X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/c53a2bb3d355541c2491ff0491eb8f19b241a38d..0e300ddd7d91d46e3d9fcbbefe916b0fda6fcbbc:/docs/latex/wx/file.tex

diff --git a/docs/latex/wx/file.tex b/docs/latex/wx/file.tex
index 172667c788..943240de4b 100644
--- a/docs/latex/wx/file.tex
+++ b/docs/latex/wx/file.tex
@@ -5,6 +5,8 @@ minimize the overhead of using it - in fact, there is hardly any overhead at
 all, but using it brings you automatic error checking and hides differences
 between platforms and compilers. wxFile also automatically closes the file in
 its destructor making it unnecessary to worry about forgetting to do it.
+wxFile is a wrapper around {\tt file descriptor.} - see also 
+\helpref{wxFFile}{wxffile} for a wrapper around {\tt FILE} structure.
 
 \wxheading{Derived from}
 
@@ -18,7 +20,6 @@ None.
 
 wx/file.h defines the following constants:
 
-{\small
 \begin{verbatim}
 #define wxS_IRUSR 00400
 #define wxS_IWUSR 00200
@@ -35,13 +36,12 @@ wx/file.h defines the following constants:
 // default mode for the new files: corresponds to umask 022
 #define wxS_DEFAULT  (wxS_IRUSR | wxS_IWUSR | wxS_IRGRP | wxS_IWGRP | wxS_IROTH | wxS_IWOTH)
 \end{verbatim}
-}
 
 These constants define the file access rights and are used with 
 \helpref{wxFile::Create}{wxfilecreate} and \helpref{wxFile::Open}{wxfileopen}.
 
 The {\it OpenMode} enumeration defines the different modes for opening a file,
-it's defined inside wxFile class so its members should be specified with {\it wxFile::} scope
+it is defined inside wxFile class so its members should be specified with {\it wxFile::} scope
 resolution prefix. It is also used with \helpref{wxFile::Access}{wxfileaccess} function.
 
 \twocolwidtha{7cm}
@@ -52,7 +52,8 @@ or test if it can be opened for writing with Access()}
 \twocolitem{{\bf wxFile::read\_write}}{Open file for reading and writing; can not be used with Access()}
 \twocolitem{{\bf wxFile::write\_append}}{Open file for appending: the file is opened for writing, but the old
 contents of the file is not erased and the file pointer is initially placed at the end of the file;
-can not be used with Access()}
+can not be used with Access(). This is the same as {\bf wxFile::write} if the
+file doesn't exist.}
 \end{twocollist}
 
 Other constants defined elsewhere but used by wxFile functions are wxInvalidOffset which represents an
@@ -114,7 +115,7 @@ values of wxFile::read or wxFile::write really make sense here.
 
 Attaches an existing file descriptor to the wxFile object. Example of predefined
 file descriptors are 0, 1 and 2 which correspond to stdin, stdout and stderr (and
-have symbolic names of wxFile::fd\_stdin, wxFile::fd\_stdout and wxFile::fd\_stderr).
+have symbolic names of {\bf wxFile::fd\_stdin}, {\bf wxFile::fd\_stdout} and {\bf wxFile::fd\_stderr}).
 
 The descriptor should be already opened and it will be closed by wxFile
 object.
@@ -160,7 +161,10 @@ in the file.
 
 Note also that this function doesn't work on unseekable file descriptors
 (examples include pipes, terminals and sockets under Unix) and an attempt to
-use it will result in an error message in such case.
+use it will result in an error message in such case. So, to read the entire
+file into memory, you should write a loop which uses 
+\helpref{Read}{wxfileread} repeatedly and tests its return condition instead
+of using Eof() as this will not work for special files under Unix.
 
 \membersection{wxFile::Exists}\label{wxfileexists}
 
@@ -254,11 +258,11 @@ The actual offset position achieved, or wxInvalidOffset on failure.
 \constfunc{off\_t}{Tell}{\void}
 
 Returns the current position or wxInvalidOffset if file is not opened or if another
-error occured.
+error occurred.
 
 \membersection{wxFile::Write}\label{wxfilewrite}
 
-\func{bool}{Write}{\param{const void*}{ buffer}, \param{off\_t}{ count}}
+\func{size\_t}{Write}{\param{const void*}{ buffer}, \param{off\_t}{ count}}
 
 Writes the specified number of bytes from a buffer.
 
@@ -270,20 +274,24 @@ Writes the specified number of bytes from a buffer.
 
 \wxheading{Return value}
 
-TRUE if the operation was successful.
+the number of bytes actually written
 
 \membersection{wxFile::Write}\label{wxfilewrites}
 
-\func{bool}{Write}{\param{const wxString\& }{s}}
+\func{bool}{Write}{\param{const wxString\& }{s}, \param{wxMBConv&}{ conv = wxConvLibc}}
 
 Writes the contents of the string to the file, returns TRUE on success.
 
+The second argument is only meaningful in Unicode build of wxWindows when
+{\it conv} is used to convert {\it s} to multibyte representation.
+
 \section{\class{wxFFile}}\label{wxffile}
 
-A wxFFile performs raw file I/O. This is a very small class designed to
+wxFFile implements buffered file I/O. This is a very small class designed to
 minimize the overhead of using it - in fact, there is hardly any overhead at
 all, but using it brings you automatic error checking and hides differences
-between platforms and compilers.
+between platforms and compilers. It wraps inside it a {\tt FILE *} handle used
+by standard C IO library (also known as {\tt stdio}).
 
 \wxheading{Derived from}
 
@@ -323,7 +331,10 @@ Opens a file with the given file pointer, which has already been opened.
 
 \docparam{filename}{The filename.}
 
-\docparam{mode}{The mode in which to open the file using standard C strings.}
+\docparam{mode}{The mode in which to open the file using standard C strings.
+Note that you should use {\tt "b"} flag if you use binary files under Windows
+or the results might be unexpected due to automatic newline conversion done
+for the text files.}
 
 \docparam{fp}{An existing file descriptor, such as stderr.}
 
@@ -452,7 +463,7 @@ Returns the current position.
 
 \membersection{wxFFile::Write}\label{wxffilewrite}
 
-\func{size_t}{Write}{\param{const void*}{ buffer}, \param{size\_t}{ count}}
+\func{size\_t}{Write}{\param{const void*}{ buffer}, \param{size\_t}{ count}}
 
 Writes the specified number of bytes from a buffer.
 
@@ -468,7 +479,10 @@ Number of bytes written.
 
 \membersection{wxFFile::Write}\label{wxffilewrites}
 
-\func{bool}{Write}{\param{const wxString\& }{s}}
+\func{bool}{Write}{\param{const wxString\& }{s}, \param{wxMBConv&}{ conv = wxConvLibc}}
 
 Writes the contents of the string to the file, returns TRUE on success.
 
+The second argument is only meaningful in Unicode build of wxWindows when
+{\it conv} is used to convert {\it s} to multibyte representation.
+