X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/a37a5a73c54c0e120f0a35fc02e3ac4b600a42ff..578dc95029e761a59911b7c1bc09f59384d64ddf:/src/unix/utilsunx.cpp diff --git a/src/unix/utilsunx.cpp b/src/unix/utilsunx.cpp index a3f3641c03..fd816cb920 100644 --- a/src/unix/utilsunx.cpp +++ b/src/unix/utilsunx.cpp @@ -1,5 +1,5 @@ ///////////////////////////////////////////////////////////////////////////// -// Name: utilsunx.cpp +// Name: unix/utilsunx.cpp // Purpose: generic Unix implementation of many wx functions // Author: Vadim Zeitlin // Id: $Id$ @@ -26,12 +26,45 @@ #include "wx/process.h" #include "wx/thread.h" -#include "wx/stream.h" +#include "wx/wfstream.h" + +// not only the statfs syscall is called differently depending on platform, but +// one of its incarnations, statvfs(), takes different arguments under +// different platforms and even different versions of the same system (Solaris +// 7 and 8): if you want to test for this, don't forget that the problems only +// appear if the large files support is enabled +#ifdef HAVE_STATFS + #ifdef __BSD__ + #include + #include + #else // !__BSD__ + #include + #endif // __BSD__/!__BSD__ + + #define wxStatfs statfs +#endif // HAVE_STATFS + +#ifdef HAVE_STATVFS + #include + + #define wxStatfs statvfs +#endif // HAVE_STATVFS + +#if defined(HAVE_STATFS) || defined(HAVE_STATVFS) + // WX_STATFS_T is detected by configure + #define wxStatfs_t WX_STATFS_T +#endif #if wxUSE_GUI #include "wx/unix/execute.h" #endif +// SGI signal.h defines signal handler arguments differently depending on +// whether _LANGUAGE_C_PLUS_PLUS is set or not - do set it +#if defined(__SGI__) && !defined(_LANGUAGE_C_PLUS_PLUS) + #define _LANGUAGE_C_PLUS_PLUS 1 +#endif // SGI hack + #include #include #include @@ -129,17 +162,57 @@ void wxUsleep(unsigned long milliseconds) // process management // ---------------------------------------------------------------------------- -int wxKill(long pid, wxSignal sig) +int wxKill(long pid, wxSignal sig, wxKillError *rc) { - return kill((pid_t)pid, (int)sig); + int err = kill((pid_t)pid, (int)sig); + if ( rc ) + { + switch ( errno ) + { + case 0: + *rc = wxKILL_OK; + break; + + case EINVAL: + *rc = wxKILL_BAD_SIGNAL; + break; + + case EPERM: + *rc = wxKILL_ACCESS_DENIED; + break; + + case ESRCH: + *rc = wxKILL_NO_PROCESS; + break; + + default: + // this goes against Unix98 docs so log it + wxLogDebug(_T("unexpected kill(2) return value %d"), err); + + // something else... + *rc = wxKILL_ERROR; + } + } + + return err; } #define WXEXECUTE_NARGS 127 -long wxExecute( const wxString& command, bool sync, wxProcess *process ) +long wxExecute( const wxString& command, int flags, wxProcess *process ) { wxCHECK_MSG( !command.IsEmpty(), 0, wxT("can't exec empty command") ); +#if wxUSE_THREADS + // fork() doesn't mix well with POSIX threads: on many systems the program + // deadlocks or crashes for some reason. Probably our code is buggy and + // doesn't do something which must be done to allow this to work, but I + // don't know what yet, so for now just warn the user (this is the least we + // can do) about it + wxASSERT_MSG( wxThread::IsMain(), + _T("wxExecute() can be called only from the main thread") ); +#endif // wxUSE_THREADS + int argc = 0; wxChar *argv[WXEXECUTE_NARGS]; wxString argument; @@ -196,7 +269,7 @@ long wxExecute( const wxString& command, bool sync, wxProcess *process ) argv[argc] = NULL; // do execute the command - long lRc = wxExecute(argv, sync, process); + long lRc = wxExecute(argv, flags, process); // clean up argc = 0; @@ -229,7 +302,7 @@ static wxString wxMakeShellCommand(const wxString& command) bool wxShell(const wxString& command) { - return wxExecute(wxMakeShellCommand(command), TRUE /* sync */) == 0; + return wxExecute(wxMakeShellCommand(command), wxEXEC_SYNC) == 0; } bool wxShell(const wxString& command, wxArrayString& output) @@ -239,55 +312,48 @@ bool wxShell(const wxString& command, wxArrayString& output) return wxExecute(wxMakeShellCommand(command), output); } +// Shutdown or reboot the PC +bool wxShutdown(wxShutdownFlags wFlags) +{ + wxChar level; + switch ( wFlags ) + { + case wxSHUTDOWN_POWEROFF: + level = _T('0'); + break; + + case wxSHUTDOWN_REBOOT: + level = _T('6'); + break; + + default: + wxFAIL_MSG( _T("unknown wxShutdown() flag") ); + return FALSE; + } + + return system(wxString::Format(_T("init %c"), level).mb_str()) == 0; +} + + #if wxUSE_GUI void wxHandleProcessTermination(wxEndProcessData *proc_data) { - int pid = (proc_data->pid > 0) ? proc_data->pid : -(proc_data->pid); - - // waitpid is POSIX so should be available everywhere, however on older - // systems wait() might be used instead in a loop (until the right pid - // terminates) - int status = 0; - int rc; - - // wait for child termination and if waitpid() was interrupted, try again - do + // notify user about termination if required + if ( proc_data->process ) { - rc = waitpid(pid, &status, 0); + proc_data->process->OnTerminate(proc_data->pid, proc_data->exitcode); } - while ( rc == -1 && errno == EINTR ); - - if( rc == -1 || ! (WIFEXITED(status) || WIFSIGNALED(status)) ) + // clean up + if ( proc_data->pid > 0 ) { - wxLogSysError(_("Waiting for subprocess termination failed")); - /* AFAIK, this can only happen if something went wrong within - wxGTK, i.e. due to a race condition or some serious bug. - After having fixed the order of statements in - GTK_EndProcessDetector(). (KB) - */ + delete proc_data; } else { - // notify user about termination if required - if (proc_data->process) - { - proc_data->process->OnTerminate(proc_data->pid, - WEXITSTATUS(status)); - } - // clean up - if ( proc_data->pid > 0 ) - { - delete proc_data; - } - else - { - // wxExecute() will know about it - proc_data->exitcode = status; - - proc_data->pid = 0; - } + // let wxExecute() know that the process has terminated + proc_data->pid = 0; } } @@ -297,107 +363,163 @@ void wxHandleProcessTermination(wxEndProcessData *proc_data) // wxStream classes to support IO redirection in wxExecute // ---------------------------------------------------------------------------- -class wxProcessFileInputStream : public wxInputStream -{ -public: - wxProcessFileInputStream(int fd) { m_fd = fd; } - ~wxProcessFileInputStream() { close(m_fd); } - - virtual bool Eof() const; - -protected: - size_t OnSysRead(void *buffer, size_t bufsize); +#if wxUSE_STREAMS -protected: - int m_fd; -}; +// ---------------------------------------------------------------------------- +// wxPipeInputStream: stream for reading from a pipe +// ---------------------------------------------------------------------------- -class wxProcessFileOutputStream : public wxOutputStream +class wxPipeInputStream : public wxFileInputStream { public: - wxProcessFileOutputStream(int fd) { m_fd = fd; } - ~wxProcessFileOutputStream() { close(m_fd); } + wxPipeInputStream(int fd) : wxFileInputStream(fd) { } -protected: - size_t OnSysWrite(const void *buffer, size_t bufsize); + // return TRUE if the pipe is still opened + bool IsOpened() const { return !Eof(); } -protected: - int m_fd; + // return TRUE if we have anything to read, don't block + virtual bool CanRead() const; }; -bool wxProcessFileInputStream::Eof() const +bool wxPipeInputStream::CanRead() const { if ( m_lasterror == wxSTREAM_EOF ) - return TRUE; + return FALSE; // check if there is any input available struct timeval tv; tv.tv_sec = 0; tv.tv_usec = 0; + const int fd = m_file->fd(); + fd_set readfds; FD_ZERO(&readfds); - FD_SET(m_fd, &readfds); - switch ( select(m_fd + 1, &readfds, NULL, NULL, &tv) ) + FD_SET(fd, &readfds); + switch ( select(fd + 1, &readfds, NULL, NULL, &tv) ) { case -1: wxLogSysError(_("Impossible to get child process input")); // fall through case 0: - return TRUE; + return FALSE; default: wxFAIL_MSG(_T("unexpected select() return value")); // still fall through case 1: - // input available: check if there is any - return wxInputStream::Eof(); + // input available -- or maybe not, as select() returns 1 when a + // read() will complete without delay, but it could still not read + // anything + return !Eof(); } } -size_t wxProcessFileInputStream::OnSysRead(void *buffer, size_t bufsize) +// define this to let wxexec.cpp know that we know what we're doing +#define _WX_USED_BY_WXEXECUTE_ +#include "../common/execcmn.cpp" + +#endif // wxUSE_STREAMS + +// ---------------------------------------------------------------------------- +// wxPipe: this encapsulates pipe() system call +// ---------------------------------------------------------------------------- + +class wxPipe { - int ret = read(m_fd, buffer, bufsize); - if ( ret == 0 ) +public: + // the symbolic names for the pipe ends + enum Direction { - m_lasterror = wxSTREAM_EOF; - } - else if ( ret == -1 ) + Read, + Write + }; + + enum { - m_lasterror = wxSTREAM_READ_ERROR; - ret = 0; - } - else + INVALID_FD = -1 + }; + + // default ctor doesn't do anything + wxPipe() { m_fds[Read] = m_fds[Write] = INVALID_FD; } + + // create the pipe, return TRUE if ok, FALSE on error + bool Create() { - m_lasterror = wxSTREAM_NOERROR; + if ( pipe(m_fds) == -1 ) + { + wxLogSysError(_("Pipe creation failed")); + + return FALSE; + } + + return TRUE; } - return ret; -} + // return TRUE if we were created successfully + bool IsOk() const { return m_fds[Read] != INVALID_FD; } -size_t wxProcessFileOutputStream::OnSysWrite(const void *buffer, size_t bufsize) -{ - int ret = write(m_fd, buffer, bufsize); - if ( ret == -1 ) + // return the descriptor for one of the pipe ends + int operator[](Direction which) const { - m_lasterror = wxSTREAM_WRITE_ERROR; - ret = 0; + wxASSERT_MSG( which >= 0 && (size_t)which < WXSIZEOF(m_fds), + _T("invalid pipe index") ); + + return m_fds[which]; } - else + + // detach a descriptor, meaning that the pipe dtor won't close it, and + // return it + int Detach(Direction which) { - m_lasterror = wxSTREAM_NOERROR; + wxASSERT_MSG( which >= 0 && (size_t)which < WXSIZEOF(m_fds), + _T("invalid pipe index") ); + + int fd = m_fds[which]; + m_fds[which] = INVALID_FD; + + return fd; } - return ret; -} + // close the pipe descriptors + void Close() + { + for ( size_t n = 0; n < WXSIZEOF(m_fds); n++ ) + { + if ( m_fds[n] != INVALID_FD ) + close(m_fds[n]); + } + } + + // dtor closes the pipe descriptors + ~wxPipe() { Close(); } + +private: + int m_fds[2]; +}; + +// ---------------------------------------------------------------------------- +// wxExecute: the real worker function +// ---------------------------------------------------------------------------- + +#ifdef __VMS + #pragma message disable codeunreachable +#endif long wxExecute(wxChar **argv, - bool sync, + int flags, wxProcess *process) { - wxCHECK_MSG( *argv, 0, wxT("can't exec empty command") ); + // for the sync execution, we return -1 to indicate failure, but for async + // case we return 0 which is never a valid PID + // + // we define this as a macro, not a variable, to avoid compiler warnings + // about "ERROR_RETURN_CODE value may be clobbered by fork()" + #define ERROR_RETURN_CODE ((flags & wxEXEC_SYNC) ? -1 : 0) + + wxCHECK_MSG( *argv, ERROR_RETURN_CODE, wxT("can't exec empty command") ); #if wxUSE_UNICODE int mb_argc = 0; @@ -424,83 +546,68 @@ long wxExecute(wxChar **argv, #if wxUSE_GUI // create pipes - int end_proc_detect[2]; - if ( pipe(end_proc_detect) == -1 ) + wxPipe pipeEndProcDetect; + if ( !pipeEndProcDetect.Create() ) { - wxLogSysError( _("Pipe creation failed") ); wxLogError( _("Failed to execute '%s'\n"), *argv ); ARGS_CLEANUP; - return 0; + return ERROR_RETURN_CODE; } #endif // wxUSE_GUI - int pipeIn[2]; - int pipeOut[2]; - pipeIn[0] = pipeIn[1] = - pipeOut[0] = pipeOut[1] = -1; + // pipes for inter process communication + wxPipe pipeIn, // stdin + pipeOut, // stdout + pipeErr; // stderr if ( process && process->IsRedirected() ) { - if ( pipe(pipeIn) == -1 || pipe(pipeOut) == -1 ) + if ( !pipeIn.Create() || !pipeOut.Create() || !pipeErr.Create() ) { -#if wxUSE_GUI - // free previously allocated resources - close(end_proc_detect[0]); - close(end_proc_detect[1]); -#endif // wxUSE_GUI - - wxLogSysError( _("Pipe creation failed") ); wxLogError( _("Failed to execute '%s'\n"), *argv ); ARGS_CLEANUP; - return 0; + return ERROR_RETURN_CODE; } } // fork the process -#ifdef HAVE_VFORK - pid_t pid = vfork(); + // + // NB: do *not* use vfork() here, it completely breaks this code for some + // reason under Solaris (and maybe others, although not under Linux) + // But on OpenVMS we do not have fork so we have to use vfork and + // cross our fingers that it works. +#ifdef __VMS + pid_t pid = vfork(); #else - pid_t pid = fork(); + pid_t pid = fork(); #endif - - if ( pid == -1 ) // error? + if ( pid == -1 ) // error? { -#if wxUSE_GUI - close(end_proc_detect[0]); - close(end_proc_detect[1]); - close(pipeIn[0]); - close(pipeIn[1]); - close(pipeOut[0]); - close(pipeOut[1]); -#endif // wxUSE_GUI - wxLogSysError( _("Fork failed") ); ARGS_CLEANUP; - return 0; + return ERROR_RETURN_CODE; } else if ( pid == 0 ) // we're in child { -#if wxUSE_GUI - close(end_proc_detect[0]); // close reading side -#endif // wxUSE_GUI - // These lines close the open file descriptors to to avoid any // input/output which might block the process or irritate the user. If // one wants proper IO for the subprocess, the right thing to do is to // start an xterm executing it. - if ( !sync ) + if ( !(flags & wxEXEC_SYNC) ) { for ( int fd = 0; fd < FD_SETSIZE; fd++ ) { - if ( fd == pipeIn[0] || fd == pipeOut[1] + if ( fd == pipeIn[wxPipe::Read] + || fd == pipeOut[wxPipe::Write] + || fd == pipeErr[wxPipe::Write] #if wxUSE_GUI - || fd == end_proc_detect[1] + || fd == pipeEndProcDetect[wxPipe::Write] #endif // wxUSE_GUI ) { @@ -508,52 +615,114 @@ long wxExecute(wxChar **argv, continue; } - // leave stderr opened too, it won't do any hurm + // leave stderr opened too, it won't do any harm if ( fd != STDERR_FILENO ) close(fd); } } - // redirect stdio and stdout - // (TODO: what about stderr?) - if ( pipeIn[0] != -1 ) +#if !defined(__VMS) && !defined(__EMX__) + if ( flags & wxEXEC_MAKE_GROUP_LEADER ) + { + // Set process group to child process' pid. Then killing -pid + // of the parent will kill the process and all of its children. + setsid(); + } +#endif // !__VMS + +#if wxUSE_GUI + // reading side can be safely closed but we should keep the write one + // opened + pipeEndProcDetect.Detach(wxPipe::Write); + pipeEndProcDetect.Close(); +#endif // wxUSE_GUI + + // redirect stdin, stdout and stderr + if ( pipeIn.IsOk() ) { - if ( dup2(pipeIn[0], STDIN_FILENO) == -1 || - dup2(pipeOut[1], STDOUT_FILENO) == -1 ) + if ( dup2(pipeIn[wxPipe::Read], STDIN_FILENO) == -1 || + dup2(pipeOut[wxPipe::Write], STDOUT_FILENO) == -1 || + dup2(pipeErr[wxPipe::Write], STDERR_FILENO) == -1 ) { - wxLogSysError(_("Failed to redirect child process " - "input/output")); + wxLogSysError(_("Failed to redirect child process input/output")); } - close(pipeIn[0]); - close(pipeOut[1]); + pipeIn.Close(); + pipeOut.Close(); + pipeErr.Close(); } execvp (*mb_argv, mb_argv); + fprintf(stderr, "execvp("); + for ( char **ppc = mb_argv; *ppc; ppc++ ) + fprintf(stderr, "%s%s", ppc == mb_argv ? "" : ", ", *ppc); + fprintf(stderr, ") failed with error %d!\n", errno); + // there is no return after successful exec() _exit(-1); + + // some compilers complain about missing return - of course, they + // should know that exit() doesn't return but what else can we do if + // they don't? + // + // and, sure enough, other compilers complain about unreachable code + // after exit() call, so we can just always have return here... +#if defined(__VMS) || defined(__INTEL_COMPILER) + return 0; +#endif } else // we're in parent { ARGS_CLEANUP; - // pipe initialization: construction of the wxStreams + // prepare for IO redirection + +#if wxUSE_STREAMS + // the input buffer bufOut is connected to stdout, this is why it is + // called bufOut and not bufIn + wxStreamTempInputBuffer bufOut, + bufErr; +#endif // wxUSE_STREAMS + if ( process && process->IsRedirected() ) { - // These two streams are relative to this process. - wxOutputStream *outStream = new wxProcessFileOutputStream(pipeIn[1]); - wxInputStream *inStream = new wxProcessFileInputStream(pipeOut[0]); - close(pipeIn[0]); // close reading side - close(pipeOut[1]); // close writing side +#if wxUSE_STREAMS + wxOutputStream *inStream = + new wxFileOutputStream(pipeIn.Detach(wxPipe::Write)); + + wxPipeInputStream *outStream = + new wxPipeInputStream(pipeOut.Detach(wxPipe::Read)); + + wxPipeInputStream *errStream = + new wxPipeInputStream(pipeErr.Detach(wxPipe::Read)); - process->SetPipeStreams(inStream, outStream); + process->SetPipeStreams(outStream, inStream, errStream); + + bufOut.Init(outStream); + bufErr.Init(errStream); +#endif // wxUSE_STREAMS } -#if wxUSE_GUI + if ( pipeIn.IsOk() ) + { + pipeIn.Close(); + pipeOut.Close(); + pipeErr.Close(); + } + +#if wxUSE_GUI && !defined(__WXMICROWIN__) wxEndProcessData *data = new wxEndProcessData; - if ( sync ) + data->tag = wxAddProcessCallback + ( + data, + pipeEndProcDetect.Detach(wxPipe::Read) + ); + + pipeEndProcDetect.Close(); + + if ( flags & wxEXEC_SYNC ) { // we may have process for capturing the program output, but it's // not used in wxEndProcessData in the case of sync execution @@ -561,16 +730,23 @@ long wxExecute(wxChar **argv, // sync execution: indicate it by negating the pid data->pid = -pid; - data->tag = wxAddProcessCallback(data, end_proc_detect[0]); - - close(end_proc_detect[1]); // close writing side wxBusyCursor bc; wxWindowDisabler wd; - // it will be set to 0 from GTK_EndProcessDetector - while (data->pid != 0) + // data->pid will be set to 0 from GTK_EndProcessDetector when the + // process terminates + while ( data->pid != 0 ) + { +#if wxUSE_STREAMS + bufOut.Update(); + bufErr.Update(); +#endif // wxUSE_STREAMS + + // give GTK+ a chance to call GTK_EndProcessDetector here and + // also repaint the GUI wxYield(); + } int exitcode = data->exitcode; @@ -585,14 +761,13 @@ long wxExecute(wxChar **argv, // will be deleted in GTK_EndProcessDetector data->process = process; data->pid = pid; - data->tag = wxAddProcessCallback(data, end_proc_detect[0]); - - close(end_proc_detect[1]); // close writing side return pid; } #else // !wxUSE_GUI - wxASSERT_MSG( sync, wxT("async execution not supported yet") ); + + wxASSERT_MSG( flags & wxEXEC_SYNC, + wxT("async execution not supported yet") ); int exitcode = 0; if ( waitpid(pid, &exitcode, 0) == -1 || !WIFEXITED(exitcode) ) @@ -604,11 +779,16 @@ long wxExecute(wxChar **argv, #endif // wxUSE_GUI } - return 0; - - #undef ARGS_CLEANUP + return ERROR_RETURN_CODE; } +#ifdef __VMS + #pragma message enable codeunreachable +#endif + +#undef ERROR_RETURN_CODE +#undef ARGS_CLEANUP + // ---------------------------------------------------------------------------- // file and directory functions // ---------------------------------------------------------------------------- @@ -616,9 +796,14 @@ long wxExecute(wxChar **argv, const wxChar* wxGetHomeDir( wxString *home ) { *home = wxGetUserHome( wxString() ); + wxString tmp; if ( home->IsEmpty() ) *home = wxT("/"); - +#ifdef __VMS + tmp = *home; + if ( tmp.Last() != wxT(']')) + if ( tmp.Last() != wxT('/')) *home << wxT('/'); +#endif return home->c_str(); } @@ -636,7 +821,12 @@ char *wxGetUserHome( const wxString &user ) if ((ptr = wxGetenv(wxT("HOME"))) != NULL) { +#if wxUSE_UNICODE + wxWCharBuffer buffer( ptr ); + return buffer; +#else return ptr; +#endif } if ((ptr = wxGetenv(wxT("USER"))) != NULL || (ptr = wxGetenv(wxT("LOGNAME"))) != NULL) { @@ -763,7 +953,7 @@ bool wxGetUserName(wxChar *buf, int sz) if ((who = getpwuid (getuid ())) != NULL) { // pw_gecos field in struct passwd is not standard -#if HAVE_PW_GECOS +#ifdef HAVE_PW_GECOS char *comma = strchr(who->pw_gecos, ','); if (comma) *comma = '\0'; // cut off non-name comment fields @@ -777,12 +967,153 @@ bool wxGetUserName(wxChar *buf, int sz) return FALSE; } +#ifndef __WXMAC__ wxString wxGetOsDescription() { #ifndef WXWIN_OS_DESCRIPTION #error WXWIN_OS_DESCRIPTION should be defined in config.h by configure #else - return WXWIN_OS_DESCRIPTION; + return wxString::FromAscii( WXWIN_OS_DESCRIPTION ); +#endif +} +#endif + +// this function returns the GUI toolkit version in GUI programs, but OS +// version in non-GUI ones +#if !wxUSE_GUI + +int wxGetOsVersion(int *majorVsn, int *minorVsn) +{ + int major, minor; + char name[256]; + + if ( sscanf(WXWIN_OS_DESCRIPTION, "%s %d.%d", name, &major, &minor) != 3 ) + { + // unreckognized uname string format + major = minor = -1; + } + + if ( majorVsn ) + *majorVsn = major; + if ( minorVsn ) + *minorVsn = minor; + + return wxUNIX; +} + +#endif // !wxUSE_GUI + +unsigned long wxGetProcessId() +{ + return (unsigned long)getpid(); +} + +long wxGetFreeMemory() +{ +#if defined(__LINUX__) + // get it from /proc/meminfo + FILE *fp = fopen("/proc/meminfo", "r"); + if ( fp ) + { + long memFree = -1; + + char buf[1024]; + if ( fgets(buf, WXSIZEOF(buf), fp) && fgets(buf, WXSIZEOF(buf), fp) ) + { + long memTotal, memUsed; + sscanf(buf, "Mem: %ld %ld %ld", &memTotal, &memUsed, &memFree); + } + + fclose(fp); + + return memFree; + } +#elif defined(__SUN__) && defined(_SC_AVPHYS_PAGES) + return sysconf(_SC_AVPHYS_PAGES)*sysconf(_SC_PAGESIZE); +//#elif defined(__FREEBSD__) -- might use sysctl() to find it out, probably +#endif + + // can't find it out + return -1; +} + +bool wxGetDiskSpace(const wxString& path, wxLongLong *pTotal, wxLongLong *pFree) +{ +#if defined(HAVE_STATFS) || defined(HAVE_STATVFS) + // the case to "char *" is needed for AIX 4.3 + wxStatfs_t fs; + if ( wxStatfs((char *)(const char*)path.fn_str(), &fs) != 0 ) + { + wxLogSysError( wxT("Failed to get file system statistics") ); + + return FALSE; + } + + // under Solaris we also have to use f_frsize field instead of f_bsize + // which is in general a multiple of f_frsize +#ifdef HAVE_STATVFS + wxLongLong blockSize = fs.f_frsize; +#else // HAVE_STATFS + wxLongLong blockSize = fs.f_bsize; +#endif // HAVE_STATVFS/HAVE_STATFS + + if ( pTotal ) + { + *pTotal = wxLongLong(fs.f_blocks) * blockSize; + } + + if ( pFree ) + { + *pFree = wxLongLong(fs.f_bavail) * blockSize; + } + + return TRUE; +#else // !HAVE_STATFS && !HAVE_STATVFS + return FALSE; +#endif // HAVE_STATFS +} + +// ---------------------------------------------------------------------------- +// env vars +// ---------------------------------------------------------------------------- + +bool wxGetEnv(const wxString& var, wxString *value) +{ + // wxGetenv is defined as getenv() + wxChar *p = wxGetenv(var); + if ( !p ) + return FALSE; + + if ( value ) + { + *value = p; + } + + return TRUE; +} + +bool wxSetEnv(const wxString& variable, const wxChar *value) +{ +#if defined(HAVE_SETENV) + return setenv(variable.mb_str(), + value ? (const char *)wxString(value).mb_str() + : NULL, + 1 /* overwrite */) == 0; +#elif defined(HAVE_PUTENV) + wxString s = variable; + if ( value ) + s << _T('=') << value; + + // transform to ANSI + const char *p = s.mb_str(); + + // the string will be free()d by libc + char *buf = (char *)malloc(strlen(p) + 1); + strcpy(buf, p); + + return putenv(buf) == 0; +#else // no way to set an env var + return FALSE; #endif } @@ -794,7 +1125,7 @@ wxString wxGetOsDescription() #include -static void wxFatalSignalHandler(int signal) +extern "C" void wxFatalSignalHandler(wxTYPE_SA_HANDLER) { if ( wxTheApp ) { @@ -863,6 +1194,8 @@ bool wxHandleFatalExceptions(bool doit) // error and debug output routines (deprecated, use wxLog) // ---------------------------------------------------------------------------- +#if WXWIN_COMPATIBILITY_2_2 + void wxDebugMsg( const char *format, ... ) { va_list ap; @@ -889,3 +1222,5 @@ void wxFatalError( const wxString &msg, const wxString &title ) exit(3); // the same exit code as for abort() } +#endif // WXWIN_COMPATIBILITY_2_2 +