X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/ce3ed50dbe32d118321082db84c3a9abb047d5b7..8f974c520a8733158591891458fda10fae4c3950:/docs/html/faqmsw.htm diff --git a/docs/html/faqmsw.htm b/docs/html/faqmsw.htm index e187e48325..be0f8d9091 100644 --- a/docs/html/faqmsw.htm +++ b/docs/html/faqmsw.htm @@ -8,10 +8,10 @@ - +
- @@ -23,17 +23,41 @@ wxWindows 2 for Windows FAQ See also top-level FAQ page.
-

Is Windows 3.1 supported?

+

Which Windows platforms are supported?

-Yes! Unlike Microsoft, we have not forgotten users of 16-bit Windows. Most features +wxWindows 2 can be used to develop and deliver applications on Windows 3.1, Win32s, +Windows 95, Windows 98, and Windows NT. A Windows CE version is being looked into (see below).

+ +wxWindows 2 is designed to make use of WIN32 features and controls. However, unlike Microsoft, +we have not forgotten users of 16-bit Windows. Most features work under Windows 3.1, including wxTreeCtrl and wxListCtrl using the generic implementation. -However, don't expect Windows 95-specific classes to work, such as wxTaskBar. The wxRegConfig +However, don't expect very Windows-95-specific classes to work, such as wxTaskBarIcon. The wxRegConfig class doesn't work either because the Windows 3.1 registry is very simplistic. Check out the 16-bit makefiles to see what other files have been left out.

16-bit compilation is supported under Visual C++ 1.5, and Borland BC++ 4 to 5.

+wxWindows 2 for Windows will also compile on Unix with gcc using TWIN32 from Willows, +although TWIN32 is still in a preliminary state. The resulting executables are +Unix binaries that work with the TWIN32 Windows API emulator.

+ +You can also compile wxWindows 2 for Windows on Unix with Cygwin or Mingw32, resulting +in executables that will run on Windows. So in theory you could write your applications +using wxGTK or wxMotif, then check/debug your wxWindows for Windows +programs with TWIN32, and finally produce an ix86 Windows executable using Cygwin/Mingw32, +without ever needing a copy of Microsoft Windows. See the Technical Note on the Web site detailing cross-compilation.

+ +

What about Windows CE?

+ +This is under consideration, though we need to get wxWindows Unicode-aware first. +There are other interesting issues, such as how to combine the menubar and toolbar APIs +as Windows CE requires. But there's no doubt that it will be possible, albeit +by mostly cutting down wxWindows 2 API functionality, and adding a few classes here +and there. Since wxWindows for 2 produces small binaries (less than 300K for +the statically-linked 'minimal' sample), shoehorning wxWindows 2 into a Windows CE device's limited +storage should not be a problem.

+

What compilers are supported?

Please see the wxWindows 2 for Windows install.txt file for up-to-date information, but @@ -77,19 +101,171 @@ Watcom C++ is a little slow and the debugger is not really up to today's standar

Is Unicode supported?

-No, although there are other internationalisation features.

+Not yet, although there are other internationalisation features.

However, the issues surrounding Unicode support have been looked into so we know what we need to do, and have some header files ready to use containing appropriate type definitions. Just about every file in wxWindows will need changes, due to the pervasive nature of characters and character arrays. Unicode support is needed -for the port to Windows CE (see below).

+for the port to Windows CE (see above), and will probably be added in time for version 2.1.

-

What about Windows CE?

+

Can you compile wxWindows 2 as a DLL?

-This is under consideration, though we need to get wxWindows Unicode-aware first. -There are other interesting issues, such as how to combine the menubar and toolbar APIs -as Windows CE requires.

+Yes (using the Visual C++ or Borland C++ makefile), but be aware that distributing DLLs is a thorny issue +and you may be better off compiling statically-linked applications, unless you're +delivering a suite of separate programs, or you're compiling a lot of wxWindows applications +and have limited hard disk space.

+ +With a DLL approach, and with different versions and configurations of wxWindows +needing to be catered for, the end user may end up with a host of large DLLs in his or her Windows system directory, +negating the point of using DLLs. Of course, this is not a problem just associated with +wxWindows! +

+ +

How can I reduce executable size?

+ +You can compile wxWindows as a DLL (see above, VC++/BC++ only at present). You should also +compile your programs for release using non-debugging and space-optimisation options, but +take with VC++ 5/6 space optimisation: it can sometimes cause problems.

+ +Statically-linked wxWindows 2 programs are smaller than wxWindows 1.xx programs, because of the way +wxWindows 2 has been designed to reduce dependencies between classes, and other +techniques. The linker will not include code from the library that is not (directly or +indirectly) referenced +by your application. So for example, the 'minimal' sample is less than 300KB using VC++ 6.

+ +If you want to distribute really small executables, you can +use Petite +by Ian Luck. This nifty utility compresses Windows executables by around 50%, so your 500KB executable +will shrink to a mere 250KB. With this sort of size, there is reduced incentive to +use DLLs.

+ +

Is wxWindows compatible with MFC?

+ +There is a sample which demonstrates MFC and wxWindows code co-existing in the same +application. However, don't expect to be able to enable wxWindows windows with OLE-2 +functionality using MFC.

+ +

Why do I sometimes get bizarre crash problems using VC++ 5/6?

+ +Some crash problems can be due to inconsistent compiler +options (and of course this isn't limited to wxWindows). +If strange/weird/impossible things start to happen please +check (dumping IDE project file as makefile and doing text comparison +if necessary) that the project settings, especially the list of defined +symbols, struct packing, etc. are exactly the same for all items in +the project. After this, delete everything (including PCH) and recompile.

+ +VC++ 5's optimization code seems to be broken and can +cause problems: this can be seen when deleting an object Dialog +Editor, in Release mode with optimizations on. If in doubt, +switch off optimisations, although this will result in much +larger executables. It seems possible that the library can be created with +strong optimization, so long as the application is not strongly +optimized. For example, in wxWindows project, set to 'Minimum +Size'. In Dialog Editor project, set to 'Customize: Favor Small +Code' (and no others). This will then work.

+ +

How are the wxWindows makefiles edited under Windows?

+ +As of wxWindows 2.1, there is a new system written by Vadim Zeitlin, that +generates the makefiles from templates using tmake.

+ +Here are Vadim's notes:

+ +

+To use these new makefiles, you don't need anything (but see below). +However, you should NOT modify them because these files will be +rewritten when I regenerate them using tmake the next time. So, if +you find a problem with any of these makefiles (say, makefile.b32) +you'll need to modify the corresponding template (b32.t in this +example) and regenerate the makefile using tmake.

+ +tmake can be found at +www.troll.no/freebies/tmake.html. +It's a Perl5 program and so it needs Perl (doh). There is a binary for +Windows (available from the same page), but I haven't used it, so +I don't know if it works as flawlessly as "perl tmake" does (note +for people knowing Perl: don't try to run tmake with -w, it won't +do you any good). Using it extremely simple: to regenerate makefile.b32 +just go to distrib/msw/tmake and type

+ +

tmake -t b32 wxwin.pro -o ../../src/msw/makefile.b32

+ +The makefiles are untested - I don't have any of Borland, Watcom or +Symantec and I don't have enough diskspace to recompile even with +VC6 using makefiles. The new makefiles are as close as possible to the +old ones, but not closer: in fact, there has been many strange things +(should I say bugs?) in some of makefiles, some files were not compiled +without any reason etc. Please test them and notify me about any problems. +Better yet, modify the template files to generate the correct makefiles +and check them in.

+ +The templates are described in tmake ref manual (1-2 pages of text) +and are quite simple. They do contain some Perl code, but my Perl is +primitive (very C like) so it should be possible for anybody to make +trivial modifications to it (I hope that only trivial modifications +will be needed). I've tagged the ol makefiles as MAKEFILES_WITHOUT_TMAKE +in the cvs, so you can always retrieve them and compare the new ones, +this will make it easier to solve the problems you might have.

+ +Another important file is filelist.txt: it contains the list of all +files to be compiled. Some of them are only compiled in 16/32 bit mode. +Some other are only compiled with some compilers (others can't compile +them) - all this info is contained in this file.

+ +So now adding a new file to wxWindows is as easy as modifying filelist.txt +(and Makefile.ams for Unix ports) and regenerating the makefiles - no +need to modify all files manually any more.

+ + Finally, there is also a file vc6.t which I use myself: this one +generates a project file for VC++ 6.0 (I didn't create vc5.t because +I don't need it and can't test it, but it should be trivial to create +one from vc6.t - probably the only things to change would be the +version number in the very beginning and the /Z option - VC5 doesn't +support edit-and=continue). This is not an officially supported way +of building wxWindows (that is, nobody guarantees that it will work), +but it has been very useful to me and I hope it will be also for +others. To generate wxWindows.dsp run

+ +

tmake -t vc6 wxwin.pro -o ../../wxWindows.dsp

+ +Then just include this project in any workspace or open it from VC IDE +and it will create a new workspace for you.

+ +If all goes well, I'm planning to create a template file for Makefile.ams +under src/gtk and src/motif and also replace all makefiles in the samples +subdirectories with the project files from which all the others will be +generated. At least it will divide the number of files in samples +directory by 10 (and the number of files to be maintained too). +

+ +

+ +

How do you use VC++'s memory leak checking instead of that in wxWindows?

+ +Vadim Zeitlin: + +
+On the VC++ level, it's just the matter of calling _CrtSetDbgFlag() in the very
+beginning of the program. In wxWindows, this is done automatically when
+compiling with VC++ in debug mode unless wxUSE_GLOBAL_MEMORY_OPERATORS or
+__NO_VC_CRTDBG__ are defined - this check is done in wx/msw/msvcrt.h which
+is included from app.cpp which then calls wxCrtSetDbgFlag() without any
+#ifdefs.
+
+This works quite well: at the end of the program, all leaked blocks with their
+malloc count are shown. This number (malloc count) can be used to determine
+where exactly the object was allocated: for this it's enough to set the variable
+_crtBreakAlloc (look in VC98\crt\srs\dbgheap.c line 326) to this number and
+a breakpoint will be triggered when the block with this number is allocated.
+
+For simple situations it works like a charm. For something more complicated
+like reading uninitialized memory a specialized tool is probably better...
+
+Regards,
+VZ
+
- + + wxWindows 2 for Windows FAQ