X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/b2cf617cb8160a92696f1421675963aa00cb0c2b..6a121452ee63c7cfce8d2907e6209397dc9bcecb:/docs/latex/wx/txtstrm.tex diff --git a/docs/latex/wx/txtstrm.tex b/docs/latex/wx/txtstrm.tex index 515ecbaf6e..70afd2cca0 100644 --- a/docs/latex/wx/txtstrm.tex +++ b/docs/latex/wx/txtstrm.tex @@ -15,6 +15,12 @@ and on a typical 32-bit computer, none of these match to the "long" type (wxInt3 is defined as int on 32-bit architectures) so that you cannot use long. To avoid problems (here and elsewhere), make use of wxInt32, wxUint32 and similar types. +If you're scanning through a file using wxTextInputStream, you should check for EOF {\bf before} +reading the next item (word / number), because otherwise the last item may get lost. +You should however be prepared to receive an empty item (empty string / zero number) at the +end of file, especially on Windows systems. This is unavoidable because most (but not all) files end +with whitespace (i.e. usually a newline). + For example: \begin{verbatim} @@ -35,53 +41,148 @@ For example: \latexignore{\rtfignore{\wxheading{Members}}} -\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamconstr} -\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}} +\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamctor} + +\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}, \param{const wxString\&}{ sep=" $\backslash$t"}, + \param{wxMBConv\&}{ conv = wxConvUTF8} } -Constructs a text stream object from an input stream. Only read methods will -be available. +Constructs a text stream associated to the given input stream. \wxheading{Parameters} -\docparam{stream}{The input stream.} +\docparam{stream}{The underlying input stream.} + +\docparam{sep}{The initial string separator characters.} + +\docparam{conv}{{\it In Unicode build only:} The encoding converter used to convert the bytes in the + underlying input stream to characters.} + -\membersection{wxTextInputStream::\destruct{wxTextInputStream}} +\membersection{wxTextInputStream::\destruct{wxTextInputStream}}\label{wxtextinputstreamdtor} \func{}{\destruct{wxTextInputStream}}{\void} Destroys the wxTextInputStream object. -\membersection{wxTextInputStream::Read8} -\func{wxUint8}{Read8}{\void} +\membersection{wxTextInputStream::Read8}\label{wxtextinputstreamread8} + +\func{wxUint8}{Read8}{\param{int}{ base = 10}} + +Reads a single unsigned byte from the stream, given in base {\it base}. + +The value of {\it base} must be comprised between $2$ and $36$, inclusive, or +be a special value $0$ which means that the usual rules of {\tt C} numbers are +applied: if the number starts with {\tt 0x} it is considered to be in base +$16$, if it starts with {\tt 0} - in base $8$ and in base $10$ otherwise. Note +that you may not want to specify the base $0$ if you are parsing the numbers +which may have leading zeroes as they can yield unexpected (to the user not +familiar with C) results. + + +\membersection{wxTextInputStream::Read8S}\label{wxtextinputstreamread8s} + +\func{wxInt8}{Read8S}{\param{int}{ base = 10}} + +Reads a single signed byte from the stream. + +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. + + +\membersection{wxTextInputStream::Read16}\label{wxtextinputstreamread16} + +\func{wxUint16}{Read16}{\param{int}{ base = 10}} + +Reads a unsigned 16 bit integer from the stream. -Reads a single byte from the stream. +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. -\membersection{wxTextInputStream::Read16} -\func{wxUint16}{Read16}{\void} +\membersection{wxTextInputStream::Read16S}\label{wxtextinputstreamread16s} -Reads a 16 bit integer from the stream. +\func{wxInt16}{Read16S}{\param{int}{ base = 10}} -\membersection{wxTextInputStream::Read32} +Reads a signed 16 bit integer from the stream. -\func{wxUint16}{Read32}{\void} +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. -Reads a 32 bit integer from the stream. -\membersection{wxTextInputStream::ReadDouble} +\membersection{wxTextInputStream::Read32}\label{wxtextinputstreamread32} + +\func{wxUint32}{Read32}{\param{int}{ base = 10}} + +Reads a 32 bit unsigned integer from the stream. + +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. + + +\membersection{wxTextInputStream::Read32S}\label{wxtextinputstreamread32s} + +\func{wxInt32}{Read32S}{\param{int}{ base = 10}} + +Reads a 32 bit signed integer from the stream. + +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. + + +\membersection{wxTextInputStream::GetChar}\label{wxtextinputstreamgetchar} + +\func{wxChar}{GetChar}{\void} + +Reads a character, returns $0$ if there are no more characters in the stream. + + +\membersection{wxTextInputStream::ReadDouble}\label{wxtextinputstreamreaddouble} \func{double}{ReadDouble}{\void} Reads a double (IEEE encoded) from the stream. -\membersection{wxTextInputStream::ReadString} -\func{wxString}{wxTextInputStream::ReadString}{\void} +\membersection{wxTextInputStream::ReadLine}\label{wxtextinputstreamreadline} + +\func{wxString}{ReadLine}{\void} + +Reads a line from the input stream and returns it (without the end of line +character). -Reads a line from the stream. A line is a string which ends with -$\backslash$n or $\backslash$r$\backslash$n or $\backslash$r. + +\membersection{wxTextInputStream::ReadString}\label{wxtextinputstreamreadstring} + +\func{wxString}{ReadString}{\void} + +{\bf NB:} This method is deprecated, use \helpref{ReadLine}{wxtextinputstreamreadline} +or \helpref{ReadWord}{wxtextinputstreamreadword} instead. + +Same as \helpref{ReadLine}{wxtextinputstreamreadline}. + + +\membersection{wxTextInputStream::ReadWord}\label{wxtextinputstreamreadword} + +\func{wxString}{ReadWord}{\void} + +Reads a word (a sequence of characters until the next separator) from the +input stream. + +\wxheading{See also} + +\helpref{SetStringSeparators}{wxtextinputstreamsetstringseparators} + + +\membersection{wxTextInputStream::SetStringSeparators}\label{wxtextinputstreamsetstringseparators} + +\func{void}{SetStringSeparators}{\param{const wxString\& }{sep}} + +Sets the characters which are used to define the word boundaries in +\helpref{ReadWord}{wxtextinputstreamreadword}. + +The default separators are the space and {\tt TAB} characters. % ---------------------------------------------------------------------------- % wxTextOutputStream @@ -106,14 +207,18 @@ You can also simulate the C++ cout class: The wxTextOutputStream writes text files (or streams) on DOS, Macintosh and Unix in their native formats (concerning the line ending). +\wxheading{Include files} + + + \latexignore{\rtfignore{\wxheading{Members}}} -\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamconstr} -\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL\_NATIVE}} +\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamctor} -Constructs a text stream object from an output stream. Only write methods will -be available. +\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL\_NATIVE}, \param{wxMBConv\&}{ conv = wxConvUTF8}} + +Constructs a text stream object associated to the given output stream. \wxheading{Parameters} @@ -121,52 +226,71 @@ be available. \docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.} -\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}} +\docparam{conv}{{\it In Unicode build only:} The object used to convert +Unicode text into ASCII characters written to the output stream.} + + +\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}\label{wxtextoutputstreamdtor} \func{}{\destruct{wxTextOutputStream}}{\void} Destroys the wxTextOutputStream object. -\membersection{wxTextOutputStream::GetMode} -\func{wxEOL}{wxTextOutputStream::GetMode}{\void} +\membersection{wxTextOutputStream::GetMode}\label{wxtextoutputstreamgetmode} + +\func{wxEOL}{GetMode}{\void} Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}. -\membersection{wxTextOutputStream::SetMode} -\func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}} +\membersection{wxTextOutputStream::PutChar}\label{wxtextoutputstreamputchar} + +\func{void}{PutChar}{{\param wxChar }{c}} + +Writes a character to the stream. + + +\membersection{wxTextOutputStream::SetMode}\label{wxtextoutputstreamsetmode} + +\func{void}{SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}} Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}. -\membersection{wxTextOutputStream::Write8} -\func{void}{wxTextOutputStream::Write8}{{\param wxUint8 }{i8}} +\membersection{wxTextOutputStream::Write8}\label{wxtextoutputstreamwrite8} + +\func{void}{Write8}{{\param wxUint8 }{i8}} Writes the single byte {\it i8} to the stream. -\membersection{wxTextOutputStream::Write16} -\func{void}{wxTextOutputStream::Write16}{{\param wxUint16 }{i16}} +\membersection{wxTextOutputStream::Write16}\label{wxtextoutputstreamwrite16} + +\func{void}{Write16}{{\param wxUint16 }{i16}} Writes the 16 bit integer {\it i16} to the stream. -\membersection{wxTextOutputStream::Write32} -\func{void}{wxTextOutputStream::Write32}{{\param wxUint32 }{i32}} +\membersection{wxTextOutputStream::Write32}\label{wxtextoutputstreamwrite32} + +\func{void}{Write32}{{\param wxUint32 }{i32}} Writes the 32 bit integer {\it i32} to the stream. -\membersection{wxTextOutputStream::WriteDouble} -\func{virtual void}{wxTextOutputStream::WriteDouble}{{\param double }{f}} +\membersection{wxTextOutputStream::WriteDouble}\label{wxtextoutputstreamwritedouble} + +\func{virtual void}{WriteDouble}{{\param double }{f}} Writes the double {\it f} to the stream using the IEEE format. -\membersection{wxTextOutputStream::WriteString} -\func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}} +\membersection{wxTextOutputStream::WriteString}\label{wxtextoutputstreamwritestring} + +\func{virtual void}{WriteString}{{\param const wxString\& }{string}} -Writes {\it string} as a line. Depending on the end-of-line mode, it adds -$\backslash$n, $\backslash$r or $\backslash$r$\backslash$n. +Writes {\it string} as a line. Depending on the end-of-line mode the end of +line ('$\backslash$n') characters in the string are converted to the correct +line ending terminator.