { + + +MustHaveApp(wxBufferedPaintDC); + +DocStr(wxBufferedPaintDC, +"This is a subclass of `wx.BufferedDC` which can be used inside of an +EVT_PAINT event handler. Just create an object of this class instead +of `wx.PaintDC` and that's all you have to do to (mostly) avoid +flicker. The only thing to watch out for is that if you are using this +class together with `wx.ScrolledWindow`, you probably do **not** want +to call `wx.Window.PrepareDC` on it as it already does this internally +for the real underlying `wx.PaintDC`. + +If your window is already fully buffered in a `wx.Bitmap` then your +EVT_PAINT handler can be as simple as just creating a +``wx.BufferedPaintDC`` as it will `Blit` the buffer to the window +automatically when it is destroyed. For example:: + + def OnPaint(self, event): + dc = wx.BufferedPaintDC(self, self.buffer) + + +", ""); + +class wxBufferedPaintDC : public wxBufferedDC +{ public: - wxPaintDC(wxWindow* win); + + %pythonAppend wxBufferedPaintDC "if len(args) > 1: self.__bmp = args[1]"; + + DocCtorStr( + wxBufferedPaintDC( wxWindow *window, + wxBitmap &buffer = wxNullBitmap, + int style = wxBUFFER_CLIENT_AREA), + "Create a buffered paint DC. As with `wx.BufferedDC`, you may either +provide the bitmap to be used for buffering or let this object create +one internally (in the latter case, the size of the client part of the +window is automatically used).", ""); + }; //--------------------------------------------------------------------------- %newgroup -class wxWindowDC : public wxDC { +// Epydoc doesn't like this for some strange reason... +// %pythoncode { +// if 'wxMac' in wx.PlatformInfo or 'gtk2' in wx.PlatformInfo: +// _AutoBufferedPaintDCBase = PaintDC +// else: +// _AutoBufferedPaintDCBase = BufferedPaintDC + +// class AutoBufferedPaintDC(_AutoBufferedPaintDCBase): +// """ +// If the current platform double buffers by default then this DC is the +// same as a plain `wx.PaintDC`, otherwise it is a `wx.BufferedPaintDC`. + +// :see: `wx.AutoBufferedPaintDCFactory` +// """ +// def __init__(self, window): +// _AutoBufferedPaintDCBase.__init__(self, window) +// } + + +DocStr(wxAutoBufferedPaintDC, +"If the current platform double buffers by default then this DC is the +same as a plain `wx.PaintDC`, otherwise it is a `wx.BufferedPaintDC`. + +:see: `wx.AutoBufferedPaintDCFactory` +", ""); + +class wxAutoBufferedPaintDC: public wxDC +{ public: - wxWindowDC(wxWindow* win); + wxAutoBufferedPaintDC(wxWindow* win); }; + +%newobject wxAutoBufferedPaintDCFactory; +DocDeclStr( + wxDC* , wxAutoBufferedPaintDCFactory(wxWindow* window), + "Checks if the window is natively double buffered and will return a +`wx.PaintDC` if it is, a `wx.BufferedPaintDC` otherwise. The advantage of +this function over `wx.AutoBufferedPaintDC` is that this function will check +if the the specified window has double-buffering enabled rather than just +going by platform defaults.", ""); + + + //--------------------------------------------------------------------------- %newgroup +MustHaveApp(wxMirrorDC); + +DocStr(wxMirrorDC, +"wx.MirrorDC is a simple wrapper class which is always associated with a +real `wx.DC` object and either forwards all of its operations to it +without changes (no mirroring takes place) or exchanges x and y +coordinates which makes it possible to reuse the same code to draw a +figure and its mirror -- i.e. reflection related to the diagonal line +x == y.", ""); class wxMirrorDC : public wxDC { public: - // constructs a mirror DC associated with the given real DC - // - // if mirror parameter is True, all vertical and horizontal coordinates are - // exchanged, otherwise this class behaves in exactly the same way as a - // plain DC - // - wxMirrorDC(wxDC& dc, bool mirror); + DocCtorStr( + wxMirrorDC(wxDC& dc, bool mirror), + "Creates a mirrored DC associated with the real *dc*. Everything drawn +on the wx.MirrorDC will appear on the *dc*, and will be mirrored if +*mirror* is True.",""); }; //--------------------------------------------------------------------------- @@ -727,24 +1703,41 @@ public: #include %} +MustHaveApp(wxPostScriptDC); + +DocStr(wxPostScriptDC, +"This is a `wx.DC` that can write to PostScript files on any platform.",""); + class wxPostScriptDC : public wxDC { public: - wxPostScriptDC(const wxPrintData& printData); -// %name(PostScriptDC2)wxPostScriptDC(const wxString& output, -// bool interactive = True, -// wxWindow* parent = NULL); + DocCtorStr( + wxPostScriptDC(const wxPrintData& printData), + "Constructs a PostScript printer device context from a `wx.PrintData` +object.", ""); wxPrintData& GetPrintData(); void SetPrintData(const wxPrintData& data); - static void SetResolution(int ppi); - static int GetResolution(); + DocDeclStr( + static void , SetResolution(int ppi), + "Set resolution (in pixels per inch) that will be used in PostScript +output. Default is 720ppi.", ""); + + DocDeclStr( + static int , GetResolution(), + "Return resolution used in PostScript output.", ""); + + %property(PrintData, GetPrintData, SetPrintData, doc="See `GetPrintData` and `SetPrintData`"); }; //--------------------------------------------------------------------------- %newgroup +MustHaveApp(wxMetaFile); +MustHaveApp(wxMetaFileDC); + + #if defined(__WXMSW__) || defined(__WXMAC__) %{ @@ -756,7 +1749,8 @@ public: wxMetaFile(const wxString& filename = wxPyEmptyString); ~wxMetaFile(); - bool Ok(); + bool IsOk(); + %pythoncode { Ok = IsOk } bool SetClipboard(int width = 0, int height = 0); wxSize GetSize(); @@ -767,7 +1761,7 @@ public: const wxString& GetFileName() const; #endif - %pythoncode { def __nonzero__(self): return self.Ok() } + %pythoncode { def __nonzero__(self): return self.IsOk() } }; // bool wxMakeMetaFilePlaceable(const wxString& filename, @@ -819,16 +1813,13 @@ public: //--------------------------------------------------------------------------- +MustHaveApp(wxPrinterDC); + #if defined(__WXMSW__) || defined(__WXMAC__) class wxPrinterDC : public wxDC { public: wxPrinterDC(const wxPrintData& printData); -// %name(PrinterDC2) wxPrinterDC(const wxString& driver, -// const wxString& device, -// const wxString& output, -// bool interactive = True, -// int orientation = wxPORTRAIT); }; #else @@ -838,65 +1829,14 @@ public: wxPrinterDC(const wxPrintData&) { wxPyRaiseNotImplemented(); } -// wxPrinterDC(const wxString&, const wxString&, const wxString&, bool, int) -// { wxPyRaiseNotImplemented(); } }; %} class wxPrinterDC : public wxDC { public: wxPrinterDC(const wxPrintData& printData); -// %name(PrinterDC2) wxPrinterDC(const wxString& driver, -// const wxString& device, -// const wxString& output, -// bool interactive = True, -// int orientation = wxPORTRAIT); }; #endif //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- - -// Now define some Python classes that rename the Draw methods to be -// compatible with the DC Draw methods in 2.4. See also wxPython/_wx.py. - - -%define MAKE_OLD_DC_CLASS(classname) - %pythoncode { - class classname##_old(classname): - """DC class that has methods with 2.4 compatible parameters.""" - FloodFill = classname.FloodFillXY - GetPixel = classname.GetPixelXY - DrawLine = classname.DrawLineXY - CrossHair = classname.CrossHairXY - DrawArc = classname.DrawArcXY - DrawCheckMark = classname.DrawCheckMarkXY - DrawEllipticArc = classname.DrawEllipticArcXY - DrawPoint = classname.DrawPointXY - DrawRectangle = classname.DrawRectangleXY - DrawRoundedRectangle = classname.DrawRoundedRectangleXY - DrawCircle = classname.DrawCircleXY - DrawEllipse = classname.DrawEllipseXY - DrawIcon = classname.DrawIconXY - DrawBitmap = classname.DrawBitmapXY - DrawText = classname.DrawTextXY - DrawRotatedText = classname.DrawRotatedTextXY - Blit = classname.BlitXY - } -%enddef - -MAKE_OLD_DC_CLASS(DC); -MAKE_OLD_DC_CLASS(MemoryDC); -MAKE_OLD_DC_CLASS(BufferedDC); -MAKE_OLD_DC_CLASS(BufferedPaintDC); -MAKE_OLD_DC_CLASS(ScreenDC); -MAKE_OLD_DC_CLASS(ClientDC); -MAKE_OLD_DC_CLASS(PaintDC); -MAKE_OLD_DC_CLASS(WindowDC); -MAKE_OLD_DC_CLASS(MirrorDC); -MAKE_OLD_DC_CLASS(PostScriptDC); -MAKE_OLD_DC_CLASS(MetaFileDC); -MAKE_OLD_DC_CLASS(PrinterDC); - - -//---------------------------------------------------------------------------